H3C-DHCP4-MIB

Imported modules

SNMPv2-TC	SNMPv2-SMI	IF-MIB
INET-ADDRESS-MIB	HUAWEI-3COM-OID-MIB

Imported symbols

TruthValue	RowStatus	MacAddress
OBJECT-TYPE	MODULE-IDENTITY	Integer32
TimeTicks	Counter64	Unsigned32
ifIndex	InterfaceIndexOrZero	InetAddressIPv4
h3cCommon

Defined Types

H3cDhcpServer2PoolEntry
SEQUENCE
	h3cDhcpServer2PoolIndex	Unsigned32
	h3cDhcpServer2PoolName	OCTET STRING
	h3cDhcpServer2PoolVpnName	OCTET STRING
	h3cDhcpServer2PoolNetwork	InetAddressIPv4
	h3cDhcpServer2PoolNetworkMask	InetAddressIPv4
	h3cDhcpServer2PoolStartAddr	InetAddressIPv4
	h3cDhcpServer2PoolEndAddr	InetAddressIPv4
	h3cDhcpServer2PoolLeaseDay	Integer32
	h3cDhcpServer2PoolLeaseHour	Integer32
	h3cDhcpServer2PoolLeaseMinute	Integer32
	h3cDhcpServer2PoolLeaseSecond	Integer32
	h3cDhcpServer2PoolLeaseUnlimit	TruthValue
	h3cDhcpServer2PoolLeaseTime	TimeTicks
	h3cDhcpServer2PoolDomainName	OCTET STRING
	h3cDhcpServer2PoolGatewayIP	OCTET STRING
	h3cDhcpServer2PoolDNSIP	OCTET STRING
	h3cDhcpServer2PoolPrimaryDNSIP	InetAddressIPv4
	h3cDhcpServer2PoolSecondDNSIP	InetAddressIPv4
	h3cDhcpServer2PoolNetbiosType	INTEGER
	h3cDhcpServer2PoolNbnsIP	OCTET STRING
	h3cDhcpServer2PoolBootFileName	OCTET STRING
	h3cDhcpServer2PoolBimsIP	InetAddressIPv4
	h3cDhcpServer2PoolBimsPort	Unsigned32
	h3cDhcpServer2PoolBimsKeyStr	OCTET STRING
	h3cDhcpServer2PoolNextServer	InetAddressIPv4
	h3cDhcpServer2PoolTftpDomName	OCTET STRING
	h3cDhcpServer2PoolTftpIP	InetAddressIPv4
	h3cDhcpServer2PoolVoiceAsIP	InetAddressIPv4
	h3cDhcpServer2PoolVoiceFailIP	InetAddressIPv4
	h3cDhcpServer2PoolVoiceFailStr	OCTET STRING
	h3cDhcpServer2PoolVoiceNCPIP	InetAddressIPv4
	h3cDhcpServer2PoolVoiceVlanId	Unsigned32
	h3cDhcpServer2PoolVoiceVlanEnbl	TruthValue
	h3cDhcpServer2PoolRowStatus	RowStatus
	h3cDhcpServer2PoolVerifyClass	TruthValue

H3cDhcpServer2IfApplyPoolEntry
SEQUENCE
	h3cDhcpServer2IfApplyPoolName	OCTET STRING

H3cDhcpServer2PoolSecNwEntry
SEQUENCE
	h3cDhcpServer2PoolSecNw	InetAddressIPv4
	h3cDhcpServer2PoolSecNwMask	InetAddressIPv4
	h3cDhcpServer2PoolSecNwGwIP	OCTET STRING
	h3cDhcpServer2PoolSecNwStatus	RowStatus

H3cDhcpServer2PoolClassEntry
SEQUENCE
	h3cDhcpServer2PoolClassName	OCTET STRING
	h3cDhcpServer2PoolClassStart	InetAddressIPv4
	h3cDhcpServer2PoolClassEnd	InetAddressIPv4
	h3cDhcpServer2PoolClassStatus	RowStatus

H3cDhcpServer2PoolStaticEntry
SEQUENCE
	h3cDhcpServer2PoolStaticIP	InetAddressIPv4
	h3cDhcpServer2PoolStaticMask	InetAddressIPv4
	h3cDhcpServer2PoolStaticCID	OCTET STRING
	h3cDhcpServer2PoolStaticHAddr	OCTET STRING
	h3cDhcpServer2PoolStaticHType	INTEGER
	h3cDhcpServer2PoolStaticStatus	RowStatus

H3cDhcpServer2PoolOptionEntry
SEQUENCE
	h3cDhcpServer2PoolOptCode	Integer32
	h3cDhcpServer2PoolOptType	INTEGER
	h3cDhcpServer2PoolOptAscii	OCTET STRING
	h3cDhcpServer2PoolOptHexStr	OCTET STRING
	h3cDhcpServer2PoolOptIPStr	OCTET STRING
	h3cDhcpServer2PoolOptRowStatus	RowStatus

H3cDhcpServer2PoolForbidEntry
SEQUENCE
	h3cDhcpServer2PoolForbidIP	InetAddressIPv4
	h3cDhcpServer2PoolForbidStatus	RowStatus

H3cDhcpServer2ClassEntry
SEQUENCE
	h3cDhcpServer2ClassName	OCTET STRING
	h3cDhcpServer2ClassRowStatus	RowStatus

H3cDhcpServer2RuleEntry
SEQUENCE
	h3cDhcpServer2RuleNumber	Integer32
	h3cDhcpServer2RuleOptCode	Integer32
	h3cDhcpServer2RuleOptHexStr	OCTET STRING
	h3cDhcpServer2RuleOptMask	OCTET STRING
	h3cDhcpServer2RuleOptOffset	Integer32
	h3cDhcpServer2RuleOptLength	Integer32
	h3cDhcpServer2RuleRowStatus	RowStatus

H3cDhcpServer2ForbidEntry
SEQUENCE
	h3cDhcpServer2ForbidVpnName	OCTET STRING
	h3cDhcpServer2ForbidStart	InetAddressIPv4
	h3cDhcpServer2ForbidEnd	InetAddressIPv4
	h3cDhcpServer2ForbidRowStatus	RowStatus

H3cDhcpServer2FreeEntry
SEQUENCE
	h3cDhcpServer2FreeStart	InetAddressIPv4
	h3cDhcpServer2FreeEnd	InetAddressIPv4

H3cDhcpServer2ConflictEntry
SEQUENCE
	h3cDhcpServer2ConflictIP	InetAddressIPv4
	h3cDhcpServer2ConflictType	INTEGER
	h3cDhcpServer2ConflictTime	OCTET STRING
	h3cDhcpServer2ConflictRowStatus	RowStatus

H3cDhcpServer2ExpiredEntry
SEQUENCE
	h3cDhcpServer2ExpiredIP	InetAddressIPv4
	h3cDhcpServer2ExpiredClientId	OCTET STRING
	h3cDhcpServer2ExpiredTime	OCTET STRING
	h3cDhcpServer2ExpiredRowStatus	RowStatus

H3cDhcpServer2IPInUseEntry
SEQUENCE
	h3cDhcpServer2IPInUseIP	InetAddressIPv4
	h3cDhcpServer2IPInUseClientId	OCTET STRING
	h3cDhcpServer2IPInUseHardAddr	OCTET STRING
	h3cDhcpServer2IPInUseHardType	INTEGER
	h3cDhcpServer2IPInUseVlanId	Unsigned32
	h3cDhcpServer2IPInUseEndLease	OCTET STRING
	h3cDhcpServer2IPInUseType	INTEGER
	h3cDhcpServer2IPInUseIfIndex	InterfaceIndexOrZero
	h3cDhcpServer2IPInUseRowStatus	RowStatus

H3cDhcpServer2DefOptGrpEntry
SEQUENCE
	h3cDhcpServer2DefOptGrpClass	OCTET STRING
	h3cDhcpServer2DefOptGrpId	Integer32
	h3cDhcpServer2DefOptGrpStatus	RowStatus

H3cDhcpServer2ValidClassEntry
SEQUENCE
	h3cDhcpServer2ValidClassName	OCTET STRING
	h3cDhcpServer2ValidClassStatus	RowStatus

H3cDhcpServer2RuleHwAddrEntry
SEQUENCE
	h3cDhcpServer2RuleHwAddrNumber	Integer32
	h3cDhcpServer2RuleHwAddress	OCTET STRING
	h3cDhcpServer2RuleHwAddrMask	OCTET STRING
	h3cDhcpServer2RuleHwAddrType	Integer32
	h3cDhcpServer2RuleHwAddrStatus	RowStatus

H3cDhcpServer2OptionGroupEntry
SEQUENCE
	h3cDhcpServer2OptionGroupId	Integer32
	h3cDhcpServer2OptionGroupStatus	RowStatus

H3cDhcpServer2OptionEntry
SEQUENCE
	h3cDhcpServer2OptionCode	Integer32
	h3cDhcpServer2OptionType	INTEGER
	h3cDhcpServer2OptionAscii	OCTET STRING
	h3cDhcpServer2OptionHexStr	OCTET STRING
	h3cDhcpServer2OptionIPStr	OCTET STRING
	h3cDhcpServer2OptionRowStatus	RowStatus

H3cDhcpRelay2IfConfigEntry
SEQUENCE
	h3cDhcpRelay2IfSelectRelay	TruthValue
	h3cDhcpRelay2IfCheckMac	TruthValue
	h3cDhcpRelay2IfOpt82Enable	TruthValue
	h3cDhcpRelay2IfOpt82Strategy	INTEGER
	h3cDhcpRelay2IfOpt82CIDMode	INTEGER
	h3cDhcpRelay2IfOpt82CIDNodeType	INTEGER
	h3cDhcpRelay2IfOpt82CIDNodeStr	OCTET STRING
	h3cDhcpRelay2IfOpt82CIDStr	OCTET STRING
	h3cDhcpRelay2IfOpt82CIDFormat	INTEGER
	h3cDhcpRelay2IfOpt82RIDMode	INTEGER
	h3cDhcpRelay2IfOpt82RIDStr	OCTET STRING
	h3cDhcpRelay2IfOpt82RIDFormat	INTEGER

H3cDhcpRelay2SrvAddrEntry
SEQUENCE
	h3cDhcpRelay2SrvAddrIP	InetAddressIPv4
	h3cDhcpRelay2SrvAddrRowStatus	RowStatus

H3cDhcpRelay2UserInfoEntry
SEQUENCE
	h3cDhcpRelay2UserInfoVpnIndex	Unsigned32
	h3cDhcpRelay2UserInfoIpAddr	InetAddressIPv4
	h3cDhcpRelay2UserInfoMacAddr	MacAddress
	h3cDhcpRelay2UserInfoIfIndex	InterfaceIndexOrZero
	h3cDhcpRelay2UserInfoRowStatus	RowStatus

Defined Values

h3cDhcp4		1.3.6.1.4.1.2011.10.2.122
DHCPv4 MIB
MODULE-IDENTITY

h3cDhcpServer2ScalarObjects		1.3.6.1.4.1.2011.10.2.122.1
OBJECT IDENTIFIER

h3cDhcpServer2ConfigGroup		1.3.6.1.4.1.2011.10.2.122.1.1
OBJECT IDENTIFIER

h3cDhcpServer2Enabled		1.3.6.1.4.1.2011.10.2.122.1.1.1
If the value of this object is 'true', the DHCP service is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpServer2AlwaysBroadcast		1.3.6.1.4.1.2011.10.2.122.1.1.2
When the value of this object is set to 'true', the DHCP server always uses broadcast to reply the client.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpServer2IgnoreBootp		1.3.6.1.4.1.2011.10.2.122.1.1.3
When the value of this object is set to 'true', the DHCP server ignores BOOTP requests.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpServer2BootpReplyRfc1048		1.3.6.1.4.1.2011.10.2.122.1.1.4
When the value of this object is set to 'true', the DHCP server use RFC 1048 format to reply to BOOTP requests.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpServer2Opt82Enabled		1.3.6.1.4.1.2011.10.2.122.1.1.5
When the value of this object is set to 'true', the DHCP server handles DHCP option 82.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpServer2PingNumber		1.3.6.1.4.1.2011.10.2.122.1.1.6
The number of ping packets sent out.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..10

h3cDhcpServer2PingTimeout		1.3.6.1.4.1.2011.10.2.122.1.1.7
The delay for the reply of a ping packet in milliseconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..10000

h3cDhcpServer2StatGroup		1.3.6.1.4.1.2011.10.2.122.1.2
OBJECT IDENTIFIER

h3cDhcpServer2BadNum		1.3.6.1.4.1.2011.10.2.122.1.2.1
The total number of the bad packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2BootpRequestNum		1.3.6.1.4.1.2011.10.2.122.1.2.2
The total number of the BOOTREQUEST packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2DiscoverNum		1.3.6.1.4.1.2011.10.2.122.1.2.3
The total number of the DHCPDISCOVER packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2RequestNum		1.3.6.1.4.1.2011.10.2.122.1.2.4
The total number of the DHCPREQUEST packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2DeclineNum		1.3.6.1.4.1.2011.10.2.122.1.2.5
The total number of the DHCPDECLINE packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2ReleaseNum		1.3.6.1.4.1.2011.10.2.122.1.2.6
The total number of the DHCPRELEASE packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2InformNum		1.3.6.1.4.1.2011.10.2.122.1.2.7
The total number of the DHCPINFORM packets received from the DHCP clients.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2BootpReplyNum		1.3.6.1.4.1.2011.10.2.122.1.2.8
The total number of the BOOTREPLY packets sent by the DHCP server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2OfferNum		1.3.6.1.4.1.2011.10.2.122.1.2.9
The total number of the DHCPOFFER packets sent by the DHCP server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2AckNum		1.3.6.1.4.1.2011.10.2.122.1.2.10
The total number of the DHCPACK packets sent by the DHCP server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2NakNum		1.3.6.1.4.1.2011.10.2.122.1.2.11
The total number of the DHCPNAK packets sent by the DHCP server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpServer2TotalPoolUsage		1.3.6.1.4.1.2011.10.2.122.1.2.12
The percentage of IP addresses in use of all DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..100

h3cDhcpServer2PoolNumber		1.3.6.1.4.1.2011.10.2.122.1.2.13
The total number of DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

h3cDhcpServer2ConflictNum		1.3.6.1.4.1.2011.10.2.122.1.2.14
The total number of conflict IP in all DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

h3cDhcpServer2AutoBindNum		1.3.6.1.4.1.2011.10.2.122.1.2.15
The total number of auto binding IP in DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

h3cDhcpServer2ManualBindNum		1.3.6.1.4.1.2011.10.2.122.1.2.16
The total number of manual binding IP in DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

h3cDhcpServer2ExpiredBindNum		1.3.6.1.4.1.2011.10.2.122.1.2.17
The total number of expired binding IP in DHCP server pools.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

h3cDhcpServer2Tables		1.3.6.1.4.1.2011.10.2.122.2
OBJECT IDENTIFIER

h3cDhcpServer2PoolTable		1.3.6.1.4.1.2011.10.2.122.2.1
A table containing DHCP server pool configurations.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2PoolEntry

h3cDhcpServer2PoolEntry		1.3.6.1.4.1.2011.10.2.122.2.1.1
An entry containing DHCP server pool configurations.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2PoolEntry

h3cDhcpServer2PoolIndex		1.3.6.1.4.1.2011.10.2.122.2.1.1.1
DHCP server pool index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

h3cDhcpServer2PoolName		1.3.6.1.4.1.2011.10.2.122.2.1.1.2
DHCP server pool name. Once this object is created, the value of this object cannot be modified.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..63)

h3cDhcpServer2PoolVpnName		1.3.6.1.4.1.2011.10.2.122.2.1.1.3
Name of the VPN instance that the DHCP pool binds to. The value of a zero-length string means the public network. Once this object is created, the value of this object cannot be modified.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..31)

h3cDhcpServer2PoolNetwork		1.3.6.1.4.1.2011.10.2.122.2.1.1.4
Network address of the primary subnet in a DHCP pool. If the value of this object is set to 0.0.0.0, h3cDhcpServer2PoolNetworkMask is set with 0.0.0.0 automatically.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolNetworkMask		1.3.6.1.4.1.2011.10.2.122.2.1.1.5
Network mask of the primary subnet in a DHCP pool. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolStartAddr		1.3.6.1.4.1.2011.10.2.122.2.1.1.6
Start IP of an address range of the DHCP pool. If the value of this object is set to 0.0.0.0, h3cDhcpServer2PoolEndAddr is set with 0.0.0.0 automatically. Otherwise h3cDhcpServer2PoolEndAddr must be set with an IP address NOT smaller than the value of this object.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolEndAddr		1.3.6.1.4.1.2011.10.2.122.2.1.1.7
End IP of an address range of the DHCP pool, The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolStartAddr together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolLeaseDay		1.3.6.1.4.1.2011.10.2.122.2.1.1.8
Number of days of the lease. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolLeaseHour, h3cDhcpServer2PoolLeaseMinute, h3cDhcpServer2PoolLeaseSecond together, and any SET operation alone to any of these objects will be regarded as an invalid operation. These objects cannot be set with 0 simultaneously.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..365

h3cDhcpServer2PoolLeaseHour		1.3.6.1.4.1.2011.10.2.122.2.1.1.9
Number of hours of the lease.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..23

h3cDhcpServer2PoolLeaseMinute		1.3.6.1.4.1.2011.10.2.122.2.1.1.10
Number of minutes of the lease.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..59

h3cDhcpServer2PoolLeaseSecond		1.3.6.1.4.1.2011.10.2.122.2.1.1.11
Number of seconds of the lease.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..59

h3cDhcpServer2PoolLeaseUnlimit		1.3.6.1.4.1.2011.10.2.122.2.1.1.12
A flag denoting whether the lease time of a DHCP pool is unlimited.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

h3cDhcpServer2PoolLeaseTime		1.3.6.1.4.1.2011.10.2.122.2.1.1.13
The lease time of a DHCP pool in number of timeticks. The value of this object cannot be set to 0 and must be set to 4294967295 or a multiple of 100. If the object is set with 4294967295, the lease time of a DHCP pool is unlimited.
Status: current	Access: read-create
OBJECT-TYPE
	TimeTicks

h3cDhcpServer2PoolDomainName		1.3.6.1.4.1.2011.10.2.122.2.1.1.14
Domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the domain name is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..50)

h3cDhcpServer2PoolGatewayIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.15
Gateway IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

h3cDhcpServer2PoolDNSIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.16
DNS server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 DNS server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the DNS address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

h3cDhcpServer2PoolPrimaryDNSIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.17
The primary DNS server IP address to be assigned to the client.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolSecondDNSIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.18
The secondary DNS server IP address to be assigned to the client.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolNetbiosType		1.3.6.1.4.1.2011.10.2.122.2.1.1.19
NetBios node type for DHCP clients.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	null(0), bnode(1), pnode(2), mnode(4), hnode(8)

h3cDhcpServer2PoolNbnsIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.20
NetBios server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 NetBios server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the NBNS address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

h3cDhcpServer2PoolBootFileName		1.3.6.1.4.1.2011.10.2.122.2.1.1.21
Boot file name for DHCP clients. If the object is set with a zero-length string, the configuration of the boot file name is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..63)

h3cDhcpServer2PoolBimsIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.22
BIMS server IP address. If the object is set with 0.0.0.0, h3cDhcpServer2PoolBimsPort is set with 0 and h3cDhcpServer2PoolBimsKeyStr is set with a zero-length string automatically. Otherwise h3cDhcpServer2PoolBimsPort and h3cDhcpServer2PoolBimsKeyStr must be set at the same time while h3cDhcpServer2PoolBimsKeyStr must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolBimsPort		1.3.6.1.4.1.2011.10.2.122.2.1.1.23
BIMS server port number. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolBimsIP and h3cDhcpServer2PoolBimsKeyStr together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65534

h3cDhcpServer2PoolBimsKeyStr		1.3.6.1.4.1.2011.10.2.122.2.1.1.24
BIMS server key string. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolBimsIP and h3cDhcpServer2PoolBimsPort together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..16)

h3cDhcpServer2PoolNextServer		1.3.6.1.4.1.2011.10.2.122.2.1.1.25
Next DHCP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the next server address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolTftpDomName		1.3.6.1.4.1.2011.10.2.122.2.1.1.26
TFTP server domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the TFTP domain name is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..63)

h3cDhcpServer2PoolTftpIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.27
TFTP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the TFTP server address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolVoiceAsIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.28
Voice backup server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice backup server IP address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolVoiceFailIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.29
Voice failover IP address for DHCP clients. If the object is set with 0.0.0.0, h3cDhcpServer2PoolVoiceFailStr is set with a zero-length string automatically. Otherwise h3cDhcpServer2PoolVoiceFailStr must be set with a non-zero length string at the same time.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolVoiceFailStr		1.3.6.1.4.1.2011.10.2.122.2.1.1.30
Voice failover dialer string for DHCP clients. The characters in the string must be '0' ~ '9',or '*'. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolVoiceFailIP together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..39)

h3cDhcpServer2PoolVoiceNCPIP		1.3.6.1.4.1.2011.10.2.122.2.1.1.31
Voice network calling processing IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice network calling processing IP address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolVoiceVlanId		1.3.6.1.4.1.2011.10.2.122.2.1.1.32
Voice VLAN ID for DHCP clients. If the value of this object is set to 65535, h3cDhcpServer2PoolVoiceVlanEnbl is set with 'false' automatically. Otherwise h3cDhcpServer2PoolVoiceVlanEnbl must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	2..4094 \| 65535

h3cDhcpServer2PoolVoiceVlanEnbl		1.3.6.1.4.1.2011.10.2.122.2.1.1.33
Enable status of the specified voice VLAN for DHCP clients. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolVoiceVlanId together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

h3cDhcpServer2PoolRowStatus		1.3.6.1.4.1.2011.10.2.122.2.1.1.34
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2PoolVerifyClass		1.3.6.1.4.1.2011.10.2.122.2.1.1.35
Enable the user class verification. When the value of this object is set to 'true', the DHCP server processes packets from DHCP clients in the defined user classes. The user class verification does not apply to packets from DHCP clients with static bindings.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

h3cDhcpServer2IfApplyPoolTable		1.3.6.1.4.1.2011.10.2.122.2.2
A table for applying a DHCP pool on interfaces.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2IfApplyPoolEntry

h3cDhcpServer2IfApplyPoolEntry		1.3.6.1.4.1.2011.10.2.122.2.2.1
An entry for applying a DHCP pool on the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2IfApplyPoolEntry

h3cDhcpServer2IfApplyPoolName		1.3.6.1.4.1.2011.10.2.122.2.2.1.1
The name of the DHCP pool that apply to the interface. If the object is set with a zero-length string, the configuration will be deleted.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..63)

h3cDhcpServer2PoolSecNwTable		1.3.6.1.4.1.2011.10.2.122.2.3
A table containing the secondary network configuration of DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2PoolSecNwEntry

h3cDhcpServer2PoolSecNwEntry		1.3.6.1.4.1.2011.10.2.122.2.3.1
An entry containing the objects for configuring the secondary network for DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2PoolSecNwEntry

h3cDhcpServer2PoolSecNw		1.3.6.1.4.1.2011.10.2.122.2.3.1.1
Network address of the secondary subnets in a DHCP pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolSecNwMask		1.3.6.1.4.1.2011.10.2.122.2.3.1.2
Network mask of the secondary subnets in a DHCP pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolSecNwGwIP		1.3.6.1.4.1.2011.10.2.122.2.3.1.3
Gateway IP addresses of the secondary subnets in a DHCP pool. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a secondary network, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

h3cDhcpServer2PoolSecNwStatus		1.3.6.1.4.1.2011.10.2.122.2.3.1.4
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2PoolClassTable		1.3.6.1.4.1.2011.10.2.122.2.4
A table containing address range of the DHCP server pool for user classes.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2PoolClassEntry

h3cDhcpServer2PoolClassEntry		1.3.6.1.4.1.2011.10.2.122.2.4.1
An entry containing address range of DHCP pools for user classes.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2PoolClassEntry

h3cDhcpServer2PoolClassName		1.3.6.1.4.1.2011.10.2.122.2.4.1.1
User class name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..63)

h3cDhcpServer2PoolClassStart		1.3.6.1.4.1.2011.10.2.122.2.4.1.2
Start address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolClassEnd together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolClassEnd		1.3.6.1.4.1.2011.10.2.122.2.4.1.3
End address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolClassStart together, and any SET operation alone to this object will be regarded as an invalid operation. This object must be set with an IP address NOT smaller than the value of h3cDhcpServer2PoolClassStart.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolClassStatus		1.3.6.1.4.1.2011.10.2.122.2.4.1.4
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2PoolClassStart and h3cDhcpServer2PoolClassEnd must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2PoolStaticTable		1.3.6.1.4.1.2011.10.2.122.2.5
A table containing the static binding configurations in DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2PoolStaticEntry

h3cDhcpServer2PoolStaticEntry		1.3.6.1.4.1.2011.10.2.122.2.5.1
An entry containing the objects for configuring the static binding in DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2PoolStaticEntry

h3cDhcpServer2PoolStaticIP		1.3.6.1.4.1.2011.10.2.122.2.5.1.1
Ip address of a static binding in a DHCP pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolStaticMask		1.3.6.1.4.1.2011.10.2.122.2.5.1.2
Network mask of a static binding in a DHCP pool.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolStaticCID		1.3.6.1.4.1.2011.10.2.122.2.5.1.3
Client identifier of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0\|4..254)

h3cDhcpServer2PoolStaticHAddr		1.3.6.1.4.1.2011.10.2.122.2.5.1.4
Hardware address of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0\|4..39)

h3cDhcpServer2PoolStaticHType		1.3.6.1.4.1.2011.10.2.122.2.5.1.5
Hardware type of a DHCP client that the IP address binds to. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolStaticHAddr, and any SET operation alone to this object will be regarded as an invalid operation. 'default' indicates that the hardware type is unknown. If the value of h3cDhcpServer2PoolStaticCID is set to a non-zero length string, the object is set with 'default' automatically. Otherwise it cannot be set with 'default'. 'ethernet' indicates that the hardware type is ethernet. If the value of h3cDhcpServer2PoolStaticHAddr is set with a non-zero length string, the default value of this object is 'ethernet'. 'tokenRing' indicates that the hardware type is token-ring.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	default(1), ethernet(2), tokenRing(3)

h3cDhcpServer2PoolStaticStatus		1.3.6.1.4.1.2011.10.2.122.2.5.1.6
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2PoolStaticCID or (h3cDhcpServer2PoolStaticHardAddr and h3cDhcpServer2PoolStaticHardType) must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2PoolOptionTable		1.3.6.1.4.1.2011.10.2.122.2.6
A table for configuring user-defined options for DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2PoolOptionEntry

h3cDhcpServer2PoolOptionEntry		1.3.6.1.4.1.2011.10.2.122.2.6.1
An entry containing the objects for configuring user-defined options for DHCP pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2PoolOptionEntry

h3cDhcpServer2PoolOptCode		1.3.6.1.4.1.2011.10.2.122.2.6.1.1
Option code.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	2..254

h3cDhcpServer2PoolOptType		1.3.6.1.4.1.2011.10.2.122.2.6.1.2
Option type. 'ascii' means using the ascii string that is defined by h3cDhcpServer2PoolOptAscii to fill in the option. 'hex' means using the hex string that is defined by h3cDhcpServer2PoolOptHexStr to fill in the option. 'ip' means using the IP string that is defined by h3cDhcpServer2PoolOptIPStr to fill in the option.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ascii(1), hex(2), ip(3)

h3cDhcpServer2PoolOptAscii		1.3.6.1.4.1.2011.10.2.122.2.6.1.3
Ascii string of an option. If h3cDhcpServer2PoolOptType is set with 'ascii', this object must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..255)

h3cDhcpServer2PoolOptHexStr		1.3.6.1.4.1.2011.10.2.122.2.6.1.4
Hex string of an option. The length of the string must be even. If h3cDhcpServer2PoolOptType is set with 'hex', this object must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..510)

h3cDhcpServer2PoolOptIPStr		1.3.6.1.4.1.2011.10.2.122.2.6.1.5
IP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If h3cDhcpServer2PoolOptType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

h3cDhcpServer2PoolOptRowStatus		1.3.6.1.4.1.2011.10.2.122.2.6.1.6
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2PoolOptType must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2PoolForbidTable		1.3.6.1.4.1.2011.10.2.122.2.7
A table for configuring forbidden IP for a DHCP server pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2PoolForbidEntry

h3cDhcpServer2PoolForbidEntry		1.3.6.1.4.1.2011.10.2.122.2.7.1
An entry for configuring forbidden IP for a DHCP server pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2PoolForbidEntry

h3cDhcpServer2PoolForbidIP		1.3.6.1.4.1.2011.10.2.122.2.7.1.1
Forbidden IP of the DHCP pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2PoolForbidStatus		1.3.6.1.4.1.2011.10.2.122.2.7.1.2
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2ClassTable		1.3.6.1.4.1.2011.10.2.122.2.8
A table for configuring user class to DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2ClassEntry

h3cDhcpServer2ClassEntry		1.3.6.1.4.1.2011.10.2.122.2.8.1
An entry for configuring user class to DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2ClassEntry

h3cDhcpServer2ClassName		1.3.6.1.4.1.2011.10.2.122.2.8.1.1
DHCP user class name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..63)

h3cDhcpServer2ClassRowStatus		1.3.6.1.4.1.2011.10.2.122.2.8.1.2
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2RuleTable		1.3.6.1.4.1.2011.10.2.122.2.9
A table for configuring option rules used to match DHCP users.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2RuleEntry

h3cDhcpServer2RuleEntry		1.3.6.1.4.1.2011.10.2.122.2.9.1
An entry for configuring option rules used to match DHCP users.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2RuleEntry

h3cDhcpServer2RuleNumber		1.3.6.1.4.1.2011.10.2.122.2.9.1.1
Rule number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..16

h3cDhcpServer2RuleOptCode		1.3.6.1.4.1.2011.10.2.122.2.9.1.2
Option code.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..254

h3cDhcpServer2RuleOptHexStr		1.3.6.1.4.1.2011.10.2.122.2.9.1.3
Hex string of an option. The length of the string must be even.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..510)

h3cDhcpServer2RuleOptMask		1.3.6.1.4.1.2011.10.2.122.2.9.1.4
The mask used to match options. The length of this object must be same with that of h3cDhcpServer2RuleOptHexStr. The SET operation of this object must be with the SET operation of h3cDhcpServer2RuleOptHexStr.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..510)

h3cDhcpServer2RuleOptOffset		1.3.6.1.4.1.2011.10.2.122.2.9.1.5
The option offset used to match users. The SET operation of this object must be with the SET operation of h3cDhcpServer2RuleOptHexStr, h3cDhcpServer2RuleOptLength.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..254

h3cDhcpServer2RuleOptLength		1.3.6.1.4.1.2011.10.2.122.2.9.1.6
The option length used to match user options. The SET operation of this object must be with the SET operation of h3cDhcpServer2RuleOptOffset.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

h3cDhcpServer2RuleRowStatus		1.3.6.1.4.1.2011.10.2.122.2.9.1.7
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2RuleOptCode must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2ForbidTable		1.3.6.1.4.1.2011.10.2.122.2.10
A table for configuring forbidden IP range to DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2ForbidEntry

h3cDhcpServer2ForbidEntry		1.3.6.1.4.1.2011.10.2.122.2.10.1
An entry for configuring forbidden IP range to DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2ForbidEntry

h3cDhcpServer2ForbidVpnName		1.3.6.1.4.1.2011.10.2.122.2.10.1.1
Name of the VPN instance that the forbidden IP range binds to. If the value of this object is 0x1, the network that the forbidden IP range belongs to is the public network.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..31)

h3cDhcpServer2ForbidStart		1.3.6.1.4.1.2011.10.2.122.2.10.1.2
Start IP of forbidden IP range.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2ForbidEnd		1.3.6.1.4.1.2011.10.2.122.2.10.1.3
End IP of forbidden IP range.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2ForbidRowStatus		1.3.6.1.4.1.2011.10.2.122.2.10.1.4
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2FreeTable		1.3.6.1.4.1.2011.10.2.122.2.11
A table for displaying free IP range for DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2FreeEntry

h3cDhcpServer2FreeEntry		1.3.6.1.4.1.2011.10.2.122.2.11.1
An entry for displaying free IP range for DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2FreeEntry

h3cDhcpServer2FreeStart		1.3.6.1.4.1.2011.10.2.122.2.11.1.1
Start IP of free IP range.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2FreeEnd		1.3.6.1.4.1.2011.10.2.122.2.11.1.2
End IP of free IP range.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2ConflictTable		1.3.6.1.4.1.2011.10.2.122.2.12
A table for displaying the information of conflict IP for DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2ConflictEntry

h3cDhcpServer2ConflictEntry		1.3.6.1.4.1.2011.10.2.122.2.12.1
An entry for displaying the information of conflict IP for DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2ConflictEntry

h3cDhcpServer2ConflictIP		1.3.6.1.4.1.2011.10.2.122.2.12.1.1
Conflict IP.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2ConflictType		1.3.6.1.4.1.2011.10.2.122.2.12.1.2
Type of the detection of conflict IP. 'detectByServer' denotes that the conflict is detected by DHCP server. 'detectByClient' denotes that the conflict is detected by DHCP client.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	detectByServer(1), detectByClient(2)

h3cDhcpServer2ConflictTime		1.3.6.1.4.1.2011.10.2.122.2.12.1.3
Time when the conflict is detected. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..19)

h3cDhcpServer2ConflictRowStatus		1.3.6.1.4.1.2011.10.2.122.2.12.1.4
RowStatus. Only destroy action is allow to use.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2ExpiredTable		1.3.6.1.4.1.2011.10.2.122.2.13
A table for displaying the information of expired IP for DHCP Server pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2ExpiredEntry

h3cDhcpServer2ExpiredEntry		1.3.6.1.4.1.2011.10.2.122.2.13.1
An entry of objects for displaying information of expired IP for DHCP server pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2ExpiredEntry

h3cDhcpServer2ExpiredIP		1.3.6.1.4.1.2011.10.2.122.2.13.1.1
Expired IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2ExpiredClientId		1.3.6.1.4.1.2011.10.2.122.2.13.1.2
Client identifier or hardware address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4..254)

h3cDhcpServer2ExpiredTime		1.3.6.1.4.1.2011.10.2.122.2.13.1.3
Expired time. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..19)

h3cDhcpServer2ExpiredRowStatus		1.3.6.1.4.1.2011.10.2.122.2.13.1.4
RowStatus. Only destroy action is allow to use.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2IPInUseTable		1.3.6.1.4.1.2011.10.2.122.2.14
A table for displaying the information of IP in use for DHCP Server pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2IPInUseEntry

h3cDhcpServer2IPInUseEntry		1.3.6.1.4.1.2011.10.2.122.2.14.1
An entry of objects for displaying information of IP in use for DHCP server pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2IPInUseEntry

h3cDhcpServer2IPInUseIP		1.3.6.1.4.1.2011.10.2.122.2.14.1.1
Ip address in use.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpServer2IPInUseClientId		1.3.6.1.4.1.2011.10.2.122.2.14.1.2
Client identifier.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0\|4..254)

h3cDhcpServer2IPInUseHardAddr		1.3.6.1.4.1.2011.10.2.122.2.14.1.3
Hardware address.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0\|4..39)

h3cDhcpServer2IPInUseHardType		1.3.6.1.4.1.2011.10.2.122.2.14.1.4
Hardware address type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	default(1), ethernet(2), tokenRing(3)

h3cDhcpServer2IPInUseVlanId		1.3.6.1.4.1.2011.10.2.122.2.14.1.5
User's VLAN ID. 65535 means that a client doesn't have VLAN ID or have an invalid VLAN ID.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4094 \| 65535

h3cDhcpServer2IPInUseEndLease		1.3.6.1.4.1.2011.10.2.122.2.14.1.6
End time of lease. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..19)

h3cDhcpServer2IPInUseType		1.3.6.1.4.1.2011.10.2.122.2.14.1.7
Type of binding.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	staticUnallocated(1), staticOffered(2), staticCommitted(3), autoOffered(4), autoCommitted(5)

h3cDhcpServer2IPInUseIfIndex		1.3.6.1.4.1.2011.10.2.122.2.14.1.8
Interface index information. If the value of this object is zero, the interface is unknown.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

h3cDhcpServer2IPInUseRowStatus		1.3.6.1.4.1.2011.10.2.122.2.14.1.9
RowStatus. Only destroy action is allow to use.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2DefOptGrpTable		1.3.6.1.4.1.2011.10.2.122.2.15
A table containing option group of the DHCP server pool for user classes.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2DefOptGrpEntry

h3cDhcpServer2DefOptGrpEntry		1.3.6.1.4.1.2011.10.2.122.2.15.1
An entry containing option group of DHCP pools for user classes.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2DefOptGrpEntry

h3cDhcpServer2DefOptGrpClass		1.3.6.1.4.1.2011.10.2.122.2.15.1.1
User class name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..63)

h3cDhcpServer2DefOptGrpId		1.3.6.1.4.1.2011.10.2.122.2.15.1.2
The option group ID.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..32768

h3cDhcpServer2DefOptGrpStatus		1.3.6.1.4.1.2011.10.2.122.2.15.1.3
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2DefOptGrpId must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2ValidClassTable		1.3.6.1.4.1.2011.10.2.122.2.16
A table containing valid user classes for DHCP server pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2ValidClassEntry

h3cDhcpServer2ValidClassEntry		1.3.6.1.4.1.2011.10.2.122.2.16.1
An entry containing valid user classes for DHCP server pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2ValidClassEntry

h3cDhcpServer2ValidClassName		1.3.6.1.4.1.2011.10.2.122.2.16.1.1
User class name.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..63)

h3cDhcpServer2ValidClassStatus		1.3.6.1.4.1.2011.10.2.122.2.16.1.2
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2RuleHwAddrTable		1.3.6.1.4.1.2011.10.2.122.2.17
A table for configuring hardware address rules used to match DHCP users.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2RuleHwAddrEntry

h3cDhcpServer2RuleHwAddrEntry		1.3.6.1.4.1.2011.10.2.122.2.17.1
An entry for configuring hardware address rules used to match DHCP users.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2RuleHwAddrEntry

h3cDhcpServer2RuleHwAddrNumber		1.3.6.1.4.1.2011.10.2.122.2.17.1.1
Rule number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..16

h3cDhcpServer2RuleHwAddress		1.3.6.1.4.1.2011.10.2.122.2.17.1.2
Hardware address for a rule. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2RuleHwAddrMask together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4..39)

h3cDhcpServer2RuleHwAddrMask		1.3.6.1.4.1.2011.10.2.122.2.17.1.3
Mask of hardware address for a rule. The structure of the OCTET STRING is the same with h3cDhcpServer2RuleHwAddress. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2RuleHwAddress together, and any SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4..39)

h3cDhcpServer2RuleHwAddrType		1.3.6.1.4.1.2011.10.2.122.2.17.1.4
Hardware type for a rule. The codes of all hardware types see ARP section in RFC 1700. The SET operation alone to this object will be regarded as an invalid operation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..255

h3cDhcpServer2RuleHwAddrStatus		1.3.6.1.4.1.2011.10.2.122.2.17.1.5
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2RuleHwAddrAddress and h3cDhcpServer2RuleHwAddrMask must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2OptionGroupTable		1.3.6.1.4.1.2011.10.2.122.2.18
A table for creating DHCP server option groups.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2OptionGroupEntry

h3cDhcpServer2OptionGroupEntry		1.3.6.1.4.1.2011.10.2.122.2.18.1
An entry containing objects for creating or deleting an option group.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2OptionGroupEntry

h3cDhcpServer2OptionGroupId		1.3.6.1.4.1.2011.10.2.122.2.18.1.1
The option group ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..32768

h3cDhcpServer2OptionGroupStatus		1.3.6.1.4.1.2011.10.2.122.2.18.1.2
RowStatus. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpServer2OptionTable		1.3.6.1.4.1.2011.10.2.122.2.19
A table for configuring options in an option group.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpServer2OptionEntry

h3cDhcpServer2OptionEntry		1.3.6.1.4.1.2011.10.2.122.2.19.1
An entry containing objects for configuring an option in an option group.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpServer2OptionEntry

h3cDhcpServer2OptionCode		1.3.6.1.4.1.2011.10.2.122.2.19.1.1
Option code.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	2..254

h3cDhcpServer2OptionType		1.3.6.1.4.1.2011.10.2.122.2.19.1.2
Option type. 'ascii' means using the ascii string that is defined by h3cDhcpServer2OptionAscii to fill in the option. 'hex' means using the hex string that is defined by h3cDhcpServer2OptionHexStr to fill in the option. 'ip' means using the IP string that is defined by h3cDhcpServer2OptionIPStr to fill in the option.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ascii(1), hex(2), ip(3)

h3cDhcpServer2OptionAscii		1.3.6.1.4.1.2011.10.2.122.2.19.1.3
Ascii string of an option. If h3cDhcpServer2OptionType is set with 'ascii', this object must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..255)

h3cDhcpServer2OptionHexStr		1.3.6.1.4.1.2011.10.2.122.2.19.1.4
Hex string of an option. The length of the string must be even. If h3cDhcpServer2OptionType is set with 'hex', this object must be set with a non-zero length string.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..510)

h3cDhcpServer2OptionIPStr		1.3.6.1.4.1.2011.10.2.122.2.19.1.5
IP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If h3cDhcpServer2OptionType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

h3cDhcpServer2OptionRowStatus		1.3.6.1.4.1.2011.10.2.122.2.19.1.6
RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2OptionType must also be set.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpRelay2ScalarObjects		1.3.6.1.4.1.2011.10.2.122.3
OBJECT IDENTIFIER

h3cDhcpRelay2ConfigGroup		1.3.6.1.4.1.2011.10.2.122.3.1
OBJECT IDENTIFIER

h3cDhcpRelay2UserInfoRecord		1.3.6.1.4.1.2011.10.2.122.3.1.1
If the value is 'true', user information will be recorded.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpRelay2UserInfoRefresh		1.3.6.1.4.1.2011.10.2.122.3.1.2
If the value is 'true', user information will be refreshed on timer.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpRelay2UserInfoFlushTime		1.3.6.1.4.1.2011.10.2.122.3.1.3
User information refresh interval in seconds. If the value of the object is set to 0, the interval is calculated automatically by the number of user information entries.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..120

h3cDhcpRelay2ReleaseAddr		1.3.6.1.4.1.2011.10.2.122.3.1.4
User address to be released. The structure of the OCTET STRING is IP address:VPN name. If the VPN instance name is NOT specified, the IP address is in public network.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..47)

h3cDhcpRelay2StatisticsGroup		1.3.6.1.4.1.2011.10.2.122.3.2
OBJECT IDENTIFIER

h3cDhcpRelay2RxClientNum		1.3.6.1.4.1.2011.10.2.122.3.2.1
The total number of the packets received from DHCP clients by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2TxClientNum		1.3.6.1.4.1.2011.10.2.122.3.2.2
The total number of the packets transmitted to DHCP clients by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2RxServerNum		1.3.6.1.4.1.2011.10.2.122.3.2.3
The total number of the packets received from DHCP Servers by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2TxServerNum		1.3.6.1.4.1.2011.10.2.122.3.2.4
The total number of the packets transmitted to DHCP Servers by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2BadNum		1.3.6.1.4.1.2011.10.2.122.3.2.5
The total number of the bad packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2BootpRequestNum		1.3.6.1.4.1.2011.10.2.122.3.2.6
The total number of the BOOTREQUEST packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2DiscoverNum		1.3.6.1.4.1.2011.10.2.122.3.2.7
The total number of the DHCPDISCOVER packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2RequestNum		1.3.6.1.4.1.2011.10.2.122.3.2.8
The total number of the DHCPREQUEST packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2DeclineNum		1.3.6.1.4.1.2011.10.2.122.3.2.9
The total number of the DHCPDECLINE packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2ReleaseNum		1.3.6.1.4.1.2011.10.2.122.3.2.10
The total number of the DHCPRELEASE packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2InformNum		1.3.6.1.4.1.2011.10.2.122.3.2.11
The total number of the DHCPINFORM packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2BootpReplyNum		1.3.6.1.4.1.2011.10.2.122.3.2.12
The total number of the BOOTREPLY packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2OfferNum		1.3.6.1.4.1.2011.10.2.122.3.2.13
The total number of the DHCPOFFER packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2AckNum		1.3.6.1.4.1.2011.10.2.122.3.2.14
The total number of the DHCPACK packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2NakNum		1.3.6.1.4.1.2011.10.2.122.3.2.15
The total number of the DHCPNAK packets handled by DHCP relay.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

h3cDhcpRelay2Tables		1.3.6.1.4.1.2011.10.2.122.4
OBJECT IDENTIFIER

h3cDhcpRelay2IfConfigTable		1.3.6.1.4.1.2011.10.2.122.4.1
A table for configuring relay functions for interfaces.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpRelay2IfConfigEntry

h3cDhcpRelay2IfConfigEntry		1.3.6.1.4.1.2011.10.2.122.4.1.1
An entry for configuring relay functions for an interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpRelay2IfConfigEntry

h3cDhcpRelay2IfSelectRelay		1.3.6.1.4.1.2011.10.2.122.4.1.1.1
If the value is 'true', the DHCP relay function would be enabled on this interface.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpRelay2IfCheckMac		1.3.6.1.4.1.2011.10.2.122.4.1.1.2
If the value is 'true', the function of checking MAC address of packets received from the interface would be enabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpRelay2IfOpt82Enable		1.3.6.1.4.1.2011.10.2.122.4.1.1.3
If DHCP relay supports option 82 functions, the value is 'true'. If DHCP relay does NOT support option 82 functions, the value is 'false'.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDhcpRelay2IfOpt82Strategy		1.3.6.1.4.1.2011.10.2.122.4.1.1.4
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	drop(1), keep(2), replace(3)

h3cDhcpRelay2IfOpt82CIDMode		1.3.6.1.4.1.2011.10.2.122.4.1.1.5
The mode of the circuit ID suboption of DHCP option 82. 'normal' is the standard mode. 'verbose' is the detailed mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', h3cDhcpRelay2IfOpt82CIDStr must also be set.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), verbose(2), userDefine(3)

h3cDhcpRelay2IfOpt82CIDNodeType		1.3.6.1.4.1.2011.10.2.122.4.1.1.6
Type of access node identifier that is used to fill in the circuit ID suboption of option 82 when the value of h3cDhcpRelay2IfOpt82CIDMode is set to 'verbose'. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode. 'invalid' indicates that the node identifier is NOT used to fill in the circuit ID suboption of option 82. If the value of h3cDhcpRelay2IfOpt82CIDMode is NOT 'verbose', the value of this object is set to 'invalid' automatically. Otherwise the value of this object cannot be set to 'invalid'. 'mac' indicates that the node identifier is filled in with the MAC of DHCP relay input interface. If the value of h3cDhcpRelay2IfOpt82CIDMode is set to 'verbose', the default value of this object is 'mac'. 'sysname' indicates that the node identifier is filled in with the sysname of the DHCP relay device. 'userDefine' indicates that the node identifier is filled in with the string defined by the object of h3cDhcpRelay2IfOpt82CIDNodeStr. If the value is set to 'userDefine', the value of h3cDhcpRelay2IfOpt82CIDNodeStr must be set to a non-zero length string simultaneously.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	invalid(1), mac(2), sysname(3), userDefine(4)

h3cDhcpRelay2IfOpt82CIDNodeStr		1.3.6.1.4.1.2011.10.2.122.4.1.1.7
The string defined by user to fill in the node identifier in the verbose mode. If the value of h3cDhcpRelay2IfOpt82CIDMode is NOT 'verbose', or the value of h3cDhcpRelay2IfOpt82CIDNodeType is NOT 'userDefine', it is set with a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode and h3cDhcpRelay2IfOpt82CIDNodeType.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..50)

h3cDhcpRelay2IfOpt82CIDStr		1.3.6.1.4.1.2011.10.2.122.4.1.1.8
The string defined by user to fill in the circuit ID suboption of option 82 in the user-define mode. If the value of h3cDhcpRelay2IfOpt82CIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0\|3..63)

h3cDhcpRelay2IfOpt82CIDFormat		1.3.6.1.4.1.2011.10.2.122.4.1.1.9
The format of the circuit ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. 'undefine' is the undefine format. If the value of h3cDhcpRelay2IfOpt82CIDMode is 'normal', the value of this object is set to 'hex' automatically and cannot be set to 'undefine'. If the value of h3cDhcpRelay2IfOpt82CIDMode is 'verbose', the default value of this object is 'undefine'. If the value of h3cDhcpRelay2IfOpt82CIDMode is 'userDefine', the value of this object is set to 'ascii' automatically and cannot be set to other value. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hex(1), ascii(2), undefine(3)

h3cDhcpRelay2IfOpt82RIDMode		1.3.6.1.4.1.2011.10.2.122.4.1.1.10
The mode of the remote ID suboption of DHCP option 82. 'normal' is the standard mode. 'sysname' is the sysname mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', h3cDhcpRelay2IfOpt82RIDStr must also be set.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), sysname(2), userDefine(3)

h3cDhcpRelay2IfOpt82RIDStr		1.3.6.1.4.1.2011.10.2.122.4.1.1.11
The string defined by user to fill in the remote ID in the user-defined mode. If the value of h3cDhcpRelay2IfOpt82RIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82RIDMode.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..63)

h3cDhcpRelay2IfOpt82RIDFormat		1.3.6.1.4.1.2011.10.2.122.4.1.1.12
The format of the remote ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. If the value of h3cDhcpRelay2IfOpt82RIDMode is 'sysname' or 'userDefine', this object is set with 'ascii' automatically and cannot be set with other value. If the value of h3cDhcpRelay2IfOpt82RIDMode is 'normal', the default value of this object is 'hex'. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82RIDMode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hex(1), ascii(2)

h3cDhcpRelay2SrvAddrTable		1.3.6.1.4.1.2011.10.2.122.4.2
A table for configuring a DHCP server address on the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpRelay2SrvAddrEntry

h3cDhcpRelay2SrvAddrEntry		1.3.6.1.4.1.2011.10.2.122.4.2.1
An entry for configuring a DHCP server address on the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpRelay2SrvAddrEntry

h3cDhcpRelay2SrvAddrIP		1.3.6.1.4.1.2011.10.2.122.4.2.1.1
Ip address of DHCP server.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpRelay2SrvAddrRowStatus		1.3.6.1.4.1.2011.10.2.122.4.2.1.2
Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

h3cDhcpRelay2UserInfoTable		1.3.6.1.4.1.2011.10.2.122.4.3
A table containing the user information of DHCP client.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDhcpRelay2UserInfoEntry

h3cDhcpRelay2UserInfoEntry		1.3.6.1.4.1.2011.10.2.122.4.3.1
An entry containing the user information of DHCP client.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDhcpRelay2UserInfoEntry

h3cDhcpRelay2UserInfoVpnIndex		1.3.6.1.4.1.2011.10.2.122.4.3.1.1
VPN index of the DHCP client.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..65534

h3cDhcpRelay2UserInfoIpAddr		1.3.6.1.4.1.2011.10.2.122.4.3.1.2
DHCP client's IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressIPv4

h3cDhcpRelay2UserInfoMacAddr		1.3.6.1.4.1.2011.10.2.122.4.3.1.3
DHCP client's MAC address.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

h3cDhcpRelay2UserInfoIfIndex		1.3.6.1.4.1.2011.10.2.122.4.3.1.4
The index of the interface that DHCP client adhered to. 0 means that no interface information is recorded in the user information entry.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

h3cDhcpRelay2UserInfoRowStatus		1.3.6.1.4.1.2011.10.2.122.4.3.1.5
Operation status of this table entry. Only destroy action is allow to use.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus