F3-PBB-MIB

File: F3-PBB-MIB.mib (20113 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CM-FACILITY-MIB CM-IP-MIB CM-COMMON-MIB
CM-PERFORMANCE-MIB ADVA-MIB

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE Integer32 DisplayString
TruthValue MacAddress VariablePointer
cmEthernetAccPortEntry cmEthernetNetPortEntry cmFlowEntry
FlowTagControl ipManagementTunnelEntry PerfCounter64
cmEthernetNetPortStatsEntry cmEthernetNetPortHistoryEntry fsp150cm

Defined Types

F3PbbEthernetAccPortEntry  
SEQUENCE    
  f3PbbEthernetAccPortITagLoopbackMask INTEGER
  f3PbbEthernetAccPortITagLoopback1 DisplayString
  f3PbbEthernetAccPortITagLoopback2 DisplayString
  f3PbbEthernetAccPortITagLoopback3 DisplayString

F3PbbEthernetNetPortEntry  
SEQUENCE    
  f3PbbEthernetNetPortBackboneMacAddress MacAddress
  f3PbbEthernetNetPortITagLoopbackMask INTEGER
  f3PbbEthernetNetPortITagLoopback1 DisplayString
  f3PbbEthernetNetPortITagLoopback2 DisplayString
  f3PbbEthernetNetPortITagLoopback3 DisplayString

F3PbbFlowEntry  
SEQUENCE    
  f3PbbFlowITagControl FlowTagControl
  f3PbbFlowITagISID Integer32
  f3PbbFlowITagPriority Integer32
  f3PbbFlowBackboneMacDestinationEnabled TruthValue
  f3PbbFlowBackboneMacDestinationAddress MacAddress
  f3PbbFlowA2NPbbCapableFlag TruthValue

F3PbbIpManagementTunnelEntry  
SEQUENCE    
  f3PbbIpManagementTunnelItagEnabled TruthValue
  f3PbbIpManagementTunnelISID Integer32
  f3PbbIpManagementTunnelIPriority Integer32
  f3PbbIpManagementTunnelBackboneMacDestinationEnabled TruthValue
  f3PbbIpManagementTunnelBackboneMacDestinationAddress MacAddress

F3PbbEthernetNetPortStatsEntry  
SEQUENCE    
  f3PbbEthernetNetPortStatsPbbUniBdaDiscard PerfCounter64
  f3PbbEthernetNetPortStatsPbbGroupBdaDiscard PerfCounter64

F3PbbEthernetNetPortHistoryStatsEntry  
SEQUENCE    
  f3PbbEthernetNetPortHistoryStatsPbbUniBdaDiscard PerfCounter64
  f3PbbEthernetNetPortHistoryStatsPbbGroupBdaDiscard PerfCounter64

Defined Values

f3PBBMIB 1.3.6.1.4.1.2544.1.12.21
This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
MODULE-IDENTITY    

f3PBBConfigObjects 1.3.6.1.4.1.2544.1.12.21.1
OBJECT IDENTIFIER    

f3PBBPerformanceObjects 1.3.6.1.4.1.2544.1.12.21.2
OBJECT IDENTIFIER    

f3PBBConformance 1.3.6.1.4.1.2544.1.12.21.3
OBJECT IDENTIFIER    

f3PbbEthernetAccPortTable 1.3.6.1.4.1.2544.1.12.21.1.1
A list of entries corresponding to PBB function on the net port
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3PbbEthernetAccPortEntry

f3PbbEthernetAccPortEntry 1.3.6.1.4.1.2544.1.12.21.1.1.1
A conceptual row in the f3PbbEthernetAccPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3PbbEthernetAccPortEntry  

f3PbbEthernetAccPortITagLoopbackMask 1.3.6.1.4.1.2544.1.12.21.1.1.1.1
This object allows to specify which itag loopback has been enabled. 1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

f3PbbEthernetAccPortITagLoopback1 1.3.6.1.4.1.2544.1.12.21.1.1.1.2
This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

f3PbbEthernetAccPortITagLoopback2 1.3.6.1.4.1.2544.1.12.21.1.1.1.3
This object allows specification of the Itag 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

f3PbbEthernetAccPortITagLoopback3 1.3.6.1.4.1.2544.1.12.21.1.1.1.4
This object allows specification of the Itag 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

f3PbbEthernetNetPortTable 1.3.6.1.4.1.2544.1.12.21.1.2
A list of entries corresponding to PBB function on the net port
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3PbbEthernetNetPortEntry

f3PbbEthernetNetPortEntry 1.3.6.1.4.1.2544.1.12.21.1.2.1
A conceptual row in the f3PbbEthernetNetPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3PbbEthernetNetPortEntry  

f3PbbEthernetNetPortBackboneMacAddress 1.3.6.1.4.1.2544.1.12.21.1.2.1.1
This object is mac address of backbone network port.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

f3PbbEthernetNetPortITagLoopbackMask 1.3.6.1.4.1.2544.1.12.21.1.2.1.2
This object allows to specify which itag loopback has been enabled. 1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

f3PbbEthernetNetPortITagLoopback1 1.3.6.1.4.1.2544.1.12.21.1.2.1.3
This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

f3PbbEthernetNetPortITagLoopback2 1.3.6.1.4.1.2544.1.12.21.1.2.1.4
This object allows specification of the Itag 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

f3PbbEthernetNetPortITagLoopback3 1.3.6.1.4.1.2544.1.12.21.1.2.1.5
This object allows specification of the Itag 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

f3PbbFlowTable 1.3.6.1.4.1.2544.1.12.21.1.3
A list of entries corresponding to PBB function on the flow
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3PbbFlowEntry

f3PbbFlowEntry 1.3.6.1.4.1.2544.1.12.21.1.3.1
A conceptual row in the f3PbbFlowTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3PbbFlowEntry  

f3PbbFlowITagControl 1.3.6.1.4.1.2544.1.12.21.1.3.1.1
This object allows specification of the tag management operation on the I-TAG. Supported types are 'none', 'push', and 'pushisid'. and it must be none while ctagcontrol or stagcontrol is not none.
Status: current Access: read-write
OBJECT-TYPE    
  FlowTagControl  

f3PbbFlowITagISID 1.3.6.1.4.1.2544.1.12.21.1.3.1.2
This object is used to specify the ITagISID. Its rang from 256 to 16777214.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 256..16777214  

f3PbbFlowITagPriority 1.3.6.1.4.1.2544.1.12.21.1.3.1.3
This object is used to specify the priority of ITag. Its rang from 0 to 7.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

f3PbbFlowBackboneMacDestinationEnabled 1.3.6.1.4.1.2544.1.12.21.1.3.1.4
This object indicates whether can assign BMAC value. When enabled, user can assign a unicast BMAC as B_DA for this EVC When disabled, 01-1E-83- will be used as B-DA.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

f3PbbFlowBackboneMacDestinationAddress 1.3.6.1.4.1.2544.1.12.21.1.3.1.5
Customer can configure the backbone MAC destination address, the default value is 01-1E-83-.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

f3PbbFlowA2NPbbCapableFlag 1.3.6.1.4.1.2544.1.12.21.1.3.1.6
When it is false, Drop PBB frames in the A2N direction (FPGA function), Allow to PUSH I-TAG on this flow; When A2NPbbCapableFlag is TRUE, Pass PBB frames in the A2N direction (FPGA function), Software allow PUSH I-TAG on this flow(normal) will not allow to PUSH S-TAG on this flow, will not allow to PUSH C-TAG on this flow, Software will allow to PUSH C-TAG/S-TAG on this flow.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

f3PbbIpManagementTunnelTable 1.3.6.1.4.1.2544.1.12.21.1.4
A list of entries corresponding to PBB function on the mngt tunnel
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3PbbIpManagementTunnelEntry

f3PbbIpManagementTunnelEntry 1.3.6.1.4.1.2544.1.12.21.1.4.1
A conceptual row in the f3PbbIpManagementTunnelTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3PbbIpManagementTunnelEntry  

f3PbbIpManagementTunnelItagEnabled 1.3.6.1.4.1.2544.1.12.21.1.4.1.1
This object ITAG whether enabled, It is Enabled only When management tunnel type is ISID based. By default it is disabled
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

f3PbbIpManagementTunnelISID 1.3.6.1.4.1.2544.1.12.21.1.4.1.2
Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 256..16777214  

f3PbbIpManagementTunnelIPriority 1.3.6.1.4.1.2544.1.12.21.1.4.1.3
Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG, no use at present).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

f3PbbIpManagementTunnelBackboneMacDestinationEnabled 1.3.6.1.4.1.2544.1.12.21.1.4.1.4
When enabled, we will use provisioned B-MAC for ARP and for management packets. When disabled, we will use backbone group MAC address for ARP and get B-DA from ARP response By default, it is disabled
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

f3PbbIpManagementTunnelBackboneMacDestinationAddress 1.3.6.1.4.1.2544.1.12.21.1.4.1.5
User must set a valid MAC address, Only applicable when iTagEnabled = enabled By default, it is 00:00:00:00:00:00
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

f3PbbEthernetNetPortStatsTable 1.3.6.1.4.1.2544.1.12.21.2.1
A collection of pbb Ethernet Network Port related statistics. These reflect the current data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3PbbEthernetNetPortStatsEntry

f3PbbEthernetNetPortStatsEntry 1.3.6.1.4.1.2544.1.12.21.2.1.1
A conceptual row in the f3PbbEthernetNetPortStatsTable. Entries exist in this table for each Ethernet interface/port.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3PbbEthernetNetPortStatsEntry  

f3PbbEthernetNetPortStatsPbbUniBdaDiscard 1.3.6.1.4.1.2544.1.12.21.2.1.1.1
Number of PBB frames (BDA is not backbone group MAC) discarded due to receive BDA which is not matching the port's PBB MAC address when port is non-promiscuous mode.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter64  

f3PbbEthernetNetPortStatsPbbGroupBdaDiscard 1.3.6.1.4.1.2544.1.12.21.2.1.1.2
Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID in backbone group MAC in the B-DA when port is non-promiscuous mode.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter64  

f3PbbEthernetNetPortHistoryStatsTable 1.3.6.1.4.1.2544.1.12.21.2.2
A collection of pbb Ethernet Network Port related statistics. These reflect the current data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3PbbEthernetNetPortHistoryStatsEntry

f3PbbEthernetNetPortHistoryStatsEntry 1.3.6.1.4.1.2544.1.12.21.2.2.1
A conceptual row in the f3PbbEthernetNetPortHistoryStatsTable. Entries exist in this table for each Ethernet interface/port.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3PbbEthernetNetPortHistoryStatsEntry  

f3PbbEthernetNetPortHistoryStatsPbbUniBdaDiscard 1.3.6.1.4.1.2544.1.12.21.2.2.1.1
Number of PBB frames (BDA is not backbone group MAC) discarded due to receive BDA which is not matching the port's PBB MAC address when port is non-promiscuous mode.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter64  

f3PbbEthernetNetPortHistoryStatsPbbGroupBdaDiscard 1.3.6.1.4.1.2544.1.12.21.2.2.1.2
Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID in backbone group MAC in the B-DA when port is non-promiscuous mode.
Status: current Access: read-only
OBJECT-TYPE    
  PerfCounter64  

f3PBBCompliances 1.3.6.1.4.1.2544.1.12.21.3.1
OBJECT IDENTIFIER    

f3PBBGroups 1.3.6.1.4.1.2544.1.12.21.3.2
OBJECT IDENTIFIER    

f3PBBCompliance 1.3.6.1.4.1.2544.1.12.21.3.1.1
Describes the requirements for conformance to the PBB Object group.
Status: current Access: read-only
MODULE-COMPLIANCE    

f3PbbConfigGroup 1.3.6.1.4.1.2544.1.12.21.3.2.1
A collection of objects used to manage the F3 PBB Functionality .
Status: current Access: read-only
OBJECT-GROUP    

f3PbbStatsGroup 1.3.6.1.4.1.2544.1.12.21.3.2.2
A collection of objects used to manage the F3 PBB Functionality .
Status: current Access: read-only
OBJECT-GROUP