EQLAPPLIANCE-MIB

File: EQLAPPLIANCE-MIB.mib (159952 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
EQLGROUP-MIB EQUALLOGIC-SMI EQLVOLUME-MIB
EQLMEMBER-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter64 Integer32 TimeTicks
enterprises IpAddress Counter32
Gauge32 DateAndTime RowPointer
TruthValue RowStatus DisplayString
InetAddressType InetAddress UTFString
equalLogic eqliscsiVolumeEntry eqliscsiVolumeTargetIscsiName
eqlMemberIndex eqlGroupId

Defined Types

EqlApplianceEntry  
SEQUENCE    
  eqlApplianceIndex Unsigned32
  eqlApplianceRowStatus RowStatus
  eqlApplianceName OCTET STRING
  eqlApplianceType INTEGER
  eqlApplianceState INTEGER
  eqlApplianceDescription DisplayString
  eqlApplianceMgmtAddressType InetAddressType
  eqlApplianceMgmtAddress InetAddress
  eqlApplianceMgmtPort Unsigned32
  eqlApplianceMajorVersion Unsigned32
  eqlApplianceMinorVersion Unsigned32
  eqlApplianceMaintVersion Unsigned32
  eqlApplianceVendorId OCTET STRING
  eqlApplianceSharedSecret OCTET STRING
  eqlApplianceUserName UTFString
  eqlApplianceNumberOfNodes Unsigned32
  eqlApplianceUniqueID Unsigned32
  eqlApplianceConfigStatus Unsigned32
  eqlApplianceAction INTEGER
  eqlApplianceAdminStatus INTEGER
  eqlApplianceGatewayAddrType InetAddressType
  eqlApplianceGatewayAddr InetAddress
  eqlApplianceLastScheduleIndex Unsigned32
  eqlApplianceMPV Unsigned32
  eqlApplianceEnableFTP INTEGER
  eqlApplianceDesiredServiceMode INTEGER
  eqlApplianceServiceModeStatus INTEGER
  eqlApplianceRequestId Counter64

EqlApplianceUniqueIDEntry  
SEQUENCE    
  eqlApplianceUniqueIDType INTEGER
  eqlApplianceUniqueIDValueLen Unsigned32
  eqlApplianceUniqueIDValue OCTET STRING

EqlApplianceUnInitNodesEntry  
SEQUENCE    
  eqlApplianceUnInitNodeProductType INTEGER
  eqlApplianceUnInitNodeServiceTag OCTET STRING
  eqlApplianceUnInitNodeState INTEGER
  eqlApplianceUnInitNodeModel OCTET STRING
  eqlApplianceUnInitNodeVendor OCTET STRING
  eqlApplianceUnInitNodeLinkLocalIPType InetAddressType
  eqlApplianceUnInitNodeLinkLocalIP InetAddress
  eqlApplianceUnInitNodeMajorVersion Unsigned32
  eqlApplianceUnInitNodeMinorVersion Unsigned32
  eqlApplianceUnInitNodeMaintVersion Unsigned32
  eqlApplianceUnInitNodeRowStatus RowStatus
  eqlApplianceUnInitNodeClusterMPV Unsigned32
  eqlApplianceUnInitNodeChassisTag OCTET STRING

EqlApplianceNodeEntry  
SEQUENCE    
  eqlApplianceNodeIndex Unsigned32
  eqlApplianceNodeRowStatus RowStatus
  eqlApplianceNodeProductType INTEGER
  eqlApplianceNodeServiceTag OCTET STRING
  eqlApplianceNodeModel OCTET STRING
  eqlApplianceNodeVendor OCTET STRING
  eqlApplianceNodeLinkLocalIPType InetAddressType
  eqlApplianceNodeLinkLocalIP InetAddress
  eqlApplianceNodeMajorVersion Unsigned32
  eqlApplianceNodeMinorVersion Unsigned32
  eqlApplianceNodeMaintVersion Unsigned32
  eqlApplianceNodeName DisplayString
  eqlApplianceNodePeerIndex Unsigned32
  eqlApplianceNodeConfigState INTEGER
  eqlApplianceNodeConfigStatus Unsigned32
  eqlApplianceNodeGatewayAddrType InetAddressType
  eqlApplianceNodeGatewayAddr InetAddress
  eqlApplianceNodeInitiatorName OCTET STRING
  eqlApplianceNodeAdminStatus INTEGER
  eqlApplianceNodeChassisTag OCTET STRING
  eqlApplianceNodeChassisName OCTET STRING
  eqlApplianceNodeOpsRequestId Counter64

EqlApplianceNetworksEntry  
SEQUENCE    
  eqlApplianceNetworkRowStatus RowStatus
  eqlApplianceNetworkType INTEGER
  eqlApplianceNetworkID Unsigned32
  eqlApplianceNetworkName OCTET STRING
  eqlApplianceNetworkBlockIPAddressType InetAddressType
  eqlApplianceNetworkBlockIPAddress InetAddress
  eqlApplianceNetworkBlockNetmaskAddrType InetAddressType
  eqlApplianceNetworkBlockNetmaskAddr InetAddress
  eqlApplianceNetworkVLANTag Unsigned32
  eqlApplianceNetworkAdminState INTEGER
  eqlApplianceNetworkMTUSize Unsigned32
  eqlApplianceNetworkBondingMode INTEGER

EqlApplianceIPEntry  
SEQUENCE    
  eqlApplianceIPRowStatus RowStatus
  eqlApplianceIPAddressType InetAddressType
  eqlApplianceIPAddress InetAddress

EqlApplianceNodeIPEntry  
SEQUENCE    
  eqlApplianceNodeIPRowStatus RowStatus
  eqlApplianceNodeIPAddressType InetAddressType
  eqlApplianceNodeIPAddress InetAddress

EqlApplianceOpsEntry  
SEQUENCE    
  eqlApplianceOpsIndex Unsigned32
  eqlApplianceOpsRowStatus RowStatus
  eqlApplianceOpsType INTEGER
  eqlApplianceOpsStatus Unsigned32
  eqlApplianceOpsPercentage Unsigned32
  eqlApplianceOpsRequestId Counter64

EqlVolumeApplianceEntry  
SEQUENCE    
  eqlVolumeApplianceRowStatus RowStatus
  eqlVolumeApplianceIndex Unsigned32
  eqlVolumeApplianceNodeIndex Unsigned32
  eqlVolumeApplianceState INTEGER

EqlApplianceOpsFailureEntry  
SEQUENCE    
  eqlApplianceOpsFailureIndex Unsigned32
  eqlApplianceOpsFailureType INTEGER
  eqlApplianceOpsFailureScope Unsigned32
  eqlApplianceOpsFailureCode Unsigned32
  eqlApplianceOpsFailureComponent INTEGER
  eqlApplianceOpsFailureSubComponent OCTET STRING
  eqlApplianceOpsFailureMessage OCTET STRING

EqlApplianceNodeHealthFailureEntry  
SEQUENCE    
  eqlApplianceNodeHealthFailureIndex Unsigned32
  eqlApplianceNodeHealthFailureType INTEGER
  eqlApplianceNodeHealthFailureCode Unsigned32
  eqlApplianceNodeHealthFailureComponent INTEGER
  eqlApplianceNodeHealthFailureSubComponent OCTET STRING
  eqlApplianceNodeHealthFailureMessage OCTET STRING

EqlApplianceServiceStatusEntry  
SEQUENCE    
  eqlApplianceOverallState INTEGER
  eqlApplianceServiceStatus INTEGER
  eqlApplianceServiceCriticalConditions BITS
  eqlApplianceServiceWarningConditions BITS
  eqlApplianceServiceAction INTEGER

EqlApplianceStatsEntry  
SEQUENCE    
  eqlApplianceStatsTotalCapacity Counter64
  eqlApplianceStatsTotalAllocated Counter64
  eqlApplianceStatsTotalUsed Counter64
  eqlApplianceStatsTotalFree Counter64
  eqlApplianceStatsTotalSnapshots Counter64
  eqlApplianceStatsNumberOfContainers Counter64
  eqlApplianceStatsNumberOfNfsExports Counter64
  eqlApplianceStatsNumberOfCifsShares Counter64
  eqlApplianceStatsNumberOfSnapshots Counter64
  eqlApplianceStatsTotalOptimizationSpaceSavings Counter64

EqlApplianceNodeStatusEntry  
SEQUENCE    
  eqlApplianceNodeStatusNodeState INTEGER

EqlApplianceMultiStateOpsEntry  
SEQUENCE    
  eqlApplianceMultiStateOpsIndex Unsigned32
  eqlApplianceMultiStateOpsRowStatus RowStatus
  eqlApplianceMultiStateOpsType INTEGER
  eqlApplianceMultiStateOpsStatus Unsigned32
  eqlApplianceMultiStateOpsServiceTag OCTET STRING
  eqlApplianceMultiStateOpsServiceTag2 OCTET STRING
  eqlApplianceMultiStateOpsNodeIndex Unsigned32
  eqlApplianceMultiStateOpsNodeIndex2 Unsigned32
  eqlApplianceMultiStateOpsState INTEGER
  eqlApplianceMultiStateOpsPercentage Unsigned32
  eqlApplianceMultiStateOpsAction INTEGER
  eqlApplianceMultiStateOpsCurNodeIndex Unsigned32
  eqlApplianceMultiStateOpsLongRunningOp TruthValue
  eqlApplianceMultiStateOpsRequestId Counter64

EqlApplianceNdmpEntry  
SEQUENCE    
  eqlApplianceNdmpRowStatus RowStatus
  eqlApplianceNdmpUserName DisplayString
  eqlApplianceNdmpPasswd DisplayString
  eqlApplianceNdmpDesiredState INTEGER
  eqlApplianceNdmpClientPort INTEGER

EqlApplianceNdmpDmaServerEntry  
SEQUENCE    
  eqlApplianceNdmpDmaServerRowStatus RowStatus
  eqlApplianceNdmpDmaServerIPAddressType InetAddressType
  eqlApplianceNdmpDmaServerIPAddress InetAddress
  eqlApplianceNdmpDmaServerTransactionState INTEGER

EqlApplianceLocalUserAccessEntry  
SEQUENCE    
  eqlApplianceLocalUserAccessRowStatus RowStatus
  eqlApplianceLocalUserName OCTET STRING
  eqlApplianceLocalUserPassword OCTET STRING
  eqlApplianceLocalUserUid Unsigned32
  eqlApplianceLocalUserPrimaryGroup OCTET STRING
  eqlApplianceLocalUserRealName OCTET STRING
  eqlApplianceLocalUserSid OCTET STRING
  eqlApplianceLocalUserRemarks OCTET STRING
  eqlApplianceLocalUserAdditionalGroups OCTET STRING
  eqlApplianceLocalUserAccess INTEGER

EqlApplianceLocalGroupAccessEntry  
SEQUENCE    
  eqlApplianceLocalGroupAccessRowStatus RowStatus
  eqlApplianceLocalGroupName OCTET STRING
  eqlApplianceLocalGroupGid Unsigned32
  eqlApplianceLocalGroupGsid OCTET STRING

EqlApplianceCredentialsDatabaseEntry  
SEQUENCE    
  eqlApplianceCredentialsDatabaseRowStatus RowStatus
  eqlApplianceCredentialsDatabaseType INTEGER
  eqlApplianceCredentialsDatabaseLdapBaseDn OCTET STRING
  eqlApplianceCredentialsDatabaseLdapServerAddress OCTET STRING
  eqlApplianceCredentialsDatabaseNisDomain OCTET STRING
  eqlApplianceCredentialsDatabaseNisServerAddress OCTET STRING

EqlApplianceActiveDirectoryAccessEntry  
SEQUENCE    
  eqlApplianceActiveDirectoryRowStatus RowStatus
  eqlApplianceActiveDirectoryAdvancedSettings INTEGER
  eqlApplianceActiveDirectoryNetBiosName OCTET STRING
  eqlApplianceActiveDirectoryDomain OCTET STRING
  eqlApplianceActiveDirectoryUserName OCTET STRING
  eqlApplianceActiveDirectoryPassword OCTET STRING
  eqlApplianceActiveDirectoryDescription OCTET STRING
  eqlApplianceActiveDirectoryFunctionalLevel OCTET STRING
  eqlApplianceActiveDirectoryWinsServer OCTET STRING
  eqlApplianceActiveDirectoryWorkGroup OCTET STRING
  eqlApplianceActiveDirectoryDomainControllers OCTET STRING
  eqlApplianceActiveDirectoryMemberOfDomain OCTET STRING
  eqlApplianceActiveDirectoryStatus INTEGER
  eqlApplianceActiveDirectoryAccessibleControllers OCTET STRING
  eqlApplianceActiveDirectoryPreferredControllers OCTET STRING

EqlApplianceManualMappingEntry  
SEQUENCE    
  eqlApplianceManualMappingRowStatus RowStatus
  eqlApplianceManualMappingUserName OCTET STRING
  eqlApplianceManualMappingMappedToUserName OCTET STRING
  eqlApplianceManualMappingDirection INTEGER

EqlApplianceMappingPolicyEntry  
SEQUENCE    
  eqlApplianceMappingPolicyRowStatus RowStatus
  eqlApplianceMappingPolicyAcquireMapping INTEGER
  eqlApplianceMappingPolicyAllowNotMapped INTEGER

EqlApplianceAllGroupsEntry  
SEQUENCE    
  eqlApplianceAllGroupsRowStatus RowStatus
  eqlApplianceAllGroupsName OCTET STRING
  eqlApplianceAllGroupsId OCTET STRING
  eqlApplianceAllGroupsType INTEGER
  eqlApplianceAllGroupsSource INTEGER

EqlApplianceAllUsersEntry  
SEQUENCE    
  eqlApplianceAllUsersRowStatus RowStatus
  eqlApplianceAllUsersName OCTET STRING
  eqlApplianceAllUsersId OCTET STRING
  eqlApplianceAllUsersType INTEGER
  eqlApplianceAllUsersSource INTEGER

EqlApplianceEQLMemberMPVEntry  
SEQUENCE    
  eqlApplianceEQLMemberMPV Unsigned32

EqlApplianceMPVEntry  
SEQUENCE    
  eqlApplianceEQLGroupMPV Unsigned32
  eqlApplianceClusterMPV Unsigned32
  eqlApplianceClusterMajorVersion Unsigned32
  eqlApplianceClusterMinorVersion Unsigned32
  eqlApplianceClusterMaintVersion Unsigned32

EqlApplianceSyncedDataEntry  
SEQUENCE    
  eqlApplianceSyncedDataRowStatus RowStatus
  eqlApplianceSyncedDataType INTEGER
  eqlApplianceSyncedDataIndex Unsigned32
  eqlApplianceSyncedDataIndexPayload OCTET STRING
  eqlApplianceSyncedDataEntryPayload OCTET STRING
  eqlApplianceSyncedDataState INTEGER

EqlApplianceCIFSProtocolEntry  
SEQUENCE    
  eqlApplianceCIFSProtocolRowStatus RowStatus
  eqlApplianceCIFSProtocolAuthenticationEnabled TruthValue
  eqlApplianceCIFSProtocolAuthenticationType INTEGER
  eqlApplianceCIFSProtocolAllowGuests TruthValue
  eqlApplianceCIFSProtocolMaxConnections Unsigned32
  eqlApplianceCIFSProtocolUnixCharacterSet INTEGER
  eqlApplianceCIFSProtocolDosCodePage INTEGER

EqlApplianceOptimizationScheduleEntry  
SEQUENCE    
  eqlApplianceOptimizationScheduleRowStatus RowStatus
  eqlApplianceOptimizationScheduleStatus TruthValue
  eqlApplianceOptimizationContainerIndex Unsigned32
  eqlApplianceOptimizationPolicyIndex Integer32

EqlApplianceAdminAccountEntry  
SEQUENCE    
  eqlApplianceAdminAccountName DisplayString
  eqlApplianceAdminAccountRowStatus RowStatus
  eqlApplianceAdminAccountPassword OCTET STRING

EqlApplianceLicenseEntry  
SEQUENCE    
  eqlApplianceLicenseRowStatus RowStatus
  eqlApplianceLicenseFeatureId INTEGER
  eqlApplianceLicenseEntitlementId OCTET STRING
  eqlApplianceLicenseState INTEGER
  eqlApplianceLicenseExpiry Counter32
  eqlApplianceLicenseUsed TruthValue
  eqlApplianceLicenseType INTEGER

EqlApplianceLicenseFileEntry  
SEQUENCE    
  eqlApplianceLicenseFileRowStatus RowStatus
  eqlApplianceLicenseFileName OCTET STRING

EqlApplianceTypeEQLMemberMPVEntry  
SEQUENCE    
  eqlApplianceTypeEQLMemberMPV Unsigned32

EqlApplianceTypeEQLGroupMPVEntry  
SEQUENCE    
  eqlApplianceTypeEQLGroupMPV Unsigned32

EqlApplianceVolumeDiscoveryEntry  
SEQUENCE    
  eqlApplianceVolumeDiscoveryRowStatus RowStatus
  eqlApplianceVolumeDiscoveryVolumeNodeAccessibleStatus INTEGER
  eqlApplianceVolumeDiscoveryVolumeStatus INTEGER
  eqlApplianceVolumeDiscoveryVolumeLunNumber Unsigned32

EqlApplianceInitiatorsEntry  
SEQUENCE    
  eqlApplianceInitiatorRowStatus RowStatus
  eqlApplianceInitiatorName OCTET STRING

EqlApplianceUserQueryEntry  
SEQUENCE    
  eqlApplianceUserQuerySearchString OCTET STRING
  eqlApplianceUserQueryDBType INTEGER
  eqlApplianceUserQueryPageSize Unsigned32
  eqlApplianceUserQueryPageNumber Unsigned32
  eqlApplianceUserQueryUserDomain OCTET STRING
  eqlApplianceUserQueryUserName OCTET STRING
  eqlApplianceUserQueryRowStatus RowStatus
  eqlApplianceUserQueryTotalUsers Unsigned32
  eqlApplianceUserQueryUserId OCTET STRING
  eqlApplianceUserQueryUserPrimaryGroup OCTET STRING
  eqlApplianceUserQueryUserType INTEGER
  eqlApplianceUserQueryUserSource INTEGER

EqlApplianceDnsServerEntry  
SEQUENCE    
  eqlApplianceDnsServerIndex Unsigned32
  eqlApplianceDnsServerRowStatus RowStatus
  eqlApplianceDnsServerInetAddressType InetAddressType
  eqlApplianceDnsServerInetAddress InetAddress
  eqlApplianceDnsServerTransactionState INTEGER

EqlApplianceDnsSuffixEntry  
SEQUENCE    
  eqlApplianceDnsSuffixIndex Unsigned32
  eqlApplianceDnsSuffixRowStatus RowStatus
  eqlApplianceDnsSuffixString DisplayString
  eqlApplianceDnsSuffixTransactionState INTEGER

EqlApplianceDomainListEntry  
SEQUENCE    
  eqlApplianceDomainName OCTET STRING
  eqlApplianceDomainType INTEGER

EqlApplianceGroupQueryEntry  
SEQUENCE    
  eqlApplianceGroupQuerySearchString OCTET STRING
  eqlApplianceGroupQueryDBType INTEGER
  eqlApplianceGroupQueryPageSize Unsigned32
  eqlApplianceGroupQueryPageNumber Unsigned32
  eqlApplianceGroupQueryDomain OCTET STRING
  eqlApplianceGroupQueryGroupName OCTET STRING
  eqlApplianceGroupQueryRowStatus RowStatus
  eqlApplianceGroupQueryTotalGroups Unsigned32
  eqlApplianceGroupQueryGroupId OCTET STRING
  eqlApplianceGroupQueryGroupType INTEGER
  eqlApplianceGroupQueryGroupSource INTEGER

Defined Values

eqlApplianceModule 1.3.6.1.4.1.12740.17
Appliances information. Copyright (c) 2004-2013 by Dell Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell Inc.
MODULE-IDENTITY    

eqlApplianceObjects 1.3.6.1.4.1.12740.17.1
OBJECT IDENTIFIER    

eqlApplianceTable 1.3.6.1.4.1.12740.17.1.1
EqualLogic-Persistent Appliance Table. This table contains a list of appliances that this group is managing. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceEntry

eqlApplianceEntry 1.3.6.1.4.1.12740.17.1.1.1
An entry (row) containing appliance information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceEntry  

eqlApplianceIndex 1.3.6.1.4.1.12740.17.1.1.1.1
This field specifies a unique index for identifing a Appliance.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceRowStatus 1.3.6.1.4.1.12740.17.1.1.1.2
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceName 1.3.6.1.4.1.12740.17.1.1.1.3
EQL-SECONDARY-KEY This field specifies a user friendly name for an appliance. Allowed characters are alphanumeric and underscore for spartan.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceType 1.3.6.1.4.1.12740.17.1.1.1.4
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER nas(1), blade-chassis(2)  

eqlApplianceState 1.3.6.1.4.1.12740.17.1.1.1.5
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unconfigured(0), node-setup(1000), internal-network(1001), san-network(1002), client-network(1003), configure-gateway(1004), start-nodes-validation(1005), nodes-validation-inprogress(1006), make-cluster(1007), send-eql-group-ip(1008), create-volume-acls(1009), start-format(1010), format-in-progress(1011), start-system(1012), start-system-in-progress(1013), configured(1014), cluster-name(1015), start-nas-appliance-create(1016), nas-appliance-create-in-progress(1017), start-volume-discovery(1018)  

eqlApplianceDescription 1.3.6.1.4.1.12740.17.1.1.1.6
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

eqlApplianceMgmtAddressType 1.3.6.1.4.1.12740.17.1.1.1.7
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlApplianceMgmtAddress 1.3.6.1.4.1.12740.17.1.1.1.8
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlApplianceMgmtPort 1.3.6.1.4.1.12740.17.1.1.1.9
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMajorVersion 1.3.6.1.4.1.12740.17.1.1.1.10
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMinorVersion 1.3.6.1.4.1.12740.17.1.1.1.11
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMaintVersion 1.3.6.1.4.1.12740.17.1.1.1.12
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceVendorId 1.3.6.1.4.1.12740.17.1.1.1.13
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

eqlApplianceSharedSecret 1.3.6.1.4.1.12740.17.1.1.1.14
This field is used for shared secret authentication.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

eqlApplianceUserName 1.3.6.1.4.1.12740.17.1.1.1.15
This field is used for authentication.
Status: current Access: read-create
OBJECT-TYPE    
  UTFString Size(0..64)  

eqlApplianceNumberOfNodes 1.3.6.1.4.1.12740.17.1.1.1.16
Number of nodes in this appliance.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceUniqueID 1.3.6.1.4.1.12740.17.1.1.1.17
Unique ID used by this appliance.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceConfigStatus 1.3.6.1.4.1.12740.17.1.1.1.18
status of this appliance configuration
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceAction 1.3.6.1.4.1.12740.17.1.1.1.19
Action on this appliance.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), start(1), retry(2), abort(3), continue(4)  

eqlApplianceAdminStatus 1.3.6.1.4.1.12740.17.1.1.1.20
Admin status used to manage this appliance.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER down(0), up(1), maintenance(2), delete(3)  

eqlApplianceGatewayAddrType 1.3.6.1.4.1.12740.17.1.1.1.21
This field specifies the type of address (v4/v6) of the default gateway address for this appliance.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlApplianceGatewayAddr 1.3.6.1.4.1.12740.17.1.1.1.22
This field contains the address specification of the default gateway address for this appliance.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlApplianceLastScheduleIndex 1.3.6.1.4.1.12740.17.1.1.1.23
Last used snapshot schedule index. Every time a new schedule is created for the appliance, the new idex is the last used index value from this field plus one, and the field itself is updated with the new value. This way the schedule index will never repeat (reused) for the appliance.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMPV 1.3.6.1.4.1.12740.17.1.1.1.24
Management Protocol Version (MPV) of this appliance.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceEnableFTP 1.3.6.1.4.1.12740.17.1.1.1.25
This field specifies whether or not to allow ftp access to the appliance. The default is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

eqlApplianceDesiredServiceMode 1.3.6.1.4.1.12740.17.1.1.1.26
Desired service mode of the appliance.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), maintenance(1)  

eqlApplianceServiceModeStatus 1.3.6.1.4.1.12740.17.1.1.1.27
This field specifies the service mode status of the appliance.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), maintenance(1), transition-to-maint(2), transition-to-normal(3)  

eqlApplianceRequestId 1.3.6.1.4.1.12740.17.1.1.1.28
This field represents the operation request identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceUniqueIDTable 1.3.6.1.4.1.12740.17.1.2
EqualLogic-Dynamic Unique ID table. This table is used to retrieve Unique ID values when creating new objects. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceUniqueIDEntry

eqlApplianceUniqueIDEntry 1.3.6.1.4.1.12740.17.1.2.1
An entry (row) containing unique ID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceUniqueIDEntry  

eqlApplianceUniqueIDType 1.3.6.1.4.1.12740.17.1.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER fsid(1), userid(2), nfsexportname(3), partnershipid(4), replicationid(5)  

eqlApplianceUniqueIDValueLen 1.3.6.1.4.1.12740.17.1.2.1.2
Length of the value represented by column eqlApplianceUniqueIDValue
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceUniqueIDValue 1.3.6.1.4.1.12740.17.1.2.1.3
Value of eqlApplianceUniqueIDType represented in network byte order.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(255)  

eqlApplianceUnInitNodesTable 1.3.6.1.4.1.12740.17.1.3
EqualLogic-Persistent Uninitialized Nodes Table. This table contains information relating to uninitialized appliances discovered during the device discovery process. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceUnInitNodesEntry

eqlApplianceUnInitNodesEntry 1.3.6.1.4.1.12740.17.1.3.1
An entry (row) containing uninitialized appliance information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceUnInitNodesEntry  

eqlApplianceUnInitNodeProductType 1.3.6.1.4.1.12740.17.1.3.1.1
This field indicates the type of device that has been discovered
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nas(1)  

eqlApplianceUnInitNodeServiceTag 1.3.6.1.4.1.12740.17.1.3.1.2
This field indicates the service tag of the discovered device
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

eqlApplianceUnInitNodeState 1.3.6.1.4.1.12740.17.1.3.1.3
This field indicates the current state of the device (discover or found)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER discover(1), found(2)  

eqlApplianceUnInitNodeModel 1.3.6.1.4.1.12740.17.1.3.1.4
This field indicates the model of the discovered device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceUnInitNodeVendor 1.3.6.1.4.1.12740.17.1.3.1.5
This field indicates the vendor of the discovered device
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceUnInitNodeLinkLocalIPType 1.3.6.1.4.1.12740.17.1.3.1.6
This field indicates the address type (v4/v6) of the link-local IP associated with the discovered device
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

eqlApplianceUnInitNodeLinkLocalIP 1.3.6.1.4.1.12740.17.1.3.1.7
This field indicates the link-local IP of the device, as returned during the device-discover process
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

eqlApplianceUnInitNodeMajorVersion 1.3.6.1.4.1.12740.17.1.3.1.8
This field indicates the major version of the device discovered
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceUnInitNodeMinorVersion 1.3.6.1.4.1.12740.17.1.3.1.9
This field indicates the minor version of the device discovered
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceUnInitNodeMaintVersion 1.3.6.1.4.1.12740.17.1.3.1.10
This field indicates the maintenance version of the device discovered
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceUnInitNodeRowStatus 1.3.6.1.4.1.12740.17.1.3.1.11
This is used only for support purpose to delete rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceUnInitNodeClusterMPV 1.3.6.1.4.1.12740.17.1.3.1.12
The Management Protocol Version (MPV) the Appliance Cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceUnInitNodeChassisTag 1.3.6.1.4.1.12740.17.1.3.1.13
This field indicates the service tag of the discovered device chassis
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

eqlApplianceNodeTable 1.3.6.1.4.1.12740.17.1.4
EqualLogic-Persistent Appliance Node Table This table is used to store information about Appliance nodes. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceNodeEntry

eqlApplianceNodeEntry 1.3.6.1.4.1.12740.17.1.4.1
An entry (row) containing an node-specific configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceNodeEntry  

eqlApplianceNodeIndex 1.3.6.1.4.1.12740.17.1.4.1.1
A unique identifier for each configured node within an appliance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNodeRowStatus 1.3.6.1.4.1.12740.17.1.4.1.2
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceNodeProductType 1.3.6.1.4.1.12740.17.1.4.1.3
This field indicates the type of device that has been discovered
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fs7500(1), fs7600(2), fs7610(3)  

eqlApplianceNodeServiceTag 1.3.6.1.4.1.12740.17.1.4.1.4
This field indicates the service tag of the discovered device
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

eqlApplianceNodeModel 1.3.6.1.4.1.12740.17.1.4.1.5
This field indicates the model of the discovered device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceNodeVendor 1.3.6.1.4.1.12740.17.1.4.1.6
This field indicates the vendor of the discovered device
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceNodeLinkLocalIPType 1.3.6.1.4.1.12740.17.1.4.1.7
This field indicates the address type (v4/v6) of the link-local IP associated with the discovered device
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

eqlApplianceNodeLinkLocalIP 1.3.6.1.4.1.12740.17.1.4.1.8
This field indicates the link-local IP of the device, as returned during the device-discover process
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

eqlApplianceNodeMajorVersion 1.3.6.1.4.1.12740.17.1.4.1.9
This field indicates the major version of the device discovered
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNodeMinorVersion 1.3.6.1.4.1.12740.17.1.4.1.10
This field indicates the minor version of the device discovered
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNodeMaintVersion 1.3.6.1.4.1.12740.17.1.4.1.11
This field indicates the maintenance version of the device discovered
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNodeName 1.3.6.1.4.1.12740.17.1.4.1.12
This field specifies the name used to manage this node.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlApplianceNodePeerIndex 1.3.6.1.4.1.12740.17.1.4.1.13
This field specifies the NodeIndex value of peer node if any.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNodeConfigState 1.3.6.1.4.1.12740.17.1.4.1.14
This field specifies what configuration state the node is in.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unconfigured(0), node-setup-complete(1001), internal-network-complete(1002), san-network-complete(1003), client-network-complete(1004), gateway-config-complete(1005), configured(1006), detached(1007)  

eqlApplianceNodeConfigStatus 1.3.6.1.4.1.12740.17.1.4.1.15
Status of current config state.If not zero, then an error occured in configuration
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNodeGatewayAddrType 1.3.6.1.4.1.12740.17.1.4.1.16
This field specifies the type of address (v4/v6) of the default gateway address for this node
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlApplianceNodeGatewayAddr 1.3.6.1.4.1.12740.17.1.4.1.17
This field contains the address specification of the default gateway address for this node.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlApplianceNodeInitiatorName 1.3.6.1.4.1.12740.17.1.4.1.18
The iSCSI name of this node.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..223)  

eqlApplianceNodeAdminStatus 1.3.6.1.4.1.12740.17.1.4.1.19
Start node detach operation or attach operation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER on(0), detach(1), attach(2), reset(3)  

eqlApplianceNodeChassisTag 1.3.6.1.4.1.12740.17.1.4.1.20
This field indicates the service tag of the discovered device chasis
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

eqlApplianceNodeChassisName 1.3.6.1.4.1.12740.17.1.4.1.21
This field indicates the configured chassis name the discovered device chasis
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

eqlApplianceNodeOpsRequestId 1.3.6.1.4.1.12740.17.1.4.1.22
This field represents the the operation request identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceNetworksTable 1.3.6.1.4.1.12740.17.1.5
EqualLogic-Dynamic(semi) Appliance Networks Table EqualLogic-DoNotGroupRequest This table is used to retrieve network configuration information for an appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceNetworksEntry

eqlApplianceNetworksEntry 1.3.6.1.4.1.12740.17.1.5.1
An entry (row) containing a description of network configurations of an appliance.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceNetworksEntry  

eqlApplianceNetworkRowStatus 1.3.6.1.4.1.12740.17.1.5.1.1
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceNetworkType 1.3.6.1.4.1.12740.17.1.5.1.2
This field indicates the type of network being described by this entry
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER internal(1), san(2), client(3), backplane(4)  

eqlApplianceNetworkID 1.3.6.1.4.1.12740.17.1.5.1.3
A unique identifier for each configured network within a network type and appliance
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNetworkName 1.3.6.1.4.1.12740.17.1.5.1.4
This field specifies a user friendly name for a network.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceNetworkBlockIPAddressType 1.3.6.1.4.1.12740.17.1.5.1.5
This field specifies the type of address (v4/v6) of the block IP address
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlApplianceNetworkBlockIPAddress 1.3.6.1.4.1.12740.17.1.5.1.6
This field contains the address specification for the block of IPs describing this network
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlApplianceNetworkBlockNetmaskAddrType 1.3.6.1.4.1.12740.17.1.5.1.7
This field specifies the type of address (v4/v6) of the netmask address for this network
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlApplianceNetworkBlockNetmaskAddr 1.3.6.1.4.1.12740.17.1.5.1.8
This field contains the address specification of the netmask describing this network
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlApplianceNetworkVLANTag 1.3.6.1.4.1.12740.17.1.5.1.9
This field specifies the VLAN tag applicable to this network.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4095  

eqlApplianceNetworkAdminState 1.3.6.1.4.1.12740.17.1.5.1.10
This field indicates the current administrative state of this network entry
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER creating(1), modifying(2), done(3)  

eqlApplianceNetworkMTUSize 1.3.6.1.4.1.12740.17.1.5.1.11
This field indicates the MTU size supported by this network.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNetworkBondingMode 1.3.6.1.4.1.12740.17.1.5.1.12
This field indicates the bonding mode supported by this network. For spartan, only client network supports modifying the bonding mode.Default mode is ALB (adaptive load balancing) for client network. User can change this mode to LACP(802.3 ad) later.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER alb(0), lacp(1)  

eqlApplianceIPTable 1.3.6.1.4.1.12740.17.1.6
EqualLogic-Dynamic(semi) Appliance IP Table This table is used to retrieve appliance-wide IP addresses TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceIPEntry

eqlApplianceIPEntry 1.3.6.1.4.1.12740.17.1.6.1
An entry (row) containing an appliance-wide IP address configured for an appliance network.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceIPEntry  

eqlApplianceIPRowStatus 1.3.6.1.4.1.12740.17.1.6.1.1
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceIPAddressType 1.3.6.1.4.1.12740.17.1.6.1.2
This field specifies the type of address (v4/v6) of this IP address entry
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

eqlApplianceIPAddress 1.3.6.1.4.1.12740.17.1.6.1.3
This field contains the address specification of this IP address entry
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

eqlApplianceNodeIPTable 1.3.6.1.4.1.12740.17.1.7
EqualLogic-Dynamic(semi) Appliance Node IP Table This table is used to retrieve node-specific IP addresses configured with a specific appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceNodeIPEntry

eqlApplianceNodeIPEntry 1.3.6.1.4.1.12740.17.1.7.1
An entry (row) containing an node-specific IP address configured for an appliance network.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceNodeIPEntry  

eqlApplianceNodeIPRowStatus 1.3.6.1.4.1.12740.17.1.7.1.1
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceNodeIPAddressType 1.3.6.1.4.1.12740.17.1.7.1.2
This field specifies the type of address (v4/v6) of this node-specific IP address entry
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

eqlApplianceNodeIPAddress 1.3.6.1.4.1.12740.17.1.7.1.3
This field contains the address specification of this node-specific IP address entry
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

eqlApplianceOpsTable 1.3.6.1.4.1.12740.17.1.8
EqualLogic-Dynamic(semi) Appliance operations table This table is used to manage operations on appliances. For example: In Spartan, operations include validation,format etc. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceOpsEntry

eqlApplianceOpsEntry 1.3.6.1.4.1.12740.17.1.8.1
An entry (row) containing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceOpsEntry  

eqlApplianceOpsIndex 1.3.6.1.4.1.12740.17.1.8.1.1
This field specifies a unique index for identifing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceOpsRowStatus 1.3.6.1.4.1.12740.17.1.8.1.2
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceOpsType 1.3.6.1.4.1.12740.17.1.8.1.3
This field specifies the type of operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER none(0), validation(1), format(2), start(3), stop(4), attach(5), expand(6), incrementalformat(7), detach(8), add-pair(9), delete(10), create-nas-appliance(11), discover(12), add-nas-appliance(13), join-nas-appliance(14), diagnostics(15), nas-cluster-update(16), restore-config(17), service-mode-change(18), container-cfg-modify(19)  

eqlApplianceOpsStatus 1.3.6.1.4.1.12740.17.1.8.1.4
This field represents the current status of this operation. In case of errors, this value will represent the error number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceOpsPercentage 1.3.6.1.4.1.12740.17.1.8.1.5
This field represents the % of completion for this operation.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

eqlApplianceOpsRequestId 1.3.6.1.4.1.12740.17.1.8.1.6
This field represents the operation request identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlVolumeApplianceTable 1.3.6.1.4.1.12740.17.1.9
EqualLogic-Persistent Appliance Volumes table This table is used to store what volumes are accessed by which appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlVolumeApplianceEntry

eqlVolumeApplianceEntry 1.3.6.1.4.1.12740.17.1.9.1
An entry (row) containing the appliance information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlVolumeApplianceEntry  

eqlVolumeApplianceRowStatus 1.3.6.1.4.1.12740.17.1.9.1.1
This field is used to manage the rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlVolumeApplianceIndex 1.3.6.1.4.1.12740.17.1.9.1.2
This field specifies the appliance index this volume is associated with. This value will never be zero.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlVolumeApplianceNodeIndex 1.3.6.1.4.1.12740.17.1.9.1.3
This field specifies the node index this volume is associated with. This value will be zero if this volume is not associated with a particular node.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlVolumeApplianceState 1.3.6.1.4.1.12740.17.1.9.1.4
This field specifies the state of this volume as seen by the appliance.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER formatpending(0), formatted(1), expansionpending(2)  

eqlApplianceOpsFailureTable 1.3.6.1.4.1.12740.17.1.10
EqualLogic-Dynamic Appliance operations failures table This table is used to retrieve failure information related to an appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceOpsFailureEntry

eqlApplianceOpsFailureEntry 1.3.6.1.4.1.12740.17.1.10.1
An entry (row) containing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceOpsFailureEntry  

eqlApplianceOpsFailureIndex 1.3.6.1.4.1.12740.17.1.10.1.1
This field specifies a unique index for identifing an operation failure.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceOpsFailureType 1.3.6.1.4.1.12740.17.1.10.1.2
This field specifies the type of operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), error(1), warning(2)  

eqlApplianceOpsFailureScope 1.3.6.1.4.1.12740.17.1.10.1.3
This field represents the scope of this failure. For spartan, 0 indicates scope of cluster. Non zero indicates the node index this failure is related to.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceOpsFailureCode 1.3.6.1.4.1.12740.17.1.10.1.4
Error code related to this failure.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceOpsFailureComponent 1.3.6.1.4.1.12740.17.1.10.1.5
Component related to this failure.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), fans(1), psus(2), cpus(3), fc(4), monitor(5), nics(6), ipmi(7), ups(8), temperatures(9), raid(10), memory(11), connectivity(12), network(13)  

eqlApplianceOpsFailureSubComponent 1.3.6.1.4.1.12740.17.1.10.1.6
This field specifies a user friendly name for the sub-components, e.g. eth32, eth33.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

eqlApplianceOpsFailureMessage 1.3.6.1.4.1.12740.17.1.10.1.7
This field contains the error message sent by the NAS cluster or controllers.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

eqlApplianceNodeHealthFailureTable 1.3.6.1.4.1.12740.17.1.11
EqualLogic-Dynamic Appliance operations failures table This table is used to retrieve failure information related to an appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceNodeHealthFailureEntry

eqlApplianceNodeHealthFailureEntry 1.3.6.1.4.1.12740.17.1.11.1
An entry (row) containing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceNodeHealthFailureEntry  

eqlApplianceNodeHealthFailureIndex 1.3.6.1.4.1.12740.17.1.11.1.1
This field specifies a unique index for identifing an operation failure.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNodeHealthFailureType 1.3.6.1.4.1.12740.17.1.11.1.2
This field specifies the type of operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), error(1), warning(2)  

eqlApplianceNodeHealthFailureCode 1.3.6.1.4.1.12740.17.1.11.1.3
Error code related to this failure.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceNodeHealthFailureComponent 1.3.6.1.4.1.12740.17.1.11.1.4
Component related to this failure.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), power(1), network(2), internalhw(3)  

eqlApplianceNodeHealthFailureSubComponent 1.3.6.1.4.1.12740.17.1.11.1.5
This field specifies a user friendly name for the sub-component, e.g. eth32.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

eqlApplianceNodeHealthFailureMessage 1.3.6.1.4.1.12740.17.1.11.1.6
This field contains the error message sent by the NAS cluster or controllers.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

eqlApplianceServiceStatusTable 1.3.6.1.4.1.12740.17.1.12
EqualLogic-Dynamic Appliance service status table This table is used to retrieve service health status information related to an appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceServiceStatusEntry

eqlApplianceServiceStatusEntry 1.3.6.1.4.1.12740.17.1.12.1
An entry (row) containing service status of an appliance.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceServiceStatusEntry  

eqlApplianceOverallState 1.3.6.1.4.1.12740.17.1.12.1.1
This field indicates the overall status of the appliance.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), on(1), off(2), stopping(3)  

eqlApplianceServiceStatus 1.3.6.1.4.1.12740.17.1.12.1.2
This field indicates the service health status of the appliance.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), error(1), warning(2), normal(3)  

eqlApplianceServiceCriticalConditions 1.3.6.1.4.1.12740.17.1.12.1.3
This field indicates the current critical conditions associated with the appliance
Status: current Access: read-only
OBJECT-TYPE    
  BITS exaStoreServiceFaultCacheLoss(0), exaStoreServiceFaultServers(1), exaStoreServiceNoService(2), exaStoreServersFault(3), exaStoreStorageSubsysFault(4), eqlNASChassisClientNetworkCritical(5), eqlNASChassisBackplaneNetworkCritical(6), eqlNASChassisInternalNetworkCritical(7), eqlNASChassisSanNetworkCritical(8), eqlNASChassisFanCritical(9), eqlNASControllerAmbientTempCritical(10), eqlNASControllerBPSCritical(11), eqlNASControllerCPUCritical(12), eqlNASControllerFanCritical(13), eqlNASControllerLocalDiskCritical(14), eqlNASControllerRaidControllerCritical(15), eqlNASControllerMemoryCritical(16), eqlNASControllerVirtualDiskCritical(17)  

eqlApplianceServiceWarningConditions 1.3.6.1.4.1.12740.17.1.12.1.4
This field indicates the current warning conditions associated with the appliance
Status: current Access: read-only
OBJECT-TYPE    
  BITS exaStoreServiceFSCheckerFailed(0), exaStoreServicejournal(1), exaStoreServersSomeDown(2), exaStoreServersSomeDetached(3), exaStoreServersNotOptimal(4), exaStoreStorageSubsysNotOptimal(5), eqlNASChassisClientNetworkNotOptimal(6), eqlNASChassisBackplaneNetworkNotOptimal(7), eqlNASChassisInternalNetworkNotOptimal(8), eqlNASChassisSanNetworkNotOptimal(9), eqlNASChassisFanNotOptimal(10), eqlNASChassisPowerSupplyPartial(11), eqlNASControllerAmbientTempNotOptimal(12), eqlNASControllerBPSNotOptimal(13), eqlNASControllerCPUNotOptimal(14), eqlNASControllerFanNotOptimal(15), eqlNASControllerLocalDiskNotOptimal(16), eqlNASControllerRaidControllerNotOptimal(17), eqlNASControllerMemoryNotOptimal(18), eqlNASControllerVirtualDiskNotOptimal(19), eqlNASControllerPowerSupplyPartial(20)  

eqlApplianceServiceAction 1.3.6.1.4.1.12740.17.1.12.1.5
This field indicates the type of load balancing being requested
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER massFailback(1), massRebalance(2)  

eqlApplianceStatsTable 1.3.6.1.4.1.12740.17.1.13
EqualLogic-Dynamic Appliance operations failures table This table is used to retrieve failure information related to an appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceStatsEntry

eqlApplianceStatsEntry 1.3.6.1.4.1.12740.17.1.13.1
An entry (row) containing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceStatsEntry  

eqlApplianceStatsTotalCapacity 1.3.6.1.4.1.12740.17.1.13.1.1
This field represents the total capacity in MB. This is the space reserved for NAS i.e. the size of the NAS pool minus the size reserved by system for metadata. This represents the eqlNASAppliancePoolSize - MetaData size.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceStatsTotalAllocated 1.3.6.1.4.1.12740.17.1.13.1.2
This field is used indicate the total allocated space in mega bytes. This is the sum of the virtual volume (container) sizes. If there are 2 containers: container1 which is 10MB and container2 which is 30MB. The value of this field will be 40MB.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceStatsTotalUsed 1.3.6.1.4.1.12740.17.1.13.1.3
This field is used indicate the total mega bytes in use. It represents the total space used by all the containers and snapshots. If we are using 2MB of container1, 10MB of container2 and 1MB of the container2 space is used by snapshots. In that case, the value of this field will be 2+10+1=13MB.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceStatsTotalFree 1.3.6.1.4.1.12740.17.1.13.1.4
This field is used indicate the total mega bytes free. This field is the difference between the allocated space and used space i.e. TotalAllocatedSpace-TotalUsedSpace.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceStatsTotalSnapshots 1.3.6.1.4.1.12740.17.1.13.1.5
This field is used indicate the total mega bytes used by snapshots. This field represents the space used only by snapshots for all the containers in the NAS pool. If 1MB of container1 and 2MB of container2 is used by snapshots, and we have only 2 containers in the NAS pool, the value of this field is 1+2 = 3MB.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceStatsNumberOfContainers 1.3.6.1.4.1.12740.17.1.13.1.6
This field is used indicate the number containers.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceStatsNumberOfNfsExports 1.3.6.1.4.1.12740.17.1.13.1.7
This field is used indicate the number of Nfs exports on the appliance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceStatsNumberOfCifsShares 1.3.6.1.4.1.12740.17.1.13.1.8
This field is used indicate the number of Cifs exports on the appliance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceStatsNumberOfSnapshots 1.3.6.1.4.1.12740.17.1.13.1.9
This field is used indicate the number Snapshots for the appliance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceStatsTotalOptimizationSpaceSavings 1.3.6.1.4.1.12740.17.1.13.1.10
This field is used indicate the total mega bytes saved across all file systems due to optimization.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceNodeStatusTable 1.3.6.1.4.1.12740.17.1.14
EqualLogic-Dynamic Appliance operations failures table This table is used to retrieve failure information related to an appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceNodeStatusEntry

eqlApplianceNodeStatusEntry 1.3.6.1.4.1.12740.17.1.14.1
An entry (row) containing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceNodeStatusEntry  

eqlApplianceNodeStatusNodeState 1.3.6.1.4.1.12740.17.1.14.1.1
This field represents the state of the node indexed by eqlApplianceNodeIndex
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), on(1), off(2), detached(3)  

eqlApplianceMultiStateOpsTable 1.3.6.1.4.1.12740.17.1.15
EqualLogic-Persistent Appliance Multi-state Operations table. This table is used to maintain state information for a multi-state operation for an appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceMultiStateOpsEntry

eqlApplianceMultiStateOpsEntry 1.3.6.1.4.1.12740.17.1.15.1
An entry (row) containing state information for a mult-state operation for an appliance.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceMultiStateOpsEntry  

eqlApplianceMultiStateOpsIndex 1.3.6.1.4.1.12740.17.1.15.1.1
This field specifies a unique index for identifing a multi-state operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMultiStateOpsRowStatus 1.3.6.1.4.1.12740.17.1.15.1.2
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceMultiStateOpsType 1.3.6.1.4.1.12740.17.1.15.1.3
This field specifies the type of multi-state operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER unknown(0), attach-node(1), add-pair(2), resize(3), detach(4), start(5), stop(6), delete(7), long-running-blocking-config(8), diagnostics(9), nas-cluster-update(10), restore(11), service-mode-change(12), container-cfg-modify(13)  

eqlApplianceMultiStateOpsStatus 1.3.6.1.4.1.12740.17.1.15.1.4
This field represents the current status of this operation. In case of errors, this value will represent the error number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMultiStateOpsServiceTag 1.3.6.1.4.1.12740.17.1.15.1.5
This field indicates the service tag of the attaching node, or the first of the nodes being added
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

eqlApplianceMultiStateOpsServiceTag2 1.3.6.1.4.1.12740.17.1.15.1.6
This field indicates the service tag of the second of the nodes being added
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

eqlApplianceMultiStateOpsNodeIndex 1.3.6.1.4.1.12740.17.1.15.1.7
This field represents the index of a node pertaining to this operation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMultiStateOpsNodeIndex2 1.3.6.1.4.1.12740.17.1.15.1.8
This field represents the index of a second node pertaining to this operation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMultiStateOpsState 1.3.6.1.4.1.12740.17.1.15.1.9
This field represents the state during the attach state machine.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), attach-node-setup(1001), attach-internal-network(1002), attach-san-network(1003), attach-client-network(1004), attach-configure-gateway(1005), attach-start-nodes-validation(1006), attach-nodes-validation-inprogress(1007), attach-action(1008), attach-action-inprogress(1009), attach-completed(1010), resize-expand(1101), resize-expand-inprogress(1102), resize-format(1103), resize-format-inprogress(1104), resize-completed(1105), resize-nas-volumes(1106), resize-discover-volumes(1107), detach-inprogress(1201), start-inprogress(1301), stop-inprogress(1401), add-pair-node-setup(1501), add-pair-node-count(1502), add-pair-cluster-internal-network(1503), add-pair-reset-node-count(1504), add-pair-nodes-internal-network(1505), add-pair-cluster-san-network(1506), add-pair-nodes-san-network(1507), add-pair-cluster-client-network(1508), add-pair-nodes-client-network(1509), add-pair-configure-gateway(1510), add-pair-start-nodes-validation(1511), add-pair-nodes-validation-inprogress(1512), add-pair-prepare(1513), add-pair-create-volume-acls(1514), add-pair-start-attach(1515), add-pair-attach-inprogress(1516), add-pair-start-action(1517), add-pair-action-inprogress(1518), add-pair-completed(1519), add-pair-start-nas-appliance-add(1520), add-pair-nas-appliance-add-inprogress(1521), add-pair-start-volume-discovery(1522), add-pair-start-nas-appliance-join(1523), add-pair-nas-appliance-join-inprogress(1524), delete-inprogress(1601), local-delete-inprogress(1602), modify-internal-network(1701), modify-san-network(1702), modify-client-network(1703), configure-credential-no-external(1704), configure-credential-ldap(1705), configure-credential-nis(1706), configure-credential-unknown(1707), configure-active-directory(1708), max-keep-set(1709), grp-inet-addr-set(1710), delete-container-host-access(1711), rename-cluster(1712), cifs-operation(1713), nas-cluster-update-start(1714), nas-diags-init(1801), nas-diags-start-general(1802), nas-diags-check-general-started(1803), nas-diags-check-general-finished(1804), nas-diags-start-file(1805), nas-diags-check-file-started(1806), nas-diags-check-file-finished(1807), nas-diags-finalize(1808), nas-diags-done(1809), nas-cluster-update-inprogress(1901), restore-start(2001), restore-service-mode-to-maintenance(2002), restore-transitioning-to-maintenance(2003), restore-internal-network(2004), restore-cluster-name(2005), restore-start-nas-appliance-create(2006), restore-nas-appliance-create-in-progress(2007), restore-san-network(2008), restore-send-eql-group-ip(2009), restore-create-volume-acls(2010), restore-start-volume-discovery(2011), restore-start-format(2012), restore-format-in-progress(2013), restore-start-config-restore(2014), restore-config-restore-in-progress(2015), restore-done(2016), service-mode-change-inprogress(2101), container-cfg-modify-inprogress(2200)  

eqlApplianceMultiStateOpsPercentage 1.3.6.1.4.1.12740.17.1.15.1.10
This field represents the % of completion for this operation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

eqlApplianceMultiStateOpsAction 1.3.6.1.4.1.12740.17.1.15.1.11
This field is used to either retry or continue the currently active operation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), retry(1), continue(2), delete(3), start(4)  

eqlApplianceMultiStateOpsCurNodeIndex 1.3.6.1.4.1.12740.17.1.15.1.12
This field represents the index of a node that is being operated on for this operation. 0 means VIP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMultiStateOpsLongRunningOp 1.3.6.1.4.1.12740.17.1.15.1.13
True if a long running nas operation is in progress.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

eqlApplianceMultiStateOpsRequestId 1.3.6.1.4.1.12740.17.1.15.1.14
This field represents the the operation request identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eqlApplianceNdmpTable 1.3.6.1.4.1.12740.17.1.16
EqualLogic-Dynamic Appliance Ndmp Table. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceNdmpEntry

eqlApplianceNdmpEntry 1.3.6.1.4.1.12740.17.1.16.1
An entry (row) containing ndmp information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceNdmpEntry  

eqlApplianceNdmpRowStatus 1.3.6.1.4.1.12740.17.1.16.1.1
Rowstatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceNdmpUserName 1.3.6.1.4.1.12740.17.1.16.1.2
User name to allow DMA Servers to connect to NDMPD. This name must be used for user authentication by NDMPD.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..128)  

eqlApplianceNdmpPasswd 1.3.6.1.4.1.12740.17.1.16.1.3
An octet string containing the password to authenticate DMA servers connecting to NDMPD. If written, it changes the password for the account. If read, it returns a zero-length string.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

eqlApplianceNdmpDesiredState 1.3.6.1.4.1.12740.17.1.16.1.4
This field is used to either stop or start NDMP.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER stop(0), start(1)  

eqlApplianceNdmpClientPort 1.3.6.1.4.1.12740.17.1.16.1.5
The listening port number of the Ndmp. Ndmp will listen on this port on all available client IP addresses.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

eqlApplianceNdmpDmaServerTable 1.3.6.1.4.1.12740.17.1.17
EqualLogic-Dynamic Appliance NDMP DMA Server Table. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceNdmpDmaServerEntry

eqlApplianceNdmpDmaServerEntry 1.3.6.1.4.1.12740.17.1.17.1
An entry (row) containing group ndmp dma server information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceNdmpDmaServerEntry  

eqlApplianceNdmpDmaServerRowStatus 1.3.6.1.4.1.12740.17.1.17.1.1
row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceNdmpDmaServerIPAddressType 1.3.6.1.4.1.12740.17.1.17.1.2
This field contains the IP Address, in network byte order for the NTP server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlApplianceNdmpDmaServerIPAddress 1.3.6.1.4.1.12740.17.1.17.1.3
This field contains the IP Address, in network byte order for the NTP server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlApplianceNdmpDmaServerTransactionState 1.3.6.1.4.1.12740.17.1.17.1.4
This field denotes the transaction state of the operations on the eqlApplianceNdmpDmaServerTable.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER configNone(0), configStart(1), configInProgress(2), configCommit(3), configStartCommit(4)  

eqlApplianceLocalUserAccessTable 1.3.6.1.4.1.12740.17.1.18
EqualLogic-Dynamic Appliance User access table This table is used to manage user accounts on the Appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceLocalUserAccessEntry

eqlApplianceLocalUserAccessEntry 1.3.6.1.4.1.12740.17.1.18.1
An entry (row) containing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceLocalUserAccessEntry  

eqlApplianceLocalUserAccessRowStatus 1.3.6.1.4.1.12740.17.1.18.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceLocalUserName 1.3.6.1.4.1.12740.17.1.18.1.2
The users name
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceLocalUserPassword 1.3.6.1.4.1.12740.17.1.18.1.3
The user password
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..240)  

eqlApplianceLocalUserUid 1.3.6.1.4.1.12740.17.1.18.1.4
The numeric Unix user ID of the user referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceLocalUserPrimaryGroup 1.3.6.1.4.1.12740.17.1.18.1.5
The name of the group that sets the group quota for this user
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceLocalUserRealName 1.3.6.1.4.1.12740.17.1.18.1.6
The real name associated with this user
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

eqlApplianceLocalUserSid 1.3.6.1.4.1.12740.17.1.18.1.7
The SID of this user presented as a hyphen separated alpha numeric string
Status: deprecated Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceLocalUserRemarks 1.3.6.1.4.1.12740.17.1.18.1.8
The administrator remarks associated with this user
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceLocalUserAdditionalGroups 1.3.6.1.4.1.12740.17.1.18.1.9
A comma separated list of the group names used to determine access permissions for this user
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..1023)  

eqlApplianceLocalUserAccess 1.3.6.1.4.1.12740.17.1.18.1.10
This field specifies whether or not access is enabled for the local user in this appliance. The default is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

eqlApplianceLocalGroupAccessTable 1.3.6.1.4.1.12740.17.1.19
EqualLogic-Dynamic Appliance local group access table This table is used to manage local group accounts on the Appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceLocalGroupAccessEntry

eqlApplianceLocalGroupAccessEntry 1.3.6.1.4.1.12740.17.1.19.1
An entry (row) containing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceLocalGroupAccessEntry  

eqlApplianceLocalGroupAccessRowStatus 1.3.6.1.4.1.12740.17.1.19.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceLocalGroupName 1.3.6.1.4.1.12740.17.1.19.1.2
The name of the group referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceLocalGroupGid 1.3.6.1.4.1.12740.17.1.19.1.3
The numeric Unix group ID of the group referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceLocalGroupGsid 1.3.6.1.4.1.12740.17.1.19.1.4
The GSID of this group presented as a hyphen separated alpha numeric string
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceCredentialsDatabaseTable 1.3.6.1.4.1.12740.17.1.20
EqualLogic-Dynamic Appliance credentials access table This table is used to manage the credential databases on the Appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceCredentialsDatabaseEntry

eqlApplianceCredentialsDatabaseEntry 1.3.6.1.4.1.12740.17.1.20.1
An entry (row) containing an operation
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceCredentialsDatabaseEntry  

eqlApplianceCredentialsDatabaseRowStatus 1.3.6.1.4.1.12740.17.1.20.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceCredentialsDatabaseType 1.3.6.1.4.1.12740.17.1.20.1.2
This field represents the type of user data base on the apppliance
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER noexternal(0), ldap(1), nis(2), unknown(3)  

eqlApplianceCredentialsDatabaseLdapBaseDn 1.3.6.1.4.1.12740.17.1.20.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

eqlApplianceCredentialsDatabaseLdapServerAddress 1.3.6.1.4.1.12740.17.1.20.1.4
The IP address as a string
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceCredentialsDatabaseNisDomain 1.3.6.1.4.1.12740.17.1.20.1.5
The NIS Domain
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceCredentialsDatabaseNisServerAddress 1.3.6.1.4.1.12740.17.1.20.1.6
A comma separated list of NIS server IP addresses
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..512)  

eqlApplianceActiveDirectoryAccessTable 1.3.6.1.4.1.12740.17.1.21
EqualLogic-Dynamic Appliance User access table This table is used to manage access to Active Directory by the Appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceActiveDirectoryAccessEntry

eqlApplianceActiveDirectoryAccessEntry 1.3.6.1.4.1.12740.17.1.21.1
An entry (row) containing an operation
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceActiveDirectoryAccessEntry  

eqlApplianceActiveDirectoryRowStatus 1.3.6.1.4.1.12740.17.1.21.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceActiveDirectoryAdvancedSettings 1.3.6.1.4.1.12740.17.1.21.1.2
Yes/No; Allows for advanced configuration by support personel; Leave as No
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), no(1), yes(2)  

eqlApplianceActiveDirectoryNetBiosName 1.3.6.1.4.1.12740.17.1.21.1.3
This is the NetBIOS name that will appear in network neighborhood
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceActiveDirectoryDomain 1.3.6.1.4.1.12740.17.1.21.1.4
The Active Directory full qualified domain name the appliance belongs to
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceActiveDirectoryUserName 1.3.6.1.4.1.12740.17.1.21.1.5
A username with permissions to join the AD
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceActiveDirectoryPassword 1.3.6.1.4.1.12740.17.1.21.1.6
Password for user who can join the AD
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceActiveDirectoryDescription 1.3.6.1.4.1.12740.17.1.21.1.7
Description field
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..1023)  

eqlApplianceActiveDirectoryFunctionalLevel 1.3.6.1.4.1.12740.17.1.21.1.8
Mode of the AD server either Native or Mixed
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..7)  

eqlApplianceActiveDirectoryWinsServer 1.3.6.1.4.1.12740.17.1.21.1.9
IP addr of WINS server if netowrk has one
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceActiveDirectoryWorkGroup 1.3.6.1.4.1.12740.17.1.21.1.10
Name of the workgroup to join
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceActiveDirectoryDomainControllers 1.3.6.1.4.1.12740.17.1.21.1.11
Commma separated list of ipv4 addresses
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

eqlApplianceActiveDirectoryMemberOfDomain 1.3.6.1.4.1.12740.17.1.21.1.12
Truth value if it's member of domain
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..10)  

eqlApplianceActiveDirectoryStatus 1.3.6.1.4.1.12740.17.1.21.1.13
Indicates if the Appliance is able to access the Active Directory domain.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), enabled(1), disabled(2)  

eqlApplianceActiveDirectoryAccessibleControllers 1.3.6.1.4.1.12740.17.1.21.1.14
Commma separated list of controllers that are accessible.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

eqlApplianceActiveDirectoryPreferredControllers 1.3.6.1.4.1.12740.17.1.21.1.15
Comman separated list of preferred Active Directory controllers.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

eqlApplianceManualMappingTable 1.3.6.1.4.1.12740.17.1.22
EqualLogic-Dynamic Appliance User access table This table is used to manage manualmapping of user access to the Appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceManualMappingEntry

eqlApplianceManualMappingEntry 1.3.6.1.4.1.12740.17.1.22.1
An entry (row) containing an operation
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceManualMappingEntry  

eqlApplianceManualMappingRowStatus 1.3.6.1.4.1.12740.17.1.22.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceManualMappingUserName 1.3.6.1.4.1.12740.17.1.22.1.2
The username to be mapped. The increased size is required should an AD name be used
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceManualMappingMappedToUserName 1.3.6.1.4.1.12740.17.1.22.1.3
The username to which the name in eqlApplianceManualMappingUserName is to be mapped. The increased size is required should an AD name be used
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceManualMappingDirection 1.3.6.1.4.1.12740.17.1.22.1.4
The direction of the mapping either none or windows to unix or unix to windows
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), none(1), unixtowindows(2), windowstounix(3)  

eqlApplianceMappingPolicyTable 1.3.6.1.4.1.12740.17.1.23
EqualLogic-Dynamic Appliance User access table This table is used to manage manualmapping of user access to the Appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceMappingPolicyEntry

eqlApplianceMappingPolicyEntry 1.3.6.1.4.1.12740.17.1.23.1
An entry (row) containing an operation
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceMappingPolicyEntry  

eqlApplianceMappingPolicyRowStatus 1.3.6.1.4.1.12740.17.1.23.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceMappingPolicyAcquireMapping 1.3.6.1.4.1.12740.17.1.23.1.2
Indicated if mapping policy is enabled
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), enable(1), disable(2)  

eqlApplianceMappingPolicyAllowNotMapped 1.3.6.1.4.1.12740.17.1.23.1.3
Indicates if guest mapping is allowed for unmapped users. The value is always enabled.
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), enable(1), disable(2)  

eqlApplianceAllGroupsTable 1.3.6.1.4.1.12740.17.1.24
EqualLogic-Dynamic Appliance User access table This table is used to manage non-local group accounts on the Appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceAllGroupsEntry

eqlApplianceAllGroupsEntry 1.3.6.1.4.1.12740.17.1.24.1
An entry (row) containing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceAllGroupsEntry  

eqlApplianceAllGroupsRowStatus 1.3.6.1.4.1.12740.17.1.24.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceAllGroupsName 1.3.6.1.4.1.12740.17.1.24.1.2
The name of the group referenced by this row. The length is to support the maximum length of an AD groupname including the domain
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceAllGroupsId 1.3.6.1.4.1.12740.17.1.24.1.3
The id of the group referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceAllGroupsType 1.3.6.1.4.1.12740.17.1.24.1.4
The type of the group referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), ad(1), unix(2)  

eqlApplianceAllGroupsSource 1.3.6.1.4.1.12740.17.1.24.1.5
The credential source of the group referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), local(1), external(2)  

eqlApplianceAllUsersTable 1.3.6.1.4.1.12740.17.1.25
EqualLogic-Dynamic Appliance User access table This table is used to manage non-local user accounts on the Appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceAllUsersEntry

eqlApplianceAllUsersEntry 1.3.6.1.4.1.12740.17.1.25.1
An entry (row) containing an operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceAllUsersEntry  

eqlApplianceAllUsersRowStatus 1.3.6.1.4.1.12740.17.1.25.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceAllUsersName 1.3.6.1.4.1.12740.17.1.25.1.2
The name of the user referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceAllUsersId 1.3.6.1.4.1.12740.17.1.25.1.3
The id of the user referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceAllUsersType 1.3.6.1.4.1.12740.17.1.25.1.4
The type of the user referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), ad(1), unix(2)  

eqlApplianceAllUsersSource 1.3.6.1.4.1.12740.17.1.25.1.5
The credential source of the user referenced by this row
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), local(1), external(2)  

eqlApplianceEQLMemberMPVTable 1.3.6.1.4.1.12740.17.1.26
EqualLogic-Persistent table used to obtain the Management Protocol Version (MPV) of each EQL Member in the Group. This table is deprecated now. A new table eqlApplianceTypeEQLMemberMPVTable based on groupId, memberIndex and ApplianceType will be instead. TimeoutAll:60
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceEQLMemberMPVEntry

eqlApplianceEQLMemberMPVEntry 1.3.6.1.4.1.12740.17.1.26.1
An entry contains the Management Protocol Version (MPV) of the Member.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  EqlApplianceEQLMemberMPVEntry  

eqlApplianceEQLMemberMPV 1.3.6.1.4.1.12740.17.1.26.1.1
The Management Protocol Version (MPV)of this EQL member.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceMPVTable 1.3.6.1.4.1.12740.17.1.27
EqualLogic-Dynamic table holding the EQL Group MPV and the Appliance Cluster MPV. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceMPVEntry

eqlApplianceMPVEntry 1.3.6.1.4.1.12740.17.1.27.1
An entry contains the Management Protocol Version (MPV) of the EQL Group and of the Appliance Cluster.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceMPVEntry  

eqlApplianceEQLGroupMPV 1.3.6.1.4.1.12740.17.1.27.1.1
The Management Protocol Version (MPV) of the EQL Group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceClusterMPV 1.3.6.1.4.1.12740.17.1.27.1.2
The Management Protocol Version (MPV) of the Appliance Cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceClusterMajorVersion 1.3.6.1.4.1.12740.17.1.27.1.3
The Major firmware version of the Appliance Cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceClusterMinorVersion 1.3.6.1.4.1.12740.17.1.27.1.4
The Minor firmware version of the Appliance Cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceClusterMaintVersion 1.3.6.1.4.1.12740.17.1.27.1.5
The Maintenance firmware version of the Appliance Cluster.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceSyncedDataTable 1.3.6.1.4.1.12740.17.1.28
EqualLogic-Persistent Appliance Unsynced data table This table is used to maintain a list of unsynced data between EQL and the appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceSyncedDataEntry

eqlApplianceSyncedDataEntry 1.3.6.1.4.1.12740.17.1.28.1
An entry (row) containing Synced data.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceSyncedDataEntry  

eqlApplianceSyncedDataRowStatus 1.3.6.1.4.1.12740.17.1.28.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceSyncedDataType 1.3.6.1.4.1.12740.17.1.28.1.2
This field represents the type of the data to be synced to the appliance
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER grpadminpswd(1), grpip(2), timezone(3), traprecipient(4), trapcommunity(5), cluster-san-vip(6)  

eqlApplianceSyncedDataIndex 1.3.6.1.4.1.12740.17.1.28.1.3
This field specifies a unique index for identifing the SyncedData.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceSyncedDataIndexPayload 1.3.6.1.4.1.12740.17.1.28.1.4
This field represents the payload form of the object index that needs to be synced to the appliance
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..1500)  

eqlApplianceSyncedDataEntryPayload 1.3.6.1.4.1.12740.17.1.28.1.5
This field represents the payload form of the object entry that needs to be synced to the appliance
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..1500)  

eqlApplianceSyncedDataState 1.3.6.1.4.1.12740.17.1.28.1.6
This field represents the state of the data to be synced to the appliance
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER sync-pending(0), sync-initiated(1), synced(2)  

eqlApplianceCIFSProtocolTable 1.3.6.1.4.1.12740.17.1.29
Equallogic-Dynamic NAS CIFS Table. This table contains a list of CIFS protocol entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceCIFSProtocolEntry

eqlApplianceCIFSProtocolEntry 1.3.6.1.4.1.12740.17.1.29.1
An entry (row) containing CIFS protocal configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceCIFSProtocolEntry  

eqlApplianceCIFSProtocolRowStatus 1.3.6.1.4.1.12740.17.1.29.1.1
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceCIFSProtocolAuthenticationEnabled 1.3.6.1.4.1.12740.17.1.29.1.2
If true authentication is enabled on this appliance
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

eqlApplianceCIFSProtocolAuthenticationType 1.3.6.1.4.1.12740.17.1.29.1.3
Indicates the type of authentication in effect on the appliance - guestsonly is deprecated
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), activedirectory(1), localuser(2), guestsonly(3)  

eqlApplianceCIFSProtocolAllowGuests 1.3.6.1.4.1.12740.17.1.29.1.4
This is a deprecated field which is still requred in the exastore xml
Status: deprecated Access: read-create
OBJECT-TYPE    
  TruthValue  

eqlApplianceCIFSProtocolMaxConnections 1.3.6.1.4.1.12740.17.1.29.1.5
This field specifies the maxium CIFS connection per node for this appliance
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceCIFSProtocolUnixCharacterSet 1.3.6.1.4.1.12740.17.1.29.1.6
Indicates the Unix character sets supported by CIFS on the appliance
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), utf8(1), utf8jp(2)  

eqlApplianceCIFSProtocolDosCodePage 1.3.6.1.4.1.12740.17.1.29.1.7
Indicates the DOS code page supported by CIFS on the appliance
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), cp850(1), cp437(2), cp737(3), cp775(4), cp852(5), cp857(6), cp860(7), cp861(8), cp862(9), cp863(10), cp864(11), cp865(12), cp866(13), cp874(14), cp932(15), cp936(16), cp949(17), cp950(18), eucjp(19)  

eqlApplianceOptimizationScheduleTable 1.3.6.1.4.1.12740.17.1.30
EqualLogic-Dynamic Appliance Optimization Scheduler Table. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceOptimizationScheduleEntry

eqlApplianceOptimizationScheduleEntry 1.3.6.1.4.1.12740.17.1.30.1
An entry (row) containing ndmp information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceOptimizationScheduleEntry  

eqlApplianceOptimizationScheduleRowStatus 1.3.6.1.4.1.12740.17.1.30.1.1
Rowstatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceOptimizationScheduleStatus 1.3.6.1.4.1.12740.17.1.30.1.2
If true optimization schedule is enabled on this appliance
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

eqlApplianceOptimizationContainerIndex 1.3.6.1.4.1.12740.17.1.30.1.3
Unique Identifier used to manage NAS Containers. 0 in this case.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceOptimizationPolicyIndex 1.3.6.1.4.1.12740.17.1.30.1.4
This value identifies the snapshot policy for this snapshot.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eqlApplianceAdminAccountTable 1.3.6.1.4.1.12740.17.1.31
EqualLogic-Dynamic Appliance Administration account table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceAdminAccountEntry

eqlApplianceAdminAccountEntry 1.3.6.1.4.1.12740.17.1.31.1
An entry (row) containing administration account settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceAdminAccountEntry  

eqlApplianceAdminAccountName 1.3.6.1.4.1.12740.17.1.31.1.1
The name of the administration account.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

eqlApplianceAdminAccountRowStatus 1.3.6.1.4.1.12740.17.1.31.1.2
This value is used to manage the conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceAdminAccountPassword 1.3.6.1.4.1.12740.17.1.31.1.3
An octet string containing the (crypt cipher) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceLicenseTable 1.3.6.1.4.1.12740.17.1.32
EqualLogic-Dynamic Appliance License table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceLicenseEntry

eqlApplianceLicenseEntry 1.3.6.1.4.1.12740.17.1.32.1
An entry (row) containing license settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceLicenseEntry  

eqlApplianceLicenseRowStatus 1.3.6.1.4.1.12740.17.1.32.1.1
This value is used to manage the conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceLicenseFeatureId 1.3.6.1.4.1.12740.17.1.32.1.2
An enumeration defining the licensed feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER basic-dedupe(1), advanced-dedupe(2)  

eqlApplianceLicenseEntitlementId 1.3.6.1.4.1.12740.17.1.32.1.3
Entitlement id of the license.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..80)  

eqlApplianceLicenseState 1.3.6.1.4.1.12740.17.1.32.1.4
License state.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1), expired(2)  

eqlApplianceLicenseExpiry 1.3.6.1.4.1.12740.17.1.32.1.5
Expiration date of the license. This field specifies the expiration date for the license. Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01. 0 for perpetual licenses. If the license type is perpetual this field will be ignored
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eqlApplianceLicenseUsed 1.3.6.1.4.1.12740.17.1.32.1.6
Set to True if the license is in use
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eqlApplianceLicenseType 1.3.6.1.4.1.12740.17.1.32.1.7
License type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER evaluation(0), perpetual(1)  

eqlApplianceLicenseFileTable 1.3.6.1.4.1.12740.17.1.33
EqualLogic-Dynamic Appliance License File table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceLicenseFileEntry

eqlApplianceLicenseFileEntry 1.3.6.1.4.1.12740.17.1.33.1
An entry (row) containing license settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceLicenseFileEntry  

eqlApplianceLicenseFileRowStatus 1.3.6.1.4.1.12740.17.1.33.1.1
This value is used to manage the conceptual row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceLicenseFileName 1.3.6.1.4.1.12740.17.1.33.1.2
File name of the license.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

eqlApplianceTypeEQLMemberMPVTable 1.3.6.1.4.1.12740.17.1.34
EqualLogic-Persistent table used to obtain the Management Protocol Version (MPV) of each EQL Member in the Group for a particular appliance type. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceTypeEQLMemberMPVEntry

eqlApplianceTypeEQLMemberMPVEntry 1.3.6.1.4.1.12740.17.1.34.1
An entry contains the Management Protocol Version (MPV) of the Member.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceTypeEQLMemberMPVEntry  

eqlApplianceTypeEQLMemberMPV 1.3.6.1.4.1.12740.17.1.34.1.1
The Management Protocol Version (MPV) of this EQL member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceTypeEQLGroupMPVTable 1.3.6.1.4.1.12740.17.1.35
EqualLogic-Dynamic table holding the EQL Group MPV for a give type of Appliance Cluster. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceTypeEQLGroupMPVEntry

eqlApplianceTypeEQLGroupMPVEntry 1.3.6.1.4.1.12740.17.1.35.1
An entry contains the Management Protocol Version (MPV) of the EQL Group for a given type of Appliance Cluster.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceTypeEQLGroupMPVEntry  

eqlApplianceTypeEQLGroupMPV 1.3.6.1.4.1.12740.17.1.35.1.1
The Management Protocol Version (MPV) of the EQL Group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceVolumeDiscoveryTable 1.3.6.1.4.1.12740.17.1.36
EqualLogic-Dynamic Appliance volume discovery operation status table This table is used to manage volume discovery operations on appliances. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceVolumeDiscoveryEntry

eqlApplianceVolumeDiscoveryEntry 1.3.6.1.4.1.12740.17.1.36.1
An entry (row) containing volume discovery status.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceVolumeDiscoveryEntry  

eqlApplianceVolumeDiscoveryRowStatus 1.3.6.1.4.1.12740.17.1.36.1.1
This field is used to manage volume discovery operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceVolumeDiscoveryVolumeNodeAccessibleStatus 1.3.6.1.4.1.12740.17.1.36.1.2
This field specifies the Volume accessible status by the specified Appliance and Controller.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-optimal(0), optimal(1), fault(2)  

eqlApplianceVolumeDiscoveryVolumeStatus 1.3.6.1.4.1.12740.17.1.36.1.3
This field specifies the volume status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), expanding(1), formatted(2), expandable(3), new(4), formatting(5)  

eqlApplianceVolumeDiscoveryVolumeLunNumber 1.3.6.1.4.1.12740.17.1.36.1.4
This field specifies the volume LUN number.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

eqlApplianceInitiatorsTable 1.3.6.1.4.1.12740.17.1.37
EqualLogic-Dynamic table holding the list of Initiators for a given NAS Cluster. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceInitiatorsEntry

eqlApplianceInitiatorsEntry 1.3.6.1.4.1.12740.17.1.37.1
An entry (row) containing the initiators information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceInitiatorsEntry  

eqlApplianceInitiatorRowStatus 1.3.6.1.4.1.12740.17.1.37.1.1
This field is used indicate the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceInitiatorName 1.3.6.1.4.1.12740.17.1.37.1.2
The iSCSI initiator name for a particular NAS controller.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..223)  

eqlApplianceUserQueryTable 1.3.6.1.4.1.12740.17.1.38
Equallogic-Dynamic Appliance User search Table. This table provides the ability to search for a particular user in any of the 3 DBs provided, LocalUser, AD User, NIS/LDAP User. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceUserQueryEntry

eqlApplianceUserQueryEntry 1.3.6.1.4.1.12740.17.1.38.1
An entry (row) containing the Appliance User search information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceUserQueryEntry  

eqlApplianceUserQuerySearchString 1.3.6.1.4.1.12740.17.1.38.1.1
The search string used for the query.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceUserQueryDBType 1.3.6.1.4.1.12740.17.1.38.1.2
This field indicates on which database to perform the query.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), ad(1), unix(2), all(3), local(4)  

eqlApplianceUserQueryPageSize 1.3.6.1.4.1.12740.17.1.38.1.3
This field indicates the page size for the query result.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceUserQueryPageNumber 1.3.6.1.4.1.12740.17.1.38.1.4
This field indicates the page number for the query.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceUserQueryUserDomain 1.3.6.1.4.1.12740.17.1.38.1.5
The domain name of the user referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

eqlApplianceUserQueryUserName 1.3.6.1.4.1.12740.17.1.38.1.6
The name of the user referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceUserQueryRowStatus 1.3.6.1.4.1.12740.17.1.38.1.7
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceUserQueryTotalUsers 1.3.6.1.4.1.12740.17.1.38.1.8
This field indicates the total number of users returned by the query.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceUserQueryUserId 1.3.6.1.4.1.12740.17.1.38.1.9
The ID of the user referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceUserQueryUserPrimaryGroup 1.3.6.1.4.1.12740.17.1.38.1.10
The domain name of the user referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..184)  

eqlApplianceUserQueryUserType 1.3.6.1.4.1.12740.17.1.38.1.11
The type of the user referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), ad(1), unix(2)  

eqlApplianceUserQueryUserSource 1.3.6.1.4.1.12740.17.1.38.1.12
The credential source of the user referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), local(1), external(2)  

eqlApplianceDnsServerTable 1.3.6.1.4.1.12740.17.1.39
EqualLogic-Dynamic table used to store DNS servers for a NAS appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceDnsServerEntry

eqlApplianceDnsServerEntry 1.3.6.1.4.1.12740.17.1.39.1
An entry contains the antivirus host information for a NAS appliance.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceDnsServerEntry  

eqlApplianceDnsServerIndex 1.3.6.1.4.1.12740.17.1.39.1.1
This field specifies an index that uniquely identifies the DNS server entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceDnsServerRowStatus 1.3.6.1.4.1.12740.17.1.39.1.2
This field is used to manage the conceptual row entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceDnsServerInetAddressType 1.3.6.1.4.1.12740.17.1.39.1.3
This field contains the IP address type for the DNS server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

eqlApplianceDnsServerInetAddress 1.3.6.1.4.1.12740.17.1.39.1.4
This field contains the IP address, in network byte order, for the DNS server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

eqlApplianceDnsServerTransactionState 1.3.6.1.4.1.12740.17.1.39.1.5
This field denotes the transaction state of the operations on the eqlApplianceDnsServerTable. To accumulate multiple create/destroy op into a single transaction, the TransactionState in the first row should be configStart and the TransactionState of the last row should be configCommit and middle rows should be configInProgress. configStartCommit would indicate a single row in the transaction. singleOp is the same as configStartCommit but comes from an SNMP manager that didn't use TransactionState
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER singleOp(0), configStart(1), configInProgress(2), configCommit(3), configStartCommit(4)  

eqlApplianceDnsSuffixTable 1.3.6.1.4.1.12740.17.1.40
EqualLogic-Dynamic table used to store DNS suffixes for a NAS appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceDnsSuffixEntry

eqlApplianceDnsSuffixEntry 1.3.6.1.4.1.12740.17.1.40.1
An entry contains the antivirus host information for a NAS appliance.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceDnsSuffixEntry  

eqlApplianceDnsSuffixIndex 1.3.6.1.4.1.12740.17.1.40.1.1
This field specifies an index that uniquely identifies the DNS suffix entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

eqlApplianceDnsSuffixRowStatus 1.3.6.1.4.1.12740.17.1.40.1.2
This field is used to manage the conceptual row entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceDnsSuffixString 1.3.6.1.4.1.12740.17.1.40.1.3
This field contains a domain suffix for DNS lookup.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..127)  

eqlApplianceDnsSuffixTransactionState 1.3.6.1.4.1.12740.17.1.40.1.4
This field denotes the transaction state of the operations on the eqlApplianceDnsSuffixTable. To accumulate multiple create/destroy op into a single transaction, the TransactionState in the first row should be configStart and the TransactionState of the last row should be configCommit and middle rows should be configInProgress. configStartCommit would indicate a single row in the transaction. singleOp is the same as configStartCommit but comes from an SNMP manager that didn't use TransactionState
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER singleOp(0), configStart(1), configInProgress(2), configCommit(3), configStartCommit(4)  

eqlApplianceDomainListTable 1.3.6.1.4.1.12740.17.1.41
Equallogic-Dynamic Appliance Domain list Table. This table provides the ability to list all of the Domains for a particular Appliance. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceDomainListEntry

eqlApplianceDomainListEntry 1.3.6.1.4.1.12740.17.1.41.1
An entry (row) containing the domain information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceDomainListEntry  

eqlApplianceDomainName 1.3.6.1.4.1.12740.17.1.41.1.1
This field indicates the domain name.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceDomainType 1.3.6.1.4.1.12740.17.1.41.1.2
this field indicates the domain type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), ad(1), unix(2), local(3)  

eqlApplianceGroupQueryTable 1.3.6.1.4.1.12740.17.1.42
Equallogic-Dynamic Appliance User search Table. This table provides the ability to search for a particular user in any of the 3 DBs provided, LocalUser, AD User, NIS/LDAP User. TimeoutAll:60
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EqlApplianceGroupQueryEntry

eqlApplianceGroupQueryEntry 1.3.6.1.4.1.12740.17.1.42.1
An entry (row) containing the Appliance User search information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EqlApplianceGroupQueryEntry  

eqlApplianceGroupQuerySearchString 1.3.6.1.4.1.12740.17.1.42.1.1
The search string used for the query.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceGroupQueryDBType 1.3.6.1.4.1.12740.17.1.42.1.2
This field indicates on which database to perform the query.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), ad(1), unix(2), all(3), local(4)  

eqlApplianceGroupQueryPageSize 1.3.6.1.4.1.12740.17.1.42.1.3
This field indicates the page size for the query result.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceGroupQueryPageNumber 1.3.6.1.4.1.12740.17.1.42.1.4
This field indicates the page number for the query.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceGroupQueryDomain 1.3.6.1.4.1.12740.17.1.42.1.5
The domain name of the group referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

eqlApplianceGroupQueryGroupName 1.3.6.1.4.1.12740.17.1.42.1.6
The name of the group referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..129)  

eqlApplianceGroupQueryRowStatus 1.3.6.1.4.1.12740.17.1.42.1.7
This field is used to manage operations.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eqlApplianceGroupQueryTotalGroups 1.3.6.1.4.1.12740.17.1.42.1.8
This field indicates the total number of groups returned by the query.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

eqlApplianceGroupQueryGroupId 1.3.6.1.4.1.12740.17.1.42.1.9
The ID of the group referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

eqlApplianceGroupQueryGroupType 1.3.6.1.4.1.12740.17.1.42.1.10
The type of the group referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), ad(1), unix(2)  

eqlApplianceGroupQueryGroupSource 1.3.6.1.4.1.12740.17.1.42.1.11
The credential source of the group referenced by this row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unused(0), local(1), external(2)