HPN-ICF-E1T1VI-MIB

File: HPN-ICF-E1T1VI-MIB.mib (3804 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB HPN-ICF-OID-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
NOTIFICATION-TYPE ifIndex ifDescr
hpnicfCommon

Defined Types

HpnicfE1T1VIEntry  
SEQUENCE    
  hpnicfE1T1VIUsingTimeslots Integer32
  hpnicfE1T1VIUsingTimeslotsRatio Integer32

Defined Values

hpnicfE1T1VI 1.3.6.1.4.1.11.2.14.11.15.2.76
This MIB provides E1/T1 voice interface information that are excluded by RFC 1213 and RFC 2233
MODULE-IDENTITY    

hpnicfE1T1VITable 1.3.6.1.4.1.11.2.14.11.15.2.76.1
This table contains E1/T1 voice interface information, such as the total number of using time slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfE1T1VIEntry

hpnicfE1T1VIEntry 1.3.6.1.4.1.11.2.14.11.15.2.76.1.1
This entry contains E1/T1 voice interface information. The index of this Entry is ifIndex defined in ifTable of RFC1213-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpnicfE1T1VIEntry  

hpnicfE1T1VIUsingTimeslots 1.3.6.1.4.1.11.2.14.11.15.2.76.1.1.1
The total number of using time slots on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfE1T1VIUsingTimeslotsRatio 1.3.6.1.4.1.11.2.14.11.15.2.76.1.1.2
The total ratio of using time slots on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpnicfE1T1VINotifications 1.3.6.1.4.1.11.2.14.11.15.2.76.2
OBJECT IDENTIFIER    

hpnicfE1T1VITrapPrefix 1.3.6.1.4.1.11.2.14.11.15.2.76.2.0
OBJECT IDENTIFIER    

hpnicfE1T1VITrapTimeSlot 1.3.6.1.4.1.11.2.14.11.15.2.76.2.0.1
This trap is sent to the manager under the following condidion: All the available time slots of a E1/T1 voice interface has been in use.
Status: current Access: read-only
NOTIFICATION-TYPE    

hpnicfE1T1VIGeneral 1.3.6.1.4.1.11.2.14.11.15.2.76.3
OBJECT IDENTIFIER    

hpnicfE1T1VITrapTimeSlotEnable 1.3.6.1.4.1.11.2.14.11.15.2.76.3.1
This attribute controls whether the hpnicfE1T1VITrapTimeSlot trap will be sent or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)