H3C-MPLSOAM-MIB

File: H3C-MPLSOAM-MIB.mib (16587 bytes)

Imported modules

HUAWEI-3COM-OID-MIB SNMPv2-SMI SNMPv2-TC

Imported symbols

h3cCommon IpAddress Integer32
Unsigned32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE TruthValue RowStatus
TEXTUAL-CONVENTION

Defined Types

H3cMplsOAMDefectType  
An indication of the OAM's defect type: 1: dServer, server layer defect; 2: dPeerMe, peer network maintenance entity defect; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, receiving excess rate of CV/FFD; 7: dUnknown, unknown defect in the MPLS network.. 8: rlsn down; 9: dLspDown; 10: MPLS OAM ME; 11: no defect.
TEXTUAL-CONVENTION    
  INTEGER dServer(1), dPeerMe(2), dLOCV(3), dTTSIMismatch(4), dTTSIMismerge(5), dExcess(6), dUnknown(7), dRlsnDown(8), dLspDown(9), dME(10), noDefect(11)  

H3cMplsOAMDetectFreq  
An indication of the OAM's frequent type( ITU-T: Y.1711(0402) ): For CV: the frequency is static. The value is 1/s. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms, 100ms, 200ms, 500ms. Any other frequency is wrong. 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: 1000ms(only for cv).
TEXTUAL-CONVENTION    
  INTEGER ffd10ms(1), ffd20ms(2), ffd50ms(3), ffd100ms(4), ffd200ms(5), ffd500ms(6), cv1000ms(7)  

H3cMplsOamIgrEntry  
SEQUENCE    
  h3cMplsOamIgrIndex Unsigned32
  h3cMplsOamIgrLspName OCTET STRING
  h3cMplsOamIgrDetectType INTEGER
  h3cMplsOamIgrDetectFreq H3cMplsOAMDetectFreq
  h3cMplsOamIgrRevType INTEGER
  h3cMplsOamIgrRevLspName OCTET STRING
  h3cMplsOamIgrLspId Integer32
  h3cMplsOamIgrEnable TruthValue
  h3cMplsOamIgrDefectType H3cMplsOAMDefectType
  h3cMplsOamIgrRowStatus RowStatus

H3cMplsOamEgrEntry  
SEQUENCE    
  h3cMplsOamEgrIndex Unsigned32
  h3cMplsOamEgrLspName OCTET STRING
  h3cMplsOamEgrDetectType INTEGER
  h3cMplsOamEgrDetectFreq H3cMplsOAMDetectFreq
  h3cMplsOamEgrRevType INTEGER
  h3cMplsOamEgrRevLspName OCTET STRING
  h3cMplsOamEgrLsrId IpAddress
  h3cMplsOamEgrLspId Integer32
  h3cMplsOamEgrEnable TruthValue
  h3cMplsOamEgrDefectType H3cMplsOAMDefectType
  h3cMplsOamEgrRowStatus RowStatus

Defined Values

h3cMplsOam 1.1.2011.10.2.79
This MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost of network maintenance. The MPLS OAM is used to administrate and maintain MPLS.
MODULE-IDENTITY    

h3cMplsOamScalarGroup 1.1.2011.10.2.79.1
OBJECT IDENTIFIER    

h3cMplsOamCapability 1.1.2011.10.2.79.1.1
Whether OAM is globally capable. false: incapable; true: capable; The default value is incapable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cMplsOamTrapOpen 1.1.2011.10.2.79.1.2
Whether OAM trap is globally enabled. false: disable; true: enable; The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cMplsOamTable 1.1.2011.10.2.79.2
OBJECT IDENTIFIER    

h3cMplsOamIgrTable 1.1.2011.10.2.79.2.1
This table specifies per-LSP MPLS OAM ingress capability and associated information, such as IgrLspName and IgrDetType.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cMplsOamIgrEntry

h3cMplsOamIgrEntry 1.1.2011.10.2.79.2.1.1
An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at ingress.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cMplsOamIgrEntry  

h3cMplsOamIgrIndex 1.1.2011.10.2.79.2.1.1.1
This is an unique index for an OAM ingress entry in the OAM table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

h3cMplsOamIgrLspName 1.1.2011.10.2.79.2.1.1.2
The name of an LSP. It means the LSP name of the detected LSP.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

h3cMplsOamIgrDetectType 1.1.2011.10.2.79.2.1.1.3
There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER cv(1), ffd(2)  

h3cMplsOamIgrDetectFreq 1.1.2011.10.2.79.2.1.1.4
Indication of the OAM's frequent type.
Status: current Access: read-create
OBJECT-TYPE    
  H3cMplsOAMDetectFreq  

h3cMplsOamIgrRevType 1.1.2011.10.2.79.2.1.1.5
When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only by the oam ingress; If shared, the reverse LSP which is shared between many forward LSPs, whose source LSRs are the same and sink LSRs are the same. 1: private; 2: share.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER private(1), share(2)  

h3cMplsOamIgrRevLspName 1.1.2011.10.2.79.2.1.1.6
The object indicates the name of the reverse LSP.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

h3cMplsOamIgrLspId 1.1.2011.10.2.79.2.1.1.7
For ingress, the object indicates the lsp ID of the detected LSP.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

h3cMplsOamIgrEnable 1.1.2011.10.2.79.2.1.1.8
Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the ingress; true: The OAM function is enabled on the ingress.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

h3cMplsOamIgrDefectType 1.1.2011.10.2.79.2.1.1.9
Indication of the OAM's defect type.
Status: current Access: read-only
OBJECT-TYPE    
  H3cMplsOAMDefectType  

h3cMplsOamIgrRowStatus 1.1.2011.10.2.79.2.1.1.10
This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, h3cMplsOamIgrLspName, h3cMplsOamIgrDetectType, h3cMplsOamIgrDetectFreq, h3cMplsOamIgrRevType, h3cMplsOamIgrRevLspName, and h3cMplsOamIgrLspId must be specified.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cMplsOamEgrTable 1.1.2011.10.2.79.2.2
This table specifies per-LSP MPLS OAM capability and associated information, such as DetectType, DetectFrequency.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cMplsOamEgrEntry

h3cMplsOamEgrEntry 1.1.2011.10.2.79.2.2.1
An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at egress.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cMplsOamEgrEntry  

h3cMplsOamEgrIndex 1.1.2011.10.2.79.2.2.1.1
This is a unique index for an OAM egress entry in the OAM table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

h3cMplsOamEgrLspName 1.1.2011.10.2.79.2.2.1.2
The object indicates the name of static LSP at egress.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

h3cMplsOamEgrDetectType 1.1.2011.10.2.79.2.2.1.3
There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER cv(1), ffd(2)  

h3cMplsOamEgrDetectFreq 1.1.2011.10.2.79.2.2.1.4
Indication of the OAM's frequent type.
Status: current Access: read-create
OBJECT-TYPE    
  H3cMplsOAMDetectFreq  

h3cMplsOamEgrRevType 1.1.2011.10.2.79.2.2.1.5
When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only when the only LSP in defect; If shared, the reverse LSP, which is shared between many forward LSPs that have the same source LSRs and sink LSRs. 1: private; 2: share.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER private(1), share(2)  

h3cMplsOamEgrRevLspName 1.1.2011.10.2.79.2.2.1.6
The object indicates the name of a reverse static-lsp.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

h3cMplsOamEgrLsrId 1.1.2011.10.2.79.2.2.1.7
The object indicates the Ingress LSR ID of the LSP.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

h3cMplsOamEgrLspId 1.1.2011.10.2.79.2.2.1.8
The object indicates the the Ingress session lsp ID of the detected static-LSP.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

h3cMplsOamEgrEnable 1.1.2011.10.2.79.2.2.1.9
Whether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the egress; true: The OAM function is enabled on the egress.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

h3cMplsOamEgrDefectType 1.1.2011.10.2.79.2.2.1.10
Indication of the OAM's defect type.
Status: current Access: read-only
OBJECT-TYPE    
  H3cMplsOAMDefectType  

h3cMplsOamEgrRowStatus 1.1.2011.10.2.79.2.2.1.11
This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, h3cMplsOamEgrLspName, h3cMplsOamEgrDetectType, h3cMplsOamEgrDetectFreq, h3cMplsOamEgrRevType, h3cMplsOamEgrRevLspName, h3cMplsOamEgrLsrId and h3cMplsOamEgrLspId must be specified.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cMplsOamNotifications 1.1.2011.10.2.79.3
OBJECT IDENTIFIER    

h3cMplsOamIgrLSPOutDefect 1.1.2011.10.2.79.3.1
This notification is generated when the LSP is found out of the defect state at the LSP ingress.
Status: current Access: read-create
NOTIFICATION-TYPE    

h3cMplsOamIgrLSPInDefect 1.1.2011.10.2.79.3.2
This notification is generated when the LSP is found in the defect state at the LSP ingress.
Status: current Access: read-create
NOTIFICATION-TYPE    

h3cMplsOamEgrLSPOutDefect 1.1.2011.10.2.79.3.3
This notification is generated when the LSP is found out of the defect state at the LSP egress.
Status: current Access: read-create
NOTIFICATION-TYPE    

h3cMplsOamEgrLSPInDefect 1.1.2011.10.2.79.3.4
This notification is generated when the LSP is found in the defect state at the LSP egress.
Status: current Access: read-create
NOTIFICATION-TYPE