HOST-RESOURCES-V2-MIB

File: HOST-RESOURCES-V2-MIB.mib (59994 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC

Imported symbols

Counter32 Gauge32 Integer32
TimeTicks mib-2 OBJECT-TYPE
MODULE-IDENTITY MODULE-COMPLIANCE OBJECT-GROUP
DisplayString

Defined Types

Boolean  
INTEGER true(1), false(2)    

KBytes  
Integer32 0..2147483647    

ProductID  
OBJECT IDENTIFIER    

DateAndTime  
OCTET STRING Size(8|11)    

InternationalDisplayString  
OCTET STRING    

HrStorageEntry  
SEQUENCE    
  hrStorageIndex Integer32
  hrStorageType OBJECT IDENTIFIER
  hrStorageDescr DisplayString
  hrStorageAllocationUnits Integer32
  hrStorageSize Integer32
  hrStorageUsed Integer32
  hrStorageAllocationFailures Counter32

HrDeviceEntry  
SEQUENCE    
  hrDeviceIndex Integer32
  hrDeviceType OBJECT IDENTIFIER
  hrDeviceDescr DisplayString
  hrDeviceID ProductID
  hrDeviceStatus INTEGER
  hrDeviceErrors Counter32

HrProcessorEntry  
SEQUENCE    
  hrProcessorFrwID ProductID
  hrProcessorLoad Integer32

HrNetworkEntry  
SEQUENCE    
  hrNetworkIfIndex Integer32

HrPrinterEntry  
SEQUENCE    
  hrPrinterStatus INTEGER
  hrPrinterDetectedErrorState BITS

HrDiskStorageEntry  
SEQUENCE    
  hrDiskStorageAccess INTEGER
  hrDiskStorageMedia INTEGER
  hrDiskStorageRemoveble Boolean
  hrDiskStorageCapacity KBytes

HrPartitionEntry  
SEQUENCE    
  hrPartitionIndex Integer32
  hrPartitionLabel InternationalDisplayString
  hrPartitionID OCTET STRING
  hrPartitionSize KBytes
  hrPartitionFSIndex Integer32

HrFSEntry  
SEQUENCE    
  hrFSIndex Integer32
  hrFSMountPoint InternationalDisplayString
  hrFSRemoteMountPoint InternationalDisplayString
  hrFSType OBJECT IDENTIFIER
  hrFSAccess INTEGER
  hrFSBootable Boolean
  hrFSStorageIndex Integer32
  hrFSLastFullBackupDate DateAndTime
  hrFSLastPartialBackupDate DateAndTime

HrSWRunEntry  
SEQUENCE    
  hrSWRunIndex Integer32
  hrSWRunName InternationalDisplayString
  hrSWRunID ProductID
  hrSWRunPath InternationalDisplayString
  hrSWRunParameters InternationalDisplayString
  hrSWRunType INTEGER
  hrSWRunStatus INTEGER

HrSWRunPerfEntry  
SEQUENCE    
  hrSWRunPerfCPU Integer32
  hrSWRunPerfMem KBytes

HrSWInstalledEntry  
SEQUENCE    
  hrSWInstalledIndex Integer32
  hrSWInstalledName InternationalDisplayString
  hrSWInstalledID ProductID
  hrSWInstalledType INTEGER
  hrSWInstalledDate DateAndTime

Defined Values

hostResourcesMibModule 1.3.6.1.2.1.25
The Host Resourcers MIB defines a uniform set of objects useful for the management of host computers. Host computers are independent of the operating system, network services, or any software application. The Host Resources MIB defines objects which are common across many computer system architectures. In addition, there are objects in MIB-II which also provide host management functionality. Implementation of the System and Interface groups is mandatory for implementors of the Host Resources MIB.
MODULE-IDENTITY    

host 1.3.6.1.2.1.25
OBJECT IDENTIFIER    

hrSystem 1.3.6.1.2.1.25.1
OBJECT IDENTIFIER    

hrStorage 1.3.6.1.2.1.25.2
OBJECT IDENTIFIER    

hrDevice 1.3.6.1.2.1.25.3
OBJECT IDENTIFIER    

hrSWRun 1.3.6.1.2.1.25.4
OBJECT IDENTIFIER    

hrSWRunPerf 1.3.6.1.2.1.25.5
OBJECT IDENTIFIER    

hrSWInstalled 1.3.6.1.2.1.25.6
OBJECT IDENTIFIER    

hrConformance 1.3.6.1.2.1.25.7
OBJECT IDENTIFIER    

hrSystemUptime 1.3.6.1.2.1.25.1.1
The amount of time since this host was last initialized. Note that this is different from sysUpTime in MIB-II [3] because sysUpTime is the uptime of the network management portion of the system.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

hrSystemDate 1.3.6.1.2.1.25.1.2
The host's notion of the local date and time of day.
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

hrSystemInitialLoadDevice 1.3.6.1.2.1.25.1.3
The index of the hrDeviceEntry for the device from which this host is configured to load its initial operating system configuration.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2147483647  

hrSystemInitialLoadParameters 1.3.6.1.2.1.25.1.4
This object contains the parameters (e.g. a pathname and parameter) supplied to the load device when requesting the initial operating system configuration from that device.
Status: current Access: read-write
OBJECT-TYPE    
  InternationalDisplayString Size(0..128)  

hrSystemNumUsers 1.3.6.1.2.1.25.1.5
The number of user sessions for which this host is storing state information. A session is a collection of processes requiring a single act of user authentication and possibly subject to collective job control.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hrSystemProcesses 1.3.6.1.2.1.25.1.6
The number of process contexts currently loaded or running on this system.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hrSystemMaxProcesses 1.3.6.1.2.1.25.1.7
The maximum number of process contexts this system can support. If there is no fixed maximum, the value should be zero. On systems that have a fixed maximum, this object can help diagnose failures that occur when this maximum is reached.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hrStorageTypes 1.3.6.1.2.1.25.2.1
OBJECT IDENTIFIER    

hrStorageOther 1.3.6.1.2.1.25.2.1.1
OBJECT IDENTIFIER    

hrStorageRam 1.3.6.1.2.1.25.2.1.2
OBJECT IDENTIFIER    

hrStorageVirtualMemory 1.3.6.1.2.1.25.2.1.3
OBJECT IDENTIFIER    

hrStorageFixedDisk 1.3.6.1.2.1.25.2.1.4
OBJECT IDENTIFIER    

hrStorageRemovableDisk 1.3.6.1.2.1.25.2.1.5
OBJECT IDENTIFIER    

hrStorageFloppyDisk 1.3.6.1.2.1.25.2.1.6
OBJECT IDENTIFIER    

hrStorageCompactDisc 1.3.6.1.2.1.25.2.1.7
OBJECT IDENTIFIER    

hrStorageRamDisk 1.3.6.1.2.1.25.2.1.8
OBJECT IDENTIFIER    

hrMemorySize 1.3.6.1.2.1.25.2.2
The amount of physical main memory contained by the host.
Status: current Access: read-only
OBJECT-TYPE    
  KBytes  

hrStorageTable 1.3.6.1.2.1.25.2.3
The (conceptual) table of logical storage areas on the host. An entry shall be placed in the storage table for each logical area of storage that is allocated and has fixed resource limits. The amount of storage represented in an entity is the amount actually usable by the requesting entity, and excludes loss due to formatting or file system reference information. These entries are associated with logical storage areas, as might be seen by an application, rather than physical storage entities which are typically seen by an operating system. Storage such as tapes and floppies without file systems on them are typically not allocated in chunks by the operating system to requesting applications, and therefore shouldn't appear in this table. Examples of valid storage for this table include disk partitions, file systems, ram (for some architectures this is further segmented into regular memory, extended memory, and so on), backing store for virtual memory (`swap space'). This table is intended to be a useful diagnostic for `out of memory' and `out of buffers' types of failures. In addition, it can be a useful performance monitoring tool for tracking memory, disk, or buffer usage.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrStorageEntry

hrStorageEntry 1.3.6.1.2.1.25.2.3.1
A (conceptual) entry for one logical storage area on the host. As an example, an instance of the hrStorageType object might be named hrStorageType.3
Status: current Access: not-accessible
OBJECT-TYPE    
  HrStorageEntry  

hrStorageIndex 1.3.6.1.2.1.25.2.3.1.1
A unique value for each logical storage area contained by the host.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hrStorageType 1.3.6.1.2.1.25.2.3.1.2
The type of storage represented by this entry.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

hrStorageDescr 1.3.6.1.2.1.25.2.3.1.3
A description of the type and instance of the storage described by this entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hrStorageAllocationUnits 1.3.6.1.2.1.25.2.3.1.4
The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number will commonly be greater than one. Otherwise this number will typically be one.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hrStorageSize 1.3.6.1.2.1.25.2.3.1.5
The size of the storage represented by this entry, in units of hrStorageAllocationUnits.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

hrStorageUsed 1.3.6.1.2.1.25.2.3.1.6
The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hrStorageAllocationFailures 1.3.6.1.2.1.25.2.3.1.7
The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a SYNTAX of Counter32, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hrDeviceTypes 1.3.6.1.2.1.25.3.1
OBJECT IDENTIFIER    

hrDeviceOther 1.3.6.1.2.1.25.3.1.1
OBJECT IDENTIFIER    

hrDeviceUnknown 1.3.6.1.2.1.25.3.1.2
OBJECT IDENTIFIER    

hrDeviceProcessor 1.3.6.1.2.1.25.3.1.3
OBJECT IDENTIFIER    

hrDeviceNetwork 1.3.6.1.2.1.25.3.1.4
OBJECT IDENTIFIER    

hrDevicePrinter 1.3.6.1.2.1.25.3.1.5
OBJECT IDENTIFIER    

hrDeviceDiskStorage 1.3.6.1.2.1.25.3.1.6
OBJECT IDENTIFIER    

hrDeviceVideo 1.3.6.1.2.1.25.3.1.10
OBJECT IDENTIFIER    

hrDeviceAudio 1.3.6.1.2.1.25.3.1.11
OBJECT IDENTIFIER    

hrDeviceCoprocessor 1.3.6.1.2.1.25.3.1.12
OBJECT IDENTIFIER    

hrDeviceKeyboard 1.3.6.1.2.1.25.3.1.13
OBJECT IDENTIFIER    

hrDeviceModem 1.3.6.1.2.1.25.3.1.14
OBJECT IDENTIFIER    

hrDeviceParallelPort 1.3.6.1.2.1.25.3.1.15
OBJECT IDENTIFIER    

hrDevicePointing 1.3.6.1.2.1.25.3.1.16
OBJECT IDENTIFIER    

hrDeviceSerialPort 1.3.6.1.2.1.25.3.1.17
OBJECT IDENTIFIER    

hrDeviceTape 1.3.6.1.2.1.25.3.1.18
OBJECT IDENTIFIER    

hrDeviceClock 1.3.6.1.2.1.25.3.1.19
OBJECT IDENTIFIER    

hrDeviceVolatileMemory 1.3.6.1.2.1.25.3.1.20
OBJECT IDENTIFIER    

hrDeviceNonVolatileMemory 1.3.6.1.2.1.25.3.1.21
OBJECT IDENTIFIER    

hrDeviceTable 1.3.6.1.2.1.25.3.2
The (conceptual) table of devices contained by the host.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrDeviceEntry

hrDeviceEntry 1.3.6.1.2.1.25.3.2.1
A (conceptual) entry for one device contained by the host. As an example, an instance of the hrDeviceType object might be named hrDeviceType.3
Status: current Access: not-accessible
OBJECT-TYPE    
  HrDeviceEntry  

hrDeviceIndex 1.3.6.1.2.1.25.3.2.1.1
A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the next re-initialization.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hrDeviceType 1.3.6.1.2.1.25.3.2.1.2
An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to this device. If this value is `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry exists in the hrNetworkTable which corresponds to this device. If this value is `hrDevicePrinter { hrDeviceTypes 5 }', then an entry exists in the hrPrinterTable which corresponds to this device. If this value is `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an entry exists in the hrDiskStorageTable which corresponds to this device.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

hrDeviceDescr 1.3.6.1.2.1.25.3.2.1.3
A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

hrDeviceID 1.3.6.1.2.1.25.3.2.1.4
The product ID for this device.
Status: current Access: read-only
OBJECT-TYPE    
  ProductID  

hrDeviceStatus 1.3.6.1.2.1.25.3.2.1.5
The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. running(2) indicates that the device is up and running and that no unusual error conditions are known. The warning(3) state indicates that agent has been informed of an unusual error condition by the operational software (e.g., a disk device driver) but that the device is still 'operational'. An example would be high number of soft errors on a disk. A value of testing(4), indicates that the device is not available for use because it is in the testing state. The state of down(5) is used only when the agent has been informed that the device is not available for any use.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), running(2), warning(3), testing(4), down(5)  

hrDeviceErrors 1.3.6.1.2.1.25.3.2.1.6
The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter32, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hrProcessorTable 1.3.6.1.2.1.25.3.3
The (conceptual) table of processors contained by the host. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value of the hrDeviceType object is `hrDeviceProcessor'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrProcessorEntry

hrProcessorEntry 1.3.6.1.2.1.25.3.3.1
A (conceptual) entry for one processor contained by the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the hrProcessorEntry. As an example of how objects in this table are named, an instance of the hrProcessorFrwID object might be named hrProcessorFrwID.3
Status: current Access: not-accessible
OBJECT-TYPE    
  HrProcessorEntry  

hrProcessorFrwID 1.3.6.1.2.1.25.3.3.1.1
The product ID of the firmware associated with the processor.
Status: current Access: read-only
OBJECT-TYPE    
  ProductID  

hrProcessorLoad 1.3.6.1.2.1.25.3.3.1.2
The average, over the last minute, of the percentage of time that this processor was not idle.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hrNetworkTable 1.3.6.1.2.1.25.3.4
The (conceptual) table of network devices contained by the host. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value of the hrDeviceType object is `hrDeviceNetwork'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrNetworkEntry

hrNetworkEntry 1.3.6.1.2.1.25.3.4.1
A (conceptual) entry for one network device contained by the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the hrNetworkEntry. As an example of how objects in this table are named, an instance of the hrNetworkIfIndex object might be named hrNetworkIfIndex.3
Status: current Access: not-accessible
OBJECT-TYPE    
  HrNetworkEntry  

hrNetworkIfIndex 1.3.6.1.2.1.25.3.4.1.1
The value of ifIndex which corresponds to this network device. If this network device is not contained in the mib2.ifTable, then 0 shall be returned for this variable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hrPrinterTable 1.3.6.1.2.1.25.3.5
The (conceptual) table of printers local to the host. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value of the hrDeviceType object is `hrDevicePrinter'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrPrinterEntry

hrPrinterEntry 1.3.6.1.2.1.25.3.5.1
A (conceptual) entry for one printer local to the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the hrPrinterEntry. As an example of how objects in this table are named, an instance of the hrPrinterStatus object might be named hrPrinterStatus.3
Status: current Access: not-accessible
OBJECT-TYPE    
  HrPrinterEntry  

hrPrinterStatus 1.3.6.1.2.1.25.3.5.1.1
The current status of this printer device. When in the idle(3), printing(4), or warmup(5) state, the corresponding hrDeviceStatus should be running(2) or warning(3). When in the unknown(2) state, the corresponding hrDeviceStatus should be unknown(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), idle(3), printing(4), warmup(5)  

hrPrinterDetectedErrorState 1.3.6.1.2.1.25.3.5.1.2
This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definitions: Condition Bit # hrDeviceStatus lowPaper 0 warning(3) or down(5) noPaper 1 warning(3) or down(5) lowToner 2 warning(3) or down(5) noToner 3 warning(3) or down(5) doorOpen 4 warning(3) or down(5) jammed 5 warning(3) or down(5) offline 6 warning(3) or down(5) serviceRequested 7 warning(3) or down(5) inputTrayMissing 8 warning(3) or down(5) outputTrayMissing 9 warning(3) or down(5) markerSupplyMissing 10 warning(3) or down(5) outputNearFull 11 warning(3) or down(5) outputFull 12 warning(3) or down(5) inputTrayEmpty 13 warning(3) or down(5) overduePreventMaint 14 warning(3) or down(5) If multiple conditions are currently detected and the hrDeviceStatus would not otherwise be unknown(1) or testing(4), the hrDeviceStatus shall correspond to the worst state of those indicated, where down(5) is worse than warning(3) which is worse than running(2). Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the condition was detected, while a zero bit encodes that the condition was not detected. This object is useful for alerting an operator to specific warning or error conditions that may occur, especially those requiring human intervention. Because error bits 8 through 14 can indicate a printer that is still functioning, the corresponding (recommended) printer hrDeviceStatus can be either warning(3) or down(5). New bits may be defined by standards-track MIB modules but the maximum size of instances of this variable should be 128 octets.
Status: current Access: read-only
OBJECT-TYPE    
  BITS lowPaper(0), noPaper(1), lowToner(2), noToner(3), doorOpen(4), jammed(5), offline(6), serviceRequested(7), inputTrayMissing(8), outputTrayMissing(9), markerSupplyMissing(10), outputNearFull(11), outputFull(12), inputTrayEmpty(13), overduePreventMaint(14)  

hrDiskStorageTable 1.3.6.1.2.1.25.3.6
The (conceptual) table of long-term storage devices contained by the host. In particular, disk devices accessed remotely over a network are not included here. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value of the hrDeviceType object is `hrDeviceDiskStorage'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrDiskStorageEntry

hrDiskStorageEntry 1.3.6.1.2.1.25.3.6.1
A (conceptual) entry for one long-term storage device contained by the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the hrDiskStorageEntry. As an example, an instance of the hrDiskStorageCapacity object might be named hrDiskStorageCapacity.3
Status: current Access: not-accessible
OBJECT-TYPE    
  HrDiskStorageEntry  

hrDiskStorageAccess 1.3.6.1.2.1.25.3.6.1.1
An indication if this long-term storage device is readable and writable or only readable. This should reflect the media type, any write-protect mechanism, and any device configuration that affects the entire device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER readWrite(1), readOnly(2)  

hrDiskStorageMedia 1.3.6.1.2.1.25.3.6.1.2
An indication of the type of media used in this long-term storage device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), hardDisk(3), floppyDisk(4), opticalDiskROM(5), opticalDiskWORM(6), opticalDiskRW(7), ramDisk(8)  

hrDiskStorageRemoveble 1.3.6.1.2.1.25.3.6.1.3
Denotes whether or not the disk media may be removed from the drive.
Status: current Access: read-only
OBJECT-TYPE    
  Boolean  

hrDiskStorageCapacity 1.3.6.1.2.1.25.3.6.1.4
The total size for this long-term storage device.
Status: current Access: read-only
OBJECT-TYPE    
  KBytes  

hrPartitionTable 1.3.6.1.2.1.25.3.7
The (conceptual) table of partitions for long-term storage devices contained by the host. In particular, partitions accessed remotely over a network are not included here.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrPartitionEntry

hrPartitionEntry 1.3.6.1.2.1.25.3.7.1
A (conceptual) entry for one partition. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the hrPartitionEntry. As an example of how objects in this table are named, an instance of the hrPartitionSize object might be named hrPartitionSize.3.1
Status: current Access: not-accessible
OBJECT-TYPE    
  HrPartitionEntry  

hrPartitionIndex 1.3.6.1.2.1.25.3.7.1.1
A unique value for each partition on this long- term storage device. The value for each long-term storage device must remain constant at least from one re-initialization of the agent to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hrPartitionLabel 1.3.6.1.2.1.25.3.7.1.2
A textual description of this partition.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString Size(0..128)  

hrPartitionID 1.3.6.1.2.1.25.3.7.1.3
A descriptor which uniquely represents this partition to the responsible operating system. On some systems, this might take on a binary representation.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hrPartitionSize 1.3.6.1.2.1.25.3.7.1.4
The size of this partition.
Status: current Access: read-only
OBJECT-TYPE    
  KBytes  

hrPartitionFSIndex 1.3.6.1.2.1.25.3.7.1.5
The index of the file system mounted on this partition. If no file system is mounted on this partition, then this value shall be zero. Note that multiple partitions may point to one file system, denoting that that file system resides on those partitions. Multiple file systems may not reside on one partition.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hrFSTable 1.3.6.1.2.1.25.3.8
The (conceptual) table of file systems local to this host or remotely mounted from a file server. File systems that are in only one user's environment on a multi-user system will not be included in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrFSEntry

hrFSEntry 1.3.6.1.2.1.25.3.8.1
A (conceptual) entry for one file system local to this host or remotely mounted from a file server. File systems that are in only one user's environment on a multi-user system will not be included in this table. As an example of how objects in this table are named, an instance of the hrFSMountPoint object might be named hrFSMountPoint.3
Status: current Access: not-accessible
OBJECT-TYPE    
  HrFSEntry  

hrFSTypes 1.3.6.1.2.1.25.3.9
OBJECT IDENTIFIER    

hrFSOther 1.3.6.1.2.1.25.3.9.1
OBJECT IDENTIFIER    

hrFSUnknown 1.3.6.1.2.1.25.3.9.2
OBJECT IDENTIFIER    

hrFSBerkeleyFFS 1.3.6.1.2.1.25.3.9.3
OBJECT IDENTIFIER    

hrFSSys5FS 1.3.6.1.2.1.25.3.9.4
OBJECT IDENTIFIER    

hrFSFat 1.3.6.1.2.1.25.3.9.5
OBJECT IDENTIFIER    

hrFSHPFS 1.3.6.1.2.1.25.3.9.6
OBJECT IDENTIFIER    

hrFSHFS 1.3.6.1.2.1.25.3.9.7
OBJECT IDENTIFIER    

hrFSMFS 1.3.6.1.2.1.25.3.9.8
OBJECT IDENTIFIER    

hrFSNTFS 1.3.6.1.2.1.25.3.9.9
OBJECT IDENTIFIER    

hrFSVNode 1.3.6.1.2.1.25.3.9.10
OBJECT IDENTIFIER    

hrFSJournaled 1.3.6.1.2.1.25.3.9.11
OBJECT IDENTIFIER    

hrFSiso9660 1.3.6.1.2.1.25.3.9.12
OBJECT IDENTIFIER    

hrFSRockRidge 1.3.6.1.2.1.25.3.9.13
OBJECT IDENTIFIER    

hrFSNFS 1.3.6.1.2.1.25.3.9.14
OBJECT IDENTIFIER    

hrFSNetware 1.3.6.1.2.1.25.3.9.15
OBJECT IDENTIFIER    

hrFSAFS 1.3.6.1.2.1.25.3.9.16
OBJECT IDENTIFIER    

hrFSDFS 1.3.6.1.2.1.25.3.9.17
OBJECT IDENTIFIER    

hrFSAppleshare 1.3.6.1.2.1.25.3.9.18
OBJECT IDENTIFIER    

hrFSRFS 1.3.6.1.2.1.25.3.9.19
OBJECT IDENTIFIER    

hrFSDGCFS 1.3.6.1.2.1.25.3.9.20
OBJECT IDENTIFIER    

hrFSBFS 1.3.6.1.2.1.25.3.9.21
OBJECT IDENTIFIER    

hrFSIndex 1.3.6.1.2.1.25.3.8.1.1
A unique value for each file system local to this host. The value for each file system must remain constant at least from one re-initialization of the agent to the next re-initialization.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hrFSMountPoint 1.3.6.1.2.1.25.3.8.1.2
The path name of the root of this file system.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString Size(0..128)  

hrFSRemoteMountPoint 1.3.6.1.2.1.25.3.8.1.3
A description of the name and/or address of the server that this file system is mounted from. This may also include parameters such as the mount point on the remote file system. If this is not a remote file system, this string should have a length of zero.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString Size(0..128)  

hrFSType 1.3.6.1.2.1.25.3.8.1.4
The value of this object identifies the type of this file system.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

hrFSAccess 1.3.6.1.2.1.25.3.8.1.5
An indication if this file system is logically configured by the operating system to be readable and writable or only readable. This does not represent any local access-control policy, except one that is applied to the file system as a whole.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER readWrite(1), readOnly(2)  

hrFSBootable 1.3.6.1.2.1.25.3.8.1.6
A flag indicating whether this file system is bootable.
Status: current Access: read-only
OBJECT-TYPE    
  Boolean  

hrFSStorageIndex 1.3.6.1.2.1.25.3.8.1.7
The index of the hrStorageEntry that represents information about this file system. If there is no such information available, then this value shall be zero. The relevant storage entry will be useful in tracking the percent usage of this file system and diagnosing errors that may occur when it runs out of space.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

hrFSLastFullBackupDate 1.3.6.1.2.1.25.3.8.1.8
The last date at which this complete file system was copied to another storage device for backup. This information is useful for ensuring that backups are being performed regularly. If this information is not known, then this variable shall have the value corresponding to January 1, year 0000, 00:00:00.0, which is encoded as (hex)'00 00 01 01 00 00 00 00'.
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

hrFSLastPartialBackupDate 1.3.6.1.2.1.25.3.8.1.9
The last date at which a portion of this file system was copied to another storage device for backup. This information is useful for ensuring that backups are being performed regularly. If this information is not known, then this variable shall have the value corresponding to January 1, year 0000, 00:00:00.0, which is encoded as (hex)'00 00 01 01 00 00 00 00'.
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

hrSWOSIndex 1.3.6.1.2.1.25.4.1
The value of the hrSWRunIndex for the hrSWRunEntry that represents the primary operating system running on this host. This object is useful for quickly and uniquely identifying that primary operating system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hrSWRunTable 1.3.6.1.2.1.25.4.2
The (conceptual) table of software running on the host.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrSWRunEntry

hrSWRunEntry 1.3.6.1.2.1.25.4.2.1
A (conceptual) entry for one piece of software running on the host Note that because the installed software table only contains information for software stored locally on this host, not every piece of running software will be found in the installed software table. This is true of software that was loaded and run from a non-local source, such as a network-mounted file system. As an example of how objects in this table are named, an instance of the hrSWRunName object might be named hrSWRunName.1287
Status: current Access: not-accessible
OBJECT-TYPE    
  HrSWRunEntry  

hrSWRunIndex 1.3.6.1.2.1.25.4.2.1.1
A unique value for each piece of software running on the host. Wherever possible, this should be the system's native, unique identification number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hrSWRunName 1.3.6.1.2.1.25.4.2.1.2
A textual description of this running piece of software, including the manufacturer, revision, and the name by which it is commonly known. If this software was installed locally, this should be the same string as used in the corresponding hrSWInstalledName.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString Size(0..64)  

hrSWRunID 1.3.6.1.2.1.25.4.2.1.3
The product ID of this running piece of software.
Status: current Access: read-only
OBJECT-TYPE    
  ProductID  

hrSWRunPath 1.3.6.1.2.1.25.4.2.1.4
A description of the location on long-term storage (e.g. a disk drive) from which this software was loaded.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString Size(0..128)  

hrSWRunParameters 1.3.6.1.2.1.25.4.2.1.5
A description of the parameters supplied to this software when it was initially loaded.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString Size(0..128)  

hrSWRunType 1.3.6.1.2.1.25.4.2.1.6
The type of this software.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), operatingSystem(2), deviceDriver(3), application(4)  

hrSWRunStatus 1.3.6.1.2.1.25.4.2.1.7
The status of this running piece of software. Setting this value to invalid(4) shall cause this software to stop running and to be unloaded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER running(1), runnable(2), notRunnable(3), invalid(4)  

hrSWRunPerfTable 1.3.6.1.2.1.25.5.1
The (conceptual) table of running software performance metrics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrSWRunPerfEntry

hrSWRunPerfEntry 1.3.6.1.2.1.25.5.1.1
A (conceptual) entry containing software performance metrics. As an example, an instance of the hrSWRunPerfCPU object might be named hrSWRunPerfCPU.1287
Status: current Access: not-accessible
OBJECT-TYPE    
  HrSWRunPerfEntry  

hrSWRunPerfCPU 1.3.6.1.2.1.25.5.1.1.1
The number of centi-seconds of the total system's CPU resources consumed by this process. Note that on a multi-processor system, this value may increment by more than one centi-second in one centi-second of real (wall clock) time.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hrSWRunPerfMem 1.3.6.1.2.1.25.5.1.1.2
The total amount of real system memory allocated to this process.
Status: current Access: read-only
OBJECT-TYPE    
  KBytes  

hrSWInstalledLastChange 1.3.6.1.2.1.25.6.1
The value of sysUpTime when an entry in the hrSWInstalledTable was last added, renamed, or deleted. Because this table is likely to contain many entries, polling of this object allows a management station to determine when re-downloading of the table might be useful.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

hrSWInstalledLastUpdateTime 1.3.6.1.2.1.25.6.2
The value of sysUpTime when the hrSWInstalledTable was last completely updated. Because caching of this data will be a popular implementation strategy, retrieval of this object allows a management station to obtain a guarantee that no data in this table is older than the indicated time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

hrSWInstalledTable 1.3.6.1.2.1.25.6.3
The (conceptual) table of software installed on this host.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HrSWInstalledEntry

hrSWInstalledEntry 1.3.6.1.2.1.25.6.3.1
A (conceptual) entry for a piece of software installed on this host. As an example of how objects in this table are named, an instance of the hrSWInstalledName object might be named hrSWInstalledName.96
Status: current Access: not-accessible
OBJECT-TYPE    
  HrSWInstalledEntry  

hrSWInstalledIndex 1.3.6.1.2.1.25.6.3.1.1
A unique value for each piece of software installed on the host. This value shall be in the range from 1 to the number of pieces of software installed on the host.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

hrSWInstalledName 1.3.6.1.2.1.25.6.3.1.2
A textual description of this installed piece of software, including the manufacturer, revision, the name by which it is commonly known, and optionally, its serial number.
Status: current Access: read-only
OBJECT-TYPE    
  InternationalDisplayString Size(0..64)  

hrSWInstalledID 1.3.6.1.2.1.25.6.3.1.3
The product ID of this installed piece of software.
Status: current Access: read-only
OBJECT-TYPE    
  ProductID  

hrSWInstalledType 1.3.6.1.2.1.25.6.3.1.4
The type of this software.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), operatingSystem(2), deviceDriver(3), application(4)  

hrSWInstalledDate 1.3.6.1.2.1.25.6.3.1.5
The last-modification date of this application as it would appear in a directory listing. If the underlying system supports this variable, but the date of a particular entry is indeterminable, then January 1, year 0000, 00:00:00.0, which is encoded (hex)'00 00 01 01 00 00 00 00, shall be returned.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hrMIBCompliances 1.3.6.1.2.1.25.7.1
OBJECT IDENTIFIER    

hrMIBGroups 1.3.6.1.2.1.25.7.2
OBJECT IDENTIFIER    

hrMIBCompliance 1.3.6.1.2.1.25.7.1.1
Describes the requirements for conformance to the Host Resources MIB
Status: current Access: read-only
MODULE-COMPLIANCE    

hrSystemGroup 1.3.6.1.2.1.25.7.2.1
The System Group
Status: current Access: read-only
OBJECT-GROUP    

hrStorageGroup 1.3.6.1.2.1.25.7.2.2
The Storage Group
Status: current Access: read-only
OBJECT-GROUP    

hrDeviceGroup 1.3.6.1.2.1.25.7.2.3
The Device Group
Status: current Access: read-only
OBJECT-GROUP    

hrSWRunGroup 1.3.6.1.2.1.25.7.2.4
The optional Running Software Group
Status: current Access: read-only
OBJECT-GROUP    

hrSWInstalledGroup 1.3.6.1.2.1.25.7.2.5
The optional Installed Software Group
Status: current Access: read-only
OBJECT-GROUP