Hh3cDot3OamEntry |
|
SEQUENCE |
|
|
|
|
hh3cDot3OamAdminState |
INTEGER |
|
|
hh3cDot3OamOperStatus |
INTEGER |
|
|
hh3cDot3OamMode |
INTEGER |
|
|
hh3cDot3OamMaxOamPduSize |
Integer32 |
|
|
hh3cDot3OamConfigRevision |
Unsigned32 |
|
|
hh3cDot3OamFunctionsSupported |
BITS |
|
Hh3cDot3OamPeerEntry |
|
SEQUENCE |
|
|
|
|
hh3cDot3OamPeerStatus |
INTEGER |
|
|
hh3cDot3OamPeerMacAddress |
MacAddress |
|
|
hh3cDot3OamPeerVendorOui |
Dot3Oui |
|
|
hh3cDot3OamPeerVendorInfo |
Unsigned32 |
|
|
hh3cDot3OamPeerMode |
INTEGER |
|
|
hh3cDot3OamPeerMaxOamPduSize |
Integer32 |
|
|
hh3cDot3OamPeerConfigRevision |
Unsigned32 |
|
|
hh3cDot3OamPeerFunctionsSupported |
BITS |
|
Hh3cDot3OamLoopbackEntry |
|
SEQUENCE |
|
|
|
|
hh3cDot3OamLoopbackCommand |
INTEGER |
|
|
hh3cDot3OamLoopbackStatus |
INTEGER |
|
|
hh3cDot3OamLoopbackIgnoreRx |
INTEGER |
|
Hh3cDot3OamStatsEntry |
|
SEQUENCE |
|
|
|
|
hh3cDot3OamInformationTx |
Counter32 |
|
|
hh3cDot3OamInformationRx |
Counter32 |
|
|
hh3cDot3OamUniqueEventNotificationTx |
Counter32 |
|
|
hh3cDot3OamUniqueEventNotificationRx |
Counter32 |
|
|
hh3cDot3OamDuplicateEventNotificationTx |
Counter32 |
|
|
hh3cDot3OamDuplicateEventNotificationRx |
Counter32 |
|
|
hh3cDot3OamLoopbackControlTx |
Counter32 |
|
|
hh3cDot3OamLoopbackControlRx |
Counter32 |
|
|
hh3cDot3OamVariableRequestTx |
Counter32 |
|
|
hh3cDot3OamVariableRequestRx |
Counter32 |
|
|
hh3cDot3OamVariableResponseTx |
Counter32 |
|
|
hh3cDot3OamVariableResponseRx |
Counter32 |
|
|
hh3cDot3OamOrgSpecificTx |
Counter32 |
|
|
hh3cDot3OamOrgSpecificRx |
Counter32 |
|
|
hh3cDot3OamUnsupportedCodesTx |
Counter32 |
|
|
hh3cDot3OamUnsupportedCodesRx |
Counter32 |
|
|
hh3cDot3OamFramesLostDueToOam |
Counter32 |
|
Hh3cDot3OamEventConfigEntry |
|
SEQUENCE |
|
|
|
|
hh3cDot3OamErrSymPeriodWindowHi |
Unsigned32 |
|
|
hh3cDot3OamErrSymPeriodWindowLo |
Unsigned32 |
|
|
hh3cDot3OamErrSymPeriodThresholdHi |
Unsigned32 |
|
|
hh3cDot3OamErrSymPeriodThresholdLo |
Unsigned32 |
|
|
hh3cDot3OamErrSymPeriodEvNotifEnable |
INTEGER |
|
|
hh3cDot3OamErrFramePeriodWindow |
Unsigned32 |
|
|
hh3cDot3OamErrFramePeriodThreshold |
Unsigned32 |
|
|
hh3cDot3OamErrFramePeriodEvNotifEnable |
INTEGER |
|
|
hh3cDot3OamErrFrameWindow |
Unsigned32 |
|
|
hh3cDot3OamErrFrameThreshold |
Unsigned32 |
|
|
hh3cDot3OamErrFrameEvNotifEnable |
INTEGER |
|
|
hh3cDot3OamErrFrameSecsSummaryWindow |
Integer32 |
|
|
hh3cDot3OamErrFrameSecsSummaryThreshold |
Integer32 |
|
|
hh3cDot3OamErrFrameSecsEvNotifEnable |
INTEGER |
|
Hh3cDot3OamEventLogEntry |
|
SEQUENCE |
|
|
|
|
hh3cDot3OamEventLogIndex |
Unsigned32 |
|
|
hh3cDot3OamEventLogTimestamp |
DateAndTime |
|
|
hh3cDot3OamEventLogOui |
Dot3Oui |
|
|
hh3cDot3OamEventLogType |
Unsigned32 |
|
|
hh3cDot3OamEventLogLocation |
INTEGER |
|
|
hh3cDot3OamEventLogWindowHi |
Unsigned32 |
|
|
hh3cDot3OamEventLogWindowLo |
Unsigned32 |
|
|
hh3cDot3OamEventLogThresholdHi |
Unsigned32 |
|
|
hh3cDot3OamEventLogThresholdLo |
Unsigned32 |
|
|
hh3cDot3OamEventLogValue |
CounterBasedGauge64 |
|
|
hh3cDot3OamEventLogRunningTotal |
CounterBasedGauge64 |
|
|
hh3cDot3OamEventLogEventTotal |
Unsigned32 |
|
hh3cDot3OamEntry |
1.3.6.1.4.1.25506.2.42.3.1.1.1 |
An entry in the table, containing information on the Ethernet
OAM function for a single Ethernet like interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Hh3cDot3OamEntry |
|
|
hh3cDot3OamOperStatus |
1.3.6.1.4.1.25506.2.42.3.1.1.1.2 |
At initialization and failure conditions, two OAM entities on
the same full-duplex Ethernet link begin a discovery phase to
determine what OAM capabilities may be used on that link. The
progress of this initialization is controlled by the OAM
sublayer.
This value is always disabled(1) if OAM is disabled on this
interface via the hh3cDot3OamAdminState.
If the link has detected a fault and is transmitting OAMPDUs
with a link fault indication, the value is linkFault(2).
The passiveWait(3) state is returned only by OAM entities in
passive mode (hh3cDot3OamMode) and reflects the state in which the
OAM entity is waiting to see if the peer device is OAM
capable. The activeSendLocal(4) is used by active mode
devices (hh3cDot3OamMode) and reflects the OAM entity actively
trying to discover whether the peer has OAM capability but has
not yet made that determination.
The state sendLocalAndRemote(5) reflects that the local OAM
entity has discovered the peer but has not yet accepted or
rejected the configuration of the peer. The local device can,
for whatever reason, decide that the peer device is
unacceptable and decline OAM peering. If the local OAM entity
rejects the peer OAM entity, the state becomes
oamPeeringLocallyRejected(7). If the OAM peering is allowed
by the local device, the state moves to
sendLocalAndRemoteOk(6). Note that both the
sendLocalAndRemote(5) and oamPeeringLocallyRejected(7) states
fall within the state SEND_LOCAL_REMOTE of the Discovery state
diagram [802.3ah, Figure 57-5], with the difference being
whether the local OAM client has actively rejected the peering
or has just not indicated any decision yet. Whether a peering
decision has been made is indicated via the local flags field
in the OAMPDU (reflected in the aOAMLocalFlagsField of
30.3.6.1.10).
If the remote OAM entity rejects the peering, the state
becomes oamPeeringRemotelyRejected(8). Note that both the
sendLocalAndRemoteOk(6) and oamPeeringRemotelyRejected(8)
states fall within the state SEND_LOCAL_REMOTE_OK of the
Discovery state diagram [802.3ah, Figure 57-5], with the
difference being whether the remote OAM client has rejected
the peering or has just not yet decided. This is indicated
via the remote flags field in the OAM PDU (reflected in the
aOAMRemoteFlagsField of 30.3.6.1.11).
When the local OAM entity learns that both it and the remote
OAM entity have accepted the peering, the state moves to
operational(9) corresponding to the SEND_ANY state of the
Discovery state diagram [802.3ah, Figure 57-5]. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), linkfault(2), passiveWait(3), activeSendLocal(4), sendLocalAndRemote(5), sendLocalAndRemoteOk(6), oamPeeringLocallyRejected(7), oamPeeringRemotelyRejected(8), operational(9) |
|
hh3cDot3OamPeerEntry |
1.3.6.1.4.1.25506.2.42.3.1.2.1 |
An entry in the table, containing information on the peer OAM
entity for a single Ethernet like interface.
Note that there is at most one OAM peer for each Ethernet like
interface. There is exactly one row in this table for each
Ethernet like interface supporting OAM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Hh3cDot3OamPeerEntry |
|
|
hh3cDot3OamLoopbackEntry |
1.3.6.1.4.1.25506.2.42.3.1.3.1 |
An entry in the table, containing information on the loopback
status for a single Ethernet like interface. There is an
entry in this table for every Ethernet like interface on which
supports OAM and loopback function within OAM (as indicated in
hh3cDot3OamFunctionsSupported). |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Hh3cDot3OamLoopbackEntry |
|
|
hh3cDot3OamLoopbackStatus |
1.3.6.1.4.1.25506.2.42.3.1.3.1.2 |
The loopback status of the OAM entity. This status is
determined by a combination of the local parser and
multiplexer states, the remote parser and multiplexer states,
as well as by the actions of the local OAM client. When
operating in normal mode with no loopback in progress, the
status reads noLoopback(1).
If the OAM client has sent an Loopback OAMPDU and is waiting
for a response, where the local parser and multiplexer states
are DISCARD (see [802.3ah, 57.2.11.1]), the status is
'initiatingLoopback'. In this case, the local OAM entity has
yet to receive any acknowledgement that the remote OAM entity
has received its loopback command request.
If the local OAM client knows that the remote OAM entity is in
loopback mode (via the remote state information as described
in [802.3ah, 57.2.11.1, 30.3.6.1.15]), the status is
remoteLoopback(3). If the local OAM client is in the process
of terminating the remote loopback [802.3ah, 57.2.11.3,
30.3.6.1.14], with its local multiplexer and parser states in
DISCARD, the status is terminatingLoopback(4). If the remote
OAM client has put the local OAM entity in loopback mode as
indicated by its local parser state, the status is
localLoopback(5).
The unknown(6) status indicates the parser and multiplexer
combination is unexpected. This status may be returned if the
OAM loopback is in a transition state but should not persist.
The values of this attribute correspond to the following
values of the local and remote parser and multiplexer states.
value LclPrsr LclMux RmtPrsr RmtMux
noLoopback FWD FWD FWD FWD
initLoopback DISCARD DISCARD FWD FWD
rmtLoopback DISCARD FWD LPBK DISCARD
tmtngLoopback DISCARD DISCARD LPBK DISCARD
lclLoopback LPBK DISCARD DISCARD FWD
unknown *** any other combination ***
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noLoopback(1), initiatingLoopback(2), remoteLoopback(3), terminatingLoopback(4), localLoopback(5), unknown(6) |
|
hh3cDot3OamStatsEntry |
1.3.6.1.4.1.25506.2.42.3.1.4.1 |
An entry in the table, containing statistics information on
the Ethernet OAM function for a single Ethernet like
interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Hh3cDot3OamStatsEntry |
|
|
hh3cDot3OamEventConfigEntry |
1.3.6.1.4.1.25506.2.42.3.1.5.1 |
Event configuration information is available for every
Ethernet like interface that supports OAM and the event
function of OAM as indicated in the hh3cDot3OamFunctionsSupported
attribute.
Event configuration controls when the local management entity
sends Event Notification OAMPDUs to its OAM peer. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Hh3cDot3OamEventConfigEntry |
|
|
hh3cDot3OamEventLogEntry |
1.3.6.1.4.1.25506.2.42.3.1.6.1 |
An entry in the hh3cDot3OamEventLogTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Hh3cDot3OamEventLogEntry |
|
|