FE-FIREEYE-MIB

File: FE-FIREEYE-MIB.mib (88680 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
INET-ADDRESS-MIB HCNUM-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
enterprises Integer32 Unsigned32
Counter32 Counter64 IpAddress
Gauge32 TruthValue MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP InetAddressType
InetAddress CounterBasedGauge64

Defined Types

EventEntry  
SEQUENCE    
  eventIndex Unsigned32
  eventId Unsigned32
  eventType OCTET STRING
  eventDate OCTET STRING
  eventTime OCTET STRING
  eventTraceId Counter64
  eventSrcIp IpAddress
  eventDstIp IpAddress
  eventSrcMac OCTET STRING
  eventDstMac OCTET STRING
  eventDstPort Integer32
  eventVlan Integer32
  eventProtocol OCTET STRING
  eventProfileId Unsigned32
  eventOsInfo OCTET STRING
  eventService OCTET STRING
  eventAttackType OCTET STRING
  eventSignatureName OCTET STRING
  eventSignatureType OCTET STRING
  eventSrcHost OCTET STRING
  eventCncNo Unsigned32
  alertSignatureId Unsigned32
  alertCncHost OCTET STRING
  alertCncPort Integer32
  alertChecksum OCTET STRING
  alertAnalysisType OCTET STRING
  alertProfile OCTET STRING
  alertAction OCTET STRING
  alertInterface OCTET STRING
  alertSensorIp IpAddress
  alertSensorHost OCTET STRING
  alertSensorProduct OCTET STRING
  alertSensorRelease OCTET STRING
  alertUrl OCTET STRING
  eventSrcAddrType InetAddressType
  eventSrcAddr InetAddress
  eventDstAddrType InetAddressType
  eventDstAddr InetAddress
  eventSensorAddrType InetAddressType
  eventSensorAddr InetAddress
  eventSrcPort Integer32
  eventDateTime OCTET STRING
  ipsSignatureId Unsigned32
  ipsSignatureRevision Unsigned32
  ipsMatchCount Gauge32
  ipsSeverity OCTET STRING
  ipsSignatureName OCTET STRING
  ipsReferenceId OCTET STRING
  ipsBlockMode OCTET STRING
  ipsAttackTarget OCTET STRING

FePhysicalDiskEntry  
SEQUENCE    
  fePhysicalDiskIndex Unsigned32
  fePhysicalDiskName OCTET STRING
  fePhysicalDiskStatus OCTET STRING
  fePhysicalDiskIsHealthy TruthValue
  fePhysicalDiskDeviceSupport OCTET STRING
  fePhysicalDiskSelfAssess OCTET STRING
  fePhysicalDiskTotalBytes OCTET STRING

FePowerSupplyEntry  
SEQUENCE    
  fePowerSupplyIndex Unsigned32
  fePowerSupplyStatus OCTET STRING
  fePowerSupplyIsHealthy TruthValue

FeFanStatusEntry  
SEQUENCE    
  feFanIndex Unsigned32
  feFanStatus OCTET STRING
  feFanIsHealthy TruthValue
  feFanSpeed Unsigned32

FeGIVersionEntry  
SEQUENCE    
  feGIIndex Unsigned32
  feGIName OCTET STRING
  feGIVersion OCTET STRING
  feGIEnabled TruthValue
  feGIInstallDateTime OCTET STRING

FeCMSApplianceEntry  
SEQUENCE    
  feCMSApplianceIndex Unsigned32
  feCMSApplianceName OCTET STRING
  feCMSApplianceDiskSpacePassed TruthValue
  feCMSApplianceFanPassed TruthValue
  feCMSAppliancePowerSupplyPassed TruthValue
  feCMSApplianceRaidPassed TruthValue
  feCMSApplianceTemperaturePassed TruthValue

Defined Values

fireeyeMibModule 1.3.6.1.4.1.25597.20.1
FireEye Inc Vendor MIB
MODULE-IDENTITY    

fireeye 1.3.6.1.4.1.25597
OBJECT IDENTIFIER    

variables 1.3.6.1.4.1.25597.1
OBJECT IDENTIFIER    

notifications 1.3.6.1.4.1.25597.3
OBJECT IDENTIFIER    

lms 1.3.6.1.4.1.25597.1.1
OBJECT IDENTIFIER    

lmsVersion 1.3.6.1.4.1.25597.1.1.1
System software version string
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventTable 1.3.6.1.4.1.25597.1.1.2
List of events
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EventEntry

eventCount 1.3.6.1.4.1.25597.1.1.3
Number of events
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

eventEntry 1.3.6.1.4.1.25597.1.1.2.1
Entry for one event
Status: current Access: not-accessible
OBJECT-TYPE    
  EventEntry  

eventIndex 1.3.6.1.4.1.25597.1.1.2.1.1
Synthetic numeric unique ID of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

eventId 1.3.6.1.4.1.25597.1.1.2.1.2
Id of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

eventType 1.3.6.1.4.1.25597.1.1.2.1.3
Type of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventDate 1.3.6.1.4.1.25597.1.1.2.1.4
Date of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventTime 1.3.6.1.4.1.25597.1.1.2.1.5
Time of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventTraceId 1.3.6.1.4.1.25597.1.1.2.1.6
Trace ID of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Counter64  

eventSrcIp 1.3.6.1.4.1.25597.1.1.2.1.7
Source IP address of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

eventDstIp 1.3.6.1.4.1.25597.1.1.2.1.8
Destination IP address of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

eventSrcMac 1.3.6.1.4.1.25597.1.1.2.1.9
Source MAC address of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventDstMac 1.3.6.1.4.1.25597.1.1.2.1.10
Destination MAC address of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventDstPort 1.3.6.1.4.1.25597.1.1.2.1.11
Attacked port of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

eventVlan 1.3.6.1.4.1.25597.1.1.2.1.12
VLAN of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

eventProtocol 1.3.6.1.4.1.25597.1.1.2.1.13
IP protocol of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventProfileId 1.3.6.1.4.1.25597.1.1.2.1.14
Profile ID of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

eventOsInfo 1.3.6.1.4.1.25597.1.1.2.1.15
OS info of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventService 1.3.6.1.4.1.25597.1.1.2.1.16
Attacked service of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventAttackType 1.3.6.1.4.1.25597.1.1.2.1.17
Attack type of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventSignatureName 1.3.6.1.4.1.25597.1.1.2.1.18
Signature name of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventSignatureType 1.3.6.1.4.1.25597.1.1.2.1.19
Signature type of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventSrcHost 1.3.6.1.4.1.25597.1.1.2.1.20
Host name of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventCncNo 1.3.6.1.4.1.25597.1.1.2.1.21
Cncno of event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

alertSignatureId 1.3.6.1.4.1.25597.1.1.2.1.22
Malware Identification
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

alertCncHost 1.3.6.1.4.1.25597.1.1.2.1.23
Alert CNC host name
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

alertCncPort 1.3.6.1.4.1.25597.1.1.2.1.24
Alert CNC Port
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

alertChecksum 1.3.6.1.4.1.25597.1.1.2.1.25
Alert Malware Checksum
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

alertAnalysisType 1.3.6.1.4.1.25597.1.1.2.1.26
Alert analysis type
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

alertProfile 1.3.6.1.4.1.25597.1.1.2.1.27
Alert analysis profile
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

alertAction 1.3.6.1.4.1.25597.1.1.2.1.28
Alert action taken
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

alertInterface 1.3.6.1.4.1.25597.1.1.2.1.29
Appliance interface
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

alertSensorIp 1.3.6.1.4.1.25597.1.1.2.1.30
Appliance IP address
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

alertSensorHost 1.3.6.1.4.1.25597.1.1.2.1.31
Appliance host name
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

alertSensorProduct 1.3.6.1.4.1.25597.1.1.2.1.32
Product Name
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

alertSensorRelease 1.3.6.1.4.1.25597.1.1.2.1.33
Alert URL
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

alertUrl 1.3.6.1.4.1.25597.1.1.2.1.34
Alert URL
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

eventSrcAddrType 1.3.6.1.4.1.25597.1.1.2.1.35
Source IP address type
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

eventSrcAddr 1.3.6.1.4.1.25597.1.1.2.1.36
Source IP address
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

eventDstAddrType 1.3.6.1.4.1.25597.1.1.2.1.37
Destination IP address type
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

eventDstAddr 1.3.6.1.4.1.25597.1.1.2.1.38
Destination IP address
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

eventSensorAddrType 1.3.6.1.4.1.25597.1.1.2.1.39
Sensor IP address type
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

eventSensorAddr 1.3.6.1.4.1.25597.1.1.2.1.40
Sensor IP address
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

eventSrcPort 1.3.6.1.4.1.25597.1.1.2.1.41
Source port
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

eventDateTime 1.3.6.1.4.1.25597.1.1.2.1.42
Date and time of the event
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

ipsSignatureId 1.3.6.1.4.1.25597.1.1.2.1.43
IPS signature id
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

ipsSignatureRevision 1.3.6.1.4.1.25597.1.1.2.1.44
IPS signature revision
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

ipsMatchCount 1.3.6.1.4.1.25597.1.1.2.1.45
Attack count
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Gauge32  

ipsSeverity 1.3.6.1.4.1.25597.1.1.2.1.46
Severity
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

ipsSignatureName 1.3.6.1.4.1.25597.1.1.2.1.47
Name of the signature
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

ipsReferenceId 1.3.6.1.4.1.25597.1.1.2.1.48
Reference ID
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

ipsBlockMode 1.3.6.1.4.1.25597.1.1.2.1.49
isBlocked
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

ipsAttackTarget 1.3.6.1.4.1.25597.1.1.2.1.50
Attack target
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

notificationPrefix 1.3.6.1.4.1.25597.3.0
OBJECT IDENTIFIER    

fireeyeAlert 1.3.6.1.4.1.25597.3.0.1
Execution anomaly detected
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

executionAnomaly 1.3.6.1.4.1.25597.3.0.2
Execution anomaly detected
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

networkAnomaly 1.3.6.1.4.1.25597.3.0.3
Network anomaly detected
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

signatureMatch 1.3.6.1.4.1.25597.3.0.4
Signature match detected
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

ccConnect 1.3.6.1.4.1.25597.3.0.9
CC connect detected
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

ccSigmatch 1.3.6.1.4.1.25597.3.0.10
CC sigmatch detected
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

osChange 1.3.6.1.4.1.25597.3.0.11
OS change anomaly detected
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

ipsAlert 1.3.6.1.4.1.25597.3.0.12
IPS anomaly detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

feCommon 1.3.6.1.4.1.25597.11
OBJECT IDENTIFIER    

feCMS 1.3.6.1.4.1.25597.12
OBJECT IDENTIFIER    

feEMPS 1.3.6.1.4.1.25597.13
OBJECT IDENTIFIER    

feWMPS 1.3.6.1.4.1.25597.14
OBJECT IDENTIFIER    

feMAS 1.3.6.1.4.1.25597.15
OBJECT IDENTIFIER    

feMibAdminInfo 1.3.6.1.4.1.25597.20
OBJECT IDENTIFIER    

feSystem 1.3.6.1.4.1.25597.11.1
OBJECT IDENTIFIER    

feStorage 1.3.6.1.4.1.25597.11.2
OBJECT IDENTIFIER    

fePowerSupply 1.3.6.1.4.1.25597.11.3
OBJECT IDENTIFIER    

feFanHealth 1.3.6.1.4.1.25597.11.4
OBJECT IDENTIFIER    

feApplication 1.3.6.1.4.1.25597.11.5
OBJECT IDENTIFIER    

feSystemInfo 1.3.6.1.4.1.25597.11.1.1
OBJECT IDENTIFIER    

feSystemTraps 1.3.6.1.4.1.25597.11.1.0
OBJECT IDENTIFIER    

feSystemStatus 1.3.6.1.4.1.25597.11.1.1.1
Overall system status
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feHardwareModel 1.3.6.1.4.1.25597.11.1.1.2
Hardware model
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feSerialNumber 1.3.6.1.4.1.25597.11.1.1.3
Serial number
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feTemperatureValue 1.3.6.1.4.1.25597.11.1.1.4
System temperature in Celsius
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

feTemperatureStatus 1.3.6.1.4.1.25597.11.1.1.5
System temperature status
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feTemperatureIsHealthy 1.3.6.1.4.1.25597.11.1.1.6
Whether or not the temperature is normal.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feIfLinkChangeIfname 1.3.6.1.4.1.25597.11.1.1.7
The name of the interface that has changed its speed.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

feIfLinkChangeOldAdminUp 1.3.6.1.4.1.25597.11.1.1.8
The old admin up state of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

feIfLinkChangeNewAdminUp 1.3.6.1.4.1.25597.11.1.1.9
The new admin up state of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

feIfLinkChangeOldLinkUp 1.3.6.1.4.1.25597.11.1.1.10
The old link up state of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

feIfLinkChangeNewLinkUp 1.3.6.1.4.1.25597.11.1.1.11
The new link up state of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

feIfLinkChangeOldSpeed 1.3.6.1.4.1.25597.11.1.1.12
The old speed of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

feIfLinkChangeNewSpeed 1.3.6.1.4.1.25597.11.1.1.13
The new speed of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

feIfLinkChangeOldDuplex 1.3.6.1.4.1.25597.11.1.1.14
The old duplex of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

feIfLinkChangeNewDuplex 1.3.6.1.4.1.25597.11.1.1.15
The new duplex of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

feIfLinkChangeOldAutoNeg 1.3.6.1.4.1.25597.11.1.1.16
The old auto negotiation of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

feIfLinkChangeNewAutoNeg 1.3.6.1.4.1.25597.11.1.1.17
The new auto negotiation of the interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

feExcessiveTemperature 1.3.6.1.4.1.25597.11.1.0.1
Excessive temperature has reached.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

feNormalTemperature 1.3.6.1.4.1.25597.11.1.0.2
Temperature is normal.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

feIfLinkChange 1.3.6.1.4.1.25597.11.1.0.3
The speed of an interface has changed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

feStorageInfo 1.3.6.1.4.1.25597.11.2.1
OBJECT IDENTIFIER    

feStorageTraps 1.3.6.1.4.1.25597.11.2.0
OBJECT IDENTIFIER    

feRaidStatus 1.3.6.1.4.1.25597.11.2.1.1
RAID status
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feRaidIsHealthy 1.3.6.1.4.1.25597.11.2.1.2
Whether or not RAID is healthy overall.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

fePhysicalDiskTable 1.3.6.1.4.1.25597.11.2.1.3
The physical disk table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FePhysicalDiskEntry

fePhysicalDiskEntry 1.3.6.1.4.1.25597.11.2.1.3.1
An entry for one physical disk
Status: current Access: not-accessible
OBJECT-TYPE    
  FePhysicalDiskEntry  

fePhysicalDiskIndex 1.3.6.1.4.1.25597.11.2.1.3.1.1
A unique value for each disk
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

fePhysicalDiskName 1.3.6.1.4.1.25597.11.2.1.3.1.2
Physical disk name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fePhysicalDiskStatus 1.3.6.1.4.1.25597.11.2.1.3.1.3
Physical disk status
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fePhysicalDiskIsHealthy 1.3.6.1.4.1.25597.11.2.1.3.1.4
Whether a physical disk is healthy.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

fePhysicalDiskDeviceSupport 1.3.6.1.4.1.25597.11.2.1.3.1.5
Physical disk configuration, e.g. RAID
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fePhysicalDiskSelfAssess 1.3.6.1.4.1.25597.11.2.1.3.1.6
Self assess of a physical disk
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fePhysicalDiskTotalBytes 1.3.6.1.4.1.25597.11.2.1.3.1.7
The capacity of a physical disk.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feRaidFailure 1.3.6.1.4.1.25597.11.2.0.1
A RAID error has occurred.
Status: current Access: read-only
NOTIFICATION-TYPE    

feRaidRecover 1.3.6.1.4.1.25597.11.2.0.2
RAID has recovered.
Status: current Access: read-only
NOTIFICATION-TYPE    

fePhysicalDiskFailure 1.3.6.1.4.1.25597.11.2.0.3
A physical disk has failed.
Status: current Access: read-only
NOTIFICATION-TYPE    

fePhysicalDiskRecover 1.3.6.1.4.1.25597.11.2.0.4
A physical disk has recovered.
Status: current Access: read-only
NOTIFICATION-TYPE    

fePowerSupplyInfo 1.3.6.1.4.1.25597.11.3.1
OBJECT IDENTIFIER    

fePowerSupplyTraps 1.3.6.1.4.1.25597.11.3.0
OBJECT IDENTIFIER    

fePowerSupplyOverallStatus 1.3.6.1.4.1.25597.11.3.1.1
Overall power supply status
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fePowerSupplyOverallIsHealthy 1.3.6.1.4.1.25597.11.3.1.2
Whether or not power supply is healthy overall.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

fePowerSupplyTable 1.3.6.1.4.1.25597.11.3.1.3
The power supply table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FePowerSupplyEntry

fePowerSupplyEntry 1.3.6.1.4.1.25597.11.3.1.3.1
An entry for one physical disk
Status: current Access: not-accessible
OBJECT-TYPE    
  FePowerSupplyEntry  

fePowerSupplyIndex 1.3.6.1.4.1.25597.11.3.1.3.1.1
A unique value for each power supply
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

fePowerSupplyStatus 1.3.6.1.4.1.25597.11.3.1.3.1.2
Power supply status
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

fePowerSupplyIsHealthy 1.3.6.1.4.1.25597.11.3.1.3.1.3
Whether a power supply is healthy.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

fePowerSupplyFailure 1.3.6.1.4.1.25597.11.3.0.1
A power supply has failed.
Status: current Access: read-only
NOTIFICATION-TYPE    

fePowerSupplyRecover 1.3.6.1.4.1.25597.11.3.0.2
A power supply has recovered.
Status: current Access: read-only
NOTIFICATION-TYPE    

feFanHealthInfo 1.3.6.1.4.1.25597.11.4.1
OBJECT IDENTIFIER    

feFanHealthTraps 1.3.6.1.4.1.25597.11.4.0
OBJECT IDENTIFIER    

feFanOverallStatus 1.3.6.1.4.1.25597.11.4.1.1
Overall fan status
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feFanOverallIsHealthy 1.3.6.1.4.1.25597.11.4.1.2
Whether or not fan is healthy overall.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feFanStatusTable 1.3.6.1.4.1.25597.11.4.1.3
The Fan Status table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FeFanStatusEntry

feFanStatusEntry 1.3.6.1.4.1.25597.11.4.1.3.1
An entry for one fan
Status: current Access: not-accessible
OBJECT-TYPE    
  FeFanStatusEntry  

feFanIndex 1.3.6.1.4.1.25597.11.4.1.3.1.1
A unique value for each fan status table entry
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feFanStatus 1.3.6.1.4.1.25597.11.4.1.3.1.2
Fan status
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feFanIsHealthy 1.3.6.1.4.1.25597.11.4.1.3.1.3
Whether a fan is healthy.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feFanSpeed 1.3.6.1.4.1.25597.11.4.1.3.1.4
Fan speed in rpm
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feFanFailure 1.3.6.1.4.1.25597.11.4.0.1
A fan has failed.
Status: current Access: read-only
NOTIFICATION-TYPE    

feFanRecover 1.3.6.1.4.1.25597.11.4.0.2
A fan has recovered.
Status: current Access: read-only
NOTIFICATION-TYPE    

feApplicationInfo 1.3.6.1.4.1.25597.11.5.1
OBJECT IDENTIFIER    

feApplicationTraps 1.3.6.1.4.1.25597.11.5.0
OBJECT IDENTIFIER    

feInstalledSystemImage 1.3.6.1.4.1.25597.11.5.1.1
Current installed system image
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feSystemImageVersionCurrent 1.3.6.1.4.1.25597.11.5.1.2
Current system image version
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feSystemImageVersionLatest 1.3.6.1.4.1.25597.11.5.1.3
Latest system image version
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feIsSystemImageLatest 1.3.6.1.4.1.25597.11.5.1.4
Whether or not the current system image is the latest.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feSecurityContentVersion 1.3.6.1.4.1.25597.11.5.1.5
Security content version
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feLastContentUpdatePassed 1.3.6.1.4.1.25597.11.5.1.6
Whether the last security content updated has passed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feLastContentUpdateTime 1.3.6.1.4.1.25597.11.5.1.7
The last update time for security contents
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feGIVersionTable 1.3.6.1.4.1.25597.11.5.1.8
The guest image version table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FeGIVersionEntry

feGIVersionEntry 1.3.6.1.4.1.25597.11.5.1.8.1
An entry for one guest image
Status: current Access: not-accessible
OBJECT-TYPE    
  FeGIVersionEntry  

feGIIndex 1.3.6.1.4.1.25597.11.5.1.8.1.1
A unique value for each guest image
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feGIName 1.3.6.1.4.1.25597.11.5.1.8.1.2
Guest image name
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feGIVersion 1.3.6.1.4.1.25597.11.5.1.8.1.3
Guest image version
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feGIEnabled 1.3.6.1.4.1.25597.11.5.1.8.1.4
Whether guest image is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feGIInstallDateTime 1.3.6.1.4.1.25597.11.5.1.8.1.5
Guest image install date and time
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feActiveVMs 1.3.6.1.4.1.25597.11.5.1.9
Number of active VMs
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feProductLicenseActive 1.3.6.1.4.1.25597.11.5.1.10
Whether the product license is active.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feContentLicenseActive 1.3.6.1.4.1.25597.11.5.1.11
Whether the content license is active.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feSupportLicenseActive 1.3.6.1.4.1.25597.11.5.1.12
Whether the support license is active.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feLicenseFeatureName 1.3.6.1.4.1.25597.11.5.1.13
License feature name for the feLicenseStateChanged event.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

feLicenseNewActiveState 1.3.6.1.4.1.25597.11.5.1.14
The new license active state for the feLicenseStateChanged event.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

feLicenseOldActiveState 1.3.6.1.4.1.25597.11.5.1.15
The old license active state for the feLicenseStateChanged event.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TruthValue  

feLicenseStateChanged 1.3.6.1.4.1.25597.11.5.0.1
A license state has changed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

feSecurityUpdateFailed 1.3.6.1.4.1.25597.11.5.0.2
Security update has failed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

feCMSInfo 1.3.6.1.4.1.25597.12.1
OBJECT IDENTIFIER    

feCMSTraps 1.3.6.1.4.1.25597.12.0
OBJECT IDENTIFIER    

feTotalAppliancesAttached 1.3.6.1.4.1.25597.12.1.1
Total appliances attached
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feTotalWMPSAttached 1.3.6.1.4.1.25597.12.1.2
Total WMPS attached
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feTotalEMPSAttached 1.3.6.1.4.1.25597.12.1.3
Total EMPS attached
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feTotalFMPSAttached 1.3.6.1.4.1.25597.12.1.4
Total FMPS attached
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feTotalMASAttached 1.3.6.1.4.1.25597.12.1.5
Total MAS attached
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feCMSApplianceTable 1.3.6.1.4.1.25597.12.1.6
The CMS managed appliance table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FeCMSApplianceEntry

feCMSApplianceEntry 1.3.6.1.4.1.25597.12.1.6.1
An entry for one CMS managed appliance
Status: current Access: not-accessible
OBJECT-TYPE    
  FeCMSApplianceEntry  

feCMSApplianceIndex 1.3.6.1.4.1.25597.12.1.6.1.1
A unique value for each CMS managed appliance
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feCMSApplianceName 1.3.6.1.4.1.25597.12.1.6.1.2
The name of the CMS managed appliance
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

feCMSApplianceDiskSpacePassed 1.3.6.1.4.1.25597.12.1.6.1.3
Whether a CMS managed appliance passed disk space check.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feCMSApplianceFanPassed 1.3.6.1.4.1.25597.12.1.6.1.4
Whether a CMS managed appliance passed fan check.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feCMSAppliancePowerSupplyPassed 1.3.6.1.4.1.25597.12.1.6.1.5
Whether a CMS managed appliance passed power supply check.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feCMSApplianceRaidPassed 1.3.6.1.4.1.25597.12.1.6.1.6
Whether a CMS managed appliance passed RAID check.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feCMSApplianceTemperaturePassed 1.3.6.1.4.1.25597.12.1.6.1.7
Whether a CMS managed appliance passed temperature check.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

feCMSHAUnexpectedFailover 1.3.6.1.4.1.25597.12.0.1
An unexpected fail-over on CMS-HA has occurred.
Status: current Access: read-only
NOTIFICATION-TYPE    

feCMSHAManualFailover 1.3.6.1.4.1.25597.12.0.2
A manual fail-over on CMS-HA has occurred.
Status: current Access: read-only
NOTIFICATION-TYPE    

feEMPSInfo 1.3.6.1.4.1.25597.13.1
OBJECT IDENTIFIER    

feEMPSTraps 1.3.6.1.4.1.25597.13.0
OBJECT IDENTIFIER    

feTotalEmailCount 1.3.6.1.4.1.25597.13.1.1
This is a count of all the emails coming into postfix and also includes emails which do not contain any URL or attachment (email on fast path). This will be the cumulative value and maintained across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalEmailCountH 1.3.6.1.4.1.25597.13.1.2
This is a count of all the emails coming into postfix and also includes emails which do not contain any URL or attachment (email on fast path). This will be the cumulative value and maintained across appliance reboots. feTotalEmailCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalEmailCountL 1.3.6.1.4.1.25597.13.1.3
This is a count of all the emails coming into postfix and also includes emails which do not contain any URL or attachment (email on fast path). This will be the cumulative value and maintained across appliance reboots. feTotalEmailCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feInfectedEmailCount 1.3.6.1.4.1.25597.13.1.4
This is a count of all the email which are determined to be malicious. This is the same as 'Total Email Received with Malicious Content' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feInfectedEmailCountH 1.3.6.1.4.1.25597.13.1.5
This is a count of all the email which are determined to be malicious. This is the same as 'Total Email Received with Malicious Content' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feInfectedEmailCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feInfectedEmailCountL 1.3.6.1.4.1.25597.13.1.6
This is a count of all the email which are determined to be malicious. This is the same as 'Total Email Received with Malicious Content' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feInfectedEmailCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feAnalyzedEmailCount 1.3.6.1.4.1.25597.13.1.7
This is cumulative count of all the email which were analyzed. This is the same as 'Total Emails Received and Analyzed' that we currently show in the output to CLI command 'show email-analysis statistics'. This counter will maintain its value across reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feAnalyzedEmailCountH 1.3.6.1.4.1.25597.13.1.8
This is cumulative count of all the email which were analyzed. This is the same as 'Total Emails Received and Analyzed' that we currently show in the output to CLI command 'show email-analysis statistics'. This counter will maintain its value across reboots. feAnalyzedEmailCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feAnalyzedEmailCountL 1.3.6.1.4.1.25597.13.1.9
This is cumulative count of all the email which were analyzed. This is the same as 'Total Emails Received and Analyzed' that we currently show in the output to CLI command 'show email-analysis statistics'. This counter will maintain its value across reboots. feAnalyzedEmailCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalUrlCount 1.3.6.1.4.1.25597.13.1.10
This is a count of all the URLs received whether they are processed or not. This is the same as 'Total URLs Received' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalUrlCountH 1.3.6.1.4.1.25597.13.1.11
This is a count of all the URLs received whether they are processed or not. This is the same as 'Total URLs Received' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feTotalUrlCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalUrlCountL 1.3.6.1.4.1.25597.13.1.12
This is a count of all the URLs received whether they are processed or not. This is the same as 'Total URLs Received' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feTotalUrlCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feInfectedUrlCount 1.3.6.1.4.1.25597.13.1.13
This is a count of all the URLs that are determined to be malicious and is the same as 'Total URLs Considered Malicious' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feInfectedUrlCountH 1.3.6.1.4.1.25597.13.1.14
This is a count of all the URLs that are determined to be malicious and is the same as 'Total URLs Considered Malicious' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feInfectedUrlCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feInfectedUrlCountL 1.3.6.1.4.1.25597.13.1.15
This is a count of all the URLs that are determined to be malicious and is the same as 'Total URLs Considered Malicious' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feInfectedUrlCountH is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feAnalyzedUrlCount 1.3.6.1.4.1.25597.13.1.16
This is the cumulative count of all the URLs that were analyzed and is the same as 'Total URLs Analyzed' that we currently show in the output to CLI command 'show email-analysis statistics'. This counter will maintain its value across reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feAnalyzedUrlCountH 1.3.6.1.4.1.25597.13.1.17
This is the cumulative count of all the URLs that were analyzed and is the same as 'Total URLs Analyzed' that we currently show in the output to CLI command 'show email-analysis statistics'. This counter will maintain its value across reboots. feAnalyzedUrlCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feAnalyzedUrlCountL 1.3.6.1.4.1.25597.13.1.18
This is the cumulative count of all the URLs that were analyzed and is the same as 'Total URLs Analyzed' that we currently show in the output to CLI command 'show email-analysis statistics'. This counter will maintain its value across reboots. feAnalyzedUrlCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalAttachmentCount 1.3.6.1.4.1.25597.13.1.19
This is a count of all the attachment received whether they are processed or not. This is the same as 'Total Attachments Received' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalAttachmentCountH 1.3.6.1.4.1.25597.13.1.20
This is a count of all the attachment received whether they are processed or not. This is the same as 'Total Attachments Received' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feTotalAttachmentCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalAttachmentCountL 1.3.6.1.4.1.25597.13.1.21
This is a count of all the attachment received whether they are processed or not. This is the same as 'Total Attachments Received' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feTotalAttachmentCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feInfectedAttachmentCount 1.3.6.1.4.1.25597.13.1.22
This is a count of all the attachment that are determined to be malicious and is the same as 'Total Attachments Considered Malicious' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feInfectedAttachmentCountH 1.3.6.1.4.1.25597.13.1.23
This is a count of all the attachment that are determined to be malicious and is the same as 'Total Attachments Considered Malicious' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feInfectedAttachmentCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feInfectedAttachmentCountL 1.3.6.1.4.1.25597.13.1.24
This is a count of all the attachment that are determined to be malicious and is the same as 'Total Attachments Considered Malicious' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feInfectedAttachmentCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feAnalyzedAttachmentCount 1.3.6.1.4.1.25597.13.1.25
This is the cumulative count of all the attachment that we analyzed for maliciousness. This is the same as 'Total Attachments Analyzed' that we currently show in the output to CLI command 'show email-analysis statistics'. This counter will maintain its value across reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feAnalyzedAttachmentCountH 1.3.6.1.4.1.25597.13.1.26
This is the cumulative count of all the attachment that we analyzed for maliciousness. This is the same as 'Total Attachments Analyzed' that we currently show in the output to CLI command 'show email-analysis statistics'. This counter will maintain its value across reboots. feAnalyzedAttachmentCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feAnalyzedAttachmentCountL 1.3.6.1.4.1.25597.13.1.27
This is the cumulative count of all the attachment that we analyzed for maliciousness. This is the same as 'Total Attachments Analyzed' that we currently show in the output to CLI command 'show email-analysis statistics'. This counter will maintain its value across reboots. feAnalyzedAttachmentCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalEmailHasAttachment 1.3.6.1.4.1.25597.13.1.28
This is a count of all the emails containing at least one attachment. This value will be the cumulative and preserved across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalEmailHasAttachmentH 1.3.6.1.4.1.25597.13.1.29
This is a count of all the emails containing at least one attachment. This value will be the cumulative and preserved across appliance reboots. feTotalEmailHasAttachmentH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalEmailHasAttachmentL 1.3.6.1.4.1.25597.13.1.30
This is a count of all the emails containing at least one attachment. This value will be the cumulative and preserved across appliance reboots. feTotalEmailHasAttachmentL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalEmailHasUrl 1.3.6.1.4.1.25597.13.1.31
This is a count of all the emails containing at least one URL. This value will be the cumulative and preserved across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalEmailHasUrlH 1.3.6.1.4.1.25597.13.1.32
This is a count of all the emails containing at least one URL. This value will be the cumulative and preserved across appliance reboots. feTotalEmailHasUrlH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalEmailHasUrlL 1.3.6.1.4.1.25597.13.1.33
This is a count of all the emails containing at least one URL. This value will be the cumulative and preserved across appliance reboots. feTotalEmailHasUrlL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalEmailHasBadAttachment 1.3.6.1.4.1.25597.13.1.34
This is a count of all the emails containing at least one attachment determined to be malicious. This value will be the cumulative and preserved across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalEmailHasBadAttachmentH 1.3.6.1.4.1.25597.13.1.35
This is a count of all the emails containing at least one attachment determined to be malicious. This value will be the cumulative and preserved across appliance reboots. feTotalEmailHasBadAttachmentH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalEmailHasBadAttachmentL 1.3.6.1.4.1.25597.13.1.36
This is a count of all the emails containing at least one attachment determined to be malicious. This value will be the cumulative and preserved across appliance reboots. feTotalEmailHasBadAttachmentL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalEmailHasBadUrl 1.3.6.1.4.1.25597.13.1.37
This is a count of all the emails containing at least one URL determined to be malicious. This value will be the cumulative and preserved across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalEmailHasBadUrlH 1.3.6.1.4.1.25597.13.1.38
This is a count of all the emails containing at least one URL determined to be malicious. This value will be the cumulative and preserved across appliance reboots. feTotalEmailHasBadUrlH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalEmailHasBadUrlL 1.3.6.1.4.1.25597.13.1.39
This is a count of all the emails containing at least one URL determined to be malicious. This value will be the cumulative and preserved across appliance reboots. feTotalEmailHasBadUrlL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feeQuarantineUsage 1.3.6.1.4.1.25597.13.1.40
This is consumed capacity in term of percentage of max capacity. This is a snapshot value and represents current consumption value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

feBypassEmailCount 1.3.6.1.4.1.25597.13.1.41
This is a count of Bypassed Emails and is the same as 'Total Emails Bypassed' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feBypassEmailCountH 1.3.6.1.4.1.25597.13.1.42
This is a count of Bypassed Emails and is the same as 'Total Emails Bypassed' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feBypassEmailCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feBypassEmailCountL 1.3.6.1.4.1.25597.13.1.43
This is a count of Bypassed Emails and is the same as 'Total Emails Bypassed' that we currently show in the output to CLI command 'show email-analysis statistics'. This will be the cumulative value and is maintained across appliance reboots. feBypassEmailCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feDeferredEmailCount 1.3.6.1.4.1.25597.13.1.44
This is a count of deferred emails and will represent snapshot current value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feHoldQueueEmailCount 1.3.6.1.4.1.25597.13.1.45
This is a count of emails in the hold queue and will represent current snapshot value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feOpenSmtpConnections 1.3.6.1.4.1.25597.13.1.46
This is a snapshot value of currently open SMTP connections.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

feDeferredQueueThreshold 1.3.6.1.4.1.25597.13.0.1
Deferred queue email count exceeded a certain threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

feBypassCountThreshold 1.3.6.1.4.1.25597.13.0.2
Current bypass count exceeded a certain threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

feSmtpInterfaceRefuseConnection 1.3.6.1.4.1.25597.13.0.3
SMTP interface set to refuse connections because of congestion.
Status: current Access: read-only
NOTIFICATION-TYPE    

feSmtpInterfaceRecover 1.3.6.1.4.1.25597.13.0.4
SMTP interface re-enabled after recover.
Status: current Access: read-only
NOTIFICATION-TYPE    

feEMPSBypassStateEntered 1.3.6.1.4.1.25597.13.0.5
Email bypass state entered.
Status: current Access: read-only
NOTIFICATION-TYPE    

feEMPSBypassStateExited 1.3.6.1.4.1.25597.13.0.6
Email bypass state exited.
Status: current Access: read-only
NOTIFICATION-TYPE    

feWMPSInfo 1.3.6.1.4.1.25597.14.1
OBJECT IDENTIFIER    

feWMPSTraps 1.3.6.1.4.1.25597.14.0
OBJECT IDENTIFIER    

feHttpThroughputNotIncrease 1.3.6.1.4.1.25597.14.0.1
HTTP throughput has not increased for a specified time.
Status: current Access: read-only
NOTIFICATION-TYPE    

feHardwareBypassEntered 1.3.6.1.4.1.25597.14.0.2
Permanent hardware bypass mode entered.
Status: current Access: read-only
NOTIFICATION-TYPE    

feMASInfo 1.3.6.1.4.1.25597.15.1
OBJECT IDENTIFIER    

feMASTraps 1.3.6.1.4.1.25597.15.0
OBJECT IDENTIFIER    

feTotalObjectAnalyzedCount 1.3.6.1.4.1.25597.15.1.1
This is a count of all the object analyzed, including all children of any samples, including URL.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalObjectAnalyzedCountH 1.3.6.1.4.1.25597.15.1.2
This is a count of all the object analyzed, including all children of any samples, including URL. feTotalObjectAnalyzedCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalObjectAnalyzedCountL 1.3.6.1.4.1.25597.15.1.3
This is a count of all the object analyzed, including all children of any samples, including URL. feTotalObjectAnalyzedCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalMaliciousObjectCount 1.3.6.1.4.1.25597.15.1.4
This is a count of all malicious samples detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalMaliciousObjectCountH 1.3.6.1.4.1.25597.15.1.5
This is a count of all malicious samples detected. feTotalMaliciousObjectCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalMaliciousObjectCountL 1.3.6.1.4.1.25597.15.1.6
This is a count of all malicious samples detected. feTotalMaliciousObjectCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalUrlAnalyzedCount 1.3.6.1.4.1.25597.15.1.7
This is a count of all samples that has file type: url.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalUrlAnalyzedCountH 1.3.6.1.4.1.25597.15.1.8
This is a count of all samples that has file type: url. feTotalUrlAnalyzedCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalUrlAnalyzedCountL 1.3.6.1.4.1.25597.15.1.9
This is a count of all samples that has file type: url. feTotalUrlAnalyzedCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalMaliciousUrlCount 1.3.6.1.4.1.25597.15.1.10
This is a count of all samples that has file type 'url' and also are malicious.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalMaliciousUrlCountH 1.3.6.1.4.1.25597.15.1.11
This is a count of all samples that has file type 'url' and also are malicious. feTotalMaliciousUrlCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalMaliciousUrlCountL 1.3.6.1.4.1.25597.15.1.12
This is a count of all samples that has file type 'url' and also are malicious. feTotalMaliciousUrlCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalFileUploadedCount 1.3.6.1.4.1.25597.15.1.13
This is a count of all object that has no parent (basically, children will not be counted).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalFileUploadedCountH 1.3.6.1.4.1.25597.15.1.14
This is a count of all object that has no parent (basically, children will not be counted). feTotalFileUploadedCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalFileUploadedCountL 1.3.6.1.4.1.25597.15.1.15
This is a count of all object that has no parent (basically, children will not be counted). feTotalFileUploadedCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalMaliciousFileCount 1.3.6.1.4.1.25597.15.1.16
This is a count of all object that has no parent (basically children will not be counted), and are not URL.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalMaliciousFileCountH 1.3.6.1.4.1.25597.15.1.17
This is a count of all object that has no parent (basically children will not be counted), and are not URL. feTotalMaliciousFileCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalMaliciousFileCountL 1.3.6.1.4.1.25597.15.1.18
This is a count of all object that has no parent (basically children will not be counted), and are not URL. feTotalMaliciousFileCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalLiveModeCount 1.3.6.1.4.1.25597.15.1.19
This is a count of all object that are submitted for live mode.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalLiveModeCountH 1.3.6.1.4.1.25597.15.1.20
This is a count of all object that are submitted for live mode. feTotalLiveModeCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalLiveModeCountL 1.3.6.1.4.1.25597.15.1.21
This is a count of all object that are submitted for live mode. feTotalLiveModeCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalMaliciousLiveModeCount 1.3.6.1.4.1.25597.15.1.22
This is a count of all object that are submitted for live mode and are malicious. Live mode object has no children.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

feTotalMaliciousLiveModeCountH 1.3.6.1.4.1.25597.15.1.23
This is a count of all object that are submitted for live mode and are malicious. Live mode object has no children. feTotalMaliciousLiveModeCountH is the high order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feTotalMaliciousLiveModeCountL 1.3.6.1.4.1.25597.15.1.24
This is a count of all object that are submitted for live mode and are malicious. Live mode object has no children. feTotalMaliciousLiveModeCountL is the low order 32bit of the 64bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

feMaid 1.3.6.1.4.1.25597.15.1.25
ID of the malicious sample/url.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CounterBasedGauge64  

feMaliciousMaid 1.3.6.1.4.1.25597.15.0.1
A malicious URL or file detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

feMibCompliances 1.3.6.1.4.1.25597.20.2
OBJECT IDENTIFIER    

feMibGroups 1.3.6.1.4.1.25597.20.3
OBJECT IDENTIFIER    

feMibCompliance 1.3.6.1.4.1.25597.20.2.1
The requirements for conformance to the FireEye MIB.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

feVariablesGroup 1.3.6.1.4.1.25597.20.3.1
This groups contains objects for malware alerts.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

feNotificationsGroup 1.3.6.1.4.1.25597.20.3.2
This groups contains notifications for malware alerts.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

feSystemInfoGroup 1.3.6.1.4.1.25597.20.3.11
FireEye System Info Group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

feSystemTrapGroup 1.3.6.1.4.1.25597.20.3.12
FireEye System Trap Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

feStorageInfoGroup 1.3.6.1.4.1.25597.20.3.13
FireEye Storage Info Group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

feStorageTrapGroup 1.3.6.1.4.1.25597.20.3.14
FireEye Storage Trap Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

fePowerSupplyInfoGroup 1.3.6.1.4.1.25597.20.3.15
FireEye Power Supply Info Group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

fePowerSupplyTrapGroup 1.3.6.1.4.1.25597.20.3.16
FireEye Power Supply Trap Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

feFanHealthInfoGroup 1.3.6.1.4.1.25597.20.3.17
FireEye Fan Health Info Group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

feFanHealthTrapGroup 1.3.6.1.4.1.25597.20.3.18
FireEye Fan Health Trap Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

feApplicationInfoGroup 1.3.6.1.4.1.25597.20.3.19
FireEye Application Info Group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

feApplicationTrapGroup 1.3.6.1.4.1.25597.20.3.20
FireEye Application Trap Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

feCMSInfoGroup 1.3.6.1.4.1.25597.20.3.21
FireEye CMPS Info Group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

feCMSTrapGroup 1.3.6.1.4.1.25597.20.3.22
FireEye CMS Trap Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

feEMPSInfoGroup 1.3.6.1.4.1.25597.20.3.23
FireEye Email MPS Group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

feEMPSTrapGroup 1.3.6.1.4.1.25597.20.3.24
FireEye Email MPS Trap Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

feWMPSTrapGroup 1.3.6.1.4.1.25597.20.3.26
FireEye Web MPS Trap Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

feMASInfoGroup 1.3.6.1.4.1.25597.20.3.27
FireEye MAS Group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

feMASTrapGroup 1.3.6.1.4.1.25597.20.3.28
FireEye MAS Trap Group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP