HH3C-PU-MAN-MIB
File:
HH3C-PU-MAN-MIB.mib (12787 bytes)
Imported modules
Imported symbols
Defined Types
Hh3cPUExternalOutputAlarmEntry |
|
SEQUENCE |
|
|
|
|
hh3cPUExternalOutputAlarmChannelID |
Unsigned32 |
|
|
hh3cPUExternalOutputAlarmStatus |
TruthValue |
|
Hh3cPUECVideoChannelEntry |
|
SEQUENCE |
|
|
|
|
hh3cPUECVideoChannelID |
Unsigned32 |
|
|
hh3cPUECVideoChannelName |
DisplayString |
|
|
hh3cPUECVideoChannelServiceStatus |
BITS |
|
Defined Values
hh3cPUMan |
1.3.6.1.4.1.25506.9.2 |
The PU includes those device like EC(Encoder), DC(Decoder) and
ECR(Encoder Recorder). The PU will survey the remote video and
audio. This MIB is defined to manage the PU as our
private MIB node according to its specific capability. |
MODULE-IDENTITY |
|
|
|
hh3cPUisOnline |
1.3.6.1.4.1.25506.9.2.1.1.1 |
The PU online status indicates whether the PU is normally
registered into the VM. True indicates that the PU is
normally registered into the VM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
hh3cPUCMSAddr |
1.3.6.1.4.1.25506.9.2.1.1.2 |
The IP address of the CMS.
All zero address indicates the CMS address is not configured. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hh3cPUVersionServerAddr |
1.3.6.1.4.1.25506.9.2.1.1.3 |
The IP address of the version server.
All zero address indicates the version server is not configured
or does not support remote upgrade. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hh3cPUExternalOutputAlarmEntry |
1.3.6.1.4.1.25506.9.2.1.2.2.1 |
External output alarm entry |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Hh3cPUExternalOutputAlarmEntry |
|
|
hh3cPUECCameraOnlines |
1.3.6.1.4.1.25506.9.2.2.1.1 |
Number of online cameras connected to an EC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..100 |
|
hh3cPUECCameraAvailRate |
1.3.6.1.4.1.25506.9.2.2.1.2 |
Camera available rate. That is, the ratio of available cameras
to total cameras connected to an EC. It ranges from 0 to 100. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..100 |
|
hh3cPUECVideoChannelEntry |
1.3.6.1.4.1.25506.9.2.2.2.1.1 |
Video channel entry |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Hh3cPUECVideoChannelEntry |
|
|
hh3cPUECVideoChannelName |
1.3.6.1.4.1.25506.9.2.2.2.1.1.2 |
The name of the video channel.
It is suggested that the name includes the channel ID
information. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
hh3cPUECVideoChannelServiceStatus |
1.3.6.1.4.1.25506.9.2.2.2.1.1.3 |
The service status of the video channel.
0 the status is not known.
1 the video is not used or the channel has no signal.
2 the camera is kinescoping.
3 the camera is take snapshot. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BITS |
unknown(0), unused(1), kinescope(2), snapshot(3) |
|
hh3cPUDCRcvVideoPackets |
1.3.6.1.4.1.25506.9.2.3.1.1 |
The total number of video packets which are received from
interfaces. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hh3cPUDCRcvVideoRefFrames |
1.3.6.1.4.1.25506.9.2.3.1.2 |
The total number of video reference frames which are received
from interfaces. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
hh3cPUECManVideoLossTrap |
1.3.6.1.4.1.25506.9.2.2.3.0.2 |
Send a trap about video loss. Video loss is that no video
signal is inputted to the EC. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
hh3cPUECManVideoRecoverTrap |
1.3.6.1.4.1.25506.9.2.2.3.0.3 |
Send a trap about video recovery after loss. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
hh3cPUECManMotionDetectTrap |
1.3.6.1.4.1.25506.9.2.2.3.0.4 |
Send a trap about motion detection. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
hh3cPUECManOnLineFailureTrap |
1.3.6.1.4.1.25506.9.2.2.3.0.5 |
Send a trap when EC can not register the CMS. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
hh3cPUECManConnectionCMSFailureTrap |
1.3.6.1.4.1.25506.9.2.2.3.0.6 |
Send a trap when the connection with the CMS breaks down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
hh3cPUECManConnectionVerSrvFailureTrap |
1.3.6.1.4.1.25506.9.2.2.3.0.7 |
Send a trap when the connection with the version server breaks
down or can not create. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
hh3cPUECManFlashFailureTrap |
1.3.6.1.4.1.25506.9.2.2.3.0.8 |
Send a trap about flash failure. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
hh3cPUECManCameraShelterTrap |
1.3.6.1.4.1.25506.9.2.2.3.0.9 |
Send a trap when a camera is sheltered. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
hh3cPUECRegionCoordinateX1 |
1.3.6.1.4.1.25506.9.2.2.3.1.1 |
The horizontal coordinate of top left point of the motion
detection region. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
hh3cPUECRegionCoordinateY1 |
1.3.6.1.4.1.25506.9.2.2.3.1.2 |
The vertical coordinate of top left point of the motion
detection region. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
hh3cPUECRegionCoordinateX2 |
1.3.6.1.4.1.25506.9.2.2.3.1.3 |
The horizontal coordinate of botton right point of the
motion detection region. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
hh3cPUECRegionCoordinateY2 |
1.3.6.1.4.1.25506.9.2.2.3.1.4 |
The horizontal coordinate of botton right point of the
motion detection region. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|