FRI-OPT-MIB

File: FRI-OPT-MIB.mib (159491 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

Counter enterprises OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Cdx6500PPCTFRIPortEntry  
SEQUENCE    
  friPCfgPortNumber INTEGER
  friPCfgPortType INTEGER
  friPCfgConnectionType INTEGER
  friPCfgClockSource INTEGER
  friPCfgClockSpeed INTEGER
  friPCfgHighestStnNumber INTEGER
  friPCfgFrameSeqCounting INTEGER
  friPCfgPktSeqCounting INTEGER
  friPCfgCntrlProtocolSupport INTEGER
  friPCfgHighPriorityStn INTEGER
  friPCfgMaxVoiceBWBitsPerSec INTEGER
  friPCfgSegSizeVoicePresent INTEGER
  friPCfgSegSizeVoiceNotPresent INTEGER
  friPCfgT391Timer INTEGER
  friPCfgT392Timer INTEGER
  friPCfgN391PollCycle INTEGER
  friPCfgN392ErrsDuringMonitoredEvents INTEGER
  friPCfgN393MonitoredEvents INTEGER
  friPCfgNT1PollTimer INTEGER
  friPCfgNT2VerificationTimer INTEGER
  friPCfgNN1StatusPollingCycle INTEGER
  friPCfgNN2ErrsDuringMonitoredEvents INTEGER
  friPCfgNN3MonitoredEvents INTEGER
  friPCfgInvertTXClock INTEGER
  friPCfgControlProtocolOptions DisplayString
  friPCfgDiscardControlOptions INTEGER
  friPCfgStartSvcDlci INTEGER
  friPCfgSubscriberNumber OCTET STRING
  friPCfgMaxFmif INTEGER
  friPCfgT200 INTEGER
  friPCfgN200 INTEGER
  friPCfgWindowK INTEGER
  friPCfgT203 INTEGER
  friPCfgT303 INTEGER
  friPCfgT305 INTEGER
  friPCfgT308 INTEGER
  friPCfgT310 INTEGER
  friPCfgControlProtocol INTEGER
  friPCfguniState INTEGER
  friPCfguniSSVP INTEGER
  friPCfguniSSVNP INTEGER
  friPCfguniSegDelay INTEGER
  friPCfguniCheckPckSize INTEGER
  friPCfgElectricalInterfaceType INTEGER
  friPCfgV24ElectricalInterfaceOption INTEGER
  friPCfgHighSpeedElectricalInterfaceOption INTEGER

Cdx6500SPCTFRIStationEntry  
SEQUENCE    
  friSCfgPortNumber INTEGER
  friSCfgStnNumber INTEGER
  friSCfgStnType INTEGER
  friSCfgDLCI INTEGER
  friSCfgCommInfoRate INTEGER
  friSCfgCommBurstSize INTEGER
  friSCfgTransDelay INTEGER
  friSCfgCongControlMode INTEGER
  friSCfgLinkAddress INTEGER
  friSCfgPVCChannels INTEGER
  friSCfgStartingPVC INTEGER
  friSCfgSVCChannels INTEGER
  friSCfgStartingSVC INTEGER
  friSCfgVoiceSVCChannels INTEGER
  friSCfgInitialFrame INTEGER
  friSCfgT1RetryTimer INTEGER
  friSCfgT4PollTimer INTEGER
  friSCfgN2TransmissionTries INTEGER
  friSCfgKFrameWindow INTEGER
  friSCfgWPacketWindow INTEGER
  friSCfgPPacketSize INTEGER
  friSCfgDataQUpperThreshold INTEGER
  friSCfgDataQLowerThreshold INTEGER
  friSCfgRestartTimer INTEGER
  friSCfgResetTimer INTEGER
  friSCfgCallTimer INTEGER
  friSCfgClearTimer INTEGER
  friSCfgX25Options DisplayString
  friSCfgRestrictedConnDest DisplayString
  friSCfgCUGMembership DisplayString
  friSCfgBillingRecords INTEGER
  friSCfgFrameSegmenter INTEGER
  friSCfgVoiceCongCtrlMode INTEGER
  friSCfgPeakUtilization INTEGER
  friSCfgMaxInboundQueue INTEGER
  friSCfgAnnexGRateReduction INTEGER
  friSCfgCctType INTEGER
  friSCfgCallControl INTEGER
  friSCfgRetryInterval INTEGER
  friSCfgCallAttempts INTEGER
  friSCfgIdleInterval INTEGER
  friSCfgIeNegotiation DisplayString
  friSCfgSubaddress OCTET STRING
  friSCfgCalledNumber OCTET STRING
  friSCfgCalledSubaddress OCTET STRING
  friSCfgMinCir INTEGER
  friSCfgBurstExcess INTEGER
  friSCfgE2EEnabled INTEGER
  friSCfgE2EType INTEGER
  friSCfgE2ESSVP INTEGER
  friSCfgE2ESSVNP INTEGER
  friSCfgE2ESegDelayEnabled INTEGER
  friSCfgE2ECheckPckSize INTEGER
  friSCfgvoice-header INTEGER

Cdx6500PPSTFRIPortEntry  
SEQUENCE    
  friPStatsPortNumber INTEGER
  friPStatsPortType INTEGER
  friPStatsPortStatus INTEGER
  friPStatsConfiguredStns DisplayString
  friPStatsPortSpeed INTEGER
  friPStatsOpCntrlProtocol DisplayString
  friPStatsSPBackup DisplayString
  friPStatsPriorityStn INTEGER
  friPStatsLastStatsReset DisplayString

Cdx6500PPSTFRIDataSummaryEntry  
SEQUENCE    
  friDataSummPortNumber INTEGER
  friPStatsCharInTotal Counter
  friPStatsCharOutTotal Counter
  friPStatsCharInPerSec INTEGER
  friPStatsCharOutPerSec INTEGER
  friPStatsFramesInTotal Counter
  friPStatsFramesOutTotal Counter
  friPStatsFramesInPerSec INTEGER
  friPStatsFramesOutPerSec INTEGER
  friPStatsAvFrameSizeIn INTEGER
  friPStatsAvFrameSizeOut INTEGER
  friPStatsUtilIn INTEGER
  friPStatsUtilOut INTEGER

Cdx6500PPSTFRISummaryEntry  
SEQUENCE    
  friSummPortNumber INTEGER
  friPStatsCRCErrors Counter
  friPStatsOverrunErrors Counter
  friPStatsFrameLengthErrors Counter
  friPStatsUnderrunErrors Counter
  friPStatsUnknownDLCICount Counter
  friPStatsLastUnknownDLCI INTEGER
  friPStatsSplittingRatio INTEGER
  friPStatsTotalSegmentsLost INTEGER
  friPStatsMaxContiguousSegmentsLost INTEGER
  friPStatsVoiceBWOnPort INTEGER
  friPStatsFrameSegmenterSyncLost INTEGER
  friPStatsStatusEnqSentFull INTEGER
  friPStatsFullStatusRecd INTEGER
  friPStatsStatusEnqSentLIV INTEGER
  friPStatsLIVStatusRecd INTEGER
  friPStatsStatusEnqRecdFull INTEGER
  friPStatsStatusEnqRecdLIV INTEGER
  friPStatsAsyncUpdateRecd INTEGER
  friPStatsSeqNumMismatch INTEGER
  friPStatsTimeouts INTEGER

Cdx6500PPSTFRIISDNCallStatusEntry  
SEQUENCE    
  friISDNCallStatusPortNumber INTEGER
  friPStatsNumRxCallsSinceLastReset INTEGER
  friPStatsNumRxCallsRejected INTEGER
  friPStatsRxLastCallFailureCause INTEGER
  friPStatsRxLastCalledNumber DisplayString
  friPStatsRxLastCallingNumber DisplayString
  friPStatsRxMinCallDuration DisplayString
  friPStatsRxMaxCallDuration DisplayString
  friPStatsRxAvgCallDuration DisplayString
  friPStatsNumTxCallsSinceLastReset INTEGER
  friPStatsNumTxCallsRejected INTEGER
  friPStatsTxLastCallFailureCause INTEGER
  friPStatsTxLastCalledNumber DisplayString
  friPStatsTxLastCallingNumber DisplayString
  friPStatsTxMinCallDuration DisplayString
  friPStatsTxMaxCallDuration DisplayString
  friPStatsTxAvgCallDuration DisplayString
  friPStatsSignalingState INTEGER

Cdx6500friSGenStatsEntry  
SEQUENCE    
  friSGenStatsPortNumber INTEGER
  friSGenStatsStnNumber INTEGER
  friSStatsStnType INTEGER
  friSStatsStnStatus DisplayString
  friSStatsDLCI INTEGER
  friSStatsStnState DisplayString
  friSStatsConfiguredCIR INTEGER
  friSStatsAllowedInfoRate INTEGER
  friSStatsImpCongDetect INTEGER
  friSStatsExpCongDetect INTEGER
  friSStatsLMIFlowCntrl INTEGER
  friSStatsMaxSVCCount INTEGER
  friSStatsCurrSVCCount INTEGER
  friSStatsMaxPVCCount INTEGER
  friSStatsCurrPVCCount INTEGER
  friSStatsLastStatsReset DisplayString
  friSStatsFrameSegState DisplayString
  friSStatsFrameSegSyncLost INTEGER
  friSStatsPVCState DisplayString
  friSStatsVoiceCongDetect INTEGER
  friSStatsMaxVSVCCount INTEGER
  friSStatsCurrVSVCCount INTEGER

Cdx6500friSDataSummaryStatsEntry  
SEQUENCE    
  friSDataSummStatsPortNumber INTEGER
  friSDataSummStatsStnNumber INTEGER
  friSStatsCharInTotal Counter
  friSStatsCharOutTotal Counter
  friSStatsCharInPerSec INTEGER
  friSStatsCharOutPerSec INTEGER
  friSStatsPktInTotal Counter
  friSStatsPktOutTotal Counter
  friSStatsPktInPerSec INTEGER
  friSStatsPktOutPerSec INTEGER
  friSStatsFrameInTotal Counter
  friSStatsFrameOutTotal Counter
  friSStatsFrameInPerSec INTEGER
  friSStatsFrameOutPerSec INTEGER
  friSStatsUtilIn INTEGER
  friSStatsUtilOut INTEGER
  friSStatsNumPktsQueued INTEGER
  friSStatsPktsDiscardIn INTEGER
  friSStatsPktsDiscardOut INTEGER
  friSStatsPktsQueuedIn INTEGER
  friSStatsPktsQueuedOut INTEGER

Cdx6500friSVoiceSummaryStatsEntry  
SEQUENCE    
  friSVoiceSummStatsPortNumber INTEGER
  friSVoiceSummStatsStnNumber INTEGER
  friSStatsVoiceCharInTotal Counter
  friSStatsVoiceCharOutTotal Counter
  friSStatsVoiceCharInPerSec INTEGER
  friSStatsVoiceCharOutPerSec INTEGER
  friSStatsVoicePktInTotal Counter
  friSStatsVoicePktOutTotal Counter
  friSStatsVoicePktInPerSec INTEGER
  friSStatsVoicePktOutPerSec INTEGER

Cdx6500friSFrameSummaryStatsEntry  
SEQUENCE    
  friSFrameSummStatsPortNumber INTEGER
  friSFrameSummStatsStnNumber INTEGER
  friSStatsInfoFramesInTotal Counter
  friSStatsInfoFramesOutTotal Counter
  friSStatsRRFramesInTotal Counter
  friSStatsRRFramesOutTotal Counter
  friSStatsRNRFramesInTotal Counter
  friSStatsRNRFramesOutTotal Counter
  friSStatsREJFramesInTotal Counter
  friSStatsREJFramesOutTotal Counter
  friSStatsSABMFramesInTotal Counter
  friSStatsSABMFramesOutTotal Counter
  friSStatsDISCFramesInTotal Counter
  friSStatsDISCFramesOutTotal Counter
  friSStatsDMFramesInTotal Counter
  friSStatsDMFramesOutTotal Counter
  friSStatsUAFramesInTotal Counter
  friSStatsUAFramesOutTotal Counter
  friSStatsFRMRFramesInTotal Counter
  friSStatsFRMRFramesOutTotal Counter

Cdx6500friSPacketSummaryStatsEntry  
SEQUENCE    
  friSPktSummStatsPortNumber INTEGER
  friSPktSummStatsStnNumber INTEGER
  friSStatsDataPktInTotal Counter
  friSStatsDataPktOutTotal Counter
  friSStatsRRPktInTotal Counter
  friSStatsRRPktOutTotal Counter
  friSStatsRNRPktInTotal Counter
  friSStatsRNRPktOutTotal Counter
  friSStatsREJPktInTotal Counter
  friSStatsREJPktOutTotal Counter
  friSStatsCallReqPktInTotal Counter
  friSStatsCallReqPktOutTotal Counter
  friSStatsCallAccPktInTotal Counter
  friSStatsCallAccPktOutTotal Counter
  friSStatsClrReqPktInTotal Counter
  friSStatsClrReqPktOutTotal Counter
  friSStatsClrConfPktInTotal Counter
  friSStatsClrConfPktOutTotal Counter
  friSStatsIntrReqPktInTotal Counter
  friSStatsIntrReqPktOutTotal Counter
  friSStatsIntrConfPktInTotal Counter
  friSStatsIntrConfPktOutTotal Counter
  friSStatsResetReqPktInTotal Counter
  friSStatsResetReqPktOutTotal Counter
  friSStatsResetConfPktInTotal Counter
  friSStatsResetConfPktOutTotal Counter
  friSStatsRestartReqPktInTotal Counter
  friSStatsRestartReqPktOutTotal Counter
  friSStatsRestartConfPktInTotal Counter
  friSStatsRestartConfPktOutTotal Counter

Cdx6500friSFRISummaryStatsEntry  
SEQUENCE    
  friSFRISummStatsPortNumber INTEGER
  friSFRISummStatsStnNumber INTEGER
  friSStatsFECNInTotal Counter
  friSStatsFECNOutTotal Counter
  friSStatsBECNInTotal Counter
  friSStatsBECNOutTotal Counter
  friSStatsDEInTotal Counter
  friSStatsDEOutTotal Counter

Cdx6500FRIPContEntry  
SEQUENCE    
  friPContPortNumber INTEGER
  friPContPortControl INTEGER

Cdx6500FRISContEntry  
SEQUENCE    
  friSContPortNumber INTEGER
  friSContStnNumber INTEGER
  friSContStnControl INTEGER

Defined Values

codex 1.3.6.1.4.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 1.3.6.1.4.1.449.2
OBJECT IDENTIFIER    

cdx6500 1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgProtocolGroup 1.3.6.1.4.1.449.2.1.2.1
OBJECT IDENTIFIER    

cdx6500PCTPortProtocolGroup 1.3.6.1.4.1.449.2.1.2.1.1
OBJECT IDENTIFIER    

cdx6500PCTStationProtocolGroup 1.3.6.1.4.1.449.2.1.2.1.3
OBJECT IDENTIFIER    

cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatProtocolGroup 1.3.6.1.4.1.449.2.1.3.1
OBJECT IDENTIFIER    

cdx6500PSTPortProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.1
OBJECT IDENTIFIER    

cdx6500PSTStationProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.3
OBJECT IDENTIFIER    

cdx6500Controls 1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER    

cdx6500PPCTFRIPortTable 1.3.6.1.4.1.449.2.1.2.1.1.31
This table contains Frame Relay DTE Port configuration parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPCTFRIPortEntry

cdx6500PPCTFRIPortEntry 1.3.6.1.4.1.449.2.1.2.1.1.31.1
Entries in the FRI Port Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PPCTFRIPortEntry  

friPCfgPortNumber 1.3.6.1.4.1.449.2.1.2.1.1.31.1.1
Port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friPCfgPortType 1.3.6.1.4.1.449.2.1.2.1.1.31.1.2
Port type of the Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fri(18)  

friPCfgConnectionType 1.3.6.1.4.1.449.2.1.2.1.1.31.1.3
The Specified control signal handshake and clocking required for a connection to be made to this port : simp - simple, no control signals required. dtr - dedicated, require the data terminal ready signal (DTR). simpb - simple, no control signals required for data transmission and reception. By default output leads will be low. nc - Skipped during configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER simp(1), dtr(2), simpb(21), nc(100)  

friPCfgClockSource 1.3.6.1.4.1.449.2.1.2.1.1.31.1.4
int - Internal clock source ext - External clock source. extint - Internal receive and external transmit clock source (DCE only). extlp - external receive and loopback transmit clock source (DTE only). EXTLP must be configured in conjunction with EXTINT. nc - Skipped during configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER int(1), ext(2), extint(3), extlp(4), nc(100)  

friPCfgClockSpeed 1.3.6.1.4.1.449.2.1.2.1.1.31.1.5
This is the speed of the port in bits per second, when using internal clocking. The highest available speed is dependent on the card type, and on the interface type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1200..2048000  

friPCfgHighestStnNumber 1.3.6.1.4.1.449.2.1.2.1.1.31.1.6
This is the highest station number that can be configured on the FRI port. It is used to limit the configuration of stations.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

friPCfgFrameSeqCounting 1.3.6.1.4.1.449.2.1.2.1.1.31.1.7
Port uses normal or extended frame sequence numbering: normal - normal sequencing (modulo 8) extended - extended sequencing (modulo 128). nc - Skipped during configuration. All stations on this port will be set to this value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), extended(2), nc(100)  

friPCfgPktSeqCounting 1.3.6.1.4.1.449.2.1.2.1.1.31.1.8
Port uses normal or extended packet level sequence numbers normal - normal sequencing (modulo 8) extended - extended sequencing (modulo 128) nc - Skipped during configuration. This parameter must be set to the same value at both this FRI port and the remote FRI port. All stations on this port will be set to this value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), extended(2), nc(100)  

friPCfgCntrlProtocolSupport 1.3.6.1.4.1.449.2.1.2.1.1.31.1.9
Whether ANSI T1.617 Annex D, CCITT Q.933 Annex A or LMI Support is enabled. annexD - Annex D is enabled. none - None is enabled. lmi - LMI is enabled. annexA - Annex A is enabled. auto - Auto-learn the Network control protocol type nc - Skipped during configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER annexD(1), none(2), lmi(3), annexA(4), auto(5), nc(100)  

friPCfgHighPriorityStn 1.3.6.1.4.1.449.2.1.2.1.1.31.1.10
This parameter specifies a station who's PVC status has priority over all other stations when FRI same port back up is enabled. When the network reports this DLCI inactive, an alternate connection over a backup link is attempted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

friPCfgMaxVoiceBWBitsPerSec 1.3.6.1.4.1.449.2.1.2.1.1.31.1.11
This parameter limits the bandwidth, in bits per sec (including overhead), for voice traffic passing through this frame relay port. A zero value disables any voice passing through this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2048000  

friPCfgSegSizeVoicePresent 1.3.6.1.4.1.449.2.1.2.1.1.31.1.12
Data packets to be segmented into this maximum frame size when voice is active on this port. segSize32 - 32 byte segments segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments nc - Skipped during configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER segSize32(33), segSize64(65), segSize128(129), segSize256(257), segSize512(513), segSize1024(1025), nc(100)  

friPCfgSegSizeVoiceNotPresent 1.3.6.1.4.1.449.2.1.2.1.1.31.1.13
Data packets to be segmented into this maximum frame size when voice is not active on this port. segSize32 - 32 byte segments segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments segSize2048 - 2048 byte segments segSize4096 - 4096 byte segments disable - segment size is 32768 bytes nc - Skipped during configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER segSize32(33), segSize64(65), segSize128(129), segSize256(257), segSize512(513), segSize1024(1025), segSize2048(2049), segSize4096(4097), disable(32000), nc(100)  

friPCfgT391Timer 1.3.6.1.4.1.449.2.1.2.1.1.31.1.14
This parameter is the Link Integrity Verification Timer polling period. The FRI port sends status enquiry messages to network every T391/nT1 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

friPCfgT392Timer 1.3.6.1.4.1.449.2.1.2.1.1.31.1.15
This parameter is the polling Cycle Verification Timer period. The FRI port expects status enquiry messages every T392/nT2 seconds. This parameter must be set to a value greater than N391/nT1, and applies only in bi-directional mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..30  

friPCfgN391PollCycle 1.3.6.1.4.1.449.2.1.2.1.1.31.1.16
Full Status polling cycle. FRI port sends Full status enquiry messages to network every nN1 polls.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

friPCfgN392ErrsDuringMonitoredEvents 1.3.6.1.4.1.449.2.1.2.1.1.31.1.17
Error inactivity threshold. Number of errors during NN3 events that cause the station to be declared inactive. Should be less than or equal to nN3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

friPCfgN393MonitoredEvents 1.3.6.1.4.1.449.2.1.2.1.1.31.1.18
Monitored events count for measuring nN3. nN2 errors during nN3 events will cause the station to be declared inactive. Should be greater than nN3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

friPCfgNT1PollTimer 1.3.6.1.4.1.449.2.1.2.1.1.31.1.19
This parameter is the Link Integrity Verification Timer polling period. The FRI port sends status enquiry messages to network every T391/nT1 seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 5..30  

friPCfgNT2VerificationTimer 1.3.6.1.4.1.449.2.1.2.1.1.31.1.20
This parameter is the polling Cycle Verification Timer period. The FRI port expects status enquiry messages every T392/nT2 seconds. This parameter must be set to a value greater than N391/nT1, and applies only in bi-directional mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 5..30  

friPCfgNN1StatusPollingCycle 1.3.6.1.4.1.449.2.1.2.1.1.31.1.21
Full Status polling cycle. FRI port sends Full status enquiry messages to network every nN1 polls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPCfgNN2ErrsDuringMonitoredEvents 1.3.6.1.4.1.449.2.1.2.1.1.31.1.22
Error inactivity threshold. Number of errors during NN3 events that cause the station to be declared inactive. Should be less than or equal to nN3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPCfgNN3MonitoredEvents 1.3.6.1.4.1.449.2.1.2.1.1.31.1.23
Monitored events count for measuring nN3. nN2 errors during nN3 events will cause the station to be declared inactive. Should be greater than nN3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPCfgInvertTXClock 1.3.6.1.4.1.449.2.1.2.1.1.31.1.24
This parameter specifies whether the phase of the transmit clock should be inverted. Note: This parameter is primarily for X.21 electrical interfaces. no - Don't invert. yes - Invert.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2), nc(100)  

friPCfgControlProtocolOptions 1.3.6.1.4.1.449.2.1.2.1.1.31.1.25
These options control the PVC management protocol none - No option selected async - The port will send/receive asynchronous A-bit if it is performing Network side protocol functionality nbit - The port will send and accept N-bit messages dbit - The port will send and accept D-bit messages This forces ASYNC to be specified (dbit+async) dte-only - This forces a DTE Interface Type to remain as DTE, suppressing changes to BI-DIR using Annex A or D
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..24)  

friPCfgDiscardControlOptions 1.3.6.1.4.1.449.2.1.2.1.1.31.1.26
This parameter controls the discard frame options none - No option selected debit - DE marked frames are discarded before non-DE frames
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), debit(2)  

friPCfgStartSvcDlci 1.3.6.1.4.1.449.2.1.2.1.1.31.1.27
The configured number is the lowest value DLCI the FRI port will allow for use of FR SVCs. A value of 0 means SVC procedures are not operating on this port and the signalling channel will not be active.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

friPCfgSubscriberNumber 1.3.6.1.4.1.449.2.1.2.1.1.31.1.28
All stations on this port use this value for their calling address information element. The valid format of this entry is: xx...xx000101 or xx...xx000103 Where: xx...xx00 represents the address of the station in IA5/ASCII coded hex terminated with a NUL character suffix. For example, an address of 123 would be represented by the string 31323300. 0101 is the suffix used to specify E.164 Number Plan 0103 is the suffix used to specify X.121 Number Plan To send a call without the Subscriber Number IE, set the address string to NUL only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3..19)  

friPCfgMaxFmif 1.3.6.1.4.1.449.2.1.2.1.1.31.1.29
This is the value used for link layer core parameters information element negotiation of maximum frame mode information field (FRIF) size in bytes. The value applies to both inbound and outbound frames. The value is specified in outgoing SETUP messages and is the maximum accepted value on incoming SETUP messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 262..4096  

friPCfgT200 1.3.6.1.4.1.449.2.1.2.1.1.31.1.30
This is the value in tenths of seconds (1/10 s) of the maximum time the DTE will wait for an acknowledgment of a transmitted Information frame. The DTE will continue retransmissions at an interval of T200 until the tries count expires or proper acknowledgment is received from the attached equipment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

friPCfgN200 1.3.6.1.4.1.449.2.1.2.1.1.31.1.31
This is the maximum number of times the DTE will retransmit in order to recover from a T200 timeout condition. If this count expires, the DTE will declare the LAPF link to be down and initiate link establishment procedures.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

friPCfgWindowK 1.3.6.1.4.1.449.2.1.2.1.1.31.1.32
This is the maximum sending window size which is the maximum number (k) of sequentially numbered I frames that may be outstanding (unacknowledged) at any given time. The recommended values are: Line speed (kbps) Window, k ----------------- -------------- less than 16 3 greater than 16 7
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

friPCfgT203 1.3.6.1.4.1.449.2.1.2.1.1.31.1.33
The idle timer (T203) represents the maximum time in seconds allowed without frames being exchanged. If the link remains idle for this period of time, the DTE will send a supervisory frame with the poll bit set. A value of zero disables this timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

friPCfgT303 1.3.6.1.4.1.449.2.1.2.1.1.31.1.34
The Setup Timer (T303) represents the maximum time in seconds allowed without a response to a SETUP message being received. Upon expiry, the SETUP message is retransmitted and the timer is restarted. The second expiry of the timer will cause the call to be cleared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

friPCfgT305 1.3.6.1.4.1.449.2.1.2.1.1.31.1.35
The Disconnect Timer (T305) represents the maximum time in seconds allowed without a response to a DISCONNECT message being received. Upon expiry, a RELEASE message is sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

friPCfgT308 1.3.6.1.4.1.449.2.1.2.1.1.31.1.36
The Release Timer (T308) represents the maximum time in seconds allowed without a response to a RELEASE message being received. Upon expiry, the RELEASE message is retransmitted and the timer is restarted. The second expiry of the timer will cause the call to be cleared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

friPCfgT310 1.3.6.1.4.1.449.2.1.2.1.1.31.1.37
The Call Proceeding Timer (T310) value is in seconds. This timer is started when a CALL PROCEEDING response to a SETUP message is received. The timer is stopped when a CONNECT or DISCONNECT or RELEASE message is received. If the timer expires, the call will be cleared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

friPCfgControlProtocol 1.3.6.1.4.1.449.2.1.2.1.1.31.1.38
This option controls whether the PVC management protocol acts like a DTE or a DCE DTE - This ports takes on the the DTE or User Side role DCE - This ports takes on the the DCE or Network Side role
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dte(1), dce(2)  

friPCfguniState 1.3.6.1.4.1.449.2.1.2.1.1.31.1.39
Enable FRF.12 UNI Segmentation. Peer must be enabled too. enable - Enable UNI Segmentation disable - Disable UNI Segmentation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

friPCfguniSSVP 1.3.6.1.4.1.449.2.1.2.1.1.31.1.40
UNI segment size when voice is present. Affects transmit path only. segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER segSize64(65), segSize128(129), segSize256(257), segSize512(513), segSize1024(1025)  

friPCfguniSSVNP 1.3.6.1.4.1.449.2.1.2.1.1.31.1.41
UNI segment size when voice is not present. Affects transmit path only. segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments segSize2048 - 2048 byte segments segSize4096 - 4096 byte segments disable - this selection doesn't affect the packet size. UNI segmentation header will be inserted only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER segSize64(65), segSize128(129), segSize256(257), segSize512(513), segSize1024(1025), segSize2048(2049), segSize4096(4097), disable(32000)  

friPCfguniSegDelay 1.3.6.1.4.1.449.2.1.2.1.1.31.1.42
Discards a packet if any segment delays more than 10 seconds. Affects receive path only. enabled - discard the packet disabled - do not discard the packet
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

friPCfguniCheckPckSize 1.3.6.1.4.1.449.2.1.2.1.1.31.1.43
Check if the packet size is larger than the node maximum packet size. enabled - discard packet than is larger than the maximum size. disabled - accept packet than is larger than the maximum size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

friPCfgElectricalInterfaceType 1.3.6.1.4.1.449.2.1.2.1.1.31.1.44
Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v24(1), v35(2), v36(3), x21(4), none(5)  

friPCfgV24ElectricalInterfaceOption 1.3.6.1.4.1.449.2.1.2.1.1.31.1.45
Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ri(1), tm(2)  

friPCfgHighSpeedElectricalInterfaceOption 1.3.6.1.4.1.449.2.1.2.1.1.31.1.46
Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), xover(2)  

cdx6500SPCTFRIStationTable 1.3.6.1.4.1.449.2.1.2.1.3.9
This table contains Frame Relay DTE Station configuration parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500SPCTFRIStationEntry

cdx6500SPCTFRIStationEntry 1.3.6.1.4.1.449.2.1.2.1.3.9.1
Entries in the FRI Station Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500SPCTFRIStationEntry  

friSCfgPortNumber 1.3.6.1.4.1.449.2.1.2.1.3.9.1.1
The FRI port number corresponding to this station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friSCfgStnNumber 1.3.6.1.4.1.449.2.1.2.1.3.9.1.2
The number of the configured FRI Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

friSCfgStnType 1.3.6.1.4.1.449.2.1.2.1.3.9.1.3
Identifies the type of station configured. annexG - This station uses X.25 signaling for layer 3. bypass - This station type bypasses layer 3. There is no signaling for SVC's on this station. voiceRelay - Not used in the current version.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER annexG(1), bypass(2), voiceRelay(3)  

friSCfgDLCI 1.3.6.1.4.1.449.2.1.2.1.3.9.1.4
The Data Link Connection Identifier (DLCI) is the unique identifier for the station on the FRI Port. Its valid range is 0, 16 - 1007. A zero value in this field places the FRI station in DLCI auto-learn mode. In auto learn mode, the station is eligible for automatic assignment of an available network DLCI. A configured value of 16-1007 must match a DLCI on the FR networking node. NOTE: When a station record is configured for the first time, the DLCI prompt displays an auto-incrementing DLCI value. The DLCI's start from 16 for station 1, and increment by one for each station configured. If the station record is not saved to memory, a default DLCI value of zero is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

friSCfgCommInfoRate 1.3.6.1.4.1.449.2.1.2.1.3.9.1.5
This parameter (CIR) specifies the rate (in bits-per-second) that the Frame Relay network agrees to transfer information under congested conditions for the FRI Station. This value is used to throttle data on the FRI station for congestion control purposes. The CIR cannot be greater than the link speed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2048000  

friSCfgCommBurstSize 1.3.6.1.4.1.449.2.1.2.1.3.9.1.6
This parameter (BC) specifies the maximum amount of data (in bits) that the Frame Relay network agrees to transfer over a time interval T = Committed Burst Size / Committed Information Rate.This must be greater than 1/20th of the Committed Information Rate.This is used for congestion control purposes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..768000  

friSCfgTransDelay 1.3.6.1.4.1.449.2.1.2.1.3.9.1.7
This parameter is the expected one-way delay through the network. This is specified in milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

friSCfgCongControlMode 1.3.6.1.4.1.449.2.1.2.1.3.9.1.8
This parameter controls the method of congestion control: normal - congestion control is normal disable - never enter Congested State (CTRL) congested - never enter a Non-Congested State (UCTRL) limit - congestion control is normal but limits the data rate to no lower than CIR. nc - Skipped during configuration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), disable(2), congested(3), limit(4), nc(100)  

friSCfgLinkAddress 1.3.6.1.4.1.449.2.1.2.1.3.9.1.9
The logical link address must be set to complementary values in this FRI Station and its corresponding remote FRI station: dte - station to have logical DTE address (A) dce - station to have logical DCE address (B) nc - Skipped during configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dte(1), dce(2), nc(100)  

friSCfgPVCChannels 1.3.6.1.4.1.449.2.1.2.1.3.9.1.10
Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a station (logical link) should be kept as small as possible and consistent with needs. PVC connections must be configured in the PVC Table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

friSCfgStartingPVC 1.3.6.1.4.1.449.2.1.2.1.3.9.1.11
This is the starting logical channel number for the Permanent Virtual Circuits on this FRI station. Not used if the number of PVCs = 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4095  

friSCfgSVCChannels 1.3.6.1.4.1.449.2.1.2.1.3.9.1.12
Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a station (logical link) should be kept as small as possible and consistent with needs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..512  

friSCfgStartingSVC 1.3.6.1.4.1.449.2.1.2.1.3.9.1.13
This is the starting logical channel number for the switched Virtual Circuits on this station (logical link). Not used if the number of SVCs = 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

friSCfgVoiceSVCChannels 1.3.6.1.4.1.449.2.1.2.1.3.9.1.14
Number of logical voice channels used in Switched Virtual Circuits.The total number of voice and data channels on a station (logical link) should be kept as small as possible and consistent with needs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

friSCfgInitialFrame 1.3.6.1.4.1.449.2.1.2.1.3.9.1.15
Specify the initial frame required by other end for (logical) link startup: none - do nothing (other end initiates link-up) sabm - send SABM disc - send DISC, then SABM nc - Skipped during configuration
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sabm(1), disc(2), none(3), nc(100)  

friSCfgT1RetryTimer 1.3.6.1.4.1.449.2.1.2.1.3.9.1.16
T1 link retry timer value in tenths of a second (e.g. 30 = 3.0 seconds).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

friSCfgT4PollTimer 1.3.6.1.4.1.449.2.1.2.1.3.9.1.17
This sets the time an idle link is probed for assurance of connection to the remote FRI station. 0 - disable the timer X - X is in tenths of a second (e.g. 40 = 4.0 seconds) and must be set greater than T1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..255  

friSCfgN2TransmissionTries 1.3.6.1.4.1.449.2.1.2.1.3.9.1.18
The maximum number of attempts allowed to complete a transmission.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

friSCfgKFrameWindow 1.3.6.1.4.1.449.2.1.2.1.3.9.1.19
Frame level window size must be set to the same value at both this FRI station and the remote FRI station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..63  

friSCfgWPacketWindow 1.3.6.1.4.1.449.2.1.2.1.3.9.1.20
Packet level window size must be set to the same value at both this FRI station and the remote FRI station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..63  

friSCfgPPacketSize 1.3.6.1.4.1.449.2.1.2.1.3.9.1.21
This is the maximum X.25 packet size used on the station (logical link).For proper operation, this must be set to the same value at both this FRI station and the remote FRI station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER psize32(6), psize64(7), psize128(8), psize256(9), psize512(10), psize1024(11), nc(100)  

friSCfgDataQUpperThreshold 1.3.6.1.4.1.449.2.1.2.1.3.9.1.22
This is the maximum number of data packets a channel on this station (logical link) will queue for transmission before invoking flow control to the attached channel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

friSCfgDataQLowerThreshold 1.3.6.1.4.1.449.2.1.2.1.3.9.1.23
This is the number of data packets a channel on this FRI station will have queued for transmission when it releases flow control to the attached channel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

friSCfgRestartTimer 1.3.6.1.4.1.449.2.1.2.1.3.9.1.24
Restart-Request timeout timer in seconds. If timer expires on this FRI station, the Restart request is sent again.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..255  

friSCfgResetTimer 1.3.6.1.4.1.449.2.1.2.1.3.9.1.25
Reset-Request timeout timer in seconds. If timer expires on this FRI station, the Reset request is sent again.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..255  

friSCfgCallTimer 1.3.6.1.4.1.449.2.1.2.1.3.9.1.26
Call-Request timeout timer in seconds. If timer expires on this FRI station, the call is cleared.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..255  

friSCfgClearTimer 1.3.6.1.4.1.449.2.1.2.1.3.9.1.27
Clear-Request timeout timer in seconds. If timer expires on this FRI station, the Clear request is sent again.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..255  

friSCfgX25Options 1.3.6.1.4.1.449.2.1.2.1.3.9.1.28
Select X.25 options on this station (logical link) as follows: NONE - no option specified CUG - check closed user group; otherwise, CUG passes transparently CAUSE - pass cause, diagnostic, code in outbound packets HOLD - hold calls over link restart INL - inter-node link. Link goes to another vanguard device INL may be a poor choice for high speed links. INLB is set with INL to improve performance of high speed links. INLB - set with INL options to improve performance if inter-node link is a high speed link. DELAY - Enable Delay and Path Trace on this link Any combination of above specified by summing (e.g. CUG+ CAUSE+....).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..24)  

friSCfgRestrictedConnDest 1.3.6.1.4.1.449.2.1.2.1.3.9.1.29
All calls entering this station will be routed to the destination specified in this parameter,irrespective of route selection table entries. For example, to route all calls to X.25 port 3, use X25-3. To route calls to SDLC port 2, station 4, use SDLC-2S4. Blank in this field disables this function.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

friSCfgCUGMembership 1.3.6.1.4.1.449.2.1.2.1.3.9.1.30
The station may be a member of up to 8 different Closed User Groups (CUGs).Each CUG membership must be a two digit number (except --) and separated by a comma. ( e.g. 12,34,56,09,02, 03). -- - No CUG Membership 00-99 - CUG Membership
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..23)  

friSCfgBillingRecords 1.3.6.1.4.1.449.2.1.2.1.3.9.1.31
This controls whether billing (accounting) records will be created for calls on this FRI station. off - Billing records will not be created. on - Billing records will be created. nc - Skipped during configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2), nc(100)  

friSCfgFrameSegmenter 1.3.6.1.4.1.449.2.1.2.1.3.9.1.32
Determine if this station will support the Frame Segmenter Header.The Frame Segmenter should be enabled if the frame relay port is configured to pass voice traffic. disabled - Frame Segmenter disabled. enabled - Frame Segmenter enabled. nc - Skipped during configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), nc(100)  

friSCfgVoiceCongCtrlMode 1.3.6.1.4.1.449.2.1.2.1.3.9.1.33
This parameter controls the method of voice congestion control: enabled - Station is forced into congestion when voice calls are detected. disabled - Station operates normally Use this parameter in voice applications, when the frame relay network can have more than 140ms of data buffered. One typical application is asymmetrical speeds. When this parameter is enabled, and voice is detected, delta T is forced to 50 ms and the BC is forced to 1/20 CIR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), nc(100)  

friSCfgPeakUtilization 1.3.6.1.4.1.449.2.1.2.1.3.9.1.34
The monitoring interval size specifies the time period to use when monitoring peak data link/CIR (Committed Information Rate) utilization. 0 - Disables this monitoring feature. 1 to 240 - The number of 64 second increments to use for the monitoring interval time period. For example: a value of 30 specifies a time duration equal to 30 * 64 seconds = 1920 seconds or 32 minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..240  

friSCfgMaxInboundQueue 1.3.6.1.4.1.449.2.1.2.1.3.9.1.35
This specifies the maximum number of frames from the network which may be queued in a BYPASS station. A smaller value may ve choosen for applications which experience objectable delays, if due to excessive growth of the BYPASS inbound queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 100..2500  

friSCfgAnnexGRateReduction 1.3.6.1.4.1.449.2.1.2.1.3.9.1.36
This parameter determines whether Annex G stations will invoke implicit congestion control when a link error is detected, reducing their transmitted information rate to 1/4 CIR. The rate will be gradually increased in the normal way as non-BECN frames are received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), nc(100)  

friSCfgCctType 1.3.6.1.4.1.449.2.1.2.1.3.9.1.37
Select the station circuit type defined for the Frame Relay line. pvc - station will operate on its assigned DLCI as a PVC. svc - station will operate on a selected DLCI as a SVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

friSCfgCallControl 1.3.6.1.4.1.449.2.1.2.1.3.9.1.38
This parameter is used to control the calling behavior of the SVC station. auto - the station will automatically initiate a FR SVC call on power up autd - the station will initiate a FR SVC call on demand of data to transmit recv - the station can be used to receive inbound FR SVC calls from attached network equipment cnorm - Controlled Normal. This allows Annex G stations to set up and disconnect Frame Relay SVC calls through Network Services
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), autd(2), recv(3), cnorm(4)  

friSCfgRetryInterval 1.3.6.1.4.1.449.2.1.2.1.3.9.1.39
This is the time interval between call attempts, in seconds, that a station configured to initiate an SVC call will use. If a call attempt fails, either because there was no response to the SETUP message or the response was a RELEASE, the station will wait this amount of time before sending the next SETUP message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

friSCfgCallAttempts 1.3.6.1.4.1.449.2.1.2.1.3.9.1.40
This is the number of contiguous call attempts that a station configured to initiate an SVC call will make to establish the call. If this count expires, the station will not make any further call attempts. A station (or port or node) boot is required to re-initiate call attempts. A value of 0 means the station makes call attempts indefinitely.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

friSCfgIdleInterval 1.3.6.1.4.1.449.2.1.2.1.3.9.1.41
This is the idle time, in seconds, allowed for FRI station to remain idle. If the station using the SVC passes no data for this time period, the SVC will be cleared. If the SVC is cleared and the stations attempts to send data an SVC will be established for the station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..255  

friSCfgIeNegotiation 1.3.6.1.4.1.449.2.1.2.1.3.9.1.42
This allows the listing of parameters to be used in a SETUP/CONNECT message. dlci - If the station initiates a call, it will select the lowest value of DLCI available and specify it to be used for the SVC. llcp - If the station initiates a call it specifies a full set of Link Layer Core Parameters. If it receives a call LLCP is used to set CIR and BC. tpie - If set, the station will send a Traffic Priority IE. The value of the TP IE is determined by the application that causes the call to be made. This parameter is only effective on stations configured for CNORM Call Control. Any combination of above specified by summing (DLCI+LLCP).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

friSCfgSubaddress 1.3.6.1.4.1.449.2.1.2.1.3.9.1.43
This specifies the station subaddress coded and an IE. it is coded as an IA5 string with type of subaddress NSAP and IA5 AFI prefix added. Incoming calls with a called subaddress of NSAP type and IA5 AFI prefix that match this configured string will connect to this station. If this parameter is blank, the corresponding IE is not sent on outgoing calls. Incoming calls without the corresponding IE can connect to this station. The valid format of this entry is: xx...xx000000 or xx...xx000000 Where: xx...xx00 represents the station number in IA5/ASCII coded hex terminated with a NUL character suffix. For example, a sub-address of 12 would be represented by the string 313200. To set the subaddress blank, set the address string to NUL only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3..6)  

friSCfgCalledNumber 1.3.6.1.4.1.449.2.1.2.1.3.9.1.44
This is the address of the destination, in the appropriate numbering plan, to which a call will be placed by this station. Called Party Number is a manditory IE and should be specified if calls are originated by this station. The valid format of this entry is: xx...xx000101 or xx...xx000103 Where: xx...xx00 represents the address of the destination in IA5/ASCII coded hex terminated with a NUL character suffix. For example, an address of 123 would be represented by the string 31323300. 0101 is the suffix used to specify E.164 Number Plan 0103 is the suffix used to specify X.121 Number Plan
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3..19)  

friSCfgCalledSubaddress 1.3.6.1.4.1.449.2.1.2.1.3.9.1.45
For outgoing calls, this specifies the calling subaddress IE coded as an IA5 string with type of subaddress NSAP and IA5 AFI prefix added. Incoming calls with a called subaddress of NSAP type and IA5 AFI prefix that match this configured string will connect to this station. If this parameter is blank, the corresponding IE is not sent on outgoing calls. Incoming calls without the corresponding IE can connect to this station. The valid format of this entry is: xx...xx000000 or xx...xx000000 Where: xx...xx00 represents the station number in IA5/ASCII coded hex terminated with a NUL character suffix. For example, a sub-address of 12 would be represented by the string 313200. To set the subaddress blank, set the address string to NUL only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3..6)  

friSCfgMinCir 1.3.6.1.4.1.449.2.1.2.1.3.9.1.46
This parameter specifies the minimum rate (in bits-per-second) that the Frame Relay network agrees to transfer information under congested conditions for the FRI Station. This value is used to throttle data on the FRI station for congestion control purposes. The MinCIR cannot be greater than the link speed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..155000000  

friSCfgBurstExcess 1.3.6.1.4.1.449.2.1.2.1.3.9.1.47
This parameter is negotiated during the call establishment phase of Frame Relay SVC calls. It has no effect on data transfer after the call has been established.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4096000  

friSCfgE2EEnabled 1.3.6.1.4.1.449.2.1.2.1.3.9.1.48
Enable End-to-End Segmentation. Peer must be enabled too. enabled - Enable End-to-End Segmentation disabled - Disable End-to-End Segmentation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

friSCfgE2EType 1.3.6.1.4.1.449.2.1.2.1.3.9.1.49
Type of End-to-End Segmentation. Peer must be configured in the same way. FRF12 - FRF.12 End-to-End Segmentation Motorola - Motorola End-to-End Segmentation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER motorola(1), frf12(2)  

friSCfgE2ESSVP 1.3.6.1.4.1.449.2.1.2.1.3.9.1.50
Segment size when voice is present. Affects transmit path only. segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER segSize64(65), segSize128(129), segSize256(257), segSize512(513), segSize1024(1025)  

friSCfgE2ESSVNP 1.3.6.1.4.1.449.2.1.2.1.3.9.1.51
Segment size when voice is not present. Affects transmit path only. segSize64 - 64 byte segments segSize128 - 128 byte segments segSize256 - 256 byte segments segSize512 - 512 byte segments segSize1024 - 1024 byte segments segSize2048 - 2048 byte segments segSize4096 - 4096 byte segments disable - this selection doesn't affect the packet size. End-to-End segmentation header will be inserted only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER segSize64(65), segSize128(129), segSize256(257), segSize512(513), segSize1024(1025), segSize2048(2049), segSize4096(4097), disable(32000)  

friSCfgE2ESegDelayEnabled 1.3.6.1.4.1.449.2.1.2.1.3.9.1.52
Discards a packet if any segment delays more than 10 seconds. Affects receive path only. enabled - discard the packet disabled - do not discard the packet
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

friSCfgE2ECheckPckSize 1.3.6.1.4.1.449.2.1.2.1.3.9.1.53
Check if the packet size is larger than the node maximum packet size. enabled - discard packet than is larger than the maximum size. disabled - accept packet than is larger than the maximum size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

friSCfgvoice-header 1.3.6.1.4.1.449.2.1.2.1.3.9.1.54
Voice Header. enabled - Enable Voice Header Insertion disabled - Disable Voice Header Insertion
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

cdx6500PPSTFRIPStatsTable 1.3.6.1.4.1.449.2.1.3.1.1.32
OBJECT IDENTIFIER    

cdx6500PPSTFRIPortTable 1.3.6.1.4.1.449.2.1.3.1.1.32.1
This table contains FRI Port Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPSTFRIPortEntry

cdx6500PPSTFRIPortEntry 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1
Entries in the FRI Port Statistics Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PPSTFRIPortEntry  

friPStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.1
The port number of the FRI port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friPStatsPortType 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.2
Port type of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fri(17)  

friPStatsPortStatus 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.3
Specifies the current port status. enabled - Port is operational. disabled - Port has been disabled. busyOut - Port has been busied out. up - Port is up and operational. down - Port is down. na - Value not Available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), busyOut(3), up(4), down(5), na(100)  

friPStatsConfiguredStns 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.4
A list of all the configured stations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsPortSpeed 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.5
Message transmission speed in bits per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsOpCntrlProtocol 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.6
Control Protocol type learned from network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsSPBackup 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.7
This indicates whether the same port backup is configured for this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsPriorityStn 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.8
This specifies the high priority station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsLastStatsReset 1.3.6.1.4.1.449.2.1.3.1.1.32.1.1.9
This indicates the time stamp of the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500PPSTFRIDataSummaryTable 1.3.6.1.4.1.449.2.1.3.1.1.32.2
This table contains FRI Port Data Summary Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPSTFRIDataSummaryEntry

cdx6500PPSTFRIDataSummaryEntry 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1
Entries in the FRI Port Data Summary Statistics Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PPSTFRIDataSummaryEntry  

friDataSummPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.1
The port number of the FRI port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friPStatsCharInTotal 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.2
Number of characters received since last boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friPStatsCharOutTotal 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.3
Number of characters transmitted since last boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friPStatsCharInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.4
Average number of characters received per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsCharOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.5
Average number of characters transmitted per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.6
Number of frames received since last boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friPStatsFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.7
Number of frames transmitted since last boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friPStatsFramesInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.8
Average number of frames received per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsFramesOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.9
Average number of frames transmitted per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsAvFrameSizeIn 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.10
Average frame size of received frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsAvFrameSizeOut 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.11
Average size of transmitted frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsUtilIn 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.12
Port Utilization of incoming data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsUtilOut 1.3.6.1.4.1.449.2.1.3.1.1.32.2.1.13
Port Utilization of outgoing data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500PPSTFRISummaryTable 1.3.6.1.4.1.449.2.1.3.1.1.32.3
This table contains FRI Summary Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPSTFRISummaryEntry

cdx6500PPSTFRISummaryEntry 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1
Entries in the FRI Summary Statistics Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PPSTFRISummaryEntry  

friSummPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.1
The port number of the FRI port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friPStatsCRCErrors 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.2
Number of errors detected by Cyclic Redundancy Check since last node boot or reset of statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friPStatsOverrunErrors 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.3
Number of OverrunErrors detected since last node boot or reset of statistics.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friPStatsFrameLengthErrors 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.4
Number of Frame Length Errors detected since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friPStatsUnderrunErrors 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.5
Number of Underrun Errors detected since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friPStatsUnknownDLCICount 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.6
This specifies the number of DLCIs not recognized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friPStatsLastUnknownDLCI 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.7
This specifies the last unknown dlci received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsSplittingRatio 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.8
The Frame Segmenter's splitting ratio calculated as a percentage of Number of frames segmented/Number of frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsTotalSegmentsLost 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.9
Total Segments lost by Frame Segmenter Receiver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsMaxContiguousSegmentsLost 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.10
Maximum consecutive segments lost by Farme Segmenter Receiver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsVoiceBWOnPort 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.11
Current amount of voice bandwidth allocated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsFrameSegmenterSyncLost 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.12
Total number of times synchronization has been lost.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsStatusEnqSentFull 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.13
Number of status enquiries SENT FULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsFullStatusRecd 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.14
Number of full status received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsStatusEnqSentLIV 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.15
Number of status enq sent LIV.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsLIVStatusRecd 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.16
Number of status update received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsStatusEnqRecdFull 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.17
Number of Full status enq RCV bi-directional mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsStatusEnqRecdLIV 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.18
Number of LIV status enq RCV bi-directional mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsAsyncUpdateRecd 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.19
Number of async update received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsSeqNumMismatch 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.20
Number of Sequence Number Mismatches occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsTimeouts 1.3.6.1.4.1.449.2.1.3.1.1.32.3.1.21
Number of timeouts occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500PPSTFRIISDNCallStatusTable 1.3.6.1.4.1.449.2.1.3.1.1.32.4
This table contains FRI ISDN Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPSTFRIISDNCallStatusEntry

cdx6500PPSTFRIISDNCallStatusEntry 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1
Entries in the FRI ISDN Statistics Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PPSTFRIISDNCallStatusEntry  

friISDNCallStatusPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.1
The port number of the FRI Port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friPStatsNumRxCallsSinceLastReset 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.2
The number of inbound calls that were attempted since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsNumRxCallsRejected 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.3
The number of inbound calls that were rejected since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsRxLastCallFailureCause 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.4
The reason the last inbound call was rejected, since the last statistics reset. The posssible values are: noFailureReported - No call failure noAvailableVirtualPort - No virtual port available securityViolation - Password security failed noResourcesAvailable - No resources available callRejected - Call failed by Xircom card invalidPhoneNumber - Phone number is incorrect outgoingCallRequestTimeout - Outgoing call request timed out callCollision - Call collision virtualPortNotAvailable - This port is not available invalidConfiguration - Configuration is incorrect failureNotSupported - Failure is not supported na - Value Not Available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noFailureReported(193), noAvailableVirtualPort(194), securityViolation(195), noResourcesAvailable(196), callRejected(197), invalidPhoneNumber(198), outgoingCallRequestTimeout(199), callCollision(200), virtualPortNotAvailable(201), invalidConfiguration(202), failureNotSupported(203), na(100)  

friPStatsRxLastCalledNumber 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.5
The phone number of the virtual port of the last ISDN call made into this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsRxLastCallingNumber 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.6
The phone number of last party to make an ISDN call into this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsRxMinCallDuration 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.7
The minimum call duration of all inbound ISDN calls made into this port, since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsRxMaxCallDuration 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.8
The maximum call duration of all inbound ISDN calls made into this port, since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsRxAvgCallDuration 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.9
The average call duration of all inbound ISDN calls made into this port, since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsNumTxCallsSinceLastReset 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.10
The number of outbound calls that were attempted since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsNumTxCallsRejected 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.11
The number of outbound calls that were rejected since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friPStatsTxLastCallFailureCause 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.12
The reason the last outbound call was rejected, since the last statistics reset. The posssible values are: noFailureReported - No call failure noAvailableVirtualPort - No virtual port available securityViolation - Password security failed noResourcesAvailable - No resources available callRejected - Call failed by Xircom card invalidPhoneNumber - Phone number is incorrect outgoingCallRequestTimeout - Outgoing call request timed out callCollision - Call collision virtualPortNotAvailable - This port is not available invalidConfiguration - Configuration is incorrect failureNotSupported - Failure is not supported na - Value Not Available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noFailureReported(193), noAvailableVirtualPort(194), securityViolation(195), noResourcesAvailable(196), callRejected(197), invalidPhoneNumber(198), outgoingCallRequestTimeout(199), callCollision(200), virtualPortNotAvailable(201), invalidConfiguration(202), failureNotSupported(203), na(100)  

friPStatsTxLastCalledNumber 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.13
The phone number of the last ISDN call made by a virtual port from this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsTxLastCallingNumber 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.14
The phone number of the virtual port that made the last ISDN call from this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsTxMinCallDuration 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.15
The minimum call duration of all outbound ISDN calls made from this port, since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsTxMaxCallDuration 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.16
The maximum call duration of all outbound ISDN calls made from this port, since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsTxAvgCallDuration 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.17
The average call duration of all outbound ISDN calls made from this port, since the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friPStatsSignalingState 1.3.6.1.4.1.449.2.1.3.1.1.32.4.1.18
ISDN call signaling state. The possible values are: idle - No ISDN call present. ringing - Pending outgoing ISDN call request. connected - ISDN call is connected. congested - Congested mode. disabled - Virtual Port is disabled. dChannelDown - D-channel is down. disabledDChannelDown - Disabled and D-channel is down. disconnecting - Pending ISDN call disconnection. na - Value not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), ringing(2), connected(3), congested(4), disabled(5), dChannelDown(6), disabledDChannelDown(7), disconnecting(8), na(100)  

cdx6500SPSTFRISStatsTable 1.3.6.1.4.1.449.2.1.3.1.3.10
OBJECT IDENTIFIER    

friSGenStatsTable 1.3.6.1.4.1.449.2.1.3.1.3.10.1
This table contains FRI Station Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500friSGenStatsEntry

cdx6500friSGenStatsEntry 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1
Entries in the FRI Station Statistics Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500friSGenStatsEntry  

friSGenStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.1
The FRI port number corresponding to this station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friSGenStatsStnNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.2
The number of the FRI Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

friSStatsStnType 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.3
annex G - Annex G station type. bypass - bypass station type. voice - voice station type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER annexG(1), bypass(2), voice(3)  

friSStatsStnStatus 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.4
Status of the station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friSStatsDLCI 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.5
Data Link Connection Identifier is the unique identifier for the station on the FRI port and must match the DLCI configured on the Frame Relay networking node. The DLCI is 0 in Auto-Learning mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsStnState 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.6
Specifies the state of the station : unused - station is unconfigured/disabled uncontrolled - station is not controlled. controlled - station is controlled, congestion detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friSStatsConfiguredCIR 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.7
Committed Information Rate in bits per second : Value of this parameter is 0 for Bypass stations (not available).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsAllowedInfoRate 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.8
Allowed information rate is the link speed if uncongested, 0 if unused and the current desired information rate if congested. Value of this parameter is also 0 for Bypass stations (not available).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsImpCongDetect 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.9
Number of times implicit congestion procedures have been invoked.Value of this parameter is 0 for Bypass stations (not available).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsExpCongDetect 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.10
Number of times explicit congestion procedures have been invoked.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsLMIFlowCntrl 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.11
This indicates the flow status, whether OFF or ON. na - Value not available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2), na(100)  

friSStatsMaxSVCCount 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.12
Maximum number of SVCs available in the network. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsCurrSVCCount 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.13
Number of SVCs currently in use. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsMaxPVCCount 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.14
Maximum number of async pvc channels. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsCurrPVCCount 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.15
Current number of async pvc channels. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsLastStatsReset 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.16
This indicates the time stamp of the last statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friSStatsFrameSegState 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.17
State of the Frame segmenter receiver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friSStatsFrameSegSyncLost 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.18
Total number of segments lost by Frame Segmenter Receiver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsPVCState 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.19
Current state of the PVC. Value of this parameter is not available for stations other than Bypass Stations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

friSStatsVoiceCongDetect 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.20
Number of times voice congestion procedures have been invoked. Value of this parameter is 0 (Not Available) for Bypass stations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsMaxVSVCCount 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.21
Maximum number of Voice SVCs available in the network. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsCurrVSVCCount 1.3.6.1.4.1.449.2.1.3.1.3.10.1.1.22
Number of Voice SVCs currently in use. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSDataSummaryStatsTable 1.3.6.1.4.1.449.2.1.3.1.3.10.2
This table contains FRI Station Data Summary Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500friSDataSummaryStatsEntry

cdx6500friSDataSummaryStatsEntry 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1
Entries in the FRI Station Data Summary Statistics Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500friSDataSummaryStatsEntry  

friSDataSummStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.1
The FRI port number corresponding to this station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friSDataSummStatsStnNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.2
The number of the FRI station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

friSStatsCharInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.3
Number of characters received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsCharOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.4
Number of characters transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsCharInPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.5
Average number of characters received per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsCharOutPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.6
Average number of characters transmitted per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.7
Number of packets received since last node boot or statistics reset. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.8
Number of packets transmitted since last node boot or statistics reset. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsPktInPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.9
Average number of packets received per second. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsPktOutPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.10
Average number of packets transmitted per second. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsFrameInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.11
Number of frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsFrameOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.12
Number of frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsFrameInPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.13
Average number of frames received per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsFrameOutPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.14
Average number of frames transmitted per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsUtilIn 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.15
Indicates the quantity of user bytes received on the link expressed as a percentage of the maximum number of bytes that could have been received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsUtilOut 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.16
Indicates the quantity of user bytes sent down the link expressed as a percentage of the maximum number of bytes that could have been sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsNumPktsQueued 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.17
Current number of packets buffered since last node boot or statistics reset. Value of this parameter is 0 for Bypass stations (not available)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsPktsDiscardIn 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.18
Number of incoming packets discarded. Value of this parameter is only available for Bypass stations, 0 is returned otherwise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsPktsDiscardOut 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.19
Number of outgoing packets discarded. Value of this parameter is only available for Bypass stations, 0 is returned otherwise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsPktsQueuedIn 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.20
Current number of Incoming packets buffered since last node boot or statistics reset of a Bypass station. Value of this parameter is only available for Bypass stations, 0 is returned otherwise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsPktsQueuedOut 1.3.6.1.4.1.449.2.1.3.1.3.10.2.1.21
Current number of Outgoing packets buffered since last node boot or statistics reset of a Bypass station. Value of this parameter is only available for Bypass stations, 0 is returned otherwise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSVoiceSummaryStatsTable 1.3.6.1.4.1.449.2.1.3.1.3.10.3
This table contains FRI Station Voice Summary Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500friSVoiceSummaryStatsEntry

cdx6500friSVoiceSummaryStatsEntry 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1
Entries in the FRI Station Voice Summary Statistics Table. NOTE : Value of all objects in this table will be 0 for Bypass stations (not available).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500friSVoiceSummaryStatsEntry  

friSVoiceSummStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.1
The FRI port number corresponding to this station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friSVoiceSummStatsStnNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.2
The number of the FRI station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

friSStatsVoiceCharInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.3
Total number of voice characters received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsVoiceCharOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.4
Total number of voice characters transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsVoiceCharInPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.5
Number of voice characters received per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsVoiceCharOutPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.6
Number of voice characters transmitted per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsVoicePktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.7
Total number of voice packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsVoicePktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.8
Total number of voice packets transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsVoicePktInPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.9
Number of voice packets received per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSStatsVoicePktOutPerSec 1.3.6.1.4.1.449.2.1.3.1.3.10.3.1.10
Number of voice packets transmitted per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

friSFrameSummaryStatsTable 1.3.6.1.4.1.449.2.1.3.1.3.10.4
This table contains FRI Station Frame Summary Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500friSFrameSummaryStatsEntry

cdx6500friSFrameSummaryStatsEntry 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1
Entries in the FRI Station Frame Summary Statistics Table. NOTE : Value of all objects in this table will be 0 for Bypass stations (not available)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500friSFrameSummaryStatsEntry  

friSFrameSummStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.1
The FRI port number corresponding to this station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friSFrameSummStatsStnNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.2
The number of the FRI station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

friSStatsInfoFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.3
Information Frames received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsInfoFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.4
Information Frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRRFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.5
Number of RR Frames received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRRFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.6
Number of RR Frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRNRFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.7
Number of RNR frames received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRNRFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.8
Number of RNR frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsREJFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.9
Number of REJ frames received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsREJFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.10
Number of REJ frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsSABMFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.11
Number of SABM frames received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsSABMFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.12
Number of SABM frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsDISCFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.13
Number of DISC frames received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsDISCFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.14
Number of DISC frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsDMFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.15
Number of DM frames received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsDMFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.16
Number of DM frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsUAFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.17
Number of UA frames received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsUAFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.18
Number of UA frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsFRMRFramesInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.19
Number of FRMR frames received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsFRMRFramesOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.4.1.20
Number of FRMR frames transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSPacketSummaryStatsTable 1.3.6.1.4.1.449.2.1.3.1.3.10.5
This table contains FRI Station Packet Summary Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500friSPacketSummaryStatsEntry

cdx6500friSPacketSummaryStatsEntry 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1
Entries in the FRI Station Packet Summary Statistics Table. NOTE : Value of all objects in this table will be 0 for Bypass stations (not available)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500friSPacketSummaryStatsEntry  

friSPktSummStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.1
The FRI port number corresponding to this station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friSPktSummStatsStnNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.2
The number of the FRI station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

friSStatsDataPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.3
Number of Data packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsDataPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.4
Number of Data packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRRPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.5
Number of RR packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRRPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.6
Number of RR packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRNRPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.7
Number of RNR packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRNRPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.8
Number of RNR packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsREJPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.9
Number of REJ packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsREJPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.10
Number of REJ packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsCallReqPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.11
Number of call request packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsCallReqPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.12
Number of call request packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsCallAccPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.13
Number of call accept packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsCallAccPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.14
Number of call accept packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsClrReqPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.15
Number of clear request packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsClrReqPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.16
Number of clear request packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsClrConfPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.17
Number of clear confirm packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsClrConfPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.18
Number of clear confirm packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsIntrReqPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.19
Number of interrupt request packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsIntrReqPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.20
Number of interrupt request packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsIntrConfPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.21
Number of interrupt confirm packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsIntrConfPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.22
Number of interrupt confirm packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsResetReqPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.23
Number of reset request packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsResetReqPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.24
Number of reset request packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsResetConfPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.25
Number of reset confirm packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsResetConfPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.26
Number of reset confirm packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRestartReqPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.27
Number of restart request packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRestartReqPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.28
Number of restart request packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRestartConfPktInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.29
Number of restart confirm packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsRestartConfPktOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.5.1.30
Number of restart confirm packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSFRISummaryStatsTable 1.3.6.1.4.1.449.2.1.3.1.3.10.6
This table contains FRI Station FRI Summary Statistics parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500friSFRISummaryStatsEntry

cdx6500friSFRISummaryStatsEntry 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1
Entries in the FRI Station FRI Summary Statistics Table. NOTE : Value of all objects in this table are valid only for Bypass stations; 0 will be returned otherwise.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500friSFRISummaryStatsEntry  

friSFRISummStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.1
The FRI port number corresponding to this station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

friSFRISummStatsStnNumber 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.2
The number of the FRI station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

friSStatsFECNInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.3
Number of Forward Explicit Congestion Notification (FECN) packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsFECNOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.4
Number of Forward Explicit Congestion Notification (FECN) packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsBECNInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.5
Number of Backward Explicit Congestion Notification (BECN) packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsBECNOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.6
Number of Backward Explicit Congestion Notification (BECN) packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsDEInTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.7
Number of Discard Eligibility (DE) packets received since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

friSStatsDEOutTotal 1.3.6.1.4.1.449.2.1.3.1.3.10.6.1.8
Number of Discard Eligibility (DE) packets transmitted since last node boot or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500ContFRITable 1.3.6.1.4.1.449.2.1.4.14
OBJECT IDENTIFIER    

cdx6500FRIPContTable 1.3.6.1.4.1.449.2.1.4.14.1
Control parameters for FRI ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500FRIPContEntry

cdx6500FRIPContEntry 1.3.6.1.4.1.449.2.1.4.14.1.1
Each control applies to a single FRI port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500FRIPContEntry  

friPContPortNumber 1.3.6.1.4.1.449.2.1.4.14.1.1.1
Port number of the FRI port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..255  

friPContPortControl 1.3.6.1.4.1.449.2.1.4.14.1.1.2
Control operations for the specified FRI port. boot - Boots the FRI port enable - Enables the FRI port disable - Disables the FRI port resetstats - Resets the FRI port statistics.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER boot(1), enable(2), disable(3), resetstats(4)  

cdx6500FRISContTable 1.3.6.1.4.1.449.2.1.4.14.2
Control parameters for FRI stations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500FRISContEntry

cdx6500FRISContEntry 1.3.6.1.4.1.449.2.1.4.14.2.1
Each control applies to a single FRI station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500FRISContEntry  

friSContPortNumber 1.3.6.1.4.1.449.2.1.4.14.2.1.1
The FRI port number corresponding to this station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..255  

friSContStnNumber 1.3.6.1.4.1.449.2.1.4.14.2.1.2
FRI station number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..254  

friSContStnControl 1.3.6.1.4.1.449.2.1.4.14.2.1.3
Control operations for the specified FRI station. boot - Boots the FRI station enable - Enables the FRI station disable - Disables the FRI station resetstats - Resets the FRI station statistics.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER boot(1), enable(2), disable(3), resetstats(4)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor