File-Transfer-MIB

File: File-Transfer-MIB.mib (22799 bytes)

Imported modules

RFC-1215	RFC1155-SMI	RFC1213-MIB
RFC-1212

Imported symbols

TRAP-TYPE	enterprises	DisplayString
OBJECT-TYPE

Defined Types

FtPartnerEntry
SEQUENCE
	ftPartnerName	DisplayString	Size(1..8)
	ftPartnerType	INTEGER
	ftPartnerState	INTEGER
	ftPartnerNetworkAddr	DisplayString	Size(1..8)
	ftPartnerTransportSel	DisplayString	Size(1..19)
	ftPartnerSessionSel	DisplayString	Size(1..35)
	ftPartnerPresentationSel	DisplayString	Size(1..35)

Defined Values

sni		1.3.6.1.4.1.231
OBJECT IDENTIFIER

sniProductMibs		1.3.6.1.4.1.231.2
OBJECT IDENTIFIER

sniFT		1.3.6.1.4.1.231.2.18
OBJECT IDENTIFIER

sniFTStartandStop		1.3.6.1.4.1.231.2.18.1
OBJECT IDENTIFIER

sniFTSysParam		1.3.6.1.4.1.231.2.18.2
OBJECT IDENTIFIER

sniFTEncryptKey		1.3.6.1.4.1.231.2.18.3
OBJECT IDENTIFIER

sniFTStatistics		1.3.6.1.4.1.231.2.18.4
OBJECT IDENTIFIER

sniFTDiagnostics		1.3.6.1.4.1.231.2.18.5
OBJECT IDENTIFIER

sniFTTraps		1.3.6.1.4.1.231.2.18.6
OBJECT IDENTIFIER

sniFTPollInterval		1.3.6.1.4.1.231.2.18.7
OBJECT IDENTIFIER

sniFTPartners		1.3.6.1.4.1.231.2.18.8
OBJECT IDENTIFIER

sniFTTrapData		1.3.6.1.4.1.231.2.18.9
OBJECT IDENTIFIER

sniFTTrapSwitches		1.3.6.1.4.1.231.2.18.10
OBJECT IDENTIFIER

ftStartandStop		1.3.6.1.4.1.231.2.18.1.1
Object is supported in FT-BS2000 and FT-SINIX: Reading: Status of FT STARTED or NOT STARTED; writing: START or TERMINATE Filetransfer
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	start(1), stop(2), on(3), off(4), undefined(255)

ftStartandStopFTAM		1.3.6.1.4.1.231.2.18.1.2
Object is supported only in FT-SINIX: Reading: Status of FTAM - on or off; writing: START or TERMINATE FTAM
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	start(1), stop(2), on(3), off(4), not-yet(5), undefined(255)

ftSysparVersion		1.3.6.1.4.1.231.2.18.2.1
Object is supported in FT-BS2000 and FT-SINIX: Type and version of FT-system e.g. FT-BS2000 V5.2A20
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ftSysparTransportUnitSize		1.3.6.1.4.1.231.2.18.2.2
Object is supported in FT-BS2000 and FT-SINIX: Maximum size of transport unit (in Bytes)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	128..32767

ftSysparTaskLimit		1.3.6.1.4.1.231.2.18.2.3
Object is supported only in FT-BS2000: Maximum number of tasks that can be reserved simultaneously for the execution of the FT requests
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..32

ftSysparConnectionLimit		1.3.6.1.4.1.231.2.18.2.4
Object is supported only in FT-BS2000: Maximum number of transport connections that can be reserved for the execution of FT requests
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

ftSysparRequestWaitLevel		1.3.6.1.4.1.231.2.18.2.5
Object is supported only in FT-BS2000: Number of waiting requests that must exist before a parallel connection to that remote system is created
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..2500

ftSysparPartnerCheck		1.3.6.1.4.1.231.2.18.2.6
Object is supported only in FT-BS2000: Modification/Display of the extended authentication check
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	std(1), transport-address(2)

ftSysparMaxOSP		1.3.6.1.4.1.231.2.18.2.7
Object is supported only in FT-SINIX: Maximum number of requests issued locally (outbound) that can be processed simultaneously
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..128

ftSysparMaxISP		1.3.6.1.4.1.231.2.18.2.8
Object is supported only in FT-SINIX: Maximum number of requests issued remotely (inbound) that can be processed simultaneously
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..128

ftSysparProcessorName		1.3.6.1.4.1.231.2.18.2.9
Object is supported only in FT-SINIX: Processor name assigned to target system
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

ftSysparStationName		1.3.6.1.4.1.231.2.18.2.10
Object is supported only in FT-SINIX: Station name assigned to target system
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..16)

ftSysparCode		1.3.6.1.4.1.231.2.18.2.11
Object is supported only in FT-SINIX: eXtended Host Code Support (XHCS); possible values: ISO8859-i (i = 1,2,5,6,7,9)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	iso8859-1(1), iso8859-2(2), iso8859-5(5), iso8859-6(6), iso8859-7(7), iso8859-9(9), undefined(255)

ftSysparMaxInboundReqs		1.3.6.1.4.1.231.2.18.2.12
Object is supported in FT-BS2000 and FT-SINIX (FTOS-only): Maximum number of inbound requests per partner system
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1024

ftSysparMaxLifeTime		1.3.6.1.4.1.231.2.18.2.13
Object is supported in FT-SINIX (FTOS-only) and FT-BS2000: Maximum lifetime (in days) for requests in the request queue (max. 400 days) BS2000: 0 is the value for unlimited
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..400

ftEncryptKey		1.3.6.1.4.1.231.2.18.3.1
Object is supported in FT-BS2000 and FT-SINIX: Ability to create a new code for encryption
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	create-new-key(1)

ftStatSuspend		1.3.6.1.4.1.231.2.18.4.1
Object is supported only in FT-BS2000: Number of requests that are currently in SUSPEND status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftStatLocked		1.3.6.1.4.1.231.2.18.4.2
Object is supp. in FT-BS2000 and FT-SINIX (FTOS-only): Number of requests that are currently in LOCKED status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftStatWait		1.3.6.1.4.1.231.2.18.4.3
Object is supported in FT-BS2000 and FT-SINIX: Number of requests that are currently in WAIT status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftStatActive		1.3.6.1.4.1.231.2.18.4.4
Object is supported in FT-BS2000 and FT-SINIX: Number of requests that are currently in ACTIVE status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftStatCanceled		1.3.6.1.4.1.231.2.18.4.5
Object is supported in FT-BS2000 and FT-SINIX: Number of reqs that are currently in CANCELED status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftStatFinished		1.3.6.1.4.1.231.2.18.4.6
Object is supp. in FT-BS2000 and FT-SINIX (FTOS-only): Number of reqs that are currently in FINISHED status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftStatHold		1.3.6.1.4.1.231.2.18.4.7
Object is supported in FT-BS2000 and FT-SINIX: Number of requests that are currently in HOLD status
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftStatLocalReqs		1.3.6.1.4.1.231.2.18.4.8
Object is supported in FT-BS2000 and FT-SINIX: Number of async. requests issued in the local system, but not yet executed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftStatRemoteReqs		1.3.6.1.4.1.231.2.18.4.9
Object is supported in FT-BS2000 and FT-SINIX: Number of requests issued in the remote system, but not yet executed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ftDiagStatus		1.3.6.1.4.1.231.2.18.5.1
Object is supported in FT-BS2000 and FT-SINIX: Switches FT function on or off; abbreviations are: 1.pos=ftnea, 2.pos=ftam, 3.pos=session s: standard; n: none; m: minimum; p: partner 4-character abbreviations (2nd character m - memory) means ftnea-Trace only in Memory (only FT-BS2000)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), snn(2), pnn(3), mnn(4), nnn(5), ssn(6), sns(7), sss(8), psn(9), pns(10), pss(11), msn(12), mns(13), mss(14), nsn(15), nns(16), nss(17), on(18), smnn(19), smsn(20), smns(21), smss(22), pmnn(23), pmsn(24), pmns(25), pmss(26), mmnn(27), mmsn(28), mmns(29), mmss(30), undefined(255)

ftTrapsSubsystemState		1.3.6.1.4.1.231.2.18.10.1
Object is supported in FT-BS2000 only: Switch on/off sending of the traps ftSubsystemStartTrap and ftSubsystemStopTrap
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

ftTrapsFTState		1.3.6.1.4.1.231.2.18.10.2
Object is supported in FT-BS2000 only: Switch on/off sending of the traps ftStopTrap and ftStartTrap
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

ftTrapsPartState		1.3.6.1.4.1.231.2.18.10.3
Object is supported in FT-BS2000 only: Switch on/off sending of the trap ftPartnerStateTrap
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

ftTrapsPartnerUnreachable		1.3.6.1.4.1.231.2.18.10.4
Object is supported in FT-BS2000 only: Switch on/off sending of the trap ftPartnerUnreachableTrap
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

ftTrapsRequestQueueState		1.3.6.1.4.1.231.2.18.10.5
Object is supported in FT-BS2000 only: Switch on/off sending of the traps ftRequestQueueLowerLimitTrap and ftRequestQueueUpperLimitTrap
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

ftTrapsTransSucc		1.3.6.1.4.1.231.2.18.10.6
Object is supported in FT-BS2000 only: Switch on/off sending of the trap ftRequestSuccessfulTrap
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

ftTrapsTransFail		1.3.6.1.4.1.231.2.18.10.7
Object is supported in FT-BS2000 only: Switch on/off sending of the trap ftRequestErrorTrap
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

ftStopTrap		1
Sending a TRAP, if FT has exited/aborted (FT-SINIX and FT-BS2000)
TRAP-TYPE

ftMaxRequestTrap		2
Sending a TRAP, if the maximum number of FT requests is reached (only FT-SINIX)
TRAP-TYPE

ftErrorLimitTrap		3
Sending a TRAP, if the error limit is reached (concerning restarts - only FT-SINIX)
TRAP-TYPE

ftPartnerStateTrap		4
Sending a TRAP, if the Partner changed state (only FT-BS2000)
TRAP-TYPE

ftPartnerUnreachableTrap		5
Maybe Partner ist unreachable (only FT-BS2000)
TRAP-TYPE

ftStartTrap		6
Sending a TRAP, if FT has been started (only FT-BS2000)
TRAP-TYPE

ftRequestQueueUpperLimitTrap		7
at least 85 percent of Request file full (only FT-BS2000)
TRAP-TYPE

ftRequestQueueLowerLimitTrap		8
at least 20 percent of Request queue unoccupied (only FT-BS2000)
TRAP-TYPE

ftRequestSuccessfulTrap		9
Ft-Request was finished successfully (only FT-BS2000)
TRAP-TYPE

ftRequestErrorTrap		10
FT-Request finished with error (only FT-BS2000)
TRAP-TYPE

ftSubsystemStartTrap		11
Sending a TRAP, if Subsystem FT is started (only FT-BS2000)
TRAP-TYPE

ftSubsystemStopTrap		12
Sending a TRAP, if Subsystem FT is stopped (only FT-BS2000)
TRAP-TYPE

ftPollInterval		1.3.6.1.4.1.231.2.18.7.1
Object is supported only in FT-SINIX. The poll interval is the time in minutes between poll actions for verifying whether FT has been stopped, in order to send an ftStopTrap. The value 0 (zero) means: no polling. Default: 0 Reading: Informs poll interval. Writing: Sets poll interval.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ftPartnerTable		1.3.6.1.4.1.231.2.18.8.1
Table of FT or FTAM-Partners supported in FT-BS2000
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FtPartnerEntry

ftPartnerEntry		1.3.6.1.4.1.231.2.18.8.1.1
Entry describes one FT-(FTAM-)Partner
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	FtPartnerEntry

ftPartnerName		1.3.6.1.4.1.231.2.18.8.1.1.1
Object is supported in FT-BS2000: Name of FT-Partner
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ftPartnerType		1.3.6.1.4.1.231.2.18.8.1.1.2
Object is supported in FT-BS2000: Partner to be reached with openFT / FTAM - Protocol
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	openft(1), ftam(2)

ftPartnerState		1.3.6.1.4.1.231.2.18.8.1.1.3
Object is supported in FT-BS2000: Status of FT-Partner READ: Status ACT - AINACT, WRITE: Status ACT, DEACT, ADEAC
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	act(1), inact(2), nocon(3), lunk(4), runk(5), adeact(6), ainact(7)

ftPartnerNetworkAddr		1.3.6.1.4.1.231.2.18.8.1.1.4
Object is supported in FT-BS2000: Layer 3 Address of Partner
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ftPartnerTransportSel		1.3.6.1.4.1.231.2.18.8.1.1.5
Object is supported in FT-BS2000: Layer 4 Address of Partner
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..19)

ftPartnerSessionSel		1.3.6.1.4.1.231.2.18.8.1.1.6
Object is supported in FT-BS2000: Layer 5 Address of Partner
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ftPartnerPresentationSel		1.3.6.1.4.1.231.2.18.8.1.1.7
Object is supported in FT-BS2000: Layer 6 Address of Partner
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..35)

ftRequestID		1.3.6.1.4.1.231.2.18.9.1
Transfer ID of FT-Request (only FT-BS2000)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

ftRequestInitiator		1.3.6.1.4.1.231.2.18.9.2
Initiator of FT-Request (only FT-BS2000)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	local(1), remote(2)

ftRequestPartnerName		1.3.6.1.4.1.231.2.18.9.3
Partner of FT-Request (only FT-BS2000)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..8)

ftRequestUserID		1.3.6.1.4.1.231.2.18.9.4
UserID of FT-Request (only FT-BS2000)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..8)

ftRequestFileName		1.3.6.1.4.1.231.2.18.9.5
name of transferred File (only FT-BS2000)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..221)

ftRequestError		1.3.6.1.4.1.231.2.18.9.6
Error in Request (only FT-BS2000)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..7)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor