F3-SYNCJACK-MIB

File: F3-SYNCJACK-MIB.mib (158193 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CM-ENTITY-MIB F3-SYNC-MIB F3-PTP-MIB
CM-COMMON-MIB ADVA-MIB

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Integer32 Unsigned32
DisplayString TruthValue RowStatus
StorageType VariablePointer MacAddress
DateAndTime TEXTUAL-CONVENTION neIndex
shelfIndex slotIndex SSMQualityLevel
ScaledNanoseconds ScheduleType SchedActivityStatus
IpVersion CmPmIntervalType CmPmBinAction
fsp150cm AdminState OperationalState
SecondaryState PerfCounter32 PerfCounter64
IpPriorityMapMode

Defined Types

SyncJackTestState  
Enumerations for Time Interval Error Test State.
TEXTUAL-CONVENTION    
  INTEGER waiting(1), running(2), completed(3), failed(4), suspended(5), notscheduled(6)  

MTIEMaskType  
Enumerations for Maximum Time Interval Error Mask.
TEXTUAL-CONVENTION    
  INTEGER g823-e1-ssu(1), g823-e1-sec(2), g823-e1-traffic(3), g823-pdh(4), g824-t1-sync(5), g824-t1-traffic(6), g8261-e1-case1(7), g8261-t1-case1(8), g8261-e1-case2(9), g8261-eec-opt1(10), g8263-const-temp(11), g8272-prtc(12), g8261-1(13), g8262-eec-opt1(14), g8262-eec-opt1-temp(15), g8262-eec-opt2(16), g8262-eec-opt1-tolerrance(17), g8263-var-temp(18), g8273-2(19), g8271-1(20)  

TIESourceType  
Enumerations for TIE Source Type.
TEXTUAL-CONVENTION    
  INTEGER phase(1), frequency(2)  

TIEMeasurementRate  
Enumerations for TIE Measurement Rate.
TEXTUAL-CONVENTION    
  INTEGER meas-10per1sec(1), meas-1per1sec(2), meas-1per2sec(3)  

PTPMeasurementDirection  
Enumerations for PTP Measurement Direction.
TEXTUAL-CONVENTION    
  INTEGER master2slave(1), slave2master(2), twoways(3), master2slave-t4(4)  

MeasurementType  
Enumerations for Measurement Type.
TEXTUAL-CONVENTION    
  INTEGER phase(1), frequency(2)  

FFOObserWindow  
Enumerations for FFO obser window.
TEXTUAL-CONVENTION    
  INTEGER window-100s(1), window-200s(2), window-500s(3), window-1000s(4), window-2000s(5), window-5000s(6), window-10000s(7)  

F3SyncJClockProbeEntry  
SEQUENCE    
  f3SyncJClockProbeIndex Integer32
  f3SyncJClockProbeName DisplayString
  f3SyncJClockProbeSource VariablePointer
  f3SyncJClockProbeReference VariablePointer
  f3SyncJClockProbeExpectedQL SSMQualityLevel
  f3SyncJClockProbeSourceType TIESourceType
  f3SyncJClockProbeMeasurementRate TIEMeasurementRate
  f3SyncJClockProbeMTIEMaskType MTIEMaskType
  f3SyncJClockProbeMTIEMaskMargin Unsigned32
  f3SyncJClockProbeScheduler VariablePointer
  f3SyncJClockProbeTestState SyncJackTestState
  f3SyncJClockProbeLastTIEResult Integer32
  f3SyncJClockProbeLastTIEResultTime DateAndTime
  f3SyncJClockProbeSourceFailure TruthValue
  f3SyncJClockProbeReferenceFailure TruthValue
  f3SyncJClockProbeActualTestStartTime DateAndTime
  f3SyncJClockProbeActualTestDuration Unsigned32
  f3SyncJClockProbeMTIEMaskCrossedTime DateAndTime
  f3SyncJClockProbeMTIEMaskMarginCrossedTime DateAndTime
  f3SyncJClockProbeStatusMTIEMaskFailed TruthValue
  f3SyncJClockProbeStatusMTIEMarginFailed TruthValue
  f3SyncJClockProbeStorageType StorageType
  f3SyncJClockProbeRowStatus RowStatus
  f3SyncJClockProbeFfoTarget Integer32
  f3SyncJClockProbeFfoObserWindow FFOObserWindow
  f3SyncJClockProbeLastFFOResult Integer32
  f3SyncJClockProbeTimeOfLastFFOResult DateAndTime
  f3SyncJClockProbeRawDataCollectionEnabled TruthValue
  f3SyncJClockProbeTeAlertThreshold Integer32
  f3SyncJClockProbeTeAlertClearThreshold Integer32
  f3SyncJClockProbeLastTEAlertTime DateAndTime
  f3SyncJClockProbeLastTEAlertClearTime DateAndTime
  f3SyncJClockProbeRunningFailedCount Integer32
  f3SyncJClockProbeMeasurementType MeasurementType
  f3SyncJClockProbeConstTEThreshold Unsigned32
  f3SyncJClockProbeConstTEClrThreshold Unsigned32
  f3SyncJClockProbeConstTEWindow Unsigned32
  f3SyncJClockProbeMaxTETotAlarmTime Unsigned32
  f3SyncJClockProbeConstTETotAlarmTime Unsigned32
  f3SyncJClockProbeConstTEMeasurementTime Unsigned32
  f3SyncJClockProbeMaxTEMeasurementTime Unsigned32
  f3SyncJClockProbeMaxTEThreshold Integer32
  f3SyncJClockProbeMaxTEClrThreshold Integer32

F3SyncJClockProbeMTIEValueEntry  
SEQUENCE    
  f3SyncJClockProbeMTIEValueIndex Integer32
  f3SyncJClockProbeMTIEValue Integer32

F3SyncJClockProbeResHistoryEntry  
SEQUENCE    
  f3SyncJClockProbeResHistoryIndex Integer32
  f3SyncJClockProbeResHistoryAlias DisplayString
  f3SyncJClockProbeResHistorySource VariablePointer
  f3SyncJClockProbeResHistoryReference VariablePointer
  f3SyncJClockProbeResHistoryExpectedQL SSMQualityLevel
  f3SyncJClockProbeResHistorySourceType TIESourceType
  f3SyncJClockProbeResHistoryMeasurementRate TIEMeasurementRate
  f3SyncJClockProbeResHistoryMTIEMaskType MTIEMaskType
  f3SyncJClockProbeResHistoryMTIEMaskMargin Unsigned32
  f3SyncJClockProbeResHistorySourceFailure TruthValue
  f3SyncJClockProbeResHistoryReferenceFailure TruthValue
  f3SyncJClockProbeResHistoryActualTestStartTime DateAndTime
  f3SyncJClockProbeResHistoryActualTestDuration Unsigned32
  f3SyncJClockProbeResHistoryMTIEMaskCrossedTime DateAndTime
  f3SyncJClockProbeResHistoryMTIEMaskMarginCrossedTime DateAndTime
  f3SyncJClockProbeResHistoryStatusMTIEMaskFailed TruthValue
  f3SyncJClockProbeResHistoryStatusMTIEMarginFailed TruthValue
  f3SyncJClockProbeResHistoryStorageType StorageType
  f3SyncJClockProbeResHistoryRowStatus RowStatus
  f3SyncJClockProbeResHistoryMinFFO Integer32
  f3SyncJClockProbeResHistoryMaxFFO Integer32
  f3SyncJClockProbeResHistoryAvgFFO Integer32
  f3SyncJClockProbeResHistoryOutOfTargetFFOTime Integer32
  f3SyncJClockProbeResHistoryTotalFFOTime Integer32
  f3SyncJClockProbeResHistoryMinPhaseOffset Integer32
  f3SyncJClockProbeResHistoryMaxPhaseOffset Integer32
  f3SyncJClockProbeResHistoryAvgPhaseOffset Integer32
  f3SyncJClockProbeResHistoryOutOfTargetPhaseOffsetTime Integer32
  f3SyncJClockProbeResHistoryTotalPhaseOffsetTime Integer32
  f3SyncJClockProbeResHistoryMeasurementType MeasurementType
  f3SyncJClockProbeResHistoryTeAlertThreshold Integer32
  f3SyncJClockProbeResHistoryTeAlertClearThreshold Integer32
  f3SyncJClockProbeResHistoryLastTEAlertTime DateAndTime
  f3SyncJClockProbeResHistoryLastTEAlertClearTime DateAndTime
  f3SyncJClockProbeResHistoryRunningFailedCount Integer32
  f3SyncJClockProbeResHistoryConstTEThreshold Unsigned32
  f3SyncJClockProbeResHistoryConstTEClrThreshold Unsigned32
  f3SyncJClockProbeResHistoryConstTEWindow Unsigned32
  f3SyncJClockProbeResHistoryMaxTETotAlarmTime Unsigned32
  f3SyncJClockProbeResHistoryConstTETotAlarmTime Unsigned32
  f3SyncJClockProbeResHistoryConstTEMeasurementTime Unsigned32
  f3SyncJClockProbeResHistoryMaxTEMeasurementTime Unsigned32
  f3SyncJClockProbeResHistoryMaxTEThreshold Integer32
  f3SyncJClockProbeResHistoryMaxTEClrThreshold Integer32

F3SyncJClockProbeResHistoryMTIEValueEntry  
SEQUENCE    
  f3SyncJClockProbeResHistoryMTIEValueIndex Integer32
  f3SyncJClockProbeResHistoryMTIEValue Integer32

F3SyncJPTPClockProbeEntry  
SEQUENCE    
  f3SyncJPTPClockProbeIndex Integer32
  f3SyncJPTPClockProbeName DisplayString
  f3SyncJPTPClockProbeMeasurementDirection PTPMeasurementDirection
  f3SyncJPTPClockProbePTPFlowPoint VariablePointer
  f3SyncJPTPClockProbeIpPrototocol IpVersion
  f3SyncJPTPClockProbeSlaveIpV4Address IpAddress
  f3SyncJPTPClockProbeMasterIpV4Address IpAddress
  f3SyncJPTPClockProbeReference VariablePointer
  f3SyncJPTPClockProbeExpectedQL SSMQualityLevel
  f3SyncJPTPClockProbeMTIEMaskType MTIEMaskType
  f3SyncJPTPClockProbeMTIEMaskMargin Unsigned32
  f3SyncJPTPClockProbeScheduler VariablePointer
  f3SyncJPTPClockProbeTestState SyncJackTestState
  f3SyncJPTPClockProbeLastTIEResult Integer32
  f3SyncJPTPClockProbeLastTIEResultTime DateAndTime
  f3SyncJPTPClockProbeNoTimestampFailure TruthValue
  f3SyncJPTPClockProbeNoEventMessageFailure TruthValue
  f3SyncJPTPClockProbeReferenceFailure TruthValue
  f3SyncJPTPClockProbeActualTestStartTime DateAndTime
  f3SyncJPTPClockProbeActualTestDuration Unsigned32
  f3SyncJPTPClockProbeMTIEMaskCrossedTime DateAndTime
  f3SyncJPTPClockProbeMTIEMaskMarginCrossedTime DateAndTime
  f3SyncJPTPClockProbeStatusMTIEMaskFailed TruthValue
  f3SyncJPTPClockProbeStatusMTIEMarginFailed TruthValue
  f3SyncJPTPClockProbeStorageType StorageType
  f3SyncJPTPClockProbeRowStatus RowStatus
  f3SyncJPTPClockProbeFfoTarget Integer32
  f3SyncJPTPClockProbeFfoObserWindow FFOObserWindow
  f3SyncJPTPClockProbeLastFFOResult Integer32
  f3SyncJPTPClockProbeTimeOfLastFFOResult DateAndTime
  f3SyncJPTPClockProbeRawDataCollectionEnabled TruthValue
  f3SyncJPTPClockProbeTeAlertThreshold Integer32
  f3SyncJPTPClockProbeTeAlertClearThreshold Integer32
  f3SyncJPTPClockProbeLastTEAlertTime DateAndTime
  f3SyncJPTPClockProbeLastTEAlertClearTime DateAndTime
  f3SyncJPTPClockProbeRunningFailedCount Integer32
  f3SyncJPTPClockProbeMeasurementType MeasurementType
  f3SyncJPTPClockProbeDelayMS Integer32
  f3SyncJPTPClockProbeDelaySM Integer32
  f3SyncJPTPClockProbeTAsymmetry Integer32
  f3SyncJPTPClockProbeDelayCompensation Integer32
  f3SyncJPTPClockProbeConstTEThreshold Unsigned32
  f3SyncJPTPClockProbeConstTEClrThreshold Unsigned32
  f3SyncJPTPClockProbeConstTEWindow Unsigned32
  f3SyncJPTPClockProbeInstTEThreshold Unsigned32
  f3SyncJPTPClockProbeInstTEClrThreshold Unsigned32
  f3SyncJPTPClockProbeMaxTETotAlarmTime Unsigned32
  f3SyncJPTPClockProbeConstTETotAlarmTime Unsigned32
  f3SyncJPTPClockProbeInstTETotAlarmTime Unsigned32
  f3SyncJPTPClockProbeSlavePortIdentity DisplayString
  f3SyncJPTPClockProbeMasterPortIdentity DisplayString
  f3SyncJPTPClockProbeConstTEMeasurementTime Unsigned32
  f3SyncJPTPClockProbeMaxTEMeasurementTime Unsigned32
  f3SyncJPTPClockProbeInstTEMeasurementTime Unsigned32
  f3SyncJPTPClockProbeMaxTEThreshold Integer32
  f3SyncJPTPClockProbeMaxTEClrThreshold Integer32

F3SyncJPTPClockProbeMTIEValueEntry  
SEQUENCE    
  f3SyncJPTPClockProbeMTIEValueIndex Integer32
  f3SyncJPTPClockProbeMTIEValue Integer32

F3SyncJPTPClockProbeResHistoryEntry  
SEQUENCE    
  f3SyncJPTPClockProbeResHistoryIndex Integer32
  f3SyncJPTPClockProbeResHistoryAlias DisplayString
  f3SyncJPTPClockProbeResHistoryMeasurementDirection PTPMeasurementDirection
  f3SyncJPTPClockProbeResHistoryPTPFlowPoint VariablePointer
  f3SyncJPTPClockProbeResHistoryIpPrototocol IpVersion
  f3SyncJPTPClockProbeResHistorySlaveIpV4Address IpAddress
  f3SyncJPTPClockProbeResHistoryMasterIpV4Address IpAddress
  f3SyncJPTPClockProbeResHistoryReference VariablePointer
  f3SyncJPTPClockProbeResHistoryExpectedQL SSMQualityLevel
  f3SyncJPTPClockProbeResHistoryMTIEMaskType MTIEMaskType
  f3SyncJPTPClockProbeResHistoryMTIEMaskMargin Unsigned32
  f3SyncJPTPClockProbeResHistoryNoTimestampFailure TruthValue
  f3SyncJPTPClockProbeResHistoryNoEventMessageFailure TruthValue
  f3SyncJPTPClockProbeResHistoryReferenceFailure TruthValue
  f3SyncJPTPClockProbeResHistoryActualTestStartTime DateAndTime
  f3SyncJPTPClockProbeResHistoryActualTestDuration Unsigned32
  f3SyncJPTPClockProbeResHistoryMTIEMaskCrossedTime DateAndTime
  f3SyncJPTPClockProbeResHistoryMTIEMaskMarginCrossedTime DateAndTime
  f3SyncJPTPClockProbeResHistoryStatusMTIEMaskFailed TruthValue
  f3SyncJPTPClockProbeResHistoryStatusMTIEMarginFailed TruthValue
  f3SyncJPTPClockProbeResHistoryStorageType StorageType
  f3SyncJPTPClockProbeResHistoryRowStatus RowStatus
  f3SyncJPTPClockProbeResHistoryMinFFO Integer32
  f3SyncJPTPClockProbeResHistoryMaxFFO Integer32
  f3SyncJPTPClockProbeResHistoryAvgFFO Integer32
  f3SyncJPTPClockProbeResHistoryOutOfTargetFFOTime Integer32
  f3SyncJPTPClockProbeResHistoryTotalFFOTime Integer32
  f3SyncJPTPClockProbeResHistoryMinPhaseOffset Integer32
  f3SyncJPTPClockProbeResHistoryMaxPhaseOffset Integer32
  f3SyncJPTPClockProbeResHistoryAvgPhaseOffset Integer32
  f3SyncJPTPClockProbeResHistoryOutOfTargetPhaseOffsetTime Integer32
  f3SyncJPTPClockProbeResHistoryTotalPhaseOffsetTime Integer32
  f3SyncJPTPClockProbeResHistoryTeAlertThreshold Integer32
  f3SyncJPTPClockProbeResHistoryTeAlertClearThreshold Integer32
  f3SyncJPTPClockProbeResHistoryLastTEAlertTime DateAndTime
  f3SyncJPTPClockProbeResHistoryLastTEAlertClearTime DateAndTime
  f3SyncJPTPClockProbeResHistoryRunningFailedCount Integer32
  f3SyncJPTPClockProbeResHistoryMeasurementType MeasurementType
  f3SyncJPTPClockProbeResHistoryConstTEThreshold Unsigned32
  f3SyncJPTPClockProbeResHistoryConstTEClrThreshold Unsigned32
  f3SyncJPTPClockProbeResHistoryConstTEWindow Unsigned32
  f3SyncJPTPClockProbeResHistoryInstTEThreshold Unsigned32
  f3SyncJPTPClockProbeResHistoryInstTEClrThreshold Unsigned32
  f3SyncJPTPClockProbeResHistoryMaxTETotAlarmTime Unsigned32
  f3SyncJPTPClockProbeResHistoryConstTETotAlarmTime Unsigned32
  f3SyncJPTPClockProbeResHistoryInstTETotAlarmTime Unsigned32
  f3SyncJPTPClockProbeResHistorySlavePortIdentity DisplayString
  f3SyncJPTPClockProbeResHistoryMasterPortIdentity DisplayString
  f3SyncJPTPClockProbeResHistoryConstTEMeasurementTime Unsigned32
  f3SyncJPTPClockProbeResHistoryMaxTEMeasurementTime Unsigned32
  f3SyncJPTPClockProbeResHistoryInstTEMeasurementTime Unsigned32
  f3SyncJPTPClockProbeResHistoryMaxTEThreshold Integer32
  f3SyncJPTPClockProbeResHistoryMaxTEClrThreshold Integer32

F3SyncJPTPClockProbeResHistoryMTIEValueEntry  
SEQUENCE    
  f3SyncJPTPClockProbeResHistoryMTIEValueIndex Integer32
  f3SyncJPTPClockProbeResHistoryMTIEValue Integer32

F3SyncJPTPNetworkProbeEntry  
SEQUENCE    
  f3SyncJPTPNetworkProbeIndex Integer32
  f3SyncJPTPNetworkProbeName DisplayString
  f3SyncJPTPNetworkProbeAdminState AdminState
  f3SyncJPTPNetworkProbeOperationalState OperationalState
  f3SyncJPTPNetworkProbeSecondaryState SecondaryState
  f3SyncJPTPNetworkProbePTPFlowPoint VariablePointer
  f3SyncJPTPNetworkProbeIpPrototocol IpVersion
  f3SyncJPTPNetworkProbeSlaveIpV4Address IpAddress
  f3SyncJPTPNetworkProbeMasterIpV4Address IpAddress
  f3SyncJPTPNetworkProbeReference VariablePointer
  f3SyncJPTPNetworkProbeExpectedQL SSMQualityLevel
  f3SyncJPTPNetworkProbeActualTestStartTime DateAndTime
  f3SyncJPTPNetworkProbeActualTestDuration Unsigned32
  f3SyncJPTPNetworkProbePDVAssuredHi Unsigned32
  f3SyncJPTPNetworkProbePDVAssuredLo Unsigned32
  f3SyncJPTPNetworkProbePDVSatisfiedHi Unsigned32
  f3SyncJPTPNetworkProbePDVSatisfiedLo Unsigned32
  f3SyncJPTPNetworkProbeResPDVFwdLowRange Unsigned32
  f3SyncJPTPNetworkProbeResPDVFwdMediumRange Unsigned32
  f3SyncJPTPNetworkProbeResPDVFwdHighRange Unsigned32
  f3SyncJPTPNetworkProbeResPDVRevLowRange Unsigned32
  f3SyncJPTPNetworkProbeResPDVRevMediumRange Unsigned32
  f3SyncJPTPNetworkProbeResPDVRevHighRange Unsigned32
  f3SyncJPTPNetworkProbeScheduler VariablePointer
  f3SyncJPTPNetworkProbeTestState SyncJackTestState
  f3SyncJPTPNetworkProbeNoTimestampFailure TruthValue
  f3SyncJPTPNetworkProbeNoEventMessageFailure TruthValue
  f3SyncJPTPNetworkProbeFwdScore Unsigned32
  f3SyncJPTPNetworkProbeRevScore Unsigned32
  f3SyncJPTPNetworkProbeReferenceFailure TruthValue
  f3SyncJPTPNetworkProbeStorageType StorageType
  f3SyncJPTPNetworkProbeRowStatus RowStatus
  f3SyncJPTPNetworkProbeResultsAvailable TruthValue

F3SyncJScheduleGroupEntry  
SEQUENCE    
  f3SyncJScheduleGroupIndex Integer32
  f3SyncJScheduleGroupDescr DisplayString
  f3SyncJScheduleGroupEntityList DisplayString
  f3SyncJScheduleGroupType ScheduleType
  f3SyncJScheduleGroupStartTime DateAndTime
  f3SyncJScheduleGroupDuration Unsigned32
  f3SyncJScheduleGroupStatus SchedActivityStatus
  f3SyncJScheduleGroupStorageType StorageType
  f3SyncJScheduleGroupRowStatus RowStatus

F3SyncJPTPNetworkProbeStatsEntry  
SEQUENCE    
  f3SyncJPTPNetworkProbeStatsIndex Integer32
  f3SyncJPTPNetworkProbeStatsIntervalType CmPmIntervalType
  f3SyncJPTPNetworkProbeStatsValid TruthValue
  f3SyncJPTPNetworkProbeStatsAction CmPmBinAction
  f3SyncJPTPNetworkProbeStatsSyncMsgsRx PerfCounter32
  f3SyncJPTPNetworkProbeStatsDelayRspMsgsRx PerfCounter32
  f3SyncJPTPNetworkProbeStatsLostSyncMsgs PerfCounter32
  f3SyncJPTPNetworkProbeStatsLostDelayRspMsgs PerfCounter32
  f3SyncJPTPNetworkProbeStatsMinMeanPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsMaxMeanPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsAvgMeanPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsMinSyncPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsMaxSyncPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsAvgSyncPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsAvgResPDVFwd ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsResPDVFwdLow Unsigned32
  f3SyncJPTPNetworkProbeStatsResPDVFwdMedium Unsigned32
  f3SyncJPTPNetworkProbeStatsResPDVFwdHigh Unsigned32
  f3SyncJPTPNetworkProbeStatsResPDVFwdTotal Unsigned32
  f3SyncJPTPNetworkProbeStatsFwdScore5 Unsigned32
  f3SyncJPTPNetworkProbeStatsFwdScore4 Unsigned32
  f3SyncJPTPNetworkProbeStatsFwdScore3 Unsigned32
  f3SyncJPTPNetworkProbeStatsAvgResPDVRev ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsResPDVRevLow Unsigned32
  f3SyncJPTPNetworkProbeStatsResPDVRevMedium Unsigned32
  f3SyncJPTPNetworkProbeStatsResPDVRevHigh Unsigned32
  f3SyncJPTPNetworkProbeStatsResPDVRevTotal Unsigned32
  f3SyncJPTPNetworkProbeStatsRevScore5 Unsigned32
  f3SyncJPTPNetworkProbeStatsRevScore4 Unsigned32
  f3SyncJPTPNetworkProbeStatsRevScore3 Unsigned32
  f3SyncJPTPNetworkProbeStatsMinRPDVFwd ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsMinRPDVRev ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsMinPathAsymmetry Unsigned32
  f3SyncJPTPNetworkProbeStatsMaxPathAsymmetry Unsigned32
  f3SyncJPTPNetworkProbeStatsAvgPathAsymmetry Unsigned32
  f3SyncJPTPNetworkProbeStatsPathLossSecondsFwd Unsigned32
  f3SyncJPTPNetworkProbeStatsPathLossSecondsRev Unsigned32
  f3SyncJPTPNetworkProbeStatsMinDelayReqPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsMaxDelayReqPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeStatsAvgDelayReqPathDelay ScaledNanoseconds

F3SyncJPTPNetworkProbeHistoryEntry  
SEQUENCE    
  f3SyncJPTPNetworkProbeHistoryIndex Integer32
  f3SyncJPTPNetworkProbeHistoryTime DateAndTime
  f3SyncJPTPNetworkProbeHistoryValid TruthValue
  f3SyncJPTPNetworkProbeHistoryAction CmPmBinAction
  f3SyncJPTPNetworkProbeHistorySyncMsgsRx PerfCounter32
  f3SyncJPTPNetworkProbeHistoryDelayRspMsgsRx PerfCounter32
  f3SyncJPTPNetworkProbeHistoryLostSyncMsgs PerfCounter32
  f3SyncJPTPNetworkProbeHistoryLostDelayRspMsgs PerfCounter32
  f3SyncJPTPNetworkProbeHistoryMinMeanPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryMaxMeanPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryAvgMeanPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryMinSyncPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryMaxSyncPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryAvgSyncPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryAvgResPDVFwd ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryResPDVFwdLow Unsigned32
  f3SyncJPTPNetworkProbeHistoryResPDVFwdMedium Unsigned32
  f3SyncJPTPNetworkProbeHistoryResPDVFwdHigh Unsigned32
  f3SyncJPTPNetworkProbeHistoryResPDVFwdTotal Unsigned32
  f3SyncJPTPNetworkProbeHistoryFwdScore5 Unsigned32
  f3SyncJPTPNetworkProbeHistoryFwdScore4 Unsigned32
  f3SyncJPTPNetworkProbeHistoryFwdScore3 Unsigned32
  f3SyncJPTPNetworkProbeHistoryAvgResPDVRev ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryResPDVRevLow Unsigned32
  f3SyncJPTPNetworkProbeHistoryResPDVRevMedium Unsigned32
  f3SyncJPTPNetworkProbeHistoryResPDVRevHigh Unsigned32
  f3SyncJPTPNetworkProbeHistoryResPDVRevTotal Unsigned32
  f3SyncJPTPNetworkProbeHistoryRevScore5 Unsigned32
  f3SyncJPTPNetworkProbeHistoryRevScore4 Unsigned32
  f3SyncJPTPNetworkProbeHistoryRevScore3 Unsigned32
  f3SyncJPTPNetworkProbeHistoryMinRPDVFwd ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryMinRPDVRev ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryMinPathAsymmetry Unsigned32
  f3SyncJPTPNetworkProbeHistoryMaxPathAsymmetry Unsigned32
  f3SyncJPTPNetworkProbeHistoryAvgPathAsymmetry Unsigned32
  f3SyncJPTPNetworkProbeHistoryMinDelayReqPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryMaxDelayReqPathDelay ScaledNanoseconds
  f3SyncJPTPNetworkProbeHistoryAvgDelayReqPathDelay ScaledNanoseconds

F3SyncJPTPNetworkProbeThresholdEntry  
SEQUENCE    
  f3SyncJPTPNetworkProbeThresholdIndex Integer32
  f3SyncJPTPNetworkProbeThresholdInterval CmPmIntervalType
  f3SyncJPTPNetworkProbeThresholdVariable VariablePointer
  f3SyncJPTPNetworkProbeThresholdValueLo Unsigned32
  f3SyncJPTPNetworkProbeThresholdValueHi Unsigned32
  f3SyncJPTPNetworkProbeThresholdMonValue PerfCounter64

Defined Values

f3SyncJMIB 1.3.6.1.4.1.2544.1.12.22
This module defines the Sync Jack MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
MODULE-IDENTITY    

f3SyncJConfigObjects 1.3.6.1.4.1.2544.1.12.22.1
OBJECT IDENTIFIER    

f3SyncJPerformanceObjects 1.3.6.1.4.1.2544.1.12.22.2
OBJECT IDENTIFIER    

f3SyncJNotifications 1.3.6.1.4.1.2544.1.12.22.3
OBJECT IDENTIFIER    

f3SyncJConformance 1.3.6.1.4.1.2544.1.12.22.4
OBJECT IDENTIFIER    

f3SyncJClockProbeTable 1.3.6.1.4.1.2544.1.12.22.1.1
A list of entries corresponding to the SyncJack Clock Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJClockProbeEntry

f3SyncJClockProbeEntry 1.3.6.1.4.1.2544.1.12.22.1.1.1
An entry containing information applicable to a particular SyncJack Clock Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJClockProbeEntry  

f3SyncJClockProbeIndex 1.3.6.1.4.1.2544.1.12.22.1.1.1.1
Unique index value associated with the Clock Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeName 1.3.6.1.4.1.2544.1.12.22.1.1.1.2
This object allows SNMP management entities to provide a name to the Clock Probe entity.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

f3SyncJClockProbeSource 1.3.6.1.4.1.2544.1.12.22.1.1.1.3
This object allows setting up of the TIE Source Entity. Clock Probe compares this with the f3SyncJClockProbeReference and computes TIE, MTIE.
Status: current Access: read-write
OBJECT-TYPE    
  VariablePointer  

f3SyncJClockProbeReference 1.3.6.1.4.1.2544.1.12.22.1.1.1.4
This object allows setting up of the TIE Reference Entity. Clock Probe compares this with the f3SyncJClockProbeSource and computes TIE, MTIE.
Status: current Access: read-write
OBJECT-TYPE    
  VariablePointer  

f3SyncJClockProbeExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.1.1.5
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
Status: current Access: read-write
OBJECT-TYPE    
  SSMQualityLevel  

f3SyncJClockProbeSourceType 1.3.6.1.4.1.2544.1.12.22.1.1.1.6
This object represents the Clock Probe source type.
Status: current Access: read-create
OBJECT-TYPE    
  TIESourceType  

f3SyncJClockProbeMeasurementRate 1.3.6.1.4.1.2544.1.12.22.1.1.1.7
This object represents the actual Clock Probe measurement rate.
Status: current Access: read-only
OBJECT-TYPE    
  TIEMeasurementRate  

f3SyncJClockProbeMTIEMaskType 1.3.6.1.4.1.2544.1.12.22.1.1.1.8
This object represents the MTIE Mask Type.
Status: current Access: read-write
OBJECT-TYPE    
  MTIEMaskType  

f3SyncJClockProbeMTIEMaskMargin 1.3.6.1.4.1.2544.1.12.22.1.1.1.9
This object specifies the MTIE Mask Margin in percentage below the MTIE mask for alarm report. Value of 0 means no margin.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeScheduler 1.3.6.1.4.1.2544.1.12.22.1.1.1.10
This object provides the associated scheduler instance, if one exists, with this Clock Probe. This value is 0.0, if there is no scheduler associated with the Clock Probe.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

f3SyncJClockProbeTestState 1.3.6.1.4.1.2544.1.12.22.1.1.1.11
This object provides the Clock Probe test state.
Status: current Access: read-only
OBJECT-TYPE    
  SyncJackTestState  

f3SyncJClockProbeLastTIEResult 1.3.6.1.4.1.2544.1.12.22.1.1.1.12
This object provides last TIE result in nanoseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeLastTIEResultTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.13
This object provides the time associated with the last TIE result.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeSourceFailure 1.3.6.1.4.1.2544.1.12.22.1.1.1.14
This object provides information on whether the source failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJClockProbeReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.1.1.15
This object provides information on whether the reference failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJClockProbeActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.16
This object provides information on the actual test start time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.1.1.17
This object provides information on the actual test duration in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeMTIEMaskCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.18
This object provides the time when the MTIE mask was crossed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeMTIEMaskMarginCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.19
This object provides the time when the MTIE mask margin was crossed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeStatusMTIEMaskFailed 1.3.6.1.4.1.2544.1.12.22.1.1.1.20
This object provides the result status, whether MTIE Mask has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJClockProbeStatusMTIEMarginFailed 1.3.6.1.4.1.2544.1.12.22.1.1.1.21
This object provides the result status, whether MTIE Margin has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJClockProbeStorageType 1.3.6.1.4.1.2544.1.12.22.1.1.1.22
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

f3SyncJClockProbeRowStatus 1.3.6.1.4.1.2544.1.12.22.1.1.1.23
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJClockProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJClockProbeRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJClockProbeRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

f3SyncJClockProbeFfoTarget 1.3.6.1.4.1.2544.1.12.22.1.1.1.24
The FFO target for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeFfoObserWindow 1.3.6.1.4.1.2544.1.12.22.1.1.1.25
The FFO obserwer window for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  FFOObserWindow  

f3SyncJClockProbeLastFFOResult 1.3.6.1.4.1.2544.1.12.22.1.1.1.26
The last FFO result for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeTimeOfLastFFOResult 1.3.6.1.4.1.2544.1.12.22.1.1.1.27
The time of last FFO result for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeRawDataCollectionEnabled 1.3.6.1.4.1.2544.1.12.22.1.1.1.28
The raw data collection enabled for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

f3SyncJClockProbeTeAlertThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.29
The TE alert threshold configured for this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeTeAlertClearThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.30
The TE alert clear threshold configured for this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeLastTEAlertTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.31
The last TE alert time for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeLastTEAlertClearTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.32
The last TE alert clear time for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeRunningFailedCount 1.3.6.1.4.1.2544.1.12.22.1.1.1.33
The running failed count for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeMeasurementType 1.3.6.1.4.1.2544.1.12.22.1.1.1.34
The measurement type configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  MeasurementType  

f3SyncJClockProbeConstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.35
The Constant Time Error Alert threshold (ns).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeConstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.36
The Constant Time Error Alert Clear threshold (ns).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeConstTEWindow 1.3.6.1.4.1.2544.1.12.22.1.1.1.37
The Averaging window used for Constant TE calculation (sec).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeMaxTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.38
The Total time in seconds Max TE has been measured
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeConstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.39
The Total time in seconds Constant TE has been measured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeConstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.40
The Const TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeMaxTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.1.1.41
The Max TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeMaxTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.42
The TE Max threshold configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeMaxTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.1.1.43
The TE Max clear threshold configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeMTIEValueTable 1.3.6.1.4.1.2544.1.12.22.1.2
A list of entries corresponding to the Clock Probe's MTIE Result Values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJClockProbeMTIEValueEntry

f3SyncJClockProbeMTIEValueEntry 1.3.6.1.4.1.2544.1.12.22.1.2.1
An entry containing information applicable to a particular Clock Probe's MTIE Result Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJClockProbeMTIEValueEntry  

f3SyncJClockProbeMTIEValueIndex 1.3.6.1.4.1.2544.1.12.22.1.2.1.1
Unique index value associated with the Clock Probe Result Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeMTIEValue 1.3.6.1.4.1.2544.1.12.22.1.2.1.2
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryTable 1.3.6.1.4.1.2544.1.12.22.1.3
A list of entries corresponding to the SyncJack Clock Probe Result History.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJClockProbeResHistoryEntry

f3SyncJClockProbeResHistoryEntry 1.3.6.1.4.1.2544.1.12.22.1.3.1
An entry containing information applicable to a particular SyncJack Clock Probe Result History.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJClockProbeResHistoryEntry  

f3SyncJClockProbeResHistoryIndex 1.3.6.1.4.1.2544.1.12.22.1.3.1.1
Unique index value associated with the Clock Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryAlias 1.3.6.1.4.1.2544.1.12.22.1.3.1.2
This object provides alias of the Clock Probe result history.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..256)  

f3SyncJClockProbeResHistorySource 1.3.6.1.4.1.2544.1.12.22.1.3.1.3
This object provides the source for TIE computation.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

f3SyncJClockProbeResHistoryReference 1.3.6.1.4.1.2544.1.12.22.1.3.1.4
This object provides the reference for TIE computation.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

f3SyncJClockProbeResHistoryExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.3.1.5
This object provides the minimum expected Quality Level when bits-in and sync-e PHY are references.
Status: current Access: read-only
OBJECT-TYPE    
  SSMQualityLevel  

f3SyncJClockProbeResHistorySourceType 1.3.6.1.4.1.2544.1.12.22.1.3.1.6
This object provides the Clock Probe source type.
Status: current Access: read-only
OBJECT-TYPE    
  TIESourceType  

f3SyncJClockProbeResHistoryMeasurementRate 1.3.6.1.4.1.2544.1.12.22.1.3.1.7
This object provides the actual Clock Probe measurement rate.
Status: current Access: read-only
OBJECT-TYPE    
  TIEMeasurementRate  

f3SyncJClockProbeResHistoryMTIEMaskType 1.3.6.1.4.1.2544.1.12.22.1.3.1.8
This object provides the MTIE Mask Type.
Status: current Access: read-only
OBJECT-TYPE    
  MTIEMaskType  

f3SyncJClockProbeResHistoryMTIEMaskMargin 1.3.6.1.4.1.2544.1.12.22.1.3.1.9
This object provides the MTIE Mask Margin.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeResHistorySourceFailure 1.3.6.1.4.1.2544.1.12.22.1.3.1.10
This object provides information on whether the source failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJClockProbeResHistoryReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.3.1.11
This object provides information on whether the reference failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJClockProbeResHistoryActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.12
This object provides information on the actual test start time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeResHistoryActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.3.1.13
This object provides information on the actual test duration in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeResHistoryMTIEMaskCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.14
This object provides the time when the MTIE mask was crossed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeResHistoryMTIEMaskMarginCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.15
This object provides the time when the MTIE mask margin was crossed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeResHistoryStatusMTIEMaskFailed 1.3.6.1.4.1.2544.1.12.22.1.3.1.16
This object provides the result status, whether MTIE Mask has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJClockProbeResHistoryStatusMTIEMarginFailed 1.3.6.1.4.1.2544.1.12.22.1.3.1.17
This object provides the result status, whether MTIE Margin has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJClockProbeResHistoryStorageType 1.3.6.1.4.1.2544.1.12.22.1.3.1.18
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

f3SyncJClockProbeResHistoryRowStatus 1.3.6.1.4.1.2544.1.12.22.1.3.1.19
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJClockProbeResHistoryRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJClockProbeResHistoryRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJClockProbeResHistoryRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

f3SyncJClockProbeResHistoryMinFFO 1.3.6.1.4.1.2544.1.12.22.1.3.1.20
The Min FFO configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryMaxFFO 1.3.6.1.4.1.2544.1.12.22.1.3.1.21
The Max FFO configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryAvgFFO 1.3.6.1.4.1.2544.1.12.22.1.3.1.22
The average FFO configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryOutOfTargetFFOTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.23
The out of target FFO time configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryTotalFFOTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.24
The total FFO time configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryMinPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.3.1.25
The Min phase offset configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryMaxPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.3.1.26
The Max phase offset configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryAvgPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.3.1.27
The average phase offset configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryOutOfTargetPhaseOffsetTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.28
The out of target phase offset time configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryTotalPhaseOffsetTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.29
The total phase offset time configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryMeasurementType 1.3.6.1.4.1.2544.1.12.22.1.3.1.30
The measurement type configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  MeasurementType  

f3SyncJClockProbeResHistoryTeAlertThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.31
The TE alert threshold configured for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryTeAlertClearThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.32
The TE alert clear threshold configured for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryLastTEAlertTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.33
The last TE alert time for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeResHistoryLastTEAlertClearTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.34
The last TE alert clear time for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJClockProbeResHistoryRunningFailedCount 1.3.6.1.4.1.2544.1.12.22.1.3.1.35
The running failed count for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryConstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.36
The Constant Time Error Alert threshold (ns).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeResHistoryConstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.37
The Constant Time Error Alert Clear threshold (ns).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeResHistoryConstTEWindow 1.3.6.1.4.1.2544.1.12.22.1.3.1.38
The Averaging window used for Constant TE calculation (sec).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeResHistoryMaxTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.39
The Total time in seconds Max TE has been measured
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeResHistoryConstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.40
The Total time in seconds Constant TE has been measured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeResHistoryConstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.41
The Const TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeResHistoryMaxTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.3.1.42
The Max TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJClockProbeResHistoryMaxTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.43
The TE Max threshold configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryMaxTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.3.1.44
The TE Max clear threshold configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryMTIEValueTable 1.3.6.1.4.1.2544.1.12.22.1.4
A list of histgory entries corresponding to the Clock Probe's MTIE Result Values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJClockProbeResHistoryMTIEValueEntry

f3SyncJClockProbeResHistoryMTIEValueEntry 1.3.6.1.4.1.2544.1.12.22.1.4.1
An entry containing information applicable to a particular Clock Probe's MTIE Result Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJClockProbeResHistoryMTIEValueEntry  

f3SyncJClockProbeResHistoryMTIEValueIndex 1.3.6.1.4.1.2544.1.12.22.1.4.1.1
Unique index value associated with the Clock Probe History Result Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJClockProbeResHistoryMTIEValue 1.3.6.1.4.1.2544.1.12.22.1.4.1.2
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeTable 1.3.6.1.4.1.2544.1.12.22.1.5
A list of entries corresponding to the SyncJack PTP Clock Probes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJPTPClockProbeEntry

f3SyncJPTPClockProbeEntry 1.3.6.1.4.1.2544.1.12.22.1.5.1
An entry containing information applicable to a particular SyncJack PTP Clock Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJPTPClockProbeEntry  

f3SyncJPTPClockProbeIndex 1.3.6.1.4.1.2544.1.12.22.1.5.1.1
Unique index value associated with the PTP Clock Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeName 1.3.6.1.4.1.2544.1.12.22.1.5.1.2
This object allows SNMP management entities to provide an name to the PTP Clock Probe entity. This is used for creation of the underlying IP Interface associated with the PTP Clock Probe entity.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..16)  

f3SyncJPTPClockProbeMeasurementDirection 1.3.6.1.4.1.2544.1.12.22.1.5.1.3
This object allows SNMP management entities to specify the Measurement Direction to the PTP Clock Probe entity.
Status: current Access: read-write
OBJECT-TYPE    
  PTPMeasurementDirection  

f3SyncJPTPClockProbePTPFlowPoint 1.3.6.1.4.1.2544.1.12.22.1.5.1.4
This object allows SNMP management entities to specify the PTP Flow Point to use as source for PTP Clock Probe measurements.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

f3SyncJPTPClockProbeIpPrototocol 1.3.6.1.4.1.2544.1.12.22.1.5.1.5
This object allows SNMP management entities to specify the IP Protocol used for PTP communication.
Status: current Access: read-write
OBJECT-TYPE    
  IpVersion  

f3SyncJPTPClockProbeSlaveIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.5.1.6
This object allows SNMP management entities to specify the Slave IP Address associated with the PTP Clock Probe.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

f3SyncJPTPClockProbeMasterIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.5.1.7
This object allows SNMP management entities to specify the Master IP Address associated with the PTP Clock Probe.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

f3SyncJPTPClockProbeReference 1.3.6.1.4.1.2544.1.12.22.1.5.1.8
This object allows setting up of the PTP Clock Probe TIE Reference Entity. PTP Clock Probe compares this with the PTP Master/Slave entity configured using f3SyncJPTPClockProbeMasterIpV4Address/f3SyncJPTPClockProbeSlaveIpV4Address and computes TIE, MTIE.
Status: current Access: read-write
OBJECT-TYPE    
  VariablePointer  

f3SyncJPTPClockProbeExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.5.1.9
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
Status: current Access: read-write
OBJECT-TYPE    
  SSMQualityLevel  

f3SyncJPTPClockProbeMTIEMaskType 1.3.6.1.4.1.2544.1.12.22.1.5.1.10
This object represents the MTIE Mask Type.
Status: current Access: read-write
OBJECT-TYPE    
  MTIEMaskType  

f3SyncJPTPClockProbeMTIEMaskMargin 1.3.6.1.4.1.2544.1.12.22.1.5.1.11
This object represents the MTIE Mask Margin.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeScheduler 1.3.6.1.4.1.2544.1.12.22.1.5.1.12
This object provides the associated scheduler instance, if one exists, with this PTP Clock Probe. This value is 0.0, if there is no scheduler associated with the PTP Clock Probe.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

f3SyncJPTPClockProbeTestState 1.3.6.1.4.1.2544.1.12.22.1.5.1.13
This object provides the PTP Clock Probe test state.
Status: current Access: read-only
OBJECT-TYPE    
  SyncJackTestState  

f3SyncJPTPClockProbeLastTIEResult 1.3.6.1.4.1.2544.1.12.22.1.5.1.14
This object provides last TIE result in nanoseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeLastTIEResultTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.15
This object provides the time associated with the last TIE result.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeNoTimestampFailure 1.3.6.1.4.1.2544.1.12.22.1.5.1.16
This object provides information on whether the measured PTP source indicated a no-timestamp failure.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeNoEventMessageFailure 1.3.6.1.4.1.2544.1.12.22.1.5.1.17
This object provides information on whether the measured PTP source indicated a no-event message failure.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.5.1.18
This object provides information on whether the reference failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.19
This object provides information on the actual test start time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.5.1.20
This object provides information on the actual test duration in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeMTIEMaskCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.21
This object provides the time when the MTIE mask was crossed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeMTIEMaskMarginCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.22
This object provides the time when the MTIE mask margin was crossed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeStatusMTIEMaskFailed 1.3.6.1.4.1.2544.1.12.22.1.5.1.23
This object provides the result status, whether MTIE Mask has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeStatusMTIEMarginFailed 1.3.6.1.4.1.2544.1.12.22.1.5.1.24
This object provides the result status, whether MTIE Margin has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeStorageType 1.3.6.1.4.1.2544.1.12.22.1.5.1.25
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

f3SyncJPTPClockProbeRowStatus 1.3.6.1.4.1.2544.1.12.22.1.5.1.26
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJPTPClockProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJPTPClockProbeRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJPTPClockProbeRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

f3SyncJPTPClockProbeFfoTarget 1.3.6.1.4.1.2544.1.12.22.1.5.1.27
The FFO target for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeFfoObserWindow 1.3.6.1.4.1.2544.1.12.22.1.5.1.28
The FFO obserwer window for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  FFOObserWindow  

f3SyncJPTPClockProbeLastFFOResult 1.3.6.1.4.1.2544.1.12.22.1.5.1.29
The last FFO result for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeTimeOfLastFFOResult 1.3.6.1.4.1.2544.1.12.22.1.5.1.30
The time of last FFO result for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeRawDataCollectionEnabled 1.3.6.1.4.1.2544.1.12.22.1.5.1.31
The raw data collection enabled for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeTeAlertThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.32
The TE alert threshold configured for this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeTeAlertClearThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.33
The TE alert clear threshold configured for this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeLastTEAlertTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.34
The last TE alert time for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeLastTEAlertClearTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.35
The last TE alert clear time for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeRunningFailedCount 1.3.6.1.4.1.2544.1.12.22.1.5.1.36
The running failed count for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeMeasurementType 1.3.6.1.4.1.2544.1.12.22.1.5.1.37
The measurement type configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  MeasurementType  

f3SyncJPTPClockProbeDelayMS 1.3.6.1.4.1.2544.1.12.22.1.5.1.38
The delay MS for this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeDelaySM 1.3.6.1.4.1.2544.1.12.22.1.5.1.39
The delay SM for this entry.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeTAsymmetry 1.3.6.1.4.1.2544.1.12.22.1.5.1.40
The Slave to Master Delay Asymmetry configured for this entity.
Status: deprecated Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeDelayCompensation 1.3.6.1.4.1.2544.1.12.22.1.5.1.41
The Delay Compensation configured for this entity.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeConstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.42
The Constant Time Error Alert threshold (ns).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeConstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.43
The Constant Time Error Alert Clear threshold (ns).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeConstTEWindow 1.3.6.1.4.1.2544.1.12.22.1.5.1.44
The Averaging window used for Constant TE calculation (sec).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeInstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.45
The Instant Time Error Alert threshold (ns).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeInstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.46
The Instant Time Error Alert Clear threshold (ns).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeMaxTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.47
The Total time in seconds Max TE has been measured
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeConstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.48
The Total time in seconds Constant TE has been measured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeInstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.49
The Total time in seconds Instant TE has been measured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeSlavePortIdentity 1.3.6.1.4.1.2544.1.12.22.1.5.1.50
The Tested Slave Port Identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..20)  

f3SyncJPTPClockProbeMasterPortIdentity 1.3.6.1.4.1.2544.1.12.22.1.5.1.51
The Tested Master Port Identity.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..20)  

f3SyncJPTPClockProbeConstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.52
The Const TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeMaxTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.53
The Max TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeInstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.5.1.54
The Inst TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeMaxTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.55
The TE Max threshold configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeMaxTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.5.1.56
The TE Max clear threshold configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeMTIEValueTable 1.3.6.1.4.1.2544.1.12.22.1.6
A list of entries corresponding to the PTP Clock Probe's MTIE Result Values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJPTPClockProbeMTIEValueEntry

f3SyncJPTPClockProbeMTIEValueEntry 1.3.6.1.4.1.2544.1.12.22.1.6.1
An entry containing information applicable to a particular PTP Clock Probe's MTIE Result Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJPTPClockProbeMTIEValueEntry  

f3SyncJPTPClockProbeMTIEValueIndex 1.3.6.1.4.1.2544.1.12.22.1.6.1.1
Unique index value associated with the PTP Clock Probe Result Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeMTIEValue 1.3.6.1.4.1.2544.1.12.22.1.6.1.2
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryTable 1.3.6.1.4.1.2544.1.12.22.1.7
A list of entries corresponding to the SyncJack PTP Clock Probe Result History.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJPTPClockProbeResHistoryEntry

f3SyncJPTPClockProbeResHistoryEntry 1.3.6.1.4.1.2544.1.12.22.1.7.1
An entry containing information applicable to a particular SyncJack PTP Clock Probe Result History.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJPTPClockProbeResHistoryEntry  

f3SyncJPTPClockProbeResHistoryIndex 1.3.6.1.4.1.2544.1.12.22.1.7.1.1
Unique index value associated with the PTP Clock Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryAlias 1.3.6.1.4.1.2544.1.12.22.1.7.1.2
This object provides alias of the PTP Clock Probe result history.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..256)  

f3SyncJPTPClockProbeResHistoryMeasurementDirection 1.3.6.1.4.1.2544.1.12.22.1.7.1.3
This object specifies the Measurement Direction to the PTP Clock Probe entity.
Status: current Access: read-only
OBJECT-TYPE    
  PTPMeasurementDirection  

f3SyncJPTPClockProbeResHistoryPTPFlowPoint 1.3.6.1.4.1.2544.1.12.22.1.7.1.4
This object indicates the PTP Flow Point used as source for PTP Clock Probe measurements.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

f3SyncJPTPClockProbeResHistoryIpPrototocol 1.3.6.1.4.1.2544.1.12.22.1.7.1.5
This object indicates the IP Protocol used for PTP communication.
Status: current Access: read-only
OBJECT-TYPE    
  IpVersion  

f3SyncJPTPClockProbeResHistorySlaveIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.7.1.6
This object indicates the Slave IP Address associated with the PTP Clock Probe.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

f3SyncJPTPClockProbeResHistoryMasterIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.7.1.7
This object indicates the Master IP Address associated with the PTP Clock Probe.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

f3SyncJPTPClockProbeResHistoryReference 1.3.6.1.4.1.2544.1.12.22.1.7.1.8
This object indicates the PTP Clock Probe PTP Clock Probe Entity. PTP Clock Probe compares this with the PTP Master/Slave entity configured using f3SyncJPTPClockProbeMasterIpV4Address/f3SyncJPTPClockProbeSlaveIpV4Address and computes TIE, MTIE.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

f3SyncJPTPClockProbeResHistoryExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.7.1.9
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
Status: current Access: read-only
OBJECT-TYPE    
  SSMQualityLevel  

f3SyncJPTPClockProbeResHistoryMTIEMaskType 1.3.6.1.4.1.2544.1.12.22.1.7.1.10
This object represents the MTIE Mask Type.
Status: current Access: read-only
OBJECT-TYPE    
  MTIEMaskType  

f3SyncJPTPClockProbeResHistoryMTIEMaskMargin 1.3.6.1.4.1.2544.1.12.22.1.7.1.11
This object represents the MTIE Mask Margin.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryNoTimestampFailure 1.3.6.1.4.1.2544.1.12.22.1.7.1.12
This object provides information on whether the measured PTP source indicated a no-timestamp failure.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeResHistoryNoEventMessageFailure 1.3.6.1.4.1.2544.1.12.22.1.7.1.13
This object provides information on whether the measured PTP source indicated a no-event message failure.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeResHistoryReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.7.1.14
This object provides information on whether the reference failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeResHistoryActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.15
This object provides the time when the actual test was started.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeResHistoryActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.7.1.16
This object provides information on the actual test duration in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryMTIEMaskCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.17
This object provides the time when the MTIE mask was crossed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeResHistoryMTIEMaskMarginCrossedTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.18
This object provides the time when the MTIE mask margin was crossed.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeResHistoryStatusMTIEMaskFailed 1.3.6.1.4.1.2544.1.12.22.1.7.1.19
This object provides the result status, whether MTIE Mask has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeResHistoryStatusMTIEMarginFailed 1.3.6.1.4.1.2544.1.12.22.1.7.1.20
This object provides the result status, whether MTIE Margin has failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPClockProbeResHistoryStorageType 1.3.6.1.4.1.2544.1.12.22.1.7.1.21
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

f3SyncJPTPClockProbeResHistoryRowStatus 1.3.6.1.4.1.2544.1.12.22.1.7.1.22
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJPTPClockProbeResHistoryRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJPTPClockProbeResHistoryRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJPTPClockProbeResHistoryRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

f3SyncJPTPClockProbeResHistoryMinFFO 1.3.6.1.4.1.2544.1.12.22.1.7.1.23
The Min FFO configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryMaxFFO 1.3.6.1.4.1.2544.1.12.22.1.7.1.24
The Max FFO configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryAvgFFO 1.3.6.1.4.1.2544.1.12.22.1.7.1.25
The average FFO configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryOutOfTargetFFOTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.26
The out of target FFO time configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryTotalFFOTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.27
The total FFO time configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryMinPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.7.1.28
The Min phase offset configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryMaxPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.7.1.29
The Max phase offset configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryAvgPhaseOffset 1.3.6.1.4.1.2544.1.12.22.1.7.1.30
The average phase offset configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryOutOfTargetPhaseOffsetTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.31
The out of target phase offset time configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryTotalPhaseOffsetTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.32
The total phase offset time configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryTeAlertThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.33
The TE alert threshold configured for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryTeAlertClearThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.34
The TE alert clear threshold configured for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryLastTEAlertTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.35
The last TE alert time for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeResHistoryLastTEAlertClearTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.36
The last TE alert clear time for this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPClockProbeResHistoryRunningFailedCount 1.3.6.1.4.1.2544.1.12.22.1.7.1.37
The running failed count for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryMeasurementType 1.3.6.1.4.1.2544.1.12.22.1.7.1.38
The measurement type configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  MeasurementType  

f3SyncJPTPClockProbeResHistoryConstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.39
The Constant Time Error Alert threshold (ns).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryConstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.40
The Constant Time Error Alert Clear threshold (ns).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryConstTEWindow 1.3.6.1.4.1.2544.1.12.22.1.7.1.41
The Averaging window used for Constant TE calculation (sec).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryInstTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.42
The Instant Time Error Alert threshold (ns).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryInstTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.43
The Instant Time Error Alert Clear threshold (ns).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryMaxTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.44
The Total time in seconds Max TE has been measured
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryConstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.45
The Total time in seconds Constant TE has been measured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryInstTETotAlarmTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.46
The Total time in seconds Instant TE has been measured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistorySlavePortIdentity 1.3.6.1.4.1.2544.1.12.22.1.7.1.47
The Tested Slave Port Identity.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..20)  

f3SyncJPTPClockProbeResHistoryMasterPortIdentity 1.3.6.1.4.1.2544.1.12.22.1.7.1.48
The Tested Master Port Identity.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..20)  

f3SyncJPTPClockProbeResHistoryConstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.49
The Const TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryMaxTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.50
The Max TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryInstTEMeasurementTime 1.3.6.1.4.1.2544.1.12.22.1.7.1.51
The Inst TE Measurement Time for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPClockProbeResHistoryMaxTEThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.52
The TE Max threshold configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryMaxTEClrThreshold 1.3.6.1.4.1.2544.1.12.22.1.7.1.53
The TE Max clear threshold configured for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryMTIEValueTable 1.3.6.1.4.1.2544.1.12.22.1.8
A list of histgory entries corresponding to the PTP Clock Probe's MTIE Result Values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJPTPClockProbeResHistoryMTIEValueEntry

f3SyncJPTPClockProbeResHistoryMTIEValueEntry 1.3.6.1.4.1.2544.1.12.22.1.8.1
An entry containing information applicable to a particular PTP Clock Probe's MTIE Result Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJPTPClockProbeResHistoryMTIEValueEntry  

f3SyncJPTPClockProbeResHistoryMTIEValueIndex 1.3.6.1.4.1.2544.1.12.22.1.8.1.1
Unique index value associated with the PTP Clock Probe History Result Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJPTPClockProbeResHistoryMTIEValue 1.3.6.1.4.1.2544.1.12.22.1.8.1.2
This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3SyncJPTPNetworkProbeTable 1.3.6.1.4.1.2544.1.12.22.1.9
A list of entries corresponding to the SyncJack PTP Network Probes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJPTPNetworkProbeEntry

f3SyncJPTPNetworkProbeEntry 1.3.6.1.4.1.2544.1.12.22.1.9.1
An entry containing information applicable to a particular SyncJack PTP Network Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJPTPNetworkProbeEntry  

f3SyncJPTPNetworkProbeIndex 1.3.6.1.4.1.2544.1.12.22.1.9.1.1
Unique index value associated with the PTP Network Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJPTPNetworkProbeName 1.3.6.1.4.1.2544.1.12.22.1.9.1.2
This object allows SNMP management entities to provide a name to the PTP Network Probe entity.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

f3SyncJPTPNetworkProbeAdminState 1.3.6.1.4.1.2544.1.12.22.1.9.1.3
This object represents the Administrative State of the PTP Network Probe. This is not externally managed.
Status: current Access: read-only
OBJECT-TYPE    
  AdminState  

f3SyncJPTPNetworkProbeOperationalState 1.3.6.1.4.1.2544.1.12.22.1.9.1.4
This object represents the Operational State of the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  OperationalState  

f3SyncJPTPNetworkProbeSecondaryState 1.3.6.1.4.1.2544.1.12.22.1.9.1.5
This object represents the Secondary State of the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  SecondaryState  

f3SyncJPTPNetworkProbePTPFlowPoint 1.3.6.1.4.1.2544.1.12.22.1.9.1.6
This object allows SNMP management entities to specify the PTP Flow Point to use as source for PTP Network Probe measurements.
Status: current Access: read-create
OBJECT-TYPE    
  VariablePointer  

f3SyncJPTPNetworkProbeIpPrototocol 1.3.6.1.4.1.2544.1.12.22.1.9.1.7
This object allows SNMP management entities to specify the IP Protocol used for PTP communication.
Status: current Access: read-write
OBJECT-TYPE    
  IpVersion  

f3SyncJPTPNetworkProbeSlaveIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.9.1.8
This object allows SNMP management entities to specify the Slave IP Address associated with the PTP Network Probe.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

f3SyncJPTPNetworkProbeMasterIpV4Address 1.3.6.1.4.1.2544.1.12.22.1.9.1.9
This object allows SNMP management entities to specify the Master IP Address associated with the PTP Network Probe.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

f3SyncJPTPNetworkProbeReference 1.3.6.1.4.1.2544.1.12.22.1.9.1.10
This object allows setting up of the PTP Network Probe Reference Entity.
Status: current Access: read-write
OBJECT-TYPE    
  VariablePointer  

f3SyncJPTPNetworkProbeExpectedQL 1.3.6.1.4.1.2544.1.12.22.1.9.1.11
This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references.
Status: current Access: read-write
OBJECT-TYPE    
  SSMQualityLevel  

f3SyncJPTPNetworkProbeActualTestStartTime 1.3.6.1.4.1.2544.1.12.22.1.9.1.12
This object provides information on the actual test start time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPNetworkProbeActualTestDuration 1.3.6.1.4.1.2544.1.12.22.1.9.1.13
This object provides information on the actual test duration in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbePDVAssuredHi 1.3.6.1.4.1.2544.1.12.22.1.9.1.14
This object allows configuration of the higher order 32 bits of the assured level packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbePDVAssuredLo 1.3.6.1.4.1.2544.1.12.22.1.9.1.15
This object allows configuration of the lower order 32 bits of the assured level packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbePDVSatisfiedHi 1.3.6.1.4.1.2544.1.12.22.1.9.1.16
This object allows configuration of the higher order 32 bits of the satisfied level of packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbePDVSatisfiedLo 1.3.6.1.4.1.2544.1.12.22.1.9.1.17
This object allows configuration of the lower order 32 bits of the satisfied level of packet delay variation network limit for the PTP Network Probe, in nanoseconds. This helps in computing the network usability score.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeResPDVFwdLowRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.18
This object allows configuration of the low range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeResPDVFwdMediumRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.19
This object allows configuration of the medium range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeResPDVFwdHighRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.20
This object allows configuration of the high range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeResPDVRevLowRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.21
This object allows configuration of the low range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeResPDVRevMediumRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.22
This object allows configuration of the medium range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeResPDVRevHighRange 1.3.6.1.4.1.2544.1.12.22.1.9.1.23
This object allows configuration of the high range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeScheduler 1.3.6.1.4.1.2544.1.12.22.1.9.1.24
This object provides the associated scheduler instance, if one exists, with this PTP Network Probe. This value is 0.0, if there is no scheduler associated with the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

f3SyncJPTPNetworkProbeTestState 1.3.6.1.4.1.2544.1.12.22.1.9.1.25
This object provides the PTP Network Probe test state.
Status: current Access: read-only
OBJECT-TYPE    
  SyncJackTestState  

f3SyncJPTPNetworkProbeNoTimestampFailure 1.3.6.1.4.1.2544.1.12.22.1.9.1.26
This object provides information on whether the measured PTP source indicated a no-timestamp failure.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPNetworkProbeNoEventMessageFailure 1.3.6.1.4.1.2544.1.12.22.1.9.1.27
This object provides information on whether the measured PTP source indicated a no-event message failure.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPNetworkProbeFwdScore 1.3.6.1.4.1.2544.1.12.22.1.9.1.28
This object provides the current score in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeRevScore 1.3.6.1.4.1.2544.1.12.22.1.9.1.29
This object provides the current score in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeReferenceFailure 1.3.6.1.4.1.2544.1.12.22.1.9.1.30
This object provides information on whether the reference failed.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPNetworkProbeStorageType 1.3.6.1.4.1.2544.1.12.22.1.9.1.31
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

f3SyncJPTPNetworkProbeRowStatus 1.3.6.1.4.1.2544.1.12.22.1.9.1.32
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJPTPNetworkProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJPTPNetworkProbeRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3SyncJPTPNetworkProbeRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

f3SyncJPTPNetworkProbeResultsAvailable 1.3.6.1.4.1.2544.1.12.22.1.9.1.33
The results available configured for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJScheduleGroupTable 1.3.6.1.4.1.2544.1.12.22.1.10
A list of entries that allow a set of SyncJack Clock Probes, PTP Clock Probes and PTP Network Probes to be scheduled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJScheduleGroupEntry

f3SyncJScheduleGroupEntry 1.3.6.1.4.1.2544.1.12.22.1.10.1
A row in f3SyncJScheduleGroupTable. Entries are created in this table by management application action.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJScheduleGroupEntry  

f3SyncJScheduleGroupIndex 1.3.6.1.4.1.2544.1.12.22.1.10.1.1
A unique index to distinguish the SyncJack Schedule Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

f3SyncJScheduleGroupDescr 1.3.6.1.4.1.2544.1.12.22.1.10.1.2
Description of the SyncJack schedule group.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..256)  

f3SyncJScheduleGroupEntityList 1.3.6.1.4.1.2544.1.12.22.1.10.1.3
A comma separated list of Clock Probes, PTP Clock Probes and PTP Network Probes, that will have the same schedule.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..512)  

f3SyncJScheduleGroupType 1.3.6.1.4.1.2544.1.12.22.1.10.1.4
This object allows to specify the schedule group type of the SyncJack Schedule group. Only 'one-shot' is supported.
Status: current Access: read-create
OBJECT-TYPE    
  ScheduleType  

f3SyncJScheduleGroupStartTime 1.3.6.1.4.1.2544.1.12.22.1.10.1.5
This object allows specification of the start time of the SyncJack Schedule Group. Value of time less than current system time will equate to current time. When the system time reaches this configured time, the SyncJack Schedule Group will be activated.
Status: current Access: read-create
OBJECT-TYPE    
  DateAndTime  

f3SyncJScheduleGroupDuration 1.3.6.1.4.1.2544.1.12.22.1.10.1.6
This object allows specification of the duration in 'seconds' for SyncJack Schedule Group run. Note that a value of 4294967295 means Duration as FOREVER.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

f3SyncJScheduleGroupStatus 1.3.6.1.4.1.2544.1.12.22.1.10.1.7
This object indicates the current status of the SyncJack Schedule Group.
Status: current Access: read-only
OBJECT-TYPE    
  SchedActivityStatus  

f3SyncJScheduleGroupStorageType 1.3.6.1.4.1.2544.1.12.22.1.10.1.8
The type of storage configured for this entry.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

f3SyncJScheduleGroupRowStatus 1.3.6.1.4.1.2544.1.12.22.1.10.1.9
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3SyncJScheduleGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3SyncJScheduleGroupRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3SyncJScheduleGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

f3SyncJPTPNetworkProbeStatsTable 1.3.6.1.4.1.2544.1.12.22.2.1
A collection of SyncJack PTP Network Probe statistics. These reflect the current data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJPTPNetworkProbeStatsEntry

f3SyncJPTPNetworkProbeStatsEntry 1.3.6.1.4.1.2544.1.12.22.2.1.1
A conceptual row in the f3SyncJPTPNetworkProbeStatsTable. Entries exist in this table for each PTP Network Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJPTPNetworkProbeStatsEntry  

f3SyncJPTPNetworkProbeStatsIndex 1.3.6.1.4.1.2544.1.12.22.2.1.1.1
An arbitrary integer index value used to uniquely identify this PTPNetworkProbe statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3 corresponds to rollover.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..3  

f3SyncJPTPNetworkProbeStatsIntervalType 1.3.6.1.4.1.2544.1.12.22.2.1.1.2
Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover.
Status: current Access: read-only
OBJECT-TYPE    
  CmPmIntervalType  

f3SyncJPTPNetworkProbeStatsValid 1.3.6.1.4.1.2544.1.12.22.2.1.1.3
Indicates the validity of the bin.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPNetworkProbeStatsAction 1.3.6.1.4.1.2544.1.12.22.2.1.1.4
Allows the Manager to clear the bin.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmBinAction  

f3SyncJPTPNetworkProbeStatsSyncMsgsRx 1.3.6.1.4.1.2544.1.12.22.2.1.1.5
Number of PTP Sync messages received at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter32  

f3SyncJPTPNetworkProbeStatsDelayRspMsgsRx 1.3.6.1.4.1.2544.1.12.22.2.1.1.6
Number of PTP Delay Response messages received at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter32  

f3SyncJPTPNetworkProbeStatsLostSyncMsgs 1.3.6.1.4.1.2544.1.12.22.2.1.1.7
Number of PTP Sync messages counted as lost at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter32  

f3SyncJPTPNetworkProbeStatsLostDelayRspMsgs 1.3.6.1.4.1.2544.1.12.22.2.1.1.8
Number of PTP Delay Response messages counted as lost at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter32  

f3SyncJPTPNetworkProbeStatsMinMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.9
Minimum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsMaxMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.10
Maximum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsAvgMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.11
Average Mean Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsMinSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.12
Minimum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsMaxSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.13
Maximum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsAvgSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.14
Average Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsAvgResPDVFwd 1.3.6.1.4.1.2544.1.12.22.2.1.1.15
Average Residual Packet Delay Variation in nanoseconds in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsResPDVFwdLow 1.3.6.1.4.1.2544.1.12.22.2.1.1.16
Total number of Low Range Residual Packet Delay Variation results in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsResPDVFwdMedium 1.3.6.1.4.1.2544.1.12.22.2.1.1.17
Total number of Medium Range Residual Packet Delay Variation results in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsResPDVFwdHigh 1.3.6.1.4.1.2544.1.12.22.2.1.1.18
Total number of High Range Residual Packet Delay Variation results in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsResPDVFwdTotal 1.3.6.1.4.1.2544.1.12.22.2.1.1.19
Total number of Residual Packet Delay Variation results in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsFwdScore5 1.3.6.1.4.1.2544.1.12.22.2.1.1.20
Total time the network usability score is 5 in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsFwdScore4 1.3.6.1.4.1.2544.1.12.22.2.1.1.21
Total time the network usability score is 4 in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsFwdScore3 1.3.6.1.4.1.2544.1.12.22.2.1.1.22
Total time the network usability score is 3 in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsAvgResPDVRev 1.3.6.1.4.1.2544.1.12.22.2.1.1.23
Average Residual Packet Delay Variation in nanoseconds in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsResPDVRevLow 1.3.6.1.4.1.2544.1.12.22.2.1.1.24
Total number of Low Range Residual Packet Delay Variation results in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsResPDVRevMedium 1.3.6.1.4.1.2544.1.12.22.2.1.1.25
Total number of Medium Range Residual Packet Delay Variation results in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsResPDVRevHigh 1.3.6.1.4.1.2544.1.12.22.2.1.1.26
Total number of High Range Residual Packet Delay Variation results in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsResPDVRevTotal 1.3.6.1.4.1.2544.1.12.22.2.1.1.27
Total number of Residual Packet Delay Variation results in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsRevScore5 1.3.6.1.4.1.2544.1.12.22.2.1.1.28
Total time the network usability score is 5 in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsRevScore4 1.3.6.1.4.1.2544.1.12.22.2.1.1.29
Total time the network usability score is 4 in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsRevScore3 1.3.6.1.4.1.2544.1.12.22.2.1.1.30
Total time the network usability score is 3 in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsMinRPDVFwd 1.3.6.1.4.1.2544.1.12.22.2.1.1.31
Minimum Residual PDV in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsMinRPDVRev 1.3.6.1.4.1.2544.1.12.22.2.1.1.32
Minimum Residual PDV in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsMinPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.1.1.33
The min path asymmetry for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsMaxPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.1.1.34
The max path asymmetry for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsAvgPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.1.1.35
The average path asymmetry for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsPathLossSecondsFwd 1.3.6.1.4.1.2544.1.12.22.2.1.1.36
The path loss seconds forwarded for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsPathLossSecondsRev 1.3.6.1.4.1.2544.1.12.22.2.1.1.37
The path loss seconds reverted for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeStatsMinDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.38
Minimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsMaxDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.39
Maximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeStatsAvgDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.1.1.40
Average Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryTable 1.3.6.1.4.1.2544.1.12.22.2.2
A collection of SyncJack PTP Network Probe statistics. These reflect the history data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJPTPNetworkProbeHistoryEntry

f3SyncJPTPNetworkProbeHistoryEntry 1.3.6.1.4.1.2544.1.12.22.2.2.1
A conceptual row in the f3SyncJPTPNetworkProbeHistoryTable. Entries exist in this table for each PTP Network Probe.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJPTPNetworkProbeHistoryEntry  

f3SyncJPTPNetworkProbeHistoryIndex 1.3.6.1.4.1.2544.1.12.22.2.2.1.1
An arbitrary integer index value used to uniquely identify this SyncJack PTP Network Probe PM history entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..32  

f3SyncJPTPNetworkProbeHistoryTime 1.3.6.1.4.1.2544.1.12.22.2.2.1.2
Indicates the time of history bin creation.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

f3SyncJPTPNetworkProbeHistoryValid 1.3.6.1.4.1.2544.1.12.22.2.2.1.3
Indicates the validity of the bin.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

f3SyncJPTPNetworkProbeHistoryAction 1.3.6.1.4.1.2544.1.12.22.2.2.1.4
Allows the Manager to clear the bin.
Status: current Access: read-write
OBJECT-TYPE    
  CmPmBinAction  

f3SyncJPTPNetworkProbeHistorySyncMsgsRx 1.3.6.1.4.1.2544.1.12.22.2.2.1.5
Number of PTP Sync messages received at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter32  

f3SyncJPTPNetworkProbeHistoryDelayRspMsgsRx 1.3.6.1.4.1.2544.1.12.22.2.2.1.6
Number of PTP Delay Response messages received at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter32  

f3SyncJPTPNetworkProbeHistoryLostSyncMsgs 1.3.6.1.4.1.2544.1.12.22.2.2.1.7
Number of PTP Sync messages counted as lost at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter32  

f3SyncJPTPNetworkProbeHistoryLostDelayRspMsgs 1.3.6.1.4.1.2544.1.12.22.2.2.1.8
Number of PTP Delay Response messages counted as lost at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter32  

f3SyncJPTPNetworkProbeHistoryMinMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.9
Minimum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryMaxMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.10
Maximum Mean Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryAvgMeanPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.11
Average Mean Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryMinSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.12
Minimum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryMaxSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.13
Maximum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryAvgSyncPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.14
Average Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryAvgResPDVFwd 1.3.6.1.4.1.2544.1.12.22.2.2.1.15
Average Residual Packet Delay Variation in nanoseconds in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryResPDVFwdLow 1.3.6.1.4.1.2544.1.12.22.2.2.1.16
Total number of Low Range Residual Packet Delay Variation results in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryResPDVFwdMedium 1.3.6.1.4.1.2544.1.12.22.2.2.1.17
Total number of Medium Range Residual Packet Delay Variation results in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryResPDVFwdHigh 1.3.6.1.4.1.2544.1.12.22.2.2.1.18
Total number of High Range Residual Packet Delay Variation results in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryResPDVFwdTotal 1.3.6.1.4.1.2544.1.12.22.2.2.1.19
Total number of Residual Packet Delay Variation results in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryFwdScore5 1.3.6.1.4.1.2544.1.12.22.2.2.1.20
Total time the network usability score is 5 in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryFwdScore4 1.3.6.1.4.1.2544.1.12.22.2.2.1.21
Total time the network usability score is 4 in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryFwdScore3 1.3.6.1.4.1.2544.1.12.22.2.2.1.22
Total time the network usability score is 3 in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryAvgResPDVRev 1.3.6.1.4.1.2544.1.12.22.2.2.1.23
Average Residual Packet Delay Variation in nanoseconds in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryResPDVRevLow 1.3.6.1.4.1.2544.1.12.22.2.2.1.24
Total number of Low Range Residual Packet Delay Variation results in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryResPDVRevMedium 1.3.6.1.4.1.2544.1.12.22.2.2.1.25
Total number of Medium Range Residual Packet Delay Variation results in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryResPDVRevHigh 1.3.6.1.4.1.2544.1.12.22.2.2.1.26
Total number of High Range Residual Packet Delay Variation results in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryResPDVRevTotal 1.3.6.1.4.1.2544.1.12.22.2.2.1.27
Total number of Residual Packet Delay Variation results in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryRevScore5 1.3.6.1.4.1.2544.1.12.22.2.2.1.28
Total time the network usability score is 5 in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryRevScore4 1.3.6.1.4.1.2544.1.12.22.2.2.1.29
Total time the network usability score is 4 in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryRevScore3 1.3.6.1.4.1.2544.1.12.22.2.2.1.30
Total time the network usability score is 3 in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryMinRPDVFwd 1.3.6.1.4.1.2544.1.12.22.2.2.1.31
Minimum Residual PDV in the forward direction.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryMinRPDVRev 1.3.6.1.4.1.2544.1.12.22.2.2.1.32
Minimum Residual PDV in the reverse direction.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryMinPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.2.1.33
The min path asymmetry for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryMaxPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.2.1.34
The max path asymmetry for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryAvgPathAsymmetry 1.3.6.1.4.1.2544.1.12.22.2.2.1.35
The average path asymmetry for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeHistoryMinDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.36
Minimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryMaxDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.37
Maximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeHistoryAvgDelayReqPathDelay 1.3.6.1.4.1.2544.1.12.22.2.2.1.38
Average Delay Req Path Delay in nanoseconds computed at the PTP Network Probe.
Status: current Access: read-only
OBJECT-TYPE    
  ScaledNanoseconds  

f3SyncJPTPNetworkProbeThresholdTable 1.3.6.1.4.1.2544.1.12.22.2.3
A table of entries that allow support the PTP Network Probe Thresholds.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3SyncJPTPNetworkProbeThresholdEntry

f3SyncJPTPNetworkProbeThresholdEntry 1.3.6.1.4.1.2544.1.12.22.2.3.1
A conceptual row in the f3SyncJPTPNetworkProbeThresholdTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3SyncJPTPNetworkProbeThresholdEntry  

f3SyncJPTPNetworkProbeThresholdIndex 1.3.6.1.4.1.2544.1.12.22.2.3.1.1
An index that uniquely identifies an entry in the f3SyncJPTPNetworkProbeThresholdTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

f3SyncJPTPNetworkProbeThresholdInterval 1.3.6.1.4.1.2544.1.12.22.2.3.1.2
The interval over which monitored value is sampled and compared with the specified threshold.
Status: current Access: read-only
OBJECT-TYPE    
  CmPmIntervalType  

f3SyncJPTPNetworkProbeThresholdVariable 1.3.6.1.4.1.2544.1.12.22.2.3.1.3
The object identifier of the particular variable to be sampled.
Status: current Access: read-only
OBJECT-TYPE    
  VariablePointer  

f3SyncJPTPNetworkProbeThresholdValueLo 1.3.6.1.4.1.2544.1.12.22.2.3.1.4
Lower 32 bits of the threshold value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeThresholdValueHi 1.3.6.1.4.1.2544.1.12.22.2.3.1.5
Higher 32 bits of the threshold value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

f3SyncJPTPNetworkProbeThresholdMonValue 1.3.6.1.4.1.2544.1.12.22.2.3.1.6
Monitored value corresponding to f3SyncJPTPNetworkProbeThresholdVariable.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter64  

f3SyncJPTPNetworkProbeThresholdCrossingAlert 1.3.6.1.4.1.2544.1.12.22.3.1
This trap is sent each time a threshold on a PM condition on an PTP Network Probe is crossed.
Status: current Access: read-only
NOTIFICATION-TYPE    

f3SyncJClockProbeStatusChangeTrap 1.3.6.1.4.1.2544.1.12.22.3.2
This trap is sent each time any status changes happen on a SyncJack Clock Probe.
Status: current Access: read-only
NOTIFICATION-TYPE    

f3SyncJPTPClockProbeStatusChangeTrap 1.3.6.1.4.1.2544.1.12.22.3.3
This trap is sent each time any status changes happen on a SyncJack PTP Clock Probe.
Status: current Access: read-only
NOTIFICATION-TYPE    

f3SyncJPTPNetworkProbeStatusChangeTrap 1.3.6.1.4.1.2544.1.12.22.3.4
This trap is sent each time any status changes happen on a SyncJack PTP Network Probe.
Status: current Access: read-only
NOTIFICATION-TYPE    

f3SyncJCompliances 1.3.6.1.4.1.2544.1.12.22.4.1
OBJECT IDENTIFIER    

f3SyncJGroups 1.3.6.1.4.1.2544.1.12.22.4.2
OBJECT IDENTIFIER    

f3SyncJCompliance 1.3.6.1.4.1.2544.1.12.22.4.1.1
Describes the requirements for conformance to the F3 SyncJack group.
Status: current Access: read-only
MODULE-COMPLIANCE    

f3SyncJObjectGroup 1.3.6.1.4.1.2544.1.12.22.4.2.1
A collection of objects used to manage the F3 SyncJack Configuration data.
Status: current Access: read-only
OBJECT-GROUP    

f3SyncJPerfObjectGroup 1.3.6.1.4.1.2544.1.12.22.4.2.2
A collection of objects used to manage the F3 SyncJack Performance data.
Status: current Access: read-only
OBJECT-GROUP    

f3SyncJNotifGroup 1.3.6.1.4.1.2544.1.12.22.4.2.3
A collection of notifications related to F3 SyncJack functionality.
Status: current Access: read-only
NOTIFICATION-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor