HH3C-LswINF-MIB

Imported modules

SNMPv2-TC	SNMPv2-SMI	IF-MIB
HH3C-OID-MIB

Imported symbols

RowStatus	DisplayString	TruthValue
TEXTUAL-CONVENTION	MODULE-IDENTITY	OBJECT-TYPE
Integer32	Counter64	Unsigned32
ifIndex	InterfaceIndex	hh3clswCommon

Defined Types

PortList
Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
TEXTUAL-CONVENTION
	OCTET STRING

VlanIndex
A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB.
TEXTUAL-CONVENTION
	Unsigned32	0..4294967295

DropDirection
Representing the direction of dropping packets, if applicable.
TEXTUAL-CONVENTION
	INTEGER	disable(1), enableInbound(2), enableOutbound(3), enableBoth(4)

SpeedModeFlag
Type of Negotiable Speed mode.
TEXTUAL-CONVENTION
	BITS	s10M(0), s100M(1), s1000M(2), s10000M(3), s24000M(4), s40000M(5), s100000M(6)

Hh3cIfXXEntry
SEQUENCE
	hh3cifUnBoundPort	TruthValue
	hh3cifISPhyPort	TruthValue
	hh3cifAggregatePort	TruthValue
	hh3cifMirrorPort	TruthValue
	hh3cifVLANType	INTEGER
	hh3cifMcastControl	INTEGER
	hh3cifFlowControl	TruthValue
	hh3cifSrcMacControl	TruthValue
	hh3cifClearStat	INTEGER
	hh3cifXXBasePortIndex	INTEGER
	hh3cifXXDevPortIndex	INTEGER
	hh3cifPpsMcastControl	Integer32
	hh3cifPpsBcastDisValControl	INTEGER
	hh3cifUniSuppressionStep	Integer32
	hh3cifPpsUniSuppressionMax	Integer32
	hh3cifMulSuppressionStep	Integer32
	hh3cifPpsMulSuppressionMax	Integer32
	hh3cifUniSuppression	Integer32
	hh3cifPpsUniSuppression	Integer32
	hh3cifMulSuppression	Integer32
	hh3cifPpsMulSuppression	Integer32
	hh3cifComboActivePort	INTEGER
	hh3cifBMbpsMulSuppressionMax	Integer32
	hh3cifBMbpsMulSuppression	Integer32
	hh3cifBKbpsMulSuppressionMax	Integer32
	hh3cifBKbpsMulSuppressionStep	Integer32
	hh3cifBKbpsMulSuppression	Integer32
	hh3cifUnknownPacketDropMul	DropDirection
	hh3cifUnknownPacketDropUni	DropDirection
	hh3cifBMbpsUniSuppressionMax	Integer32
	hh3cifBMbpsUniSuppression	Integer32
	hh3cifBKbpsUniSuppressionMax	Integer32
	hh3cifBKbpsUniSuppressionStep	Integer32
	hh3cifBKbpsUniSuppression	Integer32
	hh3cifOutPayloadOctets	Counter64
	hh3cifInPayloadOctets	Counter64
	hh3cifInErrorPktsRate	Integer32
	hh3cifInPkts	Counter64
	hh3cifInNormalPkts	Counter64
	hh3cifOutPkts	Counter64

Hh3cIfAggregateEntry
SEQUENCE
	hh3cifAggregatePortIndex	InterfaceIndex
	hh3cifAggregatePortName	OCTET STRING
	hh3cifAggregatePortListPorts	PortList
	hh3cifAggregateModel	INTEGER
	hh3cifAggregateOperStatus	RowStatus

Hh3cifHybridPortEntry
SEQUENCE
	hh3cifHybridPortIndex	INTEGER
	hh3cifHybridTaggedVlanListLow	OCTET STRING
	hh3cifHybridTaggedVlanListHigh	OCTET STRING
	hh3cifHybridUnTaggedVlanListLow	OCTET STRING
	hh3cifHybridUnTaggedVlanListHigh	OCTET STRING

Hh3cifComboPortEntry
SEQUENCE
	hh3cifComboPortIndex	InterfaceIndex
	hh3cifComboPortCurActive	INTEGER

Hh3cifPktBufEntry
SEQUENCE
	hh3cifPktBufFree	Integer32
	hh3cifPktBufInit	Integer32
	hh3cifPktBufMin	Integer32
	hh3cifPktBufMiss	Counter64

Hh3cIfVLANTrunkStatusEntry
SEQUENCE
	hh3cifVLANTrunkIndex	InterfaceIndex
	hh3cifVLANTrunkGvrpRegistration	INTEGER
	hh3cifVLANTrunkPassListLow	OCTET STRING
	hh3cifVLANTrunkPassListHigh	OCTET STRING
	hh3cifVLANTrunkAllowListLow	OCTET STRING
	hh3cifVLANTrunkAllowListHigh	OCTET STRING

Hh3cEthernetEntry
SEQUENCE
	hh3cifEthernetDuplex	INTEGER
	hh3cifEthernetMTU	INTEGER
	hh3cifEthernetSpeed	INTEGER
	hh3cifEthernetMdi	INTEGER
	hh3cMaxMacLearn	INTEGER
	hh3cifMacAddressLearn	INTEGER
	hh3cifEthernetTest	INTEGER
	hh3cifMacAddrLearnMode	INTEGER
	hh3cifEthernetFlowInterval	INTEGER
	hh3cifEthernetIsolate	OCTET STRING
	hh3cifVlanVPNStatus	INTEGER
	hh3cifVlanVPNUplinkStatus	INTEGER
	hh3cifVlanVPNTPID	Integer32
	hh3cifIsolateGroupID	Integer32
	hh3cifisUplinkPort	INTEGER
	hh3cifEthernetAutoSpeedMask	SpeedModeFlag
	hh3cifEthernetAutoSpeed	SpeedModeFlag

Hh3cPortIsolateGroupEntry
SEQUENCE
	hh3cPortIsolateGroupIndex	Integer32
	hh3cPortIsolateUplinkIfIndex	InterfaceIndex
	hh3cPortIsolateGroupRowStatus	RowStatus
	hh3cPortIsolateGroupDescription	DisplayString

Hh3cifPortProtocolStatEntry
SEQUENCE
	hh3cifIPv4InOctets	Counter64
	hh3cifIPv4InUcastPkts	Counter64
	hh3cifIPv4InMultiPkts	Counter64
	hh3cifIPv4InBroadcastPkts	Counter64
	hh3cifIPv4InDiscards	Counter64
	hh3cifIPv4InErrors	Counter64
	hh3cifIPv4OutOctets	Counter64
	hh3cifIPv4OutUcastPkts	Counter64
	hh3cifIPv4OutMultiPkts	Counter64
	hh3cifIPv4OutBroadcastPkts	Counter64
	hh3cifIPv4OutDiscards	Counter64
	hh3cifIPv4OutErrors	Counter64
	hh3cifIPv6InOctets	Counter64
	hh3cifIPv6InUcastPkts	Counter64
	hh3cifIPv6InMultiPkts	Counter64
	hh3cifIPv6InAnycastPkts	Counter64
	hh3cifIPv6InDiscards	Counter64
	hh3cifIPv6InErrors	Counter64
	hh3cifIPv6OutOctets	Counter64
	hh3cifIPv6OutUcastPkts	Counter64
	hh3cifIPv6OutMultiPkts	Counter64
	hh3cifIPv6OutAnycastPkts	Counter64
	hh3cifIPv6OutDiscards	Counter64
	hh3cifIPv6OutErrors	Counter64

Defined Values

hh3cLswL2InfMib		1.3.6.1.4.1.25506.8.35.5
Tok_String
MODULE-IDENTITY

hh3cLswExtInterface		1.3.6.1.4.1.25506.8.35.1
OBJECT IDENTIFIER

hh3cifXXTable		1.3.6.1.4.1.25506.8.35.1.1
Extended interface information table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cIfXXEntry

hh3cifXXEntry		1.3.6.1.4.1.25506.8.35.1.1.1
Entries of extended interface information table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cIfXXEntry

hh3cifUnBoundPort		1.3.6.1.4.1.25506.8.35.1.1.1.1
Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.)
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cifISPhyPort		1.3.6.1.4.1.25506.8.35.1.1.1.2
Whether it is a physical interface.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cifAggregatePort		1.3.6.1.4.1.25506.8.35.1.1.1.3
Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.)
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cifMirrorPort		1.3.6.1.4.1.25506.8.35.1.1.1.4
Whether it is a mirror port.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hh3cifVLANType		1.3.6.1.4.1.25506.8.35.1.1.1.5
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	vLANTrunk(1), access(2), hybrid(3), fabric(4)

hh3cifMcastControl		1.3.6.1.4.1.25506.8.35.1.1.1.6
Broadcast storm suppression with the step length of 1, ranging from 0 to 100 percent. In some products the step is 5, ranging from 0 to 100.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

hh3cifFlowControl		1.3.6.1.4.1.25506.8.35.1.1.1.7
Flow control status.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hh3cifSrcMacControl		1.3.6.1.4.1.25506.8.35.1.1.1.8
Whether to filter by source MAC address.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cifClearStat		1.3.6.1.4.1.25506.8.35.1.1.1.9
Clear specify port statistics. Operation read is not supported.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

hh3cifXXBasePortIndex		1.3.6.1.4.1.25506.8.35.1.1.1.10
Index number of the port and the first port index of the device is 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hh3cifXXDevPortIndex		1.3.6.1.4.1.25506.8.35.1.1.1.11
Device index of the port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hh3cifPpsMcastControl		1.3.6.1.4.1.25506.8.35.1.1.1.12
The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifPpsBcastDisValControl		1.3.6.1.4.1.25506.8.35.1.1.1.13
Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hh3cifUniSuppressionStep		1.3.6.1.4.1.25506.8.35.1.1.1.14
The step of unicast suppression in ratio mode.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifPpsUniSuppressionMax		1.3.6.1.4.1.25506.8.35.1.1.1.15
The max pps(packet per second) value of unicast suppression in pps mode.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifMulSuppressionStep		1.3.6.1.4.1.25506.8.35.1.1.1.16
The step of multicast suppression in ratio mode.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifPpsMulSuppressionMax		1.3.6.1.4.1.25506.8.35.1.1.1.17
The max pps(packet per second) value of multicast suppression in pps mode.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifUniSuppression		1.3.6.1.4.1.25506.8.35.1.1.1.18
The unicast suppression with the ranging from 0 to 100 percent in ratio mode. The step is determined by hh3cifUniSuppressionStep.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifPpsUniSuppression		1.3.6.1.4.1.25506.8.35.1.1.1.19
The unicast suppression in pps(packet per second) mode. The max value is determined by hh3cifPpsUniSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifMulSuppression		1.3.6.1.4.1.25506.8.35.1.1.1.20
The multicast suppression with ranging from 0 to 100 percent in ratio mode. The step is determined by hh3cifMulSuppressionStep.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifPpsMulSuppression		1.3.6.1.4.1.25506.8.35.1.1.1.21
The multicast suppression in pps(packet per second) mode. The max pps value is determined by hh3cifPpsMulSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifComboActivePort		1.3.6.1.4.1.25506.8.35.1.1.1.22
Active port on combo interface.
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	fiber(1), copper(2), na(3)

hh3cifBMbpsMulSuppressionMax		1.3.6.1.4.1.25506.8.35.1.1.1.23
The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifBMbpsMulSuppression		1.3.6.1.4.1.25506.8.35.1.1.1.24
With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hh3cifBMbpsMulSuppressionMax in the entry. The default value of hh3cifBMbpsMulSuppression is the value of hh3cifBMbpsMulSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifBKbpsMulSuppressionMax		1.3.6.1.4.1.25506.8.35.1.1.1.25
The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifBKbpsMulSuppressionStep		1.3.6.1.4.1.25506.8.35.1.1.1.26
The step of multicast suppression with bandwidth-based(Kbps).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifBKbpsMulSuppression		1.3.6.1.4.1.25506.8.35.1.1.1.27
With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hh3cifBKbpsMulSuppressionMax in the entry. The value of hh3cifBKbpsMulSuppression must be multiple of the value of hh3cifBKbpsMulSuppressionStep. The default value of hh3cifBKbpsMulSuppression is the value of hh3cifBKbpsMulSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifUnknownPacketDropMul		1.3.6.1.4.1.25506.8.35.1.1.1.28
Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions.
Status: current	Access: read-write
OBJECT-TYPE
	DropDirection

hh3cifUnknownPacketDropUni		1.3.6.1.4.1.25506.8.35.1.1.1.29
Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions.
Status: current	Access: read-write
OBJECT-TYPE
	DropDirection

hh3cifBMbpsUniSuppressionMax		1.3.6.1.4.1.25506.8.35.1.1.1.30
The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifBMbpsUniSuppression		1.3.6.1.4.1.25506.8.35.1.1.1.31
With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hh3cifBMbpsUniSuppressionMax in the entry. The default value of hh3cifBMbpsUniSuppression is the value of hh3cifBMbpsUniSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifBKbpsUniSuppressionMax		1.3.6.1.4.1.25506.8.35.1.1.1.32
The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifBKbpsUniSuppressionStep		1.3.6.1.4.1.25506.8.35.1.1.1.33
The step of unicast suppression with bandwidth-based(Kbps).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifBKbpsUniSuppression		1.3.6.1.4.1.25506.8.35.1.1.1.34
With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hh3cifBKbpsUniSuppressionMax in the entry. The value of hh3cifBKbpsUniSuppression must be multiple of the value of hh3cifBKbpsUniSuppressionStep. The default value of hh3cifBKbpsUniSuppression is the value of hh3cifBKbpsUniSuppressionMax.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifOutPayloadOctets		1.3.6.1.4.1.25506.8.35.1.1.1.35
The actual output octets of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifInPayloadOctets		1.3.6.1.4.1.25506.8.35.1.1.1.36
The actual input octets of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifInErrorPktsRate		1.3.6.1.4.1.25506.8.35.1.1.1.37
The rate of inbound error packets on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifInPkts		1.3.6.1.4.1.25506.8.35.1.1.1.38
The number of packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifInNormalPkts		1.3.6.1.4.1.25506.8.35.1.1.1.39
The number of normal packets received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifOutPkts		1.3.6.1.4.1.25506.8.35.1.1.1.40
The number of packets sent on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifAggregateTable		1.3.6.1.4.1.25506.8.35.1.2
Port aggregation information table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cIfAggregateEntry

hh3cifAggregateEntry		1.3.6.1.4.1.25506.8.35.1.2.1
Port aggregation information table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cIfAggregateEntry

hh3cifAggregatePortIndex		1.3.6.1.4.1.25506.8.35.1.2.1.1
Index number of the main aggregated port.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

hh3cifAggregatePortName		1.3.6.1.4.1.25506.8.35.1.2.1.2
Aggregation group name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..40)

hh3cifAggregatePortListPorts		1.3.6.1.4.1.25506.8.35.1.2.1.3
Portlist of a aggregating.
Status: current	Access: read-write
OBJECT-TYPE
	PortList

hh3cifAggregateModel		1.3.6.1.4.1.25506.8.35.1.2.1.4
Load sharing mode for the port aggregation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ingress(1), both(2), round-robin(3)

hh3cifAggregateOperStatus		1.3.6.1.4.1.25506.8.35.1.2.1.5
Current operation status of the row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cifHybridPortTable		1.3.6.1.4.1.25506.8.35.1.3
Hybrid-port configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cifHybridPortEntry

hh3cifHybridPortEntry		1.3.6.1.4.1.25506.8.35.1.3.1
Hybrid-port configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cifHybridPortEntry

hh3cifHybridPortIndex		1.3.6.1.4.1.25506.8.35.1.3.1.1
Index number of Hybrid-port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hh3cifHybridTaggedVlanListLow		1.3.6.1.4.1.25506.8.35.1.3.1.2
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cifHybridTaggedVlanListHigh		1.3.6.1.4.1.25506.8.35.1.3.1.3
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cifHybridUnTaggedVlanListLow		1.3.6.1.4.1.25506.8.35.1.3.1.4
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cifHybridUnTaggedVlanListHigh		1.3.6.1.4.1.25506.8.35.1.3.1.5
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cifComboPortTable		1.3.6.1.4.1.25506.8.35.1.4
Combo-port table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cifComboPortEntry

hh3cifComboPortEntry		1.3.6.1.4.1.25506.8.35.1.4.1
The entry of hh3cifComboPortTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cifComboPortEntry

hh3cifComboPortIndex		1.3.6.1.4.1.25506.8.35.1.4.1.1
The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

hh3cifComboPortCurActive		1.3.6.1.4.1.25506.8.35.1.4.1.2
Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	fiber(1), copper(2), na(3)

hh3cifPktBufTable		1.3.6.1.4.1.25506.8.35.1.5
Packet buffer table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cifPktBufEntry

hh3cifPktBufEntry		1.3.6.1.4.1.25506.8.35.1.5.1
The entry of hh3cifPktBufTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cifPktBufEntry

hh3cifPktBufFree		1.3.6.1.4.1.25506.8.35.1.5.1.1
The number of packet buffers available for the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifPktBufInit		1.3.6.1.4.1.25506.8.35.1.5.1.2
The number of packet buffers allocated when the interface was created.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifPktBufMin		1.3.6.1.4.1.25506.8.35.1.5.1.3
The smallest number of packet buffers available for the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifPktBufMiss		1.3.6.1.4.1.25506.8.35.1.5.1.4
The number of times that the interface failed to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cLswL2InfMibObject		1.3.6.1.4.1.25506.8.35.5.1
OBJECT IDENTIFIER

hh3cSlotPortMax		1.3.6.1.4.1.25506.8.35.5.1.1
Max ports of the slots.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hh3cSwitchPortMax		1.3.6.1.4.1.25506.8.35.5.1.2
Max ports that this switch includes.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

hh3cifVLANTrunkStatusTable		1.3.6.1.4.1.25506.8.35.5.1.3
Gvrp attributes on the VlanTrunk port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cIfVLANTrunkStatusEntry

hh3cifVLANTrunkStatusEntry		1.3.6.1.4.1.25506.8.35.5.1.3.1
Gvrp attributes on the VlanTrunk port.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cIfVLANTrunkStatusEntry

hh3cifVLANTrunkIndex		1.3.6.1.4.1.25506.8.35.5.1.3.1.1
Index number of the VLANTrunk interface.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

hh3cifVLANTrunkGvrpRegistration		1.3.6.1.4.1.25506.8.35.5.1.3.1.2
GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), fixed(2), forbidden(3)

hh3cifVLANTrunkPassListLow		1.3.6.1.4.1.25506.8.35.5.1.3.1.4
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hh3cifVLANTrunkPassListHigh		1.3.6.1.4.1.25506.8.35.5.1.3.1.5
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hh3cifVLANTrunkAllowListLow		1.3.6.1.4.1.25506.8.35.5.1.3.1.6
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hh3cifVLANTrunkAllowListHigh		1.3.6.1.4.1.25506.8.35.5.1.3.1.7
Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hh3cethernetTable		1.3.6.1.4.1.25506.8.35.5.1.4
Ethernet port attribute table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cEthernetEntry

hh3cethernetEntry		1.3.6.1.4.1.25506.8.35.5.1.4.1
Entries of Ethernet port attribute table
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cEthernetEntry

hh3cifEthernetDuplex		1.3.6.1.4.1.25506.8.35.5.1.4.1.3
Ethernet interface mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	full(1), half(2), auto(3)

hh3cifEthernetMTU		1.3.6.1.4.1.25506.8.35.5.1.4.1.4
MTU on the Ethernet interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

hh3cifEthernetSpeed		1.3.6.1.4.1.25506.8.35.5.1.4.1.5
Ethernet interface speed.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	auto(0), s10M(10), s100M(100), s1000M(1000), s10000M(10000), s24000M(24000), s40000M(40000), s100000M(100000)

hh3cifEthernetMdi		1.3.6.1.4.1.25506.8.35.5.1.4.1.7
Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mdi-ii(1), mdi-x(2), mdi-auto(3)

hh3cMaxMacLearn		1.3.6.1.4.1.25506.8.35.5.1.4.1.8
The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-1..2147483647

hh3cifMacAddressLearn		1.3.6.1.4.1.25506.8.35.5.1.4.1.9
This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hh3cifEthernetTest		1.3.6.1.4.1.25506.8.35.5.1.4.1.10
Test this interface. The actual testing will be different according to products. Read operation not supported.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	test(1)

hh3cifMacAddrLearnMode		1.3.6.1.4.1.25506.8.35.5.1.4.1.11
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	iVL(1), sVL(2)

hh3cifEthernetFlowInterval		1.3.6.1.4.1.25506.8.35.5.1.4.1.12
Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..300

hh3cifEthernetIsolate		1.3.6.1.4.1.25506.8.35.5.1.4.1.13
Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

hh3cifVlanVPNStatus		1.3.6.1.4.1.25506.8.35.5.1.4.1.14
Vlan VPN enable status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hh3cifVlanVPNUplinkStatus		1.3.6.1.4.1.25506.8.35.5.1.4.1.15
Vlan VPN uplink status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hh3cifVlanVPNTPID		1.3.6.1.4.1.25506.8.35.5.1.4.1.16
Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hh3cVlanVPNTPIDMode to get more information.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

hh3cifIsolateGroupID		1.3.6.1.4.1.25506.8.35.5.1.4.1.17
Isolate group identifier. Value zero means this interface does not belong to any isolate group.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cifisUplinkPort		1.3.6.1.4.1.25506.8.35.5.1.4.1.18
Ethernet uplink status, default value is 2.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

hh3cifEthernetAutoSpeedMask		1.3.6.1.4.1.25506.8.35.5.1.4.1.19
This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0.
Status: current	Access: read-only
OBJECT-TYPE
	SpeedModeFlag

hh3cifEthernetAutoSpeed		1.3.6.1.4.1.25506.8.35.5.1.4.1.20
This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hh3cifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hh3cifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hh3cifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hh3cifEthernetAutoSpeedMask.
Status: current	Access: read-write
OBJECT-TYPE
	SpeedModeFlag

hh3cIsolateGroupMax		1.3.6.1.4.1.25506.8.35.5.1.5
Max isolate group that this device support, the value is zero means that the device does not support isolate group.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cGlobalBroadcastMaxPps		1.3.6.1.4.1.25506.8.35.5.1.6
The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..14881000

hh3cGlobalBroadcastMaxRatio		1.3.6.1.4.1.25506.8.35.5.1.7
The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

hh3cBpduTunnelStatus		1.3.6.1.4.1.25506.8.35.5.1.8
Bpdu tunnel enable status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hh3cVlanVPNTPIDMode		1.3.6.1.4.1.25506.8.35.5.1.9
Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hh3cifVlanVPNTPID. In this situation, hh3cVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hh3cVlanVPNTPID. In this situation, hh3cifVlanVPNTPID in hh3cethernetTable has the same value with hh3cVlanVPNTPID.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	port-based(1), global(2)

hh3cVlanVPNTPID		1.3.6.1.4.1.25506.8.35.5.1.10
Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

hh3cPortIsolateGroupTable		1.3.6.1.4.1.25506.8.35.5.1.11
Isolate Group attribute table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cPortIsolateGroupEntry

hh3cPortIsolateGroupEntry		1.3.6.1.4.1.25506.8.35.5.1.11.1
The entry of hh3cPortIsolateGroupTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cPortIsolateGroupEntry

hh3cPortIsolateGroupIndex		1.3.6.1.4.1.25506.8.35.5.1.11.1.1
Port isolate group identifier. The index of the hh3cPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hh3cPortIsolateUplinkIfIndex		1.3.6.1.4.1.25506.8.35.5.1.11.1.2
Index number of the uplink interface.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndex

hh3cPortIsolateGroupRowStatus		1.3.6.1.4.1.25506.8.35.5.1.11.1.3
Current operation status of the row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hh3cPortIsolateGroupDescription		1.3.6.1.4.1.25506.8.35.5.1.11.1.4
Port isolate group description, default value is zero-length string.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..80)

hh3cMaxMacLearnRange		1.3.6.1.4.1.25506.8.35.5.1.12
The maximum number of MAC address that the port supports.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cifPortProtocolStatTable		1.3.6.1.4.1.25506.8.35.5.1.13
This table contains objects of port statistics information based on IPv4 and IPv6 protocols.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cifPortProtocolStatEntry

hh3cifPortProtocolStatEntry		1.3.6.1.4.1.25506.8.35.5.1.13.1
The entry of hh3cifPortProtocolStatTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cifPortProtocolStatEntry

hh3cifIPv4InOctets		1.3.6.1.4.1.25506.8.35.5.1.13.1.1
Number of octets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4InUcastPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.2
Number of unicast packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4InMultiPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.3
Number of multicast packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4InBroadcastPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.4
Number of broadcast packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4InDiscards		1.3.6.1.4.1.25506.8.35.5.1.13.1.5
Number of discard packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4InErrors		1.3.6.1.4.1.25506.8.35.5.1.13.1.6
Number of error packets based on IPv4 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4OutOctets		1.3.6.1.4.1.25506.8.35.5.1.13.1.7
Number of octets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4OutUcastPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.8
Number of unicast packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4OutMultiPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.9
Number of multicast packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4OutBroadcastPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.10
Number of broadcast packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4OutDiscards		1.3.6.1.4.1.25506.8.35.5.1.13.1.11
Number of discard packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv4OutErrors		1.3.6.1.4.1.25506.8.35.5.1.13.1.12
Number of error packets based on IPv4 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6InOctets		1.3.6.1.4.1.25506.8.35.5.1.13.1.13
Number of octets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6InUcastPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.14
Number of unicast packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6InMultiPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.15
Number of multicast packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6InAnycastPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.16
Number of anycast packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6InDiscards		1.3.6.1.4.1.25506.8.35.5.1.13.1.17
Number of discard packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6InErrors		1.3.6.1.4.1.25506.8.35.5.1.13.1.18
Number of error packets based on IPv6 received on the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6OutOctets		1.3.6.1.4.1.25506.8.35.5.1.13.1.19
Number of octets based on IPv6 transmitted of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6OutUcastPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.20
Number of unicast packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6OutMultiPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.21
Number of multicast packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6OutAnycastPkts		1.3.6.1.4.1.25506.8.35.5.1.13.1.22
Number of anycast packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6OutDiscards		1.3.6.1.4.1.25506.8.35.5.1.13.1.23
Number of discard packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

hh3cifIPv6OutErrors		1.3.6.1.4.1.25506.8.35.5.1.13.1.24
Number of error packets based on IPv6 transmitted out of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64