EQLIPSEC-MIB
File:
EQLIPSEC-MIB.mib (38719 bytes)
Imported modules
Imported symbols
Defined Types
| SnmpAdminString |
|
| An octet string containing administrative
information, preferably in human-readable form. |
| TEXTUAL-CONVENTION |
|
|
|
| |
OCTET STRING |
Size(0..1024) |
|
| InetPortNumber |
|
| Represents a 16 bit port number of an Internet transport
layer protocol. Port numbers are assigned by IANA. A
current list of all assignments is available from
.
The value zero is object-specific and must be defined as
part of the description of any object that uses this
syntax. Examples of the usage of zero might include
situations where a port number is unknown, or when the
value zero is used as a wildcard in a filter. |
| TEXTUAL-CONVENTION |
|
|
|
| |
Unsigned32 |
0..65535 |
|
| IpsecAuthType |
|
| The IpsecAuthType is used to specify the authentication
type to be used with a particular peer. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
presharedkey(1), certificates(2), manualkey(3) |
|
| IpsecIdType |
|
| The IpsecIdType is used to specify the type of identifier
for a peer to be used with the ID payload. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
none(1), ipaddress(2), userfqdn(3), fqdn(4), asn1dn(5) |
|
| IpsecEncType |
|
| The IpsecEncType is used to specify the encryption
algorithm to be used when manual keying is used. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
nullenc(1), aes-cbc(2), triple-des-cbc(3) |
|
| EqlIpsecEntry |
|
| SEQUENCE |
|
|
|
| |
eqlIpsecInstanceId |
Integer32 |
|
| |
eqlIpsecEnable |
TruthValue |
|
| |
eqlIpsecRowStatus |
RowStatus |
|
| EqlIpsecPolicyEntry |
|
| SEQUENCE |
|
|
|
| |
eqlIpsecPolicyInstanceId |
Integer32 |
|
| |
eqlIpsecPolicyFilterName |
SnmpAdminString |
|
| |
eqlIpsecPolicyFilterIPVersion |
InetAddressType |
|
| |
eqlIpsecPolicyFilterAddress |
InetAddress |
|
| |
eqlIpsecPolicyFilterNetmaskLen |
Integer32 |
|
| |
eqlIpsecPolicyFilterLocalAddress |
InetAddress |
|
| |
eqlIpsecPolicyFilterPort |
Integer32 |
|
| |
eqlIpsecPolicyFilterLocalPort |
Integer32 |
|
| |
eqlIpsecPolicyFilterProtocol |
Integer32 |
|
| |
eqlIpsecPolicyFilterPeerName |
SnmpAdminString |
|
| |
eqlIpsecPolicyFilterAction |
INTEGER |
|
| |
eqlIpsecPolicyFilterRowStatus |
RowStatus |
|
| EqlIpsecCertConfigEntry |
|
| SEQUENCE |
|
|
|
| |
eqlIpsecCertInstanceId |
Integer32 |
|
| |
eqlIpsecCertName |
SnmpAdminString |
|
| |
eqlIpsecCertFileName |
SnmpAdminString |
|
| |
eqlIpsecCertType |
INTEGER |
|
| |
eqlIpsecPrivKeyFileName |
SnmpAdminString |
|
| |
eqlIpsecCertPassword |
SnmpAdminString |
|
| |
eqlIpsecCertRowStatus |
RowStatus |
|
| EqlIpsecPeerEntry |
|
| SEQUENCE |
|
|
|
| |
eqlIpsecPeerInstanceId |
Integer32 |
|
| |
eqlIpsecPeerName |
SnmpAdminString |
|
| |
eqlIpsecPeerAuthType |
INTEGER |
|
| |
eqlIpsecPeerPreSharedKey |
DisplayString |
|
| |
eqlIpsecPeerCertIdType |
INTEGER |
|
| |
eqlIpsecPeerCertIdValue |
SnmpAdminString |
|
| |
eqlIpsecPeerNullEnc |
TruthValue |
|
| |
eqlIpsecPeerTunnelMode |
TruthValue |
|
| |
eqlIpsecPeerTunnelAddressIPVersion |
InetAddressType |
|
| |
eqlIpsecPeerTunnelAddress |
InetAddress |
|
| |
eqlIpsecPeerIkeV2 |
TruthValue |
|
| |
eqlIpsecPeerManualKeyEncAlg |
INTEGER |
|
| |
eqlIpsecPeerManualKeyEncKeyOut |
SnmpAdminString |
|
| |
eqlIpsecPeerManualKeyEncKeyIn |
SnmpAdminString |
|
| |
eqlIpsecPeerManualKeyAuthAlg |
INTEGER |
|
| |
eqlIpsecPeerManualKeyAuthKeyOut |
SnmpAdminString |
|
| |
eqlIpsecPeerManualKeyAuthKeyIn |
SnmpAdminString |
|
| |
eqlIpsecPeerManualKeySpiOut |
Integer32 |
|
| |
eqlIpsecPeerManualKeySpiIn |
Integer32 |
|
| |
eqlIpsecPeerRowStatus |
RowStatus |
|
| EqlIpsecCertDisplayEntry |
|
| SEQUENCE |
|
|
|
| |
eqlIpsecCertDisplayName |
SnmpAdminString |
|
| |
eqlIpsecCertDisplayIssuedToDName |
SnmpAdminString |
|
| |
eqlIpsecCertDisplaySerialNumber |
SnmpAdminString |
|
| |
eqlIpsecCertDisplayIssuedByDName |
SnmpAdminString |
|
| |
eqlIpsecCertDisplayIssuedOn |
SnmpAdminString |
|
| |
eqlIpsecCertDisplayExpiresOn |
SnmpAdminString |
|
| |
eqlIpsecCertDisplaySha1Fingerprint |
SnmpAdminString |
|
| |
eqlIpsecCertDisplayMd5Fingerprint |
SnmpAdminString |
|
| |
eqlIpsecCertDisplayLocal |
INTEGER |
|
| |
eqlIpsecCertDisplayFormat |
INTEGER |
|
| |
eqlIpsecCertDisplaySubAltName |
SnmpAdminString |
|
| EqlIpsecSecAssocEntry |
|
| SEQUENCE |
|
|
|
| |
eqlIpsecSecAssocInstanceIdHigh |
Unsigned32 |
|
| |
eqlIpsecSecAssocInstanceIdLow |
Unsigned32 |
|
| |
eqlIpsecSecAssocSrcAddressIPVersion |
InetAddressType |
|
| |
eqlIpsecSecAssocSrcAddress |
InetAddress |
|
| |
eqlIpsecSecAssocDstAddressIPVersion |
InetAddressType |
|
| |
eqlIpsecSecAssocDstAddress |
InetAddress |
|
| |
eqlIpsecSecAssocEncAlg |
INTEGER |
|
| |
eqlIpsecSecAssocAuthAlg |
INTEGER |
|
| |
eqlIpsecSecAssocSpi |
Integer32 |
|
| |
eqlIpsecSecAssocEncKey |
SnmpAdminString |
|
| |
eqlIpsecSecAssocAuthKey |
SnmpAdminString |
|
| |
eqlIpsecSecAssocManual |
TruthValue |
|
| EqlIpsecStaleSecAssocDeleteEntry |
|
| SEQUENCE |
|
|
|
| |
eqlIpsecStaleSecAssocDeleteInstanceId |
Integer32 |
|
| |
eqlIpsecStaleSecAssocDeleteDestAddressIPVersion |
InetAddressType |
|
| |
eqlIpsecStaleSecAssocDeleteDestAddress |
InetAddress |
|
| |
eqlIpsecStaleSecAssocDeleteRowStatus |
RowStatus |
|
Defined Values
| eqlIpsecModule |
1.3.6.1.4.1.12740.22 |
| Equallogic Inc. group information
Copyright (c) 2002-2010 by Dell, Inc.
All rights reserved. This software may not be copied, disclosed,
transferred, or used except in accordance with a license granted
by Dell, Inc. This software embodies proprietary information
and trade secrets of Dell, Inc.
|
| MODULE-IDENTITY |
|
|
|
| eqlIpsecTable |
1.3.6.1.4.1.12740.22.1.1 |
| EqualLogic-Persistent Storage IPSec global settings
This table contains global IPSec settings. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EqlIpsecEntry |
|
| eqlIpsecEntry |
1.3.6.1.4.1.12740.22.1.1.1 |
| An entry (row) containing global IPSec settings. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EqlIpsecEntry |
|
|
| eqlIpsecInstanceId |
1.3.6.1.4.1.12740.22.1.1.1.1 |
| This index identifies the IPSec instance. This index should always be 1. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| eqlIpsecEnable |
1.3.6.1.4.1.12740.22.1.1.1.2 |
| This specifies if IPSec is enabled or disbaled.
True for enabled and False for disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| eqlIpsecRowStatus |
1.3.6.1.4.1.12740.22.1.1.1.3 |
| This object indicates the conceptual status of this row.
This object may not be set to active if the requirements
of the spdIpHeadFiltType object are not met. In other
words, if the associated value columns needed by a
particular test have not been set, then attempting to
change this row to an active state will result in an
inconsistentValue error. See the spdIpHeadFiltType
object description for further details. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| eqlIpsecPolicyTable |
1.3.6.1.4.1.12740.22.1.2 |
| EqualLogic-Persistent Storage IPSec Policy Table.
This table contains a list of filter definitions. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EqlIpsecPolicyEntry |
|
| eqlIpsecPolicyEntry |
1.3.6.1.4.1.12740.22.1.2.1 |
| A definition of a particular filter. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EqlIpsecPolicyEntry |
|
|
| eqlIpsecPolicyFilterIPVersion |
1.3.6.1.4.1.12740.22.1.2.1.3 |
| The Internet Protocol version the addresses are to match
against. The value of this property determines the size
and format of the eqlIpsecPolicyFilterAddress and
eqlIpsecPolicyFilterLocalAddress. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
InetAddressType |
|
|
| eqlIpsecPolicyFilterAddress |
1.3.6.1.4.1.12740.22.1.2.1.4 |
| The starting address of a source address range that the
packet must match against for this filter to be
considered TRUE.
This object is only used if sourceAddress is set in
spdIpHeadFiltType. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
InetAddress |
|
|
| eqlIpsecPolicyFilterNetmaskLen |
1.3.6.1.4.1.12740.22.1.2.1.5 |
| The ending address of a source address range to check a
packet against, where the starting is specified by the
spdIpHeadFiltSrcAddressBegin object. Set this column to
the same value as the spdIpHeadFiltSrcAddressBegin
column to get an exact single address match.
This object is only used if sourceAddress is set in
spdIpHeadFiltType. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..128 |
|
| eqlIpsecPolicyFilterLocalAddress |
1.3.6.1.4.1.12740.22.1.2.1.6 |
| The Local IP Address on the array to bind a policy to.
This option is only used when the Peer is of type manual.
Can be either a IPv4 or IPV6 address. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
InetAddress |
|
|
| eqlIpsecPolicyFilterPort |
1.3.6.1.4.1.12740.22.1.2.1.7 |
| The low port of the port range a packet's source must
match against. To match, the port number must be
greater than or equal to this value.
This object is only used if sourcePort is set in
spdIpHeadFiltType.
The value of 0 for this object is illegal. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..65535 |
|
| eqlIpsecPolicyFilterLocalPort |
1.3.6.1.4.1.12740.22.1.2.1.8 |
| The low port of the port range a packet's source must
match against. To match, the port number must be
greater than or equal to this value.
This object is only used if sourcePort is set in
spdIpHeadFiltType.
The value of 0 for this object is illegal.
This object specifies the local port to be used. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..65535 |
|
| eqlIpsecPolicyFilterProtocol |
1.3.6.1.4.1.12740.22.1.2.1.9 |
| The protocol number the incoming packet must match
against for this filter to be evaluated as true.
This object is only used if protocol is set in
spdIpHeadFiltType. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..255 |
|
| eqlIpsecPolicyFilterAction |
1.3.6.1.4.1.12740.22.1.2.1.11 |
| The action to be taken on packets matching this rule. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
ipsec(1), pass(2), drop(3) |
|
| eqlIpsecPolicyFilterRowStatus |
1.3.6.1.4.1.12740.22.1.2.1.12 |
| This object indicates the conceptual status of this row.
This object may not be set to active if the requirements
of the spdIpHeadFiltType object are not met. In other
words, if the associated value columns needed by a
particular test have not been set, then attempting to
change this row to an active state will result in an
inconsistentValue error. See the spdIpHeadFiltType
object description for further details. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| eqlIpsecCertConfigTable |
1.3.6.1.4.1.12740.22.1.3 |
| EqualLogic-Dynamic IPSec certificate configuration Table.
This table contains the list of certificates configured. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EqlIpsecCertConfigEntry |
|
| eqlIpsecCertConfigEntry |
1.3.6.1.4.1.12740.22.1.3.1 |
| A definition of a particular certificate. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EqlIpsecCertConfigEntry |
|
|
| eqlIpsecCertInstanceId |
1.3.6.1.4.1.12740.22.1.3.1.1 |
| This index identifies the IPSec certificate instance. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| eqlIpsecCertName |
1.3.6.1.4.1.12740.22.1.3.1.2 |
| The administrative name for this certificate. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| eqlIpsecCertType |
1.3.6.1.4.1.12740.22.1.3.1.4 |
| The certificate type. Local cert, Root CA cert or intermediate cert. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
local-cert(1), root-cert(2), intermediate(3) |
|
| eqlIpsecCertRowStatus |
1.3.6.1.4.1.12740.22.1.3.1.7 |
| This object indicates the conceptual status of this row.
This object may not be set to active if the requirements
of the spdIpHeadFiltType object are not met. In other
words, if the associated value columns needed by a
particular test have not been set, then attempting to
change this row to an active state will result in an
inconsistentValue error. See the spdIpHeadFiltType
object description for further details. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| eqlIpsecPeerTable |
1.3.6.1.4.1.12740.22.1.4 |
| EqualLogic-Persistent Storage IPSec peer Table.
This table contains the list of peers configured. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EqlIpsecPeerEntry |
|
| eqlIpsecPeerEntry |
1.3.6.1.4.1.12740.22.1.4.1 |
| A definition of a particular certificate. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EqlIpsecPeerEntry |
|
|
| eqlIpsecPeerInstanceId |
1.3.6.1.4.1.12740.22.1.4.1.1 |
| This index identifies the IPSec policy instance. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| eqlIpsecPeerName |
1.3.6.1.4.1.12740.22.1.4.1.2 |
| The administrative name for this peer. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..64) |
|
| eqlIpsecPeerAuthType |
1.3.6.1.4.1.12740.22.1.4.1.3 |
| The authentication method used with this peer.
Pre-shared keys, certificates and manual keys are the options. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
presharedkey(1), certificates(2), manualkey(3) |
|
| eqlIpsecPeerPreSharedKey |
1.3.6.1.4.1.12740.22.1.4.1.4 |
| The pre-shared key to be used during authentication.
It is mandatory that this only contain printable ASCII
ASCII characters, meaning each byte must be in the range
of 33 to 126. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(6..130) |
|
| eqlIpsecPeerCertIdType |
1.3.6.1.4.1.12740.22.1.4.1.5 |
| The identifier type to be used in ID payload.
Only applicable if the auth type is certificates. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), ipaddress(2), userfqdn(3), fqdn(4), asn1dn(5) |
|
| eqlIpsecPeerCertIdValue |
1.3.6.1.4.1.12740.22.1.4.1.6 |
| The pre-shared key to be used during authentication.
Only applicable if the auth type is certificates. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..256) |
|
| eqlIpsecPeerNullEnc |
1.3.6.1.4.1.12740.22.1.4.1.7 |
| This specifies if null encryption is to be used.
Only applicable if the auth type is certificates or pre-shared keys. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| eqlIpsecPeerTunnelMode |
1.3.6.1.4.1.12740.22.1.4.1.8 |
| This specifies if tunnel mode is to be used with this peer. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| eqlIpsecPeerTunnelAddressIPVersion |
1.3.6.1.4.1.12740.22.1.4.1.9 |
| The Internet Protocol version the addresses are to match
against. The value of this property determines the size
and format of the spdIpHeadFiltSrcAddressBegin,
spdIpHeadFiltSrcAddressEnd,
spdIpHeadFiltDstAddressBegin, and
spdIpHeadFiltDstAddressEnd objects.
Values of unknown, ipv4z, ipv6z and dns are not legal
values for this object. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
InetAddressType |
|
|
| eqlIpsecPeerTunnelAddress |
1.3.6.1.4.1.12740.22.1.4.1.10 |
| The address of the tunnel remote end
This object is only used if tunnelMode is set to True. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
InetAddress |
|
|
| eqlIpsecPeerIkeV2 |
1.3.6.1.4.1.12740.22.1.4.1.11 |
| This specifies the IKE version to be used with this peer. If the peer talks
the other version, the IPSec session will not be established. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| eqlIpsecPeerManualKeyEncAlg |
1.3.6.1.4.1.12740.22.1.4.1.12 |
| The encryption algorithm to be used.
Only applicable if the auth type is manual keys. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), des-cbc(2), triple-des-cbc(3), cast128-cbc(6), blowfish-cbc(7), null-enc(11), aes(12), aes-ctr(13), skipjack(250) |
|
| eqlIpsecPeerManualKeyEncKeyOut |
1.3.6.1.4.1.12740.22.1.4.1.13 |
| The encryption key to be used in the outbound direction.
Specified as a hex string.
Only applicable if the auth type is manual keys. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..128) |
|
| eqlIpsecPeerManualKeyEncKeyIn |
1.3.6.1.4.1.12740.22.1.4.1.14 |
| The encryption key to be used in the inbound direction.
Specified as a hex string.
Only applicable if the auth type is manual keys. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..128) |
|
| eqlIpsecPeerManualKeyAuthAlg |
1.3.6.1.4.1.12740.22.1.4.1.15 |
| The authentication algorithm to be used.
Only applicable if the auth type is manual keys. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), sha1(1), sha256(2) |
|
| eqlIpsecPeerManualKeyAuthKeyOut |
1.3.6.1.4.1.12740.22.1.4.1.16 |
| The authentication key to be used in the outbound direction.
Specified as a string.
Only applicable if the auth type is manual keys. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..128) |
|
| eqlIpsecPeerManualKeyAuthKeyIn |
1.3.6.1.4.1.12740.22.1.4.1.17 |
| The authentication key to be used in the inbound direction.
Specified as a string.
Only applicable if the auth type is manual keys. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..128) |
|
| eqlIpsecPeerManualKeySpiOut |
1.3.6.1.4.1.12740.22.1.4.1.18 |
| The SPI to be used in the outbound direction.
Only applicable if the auth type is manual keys. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| eqlIpsecPeerManualKeySpiIn |
1.3.6.1.4.1.12740.22.1.4.1.19 |
| The SPI to be used in the inbound direction.
Only applicable if the auth type is manual keys. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| eqlIpsecPeerRowStatus |
1.3.6.1.4.1.12740.22.1.4.1.20 |
| This object indicates the conceptual status of this row.
This object may not be set to active if the requirements
of the spdIpHeadFiltType object are not met. In other
words, if the associated value columns needed by a
particular test have not been set, then attempting to
change this row to an active state will result in an
inconsistentValue error. See the spdIpHeadFiltType
object description for further details. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| eqlIpsecCertDisplayTable |
1.3.6.1.4.1.12740.22.1.5 |
| EqualLogic-Dynamic IPSec certificate display Table.
This table is used to display certificate details. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EqlIpsecCertDisplayEntry |
|
| eqlIpsecCertDisplayEntry |
1.3.6.1.4.1.12740.22.1.5.1 |
| Contents of a particular certificate instance for display. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EqlIpsecCertDisplayEntry |
|
|
| eqlIpsecCertDisplayLocal |
1.3.6.1.4.1.12740.22.1.5.1.9 |
| Boolean that indicates if this is a localm certificate or not. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
local-cert(1), root-cert(2), intermediate(3) |
|
| eqlIpsecSecAssocTable |
1.3.6.1.4.1.12740.22.1.6 |
| EqualLogic-Dynamic IPSec security association Table.
This table is used to display the security association details. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EqlIpsecSecAssocEntry |
|
| eqlIpsecSecAssocEntry |
1.3.6.1.4.1.12740.22.1.6.1 |
| Contents of a particular SA instance for display. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EqlIpsecSecAssocEntry |
|
|
| eqlIpsecSecAssocInstanceIdHigh |
1.3.6.1.4.1.12740.22.1.6.1.1 |
| This index carries the high-order 32-bit of the instance ID that identifies the IPSec security association. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| eqlIpsecSecAssocInstanceIdLow |
1.3.6.1.4.1.12740.22.1.6.1.2 |
| This index carries the low-order 32-bit of the instance ID that identifies the IPSec security association. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| eqlIpsecSecAssocEncAlg |
1.3.6.1.4.1.12740.22.1.6.1.7 |
| The encryption algorithm used. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), des-cbc(2), triple-des-cbc(3), cast128-cbc(6), blowfish-cbc(7), null-enc(11), aes(12), aes-ctr(13), skipjack(250) |
|
| eqlIpsecSecAssocAuthAlg |
1.3.6.1.4.1.12740.22.1.6.1.8 |
| The authentication algorithm used. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(0), md5-hmac(2), sha1-hmac(3), sha2-256(5), sha2-384(6), sha2-512(7), ripemd160-hmac(8), aes-xcbc-mac(9), md5(249), sha(250), null(251), tcp-md5(252) |
|
| eqlIpsecSecAssocSpi |
1.3.6.1.4.1.12740.22.1.6.1.9 |
| SPI used in the security association. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| eqlIpsecStaleSecAssocDeleteTable |
1.3.6.1.4.1.12740.22.1.7 |
| EqualLogic-Dynamic IPSec stale security association
delete Table. This table is used to indicate the
destination address and type of all security associations
to delete. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
EqlIpsecStaleSecAssocDeleteEntry |
|
| eqlIpsecStaleSecAssocDeleteEntry |
1.3.6.1.4.1.12740.22.1.7.1 |
| Contents of a particular SA instance for delete. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
EqlIpsecStaleSecAssocDeleteEntry |
|
|