FOUNDRY-SN-MRP-MIB
File:
FOUNDRY-SN-MRP-MIB.mib (11880 bytes)
Imported modules
Imported symbols
Defined Types
| SnMetroRingEntry |
|
| SEQUENCE |
|
|
|
| |
snMetroRingVLanId |
Integer32 |
|
| |
snMetroRingId |
Integer32 |
|
| |
snMetroRingConfigState |
INTEGER |
|
| |
snMetroRingRole |
INTEGER |
|
| |
snMetroRingHelloTime |
Integer32 |
|
| |
snMetroRingPreforwardingTime |
Integer32 |
|
| |
snMetroRingPort1 |
InterfaceIndex |
|
| |
snMetroRingPort2 |
InterfaceIndex |
|
| |
snMetroRingName |
DisplayString |
|
| |
snMetroRingRowStatus |
INTEGER |
|
| |
snMetroRingOperState |
INTEGER |
|
| |
snMetroRingTopoGroupId |
Integer32 |
|
| |
snMetroRingRHPTransmitted |
Counter32 |
|
| |
snMetroRingRHPReceived |
Counter32 |
|
| |
snMetroRingStateChanged |
Counter32 |
|
| |
snMetroRingTCRBPDUReceived |
Counter32 |
|
| |
snMetroRingPriPort |
InterfaceIndex |
|
| |
snMetroRingSecPort |
InterfaceIndex |
|
| |
snMetroRingPriPortState |
INTEGER |
|
| |
snMetroRingSecPortState |
INTEGER |
|
| |
snMetroRingPriPortType |
INTEGER |
|
| |
snMetroRingSecPortType |
INTEGER |
|
| |
snMetroRingPriPortActivePort |
InterfaceIndex |
|
| |
snMetroRingSecPortActivePort |
InterfaceIndex |
|
Defined Values
| snMetroRing |
1.3.6.1.4.1.1991.1.1.3.29 |
| Management Information Base module for metro ring
configuration and statistics.
Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment. |
| MODULE-IDENTITY |
|
|
|
| snMetroRingEntry |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1 |
| An entry of the metro ring table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SnMetroRingEntry |
|
|
| snMetroRingVLanId |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.1 |
| Identifier of a VLAN that controls the metro ring. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| snMetroRingId |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.2 |
| Metro ring identifier. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| snMetroRingConfigState |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.3 |
| Metro ring state. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), enabled(2), disabled(3) |
|
| snMetroRingRole |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.4 |
| Metro ring role.
other(1).........none of the cases in below.
master(2)........device which originates RHP packets.
member(3)........device which forwards RHP packets. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), master(2), member(3) |
|
| snMetroRingHelloTime |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.5 |
| The time interval to periodically transmit ring health
protocol (RHP). Each unit is millisecond. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| snMetroRingPreforwardingTime |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.6 |
| The time interval of which a metro ring port is staying
in preforwarding state before changing to forwarding state.
Each unit is millisecond. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| snMetroRingPort1 |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.7 |
| The ifIndex value of port 1 to configure into the metro ring. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
|
|
| snMetroRingPort2 |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.8 |
| The ifIndex value of port 2 to configure into the metro ring. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
InterfaceIndex |
|
|
| snMetroRingRowStatus |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.10 |
| This object is used to create and delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with value of create(4)
returns error 'badValue'. Deleted rows go away immediately.
The following values can be returned on reads:
noSuchName...no such row
other(1).....some other cases
valid(2)....the row exists and is valid |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), valid(2), delete(3), create(4) |
|
| snMetroRingOperState |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.11 |
| Metro ring operational state. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), enabled(2), disabled(3) |
|
| snMetroRingTopoGroupId |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.12 |
| Topology group ID that controls the metro ring. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| snMetroRingRHPReceived |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.14 |
| Ring health protocol (RHP) received counter. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| snMetroRingPriPortState |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.19 |
| Metro ring primary port state.
other(1)...........none of the cases in below.
preforwarding(2)...port transmits RHP packets,
port does not transmit data packets.
forwarding(3)......port transmits RHP and data packets.
blocking(4)........port receives RHP packets,
port does not receive data packets.
disabled(5)........port is disabled from metro ring. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), preforwarding(2), forwarding(3), blocking(4), disabled(5) |
|
| snMetroRingSecPortState |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.20 |
| Metro ring secondary port state.
other(1)...........none of the cases in below.
preforwarding(2)...port transmits RHP packets,
port does not transmit data packets.
forwarding(3)......port transmits RHP and data packets.
blocking(4)........port receives RHP packets,
port does not receive data packets.
disabled(5)........port is disabled from metro ring. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), preforwarding(2), forwarding(3), blocking(4), disabled(5) |
|
| snMetroRingPriPortType |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.21 |
| Metro ring primary port type.
other(1).....none of the cases in below.
regular(2)...port is configured to operate on a single ring.
tunnel(3)....port is configured to operate on multiple rings. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), regular(2), tunnel(3) |
|
| snMetroRingSecPortType |
1.3.6.1.4.1.1991.1.1.3.29.2.1.1.22 |
| Metro ring secondary port type.
other(1).....none of the cases in below.
regular(2)...port is configured to operate on a single ring.
tunnel(3)....port is configured to operate on multiple rings. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
other(1), regular(2), tunnel(3) |
|