FR-MIB

File: FR-MIB.mib (51782 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1213-MIB
BUNDLE-MIB NT-ENTERPRISE-DATA-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Integer32 Counter32 TruthValue
RowStatus DisplayString nnbundleId
ntEnterpriseDataTasmanMgmt

Defined Types

NnFrTableEntry  
SEQUENCE    
  nnfrIfEnable TruthValue
  nnfrEnablePvcAll TruthValue
  nnfrFrameSize Integer32 56..4096
  nnfrIfType INTEGER
  nnfrLmiType INTEGER
  nnfrLmiDceN392 Integer32 1..10
  nnfrLmiDceN393 Integer32 1..10
  nnfrLmiDteN392 Integer32 1..10
  nnfrLmiDteN393 Integer32 1..10
  nnfrLmiDteN391 Integer32 1..255
  nnfrLmiKeepalive Integer32 5..255
  nnmfrAckMsgTimer Integer32 1..10
  nnmfrAckMsgMaxRetry Integer32 1..5
  nnmfrClass INTEGER
  nnmfrClassThreshold Integer32 1..28
  nnmfrFrameSize Integer32 56..4096
  nnmfrHelloTimer Integer32 1..180
  nnmfrSegThreshold Integer32 56..4096
  nnmfrDiffDelay Integer32 10..128

NnFrPvcTableEntry  
SEQUENCE    
  nnfrPvcDlci Integer32 16..991
  nnfrPvcEnable TruthValue
  nnfrPvcDescr DisplayString
  nnfrPvcIpAddr IpAddress
  nnfrPvcIpSubnetMask IpAddress
  nnfrPvcRemoteIpAddr IpAddress
  nnfrPvcPolicingEnable INTEGER
  nnfrPvcPolicingDe TruthValue
  nnfrPvcPolicingCir Integer32
  nnfrPvcPolicingBc Integer32
  nnfrPvcPolicingBe Integer32
  nnfrPvcShapingCir Integer32
  nnfrPvcShapingBcMax Integer32
  nnfrPvcShapingBcMin Integer32
  nnfrPvcShapingBe Integer32
  nnfrPvcDlciForSwitching Integer32
  nnfrPvcBundleNameForSwitching DisplayString
  nnfrPvcRowStatus RowStatus

NnFrStatsTableEntry  
SEQUENCE    
  nnfrStatsFramesRx Counter32
  nnfrStatsInvFramesRx Counter32
  nnfrStatsFECNsRx Counter32
  nnfrStatsBECNsRx Counter32
  nnfrStatsShortFramesRx Counter32
  nnfrStatsLongFramesRx Counter32
  nnfrStatsInvDLCIsRx Counter32
  nnfrStatsUnknownDLCIsRx Counter32
  nnfrStatsFramesTx Counter32

NnFrPvcStatsTableEntry  
SEQUENCE    
  nnfrPvcStatsBytesRxLastBootOrClear Counter32
  nnfrPvcStatsBytesTxLastBootOrClear Counter32
  nnfrPvcStatsPktsRxLastBootOrClear Counter32
  nnfrPvcStatsPktsTxLastBootOrClear Counter32
  nnfrPvcStatsErrPktsRxLastBootOrClear Counter32
  nnfrPvcStatsUpDownStatesLastBootOrClear Counter32
  nnfrPvcStatsBytesRxLastFiveMins Counter32
  nnfrPvcStatsBytesTxLastFiveMins Counter32
  nnfrPvcStatsPktsRxLastFiveMins Counter32
  nnfrPvcStatsPktsTxLastFiveMins Counter32
  nnfrPvcStatsErrPktsRxLastFiveMins Counter32
  nnfrPvcStatsUpDownStatesLastFiveMins Counter32

NnFrAvcTableEntry  
SEQUENCE    
  nnfrAvcId Integer32
  nnfrAvcDlci Integer32 16..991
  nnfrAvcName DisplayString
  nnfrAvcIpAddr IpAddress
  nnfrAvcIpSubnetMask IpAddress
  nnfrAvcRemoteIpAddr IpAddress
  nnfrAvcClass INTEGER
  nnfrAvcClassThreshold Integer32
  nnfrAvcFragmentSize Integer32
  nnfrAvcSegThreshold Integer32
  nnfrAvcSequence INTEGER
  nnfrAvcDiffDelay Integer32
  nnfrAvcEnhancedMode INTEGER
  nnfrAvcNoOfCvcs Integer32
  nnfrAvcTotalBw Integer32
  nnfrAvcEnable TruthValue
  nnfrAvcRowStatus RowStatus

NnFrCvcTableEntry  
SEQUENCE    
  nnfrCvcBundleName DisplayString
  nnfrCvcEnable TruthValue
  nnfrCvcRowStatus RowStatus

NnAvcStatsTableEntry  
SEQUENCE    
  nnfrAvcStatsBytesRxLastBootOrClear Counter32
  nnfrAvcStatsBytesTxLastBootOrClear Counter32
  nnfrAvcStatsPktsRxLastBootOrClear Counter32
  nnfrAvcStatsPktsTxLastBootOrClear Counter32
  nnfrAvcStatsErrPktsRxLastBootOrClear Counter32
  nnfrAvcStatsUpDownStatesLastBootOrClear Counter32
  nnfrAvcStatsBytesRxLastFiveMins Counter32
  nnfrAvcStatsBytesTxLastFiveMins Counter32
  nnfrAvcStatsPktsRxLastFiveMins Counter32
  nnfrAvcStatsPktsTxLastFiveMins Counter32
  nnfrAvcStatsErrPktsRxLastFiveMins Counter32
  nnfrAvcStatsUpDownStatesLastFiveMins Counter32

Defined Values

nnfrMib 1.3.6.1.4.1.562.73.1.1.1.16
This file contains MIB module for Frame Relay implementation.
MODULE-IDENTITY    

nnfrTable 1.3.6.1.4.1.562.73.1.1.1.16.1
A list of a Frame Relay interface configuration parameters. The table contains parameters for both the uni and multi link frame-relay interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NnFrTableEntry

nnfrTableEntry 1.3.6.1.4.1.562.73.1.1.1.16.1.1
An entry in the frTable. The bundle Id forms the index into the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NnFrTableEntry  

nnfrIfEnable 1.3.6.1.4.1.562.73.1.1.1.16.1.1.1
Enables or disables the frame-relay interface. By default frame- relay interface is enabled. Writing zero (0) disables frame-relay interface.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

nnfrEnablePvcAll 1.3.6.1.4.1.562.73.1.1.1.16.1.1.2
Enables all PVCs related to the interface. By default all PVCs related to an interface are disabled. Writing One (1) enables all PVCs at the same time for an interface indexed by bundleId.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

nnfrFrameSize 1.3.6.1.4.1.562.73.1.1.1.16.1.1.3
Maximum Size of the frame that will be configured for this Frame Relay interface. The value for frame size ranges from 56 to 4096 bytes, with a default value of 1600 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 56..4096  

nnfrIfType 1.3.6.1.4.1.562.73.1.1.1.16.1.1.4
Indicates the interface type for the frame-relay interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dce(1), dte(2), nni(3)  

nnfrLmiType 1.3.6.1.4.1.562.73.1.1.1.16.1.1.5
Local management Interface type for the frame-relay interface. It can take any of the following three values: ansi - ANSI T1.617 (Annex D), cisco - Cisco LMI, q933a - ITU-T Q.933 (Annex A) To disable lmi operation, set the value to none(0).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), cisco(2), ansi(3), q933a(4)  

nnfrLmiDceN392 1.3.6.1.4.1.562.73.1.1.1.16.1.1.6
DCE/UNI error threshold value. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

nnfrLmiDceN393 1.3.6.1.4.1.562.73.1.1.1.16.1.1.7
DCE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

nnfrLmiDteN392 1.3.6.1.4.1.562.73.1.1.1.16.1.1.8
DTE/UNI error threshold. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

nnfrLmiDteN393 1.3.6.1.4.1.562.73.1.1.1.16.1.1.9
DTE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

nnfrLmiDteN391 1.3.6.1.4.1.562.73.1.1.1.16.1.1.10
DTE/UNI full status polling interval. Ranges from 1 to 255, with a default value of 6. To configure the value of this variable, LMI type should be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

nnfrLmiKeepalive 1.3.6.1.4.1.562.73.1.1.1.16.1.1.11
Local management interface keepalive polling interval time in seconds. The value for this ranges from 5 seconds to 255 seconds with a default value of 10 seconds. To configure the value of this variable, LMI type should be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..255  

nnmfrAckMsgTimer 1.3.6.1.4.1.562.73.1.1.1.16.1.1.12
The time to wait for an ADD_LINK_ACK message before timing out.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

nnmfrAckMsgMaxRetry 1.3.6.1.4.1.562.73.1.1.1.16.1.1.13
Maximum number of Retries for the Ack Msg. This variable can be set on a multilink bundle.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..5  

nnmfrClass 1.3.6.1.4.1.562.73.1.1.1.16.1.1.14
classA -- bundle is UP when 1 link is UP classB -- bundle is UP when all links are UP classC -- bundle is UP when user-specific # of links are UP. In the case of classC, mfrClassThreshold should be configured with mfrClass in an atomic set operation. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER classA(1), classB(2), classC(3)  

nnmfrClassThreshold 1.3.6.1.4.1.562.73.1.1.1.16.1.1.15
Threshold - minimum number of links required to activate bundle, for a mfrClass, classC. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..28  

nnmfrFrameSize 1.3.6.1.4.1.562.73.1.1.1.16.1.1.16
The frame size for multi-link frame relay. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 56..4096  

nnmfrHelloTimer 1.3.6.1.4.1.562.73.1.1.1.16.1.1.17
Hello timer in seconds. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..180  

nnmfrSegThreshold 1.3.6.1.4.1.562.73.1.1.1.16.1.1.18
Segment threshold packet size in bytes. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 56..4096  

nnmfrDiffDelay 1.3.6.1.4.1.562.73.1.1.1.16.1.1.19
Differential delay in milli seconds. This variable can be set on a multilink bundle but not on a uni link bundle.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..128  

nnfrPvcTable 1.3.6.1.4.1.562.73.1.1.1.16.2
A list of Frame Relay PVC parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NnFrPvcTableEntry

nnfrPvcTableEntry 1.3.6.1.4.1.562.73.1.1.1.16.2.1
An entry in the frPvcTable
Status: current Access: not-accessible
OBJECT-TYPE    
  NnFrPvcTableEntry  

nnfrPvcDlci 1.3.6.1.4.1.562.73.1.1.1.16.2.1.1
Data Link Connection Identifier of the PVC. The value ranges from 16 to 991. The Dlci is unique for a bundle but Dlci numbers can be reused across bundles.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 16..991  

nnfrPvcEnable 1.3.6.1.4.1.562.73.1.1.1.16.2.1.2
Enables PVC for given interface name and DLCI number. By default PVC is enabled. Writing one(1) on this enables PVC, zero (0) disables it.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

nnfrPvcDescr 1.3.6.1.4.1.562.73.1.1.1.16.2.1.3
Description for the configured PVC.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

nnfrPvcIpAddr 1.3.6.1.4.1.562.73.1.1.1.16.2.1.4
IP address to be configured for the PVC. PVC IP subnet Mask variable should also be configured alongwith this variable. A set on this variable will be successful only if the subnetmask is also set in the same request. To unconfigure the Ip address, a set is issued with the value of the ip address as 0.0.0.0
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

nnfrPvcIpSubnetMask 1.3.6.1.4.1.562.73.1.1.1.16.2.1.5
Subnet mask to be configured alongwith PVC IP address. This variable should be configured alongwith PVC IP address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

nnfrPvcRemoteIpAddr 1.3.6.1.4.1.562.73.1.1.1.16.2.1.6
Remote IP address to be mapped for PVC
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

nnfrPvcPolicingEnable 1.3.6.1.4.1.562.73.1.1.1.16.2.1.7
This variable is to disable/enable policing for PVC. Writing zero (0) on this disables policing for the PVC. By default policing is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), standard(2)  

nnfrPvcPolicingDe 1.3.6.1.4.1.562.73.1.1.1.16.2.1.8
If enabled, received frames that exceed policing threshold, will be tagged with DE bit. This variable can be configured only if policing is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

nnfrPvcPolicingCir 1.3.6.1.4.1.562.73.1.1.1.16.2.1.9
Committed Information Rate( bits per second ) in receive direction for PVC. This variable can be configured only if policing is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

nnfrPvcPolicingBc 1.3.6.1.4.1.562.73.1.1.1.16.2.1.10
Committed Burst ( bits ) in receive direction for PVC. This variable can be configured only if policing is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

nnfrPvcPolicingBe 1.3.6.1.4.1.562.73.1.1.1.16.2.1.11
Excess burst ( bits ) in receive direction for PVC. This variable can be configured only if policing enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

nnfrPvcShapingCir 1.3.6.1.4.1.562.73.1.1.1.16.2.1.12
The committed information rate (in bits per second) to be configured for the PVC.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

nnfrPvcShapingBcMax 1.3.6.1.4.1.562.73.1.1.1.16.2.1.13
The maximum committed burst (bits) to be configured for the PVC.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

nnfrPvcShapingBcMin 1.3.6.1.4.1.562.73.1.1.1.16.2.1.14
The minimum committed burst (bits) to be configured for the PVC.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

nnfrPvcShapingBe 1.3.6.1.4.1.562.73.1.1.1.16.2.1.15
The excess burst (bits) to be configured for the PVC.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

nnfrPvcDlciForSwitching 1.3.6.1.4.1.562.73.1.1.1.16.2.1.16
Data Link Connection Identifier of the PVC. The value for this variable ranges from 16 to 991. frPvcBundleNameForSwitching should be set with frPvcDlciForSwitching as an atomic set.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

nnfrPvcBundleNameForSwitching 1.3.6.1.4.1.562.73.1.1.1.16.2.1.17
The name of the bundle configured for Switching.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

nnfrPvcRowStatus 1.3.6.1.4.1.562.73.1.1.1.16.2.1.18
To create a row set row status to a value CreateAndGo(4), indexed by bundle Id and the desired dlci number.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

nnfrStatsTable 1.3.6.1.4.1.562.73.1.1.1.16.3
The statistics objects for a frame-relay interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NnFrStatsTableEntry

nnfrStatsTableEntry 1.3.6.1.4.1.562.73.1.1.1.16.3.1
An entry in the frStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NnFrStatsTableEntry  

nnfrStatsFramesRx 1.3.6.1.4.1.562.73.1.1.1.16.3.1.1
Numbers of frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrStatsInvFramesRx 1.3.6.1.4.1.562.73.1.1.1.16.3.1.2
Number of invalid frames received
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrStatsFECNsRx 1.3.6.1.4.1.562.73.1.1.1.16.3.1.3
Number of frames received with FECN bit on
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrStatsBECNsRx 1.3.6.1.4.1.562.73.1.1.1.16.3.1.4
Number of frames received with BECN bit on.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrStatsShortFramesRx 1.3.6.1.4.1.562.73.1.1.1.16.3.1.5
Number of short frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrStatsLongFramesRx 1.3.6.1.4.1.562.73.1.1.1.16.3.1.6
Number of long frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrStatsInvDLCIsRx 1.3.6.1.4.1.562.73.1.1.1.16.3.1.7
Number of frames with invalid dlci received
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrStatsUnknownDLCIsRx 1.3.6.1.4.1.562.73.1.1.1.16.3.1.8
Number of frames with unknown dlci received
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrStatsFramesTx 1.3.6.1.4.1.562.73.1.1.1.16.3.1.9
Number of frames transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsTable 1.3.6.1.4.1.562.73.1.1.1.16.4
FR PVC Statistics Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NnFrPvcStatsTableEntry

nnfrPvcStatsTableEntry 1.3.6.1.4.1.562.73.1.1.1.16.4.1
An entry in the FrPvcStats Table
Status: current Access: not-accessible
OBJECT-TYPE    
  NnFrPvcStatsTableEntry  

nnfrPvcStatsBytesRxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.4.1.1
Number of bytes received on a pvc since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsBytesTxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.4.1.2
Number of bytes transmitted on a pvc since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsPktsRxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.4.1.3
Number of packets received since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsPktsTxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.4.1.4
Number of packets transmitted since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsErrPktsRxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.4.1.5
Number of errored packets received since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsUpDownStatesLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.4.1.6
Number of times state(up or down) of the pvc changed in since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsBytesRxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.4.1.7
Number of bytes received in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsBytesTxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.4.1.8
Number of bytes transmitted in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsPktsRxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.4.1.9
Number of packets received in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsPktsTxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.4.1.10
Number of packets transmitted in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsErrPktsRxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.4.1.11
Number of errored packets received in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrPvcStatsUpDownStatesLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.4.1.12
Number of times state(up or down) of the pvc changed in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcTable 1.3.6.1.4.1.562.73.1.1.1.16.5
End-to-End MFR avc parameters are defined in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NnFrAvcTableEntry

nnfrAvcTableEntry 1.3.6.1.4.1.562.73.1.1.1.16.5.1
avc parameter entries are listed in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NnFrAvcTableEntry  

nnfrAvcId 1.3.6.1.4.1.562.73.1.1.1.16.5.1.1
frAvcId is the identifier of an avc. To configure an avc, this parameter must be used as the index. This is assigned internally by the system. Whenever a row creation needs to occur in the avcTable, the frAvcId is entered as 65535.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

nnfrAvcDlci 1.3.6.1.4.1.562.73.1.1.1.16.5.1.2
Data Link Connection Identifier of the avc. The value ranges from 16 to 1022. This number is unique across all the avcs created. Once set during creation, it can't be changed.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 16..991  

nnfrAvcName 1.3.6.1.4.1.562.73.1.1.1.16.5.1.3
Name of the avc. To configure an avc, this parameter must be set. That is, a descriptive name should be given to an avc. The maximum length of an avc name is 8 characters. This parameter is set once during the creation of an avc. an avc can not be renamed.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..8)  

nnfrAvcIpAddr 1.3.6.1.4.1.562.73.1.1.1.16.5.1.4
The avc's source IP address. This is one of the parameters required to set up IP multiplexing for an avc. Also the parameters avcIpAddr and avcSubnetMask have to be set together during the same request. To unconfigure the IP address, a set operation is performed with the value 0.0.0.0
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

nnfrAvcIpSubnetMask 1.3.6.1.4.1.562.73.1.1.1.16.5.1.5
This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a avc. This parameter is set along with the avcIpAddr parameter during the same request.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

nnfrAvcRemoteIpAddr 1.3.6.1.4.1.562.73.1.1.1.16.5.1.6
Remote IP address to be mapped for the avc. If configured, the arp table is updated with this static entry and inverse arp request packets are no longer sent for this interface.To unconfigure this parameter, a set operation is performed with the value 0.0.0.0 .
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

nnfrAvcClass 1.3.6.1.4.1.562.73.1.1.1.16.5.1.7
classA -- avc is UP when at least 1 cvc is UP classB -- avc is UP when all cvcs are UP classC -- avc is UP when user-specified # of cvcs are UP classD -- avc is UP when user-specified min. CIR of each cvc is met classE -- avc is UP when user-specified min. CIR of the avc is met In the case of classC/D/E, frAvcClassThreshold should be configured along with avcClass in an atomic set operation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER classA(1), classB(2), classC(3), classD(4), classE(5)  

nnfrAvcClassThreshold 1.3.6.1.4.1.562.73.1.1.1.16.5.1.8
Threshold - minimum number of links required to activate bundle, for the avcClass 'classC'. For 'classD' or 'classE', the value will be in bits per second. For 'classA' and 'classB', this value will hold no significance.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

nnfrAvcFragmentSize 1.3.6.1.4.1.562.73.1.1.1.16.5.1.9
The frame size for multi-link frame relay End-to-End avc in bytes. This value defines the maximum size of any fragment that can be transmitted on any cvc. Frames larger than this size must be fragmented.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 56..4096  

nnfrAvcSegThreshold 1.3.6.1.4.1.562.73.1.1.1.16.5.1.10
Segment threshold packet size in bytes. This value defines the minimum size of any fragment that can be transmitted on any cvc. Frames smaller than this size must not be fragmented.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 56..4096  

nnfrAvcSequence 1.3.6.1.4.1.562.73.1.1.1.16.5.1.11
multilink frame relay sequence number length (short = 12 bits ; long = 24 bits.24 bit sequence space increases MFR header by 2 more bytes, but in those situations where the differential delay is high ( > 50 ms ), larger sequence numbers help reduce packet drops that can happen when short sequence numbers complete a cycle quickly.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER short(1), long(2)  

nnfrAvcDiffDelay 1.3.6.1.4.1.562.73.1.1.1.16.5.1.12
Differential delay in milli seconds. This variable can be set only when the AVC is in Enhanced FRF.15 mode. This value indicates the maximum tolerable differential delay between any two CVCs. Any CVC whose diff. delay value exceeds this configured value will be brought down from active data transfer until it's diff. delay values recover. Possible Values: 0 and 10ms to 128ms.Setting the value of 0 will disable diff. delay related CVC bring down feature.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

nnfrAvcEnhancedMode 1.3.6.1.4.1.562.73.1.1.1.16.5.1.13
Enhanced FRF.15 mode is a modification of the standard FRF.15 to improve the end to end CVC status integrity and to calculate and act on differential delay build up. By default, the AVC is created in Standard FRF.15 mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nnfrAvcNoOfCvcs 1.3.6.1.4.1.562.73.1.1.1.16.5.1.14
Indicates the number of links configured in the avc.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nnfrAvcTotalBw 1.3.6.1.4.1.562.73.1.1.1.16.5.1.15
Indicates the total bandwidth for this avc. The avc bandwidth is the aggregated band- widths of all the links assigned to a particular avc.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

nnfrAvcEnable 1.3.6.1.4.1.562.73.1.1.1.16.5.1.16
Enables the AVC. By default AVC is enabled. Writing one(1) on this enables AVC, zero(0) disables it.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

nnfrAvcRowStatus 1.3.6.1.4.1.562.73.1.1.1.16.5.1.17
frAvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating an avc or deleting an avc. In order to add a row to the avc table, a set on this parameter should be done with the value 4 (createAndGo) and frAvcId index to be used is 65535. A request to create a row can be completed successfully only if a set on the avcRowStatus(4), frAvcName and frAvcDlci come in the same request. To delete a row this parameter has to be set with the value 6 (destroy).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

nnfrCvcTable 1.3.6.1.4.1.562.73.1.1.1.16.6
End-to-End MFR cvc parameters are defined in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NnFrCvcTableEntry

nnfrCvcTableEntry 1.3.6.1.4.1.562.73.1.1.1.16.6.1
cvc parameter entries are listed in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  NnFrCvcTableEntry  

nnfrCvcBundleName 1.3.6.1.4.1.562.73.1.1.1.16.6.1.1
The name of the bundle of the CVC which needs to be added to the avc. This parameter is used for display only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

nnfrCvcEnable 1.3.6.1.4.1.562.73.1.1.1.16.6.1.2
Enables/disables the CVC. By default CVC is enabled. Writing one(1) on this enables CVC, zero(0) disables it.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

nnfrCvcRowStatus 1.3.6.1.4.1.562.73.1.1.1.16.6.1.3
frCvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to adding or removing a CVC from an AVC. Adding a new row will require to index by the frAvcId,bundleId and frPvcDlci. Use proper index values and set RowStatus to CreateAndGo (4) to create a new row. To destroy, use value Destroy (6).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

nnfrAvcStatsTable 1.3.6.1.4.1.562.73.1.1.1.16.7
The statistics objects for a frame-relay interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NnAvcStatsTableEntry

nnfrAvcStatsTableEntry 1.3.6.1.4.1.562.73.1.1.1.16.7.1
An entry in the frAvcStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NnAvcStatsTableEntry  

nnfrAvcStatsBytesRxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.7.1.1
Number of bytes received on an avc since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsBytesTxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.7.1.2
Number of bytes transmitted on an avc since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsPktsRxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.7.1.3
Number of packets received since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsPktsTxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.7.1.4
Number of packets transmitted since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsErrPktsRxLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.7.1.5
Number of errored packets received since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsUpDownStatesLastBootOrClear 1.3.6.1.4.1.562.73.1.1.1.16.7.1.6
Number of times state(up or down) of the avc changed in since boot or last statistics clear.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsBytesRxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.7.1.7
Number of bytes received in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsBytesTxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.7.1.8
Number of bytes transmitted in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsPktsRxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.7.1.9
Number of packets received in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsPktsTxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.7.1.10
Number of packets transmitted in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsErrPktsRxLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.7.1.11
Number of errored packets received in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

nnfrAvcStatsUpDownStatesLastFiveMins 1.3.6.1.4.1.562.73.1.1.1.16.7.1.12
Number of times state(up or down) of the avc changed in the last five minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32