FASTPATH-DENIALOFSERVICE-PRIVATE-MIB

File: FASTPATH-DENIALOFSERVICE-PRIVATE-MIB.mib (10701 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
RFC1213-MIB BROADCOM-REF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Integer32 TEXTUAL-CONVENTION
RowStatus MacAddress ifIndex
DisplayString fastPath

Defined Values

fastPathDenialOfService 1.3.6.1.4.1.4413.1.1.31
The Broadcom Private MIB for FASTPATH Denial of Service.
MODULE-IDENTITY    

agentSwitchDenialOfServiceGroup 1.3.6.1.4.1.4413.1.1.31.1
OBJECT IDENTIFIER    

agentSwitchDenialOfServiceSIPDIPMode 1.3.6.1.4.1.4413.1.1.31.1.1
Enables or Disables the SIP=DIP Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceSMACDMACMode 1.3.6.1.4.1.4413.1.1.31.1.9
Enables or Disables the SMAC=DMAC Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceFirstFragMode 1.3.6.1.4.1.4413.1.1.31.1.2
Enables or Disables the First Fragment Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceTCPHdrSize 1.3.6.1.4.1.4413.1.1.31.1.3
Configures the Minimum allowed TCP Header size. This is active if the First Fragment Denial of Service protection feature is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

agentSwitchDenialOfServiceTCPFragMode 1.3.6.1.4.1.4413.1.1.31.1.4
Enables or Disables the TCP Fragment Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceTCPOffsetMode 1.3.6.1.4.1.4413.1.1.31.1.10
Enables or Disables the TCP Offset Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceTCPFlagMode 1.3.6.1.4.1.4413.1.1.31.1.5
Enables or Disables the TCP Flag Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceTCPFlagSeqMode 1.3.6.1.4.1.4413.1.1.31.1.11
Enables or Disables the TCP Flag and Sequence Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceTCPSynMode 1.3.6.1.4.1.4413.1.1.31.1.14
Enables or Disables the TCP Syn Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceTCPSynFinMode 1.3.6.1.4.1.4413.1.1.31.1.15
Enables or Disables the TCP Syn and Fin Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceTCPFinUrgPshMode 1.3.6.1.4.1.4413.1.1.31.1.16
Enables or Disables the TCP Fin and Urg and Psh Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceL4PortMode 1.3.6.1.4.1.4413.1.1.31.1.6
Enables or Disables the L4 Port Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceTCPPortMode 1.3.6.1.4.1.4413.1.1.31.1.12
Enables or Disables the TCP Port Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceUDPPortMode 1.3.6.1.4.1.4413.1.1.31.1.13
Enables or Disables the UDP Port Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceICMPMode 1.3.6.1.4.1.4413.1.1.31.1.7
Enables or Disables the ICMP Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDenialOfServiceICMPSize 1.3.6.1.4.1.4413.1.1.31.1.8
Configures the Maximum allowed ICMP data size. This is active if the ICMP Denial of Service protection feature is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..16376  

agentSwitchDenialOfServiceICMPv6Size 1.3.6.1.4.1.4413.1.1.31.1.18
Configures the Maximum allowed ICMPv6 data size. This is active if the ICMPv6 Denial of Service protection feature is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1023  

agentSwitchDenialOfServiceICMPFragMode 1.3.6.1.4.1.4413.1.1.31.1.19
Enables or Disables the ICMP Fragment Denial of Service protection feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)