FRDCE-OPT-MIB

Imported modules

Imported symbols

mgmt	NetworkAddress	IpAddress
Counter	Gauge	TimeTicks
enterprises	OBJECT-TYPE

Defined Types

Counter16
INTEGER	0..65535

DisplayString
OCTET STRING

PhysAddress
OCTET STRING

Cdx6500PCTFRDCEPortEntry
SEQUENCE
	cdx6500frdcepCfgPortNum	INTEGER
	cdx6500frdcepConnectionType	INTEGER
	cdx6500frdcepClockSource	INTEGER
	cdx6500frdcepClockSpeed	INTEGER
	cdx6500frdcepMaxStations	INTEGER
	cdx6500frdcepCtrlProtocol	INTEGER
	cdx6500frdcepT391	INTEGER
	cdx6500frdcepT392	INTEGER
	cdx6500frdcepN391	INTEGER
	cdx6500frdcepN392	INTEGER
	cdx6500frdcepN393	INTEGER
	cdx6500frdcepNT1	INTEGER
	cdx6500frdcepNT2	INTEGER
	cdx6500frdcepNN1	INTEGER
	cdx6500frdcepNN2	INTEGER
	cdx6500frdcepNN3	INTEGER
	cdx6500frdcepSubaddress	DisplayString
	cdx6500frdcepBiDirAnnexD	INTEGER
	cdx6500frdcepInvertTXClock	INTEGER
	cdx6500frdcepControlProtocolOptions	DisplayString
	cdx6500frdcepDiscardControlOptions	INTEGER
	cdx6500frdcepElectricalInterfaceType	INTEGER
	cdx6500frdcepV24ElectricalInterfaceOption	INTEGER
	cdx6500frdcepHighSpeedElectricalInterfaceOption	INTEGER

Cdx6500PPSTFRDCEPortEntry
SEQUENCE
	cdx6500frdcepStatsPortNum	INTEGER
	cdx6500frdcepPortStatus	INTEGER
	cdx6500frdcepPortSpeed	INTEGER
	cdx6500frdcepUtilizationIn	INTEGER
	cdx6500frdcepUtilizationOut	INTEGER
	cdx6500frdcepCharInTotal	Counter
	cdx6500frdcepCharOutTotal	Counter
	cdx6500frdcepCharsInPerSec	INTEGER
	cdx6500frdcepCharsOutPerSec	INTEGER
	cdx6500frdcepFrameInTotal	Counter
	cdx6500frdcepFrameOutTotal	Counter
	cdx6500frdcepFramesInPerSec	INTEGER
	cdx6500frdcepFramesOutPerSec	INTEGER
	cdx6500frdcepOverrunErrors	Counter16
	cdx6500frdcepUnderrunErrors	Counter16
	cdx6500frdcepCRCErrors	Counter16

Cdx6500SPCTFRDCEStationEntry
SEQUENCE
	cdx6500frdcesCfgPortNum	INTEGER
	cdx6500frdcesCfgDLCI	INTEGER
	cdx6500frdcesAutocallMnem	DisplayString
	cdx6500frdcesAutocallTimeout	INTEGER
	cdx6500frdcesMaxAutocalls	INTEGER
	cdx6500frdcesRemoteConnID	INTEGER
	cdx6500frdcesPriority	INTEGER
	cdx6500frdcesBillingRecords	INTEGER
	cdx6500frdcesStationNum	INTEGER
	cdx6500frdcesMaxInboundQueue	INTEGER

Cdx6500SPSTFRDCEStationEntry
SEQUENCE
	cdx6500frdcesStatsPortNum	INTEGER
	cdx6500frdcesStatsDLCI	INTEGER
	cdx6500frdcesUtilizationIn	INTEGER
	cdx6500frdcesUtilizationOut	INTEGER
	cdx6500frdcesMaxSVCCount	INTEGER
	cdx6500frdcesCurrentSVCCount	INTEGER
	cdx6500frdcesCharInTotal	Counter
	cdx6500frdcesCharOutTotal	Counter
	cdx6500frdcesCharsInPerSec	INTEGER
	cdx6500frdcesCharsOutPerSec	INTEGER
	cdx6500frdcesPktInTotal	Counter
	cdx6500frdcesPktOutTotal	Counter
	cdx6500frdcesPktsInPerSec	INTEGER
	cdx6500frdcesPktsOutPerSec	INTEGER
	cdx6500frdcesPacketsQueued	INTEGER
	cdx6500frdcesFrameInTotal	Counter
	cdx6500frdcesFrameOutTotal	Counter
	cdx6500frdcesFramesInPerSec	INTEGER
	cdx6500frdcesFramesOutPerSec	INTEGER
	cdx6500frdcesInfoFramesIn	Counter
	cdx6500frdcesInfoFramesOut	Counter
	cdx6500frdcesRNRFramesIn	Counter
	cdx6500frdcesRNRFramesOut	Counter
	cdx6500frdcesRRFramesIn	Counter
	cdx6500frdcesRRFramesOut	Counter
	cdx6500frdcesREJFramesIn	Counter
	cdx6500frdcesREJFramesOut	Counter
	cdx6500frdcesDataPktsIn	Counter
	cdx6500frdcesDataPktsOut	Counter
	cdx6500frdcesResetStats	INTEGER
	cdx6500frdcesBoot	INTEGER
	cdx6500frdcesDisable	INTEGER
	cdx6500frdcesEnable	INTEGER

Cdx6500frdcepPContEntry
SEQUENCE
	cdx6500frdcepContPortNumber	INTEGER
	cdx6500frdcepContPortControl	INTEGER

Cdx6500frdcesSContEntry
SEQUENCE
	cdx6500frdcesStationPortNumber	INTEGER
	cdx6500frdcesStationDLCI	INTEGER
	cdx6500frdcesStationControl	INTEGER

Defined Values

codex		1.3.6.1.4.1.449
OBJECT IDENTIFIER

cdxProductSpecific		1.3.6.1.4.1.449.2
OBJECT IDENTIFIER

cdx6500		1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER

cdx6500Configuration		1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER

cdx6500CfgProtocolGroup		1.3.6.1.4.1.449.2.1.2.1
OBJECT IDENTIFIER

cdx6500PCTPortProtocolGroup		1.3.6.1.4.1.449.2.1.2.1.1
OBJECT IDENTIFIER

cdx6500PCTStationProtocolGroup		1.3.6.1.4.1.449.2.1.2.1.3
OBJECT IDENTIFIER

cdx6500Statistics		1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER

cdx6500StatProtocolGroup		1.3.6.1.4.1.449.2.1.3.1
OBJECT IDENTIFIER

cdx6500PSTPortProtocolGroup		1.3.6.1.4.1.449.2.1.3.1.1
OBJECT IDENTIFIER

cdx6500PSTStationProtocolGroup		1.3.6.1.4.1.449.2.1.3.1.3
OBJECT IDENTIFIER

cdx6500Controls		1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER

cdx6500PCTFRDCEPortTable		1.3.6.1.4.1.449.2.1.2.1.1.6
All of the configuration parameters relevant to the Frame Relay DCE Port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PCTFRDCEPortEntry

cdx6500PCTFRDCEPortEntry		1.3.6.1.4.1.449.2.1.2.1.1.6.1
A row of SDLC Port configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PCTFRDCEPortEntry

cdx6500frdcepCfgPortNum		1.3.6.1.4.1.449.2.1.2.1.1.6.1.1
Port Number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500frdcepConnectionType		1.3.6.1.4.1.449.2.1.2.1.1.6.1.2
Specify the control signal handshake and clocking required for a connection to be made to this port: simp - simple, no control signals required. newvalSimp - same functionality as 'simp', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	simp(0), newvalSimp(50)

cdx6500frdcepClockSource		1.3.6.1.4.1.449.2.1.2.1.1.6.1.3
int - internal clock source. ext - external clock source. extint - Internal receive and external transmit clock source (DCE only). extlp - external receive and loopback transmit clock source (DTE only). EXTLP must be configured in conjunction with EXTINT. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	int(0), ext(1), extint(2), extlp(3), newvalInt(50)

cdx6500frdcepClockSpeed		1.3.6.1.4.1.449.2.1.2.1.1.6.1.4
This is the speed of the port in bits per second, when using internal clocking. Note that the maximum port speed is dependent on the type of hardware installed. Consult the users manual for details.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1200..2048000

cdx6500frdcepMaxStations		1.3.6.1.4.1.449.2.1.2.1.1.6.1.5
The highest station number to be configured on this FRA port. It is used to limit the configuration of stations.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepCtrlProtocol		1.3.6.1.4.1.449.2.1.2.1.1.6.1.6
Whether ANSI T1.617 Annex D or LMI Support is enabled none - None is enabled. annexD - Annex D is enabled. lmi - LMI is enabled. annexA - Annex A is enabled. newvalAnnexD - same functionality as 'annexD', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	annexD(0), none(1), lmi(2), annexA(3), newvalAnnexD(50)

cdx6500frdcepT391		1.3.6.1.4.1.449.2.1.2.1.1.6.1.7
This parameter is the Link Integrity Verification Timer polling period. When operating in bi-directional mode, FRA port sends status enquiry messages to network every T391/nT1 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepT392		1.3.6.1.4.1.449.2.1.2.1.1.6.1.8
This parameter is the Polling Cycle Verification Timer priod. The FRA port expects status enquiry messages every T392/nT2 seconds. This parameter must be set to a value greater than N391/nT1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepN391		1.3.6.1.4.1.449.2.1.2.1.1.6.1.9
This parameter is the Full Status Polling Cycle count. When operating in bi-directional mode, the FRA port sends Full status enquiry messages to network every N391/nN1 polls.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepN392		1.3.6.1.4.1.449.2.1.2.1.1.6.1.10
This parameter is the Error Inactivity Threshold. The data link is declared to be up after receiving N392/nN2 consecutive events without error. The data link is declared to be down when any N392/nN2 of the previous N393/nN3 events were received in error. This parameter must be set to a value less than or equal to N393/nN3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepN393		1.3.6.1.4.1.449.2.1.2.1.1.6.1.11
This parameter is the Monitored Events Count for measuring N392. The data link is declared to be down when any N392/nN2 of the previous N393/nN3 events were received in error. This parameter must be set to a value greater than or equal to N392/nN2.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepNT1		1.3.6.1.4.1.449.2.1.2.1.1.6.1.12
This parameter is the Link Integrity Verification Timer polling period. When operating in bi-directional mode, FRA port sends status enquiry messages to network every T391/nT1 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepNT2		1.3.6.1.4.1.449.2.1.2.1.1.6.1.13
This parameter is the Polling Cycle Verification Timer priod. The FRA port expects status enquiry messages every T392/nT2 seconds. This parameter must be set to a value greater than N391/nT1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepNN1		1.3.6.1.4.1.449.2.1.2.1.1.6.1.14
This parameter is the Full Status Polling Cycle count. When operating in bi-directional mode, the FRA port sends Full status enquiry messages to network every N391/nN1 polls.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepNN2		1.3.6.1.4.1.449.2.1.2.1.1.6.1.15
This parameter is the Error Inactivity Threshold. The data link is declared to be up after receiving N392/nN2 consecutive events without error. The data link is declared to be down when any N392/nN2 of the previous N393/nN3 events were received in error. This parameter must be set to a value less than or equal to N393/nN3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepNN3		1.3.6.1.4.1.449.2.1.2.1.1.6.1.16
This parameter is the Monitored Events Count for measuring N392. The data link is declared to be down when any N392/nN2 of the previous N393/nN3 events were received in error. This parameter must be set to a value greater than or equal to N392/nN2.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepSubaddress		1.3.6.1.4.1.449.2.1.2.1.1.6.1.17
Calls addressed to this node and with this subaddress will be routed to this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..3)

cdx6500frdcepBiDirAnnexD		1.3.6.1.4.1.449.2.1.2.1.1.6.1.18
Whether ANSI T1.617 Annex D bi-directional procedures are enabled bi - Bi-directional procedures are enabled. uni - Uni-directional procedures are enabled. newvalBi - same functionality as 'bi', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bi(0), uni(1), newvalBi(50)

cdx6500frdcepInvertTXClock		1.3.6.1.4.1.449.2.1.2.1.1.6.1.19
This parameter specifies whether the phase of the transmit clock should be inverted. Note: This parameter is primarily for X.21 electrical interfaces. no - Don't invert. yes - Invert.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2), nc(100)

cdx6500frdcepControlProtocolOptions		1.3.6.1.4.1.449.2.1.2.1.1.6.1.20
These options control the PVC management protocol none - No option selected async - The port will send/receive asynchronous A-bit if it is performing Network side protocol functionality nbit - The port will send and accept N-bit messages dbit - The port will send and accept D-bit messages This forces ASYNC to be specified (dbit+async)
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

cdx6500frdcepDiscardControlOptions		1.3.6.1.4.1.449.2.1.2.1.1.6.1.21
This parameter controls the discard frame options none - No option selected debit - DE marked frames are discarded before non-DE frames
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), debit(2)

cdx6500frdcepElectricalInterfaceType		1.3.6.1.4.1.449.2.1.2.1.1.6.1.22
Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	v24(1), v35(2), v36(3), x21(4), none(5)

cdx6500frdcepV24ElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.6.1.23
Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ri(1), tm(2)

cdx6500frdcepHighSpeedElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.6.1.24
Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), xover(2)

cdx6500PPSTFRDCEPortTable		1.3.6.1.4.1.449.2.1.3.1.1.6
All of the statistics parameters relevant to the Frame Relay DCE Port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPSTFRDCEPortEntry

cdx6500PPSTFRDCEPortEntry		1.3.6.1.4.1.449.2.1.3.1.1.6.1
A row of Frame Relay DCE Port statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPSTFRDCEPortEntry

cdx6500frdcepStatsPortNum		1.3.6.1.4.1.449.2.1.3.1.1.6.1.1
Port Number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500frdcepPortStatus		1.3.6.1.4.1.449.2.1.3.1.1.6.1.2
Port Status indicates whether or not the port is switched on and is ready for operation. This value may be one of : up - Port is up and running. down - Port is down. disabled - Port has been disabled. enabled - port has been enabled, but is not yet Up. busyOut - port has been set to be disabled as soon as last active call is disestablished. No new calls will be established. newvalDisabled - same functionality as 'disabled', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1), busyOut(2), up(3), down(4), newvalDisabled(50)

cdx6500frdcepPortSpeed		1.3.6.1.4.1.449.2.1.3.1.1.6.1.3
This is the speed of the port if clock is internal. If clock is external, this is the detected clock speed. If Port Speed is 0, clock is external, but clocking is not being received from attatched device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepUtilizationIn		1.3.6.1.4.1.449.2.1.3.1.1.6.1.4
Pertcentage of Port input bandwidth in use.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cdx6500frdcepUtilizationOut		1.3.6.1.4.1.449.2.1.3.1.1.6.1.5
Pertcentage of Port output bandwidth in use.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cdx6500frdcepCharInTotal		1.3.6.1.4.1.449.2.1.3.1.1.6.1.6
Number of message received since last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcepCharOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.6.1.7
Number of message sent since last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcepCharsInPerSec		1.3.6.1.4.1.449.2.1.3.1.1.6.1.8
Number of characters received per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepCharsOutPerSec		1.3.6.1.4.1.449.2.1.3.1.1.6.1.9
Number of characters received per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepFrameInTotal		1.3.6.1.4.1.449.2.1.3.1.1.6.1.10
Number of frames received since last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcepFrameOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.6.1.11
Number of frames sent since last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcepFramesInPerSec		1.3.6.1.4.1.449.2.1.3.1.1.6.1.12
Average number of frames received per second during the previous minute
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepFramesOutPerSec		1.3.6.1.4.1.449.2.1.3.1.1.6.1.13
Average number of frames transmitted per second during the previous minute
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcepOverrunErrors		1.3.6.1.4.1.449.2.1.3.1.1.6.1.14
Total number of overrun errors counted by the I/O driver.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500frdcepUnderrunErrors		1.3.6.1.4.1.449.2.1.3.1.1.6.1.15
Total number of underrun errors counted by the I/O driver.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500frdcepCRCErrors		1.3.6.1.4.1.449.2.1.3.1.1.6.1.16
Total number of CRC errors counted by the I/O driver.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter16

cdx6500SPCTFRDCEStationTable		1.3.6.1.4.1.449.2.1.2.1.3.3
All of the configuration parameters relevant to the Frame Relay DCE Station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500SPCTFRDCEStationEntry

cdx6500SPCTFRDCEStationEntry		1.3.6.1.4.1.449.2.1.2.1.3.3.1
A row of Frame Relay DCE station configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500SPCTFRDCEStationEntry

cdx6500frdcesCfgPortNum		1.3.6.1.4.1.449.2.1.2.1.3.3.1.1
Station number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500frdcesCfgDLCI		1.3.6.1.4.1.449.2.1.2.1.3.3.1.2
The Data Link Connection Identifier (dlci) is the unique identifier for the station on the FRA Port. Its valid range is 16 - 1007. It must match the DLCI configured on the attached FRAD.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	16..1007

cdx6500frdcesAutocallMnem		1.3.6.1.4.1.449.2.1.2.1.3.3.1.3
This is the mnemonic name used for auto calling. A blank indicates auto calling is disabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..8)

cdx6500frdcesAutocallTimeout		1.3.6.1.4.1.449.2.1.2.1.3.3.1.4
This is the time interval in seconds between call attempts when auto calling.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesMaxAutocalls		1.3.6.1.4.1.449.2.1.2.1.3.3.1.5
This parameter is used to specify the number of times that this FRA station will attempt to call when auto calling is enabled. A value of zero will allow unlimited attempts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesRemoteConnID		1.3.6.1.4.1.449.2.1.2.1.3.3.1.6
This parameter specifies the number of the remote LAN Connection or the number of the remote FRA station that this FRA station will attempt to connect to if configured for autocall.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesPriority		1.3.6.1.4.1.449.2.1.2.1.3.3.1.7
This parameter specifies the Traffic Priority of this FRA station. newvalLow - same functionality as 'low', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	low(0), medium(1), high(2), expedite(3), newvalLow(50)

cdx6500frdcesBillingRecords		1.3.6.1.4.1.449.2.1.2.1.3.3.1.8
This controls whether billing (accounting) records will be created for calls on this FRA station. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compliance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1), newvalDisabled(50)

cdx6500frdcesStationNum		1.3.6.1.4.1.449.2.1.2.1.3.3.1.9
The number of the logical link on the line. This is the value of Sxx for routing purposes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesMaxInboundQueue		1.3.6.1.4.1.449.2.1.2.1.3.3.1.10
This specifies the maximum number of frames which may be queued in the station's inbound queue. A smaller value may be choosen for applications which experience objectionable delays, if due to excessive growth of the station's inbound queue.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	100..2500

cdx6500SPSTFRDCEStationTable		1.3.6.1.4.1.449.2.1.3.1.3.3
All of the statistics parameters relevant to the Frame Relay DCE Station (DLCI) table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500SPSTFRDCEStationEntry

cdx6500SPSTFRDCEStationEntry		1.3.6.1.4.1.449.2.1.3.1.3.3.1
A row of Frame Relay DCE station (DLCI) Statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500SPSTFRDCEStationEntry

cdx6500frdcesStatsPortNum		1.3.6.1.4.1.449.2.1.3.1.3.3.1.1
Port Number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500frdcesStatsDLCI		1.3.6.1.4.1.449.2.1.3.1.3.3.1.2
The Data Link Connection Identifier (dlci) is the unique identifier for the station on the FRA Port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	16..1007

cdx6500frdcesUtilizationIn		1.3.6.1.4.1.449.2.1.3.1.3.3.1.3
The quantity of user bytes received on the line as a percentage of the maximum number of bytes that could have been received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cdx6500frdcesUtilizationOut		1.3.6.1.4.1.449.2.1.3.1.3.3.1.4
The quantity of user bytes sent on the line as a percentage of the maximum number of bytes that could have been received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

cdx6500frdcesMaxSVCCount		1.3.6.1.4.1.449.2.1.3.1.3.3.1.5
Maximum number of SVCs available in the network.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesCurrentSVCCount		1.3.6.1.4.1.449.2.1.3.1.3.3.1.6
Number of SVCs currently in use.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesCharInTotal		1.3.6.1.4.1.449.2.1.3.1.3.3.1.7
Total number of characters received since last node, port, or station boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesCharOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.3.1.8
Total number of characters sent since last node, port, or station boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesCharsInPerSec		1.3.6.1.4.1.449.2.1.3.1.3.3.1.9
Average number of characters received per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesCharsOutPerSec		1.3.6.1.4.1.449.2.1.3.1.3.3.1.10
Average number of characters transmitted per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesPktInTotal		1.3.6.1.4.1.449.2.1.3.1.3.3.1.11
Total number of Packets received since last node, port, or station boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesPktOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.3.1.12
Total number of Packets sent since last node, port, or station boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesPktsInPerSec		1.3.6.1.4.1.449.2.1.3.1.3.3.1.13
Average number of Packets received per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesPktsOutPerSec		1.3.6.1.4.1.449.2.1.3.1.3.3.1.14
Average number of Packets transmitted per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesPacketsQueued		1.3.6.1.4.1.449.2.1.3.1.3.3.1.15
Current number of packets buffered since since last node, port, or station boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesFrameInTotal		1.3.6.1.4.1.449.2.1.3.1.3.3.1.16
Total number of frames received since last node, port, or station boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesFrameOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.3.1.17
Total number of frames sent since last node, port, or station boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesFramesInPerSec		1.3.6.1.4.1.449.2.1.3.1.3.3.1.18
Average number of frames received per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesFramesOutPerSec		1.3.6.1.4.1.449.2.1.3.1.3.3.1.19
Average number of frames transmitted per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500frdcesInfoFramesIn		1.3.6.1.4.1.449.2.1.3.1.3.3.1.20
Number of data frames received since last node, port, or station boot or statistics reset.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesInfoFramesOut		1.3.6.1.4.1.449.2.1.3.1.3.3.1.21
Number of data frames sent since last node, port, or station boot or statistics reset.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesRNRFramesIn		1.3.6.1.4.1.449.2.1.3.1.3.3.1.22
Number of RNR frames received since last node, port, or station boot or statistics reset.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesRNRFramesOut		1.3.6.1.4.1.449.2.1.3.1.3.3.1.23
Number of RNR frames sent since last node, port, or station boot or statistics reset.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesRRFramesIn		1.3.6.1.4.1.449.2.1.3.1.3.3.1.24
Number of RR frames received since last node, port, or station boot or statistics reset.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesRRFramesOut		1.3.6.1.4.1.449.2.1.3.1.3.3.1.25
Number of RR frames sent since last node, port, or station boot or statistics reset.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesREJFramesIn		1.3.6.1.4.1.449.2.1.3.1.3.3.1.26
Number of REJ frames received since last node, port, or station boot or statistics reset.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesREJFramesOut		1.3.6.1.4.1.449.2.1.3.1.3.3.1.27
Number of REJ frames sent since last node, port, or station boot or statistics reset.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesDataPktsIn		1.3.6.1.4.1.449.2.1.3.1.3.3.1.28
Number of data packets received since last node, port, or station boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesDataPktsOut		1.3.6.1.4.1.449.2.1.3.1.3.3.1.29
Number of data packets sent since last node, port, or station boot or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500frdcesResetStats		1.3.6.1.4.1.449.2.1.3.1.3.3.1.30
reset : Resets the specified Frame Relay station statistics. noReset : Do not reset the specified Frame Relay station statistics.
Status: obsolete	Access: write-only
OBJECT-TYPE
	INTEGER	reset(1), noReset(2)

cdx6500frdcesBoot		1.3.6.1.4.1.449.2.1.3.1.3.3.1.31
boot : Boots the specified Frame Relay station. noBoot : Do not boot the specified Frame Relay station.
Status: obsolete	Access: write-only
OBJECT-TYPE
	INTEGER	boot(1), noBoot(2)

cdx6500frdcesDisable		1.3.6.1.4.1.449.2.1.3.1.3.3.1.32
disable : Disables the specified Frame Relay station. noDisable : Do not disable the specified Frame Relay station.
Status: obsolete	Access: write-only
OBJECT-TYPE
	INTEGER	disable(1), noDisable(2)

cdx6500frdcesEnable		1.3.6.1.4.1.449.2.1.3.1.3.3.1.33
enable : Enable the specified Frame Relay station. noEnable : Do not enable the specified Frame Relay station.
Status: obsolete	Access: write-only
OBJECT-TYPE
	INTEGER	enable(1), noEnable(2)

cdx6500ContFRATable		1.3.6.1.4.1.449.2.1.4.17
OBJECT IDENTIFIER

cdx6500frdcepPContTable		1.3.6.1.4.1.449.2.1.4.17.1
Control parameters for FRA ports.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500frdcepPContEntry

cdx6500frdcepPContEntry		1.3.6.1.4.1.449.2.1.4.17.1.1
A row of FRA port control.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500frdcepPContEntry

cdx6500frdcepContPortNumber		1.3.6.1.4.1.449.2.1.4.17.1.1.1
Port number of the FRA port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

cdx6500frdcepContPortControl		1.3.6.1.4.1.449.2.1.4.17.1.1.2
Control operations for the specified FRA port. boot - Boots the FRA port enable - Enables the FRA port disable - Disables the FRA port resetstats - Resets the FRA port statistics.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	boot(1), enable(2), disable(3), resetstats(4)

cdx6500frdcesSContTable		1.3.6.1.4.1.449.2.1.4.17.2
Control parameter for Fra stations
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500frdcesSContEntry

cdx6500frdcesSContEntry		1.3.6.1.4.1.449.2.1.4.17.2.1
A row of FRA Station control
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500frdcesSContEntry

cdx6500frdcesStationPortNumber		1.3.6.1.4.1.449.2.1.4.17.2.1.1
Fra Station Port number
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

cdx6500frdcesStationDLCI		1.3.6.1.4.1.449.2.1.4.17.2.1.2
Fra Station DLCI number
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	16..1007

cdx6500frdcesStationControl		1.3.6.1.4.1.449.2.1.4.17.2.1.3
Control operations for the specified FRA station. boot - Boot the FRA station enable - Enables the FRA station disable - Disables the FRA station resetstats - Resets the FRA station statistics.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	boot(1), enable(2), disable(3), resetstats(4)