ENTERASYS-PWA-MIB

File: ENTERASYS-PWA-MIB.mib (45573 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMP-FRAMEWORK-MIB RMON2-MIB IF-MIB
P-BRIDGE-MIB INET-ADDRESS-MIB ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Counter64 Integer32 IpAddress
TruthValue TimeStamp TimeInterval
MacAddress DisplayString MODULE-COMPLIANCE
OBJECT-GROUP SnmpAdminString ZeroBasedCounter32
InterfaceIndex EnabledStatus InetAddressType
InetAddress etsysModules

Defined Types

EtsysPwaPortConfigurationEntry  
SEQUENCE    
  etsysPwaPortNumber InterfaceIndex
  etsysPwaInitializePort TruthValue
  etsysPwaAuthQuietPeriod Integer32
  etsysPwaAuthMaxReq Integer32
  etsysPwaControlledPortControl INTEGER

EtsysPwaAuthStatusEntry  
SEQUENCE    
  etsysPwaAuthPwaState INTEGER
  etsysPwaMaxFailedAttempts ZeroBasedCounter32
  etsysPwaFailedAttemptsSinceLogon ZeroBasedCounter32
  etsysPwaLastLogonResult SnmpAdminString

EtsysPwaAuthSessionStatsEntry  
SEQUENCE    
  etsysPwaAuthSessionID Integer32
  etsysPwaAuthSessionOctetsRx Counter32
  etsysPwaAuthSessionOctetsRxOverflow Counter32
  etsysPwaAuthSessionOctetsTx Counter32
  etsysPwaAuthSessionOctetsTxOverflow Counter32
  etsysPwaAuthSessionFramesRx Counter32
  etsysPwaAuthSessionFramesTx Counter32
  etsysPwaAuthSessionStartTime TimeStamp
  etsysPwaAuthSessionDuration TimeInterval
  etsysPwaAuthSessionTerminateCause INTEGER
  etsysPwaAuthSessionMacAddress MacAddress
  etsysPwaAuthSessionIPAddressType InetAddressType
  etsysPwaAuthSessionIPAddress InetAddress
  etsysPwaAuthSessionUserName SnmpAdminString

EtsysPwaAuthSessionStatsHCEntry  
SEQUENCE    
  etsysPwaAuthSessionHCID Integer32
  etsysPwaAuthSessionOctetsRxHc Counter64
  etsysPwaAuthSessionOctetsTxHc Counter64

Defined Values

etsysPwaMIB 1.3.6.1.4.1.5624.1.2.8
This MIB module provides the ability to configure the Port Web Authentication (PWA) component in a switch. PWA provides a way of authenticating a user on a switch port before allowing the user general access to the network. Only the essential protocols and services required by the authentication process are allowed on the segment between the end-station and the switch port. All other traffic will be discarded. When a user is in the unauthenticated state, any traffic generated by the end-station will not go beyond the switch port that they are connected to. The PWA/login process from the user standpoint is simple. The user makes a request via their favorite web browser for the 'secureharbour' web page. Depending upon the authenticated state of the port, a login page is provided so that the user can enter their username and password, or a logout page is presented to the user. When they submit their login page, the switch will then authenticate them via a preconfigured radius server. If the login is successful, then the port that the end-station is connected to will be turned on and full network access will be granted according to the users port configuration on the switch. This MIB module also provides status about the PWA component and statistics about all current users who are logged into the switch.
MODULE-IDENTITY    

etsysPwaSystem 1.3.6.1.4.1.5624.1.2.8.1
OBJECT IDENTIFIER    

etsysPwaPortConfiguration 1.3.6.1.4.1.5624.1.2.8.2
OBJECT IDENTIFIER    

etsysPwaPortStatus 1.3.6.1.4.1.5624.1.2.8.3
OBJECT IDENTIFIER    

etsysPwaSession 1.3.6.1.4.1.5624.1.2.8.4
OBJECT IDENTIFIER    

etsysPwaSystemAuthControl 1.3.6.1.4.1.5624.1.2.8.1.1
The administrative enable/disable state for Port Web Authentication Control in a System. Enabling this object turns on the PWA system.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

etsysPwaSystemAuthHostName 1.3.6.1.4.1.5624.1.2.8.1.2
This is the hostname part the Uniform Resource Locator (URL). This object is a DNS/WINS name and is considered to be bound to the etsysPwaSystemAuthIPAddress. This object must not contain the protocol portion of the URL nor any directory or filenames. Changing this objects value changes the default name of the http server located at the local switch. An administrator can change this objects value to whatever name is appropriate for their network.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

etsysPwaSystemAuthBanner 1.3.6.1.4.1.5624.1.2.8.1.3
The banner that will be displayed on the web login page of the Port Web Authentication Control in a System. This banner is a courtesy introduction to the network, which the user sees on the login page.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

etsysPwaSystemPwaNameServicesEnable 1.3.6.1.4.1.5624.1.2.8.1.4
The enable state of the name services application. Enabling this object turns on the Domain Name Service (DNS) and the Windows Internet Naming Services (WINS) clients. These clients will resolve only requests for the etsysPwaSystemAuthHostName. Disabling this object would require users in the network to know and use the etsysPwaSystemAuthIPAddress of this system.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

etsysPwaSystemAuthIPAddressType 1.3.6.1.4.1.5624.1.2.8.1.5
This object has been deprecated. Refer to etsysPwaSystemAuthIPAddress for the reason. The textual convention for InetAddressType states that this object must be registered immediately before the InetAddress that it defines. etsysPwaSystemAuthInetAddressType MUST be used for all future implementations of this MIB.
Status: deprecated Access: read-write
OBJECT-TYPE    
  InetAddressType  

etsysPwaSystemAuthIPAddress 1.3.6.1.4.1.5624.1.2.8.1.6
This object has been deprecated due to an incorrect initial implementation of this MIB. This object was originally an InetAddress but some versions of the E7 firmware implemented it as an IpAddress. The syntax of this object was changed to allow management of the existing products. The etsysPwaSystemAuthInetAddress object MUST be used for all future implementations of this MIB.
Status: deprecated Access: read-write
OBJECT-TYPE    
  IpAddress  

etsysPwaSystemAuthProtocol 1.3.6.1.4.1.5624.1.2.8.1.7
The authentication protocol used for this switch module. When set to a chap(1), the authentication scheme used will be the 'PPP Challenge Handshake Authentication Protocol (CHAP)', when set to a pap(2), the scheme will be 'Password Authentication Protocol (PAP)'. When using the CHAP protocol, the username and password utilize the CHAP protocol method of encryption to encrypt the users password in the http transmission of the submitted form on the segment between the end-station and the switch port. The PAP protocol is less secure than CHAP and does not provide any encryption on the segment between the end-station the switch port. The username and password go over this segment in the http transmission of the submitted form in plain text format.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER chap(1), pap(2)  

etsysPwaSystemAuthDomain 1.3.6.1.4.1.5624.1.2.8.1.8
The domain name for which this module resides in.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

etsysPwaSystemAuthInetAddressType 1.3.6.1.4.1.5624.1.2.8.1.9
A value that represents a type of etsysPwaSystemAuthInetAddress. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address which is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

etsysPwaSystemAuthInetAddress 1.3.6.1.4.1.5624.1.2.8.1.10
The IP address bound to the etsysPwaSystemAuthHostName. The format of this object is defined in the etsysPwaSystemAuthInetAddressType object. This address MUST be supplied for authentication to work. This is a globally unique address and must be the same value configured into every authenticating switch in the domain. Each switch terminates any IP traffic destined to this etsysPwaSystemAuthInetAddress. If the port is in either promiscousAuto(4) or auto(2) mode, described in the etsysPwaControlledPortControl object, then the local switch in question responds to http requests with a login page. If the port is in any other mode, then all traffic destined for etsysPwaSystemAuthInetAddress is discarded. Please note that neither the etsysPwaSystemAuthHostName object nor this object refer to any specific machine in the network. These objects are always relative to the connection between an end station and a switch. Traffic destined for this IP is never seen over interswitch links.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

etsysPwaSystemAuthEnhancedMode 1.3.6.1.4.1.5624.1.2.8.1.11
The enable state of the PWA enhanced mode. When this feature is enabled users on unauthenticated ports will be presented the login page on their initial web access. The etsysPwaControlledPortControl object MUST be set to auto(2) for this feature to function correctly. If etsysPwaControlledPortControl is not set to auto(2), or if this feature is disabled, users must enter the value of etsysPwaSystemAuthHostName in order to get the login page.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

etsysPwaLogoDisplayStatus 1.3.6.1.4.1.5624.1.2.8.1.12
When this object is set to enabled, the secureharbour logo will be displayed on the PWA login web pages. When it is set to disabled, the logo will not be displayed.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

etsysPwaSystemGuestUsername 1.3.6.1.4.1.5624.1.2.8.1.13
The username that the Guest Networking feature will use to authenticate users that do not override this value in the login page.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

etsysPwaSystemGuestPassword 1.3.6.1.4.1.5624.1.2.8.1.14
The password that the Guest Networking feature will use to authenticate users that do not override the guest username. On a read this object will always return an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

etsysPwaSystemGuestPasswordValid 1.3.6.1.4.1.5624.1.2.8.1.15
true(1) - indicates that etsysPwaGuestPassword was last set with some value other than the empty string. false(2) - indicates that etsysPwaGuestPassword has never been set, or was last set to the empty string.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

etsysPwaSystemGuestNetworkingStatus 1.3.6.1.4.1.5624.1.2.8.1.16
Guest Networking is a feature that allows a user to get default policy access to the network without having to know a username or password. When this feature is not disabled(1), the username on the login page will be populated with the value from the object etsysPwaGuestUsername and the password will be mask out with asterisks. The password in the login page should never be populated with the value from etsysPwaGuestPassword. When Guest Networking is enabled, and a user submits a request for authentication, and the username is the same as the value from etsysPwaGuestUsername, PWA will use the value from etsysPwaGuestPassword as the password for authentication. When this object is set to disabled(1), Guest Networking will be unavailable. When set to authNone(2) Guest Networking will be enabled and it will not authenticate the guest user using any authentication method. Once the user submits the login page with the username that matches the value from etsysPwaGuestUsername, the default policy of that port will become the active policy. When set to authRadius(3) Guest Networking will be enabled and it will authenticate the guest user using RADIUS authentication Upon a successful authentication from RADIUS, this port will apply the policy returned from RADIUS to that port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), authNone(2), authRadius(3)  

etsysPwaSystemEnhancedModeRefreshTime 1.3.6.1.4.1.5624.1.2.8.1.17
This is the value that is displayed on the PWA login success page as the redirect time. If a user, using PWA enhanced mode, enters a URL of 'http://enterasys.com' prior to being presented with the PWA login page and then successfully authenticates into the network they would be presented with a login success page that displays 'Welcome to the Network. Completing network connections. You will be redirected to http://enterasys.com in approximately 30 seconds'. An end-station that is utilizing the Dynamic Host Configuration Protocol (DHCP) as a means of obtaining an IP address will take some time to transition from the temporary IP address issued by PWA, as part of the authentication process, to the official IP address issued by the network. etsysPwaSystemEnhancedModeRefreshTime provides a configurable time period for the end-stations on a given switch to complete the process of obtaining their official IP addresses and to begin using them. The default value of 30 seconds has been shown to be adequate in most environments. In some networks this time period may need to be longer, and in other networks it could be shorter. In networks that only use static IP addresses a time period on the order of 5 to 10 seconds may be sufficient. A period of less than 5 seconds is not recommended as there is a slight delay after a successful login before the switch transitions the port to forwarding.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..120  

etsysPwaPortConfigurationTable 1.3.6.1.4.1.5624.1.2.8.2.1
A table of configuration objects for each port that are supported by the Port Web Authentication Entity. An entry appears in this table for each port in this system. All objects/instances in this table are stored persistent memory.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPwaPortConfigurationEntry

etsysPwaPortConfigurationEntry 1.3.6.1.4.1.5624.1.2.8.2.1.1
The ifIndex number, maximum number of requests, quiet period between failed attempts, and initialization control for a Port. This table holds the objects for configuring the PWA system.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPwaPortConfigurationEntry  

etsysPwaPortNumber 1.3.6.1.4.1.5624.1.2.8.2.1.1.1
The ifIndex number associated with this port.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

etsysPwaInitializePort 1.3.6.1.4.1.5624.1.2.8.2.1.1.2
The initialization control for this ifIndex. This object can be used to unauthenticate a user on a port or to return the port to its initial default state due to some unknown condition. Setting this attribute to true(1) causes the Port to be initialized. The attribute value reverts to false(2) once initialization has completed. Initializing a port returns the etsysPwaAuthPwaState to disconnected(1) and if the etsysPwaControlledPortControl setting is either promiscousAuto(4) or auto(2), and the etsysPwaAuthPwaState was authenticated(3), then the current session is terminated, and the user is forced off the network.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

etsysPwaAuthQuietPeriod 1.3.6.1.4.1.5624.1.2.8.2.1.1.3
The value, in seconds, of the quietPeriod constant currently in use by the Port Web Authenticator state machine. After the user attempts unsuccessfully to login a number of times equal to the etsysPwaAuthMaxReq constant, then the ifIndex is locked for a time period equal to the value of this MIB entry. In the initial released version of this MIB this object was an Unsigned32. The initial implementation on the E7 returned an Integer32. The syntax of this object was changed to reflect the existing product in the field. All future implementations of this object should return an Integer32.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

etsysPwaAuthMaxReq 1.3.6.1.4.1.5624.1.2.8.2.1.1.4
The value of the maxReq constant currently in use by the Port Web Authenticator state machine. This represents the maximum number of failed retry attempts before preventing any further attempts for a time period equal to the value of etsysPwaAuthQuietPeriod. In the initial released version of this MIB this object was an Unsigned32. The initial implementation on the E7 returned an Integer32. The syntax of this object was changed to reflect the existing product in the field. All future implementations of this object should return an Integer32.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

etsysPwaControlledPortControl 1.3.6.1.4.1.5624.1.2.8.2.1.1.5
The authentication method of the ifIndex. A value of forceUnauthorized(1) indicates that the port is always unauthenticated. When set to this value the ifindex is essentially disabled. A value of auto(2) indicates that the ifindex will authenticate users using PWA process. In this mode the switch will provide all the services the end-station will need to complete the login. These services include a Dynamic Host Configuration Protocol (DHCP) server, a Windows Internet Naming Server (WINS), and a Domain Name Service (DNS) Server. A value of forceAuthorized(3) indicates the port is always authorized. When set to this value, the ifindex will always be authenticated. When set to promiscousAuto(4) the services that are required to complete the network login are not provided by the switch. These services must be provided on a back-end network that the end-station can communicate with. These services might be specific to the particular Operating System of the end-station and could also include the same services as provided in auto mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forceUnauthorized(1), auto(2), forceAuthorized(3), promiscousAuto(4)  

etsysPwaAuthStatusTable 1.3.6.1.4.1.5624.1.2.8.3.1
A table that contains the status objects for the Port Web Authenticator associated with each ifIndex. An entry appears in this table for each ifIndex that may authenticate access to itself. All objects/instances in this table are stored in persistent memory.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPwaAuthStatusEntry

etsysPwaAuthStatusEntry 1.3.6.1.4.1.5624.1.2.8.3.1.1
The status information for an Authenticator PWA.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPwaAuthStatusEntry  

etsysPwaAuthPwaState 1.3.6.1.4.1.5624.1.2.8.3.1.1.1
The current value of the Port Web Authenticator state machine. When set to disconnected(1) no user is logged in. When set to authenticating(2), it indicates that a login is in process and has not yet completed. A value of authenticated(3) indicates a user has successfully logged in. When the value is held(4) it indicates that the port is locked down because the number of failed login attempts is greater than etsysPwaAuthMaxReq.The port will be locked until the etsysPwaAuthQuietPeriod has expired.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disconnected(1), authenticating(2), authenticated(3), held(4)  

etsysPwaMaxFailedAttempts 1.3.6.1.4.1.5624.1.2.8.3.1.1.2
The total number of failed logon attempts on this ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  ZeroBasedCounter32  

etsysPwaFailedAttemptsSinceLogon 1.3.6.1.4.1.5624.1.2.8.3.1.1.3
The total number of failed logon attempts since the last successful logon on this ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  ZeroBasedCounter32  

etsysPwaLastLogonResult 1.3.6.1.4.1.5624.1.2.8.3.1.1.4
This ASCII string provides an unstructured way for the web based auth agent to communicate detailed error and status indications to a network administrator.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

etsysPwaAuthSessionStatsTable 1.3.6.1.4.1.5624.1.2.8.4.1
A table that contains the session statistics objects for the Authenticator PWA associated with each ifIndex. An entry appears in this table for each ifIndex that may authenticate access to itself. Session entries are collected for each ifIndex. All objects/instances in this table are stored in non-persistent memory. The instancing in this table and the etsysPwaAuthSessionStatsHCTable are dependent upon the switch port configuration and will always be identical in any given switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPwaAuthSessionStatsEntry

etsysPwaAuthSessionStatsEntry 1.3.6.1.4.1.5624.1.2.8.4.1.1
The session statistics information for an Authenticator PWA. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each ifIndex where there is no session currently active.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPwaAuthSessionStatsEntry  

etsysPwaAuthSessionID 1.3.6.1.4.1.5624.1.2.8.4.1.1.1
A unique ID that identifies the session on this ifindex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

etsysPwaAuthSessionOctetsRx 1.3.6.1.4.1.5624.1.2.8.4.1.1.2
The number of octets received in user data frames on this ifIndex during the session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPwaAuthSessionOctetsRxOverflow 1.3.6.1.4.1.5624.1.2.8.4.1.1.3
The number of times the associated etsysPwaAuthSessionOctetsRx counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPwaAuthSessionOctetsTx 1.3.6.1.4.1.5624.1.2.8.4.1.1.4
The number of octets transmitted in user data frames on this ifIndex during the session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPwaAuthSessionOctetsTxOverflow 1.3.6.1.4.1.5624.1.2.8.4.1.1.5
The number of times the associated etsysPwaAuthSessionOctetsTx counter has overflowed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPwaAuthSessionFramesRx 1.3.6.1.4.1.5624.1.2.8.4.1.1.6
The number of user data frames received on this ifIndex during the session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPwaAuthSessionFramesTx 1.3.6.1.4.1.5624.1.2.8.4.1.1.7
The number of user data frames transmitted on this ifIndex during the session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

etsysPwaAuthSessionStartTime 1.3.6.1.4.1.5624.1.2.8.4.1.1.8
The start time of the session in hundredths of seconds since reset.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

etsysPwaAuthSessionDuration 1.3.6.1.4.1.5624.1.2.8.4.1.1.9
The duration of the session in hundredths of seconds.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

etsysPwaAuthSessionTerminateCause 1.3.6.1.4.1.5624.1.2.8.4.1.1.10
The reason for the session termination. When set to linkDown(1), the ifindex has no link. When set to logoff(2), a user has successfully logged off the network on this ifindex. When set to authControlForceUnauth(3) an administrator has terminated the user session on this ifindex by setting etsysPwaControlledPortControl to forceUnauthorized(1). When set to portReInit(4) the ifindex has been re-initialized by setting the object etsysPwaInitializePort. When set to portDisabled(5) the ifindex has been disabled. When set notTerminatedYet(999) the ifindex has an active session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER linkDown(1), logoff(2), authControlForceUnauth(3), portReInit(4), portDisabled(5), notTerminatedYet(999)  

etsysPwaAuthSessionMacAddress 1.3.6.1.4.1.5624.1.2.8.4.1.1.11
The mac address of the remote user of this session entry stored for this ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

etsysPwaAuthSessionIPAddressType 1.3.6.1.4.1.5624.1.2.8.4.1.1.12
A value that represents a type of etsysPwaAuthSessionIPAddress. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address which is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

etsysPwaAuthSessionIPAddress 1.3.6.1.4.1.5624.1.2.8.4.1.1.13
The ip address of the remote user of this session entry stored for this ifIndex. The format of this object is defined in the etsysPwaAuthSessionIPAddressType object.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

etsysPwaAuthSessionUserName 1.3.6.1.4.1.5624.1.2.8.4.1.1.14
The username that logged on to this ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

etsysPwaAuthSessionStatsHCTable 1.3.6.1.4.1.5624.1.2.8.4.2
A table that contains the session statistics objects for the Authenticator PWA associated with each ifIndex. An entry appears in this table for each ifIndex that may authenticate access to itself. Session entries are collected for each ifIndex up to the maximum allowed. When the maximum number of allowed sessions has been reached, the oldest session entries will be replaced with newer ones as necessary. All objects/instances in this table are stored in non-persistent memory.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysPwaAuthSessionStatsHCEntry

etsysPwaAuthSessionStatsHCEntry 1.3.6.1.4.1.5624.1.2.8.4.2.1
The session statistics information for an Authenticator PWA. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each ifIndex where there is no session currently active.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysPwaAuthSessionStatsHCEntry  

etsysPwaAuthSessionHCID 1.3.6.1.4.1.5624.1.2.8.4.2.1.1
A unique ID that identifies the session on this ifindex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

etsysPwaAuthSessionOctetsRxHc 1.3.6.1.4.1.5624.1.2.8.4.2.1.2
The number of octets received in user data frames on this ifIndex during the session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

etsysPwaAuthSessionOctetsTxHc 1.3.6.1.4.1.5624.1.2.8.4.2.1.3
The number of octets transmitted in user data frames on this ifIndex during the session.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

etsysPwaMIBGroups 1.3.6.1.4.1.5624.1.2.8.5
OBJECT IDENTIFIER    

etsysPwaMIBCompliances 1.3.6.1.4.1.5624.1.2.8.6
OBJECT IDENTIFIER    

etsysPwaSystemGroup 1.3.6.1.4.1.5624.1.2.8.5.1
This section has been deprecated. See etsysPwaSystemGroupI.
Status: deprecated Access: read-only
OBJECT-GROUP    

etsysPwaPortConfigurationGroup 1.3.6.1.4.1.5624.1.2.8.5.2
This section is for ifIndex based configuration of the PWA system.
Status: current Access: read-only
OBJECT-GROUP    

etsysPwaPortStatusGroup 1.3.6.1.4.1.5624.1.2.8.5.3
The status of all login information on a per ifIndex basis can be obtained here.
Status: current Access: read-only
OBJECT-GROUP    

etsysPwaSessionGroup 1.3.6.1.4.1.5624.1.2.8.5.4
This section contains statistics associated with each ifIndex/login.
Status: current Access: read-only
OBJECT-GROUP    

etsysPwaSessionHCGroup 1.3.6.1.4.1.5624.1.2.8.5.5
This section contains statistics associated with each ifIndex/login.
Status: current Access: read-only
OBJECT-GROUP    

etsysPwaSystemGroupI 1.3.6.1.4.1.5624.1.2.8.5.6
This section is for the basic configuration parameters used by the PWA system.
Status: current Access: read-only
OBJECT-GROUP    

etsysPwaSystemAuthEnhancedGroup 1.3.6.1.4.1.5624.1.2.8.5.7
This section is for the configuration of the PWA enhanced mode of operation.
Status: current Access: read-only
OBJECT-GROUP    

etsysPwaMIBCompliance 1.3.6.1.4.1.5624.1.2.8.6.1
Deprecated, see etsysPwaMIBComplianceI.
Status: deprecated Access: read-only
MODULE-COMPLIANCE    

etsysPwaMIBComplianceI 1.3.6.1.4.1.5624.1.2.8.6.2
The compliance statement for hosts using Port Web Authentication.
Status: current Access: read-only
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor