FSS-COMMON-LOG

File: FSS-COMMON-LOG.mib (18425 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
FSS-COMMON-SMI FSS-COMMON-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
NOTIFICATION-TYPE DateAndTime DisplayString
RowPointer MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP fssCommon FCSeverity
FCCondEffect FCServEffect FCLocation
FCDirection FCTimePeriod FCCondType
FCTcaCondType FCTcCondType FCObjectName
FCTrapType FCStdObjectIndex FCStdTypeIndex
FCTrapHistIndex

Defined Types

FCStandingAlarmXEntry  
SEQUENCE    
  fssStdAlarmObjectIndex FCStdObjectIndex
  fssStdAlarmTypeIndex FCStdTypeIndex
  fssStdAlarmObjectName FCObjectName
  fssStdAlarmType FCCondType
  fssStdAlarmSeverity FCSeverity
  fssStdAlarmServEffect FCServEffect
  fssStdAlarmLocn FCLocation
  fssStdAlarmDir FCDirection

Defined Values

fssLog 1.3.6.1.4.1.211.1.24.12.1000
This MIB module contains common condition definitions used throughout the Fujitsu Network Communications, Inc. 1Finity devices.
MODULE-IDENTITY    

fssBase 1.3.6.1.4.1.211.1.24.12.500
OBJECT IDENTIFIER    

fssAlarm 1.3.6.1.4.1.211.1.24.12.200
OBJECT IDENTIFIER    

fssAlarmCurrent 1.3.6.1.4.1.211.1.24.12.200.1
OBJECT IDENTIFIER    

fssAlarmTraps 1.3.6.1.4.1.211.1.24.12.200.100
OBJECT IDENTIFIER    

fssAlarmPrefix 1.3.6.1.4.1.211.1.24.12.200.100.0
OBJECT IDENTIFIER    

fssTca 1.3.6.1.4.1.211.1.24.12.300
OBJECT IDENTIFIER    

fssTcaTraps 1.3.6.1.4.1.211.1.24.12.300.100
OBJECT IDENTIFIER    

fssTcaPrefix 1.3.6.1.4.1.211.1.24.12.300.100.0
OBJECT IDENTIFIER    

fssTc 1.3.6.1.4.1.211.1.24.12.400
OBJECT IDENTIFIER    

fssTcTraps 1.3.6.1.4.1.211.1.24.12.400.100
OBJECT IDENTIFIER    

fssTcPrefix 1.3.6.1.4.1.211.1.24.12.400.100.0
OBJECT IDENTIFIER    

fssCondTrap 1.3.6.1.4.1.211.1.24.12.200.100.0.1
This is a generic Trap for reporting conditions.
Status: current Access: read-only
NOTIFICATION-TYPE    

fssCondQual 1.3.6.1.4.1.211.1.24.12.200.100.100
A further description of the alarmType. Each product may contain further qualifications on existing conditions or may have their own unique condition types.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..4294967295  

fssTcaTrap 1.3.6.1.4.1.211.1.24.12.300.100.0.1
This is a generic Trap for reporting threshold crossing alerts.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

fssTcaCondQual 1.3.6.1.4.1.211.1.24.12.300.100.100
A further description of the tcaType. Each product may contain further qualifications on existing conditions or may have their own unique condition types.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..4294967295  

fssTcTrap 1.3.6.1.4.1.211.1.24.12.400.100.0.1
This is a generic Trap for reporting transient conditions.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

fssTcCondQual 1.3.6.1.4.1.211.1.24.12.400.100.100
A further description of the tcaType. Each product may contain further qualifications on existing conditions or may have their own unique condition types.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..4294967295  

fssStandingAlarmXTable 1.3.6.1.4.1.211.1.24.12.200.1.1
The table contains all the currently active standing conditions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FCStandingAlarmXEntry

fssStandingAlarmXEntry 1.3.6.1.4.1.211.1.24.12.200.1.1.1
Active standing conditions entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  FCStandingAlarmXEntry  

fssStdAlarmObjectIndex 1.3.6.1.4.1.211.1.24.12.200.1.1.1.1
A sequencial index, in combination with the fssStdAlarmTypeIndex uniquely identifies a Trap entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FCStdObjectIndex  

fssStdAlarmTypeIndex 1.3.6.1.4.1.211.1.24.12.200.1.1.1.2
A sequencial subindex, that sub-divides the fssStdAlarmObjectIndex and uniquely identifies a Trap entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  FCStdTypeIndex  

fssStdAlarmObjectName 1.3.6.1.4.1.211.1.24.12.200.1.1.1.3
The name of the object.
Status: current Access: read-only
OBJECT-TYPE    
  FCObjectName  

fssStdAlarmType 1.3.6.1.4.1.211.1.24.12.200.1.1.1.4
The condition type.
Status: current Access: read-only
OBJECT-TYPE    
  FCCondType  

fssStdAlarmSeverity 1.3.6.1.4.1.211.1.24.12.200.1.1.1.5
The severity of the condition.
Status: current Access: read-only
OBJECT-TYPE    
  FCSeverity  

fssStdAlarmServEffect 1.3.6.1.4.1.211.1.24.12.200.1.1.1.6
The service effect of the standing condition event or transient condition event.
Status: current Access: read-only
OBJECT-TYPE    
  FCServEffect  

fssStdAlarmLocn 1.3.6.1.4.1.211.1.24.12.200.1.1.1.7
The Location of the alarm.
Status: current Access: read-only
OBJECT-TYPE    
  FCLocation  

fssStdAlarmDir 1.3.6.1.4.1.211.1.24.12.200.1.1.1.8
The direction of the alarm.
Status: current Access: read-only
OBJECT-TYPE    
  FCDirection  

fssTrapObjectName 1.3.6.1.4.1.211.1.24.12.500.1
The name of the object generating the trap.
Status: current Access: read-only
OBJECT-TYPE    
  FCObjectName  

fssTrapDescription 1.3.6.1.4.1.211.1.24.12.500.2
The Trap description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

fssTrapType 1.3.6.1.4.1.211.1.24.12.500.3
The general type of Trap.
Status: current Access: read-only
OBJECT-TYPE    
  FCTrapType  

fssTrapTimeStamp 1.3.6.1.4.1.211.1.24.12.500.4
This object specifies the date and time the Trap was generated.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

fssAlarmType 1.3.6.1.4.1.211.1.24.12.200.3
The condition type of Trap.
Status: current Access: read-only
OBJECT-TYPE    
  FCCondType  

fssAlarmCondEffect 1.3.6.1.4.1.211.1.24.12.200.4
The effect of the alarm, whether it is standing or transient.
Status: current Access: read-only
OBJECT-TYPE    
  FCCondEffect  

fssAlarmTypeQual 1.3.6.1.4.1.211.1.24.12.200.5
The Trap Qualifier. which is .
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

fssAlarmLocn 1.3.6.1.4.1.211.1.24.12.200.6
The location of the Trap.
Status: current Access: read-only
OBJECT-TYPE    
  FCLocation  

fssAlarmDir 1.3.6.1.4.1.211.1.24.12.200.7
The direction of the Trap.
Status: current Access: read-only
OBJECT-TYPE    
  FCDirection  

fssAlarmSeverity 1.3.6.1.4.1.211.1.24.12.200.8
The severity of the alarm.
Status: current Access: read-only
OBJECT-TYPE    
  FCSeverity  

fssAlarmServiceEffect 1.3.6.1.4.1.211.1.24.12.200.9
Service affecting alarm. In general, SA is used when traffic is disrupted and NSA is used when the traffic is not disrupted.
Status: current Access: read-only
OBJECT-TYPE    
  FCServEffect  

fssTcaType 1.3.6.1.4.1.211.1.24.12.300.1
The threshold crossing alert type.
Status: current Access: read-only
OBJECT-TYPE    
  FCTcaCondType  

fssTcaTypeQual 1.3.6.1.4.1.211.1.24.12.300.2
The Trap Qualifier. which is .
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

fssTcaCondEffect 1.3.6.1.4.1.211.1.24.12.300.3
The effect of the alarm, whether it is standing or transient.
Status: current Access: read-only
OBJECT-TYPE    
  FCCondEffect  

fssTcaLocn 1.3.6.1.4.1.211.1.24.12.300.4
The location of the Trap.
Status: current Access: read-only
OBJECT-TYPE    
  FCLocation  

fssTcaDir 1.3.6.1.4.1.211.1.24.12.300.5
The direction of the Trap.
Status: current Access: read-only
OBJECT-TYPE    
  FCDirection  

fssTcaMonVal 1.3.6.1.4.1.211.1.24.12.300.6
The monitored value of the performance monitoring meter which raised the threshold crossing alert.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fssTcaThLev 1.3.6.1.4.1.211.1.24.12.300.7
The threshold value of the performance monitoring meter.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

fssTcaTimePeriod 1.3.6.1.4.1.211.1.24.12.300.8
The time period of the performance monitoring meter which raised the threshold crossing alert.
Status: current Access: read-only
OBJECT-TYPE    
  FCTimePeriod  

fssTcType 1.3.6.1.4.1.211.1.24.12.400.1
The threshold crossing alert type.
Status: current Access: read-only
OBJECT-TYPE    
  FCTcCondType  

fssTcTypeQual 1.3.6.1.4.1.211.1.24.12.400.2
The Trap Qualifier. which is .
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..80)  

fssLogConformance 1.3.6.1.4.1.211.1.24.12.1000.100
OBJECT IDENTIFIER    

fssLogGroups 1.3.6.1.4.1.211.1.24.12.1000.100.1
OBJECT IDENTIFIER    

fssLogCompliances 1.3.6.1.4.1.211.1.24.12.1000.100.2
OBJECT IDENTIFIER    

fssLogTrapCompliance 1.3.6.1.4.1.211.1.24.12.1000.100.2.1
The compliance statement for fss Common Log.
Status: current Access: read-only
MODULE-COMPLIANCE    

fssLogTrapGroup 1.3.6.1.4.1.211.1.24.12.1000.100.1.1
These objects contain Trap related information needed for correlating the Trap emission to the Trap history log and product specific Trap type.
Status: current Access: read-only
OBJECT-GROUP    

fssTcaLogTrapGroup 1.3.6.1.4.1.211.1.24.12.1000.100.1.2
These objects contain Trap related information needed for correlating the product specific Trap type.
Status: current Access: read-only
OBJECT-GROUP    

fssLogNotificationGroup 1.3.6.1.4.1.211.1.24.12.1000.100.1.100
These Traps represent the basic set of conditions and alarms within the Fujitsu Network Communications, Inc. System.
Status: current Access: read-only
NOTIFICATION-GROUP    

fssTcaLogNotificationGroup 1.3.6.1.4.1.211.1.24.12.1000.100.1.101
These Traps represent the basic set of threshold crossing alert conditions within the Fujitsu Network Communications, Inc. System.
Status: current Access: read-only
NOTIFICATION-GROUP    

fssTcLogNotificationGroup 1.3.6.1.4.1.211.1.24.12.1000.100.1.102
These Traps represent the basic set of transient conditions and events within the Fujitsu Network Communications, Inc. System.
Status: current Access: read-only
NOTIFICATION-GROUP    

fssLogStandingCompliance 1.3.6.1.4.1.211.1.24.12.1000.100.2.3
The compliance statement for fss Common Log MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

fssLogAlarmStandingGroup 1.3.6.1.4.1.211.1.24.12.1000.100.1.7
This group contains the objects which provide basic system level information.
Status: current Access: read-only
OBJECT-GROUP