F10-ISIS-MIB
File:
F10-ISIS-MIB.mib (10125 bytes)
Imported modules
Imported symbols
Defined Types
| F10IsisISLevel |
|
| Identifies a level. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
area(1), domain(2) |
|
| F10IsisSysLevelEntry |
|
| SEQUENCE |
|
|
|
| |
f10IsisSysLevelIndex |
F10IsisISLevel |
|
| |
f10IsisSysLevelOverloadState |
TruthValue |
|
| |
f10IsisSysLevelV6OverloadState |
TruthValue |
|
Defined Values
| f10IsisMib |
1.3.6.1.4.1.6027.3.18 |
| The proprietary MIB module for Force10 ISIS. |
| MODULE-IDENTITY |
|
|
|
| f10IsisSysOloadSetOverload |
1.3.6.1.4.1.6027.3.18.1.1 |
| Administratively set the overload bit for both levels.
The overload bit MUST continue to be set if the
implementation runs out of memory, independent of
this variable. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| f10IsisSysOloadSetOloadOnStartupUntil |
1.3.6.1.4.1.6027.3.18.1.2 |
| If this object is non-zero, the overload bit is set
for both levels when isis is enabled for next startup. The overload bit
remains set for seconds.f10IsisSysOloadSetOloadOnStartupUntil
When f10IsisSysOloadSetOloadOnStartupUntil seconds have elapsed,
the overload flag remains set if the implementation has
run out of memory. Else, the system clears
the overload bit when f10IsisSysOloadSetOloadOnStartupUntil seconds
have elapsed, if the system has not run out of memory. A value of zero
removes the config so that it will not be effected in the next startup. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..65535 |
|
| f10IsisSysOloadWaitForBgp |
1.3.6.1.4.1.6027.3.18.1.3 |
| If this object is non-zero, the overload bit is set
for both levels when isis is enabled for next startup. The overload bit
remains set until BGP has converged or
for seconds.f10IsisSysOloadWaitForBgp, whichever
occurs first. A value of zero
removes the config so that it will not be effected for the next startup. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..65535 |
|
| f10IsisSysOloadV6SetOverload |
1.3.6.1.4.1.6027.3.18.1.4 |
| Administratively set the overload bit for both levels.
The overload bit MUST continue to be set if the
implementation runs out of memory, independent of
this variable. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| f10IsisSysOloadV6SetOloadOnStartupUntil |
1.3.6.1.4.1.6027.3.18.1.5 |
| If this object is non-zero, the overload bit is set
for both levels when isis is enabled for next startup. The overload bit
remains set for seconds.f10IsisSysOloadSetOloadOnStartupUntil
When f10IsisSysOloadSetOloadV6OnStartupUntil seconds have elapsed,
the overload flag remains set if the implementation has
run out of memory. Else, the system clears
the overload bit when f10IsisSysOloadV6SetOloadOnStartupUntil seconds
have elapsed, if the system has not run out of memory. A value of zero
removes the config so that it will not be effected in the next startup. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..65535 |
|
| f10IsisSysOloadV6WaitForBgp |
1.3.6.1.4.1.6027.3.18.1.6 |
| If this object is non-zero, the overload bit is set
for both levels for IPV6 when isis is enabled for next startup. The overload bit
remains set until BGP has converged for both IPV4 and IPV6 neighbours or
for seconds.f10IsisSysOloadV6WaitForBgp, whichever
occurs first. A value of zero
removes the config so that it will not be effected for the next startup. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..65535 |
|
| f10IsisSysLevelEntry |
1.3.6.1.4.1.6027.3.18.1.7.1 |
| Each row describes variables configured for Area or Domain.
Configured values MUST survive an agent reboot. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
F10IsisSysLevelEntry |
|
|
| f10IsisSysLevelOverloadState |
1.3.6.1.4.1.6027.3.18.1.7.1.2 |
| The Overload state of the database at this level.
If the value is true, it indicates a database that is
low on an essential resource, such as memory.
The administrator may indirectly force the state to
overloaded by setting the object f10IsisSysOloadSetOverload.
If the state is overloaded, we
originate LSPs with the Overload bit set. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| f10IsisSysLevelV6OverloadState |
1.3.6.1.4.1.6027.3.18.1.7.1.3 |
| The Overload state of the IPV6 database at this level.
If the value is true, it indicates a database that is
low on an essential resource, such as memory.
The administrator may indirectly force the state to
overloaded by setting the object f10IsisSysOloadV6SetOverload.
If the state is overloaded, we
originate LSPs with the Overload bit set. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| f10IsisAdjChanges |
1.3.6.1.4.1.6027.3.18.0.1 |
| This notification is generated when adjacency related
changes take place |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| f10IsisCompliance |
1.3.6.1.4.1.6027.3.18.2.2.1 |
| The compliance statement for agents that support
the IS-IS MIB |
| Status: current |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| f10IsisSystemGroup |
1.3.6.1.4.1.6027.3.18.2.1.1 |
| The collection of objects used to manage an
IS-IS router. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| f10IsisNotificationGroup |
1.3.6.1.4.1.6027.3.18.2.1.2 |
| The collections of notifications sent by an IS. |
| Status: current |
Access: read-only |
| NOTIFICATION-GROUP |
|
|
|