FLARION-MIB

File: FLARION-MIB.mib (142206 bytes)

Imported modules

SNMPv2-SMI RFC1155-SMI SNMPv2-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress TimeTicks Unsigned32
Counter32 enterprises DisplayString
RowStatus DateAndTime TruthValue

Defined Types

AdminState  
INTEGER up(1), down(2), reset(3)    

MaintState  
INTEGER unknown(0), active(1), activeCampOn(2), activeAlarm(3), outOfService(4), maintenance(5), standby(6), dspInit(7), pendingDisable(8)    

BbuState  
INTEGER null(0), active(1), disabled(2), standby(3), unknown(4), pendActiveStandby(5), disabledStandby(6), outOfService(7), nonOperational(8), notAvailable(9)    

EventType  
INTEGER communication(1), qualityOfService(2), processingError(3), equipment(4), environment(5)    

AlarmSeverity  
INTEGER indeterminate(0), cleared(1), warning(2), minor(3), major(4), critical(5)    

ProbableCause  
INTEGER adapterError(1), applicationSubsystemFailure(2), bandwidthReduced(3), callEstablishmentError(4), communicationsProtocolError(5), communicationsSubsystemFailure(6), configurationOrCustomizationError(7), congestion(8), corruptData(9), cpuCyclesLimitExceeded(10), datasetOrModemError(11), degradedSignal(12), enclosureDoorOpen(13), equipmentMalfunction(14), fileError(15), framingError(16), heatingOrVentilationOrCoolingSystemProblem(17), inputOutputDeviceError(18), inputDeviceError(19), lanError(20), localNodeTransmissionError(21), lossOfFrame(22), lossOfSignal(23), outOfMemory(24), outputDeviceError(25), performanceDegraded(26), powerProblem(27), processorProblem(28), queueSizeExceeded(29), receiveFailure(30), receiverFailure(31), remoteNodeTransmissionError(32), resourceAtOrNearingCapacity(33), responseTimeExcessive(34), retransmissionRateExcessive(35), softwareError(36), softwareProgramAbnormallyTerminated(37), softwareProgramError(38), storageCapacityProblem(39), temperatureUnacceptable(40), thresholdCrossed(41), timingProblem(42), transmitFailure(43), transmitterFailure(44), underlyingResourceUnavailable(45), userDefinedAlarm(46), versionMismatch(47)    

AddtlInfo  
OCTET STRING Size(0..1024)    

HwAddress  
OCTET STRING Size(8)    

MobileEui  
OCTET STRING Size(8)    

CommandID  
INTEGER enable(1), disable(2), reset(8)    

MoType  
INTEGER mainController(1), baseBandUnit(2), rfUnit(3), dsp(4), mobile(5), software(6), powerAmp(7), backhaul(8), rxUnit(12), txUnit(13), alarmInterfaceUnit(14), powerControlUnit(15), alarmInput(16), relay(17), lowNoiseAmplifier(18), cabinet(19), powerAmpShelf(20), radioRouterShelf(21), rectifier(22), mlppp(23)    

LogLevel  
INTEGER logEmerg(0), logAlert(1), logCrit(2), logErr(3), logWarning(4), logNotice(5), logInfo(6), logDebug(7)    

DownloadState  
INTEGER unknown(0), idle(1), inProgress(2), success(3), failed(4)    

SysAction  
INTEGER restart(1), reboot(2)    

OsUpgradeType  
INTEGER binary(1), standard(2)    

MediaType  
INTEGER mediaUnknown(0), mediaHdd(1), mediaFlashDrive(2)    

RouteProtocol  
INTEGER rtProtocolNone(0), rtProtocolRIPv2(1)    

RouteHandling  
INTEGER rtHandlingNoSuperNetSupport(0), rtHandlingReject(1), rtHandlingBlackhole(2)    

FloatAsString  
DisplayString    

FloatAsInt  
INTEGER    

PassFail  
INTEGER pass(1), fail(2)    

OnOffState  
INTEGER on(1), off(2)    

AclEntry  
SEQUENCE    
  aclIndex INTEGER
  aclAddress DisplayString
  aclStatus RowStatus

ScratchPadEntry  
SEQUENCE    
  scratchPadIndex INTEGER
  scratchPadNote DisplayString
  scratchPadStatus RowStatus

PgBackoffFctrsEntry  
SEQUENCE    
  pgBackoffFctrIndex INTEGER
  pgBackoffTimeoutFactor INTEGER

NtpServerEntry  
SEQUENCE    
  ntpServerIndex INTEGER
  ntpServerEnabled TruthValue
  ntpServerId DisplayString

DhcpDnsServerEntry  
SEQUENCE    
  dhcpDnsIndex INTEGER
  dhcpDnsIpAddr IpAddress

AaRadServEntry  
SEQUENCE    
  aaRadServIndex INTEGER
  aaRadServValid TruthValue
  aaRadServName DisplayString
  aaRadServIpAddr IpAddress
  aaRadServUdpPort INTEGER
  aaRadServSecret DisplayString

AcntRadServEntry  
SEQUENCE    
  acntRadServIndex INTEGER
  acntRadServValid TruthValue
  acntRadServName DisplayString
  acntRadServAddr IpAddress
  acntRadServPort INTEGER
  acntRadServSecret DisplayString

BbuEntry  
SEQUENCE    
  bbuId INTEGER
  bbuIpAddress IpAddress
  bbuAdminState AdminState
  bbuOperState BbuState
  bbuReset TruthValue
  bbuHwVer DisplayString
  bbuBootromVer DisplayString

MobileEntry  
SEQUENCE    
  mobileEui MobileEui
  mobileScrub TruthValue

MobileSectorEntry  
SEQUENCE    
  mobileSectorEui MobileEui
  mobileSectorId INTEGER
  mobileSectorMipLifetime Unsigned32
  mobileSectorNai DisplayString
  mobileSectorL2State DisplayString
  mobileSectorQosProfile DisplayString
  mobileSectorAaaIp DisplayString
  mobileSectorAaaHa DisplayString
  mobileSectorActiveIp DisplayString
  mobileSectorActiveHa DisplayString
  mobileSectorFramedMtuSize Unsigned32
  mobileSectorMipAuthAlg DisplayString
  mobileSectorNaiReg Unsigned32
  mobileSectorIdleTimeout Unsigned32
  mobileSectorAcntInterval Unsigned32
  mobileSectorVendorId Unsigned32
  mobileSectorVersion OCTET STRING

MobileActiveEntry  
SEQUENCE    
  mobileActiveSectorId INTEGER
  mobileActiveIndex INTEGER
  mobileActiveEui MobileEui
  mobileActiveIpAddr IpAddress
  mobileActiveVersion DisplayString

SectorEntry  
SEQUENCE    
  sectorId INTEGER
  sectorBbu INTEGER

WanBladeEntry  
SEQUENCE    
  wanBladeId INTEGER
  wanBladeValid TruthValue

WanClock  
INTEGER external(0), internal(1)    

WanBitRate  
INTEGER bitRate64k(0), bitRate56k(1)    

WanLineCoding  
INTEGER lineCodingAMI(0), lineCodingB8ZS(1), lineCodingHDB3(2)    

WanLineMode  
INTEGER lineModeESF(0), lineModeD4(1), lineModeG704(2), lineModeG704CRC(3), lineModeUf(4)    

WanLineGain  
INTEGER lineGain36db(0), lineGain30db(1)    

WanLineBuildOut  
INTEGER lbo1Mile(0), lbo2Mile(1), lbo3Mile(2), lbo4Mile(3)    

WanPolarity  
INTEGER normalData(0), invertedData(1)    

WanFeatureState  
INTEGER featureDisabled(0), featureEnabled(1)    

WanJitterAttenuation  
INTEGER jitterAttenTx(0), jitterAttenRx(1)    

WanLoopbackMode  
INTEGER wanLoopbackNone(0), wanLoopbackInternal(1), wanLoopbackExternal(2)    

WanCrcMode  
INTEGER wanCrcNone(0), wanCrc16(1), wanCrc32(2)    

WanPortEntry  
SEQUENCE    
  wanPortBladeId INTEGER
  wanPortId INTEGER
  wanTxBufferSize INTEGER
  wanTxBuffers INTEGER
  wanTxMaxPending INTEGER
  wanRxBufferSize INTEGER
  wanRxBuffers INTEGER
  wanMaxRxFrameSize INTEGER
  wanLoopback WanLoopbackMode
  wanCrcMode WanCrcMode
  wanClocking WanClock
  wanDataRate WanBitRate
  wanCoding WanLineCoding
  wanFraming WanLineMode
  wanRxGain WanLineGain
  wanLbo WanLineBuildOut
  wanPolarity WanPolarity
  wanPulse WanFeatureState
  wanJitter WanFeatureState
  wanJitterSide WanJitterAttenuation
  wanChan1to8 WanFeatureState
  wanChan9to16 WanFeatureState
  wanChan17to24 WanFeatureState
  wanChan25to32 WanFeatureState
  wanPortValid TruthValue

BundleEntry  
SEQUENCE    
  bundleId INTEGER
  bundleValid TruthValue
  bundleMultilink WanFeatureState
  bundleCompression WanFeatureState
  bundleInterface DisplayString
  bundleLinkChap WanFeatureState
  bundleLinkPap WanFeatureState
  bundleLinkMru INTEGER
  bundleLinkMtu INTEGER
  bundleLinkKeepAliveIntvl INTEGER
  bundleLinkKeepAliveDur INTEGER
  bundleLinkAcfComp WanFeatureState
  bundleLinkProtoComp WanFeatureState
  bundleIfaceOnDemand WanFeatureState
  bundleIfaceIdleTimeout INTEGER
  bundleIpcpVjComp WanFeatureState
  bundleIpcpDns IpAddress
  bundleIpcpNbns IpAddress
  bundleIpcpLocalIpAddr DisplayString
  bundleIpcpPeerIpAddr DisplayString
  bundleRouteHandling RouteHandling

WanlinksEntry  
SEQUENCE    
  wanlinksBundleId INTEGER
  wanlinksId INTEGER
  wanlinksInBundle TruthValue

IfaceRouteEntry  
SEQUENCE    
  ifaceRtBundleId INTEGER
  ifaceRouteId INTEGER
  ifaceRoute DisplayString

BhQosGroupEntry  
SEQUENCE    
  bhQosGroupIndex INTEGER
  bhQosGroupName DisplayString
  bhQosGroupStatus RowStatus

BhQosGroupClassEntry  
SEQUENCE    
  bhQosGroupIndex1 INTEGER
  bhQosGroupClassIndex INTEGER
  bhQosGroupClassName DisplayString
  bhQosGroupClassStatus RowStatus

BhQosGroupFilterEntry  
SEQUENCE    
  bhQosGroupIndex2 INTEGER
  bhQosGroupFilterIndex INTEGER
  bhQosGroupFilterName DisplayString
  bhQosGroupFilterStatus RowStatus

BhQosGroupMarkerEntry  
SEQUENCE    
  bhQosGroupIndex3 INTEGER
  bhQosGroupMarkerIndex INTEGER
  bhQosGroupMarkerName DisplayString
  bhQosGroupMarkerStatus RowStatus

ActivePkgTableEntry  
SEQUENCE    
  activePkgIndex INTEGER
  activePkgName DisplayString

StandbyPkgTableEntry  
SEQUENCE    
  standbyPkgIndex INTEGER
  standbyPkgName DisplayString

DnsNameServerEntry  
SEQUENCE    
  dnsNameServerIndex INTEGER
  dnsNameServerAddr IpAddress

DnsSearchEntry  
SEQUENCE    
  dnsSearchIndex INTEGER
  dnsSearchDomain DisplayString

RouteProvEntry  
SEQUENCE    
  routeProvIndex INTEGER
  routeProvName DisplayString
  routeProvStatus RowStatus

RouteRuntimeEntry  
SEQUENCE    
  routeRuntimeIndex INTEGER
  routeRuntimeName DisplayString

UserGroupEntry  
SEQUENCE    
  userGroupIndex INTEGER
  userGroupName DisplayString
  userGroupStatus RowStatus
  userGroupUlRateCap INTEGER
  userGroupDlRateCap INTEGER

GroupRulesEntry  
SEQUENCE    
  groupIndex INTEGER
  groupRuleIndex INTEGER
  groupRuleName DisplayString
  groupRuleStatus RowStatus

GroupStreamsEntry  
SEQUENCE    
  groupIndex1 INTEGER
  groupStreamIndex INTEGER
  groupStreamUlRateCap INTEGER
  groupStreamDlRateCap INTEGER
  groupStreamUlTokenGain INTEGER
  groupStreamDlTokenGain INTEGER

TrapTableEntry  
SEQUENCE    
  trapIndex INTEGER
  trapEnable TruthValue
  trapCommunity DisplayString
  trapAddr IpAddress
  trapPort INTEGER
  trapSendCritical TruthValue
  trapSendMajor TruthValue
  trapSendMinor TruthValue
  trapSendWarning TruthValue
  trapSendCleared TruthValue

TrapHistEntry  
SEQUENCE    
  trapHistIndex INTEGER
  trapHistOid OBJECT IDENTIFIER
  trapHistMoType MoType
  trapHistMoId INTEGER
  trapHistTime TimeTicks
  trapHistInfo DisplayString
  trapHistTimestamp INTEGER
  trapHistSeqNum INTEGER

TrapProvEntry  
SEQUENCE    
  trapProvIndex INTEGER
  trapProvName DisplayString
  trapProvEnable TruthValue

CtServerEntry  
SEQUENCE    
  ctServerIndex INTEGER
  ctServerValid TruthValue
  ctServerName DisplayString
  ctServerAddr IpAddress
  ctServerPort INTEGER
  ctServerSecret DisplayString

UpgradeReleaseEntry  
SEQUENCE    
  releaseIndex INTEGER
  releaseVersion DisplayString

AlarmEntry  
SEQUENCE    
  alarmIndex INTEGER
  alarmName DisplayString
  alarmSeverity AlarmSeverity
  alarmMoType MoType
  alarmMoId INTEGER
  alarmSector INTEGER
  alarmTime TimeTicks
  alarmTimestamp INTEGER

Defined Values

flarion 1.3.6.1.4.1.8603
The MIB module for managing Flarion products.
MODULE-IDENTITY    

mibs 1.3.6.1.4.1.8603.1
OBJECT IDENTIFIER    

oem 1.3.6.1.4.1.8603.3
OBJECT IDENTIFIER    

rrCommonMib 1.3.6.1.4.1.8603.1.1
OBJECT IDENTIFIER    

rrMib 1.3.6.1.4.1.8603.1.2
OBJECT IDENTIFIER    

rrTrapVars 1.3.6.1.4.1.8603.1.1.1
OBJECT IDENTIFIER    

rrTraps 1.3.6.1.4.1.8603.1.1.2
OBJECT IDENTIFIER    

rrTrapConfig 1.3.6.1.4.1.8603.1.1.4
OBJECT IDENTIFIER    

rrTrapHistory 1.3.6.1.4.1.8603.1.1.5
OBJECT IDENTIFIER    

rrTimeStamp 1.3.6.1.4.1.8603.1.1.1.1
The time at which the event was generated. This value is expressed in seconds since 00:00:00 UTC, January 1, 1970 (see time(2)).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

rrSeqNum 1.3.6.1.4.1.8603.1.1.1.2
The event sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rrSeverity 1.3.6.1.4.1.8603.1.1.1.3
The event severity.
Status: current Access: read-only
OBJECT-TYPE    
  AlarmSeverity  

rrMoType 1.3.6.1.4.1.8603.1.1.1.4
Type managed object associated with this trap.
Status: current Access: read-only
OBJECT-TYPE    
  MoType  

rrMoId 1.3.6.1.4.1.8603.1.1.1.5
The instance of the managed object logical identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

rrAddtlInfo 1.3.6.1.4.1.8603.1.1.1.6
Event description.
Status: current Access: read-only
OBJECT-TYPE    
  AddtlInfo  

rrManagedObjs 1.3.6.1.4.1.8603.1.2.1
OBJECT IDENTIFIER    

rrAlarms 1.3.6.1.4.1.8603.1.2.10
OBJECT IDENTIFIER    

rrBaseStation 1.3.6.1.4.1.8603.1.2.1.1
OBJECT IDENTIFIER    

rrBaseBandUnit 1.3.6.1.4.1.8603.1.2.1.2
OBJECT IDENTIFIER    

rrMobile 1.3.6.1.4.1.8603.1.2.1.4
OBJECT IDENTIFIER    

rrBackHaulUnit 1.3.6.1.4.1.8603.1.2.1.5
OBJECT IDENTIFIER    

rrSector 1.3.6.1.4.1.8603.1.2.1.10
OBJECT IDENTIFIER    

rrBsInfo 1.3.6.1.4.1.8603.1.2.1.1.1
OBJECT IDENTIFIER    

rrForeignAgent 1.3.6.1.4.1.8603.1.2.1.1.2
OBJECT IDENTIFIER    

rrPaging 1.3.6.1.4.1.8603.1.2.1.1.4
OBJECT IDENTIFIER    

rrNtp 1.3.6.1.4.1.8603.1.2.1.1.5
OBJECT IDENTIFIER    

rrDhcp 1.3.6.1.4.1.8603.1.2.1.1.8
OBJECT IDENTIFIER    

rrAuthServer 1.3.6.1.4.1.8603.1.2.1.1.9
OBJECT IDENTIFIER    

rrAccountingServer 1.3.6.1.4.1.8603.1.2.1.1.10
OBJECT IDENTIFIER    

rrRelease 1.3.6.1.4.1.8603.1.2.1.1.12
OBJECT IDENTIFIER    

rrDns 1.3.6.1.4.1.8603.1.2.1.1.13
OBJECT IDENTIFIER    

rrRoutes 1.3.6.1.4.1.8603.1.2.1.1.14
OBJECT IDENTIFIER    

rrUserGroups 1.3.6.1.4.1.8603.1.2.1.1.15
OBJECT IDENTIFIER    

rrCtCore 1.3.6.1.4.1.8603.1.2.1.1.16
OBJECT IDENTIFIER    

rrL2AdmissionCtrl 1.3.6.1.4.1.8603.1.2.1.1.17
OBJECT IDENTIFIER    

rrUpgrade 1.3.6.1.4.1.8603.1.2.1.1.18
OBJECT IDENTIFIER    

rrIgmp 1.3.6.1.4.1.8603.1.2.1.1.19
OBJECT IDENTIFIER    

rrBhQos 1.3.6.1.4.1.8603.1.2.1.1.20
OBJECT IDENTIFIER    

rrBsAlarmState 1.3.6.1.4.1.8603.1.2.1.1.1.1
Base station current highest alarm severity.
Status: deprecated Access: read-only
OBJECT-TYPE    
  AlarmSeverity  

rrBsMaintState 1.3.6.1.4.1.8603.1.2.1.1.1.2
Base station maintance State.
Status: deprecated Access: read-only
OBJECT-TYPE    
  MaintState  

rrBsVersion 1.3.6.1.4.1.8603.1.2.1.1.1.3
Base station software image version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rrBsMibVersion 1.3.6.1.4.1.8603.1.2.1.1.1.7
The current Flarion MIB version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rrBsDbAuditResult 1.3.6.1.4.1.8603.1.2.1.1.1.8
The result of the basestation database audit.
Status: current Access: read-only
OBJECT-TYPE    
  PassFail  

aclTable 1.3.6.1.4.1.8603.1.2.1.1.1.9
This table is used to configure the SNMP access control list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AclEntry

aclEntry 1.3.6.1.4.1.8603.1.2.1.1.1.9.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AclEntry  

aclIndex 1.3.6.1.4.1.8603.1.2.1.1.1.9.1.1
The table index value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

aclAddress 1.3.6.1.4.1.8603.1.2.1.1.1.9.1.2
A get on this object returns the ACL address. A new ACL address can be added by first creating a conceptual row by setting aclStatus to createAndWait(5). Then set this object with the ACL address value. Finally, commit the value by setting aclStatus to active(1).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

aclStatus 1.3.6.1.4.1.8603.1.2.1.1.1.9.1.3
This object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

scratchPadTable 1.3.6.1.4.1.8603.1.2.1.1.1.10
This table is used to enter miscellaneous notes .
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ScratchPadEntry

scratchPadEntry 1.3.6.1.4.1.8603.1.2.1.1.1.10.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ScratchPadEntry  

scratchPadIndex 1.3.6.1.4.1.8603.1.2.1.1.1.10.1.1
The table index value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

scratchPadNote 1.3.6.1.4.1.8603.1.2.1.1.1.10.1.2
A get on this object returns the scratch pad note. A new note can be added by first setting scratchPadStatus to createAndWait(5) to create the conceptual row. Then set this object with the new value. Finally, commit the value by setting scratchPadStatus to active(1).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

scratchPadStatus 1.3.6.1.4.1.8603.1.2.1.1.1.10.1.3
This object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

faProv 1.3.6.1.4.1.8603.1.2.1.1.2.1
OBJECT IDENTIFIER    

faStats 1.3.6.1.4.1.8603.1.2.1.1.2.2
OBJECT IDENTIFIER    

faTosVal 1.3.6.1.4.1.8603.1.2.1.1.2.1.2
Mobile IP Type of Service value (refer to RFC 791).
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

faMipLifetime 1.3.6.1.4.1.8603.1.2.1.1.2.1.3
Maximum lifetime advertised for this FA. The lifetime is defined in seconds, default value is 400. The request timer will be limited with this value. Special case: 65535 (or more) seconds mean unlimited time (the binding will not expire).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

faTunnelLifetime 1.3.6.1.4.1.8603.1.2.1.1.2.1.4
Lifetime of the temporary home entry (tunnel), in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

faRrepRt 1.3.6.1.4.1.8603.1.2.1.1.2.1.5
Time to wait for RREP after sending a RREQ, in msec.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

faOutgoingTimer 1.3.6.1.4.1.8603.1.2.1.1.2.1.6
Outgoing handoff time, in msec.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

faRegistrationTimer 1.3.6.1.4.1.8603.1.2.1.1.2.1.8
Amount of time a mobile has to register, in msec.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

faMbbSupport 1.3.6.1.4.1.8603.1.2.1.1.2.1.11
Make-Before-Break handoff support. When enabled, during a handoff, the old Foreign Agent waits until the airlink to the mobile drops before it uses the temporary tunnel between FA's.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

faTrashLogLevel 1.3.6.1.4.1.8603.1.2.1.1.2.1.12
Trash logs above specified level. The higher the level, the more logs generated by the Foreign Agent.
Status: current Access: read-write
OBJECT-TYPE    
  LogLevel  

faMipDscp 1.3.6.1.4.1.8603.1.2.1.1.2.1.13
Mobile IP Diffserv codepoint.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

faIcmp 1.3.6.1.4.1.8603.1.2.1.1.2.2.2
OBJECT IDENTIFIER    

faMipReg 1.3.6.1.4.1.8603.1.2.1.1.2.2.3
OBJECT IDENTIFIER    

faExtensions 1.3.6.1.4.1.8603.1.2.1.1.2.2.4
OBJECT IDENTIFIER    

faRouteOptimization 1.3.6.1.4.1.8603.1.2.1.1.2.2.5
OBJECT IDENTIFIER    

faNumMobilesServed 1.3.6.1.4.1.8603.1.2.1.1.2.2.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faFaaSent 1.3.6.1.4.1.8603.1.2.1.1.2.2.2.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faFaaResponseAs 1.3.6.1.4.1.8603.1.2.1.1.2.2.2.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faAsRecvd 1.3.6.1.4.1.8603.1.2.1.1.2.2.2.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqRecvd 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqRelayed 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedUnspec 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedAdminProhib 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedNoResource 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedFailAuth 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedLifeTooLong 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedPoorlyFormed 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedEncapUnavail 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.9
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedHaUnreach 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.10
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedMissingNai 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.11
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedMissingChal 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.12
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedUnknownChal 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.13
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedInvalidCoa 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.14
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedUnknownHa 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.15
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedRevTunlUnavail 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.16
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedRegTimeout 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.17
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRreqDeniedFailedVendor 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.18
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRrepRecvd 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.19
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRrepRelayed 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.20
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faRrepSent 1.3.6.1.4.1.8603.1.2.1.1.2.2.3.21
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faPfaneExtRecvd 1.3.6.1.4.1.8603.1.2.1.1.2.2.4.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faMnChalExtRecvd 1.3.6.1.4.1.8603.1.2.1.1.2.2.4.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faMnFaAuthRecvd 1.3.6.1.4.1.8603.1.2.1.1.2.2.4.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faMnNaiExtRecvd 1.3.6.1.4.1.8603.1.2.1.1.2.2.4.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faBuSent 1.3.6.1.4.1.8603.1.2.1.1.2.2.5.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

faBuRecvd 1.3.6.1.4.1.8603.1.2.1.1.2.2.5.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

pagingProv 1.3.6.1.4.1.8603.1.2.1.1.4.1
OBJECT IDENTIFIER    

pagingStats 1.3.6.1.4.1.8603.1.2.1.1.4.2
OBJECT IDENTIFIER    

pgUdpPort 1.3.6.1.4.1.8603.1.2.1.1.4.1.1
UDP port for Page Requests/Repsonse packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgLuUdpPort 1.3.6.1.4.1.8603.1.2.1.1.4.1.2
UDP port for Location Update/Acks and Naks.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgApaProv 1.3.6.1.4.1.8603.1.2.1.1.4.1.6
OBJECT IDENTIFIER    

pgApaRateBiasTime 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.1
Page request round trip (bias) time, in msec. Time added to compute page backoff timeout (for retransmission of page requests).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

pgApaMonIntvlFctrs 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.2
Factor multiplied by monitoring interval. This is added to pageApaRateBiasTime to make up the page backoff timeout. The monitoring interval itself, is sent to the APA in a L3 Sleep message.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgApaBackoffFctrsTable 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.4
Table of Area Paging backoff timeout factors. For each retransmission of a page request, the page backoff timeout (2000 msec) is multiplied by the page backoff timeout factor for that retransmission.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PgBackoffFctrsEntry

pgBackoffFctrsEntry 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.4.1
Area Paging backoff timeout factors table entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  PgBackoffFctrsEntry  

pgBackoffFctrIndex 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.4.1.1
The backoff timeout factor table index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

pgBackoffTimeoutFactor 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.4.1.2
The backoff timeout factor.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgApaIntvlTimeout 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.5
When the page process starts, paging retransmissions will continue until either the target wakes-up or this timer expires. Recommended value is 20.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgApaIntvlTimeoutAction 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.6
This indicates the state clearing policy following an interval timeout: none Remain in paging (just clear LPA Page List). reset Clean up and return to mobile to SLEEPING state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), reset(1)  

pgApaSuppressTimeout 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.7
Page Suppress Timeout in seconds. This timeout is the amount of time that we suppress pages for after receiving a page response with Access indicator.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgApaLuSpoofSupport 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.8
Indicates whether spoof support is enabled or not. This determines how the list of LPAs is managed (slide / no slide).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

pgApaListLimit 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.9
Maximum number of Location Updates from basestation that will be saved in the basestation list as a result of receiving location updates. If this value is reached, a NAK packet is sent to the LPA at the basestation that sent the update causing the limit to be reached.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgApaFwRuleNum 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.10
Firewall rule number used in setting up rule for diverting location updates to the divert socket for location updates.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgApaMobilesLuThreshPct 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.11
Percentage applied to the maximum number of sleeping mobiles allowed. Used in computing the number of sleeping mobiles LU threshold. This is used to avoid service disruptions in over-loaded cells.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgApaTrashLogLevel 1.3.6.1.4.1.8603.1.2.1.1.4.1.6.12
Log messages with levels above the specified value will not be logged.
Status: current Access: read-write
OBJECT-TYPE    
  LogLevel  

pgLpaProv 1.3.6.1.4.1.8603.1.2.1.1.4.1.7
OBJECT IDENTIFIER    

pgLpaL2PageTimeout 1.3.6.1.4.1.8603.1.2.1.1.4.1.7.1
L2 Page Timeout. Timeout in seconds for which we will continue to wait for the mobile to go through access or to receive an L2 Page Response for presence test.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgLpaSpoofThreshold 1.3.6.1.4.1.8603.1.2.1.1.4.1.7.2
The rate of failure of Location Update Requests below which anti-spoof mechanism kicks in.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgLpaBiasFactor 1.3.6.1.4.1.8603.1.2.1.1.4.1.7.3
The factor which regulates the effect past failures have on the exponential weighted average.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

pgLpaSpoofInterval 1.3.6.1.4.1.8603.1.2.1.1.4.1.7.4
LPA spoof interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

pgLpaTrashLogLevel 1.3.6.1.4.1.8603.1.2.1.1.4.1.7.5
Log messages with levels above the specified value will not be logged.
Status: current Access: read-write
OBJECT-TYPE    
  LogLevel  

pgApaStats 1.3.6.1.4.1.8603.1.2.1.1.4.2.1
OBJECT IDENTIFIER    

pgLpaStats 1.3.6.1.4.1.8603.1.2.1.1.4.2.2
OBJECT IDENTIFIER    

pgApaMobilesSleeping 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.1
Number of mobiles currently sleeping.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaMobilesBeingPaged 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.2
Number of mobiles currently being paged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaL3PgReqPktsSent 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.9
Number of L3 Page Request Packets sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaL3PgRspPktsRcvd 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.10
Number L3 Page Response Packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaL3AccessRspsRcvd 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.11
Number L3 Page Responses with Access received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaL3AliveRspsRcvd 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.12
Number of L3 Page Responses with Alive received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaL3LusRcvd 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.13
Number of L3 Location Updates received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaL3LuAcksSent 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.14
Number of L3 Location Acks sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaPageIntvlTimeouts 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.15
Number of times a page interval timeout occurred.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaPageSuppressTimeouts 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.16
Number of Page Suppress Timeouts.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgApaPageBackoffTimeouts 1.3.6.1.4.1.8603.1.2.1.1.4.2.1.17
Number of times backoff timers went off.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgLpaMobilesBeingPaged 1.3.6.1.4.1.8603.1.2.1.1.4.2.2.2
Number of mobiles currently being paged.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgLpaL3PgReqPktRcvd 1.3.6.1.4.1.8603.1.2.1.1.4.2.2.9
Number of L3 Page Request Packet received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgLpaL3PgRspPktSent 1.3.6.1.4.1.8603.1.2.1.1.4.2.2.11
Number of L3 Page Responses sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgLpaL2PgIntvlTimeouts 1.3.6.1.4.1.8603.1.2.1.1.4.2.2.12
Number of times L2 Page Requests timed out (no L3 Up).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgLpaLocUpdPktSent 1.3.6.1.4.1.8603.1.2.1.1.4.2.2.16
Number of Location Update Packet messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

pgLpaLocUpdRspPktRcvd 1.3.6.1.4.1.8603.1.2.1.1.4.2.2.17
Number of Location Update Response Packet messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ntpServerTable 1.3.6.1.4.1.8603.1.2.1.1.5.2
Table of NTP servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtpServerEntry

ntpServerEntry 1.3.6.1.4.1.8603.1.2.1.1.5.2.1
NTP server table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtpServerEntry  

ntpServerIndex 1.3.6.1.4.1.8603.1.2.1.1.5.2.1.1
NTP server index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ntpServerEnabled 1.3.6.1.4.1.8603.1.2.1.1.5.2.1.2
Indicates if this NTP server entry is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntpServerId 1.3.6.1.4.1.8603.1.2.1.1.5.2.1.3
NTP DNS name or IP address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

dhcpProv 1.3.6.1.4.1.8603.1.2.1.1.8.1
OBJECT IDENTIFIER    

dhcpUseSysDns 1.3.6.1.4.1.8603.1.2.1.1.8.1.1
Indicates if DHCP uses the MCU DNS settings.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dhcpDnsServerTable 1.3.6.1.4.1.8603.1.2.1.1.8.1.2
Table of DHCP DNS servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpDnsServerEntry

dhcpDnsServerEntry 1.3.6.1.4.1.8603.1.2.1.1.8.1.2.1
DHCP DNS server table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpDnsServerEntry  

dhcpDnsIndex 1.3.6.1.4.1.8603.1.2.1.1.8.1.2.1.1
DHCP DNS server index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpDnsIpAddr 1.3.6.1.4.1.8603.1.2.1.1.8.1.2.1.2
DHCP DNS IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpServerIpAddr 1.3.6.1.4.1.8603.1.2.1.1.8.1.3
This represents the DHCP Server IP Address which is returned in any DHCP protocol packet in the siaddr field
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

aaProv 1.3.6.1.4.1.8603.1.2.1.1.9.1
OBJECT IDENTIFIER    

aaServerTimeout 1.3.6.1.4.1.8603.1.2.1.1.9.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..2000  

aaServerRetry 1.3.6.1.4.1.8603.1.2.1.1.9.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

aaServerTrashLogLevel 1.3.6.1.4.1.8603.1.2.1.1.9.1.8
Log messages with levels above the specified value will not be logged.
Status: current Access: read-write
OBJECT-TYPE    
  LogLevel  

aaRadServTable 1.3.6.1.4.1.8603.1.2.1.1.9.1.11
Table of RADIUS servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AaRadServEntry

aaRadServEntry 1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1
RADIUS server table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AaRadServEntry  

aaRadServIndex 1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.1
RADIUS server index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

aaRadServValid 1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.2
Indicates if this RADIUS server entry is valid.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

aaRadServName 1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.3
RADIUS server name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

aaRadServIpAddr 1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.4
RADIUS server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

aaRadServUdpPort 1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.5
RADIUS server UDP port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

aaRadServSecret 1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.6
RADIUS server secret key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acntRadiusStatus 1.3.6.1.4.1.8603.1.2.1.1.10.1
RADIUS server status
Status: current Access: read-only
OBJECT-TYPE    
  AdminState  

acntProv 1.3.6.1.4.1.8603.1.2.1.1.10.2
OBJECT IDENTIFIER    

acntRadServTable 1.3.6.1.4.1.8603.1.2.1.1.10.2.1
Table of RADIUS servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcntRadServEntry

acntRadServEntry 1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1
RADIUS server table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcntRadServEntry  

acntRadServIndex 1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.1
RADIUS server index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acntRadServValid 1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.2
Indicates if this RADIUS server entry is valid.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acntRadServName 1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.3
RADIUS server name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acntRadServAddr 1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.4
RADIUS server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

acntRadServPort 1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.5
RADIUS server port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

acntRadServSecret 1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.6
RADIUS server secret key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

acntRadServTimeout 1.3.6.1.4.1.8603.1.2.1.1.10.2.2
RADIUS server timeout.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acntRadServRetry 1.3.6.1.4.1.8603.1.2.1.1.10.2.3
RADIUS server maximum retry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acntDelaySend 1.3.6.1.4.1.8603.1.2.1.1.10.2.4
Include delay attribute.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acntServDownHd 1.3.6.1.4.1.8603.1.2.1.1.10.2.5
Server down handling.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acntL2UpDebounce 1.3.6.1.4.1.8603.1.2.1.1.10.2.6
L2Up debounce time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acntDoPerRAR 1.3.6.1.4.1.8603.1.2.1.1.10.2.7
Do accounting per RAR(true) / BBU(false).
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

acntL2DownDebounce 1.3.6.1.4.1.8603.1.2.1.1.10.2.8
L2Down debounce time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acntUpdateBand 1.3.6.1.4.1.8603.1.2.1.1.10.2.9
Accounting update max bandwidth (bytes/sec).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

bbuTable 1.3.6.1.4.1.8603.1.2.1.2.4
Table of Base Band Units.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BbuEntry

bbuEntry 1.3.6.1.4.1.8603.1.2.1.2.4.1
Base Band Unit table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  BbuEntry  

bbuId 1.3.6.1.4.1.8603.1.2.1.2.4.1.1
Base Band Unit ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

bbuIpAddress 1.3.6.1.4.1.8603.1.2.1.2.4.1.2
BBU IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

bbuAdminState 1.3.6.1.4.1.8603.1.2.1.2.4.1.3
BBU administrative state.
Status: current Access: read-write
OBJECT-TYPE    
  AdminState  

bbuOperState 1.3.6.1.4.1.8603.1.2.1.2.4.1.4
A GET on this object will return the BBU's operational state. Valid values for a SET are: active(1) set BBU to active state disabledStandby(6) set BBU to disabled/standby state
Status: current Access: read-write
OBJECT-TYPE    
  BbuState  

bbuReset 1.3.6.1.4.1.8603.1.2.1.2.4.1.5
Set to true(1) to reset the BBU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

bbuHwVer 1.3.6.1.4.1.8603.1.2.1.2.4.1.6
BBU hardware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bbuBootromVer 1.3.6.1.4.1.8603.1.2.1.2.4.1.7
BBU bootrom version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rrMobileNum 1.3.6.1.4.1.8603.1.2.1.4.1
Total number of active mobile users on the base station. An active user is a mobile which has been authenticated and has acquired an IP address (L3 registered).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mobileTable 1.3.6.1.4.1.8603.1.2.1.4.3
Table of mobile users.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MobileEntry

mobileEntry 1.3.6.1.4.1.8603.1.2.1.4.3.1
Mobile user table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  MobileEntry  

mobileEui 1.3.6.1.4.1.8603.1.2.1.4.3.1.1
Mobile EUI64.
Status: current Access: read-only
OBJECT-TYPE    
  MobileEui  

mobileScrub 1.3.6.1.4.1.8603.1.2.1.4.3.1.2
Set this value to true(1) to scrub the mobile from the system.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

mobileSectorTable 1.3.6.1.4.1.8603.1.2.1.4.4
Table of mobile users as seen by a particular sector.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MobileSectorEntry

mobileSectorEntry 1.3.6.1.4.1.8603.1.2.1.4.4.1
Mobile user as seen by a particular sector table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  MobileSectorEntry  

mobileSectorEui 1.3.6.1.4.1.8603.1.2.1.4.4.1.1
Mobile EUI64.
Status: current Access: read-only
OBJECT-TYPE    
  MobileEui  

mobileSectorId 1.3.6.1.4.1.8603.1.2.1.4.4.1.2
The sector Id.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mobileSectorMipLifetime 1.3.6.1.4.1.8603.1.2.1.4.4.1.3
The Mobile IP lifetime.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mobileSectorNai 1.3.6.1.4.1.8603.1.2.1.4.4.1.4
The Network Access Identifier used to uniquely identify the mobile node. Typically the NAI is of the form user@realm.com.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mobileSectorL2State 1.3.6.1.4.1.8603.1.2.1.4.4.1.5
The L2 access control state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mobileSectorQosProfile 1.3.6.1.4.1.8603.1.2.1.4.4.1.6
The L2 access control QoS profile.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mobileSectorAaaIp 1.3.6.1.4.1.8603.1.2.1.4.4.1.7
The AAA assigned Home IP address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mobileSectorAaaHa 1.3.6.1.4.1.8603.1.2.1.4.4.1.8
The AAA assigned Home Agent IP address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mobileSectorActiveIp 1.3.6.1.4.1.8603.1.2.1.4.4.1.9
The Home Agent assigned Home IP address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mobileSectorActiveHa 1.3.6.1.4.1.8603.1.2.1.4.4.1.10
The MCU assigned Home Agent IP address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mobileSectorFramedMtuSize 1.3.6.1.4.1.8603.1.2.1.4.4.1.11
The MTU frame size.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mobileSectorMipAuthAlg 1.3.6.1.4.1.8603.1.2.1.4.4.1.12
The authentication algorithm
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mobileSectorNaiReg 1.3.6.1.4.1.8603.1.2.1.4.4.1.13
Does the mobile MIP register with NAI?
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mobileSectorIdleTimeout 1.3.6.1.4.1.8603.1.2.1.4.4.1.14
Layer 2/3 cipher key timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mobileSectorAcntInterval 1.3.6.1.4.1.8603.1.2.1.4.4.1.15
RADIUS accounting update interval (seconds).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mobileSectorVendorId 1.3.6.1.4.1.8603.1.2.1.4.4.1.16
Mobile vendor ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mobileSectorVersion 1.3.6.1.4.1.8603.1.2.1.4.4.1.17
The mobile version information.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mobileActiveTable 1.3.6.1.4.1.8603.1.2.1.4.5
This table displays the active mobiles connected on each sector.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MobileActiveEntry

mobileActiveEntry 1.3.6.1.4.1.8603.1.2.1.4.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  MobileActiveEntry  

mobileActiveSectorId 1.3.6.1.4.1.8603.1.2.1.4.5.1.1
Sector ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mobileActiveIndex 1.3.6.1.4.1.8603.1.2.1.4.5.1.2
Active mobile index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mobileActiveEui 1.3.6.1.4.1.8603.1.2.1.4.5.1.4
The mobile's EUI-64.
Status: current Access: read-only
OBJECT-TYPE    
  MobileEui  

mobileActiveIpAddr 1.3.6.1.4.1.8603.1.2.1.4.5.1.8
Mobile IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mobileActiveVersion 1.3.6.1.4.1.8603.1.2.1.4.5.1.9
Mobile version number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sectorNum 1.3.6.1.4.1.8603.1.2.1.10.1
Number of sectors. A value of 1 implies that the system is not-sectorized (omnidirectional).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sectorTable 1.3.6.1.4.1.8603.1.2.1.10.2
Table of sectors.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SectorEntry

sectorEntry 1.3.6.1.4.1.8603.1.2.1.10.2.1
Sector table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SectorEntry  

sectorId 1.3.6.1.4.1.8603.1.2.1.10.2.1.1
The sector identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sectorBbu 1.3.6.1.4.1.8603.1.2.1.10.2.1.2
The Base Band Unit handling this sector.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

wanBladeTable 1.3.6.1.4.1.8603.1.2.1.5.1
WAN blade table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WanBladeEntry

wanBladeEntry 1.3.6.1.4.1.8603.1.2.1.5.1.1
WAN blade table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  WanBladeEntry  

wanBladeId 1.3.6.1.4.1.8603.1.2.1.5.1.1.1
The WAN blade identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

wanBladeValid 1.3.6.1.4.1.8603.1.2.1.5.1.1.2
Indicates if this WAN blade is valid.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

wanPortTable 1.3.6.1.4.1.8603.1.2.1.5.2
WAN port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WanPortEntry

wanPortEntry 1.3.6.1.4.1.8603.1.2.1.5.2.1
WAN port table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  WanPortEntry  

wanPortBladeId 1.3.6.1.4.1.8603.1.2.1.5.2.1.1
The WAN blade identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

wanPortId 1.3.6.1.4.1.8603.1.2.1.5.2.1.2
The WAN port identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

wanTxBufferSize 1.3.6.1.4.1.8603.1.2.1.5.2.1.3
Size of each Tx buffer (bytes).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wanTxBuffers 1.3.6.1.4.1.8603.1.2.1.5.2.1.4
Number of trasmit buffers.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wanTxMaxPending 1.3.6.1.4.1.8603.1.2.1.5.2.1.5
Maximum pending Tx packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wanRxBufferSize 1.3.6.1.4.1.8603.1.2.1.5.2.1.6
Size of each Rx buffer (bytes).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wanRxBuffers 1.3.6.1.4.1.8603.1.2.1.5.2.1.7
Number of receive buffers.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wanMaxRxFrameSize 1.3.6.1.4.1.8603.1.2.1.5.2.1.8
Maximum size of Rx frame.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wanLoopback 1.3.6.1.4.1.8603.1.2.1.5.2.1.9
Loopback mode.
Status: current Access: read-write
OBJECT-TYPE    
  WanLoopbackMode  

wanCrcMode 1.3.6.1.4.1.8603.1.2.1.5.2.1.10
CRC mode.
Status: current Access: read-write
OBJECT-TYPE    
  WanCrcMode  

wanClocking 1.3.6.1.4.1.8603.1.2.1.5.2.1.11
DS-1 clocking.
Status: current Access: read-write
OBJECT-TYPE    
  WanClock  

wanDataRate 1.3.6.1.4.1.8603.1.2.1.5.2.1.12
DS-0 rate.
Status: current Access: read-write
OBJECT-TYPE    
  WanBitRate  

wanCoding 1.3.6.1.4.1.8603.1.2.1.5.2.1.13
DS-1 line coding.
Status: current Access: read-write
OBJECT-TYPE    
  WanLineCoding  

wanFraming 1.3.6.1.4.1.8603.1.2.1.5.2.1.14
DS-1 line mode.
Status: current Access: read-write
OBJECT-TYPE    
  WanLineMode  

wanRxGain 1.3.6.1.4.1.8603.1.2.1.5.2.1.15
DS-1 Rx equalizer gain.
Status: current Access: read-write
OBJECT-TYPE    
  WanLineGain  

wanLbo 1.3.6.1.4.1.8603.1.2.1.5.2.1.16
DS-1 line build out.
Status: current Access: read-write
OBJECT-TYPE    
  WanLineBuildOut  

wanPolarity 1.3.6.1.4.1.8603.1.2.1.5.2.1.17
DS-1 data polarity mode.
Status: current Access: read-write
OBJECT-TYPE    
  WanPolarity  

wanPulse 1.3.6.1.4.1.8603.1.2.1.5.2.1.18
DS-1 pulse density enforcer.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

wanJitter 1.3.6.1.4.1.8603.1.2.1.5.2.1.19
DS-1 jitter attenuator.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

wanJitterSide 1.3.6.1.4.1.8603.1.2.1.5.2.1.20
DS-1 jitter attenuator.
Status: current Access: read-write
OBJECT-TYPE    
  WanJitterAttenuation  

wanChan1to8 1.3.6.1.4.1.8603.1.2.1.5.2.1.21
DS-0's 1-8 enabled.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

wanChan9to16 1.3.6.1.4.1.8603.1.2.1.5.2.1.22
DS-0's 9-16 enabled.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

wanChan17to24 1.3.6.1.4.1.8603.1.2.1.5.2.1.23
DS-0's 17-24 enabled.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

wanChan25to32 1.3.6.1.4.1.8603.1.2.1.5.2.1.24
DS-0's 25-32 enabled.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

wanPortValid 1.3.6.1.4.1.8603.1.2.1.5.2.1.25
Indicates if this port is valid.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

mlppp 1.3.6.1.4.1.8603.1.2.1.5.3
OBJECT IDENTIFIER    

mlpppReconfigure 23.1
Set to true to reconfigure MLPPP.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

bundleTable 23.2
MLPPP bundle table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BundleEntry

bundleEntry 23.2.1
MLPPP bundle table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  BundleEntry  

bundleId 23.2.1.1
The MLPPP bundle identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

bundleValid 23.2.1.2
Indicates if this MLPPP bundle is valid.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  


bundleCompression 23.2.1.4
Indicates if multilink is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

bundleInterface 23.2.1.5
Netgraph interface name. Valid values are 'ppp0' or 'ppp1'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

bundleLinkChap 23.2.1.6
Indicates if CHAP Authentication is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

bundleLinkPap 23.2.1.7
Indicates if PAP Authentication is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

bundleLinkMru 23.2.1.8
PPP maximum receive unit (int bytes).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bundleLinkMtu 23.2.1.9
PPP maximum trasmit unit (int bytes).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bundleLinkKeepAliveIntvl 23.2.1.10
PPP LCP keep-alive interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bundleLinkKeepAliveDur 23.2.1.11
PPP LCP keep-alive duration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bundleLinkAcfComp 23.2.1.12
PPP Address/Control Field compression.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

bundleLinkProtoComp 23.2.1.13
PPP Protocol Field compression.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

bundleIfaceOnDemand 23.2.1.14
On demand dialing.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

bundleIfaceIdleTimeout 23.2.1.15
PPP idle timeout (0 means disabled).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bundleIpcpVjComp 23.2.1.16
TCP VJ compression.
Status: current Access: read-write
OBJECT-TYPE    
  WanFeatureState  

bundleIpcpDns 23.2.1.17
Domain Name Server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

bundleIpcpNbns 23.2.1.18
Netbios Name Server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

bundleIpcpLocalIpAddr 23.2.1.19
Local MLPPP IP address. The format of this object is '/'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

bundleIpcpPeerIpAddr 23.2.1.20
Peer MLPPP IP address. The format of this object is '/'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

bundleRouteHandling 23.2.1.21
MLPPP handling of supernetting of MLPPP interfaces.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RouteHandling  

wanlinksTable 23.3
WAN links table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WanlinksEntry

wanlinksEntry 23.3.1
WAN links table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  WanlinksEntry  

wanlinksBundleId 23.3.1.1
The WAN links bundle identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

wanlinksId 23.3.1.2
The WAN link identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

wanlinksInBundle 23.3.1.3
Indicates if wanlinks are in the bundle.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ifaceRouteTable 23.4
Bundle interface routing table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfaceRouteEntry

ifaceRouteEntry 23.4.1
Bundle interface route entry.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  IfaceRouteEntry  

ifaceRtBundleId 23.4.1.1
The bundle identifier.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

ifaceRouteId 23.4.1.2
The bundle interface route identifier.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

ifaceRoute 23.4.1.3
The interface route. The format of this object is '/'.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString  

bhQosReconfigure 1.3.6.1.4.1.8603.1.2.1.1.20.1
Set to true(1) to reconfigure.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

bhQosAqmParams 1.3.6.1.4.1.8603.1.2.1.1.20.2
Active Queue Management parameters.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

bhQosGroupTable 1.3.6.1.4.1.8603.1.2.1.1.20.3
This table is used to configure QoS groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BhQosGroupEntry

bhQosGroupEntry 1.3.6.1.4.1.8603.1.2.1.1.20.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  BhQosGroupEntry  

bhQosGroupIndex 1.3.6.1.4.1.8603.1.2.1.1.20.3.1.1
The table index value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bhQosGroupName 1.3.6.1.4.1.8603.1.2.1.1.20.3.1.2
A get on this object returns the group name. A new group can be added by first setting bhQosGroupStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting bhQosGroupStatus to active(1).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

bhQosGroupStatus 1.3.6.1.4.1.8603.1.2.1.1.20.3.1.3
This object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

bhQosGroupClassTable 1.3.6.1.4.1.8603.1.2.1.1.20.4
This table is used to configure QoS group classes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BhQosGroupClassEntry

bhQosGroupClassEntry 1.3.6.1.4.1.8603.1.2.1.1.20.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  BhQosGroupClassEntry  

bhQosGroupIndex1 1.3.6.1.4.1.8603.1.2.1.1.20.4.1.1
The group index associated with this class entry. This index can be used to look up the group name in the bhQosGroupTable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bhQosGroupClassIndex 1.3.6.1.4.1.8603.1.2.1.1.20.4.1.2
An index value for this class entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bhQosGroupClassName 1.3.6.1.4.1.8603.1.2.1.1.20.4.1.3
A get on this object returns the group name. A new group can be added by first setting bhQosGroupClassStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting bhQosGroupClassStatus to active(1).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

bhQosGroupClassStatus 1.3.6.1.4.1.8603.1.2.1.1.20.4.1.4
This object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

bhQosGroupFilterTable 1.3.6.1.4.1.8603.1.2.1.1.20.5
This table is used to configure QoS group filters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BhQosGroupFilterEntry

bhQosGroupFilterEntry 1.3.6.1.4.1.8603.1.2.1.1.20.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  BhQosGroupFilterEntry  

bhQosGroupIndex2 1.3.6.1.4.1.8603.1.2.1.1.20.5.1.1
The group index associated with this filter entry. This index can be used to look up the group name in the bhQosGroupTable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bhQosGroupFilterIndex 1.3.6.1.4.1.8603.1.2.1.1.20.5.1.2
An index value for this filter entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bhQosGroupFilterName 1.3.6.1.4.1.8603.1.2.1.1.20.5.1.3
A get on this object returns the group name. A new group can be added by first setting bhQosGroupFilterStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting bhQosGroupFilterStatus to active(1).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

bhQosGroupFilterStatus 1.3.6.1.4.1.8603.1.2.1.1.20.5.1.4
This object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

bhQosGroupMarkerTable 1.3.6.1.4.1.8603.1.2.1.1.20.6
This table is used to configure QoS group markers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BhQosGroupMarkerEntry

bhQosGroupMarkerEntry 1.3.6.1.4.1.8603.1.2.1.1.20.6.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  BhQosGroupMarkerEntry  

bhQosGroupIndex3 1.3.6.1.4.1.8603.1.2.1.1.20.6.1.1
The group index associated with this marker entry. This index can be used to look up the group name in the bhQosGroupTable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bhQosGroupMarkerIndex 1.3.6.1.4.1.8603.1.2.1.1.20.6.1.2
An index value for this marker entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

bhQosGroupMarkerName 1.3.6.1.4.1.8603.1.2.1.1.20.6.1.3
A get on this object returns the group name. A new group can be added by first setting bhQosGroupMarkerStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting bhQosGroupMarkerStatus to active(1).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

bhQosGroupMarkerStatus 1.3.6.1.4.1.8603.1.2.1.1.20.6.1.4
This object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

relConfig 1.3.6.1.4.1.8603.1.2.1.1.12.1
OBJECT IDENTIFIER    

relStatus 1.3.6.1.4.1.8603.1.2.1.1.12.2
OBJECT IDENTIFIER    

relAction 1.3.6.1.4.1.8603.1.2.1.1.12.3
OBJECT IDENTIFIER    

relServerIpAddr 1.3.6.1.4.1.8603.1.2.1.1.12.1.1
The IP address of the FTP server containing the release.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

relPkgPath 1.3.6.1.4.1.8603.1.2.1.1.12.1.2
The absolute path to the package file on the FTP server specified by relServerIpAddr.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString  

relOsPath 1.3.6.1.4.1.8603.1.2.1.1.12.1.3
The absolute path to the OS distribution directory on the FTP server specified by relServerIpAddr.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString  

relApplyToStandby 1.3.6.1.4.1.8603.1.2.1.1.12.1.4
Set this object to 'true' to upgrade the standby partition. This object is only relevant when upgrading packages.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

relBootPartition 1.3.6.1.4.1.8603.1.2.1.1.12.1.5
The partition to boot after next system reboot.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..2  

relPkgRunVer 1.3.6.1.4.1.8603.1.2.1.1.12.1.6
This object sets the package version to run. Setting this object causes the system to automatically restart or reboot and run the specified package. A reboot will be performed if the relBootPartition object is different than the current active partition, specified by activePartition.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString  

relOsUpgradeType 1.3.6.1.4.1.8603.1.2.1.1.12.1.7
OS upgrade type.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OsUpgradeType  

relUpgradeStatus 1.3.6.1.4.1.8603.1.2.1.1.12.2.1
The current download status.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DownloadState  

relPctComplete 1.3.6.1.4.1.8603.1.2.1.1.12.2.2
Download progress expressed as percentage complete.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

relErrorReason 1.3.6.1.4.1.8603.1.2.1.1.12.2.3
If relUpgradeStatus reports failure, this object will contain the reason for the failure.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

activePartition 1.3.6.1.4.1.8603.1.2.1.1.12.2.4
The disk slice number of the active partition.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

activeOsVer 1.3.6.1.4.1.8603.1.2.1.1.12.2.5
The active partition OS version.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

standbyOsVer 1.3.6.1.4.1.8603.1.2.1.1.12.2.6
The standby partition OS version.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

activePkgTable 1.3.6.1.4.1.8603.1.2.1.1.12.2.7
Active partition package table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ActivePkgTableEntry

activePkgTableEntry 1.3.6.1.4.1.8603.1.2.1.1.12.2.7.1
Tok_String
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  ActivePkgTableEntry  

activePkgIndex 1.3.6.1.4.1.8603.1.2.1.1.12.2.7.1.1
The table index value.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

activePkgName 1.3.6.1.4.1.8603.1.2.1.1.12.2.7.1.2
The package name.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

standbyPkgTable 1.3.6.1.4.1.8603.1.2.1.1.12.2.8
Standby partition package table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StandbyPkgTableEntry

standbyPkgTableEntry 1.3.6.1.4.1.8603.1.2.1.1.12.2.8.1
Tok_String
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  StandbyPkgTableEntry  

standbyPkgIndex 1.3.6.1.4.1.8603.1.2.1.1.12.2.8.1.1
The table index value.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

standbyPkgName 1.3.6.1.4.1.8603.1.2.1.1.12.2.8.1.2
The package name.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

currentRunVer 1.3.6.1.4.1.8603.1.2.1.1.12.2.9
Current running version.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

relMediaType 1.3.6.1.4.1.8603.1.2.1.1.12.2.10
Media type.
Status: deprecated Access: read-only
OBJECT-TYPE    
  MediaType  

relDoPkgUpgrade 1.3.6.1.4.1.8603.1.2.1.1.12.3.1
Set to 'true' to begin package upgrade. If relConfig.relApplyToStandby object is set to 'true', the standby partition will be upgraded.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

relDoOsUpgrade 1.3.6.1.4.1.8603.1.2.1.1.12.3.2
Set to 'true' to begin OS upgrade.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

relDeletePkg 1.3.6.1.4.1.8603.1.2.1.1.12.3.3
This object takes a package name as its value. Setting this object will delete the package. If the relConfig.relApplyToStandby object is set to 'true', the package will be deleted from the standby partition.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DisplayString  

relSysAction 1.3.6.1.4.1.8603.1.2.1.1.12.3.4
When this object is set to restart(1), the basestation software software is restarted. If reboot(2) is specified, the MCU is rebooted.
Status: deprecated Access: read-write
OBJECT-TYPE    
  SysAction  

dnsReconfigure 1.3.6.1.4.1.8603.1.2.1.1.13.1
Set to true to reconfigure DNS.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dnsNameServerTable 1.3.6.1.4.1.8603.1.2.1.1.13.2
DNS name server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DnsNameServerEntry

dnsNameServerEntry 1.3.6.1.4.1.8603.1.2.1.1.13.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DnsNameServerEntry  

dnsNameServerIndex 1.3.6.1.4.1.8603.1.2.1.1.13.2.1.1
The table index value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dnsNameServerAddr 1.3.6.1.4.1.8603.1.2.1.1.13.2.1.2
The IP address of DNS name server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dnsSearchTable 1.3.6.1.4.1.8603.1.2.1.1.13.3
DNS domain search table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DnsSearchEntry

dnsSearchEntry 1.3.6.1.4.1.8603.1.2.1.1.13.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DnsSearchEntry  

dnsSearchIndex 1.3.6.1.4.1.8603.1.2.1.1.13.3.1.1
The table index value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dnsSearchDomain 1.3.6.1.4.1.8603.1.2.1.1.13.3.1.2
The domain name suffix.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

routeProvTable 1.3.6.1.4.1.8603.1.2.1.1.14.1
This table is used to configure the routing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RouteProvEntry

routeProvEntry 1.3.6.1.4.1.8603.1.2.1.1.14.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RouteProvEntry  

routeProvIndex 1.3.6.1.4.1.8603.1.2.1.1.14.1.1.1
The table index value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

routeProvName 1.3.6.1.4.1.8603.1.2.1.1.14.1.1.2
A get on this object returns the route name. A new route can be added by first setting routeProvStatus to createAndWait(5) to create the conceptual row. Then set this object with the route value. Finally, commit the value by setting routeProvStatus to active(1).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

routeProvStatus 1.3.6.1.4.1.8603.1.2.1.1.14.1.1.3
This object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

routeRuntimeTable 1.3.6.1.4.1.8603.1.2.1.1.14.2
This table displays the routes available in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RouteRuntimeEntry

routeRuntimeEntry 1.3.6.1.4.1.8603.1.2.1.1.14.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RouteRuntimeEntry  

routeRuntimeIndex 1.3.6.1.4.1.8603.1.2.1.1.14.2.1.1
The table index value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

routeRuntimeName 1.3.6.1.4.1.8603.1.2.1.1.14.2.1.2
The route information.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

routeProtocol 1.3.6.1.4.1.8603.1.2.1.1.14.3
The route protocol.
Status: current Access: read-write
OBJECT-TYPE    
  RouteProtocol  

routeTosVal 1.3.6.1.4.1.8603.1.2.1.1.14.4
The route Type Of Service.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

routeDscp 1.3.6.1.4.1.8603.1.2.1.1.14.5
The route Diffserv codepoint.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

userGroupTable 1.3.6.1.4.1.8603.1.2.1.1.15.1
This table contains a set of user groups used for QoS (Quality of Service).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserGroupEntry

userGroupEntry 1.3.6.1.4.1.8603.1.2.1.1.15.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  UserGroupEntry  

userGroupIndex 1.3.6.1.4.1.8603.1.2.1.1.15.1.1.1
User group index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

userGroupName 1.3.6.1.4.1.8603.1.2.1.1.15.1.1.2
A get on this object returns the user group name. A new group can be added by first setting userGroupStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting userGroupStatus to active(1).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

userGroupStatus 1.3.6.1.4.1.8603.1.2.1.1.15.1.1.3
This object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

userGroupUlRateCap 1.3.6.1.4.1.8603.1.2.1.1.15.1.1.4
User group uplink rate cap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

userGroupDlRateCap 1.3.6.1.4.1.8603.1.2.1.1.15.1.1.5
User group downlink rate cap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

groupRulesTable 1.3.6.1.4.1.8603.1.2.1.1.15.2
This table contains a set of QoS rules for each user group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GroupRulesEntry

groupRulesEntry 1.3.6.1.4.1.8603.1.2.1.1.15.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  GroupRulesEntry  

groupIndex 1.3.6.1.4.1.8603.1.2.1.1.15.2.1.1
This object specifies the user group being queried. It is equal to the userGroupIndex in the userGroupTable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

groupRuleIndex 1.3.6.1.4.1.8603.1.2.1.1.15.2.1.2
This object is an index to a rule for a particular user group, specified by groupIndex.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

groupRuleName 1.3.6.1.4.1.8603.1.2.1.1.15.2.1.3
A get on this object returns the user group rule. A new rule can be added by first setting groupRuleStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting groupRuleStatus to active(1).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

groupRuleStatus 1.3.6.1.4.1.8603.1.2.1.1.15.2.1.4
This object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

groupStreamsTable 1.3.6.1.4.1.8603.1.2.1.1.15.3
This table contains stream configuration for each user groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GroupStreamsEntry

groupStreamsEntry 1.3.6.1.4.1.8603.1.2.1.1.15.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  GroupStreamsEntry  

groupIndex1 1.3.6.1.4.1.8603.1.2.1.1.15.3.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

groupStreamIndex 1.3.6.1.4.1.8603.1.2.1.1.15.3.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

groupStreamUlRateCap 1.3.6.1.4.1.8603.1.2.1.1.15.3.1.3
Uplink rate cap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

groupStreamDlRateCap 1.3.6.1.4.1.8603.1.2.1.1.15.3.1.4
Downlink rate cap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

groupStreamUlTokenGain 1.3.6.1.4.1.8603.1.2.1.1.15.3.1.5
Uplink token gain.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

groupStreamDlTokenGain 1.3.6.1.4.1.8603.1.2.1.1.15.3.1.6
Downlink token gain.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

trapTable 1.3.6.1.4.1.8603.1.1.4.1
Trap destinations table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapTableEntry

trapTableEntry 1.3.6.1.4.1.8603.1.1.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TrapTableEntry  

trapIndex 1.3.6.1.4.1.8603.1.1.4.1.1.1
The table index value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

trapEnable 1.3.6.1.4.1.8603.1.1.4.1.1.2
Set to true(1) to send traps to this destination.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

trapCommunity 1.3.6.1.4.1.8603.1.1.4.1.1.3
The trap community string for this destination.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

trapAddr 1.3.6.1.4.1.8603.1.1.4.1.1.4
The IP address of this trap destination.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

trapPort 1.3.6.1.4.1.8603.1.1.4.1.1.5
The trap destination port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

trapSendCritical 1.3.6.1.4.1.8603.1.1.4.1.1.6
Send critical severity traps to this destination.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

trapSendMajor 1.3.6.1.4.1.8603.1.1.4.1.1.7
Send major severity traps to this destination.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

trapSendMinor 1.3.6.1.4.1.8603.1.1.4.1.1.8
Send minor severity traps to this destination.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

trapSendWarning 1.3.6.1.4.1.8603.1.1.4.1.1.9
Send warning severity traps to this destination.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

trapSendCleared 1.3.6.1.4.1.8603.1.1.4.1.1.10
Send cleared severity traps to this destination.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

trapHistSize 1.3.6.1.4.1.8603.1.1.5.1
Maximum number of entries to store in SNMP trap history table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

trapHistTable 1.3.6.1.4.1.8603.1.1.5.2
This is the SNMP trap history table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapHistEntry

trapHistEntry 1.3.6.1.4.1.8603.1.1.5.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TrapHistEntry  

trapHistIndex 1.3.6.1.4.1.8603.1.1.5.2.1.1
The trap history index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

trapHistOid 1.3.6.1.4.1.8603.1.1.5.2.1.2
The SNMP trap OID.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

trapHistMoType 1.3.6.1.4.1.8603.1.1.5.2.1.3
The managed object which generated this trap.
Status: current Access: read-only
OBJECT-TYPE    
  MoType  

trapHistMoId 1.3.6.1.4.1.8603.1.1.5.2.1.4
The managed object instance identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

trapHistTime 1.3.6.1.4.1.8603.1.1.5.2.1.5
The value of MIB II's sysUpTime object when the trap was generated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

trapHistInfo 1.3.6.1.4.1.8603.1.1.5.2.1.6
Additional information related to this trap.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapHistTimestamp 1.3.6.1.4.1.8603.1.1.5.2.1.7
The time at which the trap was generated. This value is expressed in seconds since 00:00:00 UTC, January 1, 1970 (see time(2)).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

trapHistSeqNum 1.3.6.1.4.1.8603.1.1.5.2.1.8
The trap's sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rrTrapProv 1.3.6.1.4.1.8603.1.1.6
OBJECT IDENTIFIER    

trapProvTable 1.3.6.1.4.1.8603.1.1.6.1
This is the SNMP trap provisioning table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapProvEntry

trapProvEntry 1.3.6.1.4.1.8603.1.1.6.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TrapProvEntry  

trapProvIndex 1.3.6.1.4.1.8603.1.1.6.1.1.1
A unique identifier for each row in the table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

trapProvName 1.3.6.1.4.1.8603.1.1.6.1.1.2
The name of the SNMP trap.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapProvEnable 1.3.6.1.4.1.8603.1.1.6.1.1.3
Indicates whether the SNMP trap is enabled or disabled. Set to true(1) to enable the trap, false(2) to disable the trap.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ctCoreProv 1.3.6.1.4.1.8603.1.2.1.1.16.1
OBJECT IDENTIFIER    

ctServerTable 1.3.6.1.4.1.8603.1.2.1.1.16.1.1
Table of Context Transfer Core servers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CtServerEntry

ctServerEntry 1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1
CT Core server table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CtServerEntry  

ctServerIndex 1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.1
Context Transfer server index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ctServerValid 1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.2
Indicates if this CT server entry is valid.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ctServerName 1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.3
CT server name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ctServerAddr 1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.4
CT server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ctServerPort 1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.5
CT server port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

ctServerSecret 1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.6
CT server secret key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ctServerTimeout 1.3.6.1.4.1.8603.1.2.1.1.16.1.2
CT server timeout.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 100..1800  

ctServerRetry 1.3.6.1.4.1.8603.1.2.1.1.16.1.3
CT server maximum retry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

l2AcProv 1.3.6.1.4.1.8603.1.2.1.1.17.1
OBJECT IDENTIFIER    

l2AcPagingCycle 1.3.6.1.4.1.8603.1.2.1.1.17.1.1
This object indicates how often, in superslots, a sleeping mobile checks for incoming pages. The only valid value is 200 cycles or 0 (mobile does not check for pages).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

l2AcStats 1.3.6.1.4.1.8603.1.2.1.1.17.2
OBJECT IDENTIFIER    

l2AcRegistrationReq 1.3.6.1.4.1.8603.1.2.1.1.17.2.1
Layer 2 registration requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcRegistrationReqFail 1.3.6.1.4.1.8603.1.2.1.1.17.2.2
Layer 2 registration request failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcHandoffReq 1.3.6.1.4.1.8603.1.2.1.1.17.2.3
Layer 2 handoff requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcHandoffReqFailures 1.3.6.1.4.1.8603.1.2.1.1.17.2.4
Layer 2 handoff request failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcAaaAuthRequestsSent 1.3.6.1.4.1.8603.1.2.1.1.17.2.14
AAA Access-Request messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcAaaAuthChallengesRecvd 1.3.6.1.4.1.8603.1.2.1.1.17.2.15
AAA Access-Challenge messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcAaaAuthRejectsRecvd 1.3.6.1.4.1.8603.1.2.1.1.17.2.16
AAA Access-Reject messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcAaaAuthAcceptsRecvd 1.3.6.1.4.1.8603.1.2.1.1.17.2.17
AAA Access-Accept messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcAaaAuthNetworkTimeouts 1.3.6.1.4.1.8603.1.2.1.1.17.2.18
AAA network timeout events.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcMobChallengeTimeouts 1.3.6.1.4.1.8603.1.2.1.1.17.2.22
Mobiles timeouts when challenged.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcUnilateralKeyTimeouts 1.3.6.1.4.1.8603.1.2.1.1.17.2.23
Layer 2 unilateral key timeouts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcUnilateralKeyReq 1.3.6.1.4.1.8603.1.2.1.1.17.2.24
Layer 2 unilateral key requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcUnilateralKeyResp 1.3.6.1.4.1.8603.1.2.1.1.17.2.25
Layer 2 unilateral key responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcRelayMsgRecvd 1.3.6.1.4.1.8603.1.2.1.1.17.2.28
Relay from mobile messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcSmallestL2RegIntvl 1.3.6.1.4.1.8603.1.2.1.1.17.2.29
Smaller L2 Registration interval, in msec.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcLargestL2RegIntvl 1.3.6.1.4.1.8603.1.2.1.1.17.2.30
Largest L2 Registration interval, in msec.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcAverageL2RegIntvl 1.3.6.1.4.1.8603.1.2.1.1.17.2.31
Average L2 Registration interval, in msec.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtMsgRecvdFail 1.3.6.1.4.1.8603.1.2.1.1.17.2.33
Core-CT messages received failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtMsgRecvd 1.3.6.1.4.1.8603.1.2.1.1.17.2.34
Core-CT messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcBadCoreCtMsgRecvd 1.3.6.1.4.1.8603.1.2.1.1.17.2.35
Bad Core-CT messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtAckRecvd 1.3.6.1.4.1.8603.1.2.1.1.17.2.36
Core-CT ACK messages received.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtAnswerRecvd 1.3.6.1.4.1.8603.1.2.1.1.17.2.37
Core-CT Answer received.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtCreates 1.3.6.1.4.1.8603.1.2.1.1.17.2.38
Core-CT context transfer creates.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtCreateFailures 1.3.6.1.4.1.8603.1.2.1.1.17.2.39
Core-CT context transfer create failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtUpdates 1.3.6.1.4.1.8603.1.2.1.1.17.2.40
Core-CT context transfer updates.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtUpdateFailures 1.3.6.1.4.1.8603.1.2.1.1.17.2.41
Core-CT context transfer update failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtDeletes 1.3.6.1.4.1.8603.1.2.1.1.17.2.42
Core-CT context transfer deletes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtDeleteFailures 1.3.6.1.4.1.8603.1.2.1.1.17.2.43
Core-CT context transfer delete failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtRequest 1.3.6.1.4.1.8603.1.2.1.1.17.2.44
Core-CT context transfer requests.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtRequestFailures 1.3.6.1.4.1.8603.1.2.1.1.17.2.45
Core-CT context transfer request failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtRequestSuccesses 1.3.6.1.4.1.8603.1.2.1.1.17.2.46
Core-CT context transfer request successes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtCreateSuccesses 1.3.6.1.4.1.8603.1.2.1.1.17.2.47
Core-CT context transfer Create Successes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtUpdateSuccesses 1.3.6.1.4.1.8603.1.2.1.1.17.2.48
Core-CT context transfer Update Successes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtDeleteSuccesses 1.3.6.1.4.1.8603.1.2.1.1.17.2.49
Core-CT context transfer Delete Successes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtContextTransferGetResponses 1.3.6.1.4.1.8603.1.2.1.1.17.2.50
Core-CT context transfer Get Responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtContextTransferCreateResponses 1.3.6.1.4.1.8603.1.2.1.1.17.2.51
Core-CT context transfer Create Responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtContextTransferUpdateResponses 1.3.6.1.4.1.8603.1.2.1.1.17.2.52
Core-CT context transfer Update Responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtContextTransferDeleteResponses 1.3.6.1.4.1.8603.1.2.1.1.17.2.53
Core-CT context transfer Delete Responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

l2AcCoreCtReceivedStaleMobile 1.3.6.1.4.1.8603.1.2.1.1.17.2.54
Core-CT Messages received for a Mobile which has already left the system.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

upgradeCurrRelease 1.3.6.1.4.1.8603.1.2.1.1.18.1
Current running release version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

upgradeReleaseTable 1.3.6.1.4.1.8603.1.2.1.1.18.2
A table showing the releases that are installed.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UpgradeReleaseEntry

upgradeReleaseEntry 1.3.6.1.4.1.8603.1.2.1.1.18.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  UpgradeReleaseEntry  

releaseIndex 1.3.6.1.4.1.8603.1.2.1.1.18.2.1.1
The table index value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

releaseVersion 1.3.6.1.4.1.8603.1.2.1.1.18.2.1.2
The package name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

upgradeServerAddr 1.3.6.1.4.1.8603.1.2.1.1.18.3
The IP address of the FTP server containing the release.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

upgradeReleasePath 1.3.6.1.4.1.8603.1.2.1.1.18.4
The absolute path to the release image file on the FTP server specified by upgradeServerAddr.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

upgradeAddRelease 1.3.6.1.4.1.8603.1.2.1.1.18.5
Set to 'true' to begin release upgrade. This object always returns 'false'.
Status: current Access: write-only
OBJECT-TYPE    
  TruthValue  

upgradeActivateRelease 1.3.6.1.4.1.8603.1.2.1.1.18.6
This object takes a release version as its value. Setting this object will cause the system to reboot and activate the specified release. This object always returns a zero-length string.
Status: current Access: write-only
OBJECT-TYPE    
  DisplayString  

upgradeRemoveRelease 1.3.6.1.4.1.8603.1.2.1.1.18.7
This object takes a release version as its value. Setting this object will delete the specified release. The current running release cannot be removed. This object always returns a zero-length string.
Status: current Access: write-only
OBJECT-TYPE    
  DisplayString  

upgradeStatus 1.3.6.1.4.1.8603.1.2.1.1.18.8
The current download status.
Status: current Access: read-only
OBJECT-TYPE    
  DownloadState  

upgradePctComplete 1.3.6.1.4.1.8603.1.2.1.1.18.9
Download progress expressed as percentage complete.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

upgradeErrorReason 1.3.6.1.4.1.8603.1.2.1.1.18.10
If upgradeStatus reports failure, this object will contain the reason for the failure.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

igmpState 1.3.6.1.4.1.8603.1.2.1.1.19.1
Set this value to turn the IGMP proxy on or off.
Status: current Access: read-write
OBJECT-TYPE    
  OnOffState  

igmpUseBroadcast 1.3.6.1.4.1.8603.1.2.1.1.19.2
Set this to true(1) to use broadcast at the PHY layer for multicast.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

igmpUpstreamIntf 1.3.6.1.4.1.8603.1.2.1.1.19.3
Upstream interface for IGMP proxy.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

igmpQueryInterval 1.3.6.1.4.1.8603.1.2.1.1.19.4
IGMP general query interval (in seconds).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

igmpMaxQueryResp 1.3.6.1.4.1.8603.1.2.1.1.19.5
Group timeout (in multiples of igmpQueryInterval).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

igmpMaxMembers 1.3.6.1.4.1.8603.1.2.1.1.19.6
Maximum number of wireless terminals joined to any IGMP group.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

igmpProxyStatus 1.3.6.1.4.1.8603.1.2.1.1.19.7
IGMP proxy current status.
Status: current Access: read-only
OBJECT-TYPE    
  OnOffState  

alarmTable 1.3.6.1.4.1.8603.1.2.10.1
This is a table of active alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlarmEntry

alarmEntry 1.3.6.1.4.1.8603.1.2.10.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AlarmEntry  

alarmIndex 1.3.6.1.4.1.8603.1.2.10.1.1.1
The alarm index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

alarmName 1.3.6.1.4.1.8603.1.2.10.1.1.2
A brief description of the alarm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

alarmSeverity 1.3.6.1.4.1.8603.1.2.10.1.1.3
The alarm severity level.
Status: current Access: read-only
OBJECT-TYPE    
  AlarmSeverity  

alarmMoType 1.3.6.1.4.1.8603.1.2.10.1.1.4
The managed object associated which generated this alarm.
Status: current Access: read-only
OBJECT-TYPE    
  MoType  

alarmMoId 1.3.6.1.4.1.8603.1.2.10.1.1.5
The managed object instance identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

alarmSector 1.3.6.1.4.1.8603.1.2.10.1.1.6
The sector which generated the alarm, if applicable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

alarmTime 1.3.6.1.4.1.8603.1.2.10.1.1.7
The time at which the alarm was generated. This value is expressed in seconds since 00:00:00 UTC, January 1, 1970 (see time(2)).
Status: deprecated Access: read-only
OBJECT-TYPE    
  TimeTicks  

alarmTimestamp 1.3.6.1.4.1.8603.1.2.10.1.1.8
The time at which the alarm was generated. This value is expressed in seconds since 00:00:00 UTC, January 1, 1970 (see time(2)).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER