HP-ICF-TC

File: HP-ICF-TC.mib (6415 bytes)

Imported modules

SNMPv2-SMI

SNMPv2-TC

HP-ICF-OID

Imported symbols

MODULE-IDENTITY

TEXTUAL-CONVENTION

hpicfAdmin

Defined Types

ConfigStatus
Used to indicate the configuration status for a group of objects. 'active' means that the values of the related objects are currently in use by the device. 'notInService' indicates that the objects have been reconfigured in such a way that the values cannot take effect until after the next reboot of the device. 'notReady' indicates that the objects are not consistent with each other.
TEXTUAL-CONVENTION
	INTEGER	active(1), notInService(2), notReady(3)

HpSwitchPortType
Used to indicate the type of port.
TEXTUAL-CONVENTION
	INTEGER	other(1), none(2), unknown(3), ethernetCsmacd(6), iso88023Csmacd(7), fddi(15), atm(37), propMultiplexor(54), ieee80212(55), fastEther(62), fastEtherFX(69), fastEtherFX-sfp(70), tenGSFP-SR(112), tenGSFP-LR(113), tenGSFP-ER(114), tenGSFP-LRM(115), tenGSFP-LX4(116), gigabitEthernetSX(117), gigabitEthernetLX(118), gigabitEthernetT(119), gigabitEthernetStk(120), gigabitEthernetLH(121), tenGbE-CX4(122), gigabitEthernetESP(123), tenGbE-SR(124), tenGbE-ER(125), tenGbE-LR(126), gigabitEthernetT-sfp(127), fastEtherGEN(128), gigabitEthernetGEN(129), tenGbE-GEN(130), fastEtherBX-D(131), fastEtherBX-U(132), gigabitEthernetBX-D(133), gigabitEthernetBX-U(134), tenGbE-LRM(135), sFP-PLUS-SR(136), sFP-PLUS-LR(137), sFP-PLUS-LRM(138), sFP-PLUS-DAC(139), sFP-PLUS-DA1(140), sFP-PLUS-DA2(141), sFP-PLUS-DA3(142), sFP-PLUS-DA5(143), sFP-PLUS-DA7(144), sFP-PLUS-DA10(145), sFP-PLUS-DA15(146), sFP-PLUS-DA20(147), tenGbE-T(148), tenGbE-TSH(149), tenGbE-TLH(150), tenGbE-STK(151), xFP-SFP-PLUS-DAC(152), xFP-SFP-PLUS-DA1(153), xFP-SFP-PLUS-DA3(154), xFP-SFP-PLUS-DA5(155), xFP-SFP-PLUS-DA7(156), xFP-SFP-PLUS-DA10(157), tenGbE-K(158), sFP-PLUS-ER(160), sFP-CWDM1470(161), sFP-CWDM1490(162), sFP-CWDM1510(163), sFP-CWDM1530(164), sFP-CWDM1550(165), sFP-CWDM1570(166), sFP-CWDM1590(167), sFP-CWDM1610(168)

VidList
Each octet within this value specifies a set of eight VlanIndex (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VID, and the least significant bit represents the highest numbered VID. Thus, each VID is represented by a single bit within the value of this object. If that bit has a value of 1 then that VID is included in the set of VIDs; the VID is not included if its bit has a value of 0. This list represents the entire range of VlanIndex values defined in the scope of IEEE 802.1Q.
TEXTUAL-CONVENTION
	OCTET STRING	Size(512)

Defined Values

hpicfTextualConventions		1.3.6.1.4.1.11.2.14.10.4
This module contains common textual convention definitions used by various HP ICF MIB modules.
MODULE-IDENTITY

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor