HH3C-LOGIC-VOLUME-MIB

File: HH3C-LOGIC-VOLUME-MIB.mib (29283 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
ENTITY-MIB HH3C-STORAGE-REF-MIB

Imported symbols

Counter32 Integer32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE RowStatus
DateAndTime TEXTUAL-CONVENTION TruthValue
InetAddressType InetAddress entPhysicalIndex
Hh3cLvIDType Hh3cStorageEnableState Hh3cStorageActionType
Hh3cStorageLedStateType Hh3cSessionIDType Hh3cRaidIDType
Hh3cWwpnListType hh3cStorageRef

Defined Types

Hh3cLvEntry  
SEQUENCE    
  hh3cLvIndex Hh3cLvIDType
  hh3cLvName OCTET STRING
  hh3cLvTotalSize Integer32
  hh3cLvCreateRaidUuid Hh3cRaidIDType
  hh3cLvCreateRaidSize Integer32
  hh3cLvSedInquiryStringKeep TruthValue
  hh3cLvSedRaidUuid Hh3cRaidIDType
  hh3cLvState INTEGER
  hh3cLvAssigned INTEGER
  hh3cLvType INTEGER
  hh3cLvExtendTimes Integer32
  hh3cLvRowStatus RowStatus

Hh3cLvExtEntry  
SEQUENCE    
  hh3cLvRaidUuid Hh3cRaidIDType
  hh3cLvExtSize Integer32
  hh3cLvRaidSize Integer32
  hh3cLvExtRowStatus RowStatus

Hh3cTargetEntry  
SEQUENCE    
  hh3cTargetId Integer32
  hh3cTargetName OCTET STRING
  hh3cTargetMinLun Integer32
  hh3cTargetRowStatus RowStatus

Hh3cTargetAddressEntry  
SEQUENCE    
  hh3cTargetIpAddress InetAddress
  hh3cTargetIpAddrType InetAddressType
  hh3cTargetIpRowStatus RowStatus

Hh3cTargetLvAssignEntry  
SEQUENCE    
  hh3cTargetLvLun Integer32
  hh3cTargetLvRowStatus RowStatus

Hh3cInitiatorEntry  
SEQUENCE    
  hh3cInitiatorId Integer32
  hh3cInitiatorName OCTET STRING
  hh3cInitiatorRowStatus RowStatus

Hh3cTargetInitiatorAssociateEntry  
SEQUENCE    
  hh3cTIAccessMode INTEGER
  hh3cTIChap Hh3cStorageEnableState
  hh3cTIUserName OCTET STRING
  hh3cTIPassword OCTET STRING
  hh3cTIRowStatus RowStatus

Hh3cTISessionEntry  
SEQUENCE    
  hh3cTISessionId Hh3cSessionIDType
  hh3cTISessionConnectionCount Counter32
  hh3cTISessionInitiatorName OCTET STRING

Hh3cSanClientEntry  
SEQUENCE    
  hh3cSanClientId Integer32
  hh3cSanClientName OCTET STRING
  hh3cSanClientType INTEGER
  hh3cFcInitiatorWwpnList Hh3cWwpnListType
  hh3cFcAccessMode INTEGER
  hh3cSanClientRowStatus RowStatus

Hh3cFcLogicResourceEntry  
SEQUENCE    
  hh3cFcLvLun Integer32
  hh3cFcTargetWwpnName Hh3cWwpnListType
  hh3cFcInitiatorWwpnName Hh3cWwpnListType
  hh3cFcLvRowStatus RowStatus

Defined Values

hh3cLogicVolume 1.3.6.1.4.1.25506.10.5
This MIB describes the general information of disk device.
MODULE-IDENTITY    

hh3cLvMibObjects 1.3.6.1.4.1.25506.10.5.1
OBJECT IDENTIFIER    

hh3cLogicResourceCapacityObject 1.3.6.1.4.1.25506.10.5.1.1
OBJECT IDENTIFIER    

hh3cLvCount 1.3.6.1.4.1.25506.10.5.1.1.1
This object identifies the maximal number of logic volumes supported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cLvMaxSize 1.3.6.1.4.1.25506.10.5.1.1.2
This object identifies the maximal size of logic volumes supported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cTargetCount 1.3.6.1.4.1.25506.10.5.1.1.3
This object identifies the maximal number of targets supported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cInitiatorCount 1.3.6.1.4.1.25506.10.5.1.1.4
This object identifies the maximal number of initiators supported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cSanClientCount 1.3.6.1.4.1.25506.10.5.1.1.5
This object identifies the maximal number of SAN client supported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cLogicVolumeResource 1.3.6.1.4.1.25506.10.5.1.2
OBJECT IDENTIFIER    

hh3cLvCreateIndex 1.3.6.1.4.1.25506.10.5.1.2.1
This object supplys an valid index which uses to create a new entry for the hh3cLvTable object. Reference to hh3cLvRowStatus object for more information. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cLvIDType  

hh3cLvTable 1.3.6.1.4.1.25506.10.5.1.2.2
This table describes the logic resource information of a logic volume.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cLvEntry

hh3cLvEntry 1.3.6.1.4.1.25506.10.5.1.2.2.1
An entry containing management information applicable to a particular logic resource.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cLvEntry  

hh3cLvIndex 1.3.6.1.4.1.25506.10.5.1.2.2.1.1
This object describes the symbol of a logic volume.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cLvIDType  

hh3cLvName 1.3.6.1.4.1.25506.10.5.1.2.2.1.2
This object identifies the name of a logic volume.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hh3cLvTotalSize 1.3.6.1.4.1.25506.10.5.1.2.2.1.3
This object describes the total size of a logic volume. The units is million bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cLvCreateRaidUuid 1.3.6.1.4.1.25506.10.5.1.2.2.1.4
This object describes the ID of array where a logic volume build on.
Status: current Access: read-create
OBJECT-TYPE    
  Hh3cRaidIDType  

hh3cLvCreateRaidSize 1.3.6.1.4.1.25506.10.5.1.2.2.1.5
This object describes the size of a logic volume when create it. The units is million bytes.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hh3cLvSedInquiryStringKeep 1.3.6.1.4.1.25506.10.5.1.2.2.1.6
This object identifies if the inquiry string of the logic volume should be reserved. This value of this object is valid only when the associated hh3cLvType is equal to 'serviceEnabled'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hh3cLvSedRaidUuid 1.3.6.1.4.1.25506.10.5.1.2.2.1.7
This object describes the location where the SED infomation is build on.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cRaidIDType  

hh3cLvState 1.3.6.1.4.1.25506.10.5.1.2.2.1.8
This object identifies the state of a logic volume. The value 'conflict' means the names of two or more logic volume are reduplicate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER usable(1), unusable(2), conflict(3)  

hh3cLvAssigned 1.3.6.1.4.1.25506.10.5.1.2.2.1.9
This object identifies if the logic volume has be designated for target or SAN client.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER use(1), unused(2)  

hh3cLvType 1.3.6.1.4.1.25506.10.5.1.2.2.1.10
This object describes the type of a logic volume. The value 'virtual' means virtual devices are defined as sets of storage blocks from one or more physical array. This allows the creation of virtual devices that can be a portion of a larger physical array, or an aggregation of multiple physical array. The value 'direct' means direct devices are directly mapped SCSI devices. Because they are not virtualized, direct devices cannot take advantage of advanced storage options, such as mirroring, failover, replication, or snapshot copy. The value 'serviceEnabled' means service enabled devices are all maintained in a one-to-one mapping relationship(one physical array equals one logical device).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER virtual(1), direct(2), serviceEnabled(3)  

hh3cLvExtendTimes 1.3.6.1.4.1.25506.10.5.1.2.2.1.11
This object describes the times the logic volume has been extended.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cLvRowStatus 1.3.6.1.4.1.25506.10.5.1.2.2.1.12
This object describes the actions to create or delete a logic volume.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cLvExtTable 1.3.6.1.4.1.25506.10.5.1.3
This table contains the extend resource information of the logic volume.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cLvExtEntry

hh3cLvExtEntry 1.3.6.1.4.1.25506.10.5.1.3.1
An entry containing management information applicable to extend resource of logic volume.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cLvExtEntry  

hh3cLvRaidUuid 1.3.6.1.4.1.25506.10.5.1.3.1.1
This index is identical to hh3cRaidUuid in HH3C-RAID-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cRaidIDType  

hh3cLvExtSize 1.3.6.1.4.1.25506.10.5.1.3.1.2
This object describes the extend size of the logic volume in a specific raid. The units is million bytes. This object will always return zero when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..2147483647  

hh3cLvRaidSize 1.3.6.1.4.1.25506.10.5.1.3.1.3
This object describes the size of logic volume on the specific raid. The units is million bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cLvExtRowStatus 1.3.6.1.4.1.25506.10.5.1.3.1.4
This object describes the action to extend the logic volume.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cTargetResource 1.3.6.1.4.1.25506.10.5.1.4
OBJECT IDENTIFIER    

hh3cTargetCreateIndex 1.3.6.1.4.1.25506.10.5.1.4.1
This object supplys an valid index which uses to create a new entry for the hh3cTargetTable object. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cTargetTable 1.3.6.1.4.1.25506.10.5.1.4.2
This table describes some information when creating a target.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cTargetEntry

hh3cTargetEntry 1.3.6.1.4.1.25506.10.5.1.4.2.1
An entry containing management information applicable to a target when create it.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cTargetEntry  

hh3cTargetId 1.3.6.1.4.1.25506.10.5.1.4.2.1.1
This object identifies the ID of a target.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cTargetName 1.3.6.1.4.1.25506.10.5.1.4.2.1.2
This object describes the name of a target.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..223)  

hh3cTargetMinLun 1.3.6.1.4.1.25506.10.5.1.4.2.1.3
This object describes the mini LUN(logical unit number) number of a target.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..127  

hh3cTargetRowStatus 1.3.6.1.4.1.25506.10.5.1.4.2.1.4
This object describes the actions to add or delete the target.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cTargetAddressTable 1.3.6.1.4.1.25506.10.5.1.5
This table described some address information of a target.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cTargetAddressEntry

hh3cTargetAddressEntry 1.3.6.1.4.1.25506.10.5.1.5.1
An entry containing management information applicable to the address of a target.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cTargetAddressEntry  

hh3cTargetIpAddress 1.3.6.1.4.1.25506.10.5.1.5.1.1
This object describes the IP address of a target.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

hh3cTargetIpAddrType 1.3.6.1.4.1.25506.10.5.1.5.1.2
This object describes the type of IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

hh3cTargetIpRowStatus 1.3.6.1.4.1.25506.10.5.1.5.1.3
This object describes the actions to add or delete a IP address of a target.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cTargetLvAssignTable 1.3.6.1.4.1.25506.10.5.1.6
This table describes logic resource information of a target.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cTargetLvAssignEntry

hh3cTargetLvAssignEntry 1.3.6.1.4.1.25506.10.5.1.6.1
An entry containing management information applicable to the logic resource of a target.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cTargetLvAssignEntry  

hh3cTargetLvLun 1.3.6.1.4.1.25506.10.5.1.6.1.1
This object identifies the init LUN number of a target.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..127  

hh3cTargetLvRowStatus 1.3.6.1.4.1.25506.10.5.1.6.1.2
This object describes the actions to add or delete the logic resource of a target.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cInitiatorResource 1.3.6.1.4.1.25506.10.5.1.7
OBJECT IDENTIFIER    

hh3cInitiatorCreateIndex 1.3.6.1.4.1.25506.10.5.1.7.1
This object supplys an valid index which uses to create a new entry for the hh3cInitiatorTable object. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cInitiatorTable 1.3.6.1.4.1.25506.10.5.1.7.2
This table describes the creation information of initiators.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cInitiatorEntry

hh3cInitiatorEntry 1.3.6.1.4.1.25506.10.5.1.7.2.1
An entry containing management information applicable to the creation of initiator.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cInitiatorEntry  

hh3cInitiatorId 1.3.6.1.4.1.25506.10.5.1.7.2.1.1
This object identifies the ID of the initiator.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cInitiatorName 1.3.6.1.4.1.25506.10.5.1.7.2.1.2
This object describes the name of the initiator.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..223)  

hh3cInitiatorRowStatus 1.3.6.1.4.1.25506.10.5.1.7.2.1.3
This object describes the actions to add or delete initiators.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cTargetInitiatorAssociateTable 1.3.6.1.4.1.25506.10.5.1.8
This table describes the associate information between the target and initiator.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cTargetInitiatorAssociateEntry

hh3cTargetInitiatorAssociateEntry 1.3.6.1.4.1.25506.10.5.1.8.1
An entry containing management information applicable to association between the target and initiator.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cTargetInitiatorAssociateEntry  

hh3cTIAccessMode 1.3.6.1.4.1.25506.10.5.1.8.1.1
This object identifies the mode of accessing between the target and initiator. The value 'read' means read available. The value 'write' means read/write available, and write available only for one association. The value 'nonexclusive' means read/write available for multi-association.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER read(1), write(2), nonexclusive(3)  

hh3cTIChap 1.3.6.1.4.1.25506.10.5.1.8.1.2
This object identifies the state of the chap attestation.
Status: current Access: read-create
OBJECT-TYPE    
  Hh3cStorageEnableState  

hh3cTIUserName 1.3.6.1.4.1.25506.10.5.1.8.1.3
This object identifies the user name for the chap attestation.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

hh3cTIPassword 1.3.6.1.4.1.25506.10.5.1.8.1.4
This object identifies the password for the chap attestation. It is proclaimed and can be modified.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(12..16)  

hh3cTIRowStatus 1.3.6.1.4.1.25506.10.5.1.8.1.5
This object describes the actions to add or delete the association.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cTISessionTable 1.3.6.1.4.1.25506.10.5.1.9
This table described the information of the sessions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cTISessionEntry

hh3cTISessionEntry 1.3.6.1.4.1.25506.10.5.1.9.1
An entry containing management information applicable to the sessions.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cTISessionEntry  

hh3cTISessionId 1.3.6.1.4.1.25506.10.5.1.9.1.1
This object identifies the ID of a session.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cSessionIDType  

hh3cTISessionConnectionCount 1.3.6.1.4.1.25506.10.5.1.9.1.2
This object describes the number of connections between the targets and initiators.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cTISessionInitiatorName 1.3.6.1.4.1.25506.10.5.1.9.1.3
This object identifies the initiator's name of a session.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..223)  

hh3cSanClientResource 1.3.6.1.4.1.25506.10.5.1.10
OBJECT IDENTIFIER    

hh3cSanClientCreateIndex 1.3.6.1.4.1.25506.10.5.1.10.1
This object supplys an valid index which uses to create a new entry for the hh3cSanClientTable object. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cSanClientTable 1.3.6.1.4.1.25506.10.5.1.10.2
This table described the information of SAN(Storage Area Network) clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cSanClientEntry

hh3cSanClientEntry 1.3.6.1.4.1.25506.10.5.1.10.2.1
An entry containing management information applicable to the SAN clients.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cSanClientEntry  

hh3cSanClientId 1.3.6.1.4.1.25506.10.5.1.10.2.1.1
This object identifies the index of a SAN client.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cSanClientName 1.3.6.1.4.1.25506.10.5.1.10.2.1.2
This object identifies the name of a SAN client.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

hh3cSanClientType 1.3.6.1.4.1.25506.10.5.1.10.2.1.3
This object identifies the type of a SAN client.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER iscsi(1), fc(2)  

hh3cFcInitiatorWwpnList 1.3.6.1.4.1.25506.10.5.1.10.2.1.4
This object identifies the name list of FC Initiator WWPN(World Wide Port Name). The value of this object is invalid and should be ignored when the value of associated hh3cSanClientType object is not equal to 'fc'.
Status: current Access: read-create
OBJECT-TYPE    
  Hh3cWwpnListType  

hh3cFcAccessMode 1.3.6.1.4.1.25506.10.5.1.10.2.1.6
This object identifies the mode of access. The value of this object is invalid and should be ignored when the value of associated hh3cSanClientType object is not equal to 'fc'. The value 'read' means read available. The value 'write' means read/write available, and write available only for one association. The value 'nonexclusive' means read/write available for multi-association.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER read(1), write(2), nonexclusive(3)  

hh3cSanClientRowStatus 1.3.6.1.4.1.25506.10.5.1.10.2.1.7
This object describes the action to create or delete a SAN client.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cFcLogicResourceTable 1.3.6.1.4.1.25506.10.5.1.11
This table describes logic resource information of a FC.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cFcLogicResourceEntry

hh3cFcLogicResourceEntry 1.3.6.1.4.1.25506.10.5.1.11.1
An entry containing management information applicable to the logic resource of a FC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cFcLogicResourceEntry  

hh3cFcLvLun 1.3.6.1.4.1.25506.10.5.1.11.1.1
This object identifies the init LUN number of a FC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..127  

hh3cFcTargetWwpnName 1.3.6.1.4.1.25506.10.5.1.11.1.2
This object identifies the name list of FC Target WWPN(World Wide Port Name).
Status: current Access: read-create
OBJECT-TYPE    
  Hh3cWwpnListType  

hh3cFcInitiatorWwpnName 1.3.6.1.4.1.25506.10.5.1.11.1.3
This object identifies the name list of FC Initiator WWPN(World Wide Port Name).
Status: current Access: read-create
OBJECT-TYPE    
  Hh3cWwpnListType  

hh3cFcLvRowStatus 1.3.6.1.4.1.25506.10.5.1.11.1.4
This object describes the actions to add or delete the logic resource of a FC.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus