FORCE10-BGP4-V2-MIB

File: FORCE10-BGP4-V2-MIB.mib (115801 bytes)

Imported modules

SNMPv2-SMI	INET-ADDRESS-MIB	SNMPv2-TC
SNMPv2-CONF	SNMP-FRAMEWORK-MIB	FORCE10-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Counter32	Gauge32	mib-2
Unsigned32	Integer32	TimeTicks
InetAddressType	InetAddress	InetPortNumber
InetAutonomousSystemNumber	InetAddressPrefixLength	TEXTUAL-CONVENTION
TruthValue	RowPointer	StorageType
RowStatus	MODULE-COMPLIANCE	OBJECT-GROUP
NOTIFICATION-GROUP	SnmpAdminString	f10Experiment

Defined Types

F10BgpM2Identifier
The representation of a BGP Identifier. The BGP Identifier should be represented in the OCTET STRING as with the first OCTET of the string containing the first OCTET of the BGP Identifier received or sent in the OPEN packet and so on. Even though the BGP Identifier is trending away from an IP address it is still displayed as if it was one, even when it would be an illegal IP address.
TEXTUAL-CONVENTION
	OCTET STRING	Size(4)

F10BgpM2Afi
The representation of a BGP AFI
TEXTUAL-CONVENTION
	Unsigned32	0..65535

F10BgpM2Safi
The representation of a BGP SAFI
TEXTUAL-CONVENTION
	Unsigned32	0..255

F10BgpM2Community
The representation of a BGP Community.
TEXTUAL-CONVENTION
	OCTET STRING	Size(4)

F10BgpM2ExtendedCommunity
The representation of a BGP Extended Community.
TEXTUAL-CONVENTION
	OCTET STRING	Size(8)

F10BgpM2VersionEntry
SEQUENCE
	f10BgpM2VersionIndex	Unsigned32
	f10BgpM2VersionSupported	TruthValue

F10BgpM2SupportedCapabilityEntry
SEQUENCE
	f10BgpM2SupportedCapabilityCode	Unsigned32
	f10BgpM2SupportedCapability	TruthValue

F10BgpM2PeerEntry
SEQUENCE
	f10BgpM2PeerInstance	Unsigned32
	f10BgpM2PeerIdentifier	F10BgpM2Identifier
	f10BgpM2PeerState	INTEGER
	f10BgpM2PeerStatus	INTEGER
	f10BgpM2PeerConfiguredVersion	Unsigned32
	f10BgpM2PeerNegotiatedVersion	Unsigned32
	f10BgpM2PeerLocalAddrType	InetAddressType
	f10BgpM2PeerLocalAddr	InetAddress
	f10BgpM2PeerLocalPort	InetPortNumber
	f10BgpM2PeerLocalAs	InetAutonomousSystemNumber
	f10BgpM2PeerRemoteAddrType	InetAddressType
	f10BgpM2PeerRemoteAddr	InetAddress
	f10BgpM2PeerRemotePort	InetPortNumber
	f10BgpM2PeerRemoteAs	InetAutonomousSystemNumber
	f10BgpM2PeerIndex	Unsigned32

F10BgpM2PeerErrorsEntry
SEQUENCE
	f10BgpM2PeerLastErrorReceived	OCTET STRING
	f10BgpM2PeerLastErrorSent	OCTET STRING
	f10BgpM2PeerLastErrorReceivedTime	TimeTicks
	f10BgpM2PeerLastErrorSentTime	TimeTicks
	f10BgpM2PeerLastErrorReceivedText	SnmpAdminString
	f10BgpM2PeerLastErrorSentText	SnmpAdminString
	f10BgpM2PeerLastErrorReceivedData	OCTET STRING
	f10BgpM2PeerLastErrorSentData	OCTET STRING

F10BgpM2PeerEventTimesEntry
SEQUENCE
	f10BgpM2PeerFsmEstablishedTime	Gauge32
	f10BgpM2PeerInUpdatesElapsedTime	Gauge32

F10BgpM2PeerConfiguredTimersEntry
SEQUENCE
	f10BgpM2PeerConnectRetryInterval	Unsigned32
	f10BgpM2PeerHoldTimeConfigured	Unsigned32
	f10BgpM2PeerKeepAliveConfigured	Unsigned32
	f10BgpM2PeerMinASOrigInterval	Unsigned32
	f10BgpM2PeerMinRouteAdverInterval	Unsigned32

F10BgpM2PeerNegotiatedTimersEntry
SEQUENCE
	f10BgpM2PeerHoldTime	Unsigned32
	f10BgpM2PeerKeepAlive	Unsigned32

F10BgpM2PeerCapsAnnouncedEntry
SEQUENCE
	f10BgpM2PeerCapAnnouncedCode	Unsigned32
	f10BgpM2PeerCapAnnouncedIndex	Unsigned32
	f10BgpM2PeerCapAnnouncedValue	OCTET STRING

F10BgpM24PeerCapsReceivedEntry
SEQUENCE
	f10BgpM2PeerCapReceivedCode	Unsigned32
	f10BgpM2PeerCapReceivedIndex	Unsigned32
	f10BgpM2PeerCapReceivedValue	OCTET STRING

F10BgpM2PeerCountersEntry
SEQUENCE
	f10BgpM2PeerInUpdates	Counter32
	f10BgpM2PeerOutUpdates	Counter32
	f10BgpM2PeerInTotalMessages	Counter32
	f10BgpM2PeerOutTotalMessages	Counter32
	f10BgpM2PeerFsmEstablishedTrans	Counter32
	f10BgpM2PeerInKeepalives	Counter32
	f10BgpM2PeerOutKeepalives	Counter32
	f10BgpM2PeerInOpen	Counter32
	f10BgpM2PeerOutOpen	Counter32
	f10BgpM2PeerInRteRefresh	Counter32
	f10BgpM2PeerOutRteRefresh	Counter32

F10BgpM2PrefixCountersEntry
SEQUENCE
	f10BgpM2PrefixCountersAfi	F10BgpM2Afi
	f10BgpM2PrefixCountersSafi	F10BgpM2Safi
	f10BgpM2PrefixInPrefixes	Gauge32
	f10BgpM2PrefixInPrefixesAccepted	Gauge32
	f10BgpM2PrefixInPrefixesRejected	Gauge32
	f10BgpM2PrefixOutPrefixes	Gauge32
	f10BgpM2PrefixWdrawnByPeer	Gauge32
	f10BgpM2PrefixWdrawnFromPeer	Gauge32

F10BgpM2PeerReflectorClientEntry
SEQUENCE
	f10BgpM2PeerReflectorClient	INTEGER

F10BgpM2PeerConfedMemberEntry
SEQUENCE
	f10BgpM2PeerConfedMember	TruthValue

F10BgpM2CfgPeerAdminStatusEntry
SEQUENCE
	f10BgpM2CfgPeerAdminStatus	INTEGER

F10BgpM2CfgPeerEntry
SEQUENCE
	f10BgpM2CfgPeerConfiguredVersion	Unsigned32
	f10BgpM2CfgAllowVersionNegotiation	TruthValue
	f10BgpM2CfgPeerLocalAddrType	InetAddressType
	f10BgpM2CfgPeerLocalAddr	InetAddress
	f10BgpM2CfgPeerLocalAs	InetAutonomousSystemNumber
	f10BgpM2CfgPeerRemoteAddrType	InetAddressType
	f10BgpM2CfgPeerRemoteAddr	InetAddress
	f10BgpM2CfgPeerRemoteAs	InetAutonomousSystemNumber
	f10BgpM2CfgPeerEntryStorageType	StorageType
	f10BgpM2CfgPeerError	INTEGER
	f10BgpM2CfgPeerBgpPeerEntry	RowPointer
	f10BgpM2CfgPeerRowEntryStatus	RowStatus
	f10BgpM2CfgPeerIndex	Integer32
	f10BgpM2CfgPeerStatus	INTEGER

F10BgpM2CfgPeerTimersEntry
SEQUENCE
	f10BgpM2CfgPeerConnectRetryInterval	Unsigned32
	f10BgpM2CfgPeerHoldTimeConfigured	Unsigned32
	f10BgpM2CfgPeerKeepAliveConfigured	Unsigned32
	f10BgpM2CfgPeerMinASOrigInterval	Unsigned32
	f10BgpM2CfgPeerMinRouteAdverInter	Unsigned32

F10BgpM2CfgPeerReflectorClientEntry
SEQUENCE
	f10BgpM2CfgPeerReflectorClient	INTEGER

F10BgpM2CfgPeerConfedMemberEntry
SEQUENCE
	f10BgpM2CfgPeerConfedMember	TruthValue

F10BgpM2NlriEntry
SEQUENCE
	f10BgpM2NlriIndex	Unsigned32
	f10BgpM2NlriAfi	F10BgpM2Afi
	f10BgpM2NlriSafi	F10BgpM2Safi
	f10BgpM2NlriPrefixType	InetAddressType
	f10BgpM2NlriPrefix	InetAddress
	f10BgpM2NlriPrefixLen	InetAddressPrefixLength
	f10BgpM2NlriBest	TruthValue
	f10BgpM2NlriCalcLocalPref	Unsigned32
	f10BgpM2PathAttrIndex	Unsigned32
	f10BgpM2NlriOpaqueType	INTEGER
	f10BgpM2NlriOpaquePointer	RowPointer

F10BgpM2AdjRibsOutEntry
SEQUENCE
	f10BgpM2AdjRibsOutIndex	Unsigned32
	f10BgpM2AdjRibsOutRoute	RowPointer

F10BgpM2PathAttrEntry
SEQUENCE
	f10BgpM2PathAttrOrigin	INTEGER
	f10BgpM2PathAttrNextHopAddrType	InetAddressType
	f10BgpM2PathAttrNextHop	InetAddress
	f10BgpM2PathAttrMedPresent	TruthValue
	f10BgpM2PathAttrMed	Unsigned32
	f10BgpM2PathAttrLocalPrefPresent	TruthValue
	f10BgpM2PathAttrLocalPref	Unsigned32
	f10BgpM2PathAttrAtomicAggregate	INTEGER
	f10BgpM2PathAttrAggregatorAS	InetAutonomousSystemNumber
	f10BgpM2PathAttrAggregatorAddr	F10BgpM2Identifier
	f10BgpM2AsPathCalcLength	Unsigned32
	f10BgpM2AsPathString	SnmpAdminString
	f10BgpM2AsPathIndex	Unsigned32

F10BgpM2AsPath4byteEntry
SEQUENCE
	f10BgpM2AsPath4bytePathPresent	TruthValue
	f10BgpM2AsPath4byteAggregatorAS	InetAutonomousSystemNumber
	f10BgpM2AsPath4byteCalcLength	Unsigned32
	f10BgpM2AsPath4byteString	SnmpAdminString
	f10BgpM2AsPath4byteIndex	Unsigned32

F10BgpM2AsPathEntry
SEQUENCE
	f10BgpM2AsPathSegmentIndex	Unsigned32
	f10BgpM2AsPathElementIndex	Unsigned32
	f10BgpM2AsPathType	INTEGER
	f10BgpM2AsPathElementValue	InetAutonomousSystemNumber

F10BgpM2PathAttrUnknownEntry
SEQUENCE
	f10BgpM2PathAttrUnknownIndex	Unsigned32
	f10BgpM2PathAttrUnknownType	Unsigned32
	f10BgpM2PathAttrUnknownValue	OCTET STRING

F10BgpM2PathAttrOriginatorIdEntry
SEQUENCE
	f10BgpM2PathAttrOriginatorId	F10BgpM2Identifier

F10BgpM2PathAttrClusterEntry
SEQUENCE
	f10BgpM2PathAttrClusterIndex	Unsigned32
	f10BgpM2PathAttrClusterValue	F10BgpM2Identifier

F10BgpM2PathAttrCommEntry
SEQUENCE
	f10BgpM2PathAttrCommIndex	Unsigned32
	f10BgpM2PathAttrCommValue	F10BgpM2Community

F10BgpM2PathAttrExtCommEntry
SEQUENCE
	f10BgpM2PathAttrExtCommIndex	Unsigned32
	f10BgpM2PathAttrExtCommValue	F10BgpM2ExtendedCommunity

F10BgpM2LinkLocalNextHopEntry
SEQUENCE
	f10BgpM2LinkLocalNextHopPresent	TruthValue
	f10BgpM2LinkLocalNextHop	InetAddress

Defined Values

f10BgpM2		1.3.6.1.4.1.6027.20.1
This MIB module defines management objects for the Border Gateway Protocol, Version 4.
MODULE-IDENTITY

f10BgpM2BaseScalars		1.3.6.1.4.1.6027.20.1.1
OBJECT IDENTIFIER

f10BgpM2BaseNotifications		1.3.6.1.4.1.6027.20.1.1.0
OBJECT IDENTIFIER

f10BgpM2Established		1.3.6.1.4.1.6027.20.1.1.0.1
The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
Status: current	Access: read-write
NOTIFICATION-TYPE

f10BgpM2BackwardTransition		1.3.6.1.4.1.6027.20.1.1.0.2
The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.
Status: current	Access: read-write
NOTIFICATION-TYPE

f10BgpM2Version		1.3.6.1.4.1.6027.20.1.1.1
OBJECT IDENTIFIER

f10BgpM2VersionTable		1.3.6.1.4.1.6027.20.1.1.1.1
Table of supported BGP versions.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2VersionEntry

f10BgpM2VersionEntry		1.3.6.1.4.1.6027.20.1.1.1.1.1
Entry containing data on a given supported version of the Border Gateway Protocol and the level of support provided. It is expected that any agent implementation supporting this MIB module will report support for Version 4 of the Border Gateway Protocol at the very minimum.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2VersionEntry

f10BgpM2VersionIndex		1.3.6.1.4.1.6027.20.1.1.1.1.1.1
The version number of the BGP Protocol.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

f10BgpM2VersionSupported		1.3.6.1.4.1.6027.20.1.1.1.1.1.2
This value is TRUE if this version of the BGP protocol identified in 'f10BgpM2VersionIndex' is supported. The absence of a row for a particular f10BgpM2VersionIndex indicates that that f10BgpM2VersionIndex protocol version number is not supported.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2SupportedCapabilities		1.3.6.1.4.1.6027.20.1.1.2
OBJECT IDENTIFIER

f10BgpM2CapabilitySupportAvailable		1.3.6.1.4.1.6027.20.1.1.2.1
This value is TRUE if capability support is available and is enabled.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2SupportedCapabilitiesTable		1.3.6.1.4.1.6027.20.1.1.2.2
Table of supported BGP-4 capabilities.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2SupportedCapabilityEntry

f10BgpM2SupportedCapabilitiesEntry		1.3.6.1.4.1.6027.20.1.1.2.2.1
Information about supported capabilities indexed by capability number.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2SupportedCapabilityEntry

f10BgpM2SupportedCapabilityCode		1.3.6.1.4.1.6027.20.1.1.2.2.1.1
Index of supported capability. The index directly corresponds with the BGP-4 Capability Advertisement Capability Code.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

f10BgpM2SupportedCapability		1.3.6.1.4.1.6027.20.1.1.2.2.1.2
This value is True if this capability is supported, False otherwise.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2AsSize		1.3.6.1.4.1.6027.20.1.1.4
The size of the AS value in this implementation. The semantics of this are determined as per the as-4bytes draft.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	twoOctet(1), fourOctet(2)

f10BgpM2LocalAs		1.3.6.1.4.1.6027.20.1.1.5
The local autonomous system number. If the f10BgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
Status: current	Access: read-only
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2LocalIdentifier		1.3.6.1.4.1.6027.20.1.1.6
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Identifier

f10BgpM2BaseScalarExtensions		1.3.6.1.4.1.6027.20.1.1.7
OBJECT IDENTIFIER

f10BgpM2BaseScalarNonCapExts		1.3.6.1.4.1.6027.20.1.1.7.1
OBJECT IDENTIFIER

f10BgpM2BaseScalarCapExts		1.3.6.1.4.1.6027.20.1.1.7.2
OBJECT IDENTIFIER

f10BgpM2BaseScalarRouteReflectExts		1.3.6.1.4.1.6027.20.1.1.7.1.2796
OBJECT IDENTIFIER

f10BgpM2RouteReflector		1.3.6.1.4.1.6027.20.1.1.7.1.2796.1
This value is TRUE if this implementation supports the BGP Route Reflection Extension and is enabled as a route reflector. If the BGP Route Reflection extension is not supported this value must be FALSE.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2ClusterId		1.3.6.1.4.1.6027.20.1.1.7.1.2796.2
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's F10BgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Identifier

f10BgpM2BaseScalarASConfedExts		1.3.6.1.4.1.6027.20.1.1.7.1.3065
OBJECT IDENTIFIER

f10BgpM2ConfederationRouter		1.3.6.1.4.1.6027.20.1.1.7.1.3065.1
This value is TRUE if this implementation supports the BGP AS Confederations Extension and this router is configured to be in a confederation.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2ConfederationId		1.3.6.1.4.1.6027.20.1.1.7.1.3065.2
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
Status: current	Access: read-only
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2BaseScalarConfiguration		1.3.6.1.4.1.6027.20.1.1.8
OBJECT IDENTIFIER

f10BgpM2CfgBaseScalarStorageType		1.3.6.1.4.1.6027.20.1.1.8.1
This object specifies the intended storage type for all configurable base scalars.
Status: current	Access: read-write
OBJECT-TYPE
	StorageType

f10BgpM2CfgLocalAs		1.3.6.1.4.1.6027.20.1.1.8.2
The local autonomous system number. If the f10BgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
Status: current	Access: read-write
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2CfgLocalIdentifier		1.3.6.1.4.1.6027.20.1.1.8.3
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
Status: current	Access: read-write
OBJECT-TYPE
	F10BgpM2Identifier

f10BgpM2CfgBaseScalarExtensions		1.3.6.1.4.1.6027.20.1.1.8.4
OBJECT IDENTIFIER

f10BgpM2CfgBaseScalarNonCapExts		1.3.6.1.4.1.6027.20.1.1.8.4.1
OBJECT IDENTIFIER

f10BgpM2CfgBaseScalarCapExts		1.3.6.1.4.1.6027.20.1.1.8.4.2
OBJECT IDENTIFIER

f10BgpM2CfgBaseScalarReflectorExts		1.3.6.1.4.1.6027.20.1.1.8.4.1.2796
OBJECT IDENTIFIER

f10BgpM2CfgRouteReflector		1.3.6.1.4.1.6027.20.1.1.8.4.1.2796.1
This value is set to true if this implementation will be supporting route reflection.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

f10BgpM2CfgClusterId		1.3.6.1.4.1.6027.20.1.1.8.4.1.2796.2
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's F10BgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
Status: current	Access: read-write
OBJECT-TYPE
	F10BgpM2Identifier

f10BgpM2CfgBaseScalarASConfedExts		1.3.6.1.4.1.6027.20.1.1.8.4.1.3065
OBJECT IDENTIFIER

f10BgpM2CfgConfederationRouter		1.3.6.1.4.1.6027.20.1.1.8.4.1.3065.1
This value is set to true if this implementation will be supporting BGP AS Confederations.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

f10BgpM2CfgConfederationId		1.3.6.1.4.1.6027.20.1.1.8.4.1.3065.2
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
Status: current	Access: read-write
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2Peer		1.3.6.1.4.1.6027.20.1.2
OBJECT IDENTIFIER

f10BgpM2PeerData		1.3.6.1.4.1.6027.20.1.2.1
OBJECT IDENTIFIER

f10BgpM2PeerTable		1.3.6.1.4.1.6027.20.1.2.1.1
BGP peer table. This table contains, one entry per remote BGP peer, any information about the connections with the remote BGP peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PeerEntry

f10BgpM2PeerEntry		1.3.6.1.4.1.6027.20.1.2.1.1.1
Entry containing information about the connection with a remote BGP peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PeerEntry

f10BgpM2PeerInstance		1.3.6.1.4.1.6027.20.1.2.1.1.1.1
The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes RFC 2547 PE-CE routers. Implementations that do not support multiple routing instances should return 1 for this object. XXX TODO - We need to provide a way to configure these in the peer configuration table.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PeerIdentifier		1.3.6.1.4.1.6027.20.1.2.1.1.1.2
The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the f10BgpM2PeerState is in the OpenConfirm or the Established state.
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Identifier

f10BgpM2PeerState		1.3.6.1.4.1.6027.20.1.2.1.1.1.3
The remote BGP peer's FSM state.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)

f10BgpM2PeerStatus		1.3.6.1.4.1.6027.20.1.2.1.1.1.4
Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The f10BgpM2PeerState will generally be in the idle state when the FSM is halted, although some extensions such as Graceful Restart will leave the peer in the Idle state but with the FSM running.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	halted(1), running(2)

f10BgpM2PeerConfiguredVersion		1.3.6.1.4.1.6027.20.1.2.1.1.1.5
The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..255

f10BgpM2PeerNegotiatedVersion		1.3.6.1.4.1.6027.20.1.2.1.1.1.6
The negotiated version of BGP running between the two peers.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..255

f10BgpM2PeerLocalAddrType		1.3.6.1.4.1.6027.20.1.2.1.1.1.7
The address family of the local end of the peering session.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

f10BgpM2PeerLocalAddr		1.3.6.1.4.1.6027.20.1.2.1.1.1.8
The address of the local end of the peering session.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(4..20)

f10BgpM2PeerLocalPort		1.3.6.1.4.1.6027.20.1.2.1.1.1.9
The local port for the TCP connection between the BGP peers.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

f10BgpM2PeerLocalAs		1.3.6.1.4.1.6027.20.1.2.1.1.1.10
Some implementations of BGP can represent themselves as multiple ASs. This is the AS that this peering session is representing itself as to the remote peer.
Status: current	Access: read-only
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2PeerRemoteAddrType		1.3.6.1.4.1.6027.20.1.2.1.1.1.11
The address family of the remote end of the peering session.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

f10BgpM2PeerRemoteAddr		1.3.6.1.4.1.6027.20.1.2.1.1.1.12
The address of the remote end of the peering session.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(4..20)

f10BgpM2PeerRemotePort		1.3.6.1.4.1.6027.20.1.2.1.1.1.13
The remote port for the TCP connection between the BGP peers. In the case of a transport for which the notion of 'port' is irrelevant, an instance value of -1 should be returned by the agent for this object. Note that the objects f10BgpM2PeerLocalAddr, f10BgpM2PeerLocalPort, f10BgpM2PeerRemoteAddr and f10BgpM2PeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. or even the ipv6 TCP MIB as in rfc2452.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

f10BgpM2PeerRemoteAs		1.3.6.1.4.1.6027.20.1.2.1.1.1.14
The remote autonomous system number.
Status: current	Access: read-only
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2PeerIndex		1.3.6.1.4.1.6027.20.1.2.1.1.1.15
This value is a unique index for the remote peer entry in the f10BgpM2PeerTable. It is assigned by the agent at the point of creation of the f10BgpM2PeerTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2PeerIndex row instance values across rows of the f10BgpM2PeerTable. It is used to provide an index structure for other tables whose data is logically per-peer. For explicitly configured peers, this value will remain consistent until this row is deleted by deleting the configured peers. Unconfigured peers will generate a monotonically increasing number when a BGP FSM is built to process the peering session. Values in the f10BgpM2PeerTable and other tables utilizing f10BgpM2PeerIndex are expected to remain in existence for an arbitrary time after the unconfigured peer has been deleted in order to allow management applications to extract useful management information for those peers. Thus, an unconfigured peer using the same indices as the f10BgpM2PeerTable that comes up while this row still exists will re-utilize the same row.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PeerErrors		1.3.6.1.4.1.6027.20.1.2.2
OBJECT IDENTIFIER

f10BgpM2PeerErrorsTable		1.3.6.1.4.1.6027.20.1.2.2.1
On a per peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer, by its f10BgpM2PeerIndex, exists in this table, then no such errors have been observed, reported, and recorded on the session.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PeerErrorsEntry

f10BgpM2PeerErrorsEntry		1.3.6.1.4.1.6027.20.1.2.2.1.1
Each entry contains information about errors sent and received for a particular BGP peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PeerErrorsEntry

f10BgpM2PeerLastErrorReceived		1.3.6.1.4.1.6027.20.1.2.2.1.1.1
The last error code and subcode received by this BGP Speaker via a NOTIFICATION message for this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

f10BgpM2PeerLastErrorSent		1.3.6.1.4.1.6027.20.1.2.2.1.1.2
The last error code and subcode sent by this BGP Speaker via a NOTIFICATION message to this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

f10BgpM2PeerLastErrorReceivedTime		1.3.6.1.4.1.6027.20.1.2.2.1.1.3
The timestamp that the last NOTIFICATION was received from this peer.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

f10BgpM2PeerLastErrorSentTime		1.3.6.1.4.1.6027.20.1.2.2.1.1.4
The timestamp that the last NOTIFICATION was sent to this peer.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

f10BgpM2PeerLastErrorReceivedText		1.3.6.1.4.1.6027.20.1.2.2.1.1.5
This object contains an implementation specific explanation of the error that was reported.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

f10BgpM2PeerLastErrorSentText		1.3.6.1.4.1.6027.20.1.2.2.1.1.6
This object contains an implementation specific explanation of the error that is being reported.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

f10BgpM2PeerLastErrorReceivedData		1.3.6.1.4.1.6027.20.1.2.2.1.1.7
The last error code's data seen by this peer.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..4075)

f10BgpM2PeerLastErrorSentData		1.3.6.1.4.1.6027.20.1.2.2.1.1.8
The last error code's data sent to this peer.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..4075)

f10BgpM2PeerTimers		1.3.6.1.4.1.6027.20.1.2.3
OBJECT IDENTIFIER

f10BgpM2PeerEventTimesTable		1.3.6.1.4.1.6027.20.1.2.3.1
A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the Established state.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PeerEventTimesEntry

f10BgpM2PeerEventTimesEntry		1.3.6.1.4.1.6027.20.1.2.3.1.1
Each row contains a set of statistics about time spent and events encountered in the peer session Established state.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PeerEventTimesEntry

f10BgpM2PeerFsmEstablishedTime		1.3.6.1.4.1.6027.20.1.2.3.1.1.1
This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

f10BgpM2PeerInUpdatesElapsedTime		1.3.6.1.4.1.6027.20.1.2.3.1.1.2
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time f10BgpM2PeerInUpdates is incremented, the value of this object is set to zero (0). This value shall also be zero (0) when the peer is not in the Established state
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

f10BgpM2PeerConfiguredTimersTable		1.3.6.1.4.1.6027.20.1.2.3.2
Per peer management data on BGP session timers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PeerConfiguredTimersEntry

f10BgpM2PeerConfiguredTimersEntry		1.3.6.1.4.1.6027.20.1.2.3.2.1
Each entry corresponds to the current state of BGP timers on a given peering session.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PeerConfiguredTimersEntry

f10BgpM2PeerConnectRetryInterval		1.3.6.1.4.1.6027.20.1.2.3.2.1.1
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

f10BgpM2PeerHoldTimeConfigured		1.3.6.1.4.1.6027.20.1.2.3.2.1.2
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (f10BgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0 \| 3..65535

f10BgpM2PeerKeepAliveConfigured		1.3.6.1.4.1.6027.20.1.2.3.2.1.3
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in f10BgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by f10BgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of f10BgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0 \| 1..21845

f10BgpM2PeerMinASOrigInterval		1.3.6.1.4.1.6027.20.1.2.3.2.1.4
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

f10BgpM2PeerMinRouteAdverInterval		1.3.6.1.4.1.6027.20.1.2.3.2.1.5
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

f10BgpM2PeerNegotiatedTimersTable		1.3.6.1.4.1.6027.20.1.2.3.3
Current values of per-peer timers which can be dynamically set in the f10BgpM2PeerConfiguredTimersTable. Values reflected in this table are the current operational values, after negotiation from values derived from initial configuration or last set from f10BgpM2PeerConfiguredTimersTable row instances.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PeerNegotiatedTimersEntry

f10BgpM2PeerNegotiatedTimersEntry		1.3.6.1.4.1.6027.20.1.2.3.3.1
Each entry reflects a value of the currently operational, negotiated timers as reflected in the F10BgpM2PeerNegotiatedTimersEntry.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PeerNegotiatedTimersEntry

f10BgpM2PeerHoldTime		1.3.6.1.4.1.6027.20.1.2.3.3.1.1
The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages are sent and the Hold Timer is not set. At least three (3). This value is the smaller of the value sent by this peer in the OPEN message and f10BgpM2PeerHoldTimeConfigured for this peer. This value is only defined when the peering session is in the Established state.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0 \| 3..65535

f10BgpM2PeerKeepAlive		1.3.6.1.4.1.6027.20.1.2.3.3.1.2
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with f10BgpM2PeerHoldTime, it has the same proportion as what f10BgpM2PeerKeepAliveConfigured has when compared with f10BgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of f10BgpM2PeerKeepAliveConfigured is zero (0). This value is only defined when the peering session is in the Established state.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0 \| 1..21845

f10BgpM2PeerCapabilities		1.3.6.1.4.1.6027.20.1.2.4
OBJECT IDENTIFIER

f10BgpM2PeerCapsAnnouncedTable		1.3.6.1.4.1.6027.20.1.2.4.1
This table contains the capabilities that are supported for a given peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PeerCapsAnnouncedEntry

f10BgpM2PeerCapsAnnouncedEntry		1.3.6.1.4.1.6027.20.1.2.4.1.1
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PeerCapsAnnouncedEntry

f10BgpM2PeerCapAnnouncedCode		1.3.6.1.4.1.6027.20.1.2.4.1.1.1
The BGP Capability Advertisement Capability Code.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

f10BgpM2PeerCapAnnouncedIndex		1.3.6.1.4.1.6027.20.1.2.4.1.1.2
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..128

f10BgpM2PeerCapAnnouncedValue		1.3.6.1.4.1.6027.20.1.2.4.1.1.3
The value of the announced capability.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

f10BgpM2PeerCapsReceivedTable		1.3.6.1.4.1.6027.20.1.2.4.2
This table contains the capabilities that are supported for a given peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM24PeerCapsReceivedEntry

f10BgpM2PeerCapsReceivedEntry		1.3.6.1.4.1.6027.20.1.2.4.2.1
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM24PeerCapsReceivedEntry

f10BgpM2PeerCapReceivedCode		1.3.6.1.4.1.6027.20.1.2.4.2.1.1
The BGP Capability Advertisement Capability Code.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..255

f10BgpM2PeerCapReceivedIndex		1.3.6.1.4.1.6027.20.1.2.4.2.1.2
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..128

f10BgpM2PeerCapReceivedValue		1.3.6.1.4.1.6027.20.1.2.4.2.1.3
The value of the announced capability.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

f10BgpM2PeerCounters		1.3.6.1.4.1.6027.20.1.2.6
OBJECT IDENTIFIER

f10BgpM2PeerCountersTable		1.3.6.1.4.1.6027.20.1.2.6.1
The counters associated with a BGP Peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PeerCountersEntry

f10BgpM2PeerCountersEntry		1.3.6.1.4.1.6027.20.1.2.6.1.1
Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PeerCountersEntry

f10BgpM2PeerInUpdates		1.3.6.1.4.1.6027.20.1.2.6.1.1.1
The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerOutUpdates		1.3.6.1.4.1.6027.20.1.2.6.1.1.2
The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerInTotalMessages		1.3.6.1.4.1.6027.20.1.2.6.1.1.3
The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerOutTotalMessages		1.3.6.1.4.1.6027.20.1.2.6.1.1.4
The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerFsmEstablishedTrans		1.3.6.1.4.1.6027.20.1.2.6.1.1.5
The total number of times the BGP FSM transitioned into the established state for this peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerInKeepalives		1.3.6.1.4.1.6027.20.1.2.6.1.1.6
The number of Keepalive messages received from a peer.Implemented by Dell.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerOutKeepalives		1.3.6.1.4.1.6027.20.1.2.6.1.1.7
The number of Keepalive messages sent to a peer. Implemented by Dell.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerInOpen		1.3.6.1.4.1.6027.20.1.2.6.1.1.8
The number of Open messages received from a peer. Implemented by Dell.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerOutOpen		1.3.6.1.4.1.6027.20.1.2.6.1.1.9
The number of Open messages sent to a peer. Implemented by Dell.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerInRteRefresh		1.3.6.1.4.1.6027.20.1.2.6.1.1.10
The number of Route Refresh messages received from a peer. Implemented by Dell.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PeerOutRteRefresh		1.3.6.1.4.1.6027.20.1.2.6.1.1.11
The number of Route Refresh messages sent to a peer. Implemented by Dell.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PrefixCountersTable		1.3.6.1.4.1.6027.20.1.2.6.2
Additional per-peer, per AFI SAFI counters for prefixes
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PrefixCountersEntry

f10BgpM2PrefixCountersEntry		1.3.6.1.4.1.6027.20.1.2.6.2.1
Entry containing information about a bgp-peers prefix counters.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PrefixCountersEntry

f10BgpM2PrefixCountersAfi		1.3.6.1.4.1.6027.20.1.2.6.2.1.1
The AFI index of the per-peer, per prefix counters
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Afi

f10BgpM2PrefixCountersSafi		1.3.6.1.4.1.6027.20.1.2.6.2.1.2
The SAFI index of the per-peer, per prefix counters
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Safi

f10BgpM2PrefixInPrefixes		1.3.6.1.4.1.6027.20.1.2.6.2.1.7
The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

f10BgpM2PrefixInPrefixesAccepted		1.3.6.1.4.1.6027.20.1.2.6.2.1.8
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

f10BgpM2PrefixInPrefixesRejected		1.3.6.1.4.1.6027.20.1.2.6.2.1.9
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are NOT eligible to become active in the Loc-Rib.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

f10BgpM2PrefixOutPrefixes		1.3.6.1.4.1.6027.20.1.2.6.2.1.10
The number of prefixes for a peer that are installed in that peers Adj-Ribs-Out.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

f10BgpM2PrefixWdrawnByPeer		1.3.6.1.4.1.6027.20.1.2.6.2.1.11
The number of prefixes withdrawn by a peer. Implemened by Dell.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

f10BgpM2PrefixWdrawnFromPeer		1.3.6.1.4.1.6027.20.1.2.6.2.1.12
The number of prefixes withdrawn from a peer. Implemened by Dell.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

f10BgpM2PeerExtensions		1.3.6.1.4.1.6027.20.1.2.7
OBJECT IDENTIFIER

f10BgpM2PeerNonCapExts		1.3.6.1.4.1.6027.20.1.2.7.1
OBJECT IDENTIFIER

f10BgpM2PeerCapExts		1.3.6.1.4.1.6027.20.1.2.7.2
OBJECT IDENTIFIER

f10BgpM2PeerRouteReflectionExts		1.3.6.1.4.1.6027.20.1.2.7.1.2796
OBJECT IDENTIFIER

f10BgpM2PeerReflectorClientTable		1.3.6.1.4.1.6027.20.1.2.7.1.2796.1
Table of route reflection client settings on a per-peer basis.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PeerReflectorClientEntry

f10BgpM2PeerReflectorClientEntry		1.3.6.1.4.1.6027.20.1.2.7.1.2796.1.1
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PeerReflectorClientEntry

f10BgpM2PeerReflectorClient		1.3.6.1.4.1.6027.20.1.2.7.1.2796.1.1.1
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nonClient(0), client(1), meshedClient(2)

f10BgpM2PeerASConfederationExts		1.3.6.1.4.1.6027.20.1.2.7.1.3065
OBJECT IDENTIFIER

f10BgpM2PeerConfedMemberTable		1.3.6.1.4.1.6027.20.1.2.7.1.3065.1
Table of confederation member settings on a per-peer basis.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PeerConfedMemberEntry

f10BgpM2PeerConfedMemberEntry		1.3.6.1.4.1.6027.20.1.2.7.1.3065.1.1
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PeerConfedMemberEntry

f10BgpM2PeerConfedMember		1.3.6.1.4.1.6027.20.1.2.7.1.3065.1.1.1
This value indicates whether the given peer is in our confederation or not.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2PeerConfiguration		1.3.6.1.4.1.6027.20.1.2.8
OBJECT IDENTIFIER

f10BgpM2CfgPeerAdminStatusTable		1.3.6.1.4.1.6027.20.1.2.8.1
Table containing rows for administratively starting and stopping peering sessions.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2CfgPeerAdminStatusEntry

f10BgpM2CfgPeerAdminStatusEntry		1.3.6.1.4.1.6027.20.1.2.8.1.1
Entry containing row for administratively starting and stopping peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2CfgPeerAdminStatusEntry

f10BgpM2CfgPeerAdminStatus		1.3.6.1.4.1.6027.20.1.2.8.1.1.1
This object allows the Manual Stop and Manual Start events to be sent to an activated peering session.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	stop(1), start(2)

f10BgpM2CfgPeerNextIndex		1.3.6.1.4.1.6027.20.1.2.8.2
This object contains the next appropriate value to use as an index for creation of a row instance in in the f10BgpM2CfgPeerTable. If the number of available entries in the f10BgpM2CfgPeerTable is exhausted, a retrieval value of this object instance will return 0. A value of 0 may also be returned if the agent is otherwise incapable of f10BgpM2CfgPeerTable row creation at the time of f10BgpM2CfgPeerNextIndex retrieval.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

f10BgpM2CfgPeerTable		1.3.6.1.4.1.6027.20.1.2.8.3
BGP configuration peer table. This table allows the configuration of the parameters for a session with a BGP peer. +++wayne provide description of how config should be done for a peer per table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2CfgPeerEntry

f10BgpM2CfgPeerEntry		1.3.6.1.4.1.6027.20.1.2.8.3.1
Entry containing information set up by a management entity to configure a connection with a BGP peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2CfgPeerEntry

f10BgpM2CfgPeerConfiguredVersion		1.3.6.1.4.1.6027.20.1.2.8.3.1.1
The configured version to originally start with this peer. The BGP speaker may permit negotiation to a lower version number of the protocol depending on the set value of f10BgpM2CfgAllowVersionNegotiation.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..255

f10BgpM2CfgAllowVersionNegotiation		1.3.6.1.4.1.6027.20.1.2.8.3.1.2
If set to true, during session establishment with this peer, negotiation to a version lower than that specified in f10BgpM2CfgPeerConfiguredVersion will be allowed.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

f10BgpM2CfgPeerLocalAddrType		1.3.6.1.4.1.6027.20.1.2.8.3.1.3
The address family of the speakers of this BGP session.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

f10BgpM2CfgPeerLocalAddr		1.3.6.1.4.1.6027.20.1.2.8.3.1.4
The address of the local end of the peering session.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(4..20)

f10BgpM2CfgPeerLocalAs		1.3.6.1.4.1.6027.20.1.2.8.3.1.5
Autonomous system represented to peer on peering session initialization. Some implementations of BGP can represent themselves as multiple ASes. These implementations can set this to an alternate autonomous system. If this object is set to zero (0) at the point this row instance is set to active, then the implementation will initialize this session representing itself as the value of f10BgpM2CfgLocalAs.
Status: current	Access: read-create
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2CfgPeerRemoteAddrType		1.3.6.1.4.1.6027.20.1.2.8.3.1.6
The address family of the speakers of the remote BGP session.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

f10BgpM2CfgPeerRemoteAddr		1.3.6.1.4.1.6027.20.1.2.8.3.1.7
The address of the remote end (destination address of peer) for peering session.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(4..20)

f10BgpM2CfgPeerRemoteAs		1.3.6.1.4.1.6027.20.1.2.8.3.1.8
Autonomous system number of the remote peer.
Status: current	Access: read-create
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2CfgPeerEntryStorageType		1.3.6.1.4.1.6027.20.1.2.8.3.1.9
This object type specifies the intended storage type for the f10BgpM2CfgPeerEntry row instance.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

f10BgpM2CfgPeerError		1.3.6.1.4.1.6027.20.1.2.8.3.1.10
This value indicates the current error status of the row denoting the configured error status. If this row is still under creation (has not been activated f10BgpM2CfgPeerRowEntryStatus), then this instance will be set to not-activated (1). At the point that the row is activated, f10BgpM2CfgPeerError will reflect the error status of the row data itself. If there is another session already activated with the same local and remote addresses as denoted by {f10BgpM2CfgPeerLocalAddrType, f10BgpM2CfgPeerLocalAddr, f10BgpM2CfgPeerRemoteAddr}, then the value of this will be set to err-duplicate-peering-session (2). If this row is associated with a peer session whose initialization has been attempted, the value will be set to activated (3) (and, f10BgpM2PeerCfgPeerEntry will be set to the row instance of the entry in the f10BgpM2PeerTable which reflects the state of the peering session). Note that this object only reflects the error as a function of the attempted activation of this row as containing data for a bgp peering session. The actual state of the session at the point of any protocol exchange or session state machine initiation is reflected in the f10BgpM2PeerTable row instance (as reflected through f10BgpM2CfgPeerPeerEntry) associated with this row instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), notActivated(1), errDuplicatePeeringSession(2), activated(3)

f10BgpM2CfgPeerBgpPeerEntry		1.3.6.1.4.1.6027.20.1.2.8.3.1.11
Upon activation of the session data contained in this row instance, this object points to an instance of a row within the f10BgpM2PeerTable reflecting the session in its initializing or operational state. Retrieval of this column instance will always yield a value of {0.0} unless the session has successfully been activated (via f10BgpM2CfgPeerRowEntryStatus). Such row instances will always have a value of f10BgpM2CfgPeerError which is activated (3).
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

f10BgpM2CfgPeerRowEntryStatus		1.3.6.1.4.1.6027.20.1.2.8.3.1.12
This object type is used to control creation, activation, and deletion of this row instance.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

f10BgpM2CfgPeerIndex		1.3.6.1.4.1.6027.20.1.2.8.3.1.13
Uniquely identifies an instance of a peer row, as an element of configuration.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	1..65535

f10BgpM2CfgPeerStatus		1.3.6.1.4.1.6027.20.1.2.8.3.1.14
This specifies the state of the peering session upon activation. If disabled, the FSM is in the halted state and no Automatic Start events are generated. If enabled, the FSM is in the running state and Automatic Start events may be generated.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	halted(1), running(2)

f10BgpM2CfgPeerTimersTable		1.3.6.1.4.1.6027.20.1.2.8.4
Table for configuration of per-peer timers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2CfgPeerTimersEntry

f10BgpM2CfgPeerTimersEntry		1.3.6.1.4.1.6027.20.1.2.8.4.1
Entry containing per-peer timer configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2CfgPeerTimersEntry

f10BgpM2CfgPeerConnectRetryInterval		1.3.6.1.4.1.6027.20.1.2.8.4.1.1
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..65535

f10BgpM2CfgPeerHoldTimeConfigured		1.3.6.1.4.1.6027.20.1.2.8.4.1.2
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (f10BgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 \| 3..65535

f10BgpM2CfgPeerKeepAliveConfigured		1.3.6.1.4.1.6027.20.1.2.8.4.1.3
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in f10BgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by f10BgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of f10BgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0 \| 1..21845

f10BgpM2CfgPeerMinASOrigInterval		1.3.6.1.4.1.6027.20.1.2.8.4.1.4
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

f10BgpM2CfgPeerMinRouteAdverInter		1.3.6.1.4.1.6027.20.1.2.8.4.1.5
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

f10BgpM2CfgPeerExtensions		1.3.6.1.4.1.6027.20.1.2.8.5
OBJECT IDENTIFIER

f10BgpM2CfgPeerNonCapExts		1.3.6.1.4.1.6027.20.1.2.8.5.1
OBJECT IDENTIFIER

f10BgpM2CfgPeerCapExts		1.3.6.1.4.1.6027.20.1.2.8.5.2
OBJECT IDENTIFIER

f10BgpM2CfgPeerRouteReflectionExts		1.3.6.1.4.1.6027.20.1.2.8.5.1.2796
OBJECT IDENTIFIER

f10BgpM2CfgPeerReflectorClientTable		1.3.6.1.4.1.6027.20.1.2.8.5.1.2796.1
Table of route reflection client settings on a per-peer basis.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2CfgPeerReflectorClientEntry

f10BgpM2CfgPeerReflectorClientEntry		1.3.6.1.4.1.6027.20.1.2.8.5.1.2796.1.1
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2CfgPeerReflectorClientEntry

f10BgpM2CfgPeerReflectorClient		1.3.6.1.4.1.6027.20.1.2.8.5.1.2796.1.1.1
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	nonClient(0), client(1), meshedClient(2)

f10BgpM2CfgPeerASConfederationExts		1.3.6.1.4.1.6027.20.1.2.8.5.1.3065
OBJECT IDENTIFIER

f10BgpM2CfgPeerConfedMemberTable		1.3.6.1.4.1.6027.20.1.2.8.5.1.3065.1
Table of confederation member settings on a per-peer basis.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2CfgPeerConfedMemberEntry

f10BgpM2CfgPeerConfedMemberEntry		1.3.6.1.4.1.6027.20.1.2.8.5.1.3065.1.1
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2CfgPeerConfedMemberEntry

f10BgpM2CfgPeerConfedMember		1.3.6.1.4.1.6027.20.1.2.8.5.1.3065.1.1.1
This value indicates whether the given peer is in our confederation or not.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

f10BgpM2Rib		1.3.6.1.4.1.6027.20.1.3
OBJECT IDENTIFIER

f10BgpM2NlriTable		1.3.6.1.4.1.6027.20.1.3.1
The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents the Adj-Ribs-In. The route where f10BgpM2NlriBest is TRUE represents, for this NLRI, the route that is installed in the LocRib from the Adj-Ribs-In.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2NlriEntry

f10BgpM2NlriEntry		1.3.6.1.4.1.6027.20.1.3.1.1
Information about a path to a network.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2NlriEntry

f10BgpM2NlriIndex		1.3.6.1.4.1.6027.20.1.3.1.1.1
This index allows for multiple instances of a base prefix for a certain AFI SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single route instance. 2. Allow for extensions which extend the NLRI field to send the same prefix while utilizing other extension specific information. An example of this is RFC 3107 - Carrying MPLS labels in BGP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2NlriAfi		1.3.6.1.4.1.6027.20.1.3.1.1.2
The address family of the prefix for this NLRI.
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Afi

f10BgpM2NlriSafi		1.3.6.1.4.1.6027.20.1.3.1.1.3
The subsequent address family of the prefix for this NLRI
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Safi

f10BgpM2NlriPrefixType		1.3.6.1.4.1.6027.20.1.3.1.1.4
The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the f10BgpM2NlriAfi field. Where an appropriate InetAddressType is not available, the value of the object must be unknown(0). XXX TODO - This seems like a hack.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

f10BgpM2NlriPrefix		1.3.6.1.4.1.6027.20.1.3.1.1.5
An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by f10BgpM2PathAttrAddrPrefixLen. Any bits beyond the length specified by f10BgpM2PathAttrAddrPrefixLen are zeroed.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(4..20)

f10BgpM2NlriPrefixLen		1.3.6.1.4.1.6027.20.1.3.1.1.6
Length in bits of the address prefix in the Network Layer Reachability Information field.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressPrefixLength

f10BgpM2NlriBest		1.3.6.1.4.1.6027.20.1.3.1.1.7
An indication of whether or not this route was chosen as the best BGP4 route.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2NlriCalcLocalPref		1.3.6.1.4.1.6027.20.1.3.1.1.8
The degree of preference calculated by the receiving BGP4 speaker for an advertised route.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PathAttrIndex		1.3.6.1.4.1.6027.20.1.3.1.1.9
This value is a unique index for the per-NLRI entry in the f10BgpM2PathAttrTable. It is assigned by the agent at the point of creation of the f10BgpM2PathAttrTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2PathAttrIndex row instance values across rows of the f10BgpM2PeerAttrTable. It is used to provide an index structure for other tables whose data is logically per-peer, per-NLRI.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2NlriOpaqueType		1.3.6.1.4.1.6027.20.1.3.1.1.10
This object enumerates the type of the row that is pointed to in the table row f10BgpM2NlriOpaquePointer instance, if f10BgpM2NlriOpaquePointer is in fact not a zero length. f10BgpM2NlriOpaqueType is necessary since the data referenced by f10BgpM2NlriOpaquePointer is opaque to BGP. For example, in the case of RFC 3107, the label stack that is pointed to may occur in the mplsLabelStackTable from the MPLS-LSR-MIB, and the instance value of f10BgpM2NlriOpaqueType would be bgpMplsLabelStack(1).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), bgpMplsLabelStack(1)

f10BgpM2NlriOpaquePointer		1.3.6.1.4.1.6027.20.1.3.1.1.11
Pointer to a row that decomposes the data that is opaque to the BGP MIB but is sent in the NLRI. This RowPointer has zero (0) length data instance if f10BgpM2NlriOpaqueType is none.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

f10BgpM2AdjRibsOutTable		1.3.6.1.4.1.6027.20.1.3.2
This table contains on a per-peer basis one or more routes from the f10BgpM2NlriTable that have been placed in this peer's Adj-Ribs-Out.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2AdjRibsOutEntry

f10BgpM2AdjRibsOutEntry		1.3.6.1.4.1.6027.20.1.3.2.1
List of BGP routes that have been placed into a peer's Adj-Ribs-Out.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2AdjRibsOutEntry

f10BgpM2AdjRibsOutIndex		1.3.6.1.4.1.6027.20.1.3.2.1.1
Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2AdjRibsOutRoute		1.3.6.1.4.1.6027.20.1.3.2.1.2
This object points to the route in the f10BgpM2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process.
Status: current	Access: read-only
OBJECT-TYPE
	RowPointer

f10BgpM2PathAttrCount		1.3.6.1.4.1.6027.20.1.3.3
The number of entries in the f10BgpM2PathAttrTable.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

f10BgpM2PathAttrTable		1.3.6.1.4.1.6027.20.1.3.4
Provides per advertised network-prefix attribute data, as advertised over a peering session.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PathAttrEntry

f10BgpM2PathAttrEntry		1.3.6.1.4.1.6027.20.1.3.4.1
Each entry contains data about a given network prefix, per-prefix and per-advertising peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PathAttrEntry

f10BgpM2PathAttrOrigin		1.3.6.1.4.1.6027.20.1.3.4.1.1
The ultimate origin of the path information.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	igp(1), egp(2), incomplete(3)

f10BgpM2PathAttrNextHopAddrType		1.3.6.1.4.1.6027.20.1.3.4.1.2
The address family of the address for the border router that should be used to access the destination network.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

f10BgpM2PathAttrNextHop		1.3.6.1.4.1.6027.20.1.3.4.1.3
The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of the prefix in this row. Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. f10BgpM2LinkLocalNextHopTable will contain the linklocal scope nexthop. In the case that the mechanism documented in draft-kato-bgp-ipv6-link-local-00.txt is used and only a link local nexthop has been sent, , f10BgpM2LinkLocalNextHopPresent will be false and f10BgpM2PathAttrNextHop will contain the link local nexthop.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(4..20)

f10BgpM2PathAttrMedPresent		1.3.6.1.4.1.6027.20.1.3.4.1.4
Whether or not the MED value is present. If it is not present, the f10BgpM2PathAttrMed object has no useful value and should be set to 0.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2PathAttrMed		1.3.6.1.4.1.6027.20.1.3.4.1.5
This metric is used to discriminate between multiple exit points to an adjacent autonomous system.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PathAttrLocalPrefPresent		1.3.6.1.4.1.6027.20.1.3.4.1.6
Whether or not the LocalPref value is present. If it is not present, the f10BgpM2PathAttrLocalPref object has no useful value and should be set to 0.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2PathAttrLocalPref		1.3.6.1.4.1.6027.20.1.3.4.1.7
The originating BGP4 speakers degree of preference for an advertised route.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PathAttrAtomicAggregate		1.3.6.1.4.1.6027.20.1.3.4.1.8
When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	atomicAggregatePresent(1), atomicAggregateMissing(2)

f10BgpM2PathAttrAggregatorAS		1.3.6.1.4.1.6027.20.1.3.4.1.9
The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
Status: current	Access: read-only
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2PathAttrAggregatorAddr		1.3.6.1.4.1.6027.20.1.3.4.1.10
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Identifier

f10BgpM2AsPathCalcLength		1.3.6.1.4.1.6027.20.1.3.4.1.11
This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2AsPathString		1.3.6.1.4.1.6027.20.1.3.4.1.12
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

f10BgpM2AsPathIndex		1.3.6.1.4.1.6027.20.1.3.4.1.13
This value is a unique index for the decomposed AS Path in the f10BgpM2AsPathTable. It is assigned by the agent at the point of creation of the f10BgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2AsPathIndex row instance values across rows of the f10BgpM2AsPathTable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2AsPath4byteTable		1.3.6.1.4.1.6027.20.1.3.5
This table is present for BGP speakers that support the AS 4byte specification and are functioning as a router between 2-byte and 4-byte AS space.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2AsPath4byteEntry

f10BgpM2AsPath4byteEntry		1.3.6.1.4.1.6027.20.1.3.5.1
Each row contains the information for the AS 4-byte extension's NEW_AS_PATH and NEW_AGGREGATOR attributes.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2AsPath4byteEntry

f10BgpM2AsPath4bytePathPresent		1.3.6.1.4.1.6027.20.1.3.5.1.1
This value may only be true if this BGP Speaker is functioning as a router between ASs that are in 2-byte and 4-byte AS space. If this value is true, then the NEW_AS_PATH attributes are present and the 4-byte versions of the appropriate path attributes are in this row. If this value is false, then the following values will be present in the row: f10BgpM2PathAttrAggregatorAS - zero (0). f10BgpM2AsPathCalcLength - zero (0). f10BgpM2AsPathString - zero (0) length string. f10BgpM2AsPathIndex - zero (0).
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2AsPath4byteAggregatorAS		1.3.6.1.4.1.6027.20.1.3.5.1.2
The NEW_AGGREGATOR AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
Status: current	Access: read-only
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2AsPath4byteCalcLength		1.3.6.1.4.1.6027.20.1.3.5.1.3
This value represents the calculated length of the NEW_AS_PATH according to the rules of the BGP specification. This value is used in route selection.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2AsPath4byteString		1.3.6.1.4.1.6027.20.1.3.5.1.4
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

f10BgpM2AsPath4byteIndex		1.3.6.1.4.1.6027.20.1.3.5.1.5
This value is a unique index for the decomposed AS Path in the f10BgpM2AsPathTable. It is assigned by the agent at the point of creation of the f10BgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2AsPathIndex row instance values across rows of the f10BgpM2AsPathTable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2AsPathTable		1.3.6.1.4.1.6027.20.1.3.6
The BGP-4 Path Attribute AS Path Table contains the per network path (NLRI) AS PATH data received from the advertising BGP peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2AsPathEntry

f10BgpM2AsPathTableEntry		1.3.6.1.4.1.6027.20.1.3.6.1
Information about an AS path provided with a path to a network.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2AsPathEntry

f10BgpM2AsPathSegmentIndex		1.3.6.1.4.1.6027.20.1.3.6.1.1
A per-AS path segment index. This will index a set of autonomous systems in an AS path which are part of the same sequence or set (as determined by the row value of f10BgpM2AsPathType, which should be the same value for each f10BgpM2AsPathTable entry indexed by the same (f10BgpM2PathAttrIndex, f10BgpM2AsPathIndex) pair).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2AsPathElementIndex		1.3.6.1.4.1.6027.20.1.3.6.1.2
A per-AS element index. This will index a particular AS within a sequence or set of autonomous systems in an AS path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2AsPathType		1.3.6.1.4.1.6027.20.1.3.6.1.3
The type of sequence in which this asPath was advertised as an attribute. Note that all asPath row instances for a given (f10BgpM2PathAttrIndex, f10BgpM2AsPathIndex) index pair will have their f10BgpM2AsPathType set to the same value. The values for f10BgpM2AsPathType are interpreted as defined in the base BGP document and the BGP AS Confederations document.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	asSet(1), asSequence(2), confedSequence(3), confedSet(4)

f10BgpM2AsPathElementValue		1.3.6.1.4.1.6027.20.1.3.6.1.4
An AS value for an AS the related NLRI traversed in the propagation of its advertisement. This value is to be interpreted in the context of the sequence implied by f10BgpM2AsPathIndex and f10BgpM2AsPathType (and, in sequence of the other table rows with the same value of f10BgpM2PathAttrIndex and f10BgpM2AsPathIndex).
Status: current	Access: read-only
OBJECT-TYPE
	InetAutonomousSystemNumber

f10BgpM2PathAttrUnknownTable		1.3.6.1.4.1.6027.20.1.3.7
The BGP-4 Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local BGP implementation or not otherwise capable of being returned from this agent. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of such unknown attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PathAttrUnknownEntry

f10BgpM2PathAttrUnknownEntry		1.3.6.1.4.1.6027.20.1.3.7.1
Information about an unknown attribute provided with a path to a network.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PathAttrUnknownEntry

f10BgpM2PathAttrUnknownIndex		1.3.6.1.4.1.6027.20.1.3.7.1.1
An integer index for a row in this table.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PathAttrUnknownType		1.3.6.1.4.1.6027.20.1.3.7.1.2
The attribute type advertised with this unknown attribute by the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PathAttrUnknownValue		1.3.6.1.4.1.6027.20.1.3.7.1.3
Value of path attribute not understood by the base BGP-4 document. Octets beyond the maximum size, if any, are not recorded by this row object.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..4070)

f10BgpM2PathAttrExtensions		1.3.6.1.4.1.6027.20.1.3.8
OBJECT IDENTIFIER

f10BgpM2PathAttrNonCapExts		1.3.6.1.4.1.6027.20.1.3.8.1
OBJECT IDENTIFIER

f10BgpM2PathAttrCapExts		1.3.6.1.4.1.6027.20.1.3.8.2
OBJECT IDENTIFIER

f10BgpM2PathAttrRouteReflectionExts		1.3.6.1.4.1.6027.20.1.3.8.1.2796
OBJECT IDENTIFIER

f10BgpM2PathAttrOriginatorIdTable		1.3.6.1.4.1.6027.20.1.3.8.1.2796.1
Per prefix data pertinent to advertisement of a network prefix through an originator.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PathAttrOriginatorIdEntry

f10BgpM2PathAttrOriginatorIdEntry		1.3.6.1.4.1.6027.20.1.3.8.1.2796.1.1
Each entry contains data pertinent to a network prefix as received through its originating BGP route reflector.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PathAttrOriginatorIdEntry

f10BgpM2PathAttrOriginatorId		1.3.6.1.4.1.6027.20.1.3.8.1.2796.1.1.1
The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute.
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Identifier

f10BgpM2PathAttrClusterTable		1.3.6.1.4.1.6027.20.1.3.8.1.2796.2
The BGP-4 Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PathAttrClusterEntry

f10BgpM2PathAttrClusterEntry		1.3.6.1.4.1.6027.20.1.3.8.1.2796.2.1
Information about a cluster traversal provided with a path to a network.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PathAttrClusterEntry

f10BgpM2PathAttrClusterIndex		1.3.6.1.4.1.6027.20.1.3.8.1.2796.2.1.1
An integral index for a row in this table.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PathAttrClusterValue		1.3.6.1.4.1.6027.20.1.3.8.1.2796.2.1.2
A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as received in the route advertisement will be preserved in the sequence of f10BgpM2PathAttrClusterTable rows (and the f10BgpM2PathAttrClusterValues in each row) as returned for a given f10BgpM2PathAttrIndex value, and the monotonically increasing sequence of f10BgpM2PathAttrClusterIndex values for that f10BgpM2PathAttrIndex.
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Identifier

f10BgpM2PathAttrCommunityExts		1.3.6.1.4.1.6027.20.1.3.8.1.1997
OBJECT IDENTIFIER

f10BgpM2PathAttrCommTable		1.3.6.1.4.1.6027.20.1.3.8.1.1997.1
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PathAttrCommEntry

f10BgpM2PathAttrCommEntry		1.3.6.1.4.1.6027.20.1.3.8.1.1997.1.1
Information about a community association provided with a path to a network.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PathAttrCommEntry

f10BgpM2PathAttrCommIndex		1.3.6.1.4.1.6027.20.1.3.8.1.1997.1.1.1
An integer index for a row in this table.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PathAttrCommValue		1.3.6.1.4.1.6027.20.1.3.8.1.1997.1.1.2
A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics.
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2Community

f10BgpM2PathAttrExtCommTable		1.3.6.1.4.1.6027.20.1.3.8.1.3501
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable). XXX JMH - can not assign the OID until an RFC is published.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2PathAttrExtCommEntry

f10BgpM2PathAttrExtCommEntry		1.3.6.1.4.1.6027.20.1.3.8.1.3501.1
Information about an extended community association provided with a path to a network.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2PathAttrExtCommEntry

f10BgpM2PathAttrExtCommIndex		1.3.6.1.4.1.6027.20.1.3.8.1.3501.1.1
An integral index for a row in this table.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

f10BgpM2PathAttrExtCommValue		1.3.6.1.4.1.6027.20.1.3.8.1.3501.1.2
A value representing an extended community which was received with the route implied by the f10BgpM2PathAttr Index value of this row data. There are certain 8-octet long values which could be returned in this columnar row data that carry additional semantics.
Status: current	Access: read-only
OBJECT-TYPE
	F10BgpM2ExtendedCommunity

f10BgpM2LinkLocalNextHopTable		1.3.6.1.4.1.6027.20.1.3.8.1.2545
Table of link local nexthops as sent by RFC 2545 for IPv6 BGP Speakers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		F10BgpM2LinkLocalNextHopEntry

f10BgpM2LinkLocalNextHopEntry		1.3.6.1.4.1.6027.20.1.3.8.1.2545.1
Entry containing the link-local nexthops as sent by a BGP speaker running RFC 2545 extensions for double-nexthops.
Status: current	Access: not-accessible
OBJECT-TYPE
	F10BgpM2LinkLocalNextHopEntry

f10BgpM2LinkLocalNextHopPresent		1.3.6.1.4.1.6027.20.1.3.8.1.2545.1.1
This value is TRUE if and only if the BGP speaker is receiving IPv6 NLRI using the RFC 2545 double nexthop convention and it has received a link local scope nexthop in addition to the global scope nexthop.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

f10BgpM2LinkLocalNextHop		1.3.6.1.4.1.6027.20.1.3.8.1.2545.1.2
This value contains an IPv6 link local address of InetAddressType of type ipv6z. This value is only present if f10BgpM2LinkLocalNextHopPresent is true.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(20)

f10BgpM2Conformance		1.3.6.1.4.1.6027.20.1.4
OBJECT IDENTIFIER

f10BgpM2MIBCompliances		1.3.6.1.4.1.6027.20.1.4.1
OBJECT IDENTIFIER

f10BgpM2MIBGroups		1.3.6.1.4.1.6027.20.1.4.2
OBJECT IDENTIFIER

f10BgpM2MIBCompliance		1.3.6.1.4.1.6027.20.1.4.1.1
The compliance statement for entities which implement the BGP4 mib.
Status: current	Access: read-only
MODULE-COMPLIANCE

f10BgpM2CommunitiesGroup		1.3.6.1.4.1.6027.20.1.4.2.1
Objects associated with BGP communities.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2ExtCommunitiesGroup		1.3.6.1.4.1.6027.20.1.4.2.2
Objects associated with BGP extended communities.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2RouteReflectionGroup		1.3.6.1.4.1.6027.20.1.4.2.3
Objects associated with BGP route reflection.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2AsConfederationGroup		1.3.6.1.4.1.6027.20.1.4.2.4
Objects associated with BGP confederation membership.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2TimersGroup		1.3.6.1.4.1.6027.20.1.4.2.5
Objects associated with BGP peering timers.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2CountersGroup		1.3.6.1.4.1.6027.20.1.4.2.6
Objects to count discrete events and exchanges on BGP sessions.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2CapabilitiesGroup		1.3.6.1.4.1.6027.20.1.4.2.7
Objects to report capabilities as received on BGP sessions.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2AsPathGroup		1.3.6.1.4.1.6027.20.1.4.2.8
Objects to report AS paths received on BGP NLRIs.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2As4byteGroup		1.3.6.1.4.1.6027.20.1.4.2.9
AS Size objects.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2BaseGroup		1.3.6.1.4.1.6027.20.1.4.2.10
Basic objects in local BGP implementation.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2ErrorsGroup		1.3.6.1.4.1.6027.20.1.4.2.11
Errors received on BGP peering sessions.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2PeerGroup		1.3.6.1.4.1.6027.20.1.4.2.12
Core object types on BGP peering sessions.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2PathAttributesGroup		1.3.6.1.4.1.6027.20.1.4.2.13
Attributes received on BGP peering sessions.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2PeerConfigurationGroup		1.3.6.1.4.1.6027.20.1.4.2.14
Configuration objects for BGP peers.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2PeerRouteReflectorCfgGroup		1.3.6.1.4.1.6027.20.1.4.2.15
Configuration objects for BGP peers that support route reflection.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2PeerAsConfederationCfgGroup		1.3.6.1.4.1.6027.20.1.4.2.16
Configuration objects for BGP peers that support BGP confederations.
Status: current	Access: read-only
OBJECT-GROUP

f10BgpM2MIBNotificationsGroup		1.3.6.1.4.1.6027.20.1.4.2.17
This group contains objects for notifications supported by this mib module.
Status: current	Access: read-only
NOTIFICATION-GROUP

f10BgpM2Rfc2545Group		1.3.6.1.4.1.6027.20.1.4.2.18
This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545.
Status: current	Access: read-only
OBJECT-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor