ExaltComm

File: ExaltComm.mib (52311 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC

Imported symbols

MODULE-IDENTITY enterprises Integer32
Gauge32 TEXTUAL-CONVENTION

Defined Types

RadioSourceT  
The Radio Source. Radio A or Radio B
TEXTUAL-CONVENTION    
  INTEGER radioA(1), radioB(2)  

BandwidthT  
The Radio Bandwidth.
TEXTUAL-CONVENTION    
  INTEGER khz1750(1750), khz3500(3500), khz5000(5000), khz7000(7000), khz8000(8000), khz10000(10000), khz12500(12500), khz13750(13750), khz14000(14000), khz16000(16000), khz20000(20000), khz25000(25000), khz27500(27500), khz28000(28000), khz29650(29650), khz30000(30000), khz32000(32000), khz40000(40000), khz50000(50000), khz55000(55000), khz56000(56000), khz59300(59300), khz60000(60000), khz64000(64000), khz80000(80000)  

ModulationT  
These are the supported Modulation types.
TEXTUAL-CONVENTION    
  INTEGER mQPSK(0), m16QAM(1), m32QAM(5), m64QAM(2), m128QAM(3), m256QAM(4), m512QAM(6)  

LinkDistanceT  
The Distance between Radios in miles.
TEXTUAL-CONVENTION    
  INTEGER under2(2), under5(5), under10(10), under20(20), under50(50)  

TddFrameSizeT  
The TDD Frame Size enum in tenths of milliseconds.
TEXTUAL-CONVENTION    
  INTEGER tdd05(5), tdd10(10), tdd20(20), tdd25(25), tdd40(40), tdd50(50)  

ExtAlarmsT  
This is the condidtion that an alarm should be raised.
TEXTUAL-CONVENTION    
  INTEGER alarmOnCLOSE(1), alarmOnOPEN(2)  

EthMainStatusT  
The Main ethernet port status.
TEXTUAL-CONVENTION    
  INTEGER enableWithMute(0), enableNOmute(1), disableAlarm(2)  

EthAuxStatusT  
The Aux ethernet port Alarm enabled status
TEXTUAL-CONVENTION    
  INTEGER enableAlarm(0), disableAlarm(1)  

EthPortMode  
The Ethernet port operation Modes
TEXTUAL-CONVENTION    
  INTEGER full100(0), full10(1), half100(2), half10(3), auto(4)  

GbeEthPortMode  
The Ethernet port operation Modes for GigE interfaces
TEXTUAL-CONVENTION    
  INTEGER full1000(1), half1000(2), full100(3), half100(4), full10(5), half10(6), auto(7)  

AuxNmsMode  
The NMS mode (in-band or out-of-band)
TEXTUAL-CONVENTION    
  INTEGER inBand(1), outBand(2)  

EnableStatusT  
Enable / Disable parameter
TEXTUAL-CONVENTION    
  INTEGER disable(0), enable(1)  

EthernetMgmtTypeT  
Defines Ethernet switch management options
TEXTUAL-CONVENTION    
  INTEGER inBand(0), outOfBand(1), portToPort(2), legacy(3), advanced(4)  

MhsRoleT  
The designated role of the MHS.
TEXTUAL-CONVENTION    
  INTEGER notDefined(0), primary(1), secondary(2)  

MhsLockOnT  
Lock on configuration of the MHS.
TEXTUAL-CONVENTION    
  INTEGER noLock(0), lockOnline(1), lockStandby(2)  

MhsTimeoutT  
The lock on timeout of the MHS.
TEXTUAL-CONVENTION    
  INTEGER infinite(0), twentySeconds(1), tenMinutes(2)  

Te1StatusT  
The T1/E1 enabled status.
TEXTUAL-CONVENTION    
  INTEGER disabled(0), enabled(1)  

Te1LboT  
The Te1 LBO types.
TEXTUAL-CONVENTION    
  INTEGER notAvail(-1), lbo0to133(0), lbo133to266(1), lbo266to399(2), lbo399to533(3), lbo533to655(4)  

Te1LineCodeT  
The T1/E1 Line Codes.
TEXTUAL-CONVENTION    
  INTEGER notAvail(-1), b8zs(0), ami(1)  

Te1LoopBackModeT  
These are the loopback modes of the T1/E1 interfaces.
TEXTUAL-CONVENTION    
  INTEGER lbDisabled(0), lbExtLocal(1), lbExtRemote(2), lbInternal(3)  

AlarmLevelT  
The Alarm Levels.
TEXTUAL-CONVENTION    
  INTEGER almNORMAL(0), almMINOR(1), almMAJOR(2), almDisable(3), almNotAvailable(4), almClearChanel(5), almNonOccupant(6)  

BandSelectT  
The Band Selections
TEXTUAL-CONVENTION    
  INTEGER ghz53(0), ghz54(1), ghz58(2)  

FreqGroupT  
The Frequency Group
TEXTUAL-CONVENTION    
  INTEGER all(0), preferred(1)  

Led4ColorT  
4 Color front pannel LED Bitmap.
TEXTUAL-CONVENTION    
  INTEGER ledOFF(0), redSlowBlink(85), yellowSlowBlink(102), greenSlowBlink(119), redFastBlink(153), yellowFastBlink(170), greenFastBlink(187), redON(221), yellowON(238), greenON(255)  

RadioFreq24T  
This is the 2.4 ghz band freq ranges.
TEXTUAL-CONVENTION    
  Integer32 2406..2468  

RadioFreq5gT  
These are the 5.3 and 5.8 Freq ranges.
TEXTUAL-CONVENTION    
  Integer32 5260..5332 | 5731..5844  

RadioTxPwr24T  
The 2.4 GHz band Power levels.
TEXTUAL-CONVENTION    
  Integer32 70..270  

RadioTxPwr5gT  
The 5 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 -70..240  

RadioTxPwr6gT  
The 6 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..320  

RadioTxPwr7LgT  
The 7.0L GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..320  

RadioTxPwr7gT  
The 7 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 30..270  

RadioTxPwr8gT  
The 8 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 30..270  

RadioTxPwr11gT  
The 11 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..270  

RadioTxPwrHP11gT  
The 11 GHz HP Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 100..290  

RadioTxPwr13gT  
The 13 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..270  

RadioTxPwr15gT  
The 15 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..270  

RadioTxPwr18gT  
The 18 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..270  

RadioTxPwr23gT  
The 23 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..260  

RadioTxPwr24gT  
The 24 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 -250..50  

RadioTxPwr28gT  
The 28 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..260  

RadioTxPwr38gT  
The 38 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..240  

RadioTxPwr42gT  
The 42 GHz Band Power levels.
TEXTUAL-CONVENTION    
  Integer32 0..230  

DiplexerConfigG2T  
These are diplexer configuration options for lower band radios, where Unconfigured is not configurable.
TEXTUAL-CONVENTION    
  INTEGER unconfigured(0), diplexer701(701), diplexer702(702), diplexer703(703), diplexer704(704), diplexer705(705), diplexer706(706), diplexer707(707), diplexer708(708), diplexer709(709), diplexer710(710), diplexer711(711), diplexer712(712), diplexer713(713), diplexer714(714), diplexer715(715), diplexer716(716), diplexer717(717), diplexer718(718), diplexer719(719), diplexer720(720), diplexer721(721), diplexer722(722), diplexer723(723), diplexer724(724), diplexer725(725), diplexer726(726), diplexer727(727), diplexer728(728), diplexer729(729), diplexer730(730), diplexer731(731), diplexer732(732), diplexer733(733), diplexer734(734), diplexer735(735), diplexer736(736), diplexer737(737), diplexer738(738), diplexer739(739), diplexer740(740), diplexer741(741), diplexer742(742), diplexer743(743), diplexer744(744), diplexer745(745), diplexer746(746), diplexer747(747), diplexer748(748), diplexer749(749), diplexer750(750), diplexer751(751), diplexer752(752), diplexer753(753), diplexer754(754), diplexer755(755), diplexer756(756), diplexer757(757), diplexer758(758), diplexer759(759), diplexer760(760), diplexer761(761), diplexer762(762), diplexer763(763), diplexer764(764), diplexer765(765), diplexer766(766), diplexer767(767), diplexer768(768), diplexer769(769), diplexer770(770), diplexer771(771), diplexer772(772), diplexer773(773), diplexer774(774), diplexer775(775), diplexer776(776), diplexer777(777), diplexer778(778), diplexer779(779), diplexer780(780), diplexer781(781), diplexer782(782), diplexer783(783), diplexer784(784), diplexer785(785), diplexer786(786), diplexer787(787), diplexer788(788), diplexer789(789), diplexer790(790), diplexer791(791), diplexer792(792), diplexer793(793), diplexer794(794), diplexer795(795), diplexer796(796), diplexer797(797), diplexer798(798), diplexer799(799), diplexer800(800), diplexer801(801), diplexer802(802), diplexer803(803), diplexer804(804), diplexer805(805), diplexer806(806), diplexer807(807), diplexer808(808), diplexer809(809), diplexer810(810), diplexer811(811), diplexer812(812), diplexer813(813), diplexer814(814), diplexer815(815), diplexer816(816), diplexer817(817), diplexer818(818), diplexer819(819), diplexer820(820), diplexer821(821), diplexer822(822), diplexer823(823), diplexer824(824), diplexer825(825), diplexer826(826), diplexer827(827), diplexer828(828), diplexer829(829), diplexer830(830), diplexer831(831), diplexer832(832), diplexer833(833), diplexer834(834), diplexer835(835), diplexer836(836), diplexer837(837), diplexer838(838), diplexer839(839), diplexer840(840), diplexer841(841), diplexer842(842), diplexer843(843), diplexer844(844), diplexer845(845), diplexer846(846), diplexer847(847), diplexer848(848), diplexer849(849), diplexer850(850), diplexer851(851), diplexer852(852), diplexer853(853), diplexer854(854), diplexer855(855), diplexer856(856), diplexer857(857), diplexer858(858), diplexer859(859), diplexer860(860), diplexer861(861), diplexer862(862), diplexer863(863), diplexer864(864), diplexer865(865), diplexer866(866), diplexer867(867), diplexer868(868), diplexer869(869), diplexer870(870), diplexer871(871), diplexer872(872), diplexer875(875), diplexer876(876), diplexer877(877), diplexer878(878), diplexer879(879), diplexer880(880), diplexer881(881), diplexer882(882), diplexer883(883), diplexer884(884), diplexer885(885), diplexer886(886), diplexer887(887), diplexer888(888), diplexer889(889), diplexer890(890), diplexer891(891), diplexer892(892), diplexer893(893), diplexer894(894), diplexer895(895), diplexer896(896), diplexer897(897), diplexer898(898), diplexer899(899), diplexer900(900), diplexer901(901), diplexer902(902), diplexer903(903), diplexer904(904), diplexer905(905), diplexer906(906), diplexer907(907), diplexer908(908), diplexer909(909), diplexer910(910), diplexer911(911), diplexer912(912), diplexer913(913), diplexer914(914), diplexer915(915), diplexer916(916), diplexer917(917), diplexer918(918), diplexer919(919), diplexer920(920), other(7)  

DiplexerConfigT  
These are diplexer configuration options for lower band radios, where Unconfigured is not configurable.
TEXTUAL-CONVENTION    
  INTEGER unconfigured(0), diplexer125(125), diplexer126(126), diplexer127(127), diplexer128(128), diplexer129(129), diplexer130(130), diplexer301(301), diplexer302(302), diplexer303(303), diplexer304(304), diplexer305(305), diplexer306(306), diplexer307(307), diplexer308(308), diplexer309(309), diplexer310(310), diplexer311(311), diplexer312(312), diplexer313(313), diplexer314(314), diplexer315(315), diplexer316(316), diplexer317(317), diplexer318(318), diplexer319(319), diplexer320(320), diplexer321(321), diplexer322(322), diplexer323(323), diplexer324(324), diplexer325(325), diplexer326(326), diplexer327(327), diplexer328(328), diplexer329(329), diplexer330(330), diplexer331(331), diplexer332(332), diplexer333(333), diplexer334(334), diplexer335(335), diplexer336(336), diplexer337(337), diplexer338(338), diplexer339(339), diplexer340(340), diplexer341(341), diplexer342(342), diplexer343(343), diplexer344(344), diplexer345(345), diplexer346(346), diplexer347(347), diplexer348(348), diplexer349(349), diplexer350(350), diplexer351(351), diplexer352(352), diplexer353(353), diplexer354(354), diplexer355(355), diplexer356(356), diplexer357(357), diplexer358(358), diplexer359(359), diplexer360(360), diplexer361(361), diplexer362(362), diplexer363(363), diplexer364(364), diplexer365(365), diplexer366(366), diplexer367(367), diplexer368(368), diplexer377(377), diplexer378(378), diplexer379(379), diplexer380(380), diplexer381(381), diplexer382(382), diplexer389(389), diplexer390(390), diplexer391(391), diplexer392(392), diplexer393(393), diplexer394(394), diplexer395(395), diplexer396(396), diplexer397(397), diplexer398(398), diplexer399(399), diplexer400(400), diplexer401(401), diplexer402(402), diplexer403(403), diplexer404(404), diplexer405(405), diplexer406(406), diplexer407(407), diplexer408(408), diplexer409(409), diplexer410(410), diplexer411(411), diplexer412(412), diplexer413(413), diplexer414(414), diplexer415(415), diplexer416(416), other(7)  

RadioCollocSyncSourceT  
This is the source to get SYNC timing. Choices are Off, GPS, or Internal
TEXTUAL-CONVENTION    
  INTEGER syncOFF(0), syncGPS(1), syncINTERNAL(2)  

RadioCollocSyncTypeT  
This is the radio SYNC type. Choices are SYNC_AUTO, SYNC_SRC, SYNC_SINK or SYNC_NONE
TEXTUAL-CONVENTION    
  INTEGER syncAuto(1), syncSrc(2), syncSink(3), syncNone(4)  

VlanStatusT  
This is definition for Vlan status. (Enabled or disabled)
TEXTUAL-CONVENTION    
  INTEGER disabled(0), enableBlkUtag(1), enablePassUtag(2), enableTagUtag(3), enableMgmtOnly(4)  

VlanIdT  
The VLAN ID
TEXTUAL-CONVENTION    
  Integer32 1..4095  

VlanGroupT  
These are the Valid options for vlan ethernet interfaces.
TEXTUAL-CONVENTION    
  INTEGER groupNONE(0), groupETH2(1), groupPoE1(2), groupETH2andPoE1(3)  

TxOffsetT  
This MIB variable sets TX offset(in uSecs) of our radios to sync with other vendors' radios in a collocated configuration.
TEXTUAL-CONVENTION    
  Integer32 0..5000  

AntPortT  
This MIB variable selects antenna port for ODU. 1- portA for 5rc, port H for 5r , ANT1 for 5rc Denali 2- portB for 5rc, portV for 5r, ANT2 for 5rc Denali;
TEXTUAL-CONVENTION    
  INTEGER portONE(1), portTWO(2)  

PolarizationT  
This MIB variable selects ODU polarizations for GigE radios. 1 - selects portV for Veritical , 2 - select portH for Horizontal , 3- for Cross-Pole (V+H)
TEXTUAL-CONVENTION    
  INTEGER portV(1), portH(2), portVplusH(3)  

RslPortT  
This MIB variable sets the RF channel for antenna alignment purpose.
TEXTUAL-CONVENTION    
  INTEGER portV(1), portH(2)  

BuzTimeoutT  
This MIB variable selects ODU buzzer timeout period. 1 - turns off buzzer, 2 - sets buzzer timeout period to 10 minutes, 3 - sets buzzer timeout period to 2 hours.
TEXTUAL-CONVENTION    
  INTEGER buzzerOFF(0), buzzerTenMinute(1), buzzerTwoHour(2)  

FlyWheelT  
This MIB variable selects ODU fly wheeling timeout period. 0 - fly wheel for 5 minutes, 1 - fly wheel forever.
TEXTUAL-CONVENTION    
  INTEGER fwNormal(0), fwInfinite(1)  

TxDcycleT  
This sets Fixed Asymmetric Throughput in both tx and rx directions. User Options are: tx(20%)/rx(80%), 35/65, 50/50, 65/35 and 80/20.
TEXTUAL-CONVENTION    
  INTEGER t20r80(1), t35r65(2), t50r50(3), t65r35(4), t80r20(5)  

DfsEnableT  
This MIB variable sets DFS enable/disable option; this is option is availble for Radio A only.
TEXTUAL-CONVENTION    
  INTEGER disable(0), enable(1)  

DfsAntGainT  
This MIB variable sets DFS antenna gain (in dB); available antenna gain ranges from 18 to 38 dB, with 1 dB step.
TEXTUAL-CONVENTION    
  Integer32 18..38  

QosTagT  
This MIB variable sets Qos 802.1p tag.
TEXTUAL-CONVENTION    
  INTEGER 0..7  

QosQueueSizePercentT  
The Qos queue size in percentage
TEXTUAL-CONVENTION    
  Integer32 1..100  

QosQueueSizeByteT  
The Qos queue size in bytes
TEXTUAL-CONVENTION    
  Integer32 1..2097152  

QosTtlT  
The Qos time to live in miliseconds in a queue
TEXTUAL-CONVENTION    
  Integer32 100..100000  

V35StatusT  
The V35 enabled status.
TEXTUAL-CONVENTION    
  INTEGER disabled(0), enabled(1)  

V35RateT  
The V35 channel rate Depends upon the T1/E1 settings of V35 Interface channel rate selction differs To set V35_T1, T1 mode should be selected To set V35_E1, E1 mode should be selected.
TEXTUAL-CONVENTION    
  INTEGER v35Rate56K(0), v35Rate64K(1), v35Rate128K(2), v35Rate256K(3), v35Rate384K(4), v35Rate512K(5), v35Rate768K(6), v35Rate1024K(7), v35Rate1544K(8), v35Rate2048K(9)  

V35ClockInversionT  
The V35 clock inversion.
TEXTUAL-CONVENTION    
  INTEGER txNormalRxNormal(0), txInvertRxNormal(1), txNormalRxInvert(2), txInvertRxInvert(3)  

V35TxClockT  
The V35 transmit clock .
TEXTUAL-CONVENTION    
  INTEGER rxClock(0), externalTxClock(1), internalGenerator(2)  

V35CTSHandshakeT  
The V35 CTS handshake.
TEXTUAL-CONVENTION    
  INTEGER handshakeAlwaysOn(0), handshakeFollowRTS(1)  

V35LoopBackModeT  
These are the loopback modes of the V35 interfaces.
TEXTUAL-CONVENTION    
  INTEGER lbDisabled(0), lbExtLocal(1), lbExtRemote(2), lbInternal(3)  

DS3StatusT  
The DS3 enabled status.
TEXTUAL-CONVENTION    
  INTEGER disabled(0), enabled(1)  

DS3LineCodeT  
The DS3 Line Codes.
TEXTUAL-CONVENTION    
  INTEGER notAvail(-1), b8zs(0), ami(1)  

DS3LoopBackModeT  
These are the loopback modes of the DS3 interfaces.
TEXTUAL-CONVENTION    
  INTEGER lbDisabled(0), lbExtLocal(1), lbExtRemote(2), lbInternal(3)  

ExaltEnableT  
Enable / Disable parameter
TEXTUAL-CONVENTION    
  INTEGER disable(0), enable(1)  

AcmPolicyT  
This MIB variable selects ACM Policy. 0 - sets Conservative policy, 1 - sets Agressive policy.
TEXTUAL-CONVENTION    
  INTEGER conservative(0), agressive(1)  

AcmBaseModulationT  
These are the supported ACM Base Modulation types.
TEXTUAL-CONVENTION    
  INTEGER mQPSK(0), m8PSK(6), m16QAM(1), m32QAM(5), m64QAM(2), m128QAM(3), m256QAM(4)  

AcmTargetModulationT  
These are the supported ACM Target Modulation types.
TEXTUAL-CONVENTION    
  INTEGER m16QAM(1), m32QAM(5), m64QAM(2), m128QAM(3), m256QAM(4), m512QAM(6)  

AcmModulationT  
These are the supported ACM Modulation types. When ACM is disabled or when telemetry is down, the modulation is -9999.
TEXTUAL-CONVENTION    
  INTEGER notAvailable(-9999), mQPSK(0), m8PSK(7), m16QAM(1), m32QAM(5), m64QAM(2), m128QAM(3), m256QAM(4), m512QAM(6), mBPSK2(8), mQPSK2(9), m8PSK2(10), m16QAM2(14), m32QAM2(11), m64QAM2(12), m128QAM2(13), m512QAM2(15), mQPSK3(16), mBPSK3(17)  

TcmModulationT  
These are the supported TCM Modulation types. When ACM is enabled, the TCM modulation will be invalid.
TEXTUAL-CONVENTION    
  INTEGER notAvailable(-9999), mQPSKThru(0), m16QAMThru(1), m32QAMThru(5), m64QAMThru(2), m128QAMThru(3), m256QAMThru(4), mQPSKBase(8), m16QAMBase(9), m32QAMBase(13), m64QAMBase(10), m128QAMBase(11), m256QAMBase(12), mQPSKSysG(16), m16QAMSysG(17), m32QAMSysG(21), m64QAMSysG(18), m128QAMSysG(19), m256QAMSysG(20)  

AcmPowerBoostEnableT  
ACM Power Boost Enable / Disable parameter
TEXTUAL-CONVENTION    
  INTEGER disable(0), enable(1)  

FileTransferTypeT  
Supported file transfer types.
TEXTUAL-CONVENTION    
  INTEGER uploadFirmware(0), uploadConfig(1), uploadRDD(2), downloadFirmware(3), downloadConfig(4), downloadMIBs(5), downloadEventLogs(6)  

FileTransferStartT  
Supported file start/status types.
TEXTUAL-CONVENTION    
  INTEGER noAction(0), startTransfer(1)  

PerformanceModeT  
These are the supported performance mode when TCM modulation is used.
TEXTUAL-CONVENTION    
  INTEGER maxThroughputMinLatency(0), maxSystemGain(1), balancedPerformance(2)  

NtpClientEnableT  
Enable or disable NTP client
TEXTUAL-CONVENTION    
  INTEGER disable(0), enableWith1Server(1), enableWith2Servers(2), enableWith3Servers(3), enableWith4Servers(4)  

TimeZoneT  
Time Zone
TEXTUAL-CONVENTION    
  INTEGER samoa(0), hawaii(1), alaska(2), pacific(3), arizona(4), mountain(5), central(6), eastern(7), east-Indiana(8), atlantic(9), uTC(10), london(11), berlin(12), belgrade(13), paris(14), cairo(15), helsinki(16), baghdad(17), moscow(18), tehran(19), kabul(20), karachi(21), bangkok(22), shanghai(23), taipei(24), tokyo(25), seoul(26), sydney(27), vladivostok(28)  

SyslogEnableT  
Enable or disable Syslog logging to remote.
TEXTUAL-CONVENTION    
  INTEGER disabled(0), enabled(1)  

SyslogFilterSelectT  
Select logging filter to control events to be sent to remote host
TEXTUAL-CONVENTION    
  INTEGER all(0), minor(1), minorMajorCritical(2), major(3), majorCritical(4), critical(5)  

DualRadioXpicEnableT  
Disable XPIC or enable XPIC with vertical/horizontal polarity
TEXTUAL-CONVENTION    
  INTEGER disable(0), vertical(1), horizontal(2)  

MefEnableT  
Enable or disable MEF setting
TEXTUAL-CONVENTION    
  INTEGER disabled(0), enabled(1)  

MefMasterModeT  
MEF Master Mode (Sync Ethernet)
TEXTUAL-CONVENTION    
  INTEGER auto(0), forceMaster(1), forceSlave(2), notPresent(3)  

MefIrgT  
MEF IRG
TEXTUAL-CONVENTION    
  INTEGER r64kbps(0), r128kbps(1), r256kbps(2), r512kbps(3), r1000kbps(4)  

MefMacT  
MEF MAC Block
TEXTUAL-CONVENTION    
  INTEGER discard(0), forward(1)  

MefRateLimitTypeT  
The MEF ethernet rate limit type in KBPS (or) MBPS.
TEXTUAL-CONVENTION    
  INTEGER kbps(0), mbps(1)  

MefRateLimitValueT  
The MEF ethernet rate limit, if the rate limit is enabled, the value is applied on to the port. eg., rate in KBPS (64..1792, stepsize 64) rate in MBPS (2..100, stepsize 1) and (104..1000, stepsize 8)
TEXTUAL-CONVENTION    
  Integer32  

Defined Values

exaltcommunications 1.3.6.1.4.1.25651
OBJECT IDENTIFIER