HP-ICF-OSPFV3-MIB

File: HP-ICF-OSPFV3-MIB.mib (80429 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
INET-ADDRESS-MIB HP-ICF-OID HP-ICF-OSPF
OSPF-MIB OSPFV3-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Counter32 Integer32 Unsigned32
TruthValue MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP InetAddressIPv6 hpSwitch
HpicfOspfLogType HpicfOspfLogAction Metric
BigMetric ospfv3AsLsdbEntry ospfv3LinkLsdbEntry
ospfv3AreaLsdbEntry ospfv3IfEntry ospfv3NbrEntry
ospfv3IfIndex ospfv3IfInstId ospfv3AreaLsdbAreaId
ospfv3AreaLsdbType ospfv3AreaLsdbLsid ospfv3AreaLsdbRouterId
ospfv3LinkLsdbIfIndex ospfv3LinkLsdbIfInstId ospfv3LinkLsdbType
ospfv3LinkLsdbRouterId ospfv3LinkLsdbLsid ospfv3RouterId
ospfv3IfState ospfv3PacketType ospfv3VirtIfInstId
ospfv3VirtIfNeighbor ospfv3VirtIfAreaId ospfv3NbrRtrId
ospfv3VirtIfState ospfv3NbrIfIndex ospfv3NbrIfInstId
ospfv3NbrState ospfv3VirtNbrArea ospfv3VirtNbrIfInstId
ospfv3VirtNbrRtrId ospfv3VirtNbrState ospfv3PacketSrc
ospfv3ConfigErrorType Ospfv3RouterIdTC Ospfv3AreaIdTC
Ospfv3LsIdTC

Defined Types

HpicfOspfv3AsLsdbEntry  
SEQUENCE    
  hpicfOspfv3AsLsdbEFTFlags BITS
  hpicfOspfv3AsLsdbMetric Metric
  hpicfOspfv3AsLsdbPrefixLength Unsigned32
  hpicfOspfv3AsLsdbPrefixOptions Unsigned32
  hpicfOspfv3AsLsdbRefLsType Unsigned32
  hpicfOspfv3AsLsdbAddrPrefix InetAddressIPv6
  hpicfOspfv3AsLsdbFwdingAddress InetAddressIPv6
  hpicfOspfv3AsLsdbExtRouteTags Unsigned32
  hpicfOspfv3AsLsdbRefLsId Unsigned32

HpicfOspfv3AreaLsdbEntry  
SEQUENCE    
  hpicfOspfv3AreaLsdbRtrCapBits BITS
  hpicfOspfv3AreaLsdbOptions Unsigned32
  hpicfOspfv3AreaLsdbMetric Metric
  hpicfOspfv3AreaLsdbPrefixLength Unsigned32
  hpicfOspfv3AreaLsdbPrefixOptions Unsigned32
  hpicfOspfv3AreaLsdbAddrPrefix InetAddressIPv6
  hpicfOspfv3AreaLsdbDstRtrId Ospfv3RouterIdTC
  hpicfOspfv3AreaLsdbNumPrefixes Unsigned32
  hpicfOspfv3AreaLsdbRefLsType Unsigned32
  hpicfOspfv3AreaLsdbRefLsId Unsigned32
  hpicfOspfv3AreaLsdbRefAdvRtrId Ospfv3RouterIdTC
  hpicfOspfv3AreaLsdbEFTFlags BITS
  hpicfOspfv3AreaLsdbFwdingAddress InetAddressIPv6
  hpicfOspfv3AreaLsdbExtRouteTags Unsigned32

HpicfOspfv3LinkLsdbEntry  
SEQUENCE    
  hpicfOspfv3LinkLsdbRtrPriority Unsigned32
  hpicfOspfv3LinkLsdbOptions Unsigned32
  hpicfOspfv3LinkLsdbLocalAddress InetAddressIPv6
  hpicfOspfv3LinkLsdbNumPrefixes Unsigned32

HpicfOspfv3IfEntry  
SEQUENCE    
  hpicfOspfv3IfPassive TruthValue
  hpicfOspfv3IfNbrCount Unsigned32

HpicfOspfv3NbrEntry  
SEQUENCE    
  hpicfOspfv3NbrUpTime Unsigned32
  hpicfOspfv3NbrTimeToExpiry Unsigned32

HpicfOspfv3IfStatsEntry  
SEQUENCE    
  hpicfOspfv3IfSentHelloPkt Counter32
  hpicfOspfv3IfSentDDPkt Counter32
  hpicfOspfv3IfSentLSRPkt Counter32
  hpicfOspfv3IfSentLSUPkt Counter32
  hpicfOspfv3IfSentLSAPkt Counter32
  hpicfOspfv3IfRcvdHelloPkt Counter32
  hpicfOspfv3IfRcvdDDPkt Counter32
  hpicfOspfv3IfRcvdLSRPkt Counter32
  hpicfOspfv3IfRcvdLSUPkt Counter32
  hpicfOspfv3IfRcvdLSAPkt Counter32

HpicfOspfv3IfErrorEntry  
SEQUENCE    
  hpicfOspfv3IfErrorType Integer32
  hpicfOspfv3IfErrorCount Counter32

HpicfOspfv3IfClearStatsEntry  
SEQUENCE    
  hpicfOspfv3ClearCounters TruthValue

HpicfOspfv3SpfEntry  
SEQUENCE    
  hpicfOspfv3SpfIndex Unsigned32
  hpicfOspfv3SpfReason Unsigned32

HpicfOspfv3LogEntry  
SEQUENCE    
  hpicfOspfv3LogType HpicfOspfLogType
  hpicfOspfv3LogAction HpicfOspfLogAction

HpicfOspfv3RouterLSAEntry  
SEQUENCE    
  hpicfOspfv3RouterLSANbrIfId Unsigned32
  hpicfOspfv3RouterLSANbrRtrId Ospfv3RouterIdTC
  hpicfOspfv3RouterLSAIfType Unsigned32
  hpicfOspfv3RouterLSAMetric Unsigned32
  hpicfOspfv3RouterLSAIfId Unsigned32

HpicfOspfv3NetworkLSAEntry  
SEQUENCE    
  hpicfOspfv3NetworkLSASeqNum Unsigned32
  hpicfOspfv3NetworkLSAAttachedRouter Ospfv3RouterIdTC

HpicfOspfv3IntraAPLSAEntry  
SEQUENCE    
  hpicfOspfv3IntraAPAddrPrefix InetAddressIPv6
  hpicfOspfv3IntraAPPrefixLength Unsigned32
  hpicfOspfv3IntraAPPrefixOptions Unsigned32
  hpicfOspfv3IntraAPMetric Metric

HpicfOspfv3LinkLSAEntry  
SEQUENCE    
  hpicfOspfv3LinkAddrPrefix InetAddressIPv6
  hpicfOspfv3LinkPrefixLength Unsigned32
  hpicfOspfv3LinkPrefixOptions Unsigned32

Defined Values

hpicfOspfv3MIB 1.3.6.1.4.1.11.2.14.11.5.1.44
The MIB module contains HP proprietary extensions to the OSPFV3-MIB module.
MODULE-IDENTITY    

hpicfOspfv3Objects 1.3.6.1.4.1.11.2.14.11.5.1.44.1
OBJECT IDENTIFIER    

hpicfOspfv3Conformance 1.3.6.1.4.1.11.2.14.11.5.1.44.2
OBJECT IDENTIFIER    

hpicfOspfv3GeneralGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1
OBJECT IDENTIFIER    

hpicfOspfv3DefaultImportMetric 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.1
The default metric used for advertising external routes imported into OSPF by this router.
Status: current Access: read-write
OBJECT-TYPE    
  BigMetric  

hpicfOspfv3DefaultImportMetricType 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.2
The default metric type used for advertising external routes imported into OSPF by this router.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER externalType1(1), externalType2(2)  

hpicfOspfv3IntraAreaDistance 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.3
The default administrative distance to associate with intra-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area or AS-external routes even if hpicfOspfv3InterAreaDistance or hpicfOspfv3ExternalDistance is lower than hpicfOspfv3IntraAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

hpicfOspfv3InterAreaDistance 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.4
The default administrative distance to associate with inter-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area routes, even if hpicfOspfv3InterAreaDistance is lower than hpicfOspfv3IntraAreaDistance. It will also still prefer inter-area routes over AS-external routes even if hpicfOspfv3ExternalDistance is lower than hpicfOspfv3InterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

hpicfOspfv3ExternalDistance 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.5
The default administrative distance to associate with AS-external routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes and inter-area routes over AS-external routes even if hpicfOspfv3ExternalDistance is lower than the hpicfOspfv3IntraAreaDistance or hpicfOspfv3InterAreaDistance. The appropriate administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

hpicfOspfv3AsLsdbTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2
The OSPFv3 Process's AS-Scope Link State Database (LSDB). The LSDB contains the AS-Scope Link State Advertisements from throughout the areas that the device is attached to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3AsLsdbEntry

hpicfOspfv3AsLsdbEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1
A single AS-Scope Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3AsLsdbEntry  

hpicfOspfv3AsLsdbEFTFlags 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.1
A 32-bit integer Representing the E,F and T bit flags
Status: current Access: read-only
OBJECT-TYPE    
  BITS bitE(0), bitF(1), bitT(2)  

hpicfOspfv3AsLsdbMetric 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.2
The cost associated with this route.
Status: current Access: read-only
OBJECT-TYPE    
  Metric  

hpicfOspfv3AsLsdbPrefixLength 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.3
The Prefix Length of the Address Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AsLsdbPrefixOptions 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.4
The Prefix Options associated with the Address Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AsLsdbRefLsType 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.5
If non-zero value this refers to another LSA in Link State Database further identified by the Reference Link State ID field
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AsLsdbAddrPrefix 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.6
The advertised 16-byte Address Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

hpicfOspfv3AsLsdbFwdingAddress 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.7
If included, Data traffic for the advertised destination will be forwarded to this address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

hpicfOspfv3AsLsdbExtRouteTags 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.8
The 32-bit Router Tags for the advertised Route.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AsLsdbRefLsId 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.9
The 32-bit LSID of the referenced LSA entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AreaLsdbTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3
The OSPFv3 Process's Area-Scope LSDB. The LSDB contains the Area-Scope Link State Advertisements from throughout the area that the device is attached to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3AreaLsdbEntry

hpicfOspfv3AreaLsdbEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1
A single Area-Scope Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3AreaLsdbEntry  

hpicfOspfv3AreaLsdbRtrCapBits 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.1
This field is valid if the LSA is a Router LSA. It uniquely identifies the router type of the router in the Area.
Status: current Access: read-only
OBJECT-TYPE    
  BITS bitB(0), bitE(1), bitV(2), bitW(3), bitNt(4)  

hpicfOspfv3AreaLsdbOptions 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.2
The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. This field is valid if the LSA is a Router LSA or a Network LSA, or an Inter-Area-Router LSA.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AreaLsdbMetric 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.3
This field is valid if the LSA is a Router LSA, a Inter-Area_prefix LSA or a NSSA LSA. This field indicates the cost involved in using the interface or route.
Status: current Access: read-only
OBJECT-TYPE    
  Metric  

hpicfOspfv3AreaLsdbPrefixLength 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.4
The Prefix Length of the Address Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AreaLsdbPrefixOptions 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.5
The Prefix Options associated with the Address Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AreaLsdbAddrPrefix 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.6
The advertised 16-byte Address Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

hpicfOspfv3AreaLsdbDstRtrId 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.7
The Router ID of the router being described by the LSA. This field is valid if the LSA is a Inter-Area-Router LSA.
Status: current Access: read-only
OBJECT-TYPE    
  Ospfv3RouterIdTC  

hpicfOspfv3AreaLsdbNumPrefixes 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.8
This field is valid if the LSA is a Inter-Area-Prefix LSAs and indicates the number of prefixes in the LSA.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AreaLsdbRefLsType 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.9
This field is valid if the LSA is a Inter-Area-Prefix LSA or a NSSA LSA. If non-zero, an LSA with this LS type is to be associated with this LSA.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AreaLsdbRefLsId 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.10
This field is valid if the LSA is a Inter-Area-Prefix LSA or a NSSA LSA. This field is included only if the Reference LS Type field is set and indentifies the LSA with this Link State ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3AreaLsdbRefAdvRtrId 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.11
This field is valid if the LSA is a Inter-Area-Prefix LSA or a NSSA LSA. This field is included only if the Reference LS Type field is set and indentifies the LSA having this Router ID as the advertising Router ID.
Status: current Access: read-only
OBJECT-TYPE    
  Ospfv3RouterIdTC  

hpicfOspfv3AreaLsdbEFTFlags 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.12
This field is valid if the LSA is a NSSA LSA. This field represents the E,F and T bit flags
Status: current Access: read-only
OBJECT-TYPE    
  BITS bitE(0), bitF(1), bitT(2)  

hpicfOspfv3AreaLsdbFwdingAddress 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.13
This field is valid if the LSA is a NSSA LSA. This field is present only if the 'F' Bit is set in the EFT flags field and if included, the data traffic for the advertised destination will be forwarded to this address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

hpicfOspfv3AreaLsdbExtRouteTags 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.14
This field is valid if the LSA is a NSSA LSA. This field is present only if the 'T' Bit is set in the EFT flags field. A 32-bit field which may be used to communicate additional information between AS boundary routers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3LinkLsdbTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4
The OSPFv3 Process's Link-Scope LSDB for non-virtual interfaces. The LSDB contains the Link-Scope Link State Advertisements from the interfaces that the device is attached to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3LinkLsdbEntry

hpicfOspfv3LinkLsdbEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1
A single Link-Scope Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3LinkLsdbEntry  

hpicfOspfv3LinkLsdbRtrPriority 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.1
This field is the OSPF priority set for this router
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3LinkLsdbOptions 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.2
The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3LinkLsdbLocalAddress 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.3
The advertising router's local link IPv6 address
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv6  

hpicfOspfv3LinkLsdbNumPrefixes 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.4
The number of other links on the advertising router
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3IfTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5
The OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3IfEntry

hpicfOspfv3IfEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1
The OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3. The information in this table is persistent and when written the entity SHOULD save the change to non-volatile storage.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3IfEntry  

hpicfOspfv3IfPassive 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.1
The passive state configuration of the OSPF interface. In the passive mode no OSPF protocol messages are exchanged on this interface. true (1) - The interface is configured to work in Passive mode false (2) - The interface is configured to work in normal mode. This is the default configuration. Changing the value will cause OSPF to reset on this interface and make necessary adjustments to the link state database. All other operations are not defined and will not affect the state of the protocol.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpicfOspfv3IfNbrCount 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.2
This object specifies the number of OSPFv3 neighbors present in this interface. This counter should be incremented when a new neighbor is added in the network in which this interface is present. It should be decremented when a neighbor is disconnected.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3NbrTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6
A table describing all neighbors in the locality of the OSPFv3 router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3NbrEntry

hpicfOspfv3NbrEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1
The information regarding a single neighbor.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3NbrEntry  

hpicfOspfv3NbrUpTime 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.1
This object specifies the time duration in seconds for which the adjacency with a particular neighbor is active. This should be a monotonically increasing timer for the duration till the adjacency is active. This counter should be reset at losing and re-establishing an adjacency
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3NbrTimeToExpiry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.2
This object specifies the time remaining for the dead timer for the particular neighbor to expire. This counter thus specifies the time in seconds left for an adjacency to be brought down in case no Hello packet is received during that interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3IfStatsTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7
Table that contains OSPFv3 Interface traffic specific information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3IfStatsEntry

hpicfOspfv3IfStatsEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1
A list of statistics counters maintained for an OSPFv3 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3IfStatsEntry  

hpicfOspfv3IfSentHelloPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.1
The number of OSPFv3 Hello packets sent on the interface. This number is incremented each time an OSPFv3 Hello packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfSentDDPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.2
The number of Database Description packets sent on the interface. This number is incremented each time an OSPFv3 DD packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfSentLSRPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.3
The number of Link State Request packets sent on the interface. This number is incremented each time OSPFv3 LSR packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfSentLSUPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.4
The number of Link State Update packets sent on the interface. This number is incremented each time OSPFv3 LSU packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfSentLSAPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.5
The number of Link State Acknowledgement packet sent on the interface. This number is incremented each time OSPFv3 LSA packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfRcvdHelloPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.6
The number of Hello packets received on the interface. This number is incremented each time a hello packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfRcvdDDPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.7
The number of Database Description packets received on the interface. This number is incremented each time a OSPFv3 DD packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfRcvdLSRPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.8
The number of Link State Request packets received on the interface. This number is incremented each time a OSPFv3 LSR packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfRcvdLSUPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.9
The number of Link State Update packets received on the interface. This number is incremented each time an OSPFv3 LSU packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfRcvdLSAPkt 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.10
The number of Link State Acknowledgement packets received on the interface. This number is incremented each time a OSPF LSA packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfErrorTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.8
Table that contains OSPFv3 Interface traffic specific error information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3IfErrorEntry

hpicfOspfv3IfErrorEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1
A list of error counters maintained for an OSPFv3 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3IfErrorEntry  

hpicfOspfv3IfErrorType 1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.1
This refers to the type of errors in the OSPFv3 packet received on an OSPFv3 enabled interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..FFFF  

hpicfOspfv3IfErrorCount 1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.2
This refers to the number of erroneous packets received on an OSPFv3 interface for each error type. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfOspfv3IfClearStatsTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.9
A list used to clear statistics information maintained for an OSPFv3 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3IfClearStatsEntry

hpicfOspfv3IfClearStatsEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1
A list used to clear statistics information maintained for an OSPFv3 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3IfClearStatsEntry  

hpicfOspfv3ClearCounters 1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1.1
When this variable is set to true for a given vlan interface, correspondiing interface counters will be cleared. Read of this will always be false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpicfOspfv3SpfTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.10
Table that contains OSPFv3 SPF execution details.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3SpfEntry

hpicfOspfv3SpfEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1
A list of OSPFv3 SPF algorithm execution details.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3SpfEntry  

hpicfOspfv3SpfIndex 1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.1
The index in spf table. This can range from 1 to 100 as only last hundred SPF run's reasons will be saved.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3SpfReason 1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.2
The hpicfOspfv3SpfReason refers to the reasons for scheduling an SPF run. The Reasons could be OSPFv3 initialization, adding/deleting interface or link state update received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3LogTable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.11
A table containing the configuration parameters for OSPFv3 event logging.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3LogEntry

hpicfOspfv3LogEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1
The configuration parameters for OSPFv3 event log entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3LogEntry  

hpicfOspfv3LogType 1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.1
The type of the event log in OSPFv3 routing protocol .
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfLogType  

hpicfOspfv3LogAction 1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.2
The mode of OSPFv3 event logging. If the OSPFv3 log type is set to neighborAdjacencyChanges, then meaninng of this field is as follows: if enabled, it logs only the adjacency state transitions to final states. if enabledWithDetail option, it logs all the state transitions and other events and error conditions related to adjacency. if disabled, none of the adjacency related events are logged.
Status: current Access: read-write
OBJECT-TYPE    
  HpicfOspfLogAction  

hpicfOspfv3RouterLSATable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12
This table having Area scope is a dependent-expansion table for the Router LSA entry in the Area LSDB table. It represents the list of per interface details advertised in a Router LSA.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3RouterLSAEntry

hpicfOspfv3RouterLSAEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1
A single Area-Scope Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3RouterLSAEntry  

hpicfOspfv3RouterLSANbrIfId 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.1
The Interface Id of the neighbor's router that originating router in the Autonomous System.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3RouterLSANbrRtrId 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.2
The router id of the router which is connected over the interface Id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ospfv3RouterIdTC  

hpicfOspfv3RouterLSAIfType 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.3
The 32-bit identifier of the Area from which the LSA was received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3RouterLSAMetric 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.4
The interface Id of the router that connectes to the other router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

hpicfOspfv3RouterLSAIfId 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.5
The interface Id of the router that connectes to the other router.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

hpicfOspfv3NetworkLSATable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.13
This table having Area scope is a dependent-expansion table for the Network LSA entry in the Area LSDB table. This table represents the list of routers advertised in a Network LSA.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3NetworkLSAEntry

hpicfOspfv3NetworkLSAEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1
A single Area-Scope Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3NetworkLSAEntry  

hpicfOspfv3NetworkLSASeqNum 1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.1
The 32-bit sequence number identifying the attached router-ids.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3NetworkLSAAttachedRouter 1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.2
The 32-bit Router identifier of the attached Router.
Status: current Access: read-only
OBJECT-TYPE    
  Ospfv3RouterIdTC  

hpicfOspfv3IntraAPLSATable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14
This table having Area scope is a dependent-expansion table for the Intra-Area-Prefix LSA entry in the Area LSDB table. This table represents the list of Address Prefixes advertised in a Intra-Area-Prefix LSA by the Designated Router in that Area.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3IntraAPLSAEntry

hpicfOspfv3IntraAPLSAEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1
A single Area-Scope Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3IntraAPLSAEntry  

hpicfOspfv3IntraAPAddrPrefix 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.1
The advertised 16-byte Address Prefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressIPv6  

hpicfOspfv3IntraAPPrefixLength 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.2
The Prefix Length of the Address Prefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3IntraAPPrefixOptions 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.3
The Prefix Options associated with the Address Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3IntraAPMetric 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.4
The Cost associated with the Address Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  Metric  

hpicfOspfv3LinkLSATable 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15
The OSPFv3 Link LSA having Link scope. The Link expanstion table contains the local address prefix fields of all the links on the originating router
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfOspfv3LinkLSAEntry

hpicfOspfv3LinkLSAEntry 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1
A single Link-Scope Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfOspfv3LinkLSAEntry  

hpicfOspfv3LinkAddrPrefix 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.1
The Address prefix of all the links that has OSPFv3 configured in the originating router.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressIPv6  

hpicfOspfv3LinkPrefixLength 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.2
The Prefix Length of the Address Prefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hpicfOspfv3LinkPrefixOptions 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.3
The Prefix Options associated with the Address Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

hpicfOspfv3Trap 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16
OBJECT IDENTIFIER    

hpicfOspfv3Traps 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0
OBJECT IDENTIFIER    

hpicfOspfv3TrapControl 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1
OBJECT IDENTIFIER    

hpicfOspfv3SetTrap 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.1
A four-octet string serving as a bit map for the trap events defined by the OSPFv3 traps. This object is used to enable and disable specific OSPFv3 traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

hpicfOspfv3LsdbAreaId 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.2
The 32-bit identifier of the Area from which the LSA was received.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Ospfv3AreaIdTC  

hpicfOspfv3LsdbType 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.3
The type of the link state advertisement. Each link state type has a separate advertisement format. Area-Scope LSAs unrecognized by the router are also stored in this database.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

hpicfOspfv3LsdbRouterId 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.4
The 32-bit number that uniquely identifies the originating router in the Autonomous System.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Ospfv3RouterIdTC  

hpicfOspfv3LsdbLsid 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.5
The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Ospfv3LsIdTC  

hpicfOspfv3IfStateChange 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.1
An hpicfOspfv3IfStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3VirtIfStateChange 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.2
An hpicfOspfv3VirtIfStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual interface. This notification should be generated when the inter-face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3NbrStateChange 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.3
An hpicfOspfv3NbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPFv3 neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by hpicfOspfv3IfStateChange.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3VirtNbrStateChange 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.4
An hpicfOspfv3VirtNbrStateChange trap signifies that there has been a change in the state of an OSPFv3 virtual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3IfConfigError 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.5
An hpicfOspfv3IfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3VirtIfConfigError 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.6
An hpicfOspfv3VirtIfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3IfRxBadPacket 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.7
An hpicfOspfv3IfRxBadPacket trap signifies that an OSPFv3 packet that cannot be parsed has been received on a non-virtual interface.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3VirtIfRxBadPacket 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.8
An hpicfOspfv3VirtIfRxBadPacket trap signifies that an OSPFv3 packet that cannot be parsed has been received on a non-virtual interface.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3TxRetransmit 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.9
An hpicfOspfv3TxRetransmit trap signifies that an OSPFv3 packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3VirtIfTxRetransmit 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.10
An hpicfOspfv3VirtIfTxRetransmit trap signifies that an OSPFv3 packet has been retransmitted on a virtual interface. All packets that may be retransmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3OriginateLsa 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.11
An hpicfOspfv3OriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happesn every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change. Addi- tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3MaxAgeLsa 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.12
An hpicfOspfv3MaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3UnknownLsa 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.13
An hpicfOspfv3UnknownLsa trap signifies that one of the neighbor has sent an unknown LSA. Only DR generates this trap and If NBR state is less than Exchange need not originate this trap
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3AsbrStatusChange 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.16
An hpicfOspfv3AsbrStatusChange trap signifies that device's ASBR Status has changed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3AbrStatusChange 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.17
An hpicfOspfv3AbrStatusChange trap signifies that device's ABR Status has changed. There are two distinct definitions of ABR given by IBM & Cisco, Implementations are free to follow their own interpretation of ABR while originating this trap
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hpicfOspfv3Groups 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1
OBJECT IDENTIFIER    

hpicfOspfv3Compliances 1.3.6.1.4.1.11.2.14.11.5.1.44.2.2
OBJECT IDENTIFIER    

hpicfOspfv3Compliance 1.3.6.1.4.1.11.2.14.11.5.1.44.2.2.1
The compliance statement
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

hpicfOspfv3BasicGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.1
These objects are used for managing/monitoring OSPFv3 global parameters.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hpicfOspfv3AsLsdbGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.2
These objects are used for OSPFv3 systems that display their AS-scope link state database.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hpicfOspfv3AreaLsdbGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.3
These objects are used for OSPFv3 systems that display their Area-scope link state database.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hpicfOspfv3LinkLsdbGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.4
These objects are used for OSPFv3 systems that display their Link-scope link state database for non-virtual interfaces.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hpicfOspfv3IfGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.5
These interface objects used for managing/monitoring OSPFv3 interfaces.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hpicfOspfv3NbrGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.6
These neighbor objects are used for managing/monitoring OSPFv3 neighbors.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hpicfOspfv3StatisticGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.7
A collection of objects that contain OSPF interface and SPF statistics.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hpicfOspfv3LogGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.8
A collection of objects for configuring the logging of OSPFv3 adjacency related events.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hpicfOspfv3TrapControlGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.9
A collection of object which is for controlling the hpicfOspfv3Traps.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

hpicfOspfv3TrapsGroup 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.10
A collection of hpicfOspfv3 traps.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor