G9981-MIB
File:
G9981-MIB.mib (41294 bytes)
Imported modules
Imported symbols
Defined Types
G9981PortConfEntry |
|
SEQUENCE |
|
|
|
|
g9981PortConfUpDiffDelayTolerance |
MilliSeconds |
|
|
g9981PortConfDnDiffDelayTolerance |
MilliSeconds |
|
|
g9981PortConfDiffDelayToleranceExceededEnable |
TruthValue |
|
G9981PortStatEntry |
|
SEQUENCE |
|
|
|
|
g9981PortStatRxLostCells |
Counter32 |
|
|
g9981PortStatTxLostCells |
Counter32 |
|
|
g9981PortStatMaxUpDiffDelay |
Unsigned32 |
|
|
g9981PortStatMaxDnDiffDelay |
Unsigned32 |
|
G9981PortPmCurEntry |
|
SEQUENCE |
|
|
|
|
g9981PortPmCur15MinValidIntervals |
HCPerfValidIntervals |
|
|
g9981PortPmCur15MinInvalidIntervals |
HCPerfInvalidIntervals |
|
|
g9981PortPmCur15MinTimeElapsed |
HCPerfTimeElapsed |
|
|
g9981PortPmCur15MinRxLostCells |
HCPerfCurrentCount |
|
|
g9981PortPmCur15MinTxLostCells |
HCPerfCurrentCount |
|
|
g9981PortPmCur15MinUpDiffDelay |
HCPerfCurrentCount |
|
|
g9981PortPmCur15MinDnDiffDelay |
HCPerfCurrentCount |
|
|
g9981PortPmCur1DayValidIntervals |
Unsigned32 |
|
|
g9981PortPmCur1DayInvalidIntervals |
Unsigned32 |
|
|
g9981PortPmCur1DayTimeElapsed |
HCPerfTimeElapsed |
|
|
g9981PortPmCur1DayRxLostCells |
HCPerfCurrentCount |
|
|
g9981PortPmCur1DayTxLostCells |
HCPerfCurrentCount |
|
|
g9981PortPmCur1DayUpDiffDelay |
HCPerfCurrentCount |
|
|
g9981PortPmCur1DayDnDiffDelay |
HCPerfCurrentCount |
|
G9981PortPm15MinEntry |
|
SEQUENCE |
|
|
|
|
g9981PortPm15MinIntervalIndex |
Unsigned32 |
|
|
g9981PortPm15MinIntervalMoniTime |
HCPerfTimeElapsed |
|
|
g9981PortPm15MinIntervalRxLostCells |
HCPerfIntervalCount |
|
|
g9981PortPm15MinIntervalTxLostCells |
HCPerfIntervalCount |
|
|
g9981PortPm15MinIntervalUpDiffDelay |
HCPerfIntervalCount |
|
|
g9981PortPm15MinIntervalDnDiffDelay |
HCPerfIntervalCount |
|
|
g9981PortPm15MinIntervalValid |
TruthValue |
|
G9981PortPm1DayEntry |
|
SEQUENCE |
|
|
|
|
g9981PortPm1DayIntervalIndex |
Unsigned32 |
|
|
g9981PortPm1DayIntervalMoniTime |
HCPerfTimeElapsed |
|
|
g9981PortPm1DayIntervalRxLostCells |
HCPerfIntervalCount |
|
|
g9981PortPm1DayIntervalTxLostCells |
HCPerfIntervalCount |
|
|
g9981PortPm1DayIntervalUpDiffDelay |
HCPerfIntervalCount |
|
|
g9981PortPm1DayIntervalDnDiffDelay |
HCPerfIntervalCount |
|
|
g9981PortPm1DayIntervalValid |
TruthValue |
|
Defined Values
g9981MIB |
1.3.6.1.2.1.208 |
The objects in this MIB module are used to manage the
multi-pair bonded xDSL interfaces using ATM inverse
multiplexing, as defined in ITU-T Recommendation G.998.1
(G.Bond/ATM).
This MIB module MUST be used in conjunction with the GBOND-MIB
module, common to all G.Bond technologies.
The following references are used throughout this MIB module:
[G.998.1] refers to:
ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding',
January 2005.
[TR-159] refers to:
Broadband Forum Technical Report: 'Management Framework for
xDSL Bonding', December 2008.
Naming Conventions:
ATM - Asynchronous Transfer Mode
BCE - Bonding Channel Entity
BTU - Bonding Terminating Unit
CO - Central Office
CPE - Customer Premises Equipment
GBS - Generic Bonding Sub-layer
GBS-C - Generic Bonding Sub-layer, CO side
GBS-R - Generic Bonding Sub-layer, RT (or CPE) side
PM - Performance Monitoring
RT - Remote Terminal
SNR - Signal to Noise Ratio
SES - Severely Errored Seconds
UAS - Unavailable Seconds
Copyright (c) 2013 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, is permitted pursuant to, and subject to the license
terms contained in, the Simplified BSD License set forth in Section
4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info). |
MODULE-IDENTITY |
|
|
|
g9981Port |
1.3.6.1.2.1.208.1.1 |
OBJECT IDENTIFIER |
|
|
|
g9981UpDiffDelayToleranceExceeded |
1.3.6.1.2.1.208.1.1.0.1 |
This notification indicates that the maximum upstream
differential delay has exceeded the max upstream differential
delay threshold, specified by
g9981PortConfUpDiffDelayTolerance.
This notification MAY be sent for the GBS-C ports while the
port is 'up', on the crossing event in both directions: from
normal (diff. delay is above the threshold) to low (diff.
delay equals the threshold or is below it) and from low to
normal. This notification is not applicable to the GBS-R
ports.
Generation of this notification is controlled by the
g9981PortConfDiffDelayToleranceExceededEnable attribute.
This object maps to the TR-159 notification
nIMAUpDiffDelayToleranceExceeded. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
g9981DnDiffDelayToleranceExceeded |
1.3.6.1.2.1.208.1.1.0.2 |
This notification indicates that the maximum downstream
differential delay has exceeded the max downstream
differential delay threshold, specified by
g9981PortConfDnDiffDelayTolerance.
This notification MAY be sent for the GBS-C ports while the
port is 'up', on the crossing event in both directions: from
normal (diff. delay is above the threshold) to low (diff.
delay equals the threshold or is below it) and from low to
normal. This notification is not applicable to the GBS-R
ports.
Generation of this notification is controlled by the
g9981PortConfDiffDelayToleranceExceededEnable attribute.
This object maps to the TR-159 notification
nIMADownDiffDelayToleranceExceeded. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
g9981PortConfTable |
1.3.6.1.2.1.208.1.1.1 |
Table for configuration of G.Bond/ATM ports. Entries in
this table MUST be maintained in a persistent manner. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
G9981PortConfEntry |
|
g9981PortConfEntry |
1.3.6.1.2.1.208.1.1.1.1 |
An entry in the G.Bond/ATM Port Configuration table.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of the GBOND-MIB.
Note that a G.Bond/ATM port runs on top of a single or
multiple BCE port(s), which are also indexed by the ifIndex. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
G9981PortConfEntry |
|
|
g9981PortConfUpDiffDelayTolerance |
1.3.6.1.2.1.208.1.1.1.1.1 |
A maximum tolerated upstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms.
This object is read-write for the GBS-C ports.
It is irrelevant for the GBS-R ports -- an attempt to read or
change this object MUST be rejected (in the case of SNMP, with
the error inconsistentValue).
This object maps to the TR-159 attribute
aIMAUpDiffDelayTolerance. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
MilliSeconds |
0..2047 |
|
g9981PortConfDnDiffDelayTolerance |
1.3.6.1.2.1.208.1.1.1.1.2 |
A maximum tolerated downstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms.
This object is read-write for the GBS-C ports.
It is irrelevant for the GBS-R ports -- an attempt to read or
change this object MUST be rejected (in the case of SNMP, with
the error inconsistentValue).
This object maps to the TR-159 attribute
aIMADownDiffDelayTolerance. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
MilliSeconds |
0..2047 |
|
g9981PortConfDiffDelayToleranceExceededEnable |
1.3.6.1.2.1.208.1.1.1.1.3 |
Indicates whether g9981UpDiffDelayToleranceExceeded and
g9981DnDiffDelayToleranceExceeded notifications should
be generated for G.Bond/ATM port.
A value of true(1) indicates that the notifications are enabled.
A value of false(2) indicates that the notifications are
disabled.
This object is read-write for the GBS-C.
It is irrelevant for the GBS-R ports -- an attempt to read or
change this object MUST be rejected (in the case of SNMP, with
the error inconsistentValue).
This object maps to the TR-159 attribute
aIMADiffDelayToleranceExceededEnable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
g9981PortStatTable |
1.3.6.1.2.1.208.1.1.2 |
This table provides overall status information of G.Bond/ATM
ports, complementing the generic status information from the
ifTable of the IF-MIB and the gBondFltStatus of the GBOND-MIB.
Additional status information about connected BCEs is available
from the relevant line MIBs.
This table contains live data from the equipment. As such, it
is NOT persistent. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
G9981PortStatEntry |
|
g9981PortStatEntry |
1.3.6.1.2.1.208.1.1.2.1 |
An entry in the G.Bond/ATM Port Status table.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex.
Note that a GBS port runs on top of a single or multiple BCE
port(s), which are also indexed by the ifIndex. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
G9981PortStatEntry |
|
|
g9981PortStatRxLostCells |
1.3.6.1.2.1.208.1.1.2.1.1 |
The number of lost ATM cells detected by the G.Bond/ATM port
in the receive direction (e.g., upstream direction for
a GBS-C port).
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime as
defined in the IF-MIB.
This object maps to the TR-159 attribute aIMARxLostCells. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
g9981PortStatTxLostCells |
1.3.6.1.2.1.208.1.1.2.1.2 |
The number of lost ATM cells detected by the peer G.Bond/ATM
port in the receive direction, i.e., downstream direction for a
GBS-C port.
This object is irrelevant for the GBS-R ports -- an attempt to
read it MUST be rejected (in the case of SNMP, with the error
inconsistentValue).
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime as
defined in the IF-MIB.
This object maps to the TR-159 attribute aIMAPeerRxLostCells. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
g9981PortStatMaxUpDiffDelay |
1.3.6.1.2.1.208.1.1.2.1.3 |
Current maximum upstream differential delay between all
operational BCEs in the G.Bond/ATM bonding group, measured in
units of 0.1 ms.
This object is read-only for the GBS-C ports.
It is irrelevant for the GBS-R ports -- an attempt to read this
object MUST be rejected (in the case of SNMP, with the error
inconsistentValue).
This object maps to the TR-159 attribute aIMAMaxUpDiffDelay. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
g9981PortStatMaxDnDiffDelay |
1.3.6.1.2.1.208.1.1.2.1.4 |
Current maximum downstream differential delay between all
operational BCEs in the G.Bond/ATM bonding group, measured in
units of 0.1 ms.
This object is read-only for the GBS-C ports.
It is irrelevant for the GBS-R ports -- an attempt to read this
object MUST be rejected (in the case of SNMP, with the error
inconsistentValue).
This object maps to the TR-159 attribute aIMAMaxDownDiffDelay. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
g9981PM |
1.3.6.1.2.1.208.1.1.3 |
OBJECT IDENTIFIER |
|
|
|
g9981PortPmCurTable |
1.3.6.1.2.1.208.1.1.3.1 |
This table contains current Performance Monitoring information
for a G.Bond/ATM port. This table contains live data from the
equipment and as such is NOT persistent. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
G9981PortPmCurEntry |
|
g9981PortPmCurEntry |
1.3.6.1.2.1.208.1.1.3.1.1 |
An entry in the G.Bond/ATM Port PM table.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
G9981PortPmCurEntry |
|
|
g9981PortPmCur15MinValidIntervals |
1.3.6.1.2.1.208.1.1.3.1.1.1 |
A read-only number of 15-minute intervals for which the
performance data was collected. The value of this object will
be 96 or the maximum number of 15-minute history intervals
collected by the implementation, unless the measurement was
(re)started recently, in which case the value will be the
number of complete 15-minute intervals for which there are at
least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfValidIntervals |
|
|
g9981PortPmCur15MinInvalidIntervals |
1.3.6.1.2.1.208.1.1.3.1.1.2 |
A read-only number of 15-minute intervals for which the
performance data was not always available. The value will
typically be zero, except in cases where the data for some
intervals are not available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfInvalidIntervals |
|
|
g9981PortPmCur15MinTimeElapsed |
1.3.6.1.2.1.208.1.1.3.1.1.3 |
A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance interval.
This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfTimeElapsed |
|
|
g9981PortPmCur15MinRxLostCells |
1.3.6.1.2.1.208.1.1.3.1.1.4 |
A read-only count of lost ATM cells detected by a G.Bond/ATM
port (e.g., the GBS-C) in the receive direction, during the
current 15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the
g9981PortStatRxLostCells object.
This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfCurrentCount |
|
|
g9981PortPmCur15MinTxLostCells |
1.3.6.1.2.1.208.1.1.3.1.1.5 |
A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the
current 15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the
g9981PortStatTxLostCells object.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfCurrentCount |
|
|
g9981PortPmCur15MinUpDiffDelay |
1.3.6.1.2.1.208.1.1.3.1.1.6 |
A read-only value specifying the maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in
units of 0.1 ms, during the current 15-minute performance
interval.
Note that the current max upstream differential delay is
indicated by the g9981PortStatMaxUpDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfCurrentCount |
|
|
g9981PortPmCur15MinDnDiffDelay |
1.3.6.1.2.1.208.1.1.3.1.1.7 |
A read-only value specifying the maximum downstream
differential delay between all operational BCEs in the GBS-C
(as perceived by the GBS-R), measured in units of 0.1 ms,
during the current 15-minute performance history interval.
Note that the current max downstream differential delay is
indicated by the g9981PortStatMaxDnDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfCurrentCount |
|
|
g9981PortPmCur1DayValidIntervals |
1.3.6.1.2.1.208.1.1.3.1.1.8 |
A read-only number of 1-day intervals for which data was
collected. The value of this object will be 7 or the maximum
number of 1-day history intervals collected by the
implementation, unless the measurement was (re)started recently,
in which case the value will be the number of complete 1-day
intervals for which there are at least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..7 |
|
g9981PortPmCur1DayInvalidIntervals |
1.3.6.1.2.1.208.1.1.3.1.1.9 |
A read-only number of 1-day intervals for which data was
not always available. The value will typically be zero, except
in cases where the data for some intervals are not available. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..7 |
|
g9981PortPmCur1DayTimeElapsed |
1.3.6.1.2.1.208.1.1.3.1.1.10 |
A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfTimeElapsed |
|
|
g9981PortPmCur1DayRxLostCells |
1.3.6.1.2.1.208.1.1.3.1.1.11 |
A read-only count of lost ATM cells detected by the G.Bond/ATM
port (e.g., the GBS-C) during the current 1-day performance
interval.
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfCurrentCount |
|
|
g9981PortPmCur1DayTxLostCells |
1.3.6.1.2.1.208.1.1.3.1.1.12 |
A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the
current 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfCurrentCount |
|
|
g9981PortPmCur1DayUpDiffDelay |
1.3.6.1.2.1.208.1.1.3.1.1.13 |
A read-only value specifying the maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in
units of 0.1 ms, during the current 1-day performance
interval.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfCurrentCount |
|
|
g9981PortPmCur1DayDnDiffDelay |
1.3.6.1.2.1.208.1.1.3.1.1.14 |
A read-only value specifying the maximum downstream
differential delay between all operational BCEs in the GBS-C,
measured in units of 0.1 ms, during the current 1-day
performance interval.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfCurrentCount |
|
|
g9981PortPm15MinTable |
1.3.6.1.2.1.208.1.1.3.2 |
This table contains historical 15-minute buckets of Performance
Monitoring information for a G.Bond/ATM port (a row for each
15-minute interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
G9981PortPm15MinEntry |
|
g9981PortPm15MinEntry |
1.3.6.1.2.1.208.1.1.3.2.1 |
An entry in the G.Bond/ATM Port historical 15-minute PM table.
Each entry represents Performance Monitoring data for a
G.Bond/ATM port, indexed by the ifIndex, collected during a
particular 15-minute interval, indexed by the
g9981PortPm15MinIntervalIndex. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
G9981PortPm15MinEntry |
|
|
g9981PortPm15MinIntervalIndex |
1.3.6.1.2.1.208.1.1.3.2.1.1 |
Performance data interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..96 |
|
g9981PortPm15MinIntervalMoniTime |
1.3.6.1.2.1.208.1.1.3.2.1.2 |
A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfTimeElapsed |
|
|
g9981PortPm15MinIntervalRxLostCells |
1.3.6.1.2.1.208.1.1.3.2.1.3 |
A read-only count of lost ATM cells detected by a G.Bond/ATM
port (e.g., the GBS-C) in the receive direction, during the
15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the
g9981PortStatRxLostCells object.
This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfIntervalCount |
|
|
g9981PortPm15MinIntervalTxLostCells |
1.3.6.1.2.1.208.1.1.3.2.1.4 |
A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the
15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the
g9981PortStatTxLostCells object.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfIntervalCount |
|
|
g9981PortPm15MinIntervalUpDiffDelay |
1.3.6.1.2.1.208.1.1.3.2.1.5 |
A read-only value specifying the maximum upstream differential
delay between all operational BCEs in the GBS, measured in
units of 0.1 ms, during the 15-minute performance history
interval.
Note that the current max upstream differential delay is
indicated by the g9981PortStatMaxUpDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfIntervalCount |
|
|
g9981PortPm15MinIntervalDnDiffDelay |
1.3.6.1.2.1.208.1.1.3.2.1.6 |
A read-only value specifying the maximum downstream
differential delay between all operational BCEs in the GBS,
as perceived by its peer port, measured in units of 0.1 ms,
during the 15-minute performance history interval.
Note that the current max downstream differential delay is
indicated by the g9981PortStatMaxDnDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfIntervalCount |
|
|
g9981PortPm15MinIntervalValid |
1.3.6.1.2.1.208.1.1.3.2.1.7 |
A read-only object indicating whether or not this history
bucket contains valid data. A valid bucket is reported as
true(1) and an invalid bucket as false(2).
If this history bucket is invalid, the BTU MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its database. In such a case, this object
is not required, as only valid history buckets are available
while invalid history buckets are simply not in the database.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
g9981PortPm1DayTable |
1.3.6.1.2.1.208.1.1.3.3 |
This table contains historical 1-day buckets of Performance
Monitoring information for a G.Bond/ATM port (a row for each
1-day interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
G9981PortPm1DayEntry |
|
g9981PortPm1DayEntry |
1.3.6.1.2.1.208.1.1.3.3.1 |
An entry in the G.Bond/ATM Port historical 1-day PM table.
Each entry represents Performance Monitoring data for such a
port, indexed by the ifIndex, collected during a particular
1-day interval, indexed by the g9981PortPm1DayIntervalIndex. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
G9981PortPm1DayEntry |
|
|
g9981PortPm1DayIntervalIndex |
1.3.6.1.2.1.208.1.1.3.3.1.1 |
Performance data interval number. 1 is the most recent previous
interval; interval 7 is 24 hours ago.
Intervals 2..7 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..7 |
|
g9981PortPm1DayIntervalMoniTime |
1.3.6.1.2.1.208.1.1.3.3.1.2 |
A count of seconds over which the performance data was actually
monitored. This value will be the same as the interval duration
(86400 seconds), except in a situation where performance data
could not be collected for any reason.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfTimeElapsed |
|
|
g9981PortPm1DayIntervalRxLostCells |
1.3.6.1.2.1.208.1.1.3.3.1.3 |
A count of lost ATM cells detected by the G.Bond/ATM port
(e.g., the GBS-C) during the 1-day performance history interval.
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfIntervalCount |
|
|
g9981PortPm1DayIntervalTxLostCells |
1.3.6.1.2.1.208.1.1.3.3.1.4 |
A count of lost ATM cells detected by the peer G.Bond/ATM port
(e.g., by the GBS-R for the GBS-C) during the 1-day performance
history interval.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfIntervalCount |
|
|
g9981PortPm1DayIntervalUpDiffDelay |
1.3.6.1.2.1.208.1.1.3.3.1.5 |
A read-only value specifying the maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in
units of 0.1 ms, during the 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfIntervalCount |
|
|
g9981PortPm1DayIntervalDnDiffDelay |
1.3.6.1.2.1.208.1.1.3.3.1.6 |
A read-only value specifying the maximum downstream
differential delay between all operational BCEs in the GBS-C,
measured in units of 0.1 ms, during the 1-day performance
history interval.
This object is inhibited during Unavailable Seconds (UAS). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HCPerfIntervalCount |
|
|
g9981PortPm1DayIntervalValid |
1.3.6.1.2.1.208.1.1.3.3.1.7 |
A read-only object indicating whether or not this history
bucket contains valid data. A valid bucket is reported as
true(1) and an invalid bucket as false(2).
If this history bucket is invalid, the BTU MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its database. In such a case, this object
is not required, as only valid history buckets are available
while invalid history buckets are simply not in the database.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
g9981BasicGroup |
1.3.6.1.2.1.208.2.1.1 |
A collection of objects representing management information
for a G.Bond/ATM port. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
g9981AlarmConfGroup |
1.3.6.1.2.1.208.2.1.2 |
A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond/ATM ports. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
g9981NotificationGroup |
1.3.6.1.2.1.208.2.1.3 |
This group supports notifications of significant conditions
associated with G.Bond/ATM ports. |
Status: current |
Access: read-only |
NOTIFICATION-GROUP |
|
|
|
g9981PerfCurrGroup |
1.3.6.1.2.1.208.2.1.4 |
A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/ATM ports. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
g9981Perf15MinGroup |
1.3.6.1.2.1.208.2.1.5 |
A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during
previous 15-minute intervals. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
g9981Perf1DayGroup |
1.3.6.1.2.1.208.2.1.6 |
A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during
previous 1-day intervals. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
g9981Compliance |
1.3.6.1.2.1.208.2.2.1 |
The compliance statement for G.Bond/ATM interfaces.
Compliance with the following external compliance statements
is REQUIRED:
MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
GBOND-MIB gBondCompliance |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|