HP-ICF-ARP-THROTTLE

File: HP-ICF-ARP-THROTTLE.mib (8839 bytes)

Imported modules

HP-ICF-OID SNMPv2-CONF SNMPv2-SMI
SNMPv2-TC

Imported symbols

hpSwitch OBJECT-GROUP MODULE-COMPLIANCE
NOTIFICATION-GROUP Integer32 Counter32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
TruthValue MacAddress RowStatus

Defined Types

HpicfArpThrottleExcludedMacEntry  
SEQUENCE    
  hpicfArpThrottleExcludedMac MacAddress
  hpicfArpThrottleExcludedMacStatus RowStatus

Defined Values

hpicfArpThrottle 1.3.6.1.4.1.11.2.14.11.5.1.119
This MIB module contains HP proprietary objects for managing ARP throttling.
MODULE-IDENTITY    

hpicfArpThrottleNotifications 1.3.6.1.4.1.11.2.14.11.5.1.119.0
OBJECT IDENTIFIER    

hpicfArpThrottleObjects 1.3.6.1.4.1.11.2.14.11.5.1.119.1
OBJECT IDENTIFIER    

hpicfArpThrottleConformance 1.3.6.1.4.1.11.2.14.11.5.1.119.2
OBJECT IDENTIFIER    

hpicfArpThrottleExceedThresholdTrap 1.3.6.1.4.1.11.2.14.11.5.1.119.0.1
This notification indicates that a client sending large number of ARP packets over the configured threshold is detected. The MAC address of the client is included in the notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

hpicfArpThrottleClientOverThreshold 1.3.6.1.4.1.11.2.14.11.5.1.119.1.1
MAC address of a client that just went over the ARP throttle Threshold. It is used in hpicfArpThrottle notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

hpicfArpThrottleConfig 1.3.6.1.4.1.11.2.14.11.5.1.119.1.2
OBJECT IDENTIFIER    

hpicfArpThrottleEnable 1.3.6.1.4.1.11.2.14.11.5.1.119.1.2.1
The administrative status of the ARP Throttle feature. true(1) - enabled; false(2) - disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpicfArpThrottleRemediationMode 1.3.6.1.4.1.11.2.14.11.5.1.119.1.2.2
The remediation mode of the ARP Throttle. In monitor mode, the switch only logs alerts when a client exceeds the configured threshold; In filter mode, ARP packets over the threshold will be dropped in addition to alert logging.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER monitor(0), filter(1)  

hpicfArpThrottleThreshold 1.3.6.1.4.1.11.2.14.11.5.1.119.1.2.3
The maximum number of ARP packets a client can send in 5 seconds. When a client goes over the threshold, it will be put into a blacklist and subject to the configured remediation action.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1024  

hpicfArpThrottleBlacklistAgingTime 1.3.6.1.4.1.11.2.14.11.5.1.119.1.2.4
The time a client stays in the blacklist, in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..86400  

hpicfArpThrottleExcludedMacTable 1.3.6.1.4.1.11.2.14.11.5.1.119.1.2.5
List of excluded MAC addresses that are not subject to throttling.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfArpThrottleExcludedMacEntry

hpicfArpThrottleExcludedMacEntry 1.3.6.1.4.1.11.2.14.11.5.1.119.1.2.5.1
Information of an excluded MAC address that is not subject to throttling.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfArpThrottleExcludedMacEntry  

hpicfArpThrottleExcludedMac 1.3.6.1.4.1.11.2.14.11.5.1.119.1.2.5.1.1
A MAC address to be included from ARP throttle.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hpicfArpThrottleExcludedMacStatus 1.3.6.1.4.1.11.2.14.11.5.1.119.1.2.5.1.2
The row status of this entry instance. createAndGo - will create the entry for the excluded MAC and transition the status to active. active - indicate the entry instance is in effect. destroy - delete the entry instance. All other RowStatus values are NOT supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpicfArpThrottleStats 1.3.6.1.4.1.11.2.14.11.5.1.119.1.3
OBJECT IDENTIFIER    

hpicfArpThrottleStatsNumClientsInBlacklist 1.3.6.1.4.1.11.2.14.11.5.1.119.1.3.1
Total number of clients in blacklist.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfArpThrottleStatsNumClientsBeingTracked 1.3.6.1.4.1.11.2.14.11.5.1.119.1.3.2
Total number of clients being tracked for their ARP packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfArpThrottleGroups 1.3.6.1.4.1.11.2.14.11.5.1.119.2.1
OBJECT IDENTIFIER    

hpicfArpThrottleBaseGroup 1.3.6.1.4.1.11.2.14.11.5.1.119.2.1.1
A group of objects that provides ARP throttle configuration, Statistics, and traps.
Status: current Access: read-only
OBJECT-GROUP    

hpicfArpThrottleNotificationGroup 1.3.6.1.4.1.11.2.14.11.5.1.119.2.1.2
A group of notifications for ARP throttle.
Status: current Access: read-only
NOTIFICATION-GROUP    

hpicfArpThrottleCompliances 1.3.6.1.4.1.11.2.14.11.5.1.119.2.2
OBJECT IDENTIFIER    

hpicfArpThrottleCompliance 1.3.6.1.4.1.11.2.14.11.5.1.119.2.2.1
The compliance statement for HP switches that support ARP Throttle.
Status: current Access: read-only
MODULE-COMPLIANCE