HPN-ICF-HGMP-MIB

File: HPN-ICF-HGMP-MIB.mib (60590 bytes)

Imported modules

HPN-ICF-OID-MIB

Imported symbols

hpnicfRhw	IpAddress	Integer32
OBJECT-TYPE	MODULE-IDENTITY	OBJECT-IDENTITY
NOTIFICATION-TYPE	Counter32	Unsigned32
RowStatus	MacAddress	TEXTUAL-CONVENTION
DisplayString

Defined Types

HpnicfHgmpGrpMemberEntry
SEQUENCE
	hpnicfhgmpGrpMemberDeviceId	OCTET STRING
	hpnicfhgmpGrpMemberSerial	Integer32
	hpnicfhgmpGrpMemberIpAddr	IpAddress
	hpnicfhgmpGrpMemberName	OCTET STRING
	hpnicfhgmpGrpMemberPassword	OCTET STRING
	hpnicfhgmpGrpMemberPlatform	OCTET STRING
	hpnicfhgmpGrpMemberStatus	INTEGER
	hpnicfhgmpGrpMemberDisconCount	Integer32
	hpnicfhgmpGrpMemberEnrollTime	Integer32
	hpnicfhgmpGrpMemberOperate	RowStatus

HpnicfHgmpMemberResetEntry
SEQUENCE
	hpnicfhgmpMemberResetMAC	OCTET STRING
	hpnicfhgmpMemberEraseflash	INTEGER

HpnicfHgmpWhitelistEntry
SEQUENCE
	hpnicfhgmpWhitelistDeviceId	OCTET STRING
	hpnicfhgmpWhitelistSerial	Integer32
	hpnicfhgmpWhitelistRowStatus	RowStatus

HpnicfHgmpWhitelistNbEntry
SEQUENCE
	hpnicfhgmpWhitelistNbIndex	Integer32
	hpnicfhgmpWhitelistNbDeviceId	OCTET STRING
	hpnicfhgmpWhitelistPortName	OCTET STRING
	hpnicfhgmpWhitelistNbPortName	OCTET STRING

HpnicfHgmpBlacklistEntry
SEQUENCE
	hpnicfhgmpBlacklistDeviceId	OCTET STRING
	hpnicfhgmpBlacklistAccessDeviceId	OCTET STRING
	hpnicfhgmpBlacklistAccessPortName	OCTET STRING
	hpnicfhgmpBlacklistRowStatus	RowStatus

HpnicfHgmpMemberPriPortEntry
SEQUENCE
	hpnicfhgmpMemberDevId	OCTET STRING
	hpnicfhgmpMemberPriPortProto	Unsigned32
	hpnicfhgmpMemberPriPortProtoDescr	DisplayString
	hpnicfhgmpMemberPriPortNum	Unsigned32

HpnicfHgmpStackMemberEntry
SEQUENCE
	hpnicfhgmpStackMemberDeviceId	OCTET STRING
	hpnicfhgmpStackMemberSerial	Integer32
	hpnicfhgmpStackMemberIpAddr	IpAddress
	hpnicfhgmpStackMemberName	OCTET STRING
	hpnicfhgmpStackMemberPassword	OCTET STRING
	hpnicfhgmpStackMemberPlatform	OCTET STRING
	hpnicfhgmpStackMemberStatus	INTEGER
	hpnicfhgmpStackMemberDisconCount	Integer32
	hpnicfhgmpStackMemberEnrollTime	Integer32

HpnicfNDPPortEntry
SEQUENCE
	hpnicfNDPIfIndex	Integer32
	hpnicfNDPPortStatus	INTEGER

HpnicfNDPPortNbEntry
SEQUENCE
	hpnicfNDPPortNbDeviceId	OCTET STRING
	hpnicfNDPPortNbPortName	OCTET STRING
	hpnicfNDPPortNbDeviceName	OCTET STRING
	hpnicfNDPPortNbPortMode	INTEGER
	hpnicfNDPPortNbProductVer	OCTET STRING
	hpnicfNDPPortNbHardVer	OCTET STRING
	hpnicfNDPPortNbBootromVer	OCTET STRING
	hpnicfNDPPortNbSoftVer	OCTET STRING
	hpnicfNDPPortNbAgingtime	Integer32

HpnicfHgmpNTDPInterfaceEntry
SEQUENCE
	hpnicfhgmpNTDPInterfaceIfIndex	Integer32
	hpnicfhgmpNTDPInterfaceEnable	INTEGER

HpnicfHgmpNTDPCacheEntry
SEQUENCE
	hpnicfhgmpNTDPCacheHashIndex	Integer32
	hpnicfhgmpNTDPCacheDeviceID	OCTET STRING
	hpnicfhgmpNTDPCacheClusterName	OCTET STRING
	hpnicfhgmpNTDPCacheClusterRole	INTEGER
	hpnicfhgmpNTDPCacheCapabilities	INTEGER
	hpnicfhgmpNTDPCacheVersion	OCTET STRING
	hpnicfhgmpNTDPCachePlatform	OCTET STRING
	hpnicfhgmpNTDPCacheMngVLAN	INTEGER
	hpnicfhgmpNTDPCacheHop	INTEGER

HpnicfHgmpNTDPTopEntry
SEQUENCE
	hpnicfhgmpNTDPTopHashIndex	Integer32
	hpnicfhgmpNTDPTopEdgeStartDevID	OCTET STRING
	hpnicfhgmpNTDPTopEdgeIndex	Integer32
	hpnicfhgmpNTDPTopEdgeEndDevID	OCTET STRING
	hpnicfhgmpNTDPTopEdgeStartPort	OCTET STRING
	hpnicfhgmpNTDPTopEdgeStartPortFullDuplex	INTEGER
	hpnicfhgmpNTDPTopEdgeStartPortSpeed	Integer32
	hpnicfhgmpNTDPTopEdgeEndPort	OCTET STRING
	hpnicfhgmpNTDPTopLinkStatus	INTEGER

Defined Values

hpnicfHgmp		1.3.6.1.4.1.11.2.14.11.15.8.7
This MIB contains objects to manage the hpnicfhgmp operations, which are used on lanswitch products.
MODULE-IDENTITY

hpnicfClusterObject		1.3.6.1.4.1.11.2.14.11.15.8.7.1
This MIB contains objects to manage the cluster operations, which are used on lanswitch products.
Status: current	Access: read-only
OBJECT-IDENTITY

hpnicfhgmpSetVLANSecurity		1.3.6.1.4.1.11.2.14.11.15.8.7.1.1
Configure whether to perform the VLAN check inside the cluster.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noSecurity(0), security(1)

hpnicfhgmpHandShakeInterval		1.3.6.1.4.1.11.2.14.11.15.8.7.1.2
Handshaking interval of the cluster member switches.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..255

hpnicfhgmpHandShakeHoldtime		1.3.6.1.4.1.11.2.14.11.15.8.7.1.3
Holdtime of administrator switch and member switch in the cluster.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..255

hpnicfhgmpGrpMemberTableChange		1.3.6.1.4.1.11.2.14.11.15.8.7.1.4
Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hpnicfhgmpMemberDisconRate		1.3.6.1.4.1.11.2.14.11.15.8.7.1.5
Disconnection times of the member and administrator switches divided by member number times 1000.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfhgmpCmdLanswitchFlag		1.3.6.1.4.1.11.2.14.11.15.8.7.1.6
Administrator switch flag
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	false(0), true(1)

hpnicfhgmpCmdClusterName		1.3.6.1.4.1.11.2.14.11.15.8.7.1.7
Cluster name of the administrator switch
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..8)

hpnicfhgmpMngPriIpSegCMIP		1.3.6.1.4.1.11.2.14.11.15.8.7.1.8
The private management IP address of the administrator switch, which can not be modified after the cluster has been created.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hpnicfhgmpMngPriIpMask		1.3.6.1.4.1.11.2.14.11.15.8.7.1.9
The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hpnicfhgmpFtpServer		1.3.6.1.4.1.11.2.14.11.15.8.7.1.10
The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hpnicfhgmpTftpServer		1.3.6.1.4.1.11.2.14.11.15.8.7.1.11
The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hpnicfhgmpSnmpHost		1.3.6.1.4.1.11.2.14.11.15.8.7.1.12
The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hpnicfhgmpLogHost		1.3.6.1.4.1.11.2.14.11.15.8.7.1.13
Log host of the cluster, which can only be configured and accessed on the administrator switch.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hpnicfhgmpGrpMemberTable		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14
Table of cluster member switches
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpGrpMemberEntry

hpnicfhgmpGrpMemberEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpGrpMemberEntry

hpnicfhgmpGrpMemberDeviceId		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.1
4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..10)

hpnicfhgmpGrpMemberSerial		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.2
When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..2047

hpnicfhgmpGrpMemberIpAddr		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.3
The private IP addresses of the member switches for the communication inside the cluster.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hpnicfhgmpGrpMemberName		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.4
Hostname of the member switch
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hpnicfhgmpGrpMemberPassword		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.5
Member password for joining a cluster
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hpnicfhgmpGrpMemberPlatform		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.6
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfhgmpGrpMemberStatus		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.7
Member status on the administrator switch, use for displaying the network management status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), fault(1)

hpnicfhgmpGrpMemberDisconCount		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.8
Count of inside communication disconnection between the member switch and the administrator switch.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfhgmpGrpMemberEnrollTime		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.9
Enrollment time of the member, measured in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfhgmpGrpMemberOperate		1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.10
Operation indication field, indicates the operation of adding/removing a member by the network management agent.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

hpnicfhgmpMemberResetTable		1.3.6.1.4.1.11.2.14.11.15.8.7.1.15
Reset a member switch in the cluster.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpMemberResetEntry

hpnicfhgmpMemberResetEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpMemberResetEntry

hpnicfhgmpMemberResetMAC		1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.1
The management MAC address of the switch to be reset, which is the unique identifier of the switch.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..6)

hpnicfhgmpMemberEraseflash		1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.2
Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noErase(0), erase(1), cannotget(65535)

hpnicfhgmpEventsV2		1.3.6.1.4.1.11.2.14.11.15.8.7.1.0
Definition point for cluster notifications.
Status: current	Access: read-write
OBJECT-IDENTITY

hpnicfhgmpMemberfailure		1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.1
When a cluster member failure, send a snmp trap to the network management.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfhgmpMemberRecover		1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.2
When a cluster member recover, send a snmp trap to the network management.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfhgmpMemberStatusChange		1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.3
When a cluster member status change, send a snmp trap to the network management.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfhgmpNetTopChange		1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.4
When net topology of this cluster change, send a snmp trap to the network management.
Status: current	Access: read-write
NOTIFICATION-TYPE

hpnicfhgmpClusterRole		1.3.6.1.4.1.11.2.14.11.15.8.7.1.16
This switch's role in cluster.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	roleCMDSW(1), roleMEMBERSW(2), roleBAKSW(3), roleCASW(16), roleUNISW(17)

hpnicfhgmpClusterMaxPoolNum		1.3.6.1.4.1.11.2.14.11.15.8.7.1.17
Max switch members that the cluster can support(include administrator switch).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfhgmpClusterCmdSwMac		1.3.6.1.4.1.11.2.14.11.15.8.7.1.18
The MAC address of administrator switch. It will be filled with zero when not be a member of cluster.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..6)

hpnicfhgmpRun		1.3.6.1.4.1.11.2.14.11.15.8.7.1.19
Enable cluster on this switch.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	false(0), true(1)

hpnicfhgmpProtocolMac		1.3.6.1.4.1.11.2.14.11.15.8.7.1.22
OBJECT IDENTIFIER

hpnicfhgmpClusterProtocolMac		1.3.6.1.4.1.11.2.14.11.15.8.7.1.22.1
Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

hpnicfhgmpTopologyManagement		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23
OBJECT IDENTIFIER

hpnicfhgmpWhitelistTable		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1
Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpWhitelistEntry

hpnicfhgmpWhitelistEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1
Entry items
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpWhitelistEntry

hpnicfhgmpWhitelistDeviceId		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.1
Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(10)

hpnicfhgmpWhitelistSerial		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.2
When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..2047 \| 65535

hpnicfhgmpWhitelistRowStatus		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.3
The row status of this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfhgmpWhitelistNbTable		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2
Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpWhitelistNbEntry

hpnicfhgmpWhitelistNbEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1
Entry items
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpWhitelistNbEntry

hpnicfhgmpWhitelistNbIndex		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.1
Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hpnicfhgmpWhitelistNbDeviceId		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.2
Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(10)

hpnicfhgmpWhitelistPortName		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.3
The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hpnicfhgmpWhitelistNbPortName		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.4
The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hpnicfhgmpBlacklistTable		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3
Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpBlacklistEntry

hpnicfhgmpBlacklistEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1
Entry items
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpBlacklistEntry

hpnicfhgmpBlacklistDeviceId		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.1
Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(10)

hpnicfhgmpBlacklistAccessDeviceId		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.2
Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(10)

hpnicfhgmpBlacklistAccessPortName		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.3
The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hpnicfhgmpBlacklistRowStatus		1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.4
The row status of this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfhgmpMemberPriPortTable		1.3.6.1.4.1.11.2.14.11.15.8.7.1.24
This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpMemberPriPortEntry

hpnicfhgmpMemberPriPortEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1
Information about a specified member private port entry. The indexes of the entry are hpnicfhgmpGrpMemberDevId and hpnicfhgmpMemberPriPortProto, which indicate entries in the table.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpMemberPriPortEntry

hpnicfhgmpMemberDevId		1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.1
Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..10)

hpnicfhgmpMemberPriPortProto		1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.2
The index of this table. Each instance value of this object corresponds to a different protocol.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

hpnicfhgmpMemberPriPortProtoDescr		1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.3
It describes the hpnicfhgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hpnicfhgmpMemberPriPortProtocol value is 1.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

hpnicfhgmpMemberPriPortNum		1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.4
The private port number of member switch, used by specified hpnicfhgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hpnicfhgmpGrpMemberIpAddr.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hpnicfStackObject		1.3.6.1.4.1.11.2.14.11.15.8.7.2
This MIB contains objects to manage the stack operations, which is used on lanswitch products.
Status: current	Access: read-only
OBJECT-IDENTITY

hpnicfhgmpStackMemberTableChange		1.3.6.1.4.1.11.2.14.11.15.8.7.2.1
Change identifier of the stack member table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hpnicfhgmpStackMemberDisconRate		1.3.6.1.4.1.11.2.14.11.15.8.7.2.2
Disconnection rate of the stack member switches.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfhgmpMainLanswitchFlag		1.3.6.1.4.1.11.2.14.11.15.8.7.2.3
The status of the local switch in the stack.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	false(0), true(1)

hpnicfhgmpStackIpPoolStartIP		1.3.6.1.4.1.11.2.14.11.15.8.7.2.4
The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hpnicfhgmpStackIpPoolLength		1.3.6.1.4.1.11.2.14.11.15.8.7.2.5
The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..200

hpnicfhgmpStackIpPoolMask		1.3.6.1.4.1.11.2.14.11.15.8.7.2.10
The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

hpnicfhgmpStackMemberTable		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6
Stack member table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpStackMemberEntry

hpnicfhgmpStackMemberEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpStackMemberEntry

hpnicfhgmpStackMemberDeviceId		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.1
2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..10)

hpnicfhgmpStackMemberSerial		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.2
When adding a member switch to the stack, the master switch will assign an unique integer to identify it.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..2047

hpnicfhgmpStackMemberIpAddr		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.3
The private member IP address for the communication inside the stack.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hpnicfhgmpStackMemberName		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.4
Hostname of the member switch.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfhgmpStackMemberPassword		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.5
Member password for joining a stack.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfhgmpStackMemberPlatform		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.6
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfhgmpStackMemberStatus		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.7
Member status on the master switch, use for displaying the network management status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(0), fault(1)

hpnicfhgmpStackMemberDisconCount		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.8
Count of inside communication disconnection between the member switch and the master switch.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfhgmpStackMemberEnrollTime		1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.9
Enrollment time of the member, measured in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfhgmpStackRole		1.3.6.1.4.1.11.2.14.11.15.8.7.2.7
This switch's role status in stack.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	roleCMDSW(1), roleMEMBERSW(2), roleBAKSW(3), roleCASW(16), roleUNISW(17)

hpnicfhgmpStackMaxPoolNum		1.3.6.1.4.1.11.2.14.11.15.8.7.2.8
Max switch members in one stack that the switch support (include main switch).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfhgmpStackMainSwMac		1.3.6.1.4.1.11.2.14.11.15.8.7.2.9
The MAC address of main switch. It will be 00.00.00 when not be a member of stack.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..6)

hpnicfNDPObject		1.3.6.1.4.1.11.2.14.11.15.8.7.5
This MIB contains objects to manage the ndp operations, which are used on lanswitch products.
Status: current	Access: read-only
OBJECT-IDENTITY

hpnicfNDPStatus		1.3.6.1.4.1.11.2.14.11.15.8.7.5.1
NDP protocol module enable flag
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

hpnicfNDPHelloTimer		1.3.6.1.4.1.11.2.14.11.15.8.7.5.2
NDP packet transmission interval, measured in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..254

hpnicfNDPAgingTime		1.3.6.1.4.1.11.2.14.11.15.8.7.5.3
How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..255

hpnicfNDPChange		1.3.6.1.4.1.11.2.14.11.15.8.7.5.4
Change identifier of the Neighbor table
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfNDPPortTable		1.3.6.1.4.1.11.2.14.11.15.8.7.5.5
Configure to enable/disable the interface NDP of the switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfNDPPortEntry

hpnicfNDPPortEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfNDPPortEntry

hpnicfNDPIfIndex		1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.1
Unique identifier of an interface of the device.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfNDPPortStatus		1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.2
If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

hpnicfNDPPortNbTable		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6
NDP neighbor information on the switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfNDPPortNbEntry

hpnicfNDPPortNbEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfNDPPortNbEntry

hpnicfNDPPortNbDeviceId		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.1
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..10)

hpnicfNDPPortNbPortName		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.2
Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hpnicfNDPPortNbDeviceName		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.3
Device name. A null string indicates that the field was not included in the latest NDP packet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfNDPPortNbPortMode		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.4
The neighbor port duplex mode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	full(1), half(2), auto(3)

hpnicfNDPPortNbProductVer		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.5
Product version. A null string indicates that the field was not included in the latest NDP packet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfNDPPortNbHardVer		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.6
Hardware version. A null string indicates that the field was not included in the latest NDP packet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfNDPPortNbBootromVer		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.7
Bootrom version. A null string indicates that the field was not included in the latest NDP packet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfNDPPortNbSoftVer		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.8
Software version. A null string indicates that the field was not included in the latest NDP packet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfNDPPortNbAgingtime		1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.9
How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	5..255

hpnicfNTDPObject		1.3.6.1.4.1.11.2.14.11.15.8.7.4
This MIB contains objects to manage the ntdp operations, which are used on lanswitch products.
Status: current	Access: read-only
OBJECT-IDENTITY

hpnicfhgmpNTDPCollectTopTime		1.3.6.1.4.1.11.2.14.11.15.8.7.4.1
Topology collection interval of the administrator switch of the cluster, measured in minutes.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

hpnicfhgmpNTDPHopRange		1.3.6.1.4.1.11.2.14.11.15.8.7.4.2
Range of the topology collection of the administrator switch
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..16

hpnicfhgmpNTDPRun		1.3.6.1.4.1.11.2.14.11.15.8.7.4.3
Enable/Disable the NTDP function on the switch.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	false(0), true(1)

hpnicfhgmpNTDPPortDelay		1.3.6.1.4.1.11.2.14.11.15.8.7.4.4
Set the delay to forward the topology request via the ports, measured in milliseconds.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..100

hpnicfhgmpNTDPHopDelay		1.3.6.1.4.1.11.2.14.11.15.8.7.4.5
Set the delay to forward the topology request from every hop, measured in milliseconds.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..1000

hpnicfhgmpNTDPLastTopCollectDuration		1.3.6.1.4.1.11.2.14.11.15.8.7.4.6
Duration of the latest overall topology collection, a performance count measured in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfhgmpNTDPCacheChange		1.3.6.1.4.1.11.2.14.11.15.8.7.4.7
Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hpnicfhgmpNTDPTOPTableChange		1.3.6.1.4.1.11.2.14.11.15.8.7.4.8
Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hpnicfhgmpNTDPInterfaceTable		1.3.6.1.4.1.11.2.14.11.15.8.7.4.9
Enable/Disable the NTDP on the switch port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpNTDPInterfaceEntry

hpnicfhgmpNTDPInterfaceEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpNTDPInterfaceEntry

hpnicfhgmpNTDPInterfaceIfIndex		1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.1
Unique identifier an interface of the device.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfhgmpNTDPInterfaceEnable		1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.2
If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	false(0), true(1)

hpnicfhgmpNTDPCacheTable		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10
Access the information about the switch from the topology table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpNTDPCacheEntry

hpnicfhgmpNTDPCacheEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpNTDPCacheEntry

hpnicfhgmpNTDPCacheHashIndex		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.1
Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

hpnicfhgmpNTDPCacheDeviceID		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.2
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..10)

hpnicfhgmpNTDPCacheClusterName		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.3
Name of the cluster including the device.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfhgmpNTDPCacheClusterRole		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.4
Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	roleCOSW(1), roleMSW(2), roleBKSW(3), roleCASW(16), roleUNISW(17)

hpnicfhgmpNTDPCacheCapabilities		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.5
The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfhgmpNTDPCacheVersion		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.6
The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfhgmpNTDPCachePlatform		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.7
Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hpnicfhgmpNTDPCacheMngVLAN		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.8
The management VLAN ID of the device.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfhgmpNTDPCacheHop		1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.9
Hops to this switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hpnicfhgmpNTDPTopTable		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11
Access the topology structure collected by the NTDP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfHgmpNTDPTopEntry

hpnicfhgmpNTDPTopEntry		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfHgmpNTDPTopEntry

hpnicfhgmpNTDPTopHashIndex		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.1
Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

hpnicfhgmpNTDPTopEdgeStartDevID		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.2
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..10)

hpnicfhgmpNTDPTopEdgeIndex		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.3
Edge index of this entry in the data structure.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hpnicfhgmpNTDPTopEdgeEndDevID		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.4
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..10)

hpnicfhgmpNTDPTopEdgeStartPort		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.5
The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hpnicfhgmpNTDPTopEdgeStartPortFullDuplex		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.6
The full-duplex status of the first port on a topology edge.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	half(0), full(1)

hpnicfhgmpNTDPTopEdgeStartPortSpeed		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.7
The speed of the first port on a topology edge.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hpnicfhgmpNTDPTopEdgeEndPort		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.8
The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..47)

hpnicfhgmpNTDPTopLinkStatus		1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.11
In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	forwarding(1), blocking(2)

hpnicfhgmpStackEventsV2		1.3.6.1.4.1.11.2.14.11.15.8.7.2.0
Definition point for Stack notifications.
Status: current	Access: read-only
OBJECT-IDENTITY

hpnicfhgmpStackMemberfailure		1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.1
When a stack member failure, send a snmp trap to the network management.
Status: current	Access: read-only
NOTIFICATION-TYPE

hpnicfhgmpStackMemberRecover		1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.2
When a stack member Recover, send a snmp trap to the network management.
Status: current	Access: read-only
NOTIFICATION-TYPE

hpnicfhgmpStackMemberStatusChange		1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.3
When a stack member status change, send a snmp trap to the network management.
Status: current	Access: read-only
NOTIFICATION-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor