HOST-RESOURCES-TYPES

File: HOST-RESOURCES-TYPES.mib (11969 bytes)

Imported modules

SNMPv2-SMI HOST-RESOURCES-MIB

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY hrMIBAdminInfo
hrStorage hrDevice

Defined Values

hostResourcesTypesModule 1.3.6.1.2.1.25.7.4
This MIB module registers type definitions for storage types, device types, and file system types. After the initial revision, this module will be maintained by IANA.
MODULE-IDENTITY    

hrStorageTypes 1.3.6.1.2.1.25.2.1
OBJECT IDENTIFIER    

hrStorageOther 1.3.6.1.2.1.25.2.1.1
The storage type identifier used when no other defined type is appropriate.
Status: current Access: read-only
OBJECT-IDENTITY    

hrStorageRam 1.3.6.1.2.1.25.2.1.2
The storage type identifier used for RAM.
Status: current Access: read-only
OBJECT-IDENTITY    

hrStorageVirtualMemory 1.3.6.1.2.1.25.2.1.3
The storage type identifier used for virtual memory, temporary storage of swapped or paged memory.
Status: current Access: read-only
OBJECT-IDENTITY    

hrStorageFixedDisk 1.3.6.1.2.1.25.2.1.4
The storage type identifier used for non-removable rigid rotating magnetic storage devices.
Status: current Access: read-only
OBJECT-IDENTITY    

hrStorageRemovableDisk 1.3.6.1.2.1.25.2.1.5
The storage type identifier used for removable rigid rotating magnetic storage devices.
Status: current Access: read-only
OBJECT-IDENTITY    

hrStorageFloppyDisk 1.3.6.1.2.1.25.2.1.6
The storage type identifier used for non-rigid rotating magnetic storage devices.
Status: current Access: read-only
OBJECT-IDENTITY    

hrStorageCompactDisc 1.3.6.1.2.1.25.2.1.7
The storage type identifier used for read-only rotating optical storage devices.
Status: current Access: read-only
OBJECT-IDENTITY    

hrStorageRamDisk 1.3.6.1.2.1.25.2.1.8
The storage type identifier used for a file system that is stored in RAM.
Status: current Access: read-only
OBJECT-IDENTITY    

hrStorageFlashMemory 1.3.6.1.2.1.25.2.1.9
The storage type identifier used for flash memory.
Status: current Access: read-only
OBJECT-IDENTITY    

hrStorageNetworkDisk 1.3.6.1.2.1.25.2.1.10
The storage type identifier used for a networked file system.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceTypes 1.3.6.1.2.1.25.3.1
OBJECT IDENTIFIER    

hrDeviceOther 1.3.6.1.2.1.25.3.1.1
The device type identifier used when no other defined type is appropriate.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceUnknown 1.3.6.1.2.1.25.3.1.2
The device type identifier used when the device type is unknown.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceProcessor 1.3.6.1.2.1.25.3.1.3
The device type identifier used for a CPU.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceNetwork 1.3.6.1.2.1.25.3.1.4
The device type identifier used for a network interface.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDevicePrinter 1.3.6.1.2.1.25.3.1.5
The device type identifier used for a printer.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceDiskStorage 1.3.6.1.2.1.25.3.1.6
The device type identifier used for a disk drive.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceVideo 1.3.6.1.2.1.25.3.1.10
The device type identifier used for a video device.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceAudio 1.3.6.1.2.1.25.3.1.11
The device type identifier used for an audio device.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceCoprocessor 1.3.6.1.2.1.25.3.1.12
The device type identifier used for a co-processor.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceKeyboard 1.3.6.1.2.1.25.3.1.13
The device type identifier used for a keyboard device.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceModem 1.3.6.1.2.1.25.3.1.14
The device type identifier used for a modem.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceParallelPort 1.3.6.1.2.1.25.3.1.15
The device type identifier used for a parallel port.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDevicePointing 1.3.6.1.2.1.25.3.1.16
The device type identifier used for a pointing device (e.g., a mouse).
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceSerialPort 1.3.6.1.2.1.25.3.1.17
The device type identifier used for a serial port.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceTape 1.3.6.1.2.1.25.3.1.18
The device type identifier used for a tape storage device.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceClock 1.3.6.1.2.1.25.3.1.19
The device type identifier used for a clock device.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceVolatileMemory 1.3.6.1.2.1.25.3.1.20
The device type identifier used for a volatile memory storage device.
Status: current Access: read-only
OBJECT-IDENTITY    

hrDeviceNonVolatileMemory 1.3.6.1.2.1.25.3.1.21
The device type identifier used for a non-volatile memory storage device.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSTypes 1.3.6.1.2.1.25.3.9
OBJECT IDENTIFIER    

hrFSOther 1.3.6.1.2.1.25.3.9.1
The file system type identifier used when no other defined type is appropriate.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSUnknown 1.3.6.1.2.1.25.3.9.2
The file system type identifier used when the type of file system is unknown.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSBerkeleyFFS 1.3.6.1.2.1.25.3.9.3
The file system type identifier used for the Berkeley Fast File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSSys5FS 1.3.6.1.2.1.25.3.9.4
The file system type identifier used for the System V File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSFat 1.3.6.1.2.1.25.3.9.5
The file system type identifier used for DOS's FAT file system.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSHPFS 1.3.6.1.2.1.25.3.9.6
The file system type identifier used for OS/2's High Performance File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSHFS 1.3.6.1.2.1.25.3.9.7
The file system type identifier used for the Macintosh Hierarchical File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSMFS 1.3.6.1.2.1.25.3.9.8
The file system type identifier used for the Macintosh File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSNTFS 1.3.6.1.2.1.25.3.9.9
The file system type identifier used for the Windows NT File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSVNode 1.3.6.1.2.1.25.3.9.10
The file system type identifier used for the VNode File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSJournaled 1.3.6.1.2.1.25.3.9.11
The file system type identifier used for the Journaled File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSiso9660 1.3.6.1.2.1.25.3.9.12
The file system type identifier used for the ISO 9660 File System for CD's.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSRockRidge 1.3.6.1.2.1.25.3.9.13
The file system type identifier used for the RockRidge File System for CD's.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSNFS 1.3.6.1.2.1.25.3.9.14
The file system type identifier used for the NFS File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSNetware 1.3.6.1.2.1.25.3.9.15
The file system type identifier used for the Netware File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSAFS 1.3.6.1.2.1.25.3.9.16
The file system type identifier used for the Andrew File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSDFS 1.3.6.1.2.1.25.3.9.17
The file system type identifier used for the OSF DCE Distributed File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSAppleshare 1.3.6.1.2.1.25.3.9.18
The file system type identifier used for the AppleShare File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSRFS 1.3.6.1.2.1.25.3.9.19
The file system type identifier used for the RFS File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSDGCFS 1.3.6.1.2.1.25.3.9.20
The file system type identifier used for the Data General DGCFS.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSBFS 1.3.6.1.2.1.25.3.9.21
The file system type identifier used for the SVR4 Boot File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSFAT32 1.3.6.1.2.1.25.3.9.22
The file system type identifier used for the Windows FAT32 File System.
Status: current Access: read-only
OBJECT-IDENTITY    

hrFSLinuxExt2 1.3.6.1.2.1.25.3.9.23
The file system type identifier used for the Linux EXT2 File System.
Status: current Access: read-only
OBJECT-IDENTITY