EQLGROUP-MIB

File: EQLGROUP-MIB.mib (178263 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI EQUALLOGIC-SMI
INET-ADDRESS-MIB

Imported symbols

DisplayString TruthValue RowStatus
RowPointer TEXTUAL-CONVENTION MODULE-IDENTITY
OBJECT-TYPE Integer32 Unsigned32
enterprises IpAddress TimeTicks
Counter32 Counter64 equalLogic
InetAddressType InetAddress

Defined Types

UTFString  
An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC1905]. Note that the size of an SnmpAdminString object is measured in octets, not characters.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..255)  

AdminAccountPrivilegeType  
This field specifies the privilege level of the account. The default is global-admin. global-admin grants full access to the administrator. pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. volume-admin designates the administrator to have access to specific volumes within specific storage pools.
TEXTUAL-CONVENTION    
  INTEGER global-admin(0), pool-admin(1), pool-admin-group-read(2), volume-admin(3)  

AdminAccountType  
This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected. Read-only account is only applicable for group admin accounts/pool-admin accounts. Group-admins with read-only set cannot modify any settings.
TEXTUAL-CONVENTION    
  INTEGER read-write(1), read-only(2)  

EqlStorageGroupEntry  
SEQUENCE    
  eqlGroupId Integer32
  eqlGroupIsSingleSubnet INTEGER
  eqlGroupDefaultGatewayIpAddress INTEGER
  eqlGroupDefaultMask IpAddress
  eqlGroupDefaultRoutingProtocol INTEGER
  eqlGroupIsStorageOptimization INTEGER
  eqlGroupDiskAddWaitTime Integer32
  eqlGroupDefaultLanguage INTEGER
  eqlGroupDefaultSnapshotSize Integer32
  eqlGroupDefaultSnapshotWarningLevel Integer32
  eqlGroupDefaultSnapshotDeletePolicy INTEGER
  eqlGroupTimeZone INTEGER
  eqlGroupLogLevel Integer32
  eqlGroupDefaultAliasToVolumeName TruthValue
  eqlGroupDescription UTFString
  eqlGroupIscsiNamePrefix DisplayString
  eqlGroupEmailSrcDomain DisplayString
  eqlGroupName DisplayString
  eqlGroupIpAddr IpAddress
  eqlGroupEnableWebAccessSSL TruthValue
  eqlGroupEnableWebAccessUnsecure TruthValue
  eqlGroupEnableCliAccessSSH TruthValue
  eqlGroupEnableCliAccessUnsecure TruthValue
  eqlGroupEnableEmailNotifications TruthValue
  eqlGroupEnableSNMPTraps TruthValue
  eqlGroupEnableSyslog TruthValue
  eqlGroupEmailPriorityMask INTEGER
  eqlGroupSNMPPriorityMask INTEGER
  eqlGroupSysLogPriorityMask INTEGER
  eqlGroupDefaultSite DisplayString
  eqlGroupPasswd1 OCTET STRING
  eqlGroupPasswd2 DisplayString
  eqlGroupRowStatus RowStatus
  eqlGroupObjectReuseScrub INTEGER
  eqlGroupEnableSSH TruthValue
  eqlGroupEnableTelnet TruthValue
  eqlGroupEnableFTP TruthValue
  eqlGroupEmailSrcUserName DisplayString
  eqlGroupSyslogFacility INTEGER
  eqlGroupEnableCLB TruthValue
  eqlGroupEnableVolBal TruthValue
  eqlGroupDiscoveryFilter TruthValue
  eqlGroupEmailSupportContact DisplayString
  eqlGroupReplicationWindowSize Unsigned32
  eqlGroupConfigurationFlags BITS
  eqlGroupISCSIPortalGrpTag INTEGER
  eqlGroupMaxConcurrentReplicas Integer32
  eqlGroupDefaultThinWarn Unsigned32
  eqlGroupDefaultThinMaxGrow Unsigned32
  eqlGroupDefaultMgmtGatewayIpAddressType InetAddressType
  eqlGroupDefaultMgmtGatewayIpAddress InetAddress
  eqlGroupInet6AddrType InetAddressType
  eqlGroupInet6Addr InetAddress
  eqlGroupInetAddrType InetAddressType
  eqlGroupInetAddr InetAddress
  eqlGroupSupportSlowSwitch INTEGER
  eqlGroupProfileIndex Unsigned32
  eqlGroupEnableSSHProtocolV1 TruthValue
  eqlGroupEnableStandbyButton TruthValue
  eqlGroupLDAPLoginAuthEnable TruthValue
  eqlGroupApplianceDiscovery INTEGER
  eqlGroupDefaultDcbVlanId Unsigned32
  eqlGroupThermalShutdownOverride INTEGER
  eqlGroupEnableLegacyCryptos INTEGER
  eqlGroupMaxReplSegments Integer32
  eqlGroupEnableVolumeRecovery TruthValue
  eqlGroupSessionIdleTimeout Integer32
  eqlGroupSessionIdleTimeoutEnable INTEGER
  eqlGroupSessionBannerEnable INTEGER
  eqlGroupDefaultVolSnapshotBorrowEnabled TruthValue
  eqlGroupRecoveryLifeTimeEnable TruthValue
  eqlGroupRecoveryLifeTime Integer32
  eqlGroupTimeProtocol INTEGER
  eqlGroupRecoveryTrimmerFreq Integer32
  eqlGroupUpdateEnable INTEGER
  eqlGroupUpdateLast Unsigned32
  eqlGroupDefaultSectorSize INTEGER
  eqlGroupCompressionScanFreq Integer32
  eqlGroupRunCompressionScan INTEGER
  eqlGroupMonitorReminderTimestamp Unsigned32

EqlStorageGroupStatusEntry  
SEQUENCE    
  eqlStorageGroupStatusPoolSpace Integer32
  eqlStorageGroupStatusPoolSpaceUsed Integer32
  eqlStorageGroupStatusTotalMembersOnLine Integer32
  eqlStorageGroupStatusPoolSpaceReserved Integer32
  eqlStorageGroupStatusReservedSpaceInUse Integer32
  eqlStorageGroupStatusDateAndTime Unsigned32
  eqlStorageGroupStatusSnapshotsInUse Integer32
  eqlStorageGroupStatusVolumesInUse Integer32
  eqlStorageGroupStatusSnapshotsOnline Integer32
  eqlStorageGroupStatusVolumesOnline Integer32
  eqlStorageGroupStatusSnapshotCount Integer32
  eqlStorageGroupStatusVolumeCount Integer32
  eqlStorageGroupStatusMemberCount Integer32
  eqlStorageGroupStatusMembersInUse Integer32
  eqlStorageGroupStatusFreeSpace Integer32
  eqlStorageGroupStatusPoolSpaceDelegated Integer32
  eqlStorageGroupStatusDelegatedUsedSpace Integer32
  eqlStorageGroupStatusReplReserveSpace Unsigned32
  eqlStorageGroupStatusReplReserveInUse Unsigned32
  eqlStorageGroupStatusVolumeSpaceSubscribed Unsigned32
  eqlStorageGroupStatusVolumeSpaceAllocated Unsigned32
  eqlStorageGroupStatusFailbackSpace Unsigned32
  eqlStorageGroupStatusThinProvFreeSpace Integer32
  eqlStorageGroupStatusConnectionCount Integer32
  eqlStorageGroupStatusSnapReserveSpaceFree Unsigned32
  eqlStorageGroupStatusReplReserveSpaceFree Unsigned32
  eqlStorageGroupStatusGroupId OCTET STRING
  eqlStorageGroupStatusVirtualVolumeCount Unsigned32
  eqlStorageGroupStatusVirtualVolumesOnline Unsigned32
  eqlStorageGroupStatusVirtualVolumesInUse Unsigned32
  eqlStorageGroupStatusVirtualVolumeSpaceSubscribed Unsigned32
  eqlStorageGroupStatsTotalSpaceBorrowing Unsigned32
  eqlStorageGroupStatusStorageContainerCount Integer32
  eqlStorageGroupStatusStorageContainerVolumeCount Unsigned32
  eqlStorageGroupStatusStorageContainerSnapCount Unsigned32
  eqlStorageGroupStatusStorageContainerVolumesOnline Integer32
  eqlStorageGroupStatusStorageContainerSpaceReserved Counter64
  eqlStorageGroupStatusCompressedSpaceUsed Counter64
  eqlStorageGroupStatusVirtualSpaceSize Counter64
  eqlStorageGroupStatusReplicationSnapCount Unsigned32
  eqlStorageGroupStatusStorageContainerVolumesBound Integer32

EqlStorageGroupSiteEntry  
SEQUENCE    
  eqlGroupSiteIndex Integer32
  eqlGroupSiteName UTFString
  eqlGroupSiteDescription UTFString
  eqlGroupSiteContactEmail DisplayString
  eqlGroupSiteContactPhone DisplayString
  eqlGroupSiteContactMobile DisplayString
  eqlGroupSiteRowStatus RowStatus

EqlStorageGroupDnsServerEntry  
SEQUENCE    
  eqlGroupDnsServerIndex Integer32
  eqlGroupDnsServerIpAddress IpAddress
  eqlGroupDnsServerRowStatus RowStatus
  eqlGroupDnsServerInetAddressType InetAddressType
  eqlGroupDnsServerInetAddress InetAddress
  eqlGroupDnsServerConfigState INTEGER

EqlStorageGroupNtpServerEntry  
SEQUENCE    
  eqlGroupNtpServerIndex Integer32
  eqlGroupNtpServerIpAddress IpAddress
  eqlGroupNtpServerRowStatus RowStatus
  eqlGroupNtpServerPort INTEGER
  eqlGroupNtpServerInetAddressType InetAddressType
  eqlGroupNtpServerInetAddress InetAddress

EqlStorageGroupChapServerEntry  
SEQUENCE    
  eqlGroupChapServerIndex Integer32
  eqlGroupChapServerIpAddress IpAddress
  eqlGroupChapServerRowStatus RowStatus
  eqlGroupChapServerPort INTEGER
  eqlGroupChapServerRADIUSSecret OCTET STRING
  eqlGroupChapServerInetAddressType InetAddressType
  eqlGroupChapServerInetAddress InetAddress

EqlStorageGroupSMTPServerEntry  
SEQUENCE    
  eqlGroupSMTPServerIndex Integer32
  eqlGroupSMTPServerIpAddress IpAddress
  eqlGroupSMTPServerRowStatus RowStatus
  eqlGroupSMTPServerPort INTEGER
  eqlGroupSMTPServerInetAddressType InetAddressType
  eqlGroupSMTPServerInetAddress InetAddress

EqlStorageGroupSysLogServerEntry  
SEQUENCE    
  eqlGroupSysLogServerIndex Integer32
  eqlGroupSysLogServerIpAddress IpAddress
  eqlGroupSysLogServerRowStatus RowStatus
  eqlGroupSysLogServerInetAddressType InetAddressType
  eqlGroupSysLogServerInetAddress InetAddress

EqlStorageGroupAlertEmailEntry  
SEQUENCE    
  eqlGroupAlertEmailIndex Integer32
  eqlGroupAlertEmailAddress DisplayString
  eqlGroupAlertEmailRowStatus RowStatus

EqlStorageGroupAdminAccountEntry  
SEQUENCE    
  eqlStorageGroupAdminAccountIndex Integer32
  eqlStorageGroupAdminAccountRowStatus RowStatus
  eqlStorageGroupAdminAccountName DisplayString
  eqlStorageGroupAdminAccountPassword OCTET STRING
  eqlStorageGroupAdminAccountDescription UTFString
  eqlStorageGroupAdminAccountType AdminAccountType
  eqlStorageGroupAdminAccountContact DisplayString
  eqlStorageGroupAdminAccountEmail DisplayString
  eqlStorageGroupAdminAccountPhone DisplayString
  eqlStorageGroupAdminAccountMobile DisplayString
  eqlStorageGroupAdminAccountStatus INTEGER
  eqlStorageGroupAdminAccountCliFlags Integer32
  eqlStorageGroupAdminAccountGuiFlags Integer32
  eqlStorageGroupAdminAccountPollInterval Integer32
  eqlStorageGroupAdminAccountAuthType INTEGER
  eqlStorageGroupAdminAccountRecentLogin Counter32
  eqlStorageGroupAdminAccountClass DisplayString
  eqlStorageGroupAdminAccountPrivilege AdminAccountPrivilegeType
  eqlStorageGroupAdminAccountSnmpKey OCTET STRING
  eqlStorageGroupAdminAccountSnmpKey2 OCTET STRING
  eqlStorageGroupAdminAccountCHAPPassword OCTET STRING
  eqlStorageGroupAdminAccountKey Unsigned32
  eqlStorageGroupAdminAccountAdGroupName DisplayString
  eqlStorageGroupAdminAccountSNMPPrivProt INTEGER

EqlStorageGroupiSNSServerEntry  
SEQUENCE    
  eqlGroupiSNSServerIndex Integer32
  eqlGroupiSNSServerRowStatus RowStatus
  eqlGroupiSNSServerIpAddress IpAddress
  eqlGroupiSNSServerPort INTEGER
  eqlGroupiSNSServerInetAddressType InetAddressType
  eqlGroupiSNSServerInetAddress InetAddress

EqlGroupCompatibilityEntry  
SEQUENCE    
  eqlGroupCurrentCompLevel Unsigned32

EqlStorageGroupCollectionEntry  
SEQUENCE    
  eqlGrpNoofVolCollections Unsigned32
  eqlGrpNoofSnapCollections Unsigned32
  eqlGrpNoofOrphanSnapCollections Unsigned32

EqlRADIUSEntry  
SEQUENCE    
  eqlRADIUSSecret OCTET STRING
  eqlRADIUSLoginAuthEnable TruthValue
  eqlRADIUSAuthRecvTimeout Unsigned32
  eqlRADIUSAuthMaxRetries Unsigned32
  eqlRADIUSLoginAcctEnable TruthValue
  eqlRADIUSAcctRecvTimeout Unsigned32
  eqlRADIUSAcctMaxRetries Unsigned32
  eqlRADIUSiscsiAuthEnable TruthValue
  eqlLocaliscsiAuthEnable TruthValue
  eqlRADIUSRequireAdminAttrEnable TruthValue

EqlRADIUSAcctServerEntry  
SEQUENCE    
  eqlRADIUSAcctServerIndex Integer32
  eqlRADIUSAcctServerIpAddress IpAddress
  eqlRADIUSAcctServerPort INTEGER
  eqlRADIUSAcctServerRowStatus RowStatus
  eqlRADIUSAcctServerSecret OCTET STRING
  eqlRADIUSAcctServerInetAddressType InetAddressType
  eqlRADIUSAcctServerInetAddress InetAddress

EqlUserSessionEntry  
SEQUENCE    
  eqlUserSessionIndex Unsigned32
  eqlUserSessionAdminAccountIndex Integer32
  eqlUserSessionStart Counter32
  eqlUserSessionProtocol INTEGER
  eqlUserSessionRemoteAddress IpAddress
  eqlUserSessionLocalAddress IpAddress
  eqlUserSessionRemoteInetAddressType InetAddressType
  eqlUserSessionRemoteInetAddress InetAddress
  eqlUserSessionLocalInetAddressType InetAddressType
  eqlUserSessionLocalInetAddress InetAddress

EqlRecordVersionEntry  
SEQUENCE    
  eqlRecordVersionTableType Unsigned32
  eqlRecordVersionMin Unsigned32
  eqlRecordVersionMax Unsigned32

EqlGroupTaskEntry  
SEQUENCE    
  eqlGroupTaskIndex Unsigned32
  eqlGroupTaskRowStatus RowStatus
  eqlGroupTaskType INTEGER
  eqlGroupTaskContext RowPointer
  eqlGroupTaskNumSubTasks Unsigned32
  eqlGroupTaskSubTaskInProgress INTEGER
  eqlGroupTaskSubtaskStatus Unsigned32
  eqlGroupTaskStatus INTEGER
  eqlGroupTaskUserAction INTEGER
  eqlGroupTaskStartTime Counter32
  eqlGroupTaskReplication INTEGER

EqlStorageGroupProfileEntry  
SEQUENCE    
  eqlStorageGroupProfileVersion Unsigned32
  eqlStorageGroupProfileWeight Unsigned32
  eqlStorageGroupProfileMaxMembers Unsigned32
  eqlStorageGroupProfileMaxVolumes Unsigned32
  eqlStorageGroupProfileMaxSnapsPerGroup Unsigned32
  eqlStorageGroupProfileMaxSnapsPerVolume Unsigned32
  eqlStorageGroupProfileMaxReplicasPerVolume Unsigned32
  eqlStorageGroupProfileMaxReplVolumes Unsigned32
  eqlStorageGroupProfileMaxConnections Unsigned32
  eqlStorageGroupProfileMaxPartners Unsigned32
  eqlStorageGroupProfileMaxConnWarning Unsigned32
  eqlStorageGroupProfileMaxSyncReplVolumes Unsigned32

EqlStorageGroupAdminAccountKeyEntry  
SEQUENCE    
  eqlStorageGroupAdminAccountIndexValue INTEGER

EqlStorageGroupChapAccountEntry  
SEQUENCE    
  eqlStorageGroupChapAccountIndex Integer32
  eqlStorageGroupChapAccountRowStatus RowStatus
  eqlStorageGroupChapAccountAdminAccountKey Unsigned32
  eqlStorageGroupChapAccountPublic TruthValue

EqlLDAPServerEntry  
SEQUENCE    
  eqlLDAPServerIndex Integer32
  eqlLDAPServerBaseDN OCTET STRING
  eqlLDAPServerSecureProtocol INTEGER
  eqlLDAPServerInetAddressType InetAddressType
  eqlLDAPServerInetAddress InetAddress
  eqlLDAPServerPort INTEGER
  eqlLDAPServerAnonymousAccess TruthValue
  eqlLDAPServerBindDN OCTET STRING
  eqlLDAPServerBindPassword OCTET STRING
  eqlLDAPServerRowStatus RowStatus

EqlLdapLoginAccessEntry  
SEQUENCE    
  eqlLdapLoginAccessName DisplayString
  eqlLdapLoginAccessType INTEGER
  eqlLdapLoginAccessAccountPrivilege AdminAccountPrivilegeType
  eqlLdapLoginAccessAccountType AdminAccountType
  eqlLdapLoginAccessRowStatus RowStatus
  eqlLdapLoginAccessAdDomainName DisplayString

EqlStorageGroupDnsSuffixEntry  
SEQUENCE    
  eqlGroupDnsSuffixIndex Integer32
  eqlGroupDnsSuffixRowStatus RowStatus
  eqlGroupDnsSuffixString DisplayString
  eqlGroupDnsSuffixConfigState INTEGER

EqlStorageGroupSnmpEntry  
SEQUENCE    
  eqlStorageGroupSnmpRowStatus RowStatus
  eqlStorageGroupSnmpManagersList OCTET STRING
  eqlStorageGroupSnmpTrapCommunity OCTET STRING

EqlGroupSessionBannerEntry  
SEQUENCE    
  eqlGroupSessionBannerRowStatus RowStatus
  eqlGroupSessionBannerText OCTET STRING

EqlGroupSingleSignOnStatusEntry  
SEQUENCE    
  eqlGroupSingleSignOnStatus INTEGER
  eqlGroupSingleSignOnRegGroupName DisplayString
  eqlGroupSingleSignOnKrbRealm OCTET STRING

EqlNextAvailableIndexEntry  
SEQUENCE    
  eqlNextAvailableIndexTableType Unsigned32
  eqlNextAvailableIndexValue Unsigned32

EqlStorageGroupSnmpReadOnlyCommunityEntry  
SEQUENCE    
  eqlStorageGroupSnmpReadOnlyCommunity DisplayString

EqlEULAAcceptInfoEntry  
SEQUENCE    
  eqlEULAAcceptInfoFirmwareType INTEGER
  eqlEULAAcceptInfoRowStatus RowStatus
  eqlEULAAcceptInfoAccountName DisplayString
  eqlEULAAcceptInfoEULAVersion Unsigned32
  eqlEULAAcceptInfoTimestamp Unsigned32

Defined Values

eqlgroupModule 1.3.6.1.4.1.12740.1
Equallogic Inc. group information Copyright (c) 2002-2013 by Dell Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell Inc. This software embodies proprietary information and trade secrets of Dell Inc.
MODULE-IDENTITY    

eqlgroupObjects 1.3.6.1.4.1.12740.1.1
OBJECT IDENTIFIER    

eqlgroupNotifications 1.3.6.1.4.1.12740.1.2
OBJECT IDENTIFIER    

eqlgroupConformance 1.3.6.1.4.1.12740.1.3
OBJECT IDENTIFIER    

eqlStorageGroupTable 1.3.6.1.4.1.12740.1.1.1
EqualLogic-Persistent Storage Group Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupEntry

eqlStorageGroupEntry 1.3.6.1.4.1.12740.1.1.1.1
An entry (row) containing storage group information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupEntry  

eqlGroupId 1.3.6.1.4.1.12740.1.1.1.1.1
This index uniquely identifies the group. This index should always be 1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupIsSingleSubnet 1.3.6.1.4.1.12740.1.1.1.1.2
This field is used to indicate whether or not all the arrays within a group are located in the same subset. The default is single-subnet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER single-subnet(1), multi-subnet(2)  

eqlGroupDefaultGatewayIpAddress 1.3.6.1.4.1.12740.1.1.1.1.3
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

eqlGroupDefaultMask 1.3.6.1.4.1.12740.1.1.1.1.4
This field is deprecated.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eqlGroupDefaultRoutingProtocol 1.3.6.1.4.1.12740.1.1.1.1.5
This field is used to indicate the routing protocol use when a group spans multiple subnets. The support protocols are RIP and OFPS. The default value is none.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), rip(2), ospf(3)  

eqlGroupIsStorageOptimization 1.3.6.1.4.1.12740.1.1.1.1.6
This field is used to indicate whether the Storage Pool is optimized for capacity (RAID 5/50) or performance (RAID 10). The default is capacity.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER capacity(1), performance(2), raid5(3)  

eqlGroupDiskAddWaitTime 1.3.6.1.4.1.12740.1.1.1.1.7
This field is used to indicated how long to wait in minutes before including newly inserted drives into the RAID set. The delay allows for multiple drives to be inserted before the expansion begins. The default is 2 minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlGroupDefaultLanguage 1.3.6.1.4.1.12740.1.1.1.1.8
This field is deprecated.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

eqlGroupDefaultSnapshotSize 1.3.6.1.4.1.12740.1.1.1.1.9
This field is used to specify by default what percentage of a volume is reserved for SnapShots. The default is 100%. It can be overriden on a per volume basis. If a volume, testvol, is 100MB, and the GroupDefaultSnapshotsize is 100%, than 100MB will reserved for SnapShots of testvol.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlGroupDefaultSnapshotWarningLevel 1.3.6.1.4.1.12740.1.1.1.1.10
This field is used to specify by default when the administrator is warned that the space used for SnapShots close to being exhausted. The default is 20%. It can be overriden on a per volume basis.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

eqlGroupDefaultSnapshotDeletePolicy 1.3.6.1.4.1.12740.1.1.1.1.11
This field specifies what should happen when the space reserved for SnapShots is exhuasted. The default is delete-oldest SnapShot.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER make-volume-offline(1), delete-oldest(2), stop-snapshots(3)  

eqlGroupTimeZone 1.3.6.1.4.1.12740.1.1.1.1.13
The field specifies the default timezone for the group HST (GMT-10:00) Hawaiian Standard Time: Pacific/Honolulu, AST (GMT-09:00) Alaskan Standard Time: America/Anchorage, PST (GMT-08:00) Pacific Standard Time: America/Los_Angeles, PNT (GMT-07:00) America/Phoenix, MST (GMT-07:00) US Mountain Standard Time: America/Denver, CST (GMT-06:00) Central Standard Time: America/Chicago, EST (GMT-05:00) Eastern Standard Time: America/New_York, IET (GMT-05:00) America/Indiana/Indianapolis, PRT (GMT-04:00) Atlantic Standard Time: America/Halifax, GMT (GMT-00:00) Greenwich Mean Time: GMT, ECT (GMT+01:00) Romance Standard Time: Europe/Paris, EET (GMT+02:00) Egypt Standard Time: Africa/Cairo, EAT (GMT+03:00) Saudi Arabia Standard Time: Asia/Riyadh, MET (GMT+03:30) Iran Standard Time: Asia/Tehran, NET (GMT+04:00) Arabian Standard Time: Asia/Yerevan, PLT (GMT+05:00) West Asia Standard Time: Asia/Karachi, IST (GMT+05:30) India Standard Time: Asia/Calcutta, BST (GMT+06:00) Central Asia Standard Time: Asia/Dacca, VST (GMT+07:00) Bangkok Standard Time: Asia/Bangkok, CTT (GMT+08:00) China Standard Time: Asia/Shanghai, JST (GMT+09:00) Tokyo Standard Time: Asia/Tokyo, ACT (GMT+09:30) Cen. Australia Standard Time: Australia/Darwin, AET (GMT+10:00) Sydney Standard Time: Australia/Sydney, SST (GMT+11:00) Central Pacific Standard Time: Pacific/Guadalcanal, NST (GMT+12:00) New Zealand Standard Time: Pacific/Fiji, MIT (GMT+13:00) Samoa Standard Time: Pacific/Apia, CNT (GMT-03:30) Newfoundland Standard Time: America/St_Johns, AGT (GMT-03:00) SA Eastern Standard Time: America/Buenos_Aires, BET (GMT-03:00) E South America Standard Time: America/Sao_Paulo, CAT (GMT-01:00) Azores Standard Time: Atlantic/Cape_Verde, Europe/Andorra, Asia/Dubai, Asia/Kabul, America/Antigua, America/Anguilla, Europe/Tirane, Asia/Yerevan, America/Curacao, Africa/Luanda, Antarctica/McMurdo, Antarctica/South_Pole, Antarctica/Rothera, Antarctica/Palmer, Antarctica/Mawson, Antarctica/Davis, Antarctica/Casey, Antarctica/Vostok, Antarctica/DumontDUrville, Antarctica/Syowa, America/Argentina/Buenos_Aires, America/Argentina/Cordoba, America/Argentina/Jujuy, America/Argentina/Tucuman, America/Argentina/Catamarca, America/Argentina/La_Rioja, America/Argentina/San_Juan, America/Argentina/Mendoza, America/Argentina/Rio_Gallegos, America/Argentina/Ushuaia, Pacific/Pago_Pago, Europe/Vienna, Australia/Lord_Howe, Australia/Hobart, Australia/Currie, Australia/Melbourne, Australia/Sydney, Australia/Broken_Hill, Australia/Brisbane, Australia/Lindeman, Australia/Adelaide, Australia/Darwin, Australia/Perth, America/Aruba, Europe/Mariehamn, Asia/Baku, Europe/Sarajevo, America/Barbados, Asia/Dhaka, Europe/Brussels, Africa/Ouagadougou, Europe/Sofia, Asia/Bahrain, Africa/Bujumbura, Africa/Porto-Novo, Atlantic/Bermuda, Asia/Brunei, America/La_Paz, America/Noronha, America/Belem, America/Fortaleza, America/Recife, America/Araguaina, America/Maceio, America/Bahia, America/Sao_Paulo, America/Campo_Grande, America/Cuiaba, America/Porto_Velho, America/Boa_Vista, America/Manaus, America/Eirunepe, America/Rio_Branco, America/Nassau, Asia/Thimphu, Africa/Gaborone, Europe/Minsk, America/Belize, America/St_Johns, America/Halifax, America/Glace_Bay, America/Moncton, America/Goose_Bay, America/Blanc-Sablon, America/Montreal, America/Toronto, America/Nipigon, America/Thunder_Bay, America/Pangnirtung, America/Iqaluit, America/Atikokan, America/Rankin_Inlet, America/Winnipeg, America/Rainy_River, America/Cambridge_Bay, America/Regina, America/Swift_Current, America/Edmonton, America/Yellowknife, America/Inuvik, America/Dawson_Creek, America/Vancouver, America/Whitehorse, America/Dawson, Indian/Cocos, Africa/Kinshasa, Africa/Lubumbashi, Africa/Bangui, Africa/Brazzaville, Europe/Zurich, Africa/Abidjan, Pacific/Rarotonga, America/Santiago, Pacific/Easter, Africa/Douala, Asia/Shanghai, Asia/Harbin, Asia/Chongqing, Asia/Urumqi, Asia/Kashgar, America/Bogota, America/Costa_Rica, America/Havana, Atlantic/Cape_Verde, Indian/Christmas, Asia/Nicosia, Europe/Prague, Europe/Berlin, Africa/Djibouti, Europe/Copenhagen, America/Dominica, America/Santo_Domingo, Africa/Algiers, America/Guayaquil, Pacific/Galapagos, Europe/Tallinn, Africa/Cairo, Africa/El_Aaiun, Africa/Asmara, Europe/Madrid, Africa/Ceuta, Atlantic/Canary, Africa/Addis_Ababa, Europe/Helsinki, Pacific/Fiji, Atlantic/Stanley, Pacific/Truk, Pacific/Ponape, Pacific/Kosrae, Atlantic/Faroe, Europe/Paris, Africa/Libreville, Europe/London, America/Grenada, Asia/Tbilisi, America/Cayenne, Europe/Guernsey, Africa/Accra, Europe/Gibraltar, America/Godthab, America/Danmarkshavn, America/Scoresbysund, America/Thule, Africa/Banjul, Africa/Conakry, America/Guadeloupe, Africa/Malabo, Europe/Athens, Atlantic/South_Georgia, America/Guatemala, Pacific/Guam, Africa/Bissau, America/Guyana, Asia/Hong_Kong, America/Tegucigalpa, Europe/Zagreb, America/Port-au-Prince, Europe/Budapest, Asia/Jakarta, Asia/Pontianak, Asia/Makassar, Asia/Jayapura, Europe/Dublin, Asia/Jerusalem, Europe/Isle_of_Man, Asia/Calcutta, Indian/Chagos, Asia/Baghdad, Asia/Tehran, Atlantic/Reykjavik, Europe/Rome, Europe/Jersey, America/Jamaica, Asia/Amman, Asia/Tokyo, Africa/Nairobi, Asia/Bishkek, Asia/Phnom_Penh, Pacific/Tarawa, Pacific/Enderbury, Pacific/Kiritimati, Indian/Comoro, America/St_Kitts, Asia/Pyongyang, Asia/Seoul, Asia/Kuwait, America/Cayman, Asia/Almaty, Asia/Qyzylorda, Asia/Aqtobe, Asia/Aqtau, Asia/Oral, Asia/Vientiane, Asia/Beirut, America/St_Lucia, Europe/Vaduz, Asia/Colombo, Africa/Monrovia, Africa/Maseru, Europe/Vilnius, Europe/Luxembourg, Europe/Riga, Africa/Tripoli, Africa/Casablanca, Europe/Monaco, Europe/Chisinau, Europe/Podgorica, Indian/Antananarivo, Pacific/Majuro, Pacific/Kwajalein, Europe/Skopje, Africa/Bamako, Asia/Rangoon, Asia/Ulaanbaatar, Asia/Hovd, Asia/Choibalsan, Asia/Macau, Pacific/Saipan, America/Martinique, Africa/Nouakchott, America/Montserrat, Europe/Malta, Indian/Mauritius, Indian/Maldives, Africa/Blantyre, America/Mexico_City, America/Cancun, America/Merida, America/Monterrey, America/Mazatlan, America/Chihuahua, America/Hermosillo, America/Tijuana, Asia/Kuala_Lumpur, Asia/Kuching, Africa/Maputo, Africa/Windhoek, Pacific/Noumea, Africa/Niamey, Pacific/Norfolk, Africa/Lagos, America/Managua, Europe/Amsterdam, Europe/Oslo, Asia/Katmandu, Pacific/Nauru, Pacific/Niue, Pacific/Auckland, Pacific/Chatham, Asia/Muscat, America/Panama, America/Lima, Pacific/Tahiti, Pacific/Marquesas, Pacific/Gambier, Pacific/Port_Moresby, Asia/Manila, Asia/Karachi, Europe/Warsaw, America/Miquelon, Pacific/Pitcairn, America/Puerto_Rico, Asia/Gaza, Europe/Lisbon, Atlantic/Madeira, Atlantic/Azores, Pacific/Palau, America/Asuncion, Asia/Qatar, Indian/Reunion, Europe/Bucharest, Europe/Belgrade, Europe/Kaliningrad, Europe/Moscow, Europe/Volgograd, Europe/Samara, Asia/Yekaterinburg, Asia/Omsk, Asia/Novosibirsk, Asia/Krasnoyarsk, Asia/Irkutsk, Asia/Yakutsk, Asia/Vladivostok, Asia/Sakhalin, Asia/Magadan, Asia/Kamchatka, Asia/Anadyr, Africa/Kigali, Asia/Riyadh, Pacific/Guadalcanal, Indian/Mahe, Africa/Khartoum, Europe/Stockholm, Asia/Singapore, Atlantic/St_Helena, Europe/Ljubljana, Arctic/Longyearbyen, Atlantic/Jan_Mayen, Europe/Bratislava, Africa/Freetown, Europe/San_Marino, Africa/Dakar, Africa/Mogadishu, America/Paramaribo, Africa/Sao_Tome, America/El_Salvador, Asia/Damascus, Africa/Mbabane, America/Grand_Turk, Africa/Ndjamena, Indian/Kerguelen, Africa/Lome, Asia/Bangkok, Asia/Dushanbe, Pacific/Fakaofo, Asia/Dili, Asia/Ashgabat, Africa/Tunis, Pacific/Tongatapu, Europe/Istanbul, America/Port_of_Spain, Pacific/Funafuti, Asia/Taipei, Africa/Dar_es_Salaam, Europe/Kiev, Europe/Uzhgorod, Europe/Zaporozhye, Europe/Simferopol, Africa/Kampala, Pacific/Johnston, Pacific/Midway, Pacific/Wake, America/New_York, America/Detroit, America/Kentucky/Louisville, America/Kentucky/Monticello, America/Indiana/Indianapolis, America/Indiana/Marengo, America/Indiana/Knox, America/Indiana/Vevay, America/Chicago, America/Indiana/Vincennes, America/Indiana/Petersburg, America/Menominee, America/North_Dakota/Center, America/North_Dakota/New_Salem, America/Denver, America/Boise, America/Shiprock, America/Phoenix, America/Los_Angeles, America/Anchorage, America/Juneau, America/Yakutat, America/Nome, America/Adak, Pacific/Honolulu, America/Montevideo, Asia/Samarkand, Asia/Tashkent, Europe/Vatican, America/St_Vincent, America/Caracas, America/Tortola, America/St_Thomas, Asia/Saigon, Pacific/Efate, Pacific/Wallis, Pacific/Apia, Asia/Aden, Indian/Mayotte, Africa/Johannesburg, Africa/Lusaka, Africa/Harare, Australia/Eucla, America/Indiana/Tell_City, America/Indiana/Winamac, America/Resolute, America/Marigot, Asia/Kolkata, Asia/Ho_Chi_Minh, America/St_Barthelemy, America/Argentina/San_Luis, America/Santarem, America/Argentina/Salta, Asia/Kathmandu, America/Ojinaga, America/Santa_Isabel, Asia/Novokuznetsk, America/Matamoros, Antarctica/Macquarie, America/Bahia_Banderas, Pacific/Pohnpei, Pacific/Chuuk, America/North_Dakota/Beulah, America/Metlakatla, America/Sitka, America/Kralendijk, America/Lower_Princes, Africa/Juba, Asia/Hebron, Europe/Tiraspol, America/Creston, Asia/Khandyga, Europe/Busingen, Asia/Ust-Nera
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hst(1), ast(2), pst(3), pnt(4), mst(5), cst(6), est(7), iet(8), prt(9), gmt(10), ect(11), eet(12), eat(13), met(14), net(15), plt(16), ist(17), bst(18), vst(19), ctt(20), jst(21), act(22), aet(23), sst(24), nst(25), mit(26), cnt(27), agt(28), bet(29), cat(30), europe-Andorra(31), asia-Dubai(32), asia-Kabul(33), america-Antigua(34), america-Anguilla(35), europe-Tirane(36), asia-Yerevan(37), america-Curacao(38), africa-Luanda(39), antarctica-McMurdo(40), antarctica-South-Pole(41), antarctica-Rothera(42), antarctica-Palmer(43), antarctica-Mawson(44), antarctica-Davis(45), antarctica-Casey(46), antarctica-Vostok(47), antarctica-DumontDUrville(48), antarctica-Syowa(49), america-Argentina-Buenos-Aires(50), america-Argentina-Cordoba(51), america-Argentina-Jujuy(52), america-Argentina-Tucuman(53), america-Argentina-Catamarca(54), america-Argentina-La-Rioja(55), america-Argentina-San-Juan(56), america-Argentina-Mendoza(57), america-Argentina-Rio-Gallegos(58), america-Argentina-Ushuaia(59), pacific-Pago-Pago(60), europe-Vienna(61), australia-Lord-Howe(62), australia-Hobart(63), australia-Currie(64), australia-Melbourne(65), australia-Sydney(66), australia-Broken-Hill(67), australia-Brisbane(68), australia-Lindeman(69), australia-Adelaide(70), australia-Darwin(71), australia-Perth(72), america-Aruba(73), europe-Mariehamn(74), asia-Baku(75), europe-Sarajevo(76), america-Barbados(77), asia-Dhaka(78), europe-Brussels(79), africa-Ouagadougou(80), europe-Sofia(81), asia-Bahrain(82), africa-Bujumbura(83), africa-Porto-Novo(84), atlantic-Bermuda(85), asia-Brunei(86), america-La-Paz(87), america-Noronha(88), america-Belem(89), america-Fortaleza(90), america-Recife(91), america-Araguaina(92), america-Maceio(93), america-Bahia(94), america-Sao-Paulo(95), america-Campo-Grande(96), america-Cuiaba(97), america-Porto-Velho(98), america-Boa-Vista(99), america-Manaus(100), america-Eirunepe(101), america-Rio-Branco(102), america-Nassau(103), asia-Thimphu(104), africa-Gaborone(105), europe-Minsk(106), america-Belize(107), america-St-Johns(108), america-Halifax(109), america-Glace-Bay(110), america-Moncton(111), america-Goose-Bay(112), america-Blanc-Sablon(113), america-Montreal(114), america-Toronto(115), america-Nipigon(116), america-Thunder-Bay(117), america-Pangnirtung(118), america-Iqaluit(119), america-Atikokan(120), america-Rankin-Inlet(121), america-Winnipeg(122), america-Rainy-River(123), america-Cambridge-Bay(124), america-Regina(125), america-Swift-Current(126), america-Edmonton(127), america-Yellowknife(128), america-Inuvik(129), america-Dawson-Creek(130), america-Vancouver(131), america-Whitehorse(132), america-Dawson(133), indian-Cocos(134), africa-Kinshasa(135), africa-Lubumbashi(136), africa-Bangui(137), africa-Brazzaville(138), europe-Zurich(139), africa-Abidjan(140), pacific-Rarotonga(141), america-Santiago(142), pacific-Easter(143), africa-Douala(144), asia-Shanghai(145), asia-Harbin(146), asia-Chongqing(147), asia-Urumqi(148), asia-Kashgar(149), america-Bogota(150), america-Costa-Rica(151), america-Havana(152), atlantic-Cape-Verde(153), indian-Christmas(154), asia-Nicosia(155), europe-Prague(156), europe-Berlin(157), africa-Djibouti(158), europe-Copenhagen(159), america-Dominica(160), america-Santo-Domingo(161), africa-Algiers(162), america-Guayaquil(163), pacific-Galapagos(164), europe-Tallinn(165), africa-Cairo(166), africa-El-Aaiun(167), africa-Asmara(168), europe-Madrid(169), africa-Ceuta(170), atlantic-Canary(171), africa-Addis-Ababa(172), europe-Helsinki(173), pacific-Fiji(174), atlantic-Stanley(175), pacific-Truk(176), pacific-Ponape(177), pacific-Kosrae(178), atlantic-Faroe(179), europe-Paris(180), africa-Libreville(181), europe-London(182), america-Grenada(183), asia-Tbilisi(184), america-Cayenne(185), europe-Guernsey(186), africa-Accra(187), europe-Gibraltar(188), america-Godthab(189), america-Danmarkshavn(190), america-Scoresbysund(191), america-Thule(192), africa-Banjul(193), africa-Conakry(194), america-Guadeloupe(195), africa-Malabo(196), europe-Athens(197), atlantic-South-Georgia(198), america-Guatemala(199), pacific-Guam(200), africa-Bissau(201), america-Guyana(202), asia-Hong-Kong(203), america-Tegucigalpa(204), europe-Zagreb(205), america-Port-au-Prince(206), europe-Budapest(207), asia-Jakarta(208), asia-Pontianak(209), asia-Makassar(210), asia-Jayapura(211), europe-Dublin(212), asia-Jerusalem(213), europe-Isle-of-Man(214), asia-Calcutta(215), indian-Chagos(216), asia-Baghdad(217), asia-Tehran(218), atlantic-Reykjavik(219), europe-Rome(220), europe-Jersey(221), america-Jamaica(222), asia-Amman(223), asia-Tokyo(224), africa-Nairobi(225), asia-Bishkek(226), asia-Phnom-Penh(227), pacific-Tarawa(228), pacific-Enderbury(229), pacific-Kiritimati(230), indian-Comoro(231), america-St-Kitts(232), asia-Pyongyang(233), asia-Seoul(234), asia-Kuwait(235), america-Cayman(236), asia-Almaty(237), asia-Qyzylorda(238), asia-Aqtobe(239), asia-Aqtau(240), asia-Oral(241), asia-Vientiane(242), asia-Beirut(243), america-St-Lucia(244), europe-Vaduz(245), asia-Colombo(246), africa-Monrovia(247), africa-Maseru(248), europe-Vilnius(249), europe-Luxembourg(250), europe-Riga(251), africa-Tripoli(252), africa-Casablanca(253), europe-Monaco(254), europe-Chisinau(255), europe-Podgorica(256), indian-Antananarivo(257), pacific-Majuro(258), pacific-Kwajalein(259), europe-Skopje(260), africa-Bamako(261), asia-Rangoon(262), asia-Ulaanbaatar(263), asia-Hovd(264), asia-Choibalsan(265), asia-Macau(266), pacific-Saipan(267), america-Martinique(268), africa-Nouakchott(269), america-Montserrat(270), europe-Malta(271), indian-Mauritius(272), indian-Maldives(273), africa-Blantyre(274), america-Mexico-City(275), america-Cancun(276), america-Merida(277), america-Monterrey(278), america-Mazatlan(279), america-Chihuahua(280), america-Hermosillo(281), america-Tijuana(282), asia-Kuala-Lumpur(283), asia-Kuching(284), africa-Maputo(285), africa-Windhoek(286), pacific-Noumea(287), africa-Niamey(288), pacific-Norfolk(289), africa-Lagos(290), america-Managua(291), europe-Amsterdam(292), europe-Oslo(293), asia-Katmandu(294), pacific-Nauru(295), pacific-Niue(296), pacific-Auckland(297), pacific-Chatham(298), asia-Muscat(299), america-Panama(300), america-Lima(301), pacific-Tahiti(302), pacific-Marquesas(303), pacific-Gambier(304), pacific-Port-Moresby(305), asia-Manila(306), asia-Karachi(307), europe-Warsaw(308), america-Miquelon(309), pacific-Pitcairn(310), america-Puerto-Rico(311), asia-Gaza(312), europe-Lisbon(313), atlantic-Madeira(314), atlantic-Azores(315), pacific-Palau(316), america-Asuncion(317), asia-Qatar(318), indian-Reunion(319), europe-Bucharest(320), europe-Belgrade(321), europe-Kaliningrad(322), europe-Moscow(323), europe-Volgograd(324), europe-Samara(325), asia-Yekaterinburg(326), asia-Omsk(327), asia-Novosibirsk(328), asia-Krasnoyarsk(329), asia-Irkutsk(330), asia-Yakutsk(331), asia-Vladivostok(332), asia-Sakhalin(333), asia-Magadan(334), asia-Kamchatka(335), asia-Anadyr(336), africa-Kigali(337), asia-Riyadh(338), pacific-Guadalcanal(339), indian-Mahe(340), africa-Khartoum(341), europe-Stockholm(342), asia-Singapore(343), atlantic-St-Helena(344), europe-Ljubljana(345), arctic-Longyearbyen(346), atlantic-Jan-Mayen(347), europe-Bratislava(348), africa-Freetown(349), europe-San-Marino(350), africa-Dakar(351), africa-Mogadishu(352), america-Paramaribo(353), africa-Sao-Tome(354), america-El-Salvador(355), asia-Damascus(356), africa-Mbabane(357), america-Grand-Turk(358), africa-Ndjamena(359), indian-Kerguelen(360), africa-Lome(361), asia-Bangkok(362), asia-Dushanbe(363), pacific-Fakaofo(364), asia-Dili(365), asia-Ashgabat(366), africa-Tunis(367), pacific-Tongatapu(368), europe-Istanbul(369), america-Port-of-Spain(370), pacific-Funafuti(371), asia-Taipei(372), africa-Dar-es-Salaam(373), europe-Kiev(374), europe-Uzhgorod(375), europe-Zaporozhye(376), europe-Simferopol(377), africa-Kampala(378), pacific-Johnston(379), pacific-Midway(380), pacific-Wake(381), america-New-York(382), america-Detroit(383), america-Kentucky-Louisville(384), america-Kentucky-Monticello(385), america-Indiana-Indianapolis(386), america-Indiana-Marengo(387), america-Indiana-Knox(388), america-Indiana-Vevay(389), america-Chicago(390), america-Indiana-Vincennes(391), america-Indiana-Petersburg(392), america-Menominee(393), america-North-Dakota-Center(394), america-North-Dakota-New-Salem(395), america-Denver(396), america-Boise(397), america-Shiprock(398), america-Phoenix(399), america-Los-Angeles(400), america-Anchorage(401), america-Juneau(402), america-Yakutat(403), america-Nome(404), america-Adak(405), pacific-Honolulu(406), america-Montevideo(407), asia-Samarkand(408), asia-Tashkent(409), europe-Vatican(410), america-St-Vincent(411), america-Caracas(412), america-Tortola(413), america-St-Thomas(414), asia-Saigon(415), pacific-Efate(416), pacific-Wallis(417), pacific-Apia(418), asia-Aden(419), indian-Mayotte(420), africa-Johannesburg(421), africa-Lusaka(422), africa-Harare(423), australia-Eucla(424), america-Indiana-Tell-City(425), america-Indiana-Winamac(426), america-Resolute(427), america-Marigot(428), asia-Kolkata(429), asia-Ho-Chi-Minh(430), america-St-Barthelemy(431), america-Argentina-San-Luis(432), america-Santarem(433), america-Argentina-Salta(434), asia-Kathmandu(435), america-Ojinaga(436), america-Santa-Isabel(437), asia-Novokuznetsk(438), america-Matamoros(439), antarctica-Macquarie(440), america-Bahia-Banderas(441), pacific-Pohnpei(442), pacific-Chuuk(443), america-North-Dakota-Beulah(444), america-Metlakatla(445), america-Sitka(446), america-Kralendijk(447), america-Lower-Princes(448), africa-Juba(449), asia-Hebron(450), europe-Tiraspol(451), america-Creston(452), asia-Khandyga(453), europe-Busingen(454), asia-Ust-Nera(455)  

eqlGroupLogLevel 1.3.6.1.4.1.12740.1.1.1.1.14
This field specifies the loglevel for the group. The log level determines which messages are written to the console. The following levels are supported. The value of this object will be an OR of the values associated with each level. LEVEL VALUE ------- ------- INFO 0x04 WARNING 0x08 ERROR 0x10 FATAL 0x20 DIAG 0x40 AUDIT 0x80 Default value is INFO|WARNING|ERROR|FATAL = 0x04|0x08|0x10|0x20| = 0x3c = 60
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlGroupDescription 1.3.6.1.4.1.12740.1.1.1.1.15
This field contains a use supplied description for the group. There is no default.
Status: current Access: read-write
OBJECT-TYPE    
  UTFString Size(0..64)  

eqlGroupIscsiNamePrefix 1.3.6.1.4.1.12740.1.1.1.1.16
This field specifies the prefix for the iSCSI target names. The default is iqn.2001-04.com.equallogic. This can be overriden on a per volume basis. However the name must conform to the iSCSI Specification.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlGroupDefaultAliasToVolumeName 1.3.6.1.4.1.12740.1.1.1.1.17
This field specifies whether or not to default the iSCSI alias to the name of the volume. This can be overriden on a per volume basis. The default is to set the iSCSI alias to the volume name.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEmailSrcDomain 1.3.6.1.4.1.12740.1.1.1.1.18
This field specifies the SNMP domain name used in the FROM email address in generated email. e.g., everything after @ in foo@equallogic.com .
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

eqlGroupName 1.3.6.1.4.1.12740.1.1.1.1.19
This field specifies the Well Known Name for the group. It must be a name which is resolvable by DNS. There is no default for Group Name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlGroupIpAddr 1.3.6.1.4.1.12740.1.1.1.1.20
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eqlGroupEnableWebAccessSSL 1.3.6.1.4.1.12740.1.1.1.1.21
This field specifies whether or not to allow web access to the group using https. The default is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableWebAccessUnsecure 1.3.6.1.4.1.12740.1.1.1.1.22
This field specifies whether or not to allow web access to the group using http. The default is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableCliAccessSSH 1.3.6.1.4.1.12740.1.1.1.1.23
This field specifies whether or not to allow ssh access to the group. The default is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableCliAccessUnsecure 1.3.6.1.4.1.12740.1.1.1.1.24
This field specifies whether or not to allow telnet access to the group. The default is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableEmailNotifications 1.3.6.1.4.1.12740.1.1.1.1.25
This field is used to specify whether to notify administrators on alarms via email. The default is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableSNMPTraps 1.3.6.1.4.1.12740.1.1.1.1.26
This field is used to specify whether to notify administrators on alarms via SNMP TRAPS. The default is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableSyslog 1.3.6.1.4.1.12740.1.1.1.1.27
This field is used to specify whether to notify administrators on alarms via syslog. The default is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEmailPriorityMask 1.3.6.1.4.1.12740.1.1.1.1.28
This field is used to configure the type of events to be sent in email notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type of event can be specified by adding the correspodning values. Ex: To specify warning,error,fatal the value can be set to 8+16+32 = 56. Setting this field to zero results in sending no events using email notification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

eqlGroupSNMPPriorityMask 1.3.6.1.4.1.12740.1.1.1.1.29
This field is currently not being used.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER  

eqlGroupSysLogPriorityMask 1.3.6.1.4.1.12740.1.1.1.1.30
This field is used to configure the type of events to be sent in syslog notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type of event can be specified by adding the correspodning values. Ex: To specify warning,error,fatal the value can be set to 8+16+32 = 56. Setting this field to zero results in sending no events using syslog notification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

eqlGroupDefaultSite 1.3.6.1.4.1.12740.1.1.1.1.31
This field specifies the site where the volume resides. Sites are defined on a per array basis. Sites are used to define where primary and secondary copies of volume mirror reside. The default is the default site. This means that the location of the volume is unrestricted.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlGroupPasswd1 1.3.6.1.4.1.12740.1.1.1.1.32
An octet string containing the password to authenticate members joining the group. If written, it changes the password for the account. If read, it returns a zero-length string.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlGroupPasswd2 1.3.6.1.4.1.12740.1.1.1.1.33
This field is deprecated.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlGroupRowStatus 1.3.6.1.4.1.12740.1.1.1.1.34
Rowstatus
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

eqlGroupObjectReuseScrub 1.3.6.1.4.1.12740.1.1.1.1.35
If enabled, an object is zeroed out before reuse so that the new entity using the object will not be aware of the old contents of the object. This field is deprecated and is unsupported from 7.0.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

eqlGroupEnableSSH 1.3.6.1.4.1.12740.1.1.1.1.36
This field is deprecated and will be unsupported in the next release.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableTelnet 1.3.6.1.4.1.12740.1.1.1.1.37
This field is deprecated and will be unsupported in the next release.
Status: deprecated Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableFTP 1.3.6.1.4.1.12740.1.1.1.1.38
This field specifies whether or not to allow ftp access to the group. The default is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEmailSrcUserName 1.3.6.1.4.1.12740.1.1.1.1.39
This field specifies user portion of the FROM email address used in generated email. e.g., everything before @ in foo@equallogic.com .
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

eqlGroupSyslogFacility 1.3.6.1.4.1.12740.1.1.1.1.40
This field specifies the facility code which you would like applied to all eqllog messages that are targeted at syslog.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), kern(1), user(2), mail(3), daemon(4), auth(5), syslog(6), lpr(7), news(8), uucp(9), cron(10), authpriv(11), ftp(12), local0(17), local1(18), local2(19), local3(20), local4(21), local5(22), local6(23), local7(24)  

eqlGroupEnableCLB 1.3.6.1.4.1.12740.1.1.1.1.41
This field specifies whether or not to turn on Connection Load balancer. The default is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableVolBal 1.3.6.1.4.1.12740.1.1.1.1.42
This field specifies whether or not to turn on volume balancing. The default is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupDiscoveryFilter 1.3.6.1.4.1.12740.1.1.1.1.43
If set to true, the list of volumes returned during discovery is filtered based on chap configuration in volume ACLs. The default is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEmailSupportContact 1.3.6.1.4.1.12740.1.1.1.1.44
This field specifies the customer email address for support to contact in the event of a system failure. Configuring this field will enable each member to send an e-mail to this address and customer support in the event of a critical hardware failure.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

eqlGroupReplicationWindowSize 1.3.6.1.4.1.12740.1.1.1.1.45
This field specifies the receiving window size of the tcp connection established to secondary site during replication data transfer. Minimum value is 72KB.Maximum value is 2048KB.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlGroupConfigurationFlags 1.3.6.1.4.1.12740.1.1.1.1.46
This field defines the common place holder for group wide configuration flag. The flags must be of type enable(1) or disable(0). and the default value will always be disable(0).
Status: current Access: read-create
OBJECT-TYPE    
  BITS cluster-pr-flag(0), ignore-group-conn(1), array-restart-flag(2), repl-use-jumbos(3), force-SCSI-QErr-OldBehavior(4), dcb-disable(5), lldp-vlanidneg-disable(6), mpio-dynamic-scaling-mask0(7), unmap-disable(8), mpio-dynamic-scaling-mask1(9), volume-fix-run(10), sacl-disable(11), flag12(12), flag13(13), flag14(14), flag15(15), flag16(16), flag17(17), flag18(18), flag19(19), flag20(20), flag21(21), flag22(22), flag23(23), flag24(24), flag25(25), flag26(26), flag27(27), flag28(28), flag29(29), flag30(30), flag31(31)  

eqlGroupISCSIPortalGrpTag 1.3.6.1.4.1.12740.1.1.1.1.47
A flag used internally by the iSCSI subsystem to determine the upgrade history of this storage group and infer the default iSCSI Target Portal Group ID. This value is changed internally by the group management daemon as members are added or upgraded such that the value is non zero if any group member has been previously configured with firmware prior to 2.3.6
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notConfigured(0), configuredAndSetToZero(8), configuredAndSetToOne(9)  

eqlGroupMaxConcurrentReplicas 1.3.6.1.4.1.12740.1.1.1.1.48
This field specifies the maximum number of replications that are transferring data at one time. The minimum value is 1, the maximum value is 16, and the default value is 16.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlGroupDefaultThinWarn 1.3.6.1.4.1.12740.1.1.1.1.49
The default eqliscsiVolumeThinWarnPercentage value used when creating thin provisoned volumes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

eqlGroupDefaultThinMaxGrow 1.3.6.1.4.1.12740.1.1.1.1.50
The default eqliscsiVolumeThinMaxGrowPercentage value used when creating thin provisoned volumes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

eqlGroupDefaultMgmtGatewayIpAddressType 1.3.6.1.4.1.12740.1.1.1.1.51
This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

eqlGroupDefaultMgmtGatewayIpAddress 1.3.6.1.4.1.12740.1.1.1.1.52
This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

eqlGroupInet6AddrType 1.3.6.1.4.1.12740.1.1.1.1.53
This field specifies the type of the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

eqlGroupInet6Addr 1.3.6.1.4.1.12740.1.1.1.1.54
This field specifies the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group. There is no default value for this field.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

eqlGroupInetAddrType 1.3.6.1.4.1.12740.1.1.1.1.55
This field specifies the type of the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

eqlGroupInetAddr 1.3.6.1.4.1.12740.1.1.1.1.56
This field specifies the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group. There is no default value for this field.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

eqlGroupSupportSlowSwitch 1.3.6.1.4.1.12740.1.1.1.1.57
This field is used to indicate the slow switch support for the group.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), automatic(1), on(2)  

eqlGroupProfileIndex 1.3.6.1.4.1.12740.1.1.1.1.58
This field represents the profile identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

eqlGroupEnableSSHProtocolV1 1.3.6.1.4.1.12740.1.1.1.1.59
This field specifies whether or not the SSH service should support the V1 Protocol. The default is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupEnableStandbyButton 1.3.6.1.4.1.12740.1.1.1.1.60
This field specifies if the standby button on the Pirates/Porfidio enclosures will be enabled/disabled. The default is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupLDAPLoginAuthEnable 1.3.6.1.4.1.12740.1.1.1.1.61
This field enables LDAP login authentication.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupApplianceDiscovery 1.3.6.1.4.1.12740.1.1.1.1.62
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER discover(0)  

eqlGroupDefaultDcbVlanId 1.3.6.1.4.1.12740.1.1.1.1.63
Default VLAN ID for DCB control packets on interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4095  

eqlGroupThermalShutdownOverride 1.3.6.1.4.1.12740.1.1.1.1.64
This field specifies whether thermal shutdownn override is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

eqlGroupEnableLegacyCryptos 1.3.6.1.4.1.12740.1.1.1.1.65
This field specifies whether legacy crypto protocols should be enabled or not. This affects what protocols should be supported by applications such as SSH server, HTTPS server, LDAP client, SNMPv3 agent, etc.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

eqlGroupMaxReplSegments 1.3.6.1.4.1.12740.1.1.1.1.66
This field specifies the maximum number of replica segments of 256K size per volume that are transferring data at one time. The minimum value is 1, the maximum value is 60, and the default value is 60.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlGroupEnableVolumeRecovery 1.3.6.1.4.1.12740.1.1.1.1.67
This field specifies whether or not the recoverable volume feature is enabled. The default value is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupSessionIdleTimeout 1.3.6.1.4.1.12740.1.1.1.1.68
This is the number of minutes a session may remain idle before being logged out for inactivty. The maximum timeout value is 24 hours or 1440 minutes. The minimum value is 1 minute. The default value is 30 minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1440  

eqlGroupSessionIdleTimeoutEnable 1.3.6.1.4.1.12740.1.1.1.1.69
Enable/disable the idle session timeout feature. The default is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

eqlGroupSessionBannerEnable 1.3.6.1.4.1.12740.1.1.1.1.70
Enable/disable the session banner feature. The default is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

eqlGroupDefaultVolSnapshotBorrowEnabled 1.3.6.1.4.1.12740.1.1.1.1.71
This field allows the user a way to change the default behavior of snapshot borrowing on new volume creates across the group.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupRecoveryLifeTimeEnable 1.3.6.1.4.1.12740.1.1.1.1.72
This field enables or disables the lifetime that a deleted volume can remain in the recovery bin. When enabled, a volume will be permanently deleted after the recovery lifetime in the recovery bin.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlGroupRecoveryLifeTime 1.3.6.1.4.1.12740.1.1.1.1.73
This field defines the amount of time (in seconds) that a deleted volume can remain in the recovery bin before being permanently deleted by the system. The default value (0) is one week.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlGroupTimeProtocol 1.3.6.1.4.1.12740.1.1.1.1.74
This field specifies the active network time protocol. The value may be ntp(0) or sntp(1) with a default value of ntp(0).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

eqlGroupRecoveryTrimmerFreq 1.3.6.1.4.1.12740.1.1.1.1.75
This field defines the frequency (in seconds) that the system will scan for volumes that have been in the recovery bin past their lifetime. The default value is one scan every 24 hours.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlGroupUpdateEnable 1.3.6.1.4.1.12740.1.1.1.1.76
Enable/disable update available checking.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

eqlGroupUpdateLast 1.3.6.1.4.1.12740.1.1.1.1.77
The time of last update performed represented as the number of seconds since the epoch.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlGroupDefaultSectorSize 1.3.6.1.4.1.12740.1.1.1.1.78
This field specifies, in bytes, the default volume sector size for this group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER sector-size-512-bytes(0), sector-size-4096-bytes(1)  

eqlGroupCompressionScanFreq 1.3.6.1.4.1.12740.1.1.1.1.80
This index is the last assigned index value associated with VVol Volumes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlGroupRunCompressionScan 1.3.6.1.4.1.12740.1.1.1.1.81
Enable/Disable the snapshot compression scanner.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

eqlGroupMonitorReminderTimestamp 1.3.6.1.4.1.12740.1.1.1.1.82
UTC timestamp when to display the monitoring connection reminder. 0 to display immediately. 0x7fffffff to never display.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusTable 1.3.6.1.4.1.12740.1.1.2
EqualLogic-Dynamic Group Status Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupStatusEntry

eqlStorageGroupStatusEntry 1.3.6.1.4.1.12740.1.1.2.1
An entry (row) containing Group status information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupStatusEntry  

eqlStorageGroupStatusPoolSpace 1.3.6.1.4.1.12740.1.1.2.1.1
This field specifies the total size of the Storage Pool in MBs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusPoolSpaceUsed 1.3.6.1.4.1.12740.1.1.2.1.2
This field specifies the total space reserved for volume data within the Storage Pool in MBs. Note that this value does not include space reserved for snapshots or replication.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusTotalMembersOnLine 1.3.6.1.4.1.12740.1.1.2.1.3
This field specifies the number of group members which are online.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusPoolSpaceReserved 1.3.6.1.4.1.12740.1.1.2.1.4
This field specifies the total space reserved for SnapShot data within the Storage Pool in MBs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusReservedSpaceInUse 1.3.6.1.4.1.12740.1.1.2.1.5
This field specifies the total reserved space in use by snapshots in the storage pool . This will be equal to sum of eqlMemberSnapStorage for all members.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusDateAndTime 1.3.6.1.4.1.12740.1.1.2.1.6
This field specifies the current time in group represented as number of seconds since epoch.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusSnapshotsInUse 1.3.6.1.4.1.12740.1.1.2.1.7
This field specifies the total number of snapshots within the group that currently have active iSCSI connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusVolumesInUse 1.3.6.1.4.1.12740.1.1.2.1.8
This field specifies the total number of snapshotsvolumes within the group that currently have active iSCSI connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusSnapshotsOnline 1.3.6.1.4.1.12740.1.1.2.1.9
This field specifies the total number of snapshots available for iSCSI connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusVolumesOnline 1.3.6.1.4.1.12740.1.1.2.1.10
This field specifies the total number of volumes available for iSCSI connections.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusSnapshotCount 1.3.6.1.4.1.12740.1.1.2.1.11
This field specifies the total number of snapshots in this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusVolumeCount 1.3.6.1.4.1.12740.1.1.2.1.12
This field specifies the total number of volumes in this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusMemberCount 1.3.6.1.4.1.12740.1.1.2.1.13
This field specifies the total number of members in this group irrelevant of current member state.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusMembersInUse 1.3.6.1.4.1.12740.1.1.2.1.14
This field specifies the total number of online+offline members in this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusFreeSpace 1.3.6.1.4.1.12740.1.1.2.1.15
This field specifies the total free space of the Storage Pool in Mega Bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusPoolSpaceDelegated 1.3.6.1.4.1.12740.1.1.2.1.16
This field specifies the amount of free space of the Storage Pool which has been partitioned for use by external services such as remote replication. This space is reserved and can be controlled by the users of these services. This sum represents total space reserved by all of the entries in the replicant site table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusDelegatedUsedSpace 1.3.6.1.4.1.12740.1.1.2.1.17
This field specifies the amount of space used by external services such as remote replication. This sum represents total space used by all of the entries in the replicant site table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusReplReserveSpace 1.3.6.1.4.1.12740.1.1.2.1.18
This sum represents total space reserved for all volumes for replication purposes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusReplReserveInUse 1.3.6.1.4.1.12740.1.1.2.1.19
This sum represents total space in use for all volumes for replication purposes. This value will be equal to sum of eqlMemberReplStorage for all members.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusVolumeSpaceSubscribed 1.3.6.1.4.1.12740.1.1.2.1.20
This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field in volume mib.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusVolumeSpaceAllocated 1.3.6.1.4.1.12740.1.1.2.1.21
The value of this object represents the sum of actual materialized pages for all volumes in the group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusFailbackSpace 1.3.6.1.4.1.12740.1.1.2.1.22
This field represents the amount of space consumed by fail-back replicasets in this storage group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusThinProvFreeSpace 1.3.6.1.4.1.12740.1.1.2.1.23
This field represents the amount of space available for Thin Provisioned Volumes in this storage group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusConnectionCount 1.3.6.1.4.1.12740.1.1.2.1.24
This field gives the number of iSCSI connections that are currently connected to volumes in this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusSnapReserveSpaceFree 1.3.6.1.4.1.12740.1.1.2.1.25
This represents the total space still available for Snapshot usage.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusReplReserveSpaceFree 1.3.6.1.4.1.12740.1.1.2.1.26
This represents the total space still available for Replica Snapshot usage.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusGroupId 1.3.6.1.4.1.12740.1.1.2.1.27
This represents an ID uniquely representing a group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(16)  

eqlStorageGroupStatusVirtualVolumeCount 1.3.6.1.4.1.12740.1.1.2.1.28
This field specifies the total number of volumes in this group, adjusted to remove volumes not typically visible such as synchronous replication standbys.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusVirtualVolumesOnline 1.3.6.1.4.1.12740.1.1.2.1.29
This field specifies the total number of volumes available for iSCSI connections, excluding synchronous replication standbys.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusVirtualVolumesInUse 1.3.6.1.4.1.12740.1.1.2.1.30
This field specifies the total number of volumes within the group that currently have active iSCSI connections excluding synchronous replication standbys.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusVirtualVolumeSpaceSubscribed 1.3.6.1.4.1.12740.1.1.2.1.31
This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field in volume mib. This value is adjusted to exclude subscribed space for synchronous replication standby volumes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatsTotalSpaceBorrowing 1.3.6.1.4.1.12740.1.1.2.1.32
This field specifies the total amount of borrowing against other volume's free snapshot reserve and pool free space. This includes snapshots and recoverable volumes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusStorageContainerCount 1.3.6.1.4.1.12740.1.1.2.1.34
This field specifies the total number of storage containers within the group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusStorageContainerVolumeCount 1.3.6.1.4.1.12740.1.1.2.1.35
This field specifies the total number of volume resources that are being consumed within all storage containers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusStorageContainerSnapCount 1.3.6.1.4.1.12740.1.1.2.1.36
This field specifies the total number of snapshot resources that are being consumed within all storage containers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusStorageContainerVolumesOnline 1.3.6.1.4.1.12740.1.1.2.1.37
This field specifies the total number of online volume resources that are being consumed within all storage containers.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupStatusStorageContainerSpaceReserved 1.3.6.1.4.1.12740.1.1.2.1.38
This field specifies the total amount of storage that is being consumed within all storage containers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStorageGroupStatusCompressedSpaceUsed 1.3.6.1.4.1.12740.1.1.2.1.39
This field specifies the total amount of space in MB that is currently utilized for compressed pages. This is a dynamic value and cannot be set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStorageGroupStatusVirtualSpaceSize 1.3.6.1.4.1.12740.1.1.2.1.40
This field specifies the total amount of space in MB that would be utilized by compressed pages if there was no compression.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlStorageGroupStatusReplicationSnapCount 1.3.6.1.4.1.12740.1.1.2.1.41
This field specifies the total number of snapshot resources that are being consumed for replication. This includes inbound replicas, and temporary snapshots used for in-progress outbound replication.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupStatusStorageContainerVolumesBound 1.3.6.1.4.1.12740.1.1.2.1.42
This field specifies the total number of bound volume across all storage containers.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlStorageGroupSiteTable 1.3.6.1.4.1.12740.1.1.3
EqualLogic-Persistent Storage Group Site Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupSiteEntry

eqlStorageGroupSiteEntry 1.3.6.1.4.1.12740.1.1.3.1
An entry (row) containing storage group site information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupSiteEntry  

eqlGroupSiteIndex 1.3.6.1.4.1.12740.1.1.3.1.1
This field specifies the unique index used to identify a site.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupSiteName 1.3.6.1.4.1.12740.1.1.3.1.2
This field specifies the name of the site default site for the group.
Status: current Access: read-create
OBJECT-TYPE    
  UTFString Size(1..64)  

eqlGroupSiteDescription 1.3.6.1.4.1.12740.1.1.3.1.3
This field contains a description of the site. For example the phsyical address of the site. There is no default.
Status: current Access: read-create
OBJECT-TYPE    
  UTFString Size(1..64)  

eqlGroupSiteContactEmail 1.3.6.1.4.1.12740.1.1.3.1.4
This field specifies the email address of the Administrators responsible for this site.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlGroupSiteContactPhone 1.3.6.1.4.1.12740.1.1.3.1.5
This field specifies the phone number of the Administrator responsible for this site.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlGroupSiteContactMobile 1.3.6.1.4.1.12740.1.1.3.1.6
This field specifies the cell phone number of the Administrator responsible for this site.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlGroupSiteRowStatus 1.3.6.1.4.1.12740.1.1.3.1.7
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlStorageGroupDnsServerTable 1.3.6.1.4.1.12740.1.1.4
EqualLogic-Persistent Storage Group DNS Server Table TimeoutAll:600
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupDnsServerEntry

eqlStorageGroupDnsServerEntry 1.3.6.1.4.1.12740.1.1.4.1
An entry (row) containing group dns server information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupDnsServerEntry  

eqlGroupDnsServerIndex 1.3.6.1.4.1.12740.1.1.4.1.1
This field specifies an index that uniquely identifies the DNS server entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupDnsServerIpAddress 1.3.6.1.4.1.12740.1.1.4.1.2
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

eqlGroupDnsServerRowStatus 1.3.6.1.4.1.12740.1.1.4.1.3
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlGroupDnsServerInetAddressType 1.3.6.1.4.1.12740.1.1.4.1.4
This field contains the IP address type for the DNS server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlGroupDnsServerInetAddress 1.3.6.1.4.1.12740.1.1.4.1.5
This field contains the IP address, in network byte order, for the DNS server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlGroupDnsServerConfigState 1.3.6.1.4.1.12740.1.1.4.1.6
This field denotes the transaction state of the eqlStorageGroupDnsServerTable.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER startConfig(0), inProgress(1), endConfig(2)  

eqlStorageGroupNtpServerTable 1.3.6.1.4.1.12740.1.1.5
EqualLogic-Persistent Storage Group NTP Server Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupNtpServerEntry

eqlStorageGroupNtpServerEntry 1.3.6.1.4.1.12740.1.1.5.1
An entry (row) containing group ntp server information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupNtpServerEntry  

eqlGroupNtpServerIndex 1.3.6.1.4.1.12740.1.1.5.1.1
This field specifies an index that uniquely identifies the NTP server entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupNtpServerIpAddress 1.3.6.1.4.1.12740.1.1.5.1.2
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

eqlGroupNtpServerRowStatus 1.3.6.1.4.1.12740.1.1.5.1.3
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlGroupNtpServerPort 1.3.6.1.4.1.12740.1.1.5.1.4
The listening port number of the ntp server.Default value implies well known ntp port number ( 123 ) assigned by the IANA.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eqlGroupNtpServerInetAddressType 1.3.6.1.4.1.12740.1.1.5.1.5
This field contains the IP address type for the NTP server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlGroupNtpServerInetAddress 1.3.6.1.4.1.12740.1.1.5.1.6
This field contains the IP address, in network byte order, for the NTP server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlStorageGroupChapServerTable 1.3.6.1.4.1.12740.1.1.6
EqualLogic-Persistent Storage Group Chap Server Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupChapServerEntry

eqlStorageGroupChapServerEntry 1.3.6.1.4.1.12740.1.1.6.1
An entry (row) containing storage group chap server information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupChapServerEntry  

eqlGroupChapServerIndex 1.3.6.1.4.1.12740.1.1.6.1.1
This field specifies an index that uniquely identifies the CHAP server entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupChapServerIpAddress 1.3.6.1.4.1.12740.1.1.6.1.2
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

eqlGroupChapServerRowStatus 1.3.6.1.4.1.12740.1.1.6.1.3
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlGroupChapServerPort 1.3.6.1.4.1.12740.1.1.6.1.4
The listening port number of chap server at the specified ipaddress. The default value of zero implies that the authentication request will be forwarded to the default radius port(port number 1812). The value of this object is irrelevant if eqlGroupChapServerInetAddress is the loopback ipaddress.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

eqlGroupChapServerRADIUSSecret 1.3.6.1.4.1.12740.1.1.6.1.5
This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

eqlGroupChapServerInetAddressType 1.3.6.1.4.1.12740.1.1.6.1.6
This field contains the IP address type for the CHAP server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlGroupChapServerInetAddress 1.3.6.1.4.1.12740.1.1.6.1.7
This field contains the IP address, in network byte order, for the CHAP server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlStorageGroupSMTPServerTable 1.3.6.1.4.1.12740.1.1.7
EqualLogic-Persistent Storage Group SMTP Server Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupSMTPServerEntry

eqlStorageGroupSMTPServerEntry 1.3.6.1.4.1.12740.1.1.7.1
An entry (row) containing group smtp sever information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupSMTPServerEntry  

eqlGroupSMTPServerIndex 1.3.6.1.4.1.12740.1.1.7.1.1
This field specifies an index that uniquely identifies the SMTP server entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupSMTPServerIpAddress 1.3.6.1.4.1.12740.1.1.7.1.2
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

eqlGroupSMTPServerRowStatus 1.3.6.1.4.1.12740.1.1.7.1.3
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlGroupSMTPServerPort 1.3.6.1.4.1.12740.1.1.7.1.4
The listening port number of the SMTP server. The default value of zero implies that the server is listening on wellknown port number ( 25 ) for SMTP asssigned by the IANA.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

eqlGroupSMTPServerInetAddressType 1.3.6.1.4.1.12740.1.1.7.1.5
This field contains the IP address type for the SMTP server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlGroupSMTPServerInetAddress 1.3.6.1.4.1.12740.1.1.7.1.6
This field contains the IP address, in network byte order, for the SMTP server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlStorageGroupSysLogServerTable 1.3.6.1.4.1.12740.1.1.8
EqualLogic-Persistent Storage Group SysLog Server Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupSysLogServerEntry

eqlStorageGroupSysLogServerEntry 1.3.6.1.4.1.12740.1.1.8.1
An entry (row) containing group syslog server info.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupSysLogServerEntry  

eqlGroupSysLogServerIndex 1.3.6.1.4.1.12740.1.1.8.1.1
This field specifies an index that uniquely identifies the syslog server entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupSysLogServerIpAddress 1.3.6.1.4.1.12740.1.1.8.1.2
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

eqlGroupSysLogServerRowStatus 1.3.6.1.4.1.12740.1.1.8.1.3
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlGroupSysLogServerInetAddressType 1.3.6.1.4.1.12740.1.1.8.1.4
This field contains the IP address type for the syslog server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlGroupSysLogServerInetAddress 1.3.6.1.4.1.12740.1.1.8.1.5
This field contains the IP address, in network byte order, for the syslog server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlStorageGroupAlertEmailTable 1.3.6.1.4.1.12740.1.1.9
EqualLogic-Persistent Storage Group Email Alert Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupAlertEmailEntry

eqlStorageGroupAlertEmailEntry 1.3.6.1.4.1.12740.1.1.9.1
An entry (row) containing group alert email info.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupAlertEmailEntry  

eqlGroupAlertEmailIndex 1.3.6.1.4.1.12740.1.1.9.1.1
This field specifies an index that uniquely identifies the email user to alert.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupAlertEmailAddress 1.3.6.1.4.1.12740.1.1.9.1.2
This field specifies the email address of the Adminstrator targeted to recieve the email the email alerts.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

eqlGroupAlertEmailRowStatus 1.3.6.1.4.1.12740.1.1.9.1.3
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlStorageGroupAdminAccountTable 1.3.6.1.4.1.12740.1.1.10
EqualLogic-Persistent Storage Group Administration account table. This table contains a collection of administration account records. It is indexed by group id and administration account record index.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupAdminAccountEntry

eqlStorageGroupAdminAccountEntry 1.3.6.1.4.1.12740.1.1.10.1
An entry (row) containing administration account settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupAdminAccountEntry  

eqlStorageGroupAdminAccountIndex 1.3.6.1.4.1.12740.1.1.10.1.1
The index value that uniquely identifies the administration account record.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlStorageGroupAdminAccountRowStatus 1.3.6.1.4.1.12740.1.1.10.1.2
This value is used to manage the conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlStorageGroupAdminAccountName 1.3.6.1.4.1.12740.1.1.10.1.3
EQL-SECONDARY-KEY The name of the administration account. This name must be used for user authentication.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlStorageGroupAdminAccountPassword 1.3.6.1.4.1.12740.1.1.10.1.4
An octet string containing the (crypt cipher) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlStorageGroupAdminAccountDescription 1.3.6.1.4.1.12740.1.1.10.1.5
This field contains a description of the administration account.
Status: current Access: read-create
OBJECT-TYPE    
  UTFString Size(0..128)  

eqlStorageGroupAdminAccountType 1.3.6.1.4.1.12740.1.1.10.1.6
This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected.
Status: current Access: read-create
OBJECT-TYPE    
  AdminAccountType  

eqlStorageGroupAdminAccountContact 1.3.6.1.4.1.12740.1.1.10.1.7
This field contains the full name of the owner of this administration account.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

eqlStorageGroupAdminAccountEmail 1.3.6.1.4.1.12740.1.1.10.1.8
This field specifies the email address of the owner of this administration account.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

eqlStorageGroupAdminAccountPhone 1.3.6.1.4.1.12740.1.1.10.1.9
This field specifies the phone number of the owner of this administration account.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

eqlStorageGroupAdminAccountMobile 1.3.6.1.4.1.12740.1.1.10.1.10
This field specifies the cell phone number of the owner of this administration account.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

eqlStorageGroupAdminAccountStatus 1.3.6.1.4.1.12740.1.1.10.1.11
This field represents the administration status of the account. Disabling the account will prevent the user from logging into CLI and GUI. Currently logged-in sessions will not be affected.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

eqlStorageGroupAdminAccountCliFlags 1.3.6.1.4.1.12740.1.1.10.1.12
This field specifies the set of configuration flags used by the CLI. These flags allow the administrator to save CLI configuration settings between the CLI sessions. The meaning of individual bits is not defined yet. TBD
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

eqlStorageGroupAdminAccountGuiFlags 1.3.6.1.4.1.12740.1.1.10.1.13
This field specifies the set of configuration flags used by the GUI. These flags allow the administrator to save GUI configuration settings between the GUI sessions. The meaning of individual bits is not defined yet. TBD
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2147483647  

eqlStorageGroupAdminAccountPollInterval 1.3.6.1.4.1.12740.1.1.10.1.14
The value of this field specifies how often the group configuration data must be repolled by the GUI. This value is expressed in seconds. The minimum is 5 seconds; the maximum is 1 hour. The default is 30 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 5..3600  

eqlStorageGroupAdminAccountAuthType 1.3.6.1.4.1.12740.1.1.10.1.15
This field represents the type of authentication for the administrator. Note that RADIUS/LDAP type users will only appear in the table after a successful login.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER local(0), radius(1), ldap(2)  

eqlStorageGroupAdminAccountRecentLogin 1.3.6.1.4.1.12740.1.1.10.1.16
This field represents a timestamp of the most recent time this admin account has logged in. Currently only applies to radius auth type users.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eqlStorageGroupAdminAccountClass 1.3.6.1.4.1.12740.1.1.10.1.17
This field contains the contents of the class attribute received in the RADIUS Access-Request and must be reflected in the RADIUS Accounting-Request if accounting is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

eqlStorageGroupAdminAccountPrivilege 1.3.6.1.4.1.12740.1.1.10.1.18
This field specifies the privilege level of the account. The default is global-admin. global-admin grants full access to the administrator. pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. volume-admin designates the administrator to have access to specific volumes within specific storage pools.
Status: current Access: read-create
OBJECT-TYPE    
  AdminAccountPrivilegeType  

eqlStorageGroupAdminAccountSnmpKey 1.3.6.1.4.1.12740.1.1.10.1.19
This field contain part of the SNMP key for this account.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(20)  

eqlStorageGroupAdminAccountSnmpKey2 1.3.6.1.4.1.12740.1.1.10.1.20
This field contain part of the SNMP second key for this account.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(20)  

eqlStorageGroupAdminAccountCHAPPassword 1.3.6.1.4.1.12740.1.1.10.1.21
An octet string containing the (cleartext) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlStorageGroupAdminAccountKey 1.3.6.1.4.1.12740.1.1.10.1.22
A value to uniquely identify this account. The MIB attribute eqliscsiVolumeAdminAccountKey uses this value to associate a volume with an account. No two accounts can have the same value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupAdminAccountAdGroupName 1.3.6.1.4.1.12740.1.1.10.1.23
The name of the Active Directory group, valid only when auth type is LDAP. Same as cn attribute of the AD group.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..65)  

eqlStorageGroupAdminAccountSNMPPrivProt 1.3.6.1.4.1.12740.1.1.10.1.24
An enum field used by the Agent to determine which privacy protocol is used to encrypt external SNMP messages for this user.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER des(0), aes128(1)  

eqlStorageGroupiSNSServerTable 1.3.6.1.4.1.12740.1.1.11
EqualLogic-Persistent Storage Group iSNS Server Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupiSNSServerEntry

eqlStorageGroupiSNSServerEntry 1.3.6.1.4.1.12740.1.1.11.1
An entry (row) containing group iSNS server information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupiSNSServerEntry  

eqlGroupiSNSServerIndex 1.3.6.1.4.1.12740.1.1.11.1.1
This field specifies an index that uniquely identifies the iSNS server entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupiSNSServerRowStatus 1.3.6.1.4.1.12740.1.1.11.1.2
Used to manage conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlGroupiSNSServerIpAddress 1.3.6.1.4.1.12740.1.1.11.1.3
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

eqlGroupiSNSServerPort 1.3.6.1.4.1.12740.1.1.11.1.4
Indicates the port the iSNS server is accepting iSNSP messages on, generally the iSNS well known port.The well known port for iSNSP is 3205. The default value implies to use well known port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eqlGroupiSNSServerInetAddressType 1.3.6.1.4.1.12740.1.1.11.1.5
This field contains the IP address type for the iSNS server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlGroupiSNSServerInetAddress 1.3.6.1.4.1.12740.1.1.11.1.6
This field contains the IP address, in network byte order, for the iSNS server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlGroupCompatibilityTable 1.3.6.1.4.1.12740.1.1.12
EqualLogic-Dynamic Group Compatibility Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlGroupCompatibilityEntry

eqlGroupCompatibilityEntry 1.3.6.1.4.1.12740.1.1.12.1
An entry (row) containing group compatibility information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlGroupCompatibilityEntry  

eqlGroupCurrentCompLevel 1.3.6.1.4.1.12740.1.1.12.1.1
This field represents the current compatibility level of the group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupCollectionTable 1.3.6.1.4.1.12740.1.1.13
EqualLogic-Dynamic Group Collection Table. This table maintains overall number of volume collections and snap collection in a group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupCollectionEntry

eqlStorageGroupCollectionEntry 1.3.6.1.4.1.12740.1.1.13.1
An entry (row) containing volume/snap collections information in a group.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupCollectionEntry  

eqlGrpNoofVolCollections 1.3.6.1.4.1.12740.1.1.13.1.1
This field specifies the total number of volume collections in the group ie number of rows in eqliscsiVolCollectionTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlGrpNoofSnapCollections 1.3.6.1.4.1.12740.1.1.13.1.2
This field specifies the total number of snapshot collections in the group ie number of rows in eqliscsiSnapCollectionTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlGrpNoofOrphanSnapCollections 1.3.6.1.4.1.12740.1.1.13.1.3
This field specifies the total number of snapshot collections in the group that dont have a corresponding volume set ie number of rows in eqliscsiSnapCollectionTable with eqliscsiSnapCollectionVolIndex set to zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlRADIUSTable 1.3.6.1.4.1.12740.1.1.14
EqualLogic-Persistent Group RADIUS Configuration Table. This table maintains the configuration for the RADIUS implementation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlRADIUSEntry

eqlRADIUSEntry 1.3.6.1.4.1.12740.1.1.14.1
An entry (row) containing RADIUS information in a group.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlRADIUSEntry  

eqlRADIUSSecret 1.3.6.1.4.1.12740.1.1.14.1.1
This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

eqlRADIUSLoginAuthEnable 1.3.6.1.4.1.12740.1.1.14.1.2
This field enables RADIUS login authentication.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlRADIUSAuthRecvTimeout 1.3.6.1.4.1.12740.1.1.14.1.3
This field configures the RADIUS authentication message receive timeout in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

eqlRADIUSAuthMaxRetries 1.3.6.1.4.1.12740.1.1.14.1.4
This field configures the number of RADIUS authentication retries.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10  

eqlRADIUSLoginAcctEnable 1.3.6.1.4.1.12740.1.1.14.1.5
This field enables RADIUS accounting for login administrators.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlRADIUSAcctRecvTimeout 1.3.6.1.4.1.12740.1.1.14.1.6
This field configures the RADIUS accounting message receive timeout in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

eqlRADIUSAcctMaxRetries 1.3.6.1.4.1.12740.1.1.14.1.7
This field configures the number of RADIUS accounting retries.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10  

eqlRADIUSiscsiAuthEnable 1.3.6.1.4.1.12740.1.1.14.1.8
This field enables RADIUS authentication for ISCSI initiators.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlLocaliscsiAuthEnable 1.3.6.1.4.1.12740.1.1.14.1.9
This field enables Local authentication for ISCSI initiators.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlRADIUSRequireAdminAttrEnable 1.3.6.1.4.1.12740.1.1.14.1.10
This field enables requiring the EQL-Admin RADIUS return attribute.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eqlRADIUSAcctServerTable 1.3.6.1.4.1.12740.1.1.15
EqualLogic-Persistent Group RADIUS Accounting server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlRADIUSAcctServerEntry

eqlRADIUSAcctServerEntry 1.3.6.1.4.1.12740.1.1.15.1
An entry (row) containing the configuration for a RADIUS accounting server.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlRADIUSAcctServerEntry  

eqlRADIUSAcctServerIndex 1.3.6.1.4.1.12740.1.1.15.1.1
This field specifies an index that uniquely identifies the RADIUS Accounting server entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlRADIUSAcctServerIpAddress 1.3.6.1.4.1.12740.1.1.15.1.2
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

eqlRADIUSAcctServerPort 1.3.6.1.4.1.12740.1.1.15.1.3
The listening port number of the RADIUS Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default RADIUS Accounting port(port number 1813).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

eqlRADIUSAcctServerRowStatus 1.3.6.1.4.1.12740.1.1.15.1.4
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlRADIUSAcctServerSecret 1.3.6.1.4.1.12740.1.1.15.1.5
This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

eqlRADIUSAcctServerInetAddressType 1.3.6.1.4.1.12740.1.1.15.1.6
This field contains the IP address type for the RADIUS Accounting server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlRADIUSAcctServerInetAddress 1.3.6.1.4.1.12740.1.1.15.1.7
This field contains the IP address, in network byte order, for the RADIUS Accounting server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlUserSessionTable 1.3.6.1.4.1.12740.1.1.16
EqualLogic-Dynamic user session table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlUserSessionEntry

eqlUserSessionEntry 1.3.6.1.4.1.12740.1.1.16.1
An entry (row) containing an active user administrative session.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlUserSessionEntry  

eqlUserSessionIndex 1.3.6.1.4.1.12740.1.1.16.1.1
This field specifies an index that uniquely identifies the user session entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlUserSessionAdminAccountIndex 1.3.6.1.4.1.12740.1.1.16.1.2
This field specifies an index that uniquely identifies a storage group admin account entry.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

eqlUserSessionStart 1.3.6.1.4.1.12740.1.1.16.1.3
The timestamp from the start of the administrative session.
Status: current Access: read-write
OBJECT-TYPE    
  Counter32  

eqlUserSessionProtocol 1.3.6.1.4.1.12740.1.1.16.1.4
The incoming protocol through which the administrator is connecting to the array.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER root(0), console(1), telnet(2), ssh(3), gui(4), gui-ssl(5)  

eqlUserSessionRemoteAddress 1.3.6.1.4.1.12740.1.1.16.1.5
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eqlUserSessionLocalAddress 1.3.6.1.4.1.12740.1.1.16.1.6
This field is deprecated and will be unsupported in the next release.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eqlUserSessionRemoteInetAddressType 1.3.6.1.4.1.12740.1.1.16.1.7
The remote IP address type, if applicable, from which the administrator is connecting.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

eqlUserSessionRemoteInetAddress 1.3.6.1.4.1.12740.1.1.16.1.8
The remote IP address, if applicable, from which the administrator is connecting.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

eqlUserSessionLocalInetAddressType 1.3.6.1.4.1.12740.1.1.16.1.9
The local interface IP address type, if applicable, at which the administrator is connecting.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

eqlUserSessionLocalInetAddress 1.3.6.1.4.1.12740.1.1.16.1.10
The local interface IP address, if applicable, at which the administrator is connecting.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

eqlRecordVersionTable 1.3.6.1.4.1.12740.1.1.17
EqualLogic record version table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlRecordVersionEntry

eqlRecordVersionEntry 1.3.6.1.4.1.12740.1.1.17.1
An entry (row) containing min and max record version.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlRecordVersionEntry  

eqlRecordVersionTableType 1.3.6.1.4.1.12740.1.1.17.1.1
This field identifies a specific MIB table by tableType_t (see tableTypes.h).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlRecordVersionMin 1.3.6.1.4.1.12740.1.1.17.1.2
This field specifies the lowest REC_HDR::major value found in any record of this table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlRecordVersionMax 1.3.6.1.4.1.12740.1.1.17.1.3
This field specifies the current REC_HDR::major value for records of this table.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eqlGroupTaskTable 1.3.6.1.4.1.12740.1.1.18
EqualLogic-Persistent task table. A row in this table represents a task currently executing in the group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlGroupTaskEntry

eqlGroupTaskEntry 1.3.6.1.4.1.12740.1.1.18.1
A row in the table represents a task. Any given task will have multiple sub tasks. Each sub task involves executing a management operation. The system will execute each sub task one after another until the task is completed.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlGroupTaskEntry  

eqlGroupTaskIndex 1.3.6.1.4.1.12740.1.1.18.1.1
This field specifies an index that uniquely identifies a task.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlGroupTaskRowStatus 1.3.6.1.4.1.12740.1.1.18.1.2
This field is used to manage the conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlGroupTaskType 1.3.6.1.4.1.12740.1.1.18.1.3
This field represents the type of the task.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER resync(1), failback(2)  

eqlGroupTaskContext 1.3.6.1.4.1.12740.1.1.18.1.4
Context associated with the task. For ex: a volume or replicaset.
Status: current Access: read-create
OBJECT-TYPE    
  RowPointer  

eqlGroupTaskNumSubTasks 1.3.6.1.4.1.12740.1.1.18.1.5
Number of subtasks in this task.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlGroupTaskSubTaskInProgress 1.3.6.1.4.1.12740.1.1.18.1.6
Subtask that is currently in progress for this task.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), primaryVolumeOffline(10001), primaryVolumeReplicationCancel(10002), primaryVolumeDemote(10003), recoveryVolumeReplicationConfigure(10004), recoveryVolumeCreateReplica(10005), recoveryVolumeDisableSchedules(20001), recoveryVolumeOffline(20002), recoveryVolumeFinalReplication(20003), recoveryVolumeDemote(20004), primaryVolumePromote(20005)  

eqlGroupTaskSubtaskStatus 1.3.6.1.4.1.12740.1.1.18.1.7
Status of currently executing subtask.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlGroupTaskStatus 1.3.6.1.4.1.12740.1.1.18.1.8
set to true if user action is required for the task to proceed further.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER user-action-required(1), in-progress(2), complete(3)  

eqlGroupTaskUserAction 1.3.6.1.4.1.12740.1.1.18.1.9
user action on the task.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER retry(1)  

eqlGroupTaskStartTime 1.3.6.1.4.1.12740.1.1.18.1.10
time at which this task started represented as number of seconds since epoch.
Status: current Access: read-create
OBJECT-TYPE    
  Counter32  

eqlGroupTaskReplication 1.3.6.1.4.1.12740.1.1.18.1.11
If set to true, a manual replica will be created when performing replication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER manual(1), network(2), noreplication(3)  

eqlStorageGroupProfileTable 1.3.6.1.4.1.12740.1.1.20
EqualLogic-Persistent Group Profile Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupProfileEntry

eqlStorageGroupProfileEntry 1.3.6.1.4.1.12740.1.1.20.1
An entry (row) containing the profile limits and configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupProfileEntry  

eqlStorageGroupProfileVersion 1.3.6.1.4.1.12740.1.1.20.1.1
This field specifies the current version of the Profile. The most significant 16 bits are the compat level, the least significant 16 bits are the profile version.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileWeight 1.3.6.1.4.1.12740.1.1.20.1.2
This field specifies the current weight of the Profile
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxMembers 1.3.6.1.4.1.12740.1.1.20.1.3
This field specifies the maximum members that can exist in the group with this profile id.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxVolumes 1.3.6.1.4.1.12740.1.1.20.1.4
This field specifies the maximum number of volumes in group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxSnapsPerGroup 1.3.6.1.4.1.12740.1.1.20.1.5
This field specifies the maximum number of snaps in group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxSnapsPerVolume 1.3.6.1.4.1.12740.1.1.20.1.6
This field specifies the maximum number of snaps per volume.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxReplicasPerVolume 1.3.6.1.4.1.12740.1.1.20.1.7
This field specifies the maximum number of Replicas per volume.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxReplVolumes 1.3.6.1.4.1.12740.1.1.20.1.8
This field specifies the maximum number of replication volumes in group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxConnections 1.3.6.1.4.1.12740.1.1.20.1.9
This field specifies the maximum number of connections allowed per pool.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxPartners 1.3.6.1.4.1.12740.1.1.20.1.10
This field specifies the maximum number of partners in group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxConnWarning 1.3.6.1.4.1.12740.1.1.20.1.11
This field specifies when will warning be issued for connection limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupProfileMaxSyncReplVolumes 1.3.6.1.4.1.12740.1.1.20.1.12
This field specifies the maximum number of Sync Repl volumes allowed in the group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupAdminAccountKeyTable 1.3.6.1.4.1.12740.1.1.21
EqualLogic-Dynamic table converting a eqlStorageGroupAdminAccountKey to a eqlStorageGroupAdminAccountIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupAdminAccountKeyEntry

eqlStorageGroupAdminAccountKeyEntry 1.3.6.1.4.1.12740.1.1.21.1
An entry (row) containing the value of the account index.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupAdminAccountKeyEntry  

eqlStorageGroupAdminAccountIndexValue 1.3.6.1.4.1.12740.1.1.21.1.1
The index to use to access the group admin account associated with the key specified.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

eqlStorageGroupChapAccountTable 1.3.6.1.4.1.12740.1.1.22
EqualLogic-Persistent Storage Group CHAP account table. This table contains a collection of CHAP account records, each containing Equallogic specific CHAP account information. It is indexed by group id and CHAP account record index. There should be a row in this table for every row with index 1.1.X in table ipsAuthCredChapAttributesTable. Also, chapIndex is equal to ipsAuthCredIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupChapAccountEntry

eqlStorageGroupChapAccountEntry 1.3.6.1.4.1.12740.1.1.22.1
An entry (row) containing administration account settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupChapAccountEntry  

eqlStorageGroupChapAccountIndex 1.3.6.1.4.1.12740.1.1.22.1.1
The index value that uniquely identifies the CHAP account record.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlStorageGroupChapAccountRowStatus 1.3.6.1.4.1.12740.1.1.22.1.2
This value is used to manage the conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlStorageGroupChapAccountAdminAccountKey 1.3.6.1.4.1.12740.1.1.22.1.3
A value to uniquely identify this administrative account that created this CHAP account. This value matches the eqlStorageGroupAdminAccountKey of the creating account. If no account exists with a matching account key, then the administrative account that created this CHAP account has been deleted.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupChapAccountPublic 1.3.6.1.4.1.12740.1.1.22.1.4
If true, the name of the associated CHAP account is viewable by all admin accounts. If false, the name of the associated CHAP account is not viewable by volume administrator accounts that did not create the associated CHAP account
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

eqlLDAPServerTable 1.3.6.1.4.1.12740.1.1.24
EqualLogic-Persistent Group LDAP Accounting server table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlLDAPServerEntry

eqlLDAPServerEntry 1.3.6.1.4.1.12740.1.1.24.1
An entry (row) containing the configuration for a LDAP server.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlLDAPServerEntry  

eqlLDAPServerIndex 1.3.6.1.4.1.12740.1.1.24.1.1
This field specifies an index that uniquely identifies the LDAP server entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlLDAPServerBaseDN 1.3.6.1.4.1.12740.1.1.24.1.2
This field contains the LDAP server BASE DN used for ldapsearch queries.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

eqlLDAPServerSecureProtocol 1.3.6.1.4.1.12740.1.1.24.1.3
This field represent the security protocol between PS Group and the LDAP server. Default value is none meaning that the user credentials will be sent over the network in plain text.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), tls(1)  

eqlLDAPServerInetAddressType 1.3.6.1.4.1.12740.1.1.24.1.4
This field contains the IP address type for the LDAP Accounting server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlLDAPServerInetAddress 1.3.6.1.4.1.12740.1.1.24.1.5
This field contains the IP address, in network byte order, for the LDAP Accounting server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlLDAPServerPort 1.3.6.1.4.1.12740.1.1.24.1.6
The listening port number of the LDAP Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default LDAP Accounting port (389).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

eqlLDAPServerAnonymousAccess 1.3.6.1.4.1.12740.1.1.24.1.7
This field specifies whether an anonymous bind can be done, in which case the bind DN and the bind password are not needed. The default is no anonymous access.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

eqlLDAPServerBindDN 1.3.6.1.4.1.12740.1.1.24.1.8
This field contains the LDAP bind DN (username) for this client. It can be set but it returns a zero-length string upon read.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

eqlLDAPServerBindPassword 1.3.6.1.4.1.12740.1.1.24.1.9
This field contains the LDAP bind password for this client. It can be set but it returns a zero-length string upon read.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

eqlLDAPServerRowStatus 1.3.6.1.4.1.12740.1.1.24.1.10
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlLdapLoginAccessTable 1.3.6.1.4.1.12740.1.1.25
EqualLogic-Persistent Group Active directory group table. Stores the access that an AD group or account receives when logging in through an entry in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlLdapLoginAccessEntry

eqlLdapLoginAccessEntry 1.3.6.1.4.1.12740.1.1.25.1
An entry (row) containing the configuration for the LDAP object access details.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlLdapLoginAccessEntry  

eqlLdapLoginAccessName 1.3.6.1.4.1.12740.1.1.25.1.1
The name of the LDAP object access description. For AD groups, it is the same as cn attribute of the AD group. For LDAP accounts, it is the same as the account name. Length allows for terminating null terminating character.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..65)  

eqlLdapLoginAccessType 1.3.6.1.4.1.12740.1.1.25.1.2
This field represents the type of LDAP object that this entry grants access to.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER adGroup(1), ldapUser(2)  

eqlLdapLoginAccessAccountPrivilege 1.3.6.1.4.1.12740.1.1.25.1.3
This field specifies the privilege level of the account that logs in through this LDAP object access. The default is global-admin. Global-admin grants full access to the administrator. Pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. Volume-admin designates the administrator to have access to specific volumes within specific storage pools
Status: current Access: read-create
OBJECT-TYPE    
  AdminAccountPrivilegeType  

eqlLdapLoginAccessAccountType 1.3.6.1.4.1.12740.1.1.25.1.4
This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected. Read-only account is only applicable for group admin accounts/pool-admin accounts. Group-admins with read-only set cannot modify any settings.
Status: current Access: read-create
OBJECT-TYPE    
  AdminAccountType  

eqlLdapLoginAccessRowStatus 1.3.6.1.4.1.12740.1.1.25.1.5
This field indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlLdapLoginAccessAdDomainName 1.3.6.1.4.1.12740.1.1.25.1.6
The name of the AD Domain associated with this LDAP object. Length allows for terminating null terminating character.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..65)  

eqlStorageGroupDnsSuffixTable 1.3.6.1.4.1.12740.1.1.26
EqualLogic-Persistent Storage Group DNS Suffix Table TimeoutAll:600
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupDnsSuffixEntry

eqlStorageGroupDnsSuffixEntry 1.3.6.1.4.1.12740.1.1.26.1
An entry (row) containing group dns suffix information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupDnsSuffixEntry  

eqlGroupDnsSuffixIndex 1.3.6.1.4.1.12740.1.1.26.1.1
This field specifies an index that uniquely identifies the DNS suffix entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

eqlGroupDnsSuffixRowStatus 1.3.6.1.4.1.12740.1.1.26.1.2
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlGroupDnsSuffixString 1.3.6.1.4.1.12740.1.1.26.1.3
This field contains a suffix string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..127)  

eqlGroupDnsSuffixConfigState 1.3.6.1.4.1.12740.1.1.26.1.4
This field denotes the transaction state of the eqlStorageGroupDnsSuffixTable.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER startConfig(0), inProgress(1), endConfig(2)  

eqlStorageGroupSnmpTable 1.3.6.1.4.1.12740.1.1.27
EqualLogic-Dynamic Storage Group Snmp Table. Used solely to communicate Group Snmp params to the Appliance.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupSnmpEntry

eqlStorageGroupSnmpEntry 1.3.6.1.4.1.12740.1.1.27.1
An entry (row) containing snmp information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupSnmpEntry  

eqlStorageGroupSnmpRowStatus 1.3.6.1.4.1.12740.1.1.27.1.1
Rowstatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlStorageGroupSnmpManagersList 1.3.6.1.4.1.12740.1.1.27.1.2
Specifies a list of SNMP managers that can receive SNMP traps. Contains Max of 5 comma separated IP addresses.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

eqlStorageGroupSnmpTrapCommunity 1.3.6.1.4.1.12740.1.1.27.1.3
Specifies the trap read-only community string.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

eqlGroupSessionBannerTable 1.3.6.1.4.1.12740.1.1.28
EqualLogic-Persistent Storage Group Session Banner Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlGroupSessionBannerEntry

eqlGroupSessionBannerEntry 1.3.6.1.4.1.12740.1.1.28.1
An entry (row) containing session banner information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlGroupSessionBannerEntry  

eqlGroupSessionBannerRowStatus 1.3.6.1.4.1.12740.1.1.28.1.1
Rowstatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlGroupSessionBannerText 1.3.6.1.4.1.12740.1.1.28.1.2
Up to 1000 bytes of UTF-8 string to display at the beginning of any session
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..1000)  

eqlGroupSingleSignOnStatusTable 1.3.6.1.4.1.12740.1.1.29
EqualLogic-Dynamic Single Sign on status table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlGroupSingleSignOnStatusEntry

eqlGroupSingleSignOnStatusEntry 1.3.6.1.4.1.12740.1.1.29.1
An entry (row) containing session Single Sign on status information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlGroupSingleSignOnStatusEntry  

eqlGroupSingleSignOnStatus 1.3.6.1.4.1.12740.1.1.29.1.1
This field specifies the local status for signle sign on as maintained by the PS group It will be set to Ready if an attempt to join the AD server had succeeded with the current group name and current AD domain (as set setup in eqlLDAPServerTable)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-ready(0), ready(1)  

eqlGroupSingleSignOnRegGroupName 1.3.6.1.4.1.12740.1.1.29.1.2
This field specifies the group name that was registered with the AD server
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlGroupSingleSignOnKrbRealm 1.3.6.1.4.1.12740.1.1.29.1.3
This field contains kerberos relam or the domain name expressed using a dot notation. This field should match the dc part of the BASE DN in the eqlLDAPServerTable.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

eqlNextAvailableIndexTable 1.3.6.1.4.1.12740.1.1.30
EqualLogic-Dynamic Next Available Index Table This table tracks the next available index for a specified table type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlNextAvailableIndexEntry

eqlNextAvailableIndexEntry 1.3.6.1.4.1.12740.1.1.30.1
An entry (row) which tracks an available index for the specified table type.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlNextAvailableIndexEntry  

eqlNextAvailableIndexTableType 1.3.6.1.4.1.12740.1.1.30.1.1
This field indicates the table for which this index is maintained (from tableTypes.h).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlNextAvailableIndexValue 1.3.6.1.4.1.12740.1.1.30.1.2
This field maintains the last db index value used for the specified table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlStorageGroupSnmpReadOnlyCommunityTable 1.3.6.1.4.1.12740.1.1.31
EqualLogic-Dynamic Storage Group Snmp Read Only Community Table. Used solely to manage the Group SNMP read only community string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlStorageGroupSnmpReadOnlyCommunityEntry

eqlStorageGroupSnmpReadOnlyCommunityEntry 1.3.6.1.4.1.12740.1.1.31.1
An entry (row) containing snmp community information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlStorageGroupSnmpReadOnlyCommunityEntry  

eqlStorageGroupSnmpReadOnlyCommunity 1.3.6.1.4.1.12740.1.1.31.1.1
Specifies SNMP read only community string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

eqlEULAAcceptInfoTable 1.3.6.1.4.1.12740.1.1.32
EqualLogic-Persistent EULA acceptance information table. This table contains a single record that stores information associated with the most recent EULA accepted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlEULAAcceptInfoEntry

eqlEULAAcceptInfoEntry 1.3.6.1.4.1.12740.1.1.32.1
An entry (row) containing EULA acceptance information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlEULAAcceptInfoEntry  

eqlEULAAcceptInfoFirmwareType 1.3.6.1.4.1.12740.1.1.32.1.1
The firmware type of the accepted EULA.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER peer-storage-array(1), fluidfs-nas(2)  

eqlEULAAcceptInfoRowStatus 1.3.6.1.4.1.12740.1.1.32.1.2
This value is used to manage the conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlEULAAcceptInfoAccountName 1.3.6.1.4.1.12740.1.1.32.1.3
The name of the administration account used to accept the EULA.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlEULAAcceptInfoEULAVersion 1.3.6.1.4.1.12740.1.1.32.1.4
The version of the accepted EULA.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlEULAAcceptInfoTimestamp 1.3.6.1.4.1.12740.1.1.32.1.5
The timestamp when the EULA was accepted..
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor