ENTERASYS-IF-MIB-EXT-MIB

File: ENTERASYS-IF-MIB-EXT-MIB.mib (13443 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB P-BRIDGE-MIB ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE TEXTUAL-CONVENTION
MODULE-COMPLIANCE OBJECT-GROUP ifEntry
EnabledStatus etsysModules

Defined Types

EtsysIfOperStatusCauses  
This convention specifies the variety of functionalities that may cause an interface's ifOperStatus to be have a value other than up(1). A set bit indicates that the associated cause is influencing the interface's current ifOperStatus. adminStatus(0) - The ifAdminStatus for the interface is not up(1). linkLoss(1) - The interface has physically lost link with its partner. linkFlap(2) - The interface has been brought down by the Link Flap feature as defined by etsysLinkFlapMIB. self(3) - The interface has brought itself down. initialization(4) - The system or interface is still in the process of initializing itself. flowLimiting(5) - The interface has been brought down by the Flow Limiting feature as defined by etsysFlowLimitingMIB. policy(6) - The interface has been brought down by the Policy feature as defined by etsysPolicyProfileMIB. classOfService(7) - The interface has been brought down by the rate limiting feature defined by etsysCosMIB. ieee8021x(8) - The interface has been made dormant awaiting successful authentication by 802.1X. ieee8023lag(9) - The interface has been made dormant as a result of being an underlying physical port in a Link Aggregation. enetOam(10) - The interface has been brought down by the Ethernet OAM feature as defined by etsysEthOamExtMIB. enetOamLb(11) - The interface has been brought down by the Ethernet OAM loopback feature as defined by dot3OamMIB. macLock(12) - The interface has been brought down by the MAC Lock feature as defined in etsysMACLockingMIB. chassisBonding(13) - The interface has been brought down by the Chassis Bonding feature as defined in etsysVirtualSwitchBondingMIB. linkState(14) - The interface has been brought down by the Link-state application as defined in etsysLinkstateMIB. enetOamUld(15) - The interface has been brought down by the Ethernet OAM Unidirectional Link Detection (ULD) feature as defined by etsysEthOamExtMIB. txqMonitor(16) - The interface has been brought down by the Transmit Queue Monitor feature as defined in etsysTxqMonitorMIB. priorityFlowControl(17) - The interface has been brought down by the Priority Flow Control feature as defined in ieee8021PFCMib as it undergoes temporary buffer changes. macSec(18) - The interface has been brought down by the MACsec feature as defined by IEEE802.1X-2010 port based Network Access Control.
TEXTUAL-CONVENTION    
  BITS adminStatus(0), linkLoss(1), linkFlap(2), self(3), initialization(4), flowLimiting(5), policy(6), classOfService(7), ieee8021x(8), ieee8023lag(9), enetOam(10), enetOamLb(11), macLock(12), chassisBonding(13), linkState(14), enetOamUld(15), txqMonitor(16), priorityFlowControl(17), macSec(18)  

EtsysInterfaceExtEntry  
SEQUENCE    
  etsysIfOperStatusCause EtsysIfOperStatusCauses

Defined Values

etsysIfMibExtMIB 1.3.6.1.4.1.5624.1.2.57
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID that provide extensions to the industry standard IF-MIB.
MODULE-IDENTITY    

etsysIfMibExtObjects 1.3.6.1.4.1.5624.1.2.57.1
OBJECT IDENTIFIER    

etsysIfMibExtSystem 1.3.6.1.4.1.5624.1.2.57.1.1
OBJECT IDENTIFIER    

etsysIfMibExtInterface 1.3.6.1.4.1.5624.1.2.57.1.2
OBJECT IDENTIFIER    

etsysIfOperStateLinkChange 1.3.6.1.4.1.5624.1.2.57.1.1.1
This object controls the system wide ability to manipulate the physical link state of an interface when the interface's ifOperStatus transitions into or out of the down(2) state. A value of enabled(1) will cause an interface to drop physical link when its ifOperStatus transitions to down(2). If the interface would transition out of the down(2) state, assuming it did have link, then physical link will be restored to the interface. A value of disabled(2) will cause an interface to not alter its physical link regardless of the value of ifOperStatus. This object only affects those interfaces which have a concept of physical link.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

etsysInterfaceExtTable 1.3.6.1.4.1.5624.1.2.57.1.2.1
A table of per interface information that extends the base ifTable defined in RFC2863.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysInterfaceExtEntry

etsysInterfaceExtEntry 1.3.6.1.4.1.5624.1.2.57.1.2.1.1
An entry containing per interface information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EtsysInterfaceExtEntry  

etsysIfOperStatusCause 1.3.6.1.4.1.5624.1.2.57.1.2.1.1.1
This object indicates the various features that could cause the ifOperStatus of an interface to not be up(1).
Status: current Access: read-only
OBJECT-TYPE    
  EtsysIfOperStatusCauses  

etsysIfMibExtConformance 1.3.6.1.4.1.5624.1.2.57.2
OBJECT IDENTIFIER    

etsysIfMibExtGroups 1.3.6.1.4.1.5624.1.2.57.2.1
OBJECT IDENTIFIER    

etsysIfMibExtCompliances 1.3.6.1.4.1.5624.1.2.57.2.2
OBJECT IDENTIFIER    

etsysIfMibExtOperLinkGroup 1.3.6.1.4.1.5624.1.2.57.2.1.1
The group that controls physical link manipulation as a result of ifOperStatus changes.
Status: current Access: read-only
OBJECT-GROUP    

etsysIfMibExtOperStatusGroup 1.3.6.1.4.1.5624.1.2.57.2.1.2
The group that provides the cause of the current ifOperStatus value for a given interface.
Status: current Access: read-only
OBJECT-GROUP    

etsysIfMibExtCompliance 1.3.6.1.4.1.5624.1.2.57.2.2.1
The compliance statement for devices that support IF-MIB extensions.
Status: current Access: read-only
MODULE-COMPLIANCE