ExtendAirG2

File: ExtendAirG2.mib (4805 bytes)

Imported modules

SNMPv2-SMI	ExaltComm	SNMPv2-CONF
ExaltComProducts	SNMPv2-TC

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
RadioSourceT	BandwidthT	ModulationT
RadioTxPwr11gT	BuzTimeoutT	DiplexerConfigG2T
ExaltEnableT	AcmBaseModulationT	AcmTargetModulationT
AcmPolicyT	AcmPowerBoostEnableT	OBJECT-GROUP
systemConfig	DisplayString

Defined Values

extendAirG2		1.3.6.1.4.1.25651.1.2.3.1.57
This is the Device Specific configuration for the ExtendAirG2 Licensed radio.
MODULE-IDENTITY

extendAirG2TxPower		1.3.6.1.4.1.25651.1.2.3.1.57.1
The Transmit Power level multiplied by 10.0 -
Status: current	Access: read-write
OBJECT-TYPE
	RadioTxPwr11gT

extendAirG2Bandwidth		1.3.6.1.4.1.25651.1.2.3.1.57.2
The RF bandwidth. -
Status: current	Access: read-write
OBJECT-TYPE
	BandwidthT

extendAirG2Modulation		1.3.6.1.4.1.25651.1.2.3.1.57.3
The Mode. -
Status: current	Access: read-write
OBJECT-TYPE
	ModulationT

extendAirG2TXfrequency		1.3.6.1.4.1.25651.1.2.3.1.57.4
The TX Frequency/ -.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(2..9)

extendAirG2RXfrequency		1.3.6.1.4.1.25651.1.2.3.1.57.5
The RX Frequency/ -.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(2..9)

extendAirG2DiplexerConfiguration		1.3.6.1.4.1.25651.1.2.3.1.57.6
The diplexer (label 701-802) configuration/ -.
Status: current	Access: read-write
OBJECT-TYPE
	DiplexerConfigG2T

extendAirG2InsertionLoss		1.3.6.1.4.1.25651.1.2.3.1.57.7
Inserion Loss is applicable for 'OTHER' diplexer entities only/ -.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..200

extendAirG2BuzTimeout		1.3.6.1.4.1.25651.1.2.3.1.57.8
This sets buzzer timeout period. User Options are: buzzer off, 10 minutes or 2 hours.
Status: current	Access: read-write
OBJECT-TYPE
	BuzTimeoutT

extendAirG2AcmMode		1.3.6.1.4.1.25651.1.2.3.1.57.9
ACM Mode enable/disable.
Status: current	Access: read-write
OBJECT-TYPE
	ExaltEnableT

extendAirG2AcmPolicy		1.3.6.1.4.1.25651.1.2.3.1.57.10
The ACM Policy (Conservative/agressive).
Status: current	Access: read-write
OBJECT-TYPE
	AcmPolicyT

extendAirG2AcmBaseModulation		1.3.6.1.4.1.25651.1.2.3.1.57.11
The ACM Base Mode.
Status: current	Access: read-write
OBJECT-TYPE
	AcmBaseModulationT

extendAirG2AcmTargetModulation		1.3.6.1.4.1.25651.1.2.3.1.57.12
The ACM Target Mode.
Status: current	Access: read-write
OBJECT-TYPE
	AcmTargetModulationT

extendAirG2AcmPowerBoostMode		1.3.6.1.4.1.25651.1.2.3.1.57.15
The ACM Power Boost Mode.
Status: current	Access: read-write
OBJECT-TYPE
	AcmPowerBoostEnableT

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor