ENTERASYS-NAT-MIB

File: ENTERASYS-NAT-MIB.mib (67148 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
INET-ADDRESS-MIB	IF-MIB	ENTERASYS-MIB-NAMES
SNMP-FRAMEWORK-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
Gauge32	Counter32	Integer32
MODULE-COMPLIANCE	OBJECT-GROUP	RowStatus
TruthValue	DateAndTime	InetVersion
InetAddressType	InetAddress	InetPortNumber
InetAddressPrefixLength	InterfaceIndexOrZero	etsysModules
SnmpAdminString

Defined Types

EtsysNatTranslationProtocolRulesEntry
SEQUENCE
	etsysNatTranslationInetVersion	InetVersion
	etsysNatTranslationProtocol	Integer32
	etsysNatTranslationPort	InetPortNumber
	etsysNatTranslationTimeout	Unsigned32
	etsysNatTranslationOneShot	INTEGER
	etsysNatTranslationRowStatus	RowStatus

EtsysNatPoolEntry
SEQUENCE
	etsysNatPoolAddressType	InetAddressType
	etsysNatPoolName	SnmpAdminString
	etsysNatPoolFirstIpAddr	InetAddress
	etsysNatPoolLastIpAddr	InetAddress
	etsysNatPoolPrefixLen	InetAddressPrefixLength
	etsysNatPoolNextIpAddr	InetAddress
	etsysNatPoolAddrCount	Gauge32
	etsysNatPoolAddrUsed	Gauge32
	etsysNatPoolAddrAlloc	Gauge32
	etsysNatPoolOutOfAddrs	Counter32
	etsysNatPoolPortAlloc	Gauge32
	etsysNatPoolOutOfPorts	Counter32
	etsysNatPoolConns	Gauge32
	etsysNatPoolHits	Counter32
	etsysNatPoolListRulesCount	Gauge32
	etsysNatPoolLsnatVservers	Gauge32
	etsysNatPoolRowStatus	RowStatus

EtsysNatListRuleEntry
SEQUENCE
	etsysNatListRuleInetVersion	InetVersion
	etsysNatListRuleDirection	INTEGER
	etsysNatListRuleMatchType	INTEGER
	etsysNatListRuleName	SnmpAdminString
	etsysNatListRuleInsideVrfName	SnmpAdminString
	etsysNatListRulePoolName	SnmpAdminString
	etsysNatListRuleIfIndex	InterfaceIndexOrZero
	etsysNatListRuleOverloaded	TruthValue
	etsysNatListRuleConns	Gauge32
	etsysNatListRuleHits	Counter32
	etsysNatListRuleRowStatus	RowStatus

EtsysNatStaticRuleEntry
SEQUENCE
	etsysNatStaticRuleAddressType	InetAddressType
	etsysNatStaticRuleDirection	INTEGER
	etsysNatStaticRuleMatchType	INTEGER
	etsysNatStaticRuleProtocol	INTEGER
	etsysNatStaticRuleLocalIpAddr	InetAddress
	etsysNatStaticRuleLocalPort	InetPortNumber
	etsysNatStaticRuleGlobalIpAddr	InetAddress
	etsysNatStaticRuleGlobalPort	InetPortNumber
	etsysNatStaticRuleInsideVrfName	SnmpAdminString
	etsysNatStaticRuleOverloaded	TruthValue
	etsysNatStaticRuleConns	Gauge32
	etsysNatStaticRuleHits	Counter32
	etsysNatStaticRuleReservedBindingId	Unsigned32
	etsysNatStaticRuleRowStatus	RowStatus

EtsysNatBindingEntry
SEQUENCE
	etsysNatBindingId	Unsigned32
	etsysNatBindingState	INTEGER
	etsysNatBindingAddressType	InetAddressType
	etsysNatBindingForwardSrcIp	InetAddress
	etsysNatBindingForwardSrcPort	InetPortNumber
	etsysNatBindingForwardDstIp	InetAddress
	etsysNatBindingForwardDstPort	InetPortNumber
	etsysNatBindingReverseSrcIp	InetAddress
	etsysNatBindingReverseSrcPort	InetPortNumber
	etsysNatBindingReverseDstIp	InetAddress
	etsysNatBindingReverseDstPort	InetPortNumber
	etsysNatBindingRuleType	INTEGER
	etsysNatBindingPoolName	SnmpAdminString
	etsysNatBindingProtocol	Integer32
	etsysNatBindingAlgType	INTEGER
	etsysNatBindingFtpDataChannelCount	Unsigned32
	etsysNatBindingIcmpFwdIdent	Unsigned32
	etsysNatBindingIcmpRevIdent	Unsigned32
	etsysNatBindingHWConns	Gauge32
	etsysNatBindingCreationDate	DateAndTime
	etsysNatBindingExpirationDate	DateAndTime
	etsysNatBindingIdleTime	Unsigned32
	etsysNatBindingExpireTime	Unsigned32
	etsysNatBindingClear	TruthValue

Defined Values

etsysNatMIB		1.3.6.1.4.1.5624.1.2.75
The Enterasys Networks Proprietary MIB module for entities implementing NAT.
MODULE-IDENTITY

etsysNatGlobal		1.3.6.1.4.1.5624.1.2.75.1
OBJECT IDENTIFIER

etsysNatGlobalStats		1.3.6.1.4.1.5624.1.2.75.1.1
OBJECT IDENTIFIER

etsysNatGlobalIpv4Config		1.3.6.1.4.1.5624.1.2.75.1.2
OBJECT IDENTIFIER

etsysNatTables		1.3.6.1.4.1.5624.1.2.75.2
OBJECT IDENTIFIER

etsysNatConformance		1.3.6.1.4.1.5624.1.2.75.3
OBJECT IDENTIFIER

etsysNatStatsPoolsUsed		1.3.6.1.4.1.5624.1.2.75.1.1.1
This object contains the number of NAT Pools currently configured.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStatsListRulesUsed		1.3.6.1.4.1.5624.1.2.75.1.1.2
This object contains the number of NAT List Rules currently configured.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStatsStaticRulesUsed		1.3.6.1.4.1.5624.1.2.75.1.1.3
This object contains the number of NAT Static Rules currently configured.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStatsAddressUsed		1.3.6.1.4.1.5624.1.2.75.1.1.4
This object contains the number of NAT IP Addresses currently configured.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStatsPortMapsUsed		1.3.6.1.4.1.5624.1.2.75.1.1.5
This object contains the number of NAT Port Maps currently configured.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStatsBindingsCurrent		1.3.6.1.4.1.5624.1.2.75.1.1.6
This object contains the current number of active NAT bindings.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStatsBindingsHigh		1.3.6.1.4.1.5624.1.2.75.1.1.7
This object contains the highest number of NAT bindings active at one time.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStatsBindingsDeleted		1.3.6.1.4.1.5624.1.2.75.1.1.8
This object contains the total number of NAT bindings that have been deleted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatStatsBindingsTotal		1.3.6.1.4.1.5624.1.2.75.1.1.9
This object contains the total number of NAT bindings created.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatStatsBindingsExhausted		1.3.6.1.4.1.5624.1.2.75.1.1.10
This object contains the number of times a request to create a NAT binding failed because there were no available free entries.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatStatsBindingsMaxReached		1.3.6.1.4.1.5624.1.2.75.1.1.11
This object contains the number of times a request to create a NAT binding failed because the maximum number of bindings specified in etsysNatConfigMaxEntries allowed has been reached.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatStatsBindingsNoIpAddr		1.3.6.1.4.1.5624.1.2.75.1.1.12
This object contains the number of times a request to create a NAT binding failed because there were no available configured IP addresses to establish a binding.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatStatsBindingsNoPortmapPort		1.3.6.1.4.1.5624.1.2.75.1.1.13
This object contains the number of times a request to create a NAT binding failed because there were no available Port Map Port entries to establish a binding.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatStatsBindingsNoFtpALG		1.3.6.1.4.1.5624.1.2.75.1.1.14
This object contains the number of times a request to create a NAT binding failed because there were no available FTP ALG's to establish a binding.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatStatsBindingsPerSecond		1.3.6.1.4.1.5624.1.2.75.1.1.15
This object contains the average number of NAT bindings created per second. Normalized for 5 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStatsClear		1.3.6.1.4.1.5624.1.2.75.1.1.16
Setting this object to a value of true(1) will clear NAT statistics and cause the following objects to be reset to zero and new values generated: etsysNatStatsBindingsDeleted, etsysNatStatsBindingsTotal, etsysNatStatsBindingsExhausted, etsysNatStatsBindingsMaxReached, etsysNatStatsBindingsNoIpAddr, etsysNatStatsBindingsNoPortmapPort, etsysNatStatsBindingsNoFtpALG, etsysNatStatsBindingsPerSecond. The following etsysNatStatsBindingsHigh object will be reset to its current active count. Setting this object to a value of false(2) has no effect. This object will always return a value of false(2).
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

etsysNatStatsClearDateAndTime		1.3.6.1.4.1.5624.1.2.75.1.1.17
The date / time the NAT statistics were cleared.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

etsysNatStatsTranslationProtocolRulesCount		1.3.6.1.4.1.5624.1.2.75.1.1.18
The number of etsysNatTranslationProtocolRulesEntry in the etsysNatTranslationProtocolRulesTable
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStatsMinTimeoutValue		1.3.6.1.4.1.5624.1.2.75.1.1.19
The minimum timeout value allowable for NAT timeouts.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etsysNatStatsMaxTimeoutValue		1.3.6.1.4.1.5624.1.2.75.1.1.20
The maximum timeout value allowable for NAT timeouts.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etsysNatIpv4ConfigLogTranslations		1.3.6.1.4.1.5624.1.2.75.1.2.1
This object contains the state of NAT IPv4 Translations logging. - `disabled', a log message will not be generated when a NAT binding is either created or deleted. - `enabled', a log message will be generated when a NAT binding is either created or deleted.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

etsysNatIpv4ConfigInspectDNS		1.3.6.1.4.1.5624.1.2.75.1.2.2
This object contains the state of NAT IPv4 Inspect/Fix up DNS. NAT DNS packet inspection and fix up consists of parsing DNS request or response packets, identifying IP addresses contained within that may need to be NAT'ed, and fixing up the DNS packet with the appropriate NAT translations. - `disabled', NAT does not inspect DNS packets that are being forwarded by the NAT process. - `enabled', NAT inspects DNS packets that are being forwarded by the NAT process.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

etsysNatIpv4ConfigFtpCtrlPort		1.3.6.1.4.1.5624.1.2.75.1.2.3
This object contains the NAT IPv4 FTP control port.
Status: current	Access: read-write
OBJECT-TYPE
	InetPortNumber	1..65535

etsysNatIpv4ConfigMaxEntries		1.3.6.1.4.1.5624.1.2.75.1.2.4
This object contains the maximum number of NAT IPv4 Translation entries. A value of '0' indicates that there is no limit.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0 \| 1..4294967295

etsysNatIpv4ConfigTimeout		1.3.6.1.4.1.5624.1.2.75.1.2.5
This object contains the general NAT IPv4 idle translation timeout value.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

etsysNatIpv4ConfigUdpTimeout		1.3.6.1.4.1.5624.1.2.75.1.2.6
This object contains the NAT IPv4 UDP idle translation timeout value.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

etsysNatIpv4ConfigTcpTimeout		1.3.6.1.4.1.5624.1.2.75.1.2.7
This object contains the NAT IPv4 TCP idle translation timeout value.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

etsysNatIpv4ConfigFtpTimeout		1.3.6.1.4.1.5624.1.2.75.1.2.8
This object contains the NAT IPv4 FTP idle translation timeout value.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

etsysNatIpv4ConfigDnsTimeout		1.3.6.1.4.1.5624.1.2.75.1.2.9
This object contains the NAT IPv4 DNS idle translation timeout value.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

etsysNatIpv4ConfigIcmpTimeout		1.3.6.1.4.1.5624.1.2.75.1.2.10
This object contains the NAT IPv4 ICMP idle translation timeout value.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

etsysNatIpv4ConfigFinRstTimeout		1.3.6.1.4.1.5624.1.2.75.1.2.11
The timeout value after TCP FIN/RST observed on IPv4 NAT bindings. Setting a value of '0' results in this feature being disabled.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0 \| 1..4294967295

etsysNatIpv4ConfigFinRstTimeoutHalfClosedStatus		1.3.6.1.4.1.5624.1.2.75.1.2.12
This object indicates if the IPv4 TCP FIN/RST timeout will apply to bindings only when the hardware connections have aged out. - `disabled', indicates the IPv4 TCP FIN/RST timeout does not apply to half closed bindings. - `enabled', indicates the IPv4 TCP FIN/RST timeout applies to half closed bindings.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

etsysNatTranslationProtocolRulesTable		1.3.6.1.4.1.5624.1.2.75.2.1
A table of entries defining NAT rules for non standard protocols.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EtsysNatTranslationProtocolRulesEntry

etsysNatTranslationProtocolRulesEntry		1.3.6.1.4.1.5624.1.2.75.2.1.1
An entry in the etsysNatTranslationProtocolRulesTable defining the configuration values for a unique NAT Translation Protocol entry. The Translation Protocol Rules Table entry defines the protocol and timeout value for a NAT Translation Protocol.
Status: current	Access: not-accessible
OBJECT-TYPE
	EtsysNatTranslationProtocolRulesEntry

etsysNatTranslationInetVersion		1.3.6.1.4.1.5624.1.2.75.2.1.1.1
The Internet address version of the NAT Translation Protocol Rule.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetVersion

etsysNatTranslationProtocol		1.3.6.1.4.1.5624.1.2.75.2.1.1.2
The NAT Translation Internet Protocol number. A value of any(0) indicates that any protocol is allowed. Common IP Protocol values are ICMP(1), TCP(6) or UDP(17). All IP Protocol values except for TCP and UDP require a etsysNatTranslationPort value of '0'. TCP or UDP may have a non zero value in etsysNatTranslationPort.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0 \| 1..255

etsysNatTranslationPort		1.3.6.1.4.1.5624.1.2.75.2.1.1.3
The port assigned to this NAT Translation Protocol entry. A value of '0' indicates any port is allowed for this NAT Translation Protocol entry. An entry in etsysNatTranslationProtocol of either TCP(6) or UDP(17) may contain a non-zero value in this entry indicating the specific port assigned for this protocol. Any other value in etsysNatTranslationProtocol requires that this entry be set to '0'.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetPortNumber	0 \| 1..65535

etsysNatTranslationTimeout		1.3.6.1.4.1.5624.1.2.75.2.1.1.4
The timeout value for idle NAT translations using this NAT Translation Protocol entry.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

etsysNatTranslationOneShot		1.3.6.1.4.1.5624.1.2.75.2.1.1.5
This object enables the One Shot feature for this NAT Translation Protocol entry. One Shot is a feature specific to protocol bindings such as ICMP and UDP traffic such as DNS which are generally bi-directional and usually only send one packet in each direction. One Shot provides the benefit of quickly cleaning up such bindings given their temporary nature.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

etsysNatTranslationRowStatus		1.3.6.1.4.1.5624.1.2.75.2.1.1.6
This object permits management of the table by facilitating actions such as row creation and deletion. The value of this object has no effect on whether other objects in the conceptual row can be modified. The only allowable row status of this conceptual row in the table are: active(1) - The NAT Translation Protocol entry is available for use in NAT operations. createAndGo(4) - This is the preferred mechanism for creating conceptual rows in this table. A valid etsysNatTranslationProtocol must be present. A value in etsysNatTranslationProtocol not equal to either TCP(6), UDP(17) requires a '0' value in etsysNatTranslationPort. There are no other writable leaves so a successful createAndGo will always transition a new entry to the active(1) state. destroy(6) - This will remove the etsysNatTranslationProtocolRulesEntry from the etsysNatTranslationProtocolRulesTable and make it unavailable for NAT operations.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

etsysNatPoolTable		1.3.6.1.4.1.5624.1.2.75.2.2
A table of entries defining the operational characteristics of NAT Pools.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EtsysNatPoolEntry

etsysNatPoolEntry		1.3.6.1.4.1.5624.1.2.75.2.2.1
An entry in the etsysNatPoolTable containing the operational characteristics of a NAT Pool. A NAT Pool defines a range of public (outside) IP addresses defining this NAT pool and is identified by etsysNatPoolName.
Status: current	Access: not-accessible
OBJECT-TYPE
	EtsysNatPoolEntry

etsysNatPoolAddressType		1.3.6.1.4.1.5624.1.2.75.2.2.1.1
The Internet Protocol version. The value of this property affects the size and format of: etsysNatPoolFirstIpAddr, etsysNatPoolLastIpAddr, and etsysNatPoolNextIpAddr. All objects must be of the same INET Address Type.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

etsysNatPoolName		1.3.6.1.4.1.5624.1.2.75.2.2.1.2
This object contains the unique name of the NAT Pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpAdminString	Size(1..63)

etsysNatPoolFirstIpAddr		1.3.6.1.4.1.5624.1.2.75.2.2.1.3
The assigned IP address represents the first IP address in the range for this NAT Pool entry.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(4\|16)

etsysNatPoolLastIpAddr		1.3.6.1.4.1.5624.1.2.75.2.2.1.4
The assigned IP address represents the last IP address in the range for this NAT Pool entry.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress	Size(4\|16)

etsysNatPoolPrefixLen		1.3.6.1.4.1.5624.1.2.75.2.2.1.5
The length of the IP network mask used to refine the range of IP addresses defined by etsysNatPoolFirstIpAddr and etsysNatPoolLastIpAddr in defining the range of IP addresses for this NAT Pool entry. The values for the index objects etsysNatPoolFirstIpAddr, etsysNatPoolLastIpAddr and etsysNatPoolPrefixLen must be consistent. If a prefix length of '0' is specified than all addresses in the range are used.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressPrefixLength

etsysNatPoolNextIpAddr		1.3.6.1.4.1.5624.1.2.75.2.2.1.6
The Next NAT IP address that the pool is due to assign to a dynamic translation binding
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress	Size(4\|16)

etsysNatPoolAddrCount		1.3.6.1.4.1.5624.1.2.75.2.2.1.7
The total number of IP addresses assigned to this NAT Pool entry.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatPoolAddrUsed		1.3.6.1.4.1.5624.1.2.75.2.2.1.8
The total number of IP addresses in use for this NAT Pool entry.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatPoolAddrAlloc		1.3.6.1.4.1.5624.1.2.75.2.2.1.9
The total number of IP addresses allocated for this NAT Pool entry.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatPoolOutOfAddrs		1.3.6.1.4.1.5624.1.2.75.2.2.1.10
The number of times an allocation of a Pool entry failed because there were no available NAT IP addresses for this NAT Pool entry.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatPoolPortAlloc		1.3.6.1.4.1.5624.1.2.75.2.2.1.11
The total number of Port Maps allocated for this Nat Pool entry.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatPoolOutOfPorts		1.3.6.1.4.1.5624.1.2.75.2.2.1.12
The number of times an allocation of a Pool entry failed because there were no available NAT Port Maps for this NAT Pool entry.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatPoolConns		1.3.6.1.4.1.5624.1.2.75.2.2.1.13
The current number of active NAT connections established using this NAT Pool entry.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatPoolHits		1.3.6.1.4.1.5624.1.2.75.2.2.1.14
The total number of hits this NAT Pool has received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatPoolListRulesCount		1.3.6.1.4.1.5624.1.2.75.2.2.1.15
The total number of List Rules (etsysNatListPoolName) configured using this Nat Pool entry.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatPoolLsnatVservers		1.3.6.1.4.1.5624.1.2.75.2.2.1.16
The number of Virtual Servers (etsysLsnatVserverSourceNatPool) using this Nat Pool.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatPoolRowStatus		1.3.6.1.4.1.5624.1.2.75.2.2.1.17
This object permits management of the table by facilitating actions such as row creation and deletion. The value of this object has no effect on whether other objects in the conceptual row can be modified. The only allowable row status of this conceptual row in the table are: active(1) - The NAT Pool entry is available for use by NAT operations. Other writable leaves in this table MAY be modified while the row is in the active state. createAndGo(4) - This is the preferred mechanism for creating conceptual rows in this table. A valid createAndGo requires a unique etsysNatPoolName, errors resulting from existing etsysNatPoolNames will result in the row not being created. A valid createAndGo also requires sets to these leaves as part of a multi-varbind set when creating the instance: etsysNatPoolFirstIpAddr, etsysNatPoolLastIpAddr, etsysNatPoolPrefixLen A valid createAndGo also requires a valid IP address range and etsysNatPoolPrefixLen, errors resulting from an invalid IP range or prefix length will result in the row not being created. There are no other writable leaves so a successful createAndGo will always transition a new entry to the active(1) state. destroy(6) - This will remove the etsysNatPoolEntry from the etsysNatPoolTable and make it unavailable for NAT operations. This will result in any NAT List table entries (etsysNatListPoolName) using this entry to be deleted. In addition this will also result in all associated LSNAT Virtual Server Table entries (etsysLsnatVserverSourceNatPool) to also be deleted.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

etsysNatListRuleTable		1.3.6.1.4.1.5624.1.2.75.2.3
A table of entries defining the operational characteristics of NAT Lists rules.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EtsysNatListRuleEntry

etsysNatListRuleEntry		1.3.6.1.4.1.5624.1.2.75.2.3.1
An entry in the etsysNatListRuleTable containing the operational characteristics of a NAT List rule. A NAT List rule defines the operational characteristics for the forming of dynamic address bindings from a pre-configured address pool (etsysNatPoolName) of public outside addresses and a pre-configured access-list (etsysNatListRuleName) of local inside addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	EtsysNatListRuleEntry

etsysNatListRuleInetVersion		1.3.6.1.4.1.5624.1.2.75.2.3.1.1
The Internet address version of the NAT List rule. The value of etsysNatListRuleInetVersion must be consistent with the value of etsysNatPoolAddressType defined by the etsysNatPoolName associated with this etsysNatListRuleEntry.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetVersion

etsysNatListRuleDirection		1.3.6.1.4.1.5624.1.2.75.2.3.1.2
This value identifies if this NAT List rule is associated with an 'inside' or 'outside' network.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	inside(1), outside(2)

etsysNatListRuleMatchType		1.3.6.1.4.1.5624.1.2.75.2.3.1.3
This value identifies if this NAT List rule is associated with a 'source' or 'destination' packet.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	source(1), destination(2)

etsysNatListRuleName		1.3.6.1.4.1.5624.1.2.75.2.3.1.4
This object contains the unique name of the access-list of IP addresses to translate for the inside source address defined by this NAT List rule.
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpAdminString	Size(1..64)

etsysNatListRuleInsideVrfName		1.3.6.1.4.1.5624.1.2.75.2.3.1.5
This object contains the unique name of the Inside VRF for cross VRF NAT for this NAT List rule.
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpAdminString	Size(1..16)

etsysNatListRulePoolName		1.3.6.1.4.1.5624.1.2.75.2.3.1.6
This object contains the unique name of the NAT Pool. This value must be set with the row status set that creates the entry. The value may not be changed after the row is created.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(1..63)

etsysNatListRuleIfIndex		1.3.6.1.4.1.5624.1.2.75.2.3.1.7
The outside NAT List rule interface index used for this NAT List rule entry. A value of '0' indicates that this List Rule would apply to 'any' interface. This value must be set with the row status set that creates the entry. The value may not be changed after the row is created.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

etsysNatListRuleOverloaded		1.3.6.1.4.1.5624.1.2.75.2.3.1.8
This entry indicates if this NAT List rule entry will be overloaded enabling Network Address Port Translation (NAPT). This value must be set with the row status set that creates the entry. The value may not be changed after the row is created.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

etsysNatListRuleConns		1.3.6.1.4.1.5624.1.2.75.2.3.1.9
The current number of active NAT connections established on this NAT List rule entry.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatListRuleHits		1.3.6.1.4.1.5624.1.2.75.2.3.1.10
The total number of hits this NAT List rule entry has received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatListRuleRowStatus		1.3.6.1.4.1.5624.1.2.75.2.3.1.11
This object permits management of the table by facilitating actions such as row creation and deletion. The value of this object has no effect on whether other objects in the conceptual row can be modified. The only allowable row status of this conceptual row in the table are: active(1) - The NAT List rule entry is available for use in NAT operations. createAndGo(4) - This is the preferred mechanism for creating conceptual rows in this table. A valid createAndGo requires an active(1) etsysNatPoolName be provided for the etsysNatListRulePoolName. If the list rule leaves: etsysNatListRuleIfIndex or etsysNatListRuleOverloaded are to be set, then can only be set at create time. Sets to these leaves: etsysNatListRulePoolName, etsysNatListRuleIfIndex, etsysNatListRuleOverloaded Will not be accepted after the entry is created. Errors resulting from an invalid configuration will result in the row not being created. There are no other writable leaves so a successful createAndGo will always transition a new entry to the active(1) state. destroy(6) - This will remove the etsysNatListRuleEntry from the etsysNatListRuleTable and make it unavailable for NAT operations.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

etsysNatStaticRuleTable		1.3.6.1.4.1.5624.1.2.75.2.4
A table of entries defining the operational characteristics of NAT Static rules.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EtsysNatStaticRuleEntry

etsysNatStaticRuleEntry		1.3.6.1.4.1.5624.1.2.75.2.4.1
An entry in the etsysNatStaticRuleTable containing the operational characteristics of a NAT Static rule. A NAT Static rule defines a range of private (inside) IP addresses and operational characteristics for which specified NAT Static rules will be applied. Static inside address translations are one-to-one bindings between the inside and outside IP addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	EtsysNatStaticRuleEntry

etsysNatStaticRuleAddressType		1.3.6.1.4.1.5624.1.2.75.2.4.1.1
The Internet Protocol version. The value of this property affects the size and format of: etsysNatStaticRuleLocalIpAddr, and etsysNatStaticRuleGlobalIpAddr both objects must be of the same INET Address Type.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

etsysNatStaticRuleDirection		1.3.6.1.4.1.5624.1.2.75.2.4.1.2
This value identifies if this NAT Static rule is associated with an 'inside' or 'outside' network.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	inside(1), outside(2)

etsysNatStaticRuleMatchType		1.3.6.1.4.1.5624.1.2.75.2.4.1.3
This value identifies if this NAT List rule is associated with a 'source' or 'destination' packet.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	source(1), destination(2)

etsysNatStaticRuleProtocol		1.3.6.1.4.1.5624.1.2.75.2.4.1.4
This object contains the NAT Binding protocol type. A value of '0' indicates that the protocol type is 'any' and requires that etsysNatStaticRuleLocalPort and etsysNatStaticRuleGlobalPort be set to a value of '0'. A value of tcp(6) or udp(17) indicates that this entry defines NAPT translation of inside source addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	any(0), tcp(6), udp(17)

etsysNatStaticRuleLocalIpAddr		1.3.6.1.4.1.5624.1.2.75.2.4.1.5
The NAT Static Local rule IP addresses representing the local IP address for this NAT Static rule entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress	Size(4\|16)

etsysNatStaticRuleLocalPort		1.3.6.1.4.1.5624.1.2.75.2.4.1.6
The NAT Static Local rule port representing the local port for this NAT Static rule entry. This value is only meaningful if the etsysNatStaticRuleProtocol is set to tcp(6) or udp(17) otherwise this value must be set to '0'.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetPortNumber	0 \| 1..65535

etsysNatStaticRuleGlobalIpAddr		1.3.6.1.4.1.5624.1.2.75.2.4.1.7
The NAT Static Global rule IP addresses representing the global IP address for this NAT Static rule entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress	Size(4\|16)

etsysNatStaticRuleGlobalPort		1.3.6.1.4.1.5624.1.2.75.2.4.1.8
The NAT Static Global rule port representing the global port for this NAT Static rule entry. This value is only meaningful if the etsysNatStaticRuleProtocol is set to tcp(6) or udp(17) otherwise this value must be set to '0'.
Status: current	Access: not-accessible
OBJECT-TYPE
	InetPortNumber	0 \| 1..65535

etsysNatStaticRuleInsideVrfName		1.3.6.1.4.1.5624.1.2.75.2.4.1.9
This object contains the unique name of the Inside VRF for cross VRF NAT.
Status: current	Access: not-accessible
OBJECT-TYPE
	SnmpAdminString	Size(1..16)

etsysNatStaticRuleOverloaded		1.3.6.1.4.1.5624.1.2.75.2.4.1.10
This entry indicates if this NAT Static rule entry is overloaded enabling Network Address Port Translation (NAPT). If the etsysNatStaticRuleProtocol is set to tcp(6) or udp(17) this value will display true(1) otherwise it will display false(2).
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

etsysNatStaticRuleConns		1.3.6.1.4.1.5624.1.2.75.2.4.1.11
The current number of active NAT connections established on this NAT Static rule entry.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatStaticRuleHits		1.3.6.1.4.1.5624.1.2.75.2.4.1.12
The total number of hits this NAT Static rule entry has received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

etsysNatStaticRuleReservedBindingId		1.3.6.1.4.1.5624.1.2.75.2.4.1.13
This value is a unique NAT Static rule binding identifier reserved by NAT at the creation of this Static rule entry. A value of '0' indicates that there is no binding identifier currently set for this static entry.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etsysNatStaticRuleRowStatus		1.3.6.1.4.1.5624.1.2.75.2.4.1.14
This object permits management of the table by facilitating actions such as row creation and deletion. The value of this object has no effect on whether other objects in the conceptual row can be modified. The only allowable row status of this conceptual row in the table are: active(1) - The NAT Static rule entry is available for use in NAT operations. createAndGo(4) - This is the preferred mechanism for creating conceptual rows in this table. A valid createAndGo requires a valid etsysNatStaticRuleProtocol, a valid IP addresses for etsysNatStaticRuleLocalIpAddr and etsysNatStaticRuleGlobalIpAddr, and a valid port for etsysNatStaticRuleLocalPort and etsysNatStaticRuleGlobalPort, errors resulting from an invalid configuration will result in the row not being created. There are no other writable leaves so a successful createAndGo will always transition a new entry to the active(1) state. destroy(6) - This will remove the etsysNatStaticRuleEntry from the etsysNatStaticRuleTable, remove it's static NAT binding entry and make it unavailable for NAT operations.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

etsysNatBindingTable		1.3.6.1.4.1.5624.1.2.75.2.5
A table of entries defining active NAT bindings.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EtsysNatBindingEntry

etsysNatBindingEntry		1.3.6.1.4.1.5624.1.2.75.2.5.1
An entry in the etsysNatBindingTable defining an active NAT binding. The etsysNatBindingEntry defines the runtime characteristics of a NAT binding.
Status: current	Access: not-accessible
OBJECT-TYPE
	EtsysNatBindingEntry

etsysNatBindingId		1.3.6.1.4.1.5624.1.2.75.2.5.1.1
This value is a unique NAT binding identifier assigned by NAT during binding creation.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

etsysNatBindingState		1.3.6.1.4.1.5624.1.2.75.2.5.1.2
This object contains the state of the binding. - `init', indicates this binding is initializing. - `syncing', indicates this binding is syncing. - `waitroute', indicates this binding is in a wait route state. - `established', indicates this binding is established.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	init(1), syncing(2), waitroute(3), established(4)

etsysNatBindingAddressType		1.3.6.1.4.1.5624.1.2.75.2.5.1.3
The Internet Protocol version. The value of this property affects the size and format of: etsysNatBindingForwardSrcIp, etsysNatBindingForwardDstIp, etsysNatBindingReverseSrcIp and etsysNatBindingReverseDstIp objects.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

etsysNatBindingForwardSrcIp		1.3.6.1.4.1.5624.1.2.75.2.5.1.4
The forward source IP address for this NAT binding entry.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

etsysNatBindingForwardSrcPort		1.3.6.1.4.1.5624.1.2.75.2.5.1.5
The forward source port for this NAT binding entry. This value is only meaningful if the etsysNatBindingProtocol is set to tcp(6) or udp(17) otherwise this object will return a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber	0 \| 1..65535

etsysNatBindingForwardDstIp		1.3.6.1.4.1.5624.1.2.75.2.5.1.6
The forward destination IP address for this NAT binding entry.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

etsysNatBindingForwardDstPort		1.3.6.1.4.1.5624.1.2.75.2.5.1.7
The forward destination port for this NAT binding entry. This value is only meaningful if the etsysNatBindingProtocol is set to tcp(6) or udp(17) otherwise this object will return a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber	0 \| 1..65535

etsysNatBindingReverseSrcIp		1.3.6.1.4.1.5624.1.2.75.2.5.1.8
The reverse NAT source IP address for this NAT binding entry.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

etsysNatBindingReverseSrcPort		1.3.6.1.4.1.5624.1.2.75.2.5.1.9
The reverse NAT source port for this NAT binding entry. This value is only meaningful if the etsysNatBindingProtocol is set to tcp(6) or udp(17) otherwise this object will return a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber	0 \| 1..65535

etsysNatBindingReverseDstIp		1.3.6.1.4.1.5624.1.2.75.2.5.1.10
The reverse NAT destination IP address for this NAT binding entry.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

etsysNatBindingReverseDstPort		1.3.6.1.4.1.5624.1.2.75.2.5.1.11
The reverse NAT destination port for this NAT binding entry. This value is only meaningful if the etsysNatBindingProtocol is set to tcp(6) or udp(17) otherwise this object will return a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber	0 \| 1..65535

etsysNatBindingRuleType		1.3.6.1.4.1.5624.1.2.75.2.5.1.12
This object contains the NAT Binding Rule type. - `static', indicates that the NAT binding is static. - `dynamic', indicates that the NAT binding is dynamic. - `staticReserved', indicates that the NAT binding is static (reserved). - `dynamicReserved', indicates that the NAT binding is dynamic (reserved).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	static(1), dynamic(2), staticReserved(3), dynamicReserved(4)

etsysNatBindingPoolName		1.3.6.1.4.1.5624.1.2.75.2.5.1.13
This object contains the name of the NAT Pool (etsysNatPoolName) associated with this NAT binding.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString	Size(1..63)

etsysNatBindingProtocol		1.3.6.1.4.1.5624.1.2.75.2.5.1.14
This object contains the NAT Binding protocol type. A value of '0' indicates that the protocol type is 'any'. Common IP Protocol values are TCP(6) and UDP(17).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0 \| 1..255

etsysNatBindingAlgType		1.3.6.1.4.1.5624.1.2.75.2.5.1.15
This object contains the NAT ALG Binding type. - `none', indicates that this NAT binding is not an ALG binding. - `ftpctrl', indicates that this NAT binding is a FTP control binding. - `ftpdata, indicates that this NAT binding is a FTP data binding. - `tftpctrl', indicates that this NAT binding is a TFTP control binding. - `icmpecho', indicates that this NAT binding is an ICMP echo binding.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), ftpctrl(2), ftpdata(3), tftpctrl(4), icmpecho(5)

etsysNatBindingFtpDataChannelCount		1.3.6.1.4.1.5624.1.2.75.2.5.1.16
This object contains the NAT Binding FTP Data channel. This value is only significant if the etsysNatBindingAlgType is ftpctrl(2), otherwise this object will return a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0 \| 1..65535

etsysNatBindingIcmpFwdIdent		1.3.6.1.4.1.5624.1.2.75.2.5.1.17
This object contains the NAT Binding ICMP Forward ID. This value is only significant if the etsysNatBindingAlgType is icmpecho(5), otherwise this object will return a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0 \| 1..65535

etsysNatBindingIcmpRevIdent		1.3.6.1.4.1.5624.1.2.75.2.5.1.18
This object contains the NAT Binding ICMP Reverse ID. This value is only significant if the etsysNatBindingAlgType is icmpecho(5), otherwise this object will return a value of '0'.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0 \| 1..65535

etsysNatBindingHWConns		1.3.6.1.4.1.5624.1.2.75.2.5.1.19
This object contains the total number of hardware connections currently active using this NAT binding.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

etsysNatBindingCreationDate		1.3.6.1.4.1.5624.1.2.75.2.5.1.20
The creation date / time for this NAT binding entry.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

etsysNatBindingExpirationDate		1.3.6.1.4.1.5624.1.2.75.2.5.1.21
The expiration date / time for this NAT binding entry. If the NAT binding expire time (etsysNatBindingExpireTime) is '0' there is no expiration date and this object will return the current date / time.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

etsysNatBindingIdleTime		1.3.6.1.4.1.5624.1.2.75.2.5.1.22
The consecutive number of seconds this NAT binding entry has been idle.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etsysNatBindingExpireTime		1.3.6.1.4.1.5624.1.2.75.2.5.1.23
The number of idle seconds left before this NAT binding entry will age out. A value of '0' indicates that this NAT binding will not age out.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

etsysNatBindingClear		1.3.6.1.4.1.5624.1.2.75.2.5.1.24
Setting this object to a value of true(1) will cause this etsysNatBindingEntry to be deleted from the etsysNatBindingTable if the corresponding etsysNatBindingRuleType is 'dynamic(2)' or 'dynamicReserved(4)' otherwise the binding entry will not be deleted. Setting this object to a value of false(2) has no effect. This object will always return a value of false(2).
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

etsysNatMIBGroups		1.3.6.1.4.1.5624.1.2.75.3.1
OBJECT IDENTIFIER

etsysNatMIBCompliances		1.3.6.1.4.1.5624.1.2.75.3.2
OBJECT IDENTIFIER

etsysNatMIBGlobalStatsGroup		1.3.6.1.4.1.5624.1.2.75.3.1.1
The information group for NAT global resources and operations.
Status: current	Access: read-write
OBJECT-GROUP

etsysNatMIBGlobalIpv4ConfigGroup		1.3.6.1.4.1.5624.1.2.75.3.1.2
The information group for NAT IPv4 global resources and operations.
Status: current	Access: read-write
OBJECT-GROUP

etsysNatMIBTranslationProtocolRulesTableGroup		1.3.6.1.4.1.5624.1.2.75.3.1.3
The information group for NAT global IPv4 Translation Protocol Rules configuration.
Status: current	Access: read-write
OBJECT-GROUP

etsysNatMIBNatPoolTableGroup		1.3.6.1.4.1.5624.1.2.75.3.1.4
The information group for NAT Pool configurations.
Status: current	Access: read-write
OBJECT-GROUP

etsysNatMIBNatListRuleTableGroup		1.3.6.1.4.1.5624.1.2.75.3.1.5
The information group for NAT List rule configurations.
Status: current	Access: read-write
OBJECT-GROUP

etsysNatMIBNatStaticRuleTableGroup		1.3.6.1.4.1.5624.1.2.75.3.1.6
The information group for NAT static rule configurations.
Status: current	Access: read-write
OBJECT-GROUP

etsysNatMIBNatBindingTableGroup		1.3.6.1.4.1.5624.1.2.75.3.1.7
The information group for NAT bindings.
Status: current	Access: read-write
OBJECT-GROUP

etsysNatMIBCompliance		1.3.6.1.4.1.5624.1.2.75.3.2.1
The compliance statement for implementation of the Router Application Services NAT functionality.
Status: current	Access: read-only
MODULE-COMPLIANCE