ENGENIUS-STATUS-MIB
File:
ENGENIUS-STATUS-MIB.mib (36430 bytes)
Imported modules
Imported symbols
Defined Values
engeniusstatus |
1.3.6.1.4.1.14125.3 |
The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices.
This is used as a supplement to the standard 802.11 MIB proposed by IEEE. |
MODULE-IDENTITY |
|
|
|
engenius |
1.3.6.1.4.1.14125 |
OBJECT IDENTIFIER |
|
|
|
ifCBStatus |
1.3.6.1.4.1.14125.3.3 |
OBJECT IDENTIFIER |
|
|
|
ifAPStatus |
1.3.6.1.4.1.14125.3.4 |
OBJECT IDENTIFIER |
|
|
|
cbConnectionStatus |
1.3.6.1.4.1.14125.3.1.1 |
This attribute reflects the Service Set ID used in the SSID parameter of the most recent MLME_Scan.request |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbSignalStrength |
1.3.6.1.4.1.14125.3.1.2 |
signal strength refers to the magnitude of the electric field at a reference point that is a significant distance from the transmitting antenna |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbCurrentTxRate |
1.3.6.1.4.1.14125.3.1.3 |
The transmit bit rates operated, corresponding to data rates from 1 Mb/s to 54 Mb/s. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbCurrentChannel |
1.3.6.1.4.1.14125.3.1.4 |
The operating frequency channel. Valid numbers are as defind in ISO/IEC 8802-11:1999, 15.4.6.2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbEssid |
1.3.6.1.4.1.14125.3.1.5 |
This attribute reflects the Service Set ID. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process. The connectedToSSID length is limit between 1~ 32 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbTxPower |
1.3.6.1.4.1.14125.3.1.6 |
The Tx Power is transmit power setting value. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbIpAddress |
1.3.6.1.4.1.14125.3.1.7 |
The IP address of this device used over its interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apSsidProfile-1 |
1.3.6.1.4.1.14125.3.2.1 |
This attribute reflects the Service Set ID. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process. The connectedToSSID length is limit between 1~ 32 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apSsidProfile-2 |
1.3.6.1.4.1.14125.3.2.2 |
This attribute reflects the Service Set ID. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process. The connectedToSSID length is limit between 1~ 32 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apSsidProfile-3 |
1.3.6.1.4.1.14125.3.2.3 |
This attribute reflects the Service Set ID. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process. The connectedToSSID length is limit between 1~ 32 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apSsidProfile-4 |
1.3.6.1.4.1.14125.3.2.4 |
This attribute reflects the Service Set ID. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process. The connectedToSSID length is limit between 1~ 32 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apWlanMode |
1.3.6.1.4.1.14125.3.2.5 |
The operating mode of the WLAN interface |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apCurrentChannel |
1.3.6.1.4.1.14125.3.2.6 |
The operating frequency channel. Valid numbers are as defind in ISO/IEC 8802-11:1999, 15.4.6.2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apTxPower |
1.3.6.1.4.1.14125.3.2.7 |
The operating transmission power. Valid numbers are as defind in ISO/IEC 8802-11:1999, 15.4.6.2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apIpAddress |
1.3.6.1.4.1.14125.3.2.8 |
The IP address of this device used over its interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbAth0-RxPackets |
1.3.6.1.4.1.14125.3.3.1 |
The number of packets received on the radio interface Ath0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbAth0-RxBytes |
1.3.6.1.4.1.14125.3.3.2 |
The number of bytes received on the radio interface Ath0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbAth0-RxErrors |
1.3.6.1.4.1.14125.3.3.3 |
The number of errors packets received on the radio interface Ath0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbAth0-TxPackets |
1.3.6.1.4.1.14125.3.3.4 |
The number of packets transmited on the radio interface Ath0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbAth0-TxBytes |
1.3.6.1.4.1.14125.3.3.5 |
The number of bytes transmited on the radio interface Ath0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbAth0-TxErrors |
1.3.6.1.4.1.14125.3.3.6 |
The number of error packets transmited on the radio interface Ath0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbBr0-RxPackets |
1.3.6.1.4.1.14125.3.3.7 |
The number of packets received on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbBr0-RxBytes |
1.3.6.1.4.1.14125.3.3.8 |
The number of bytes received on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbBr0-RxErrors |
1.3.6.1.4.1.14125.3.3.9 |
The number of errors packets received on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbBr0-TxPackets |
1.3.6.1.4.1.14125.3.3.10 |
The number of packets transmited on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbBr0-TxBytes |
1.3.6.1.4.1.14125.3.3.11 |
The number of bytes transmited on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbBr0-TxErrors |
1.3.6.1.4.1.14125.3.3.12 |
The number of error packets transmited on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbEth0-RxPackets |
1.3.6.1.4.1.14125.3.3.13 |
The number of packets received on the ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbEth0-RxBytes |
1.3.6.1.4.1.14125.3.3.14 |
The number of bytes received on the ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbEth0-RxErrors |
1.3.6.1.4.1.14125.3.3.15 |
The number of errors packets received on the ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbEth0-TxPackets |
1.3.6.1.4.1.14125.3.3.16 |
The number of packets transmited on the ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbEth0-TxBytes |
1.3.6.1.4.1.14125.3.3.17 |
The number of bytes transmited on the ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
cbEth0-TxErrors |
1.3.6.1.4.1.14125.3.3.18 |
The number of error packets transmited on the ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1-RxPackets |
1.3.6.1.4.1.14125.3.4.1 |
The number of packets received on the radio interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1-RxBytes |
1.3.6.1.4.1.14125.3.4.2 |
The number of bytes received on the radio interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1-RxErrors |
1.3.6.1.4.1.14125.3.4.3 |
The number of errors packets received on the radio interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1-TxPackets |
1.3.6.1.4.1.14125.3.4.4 |
The number of packets transmited on the radio interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1-TxBytes |
1.3.6.1.4.1.14125.3.4.5 |
The number of bytes transmited on the radio interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1-TxErrors |
1.3.6.1.4.1.14125.3.4.6 |
The number of error packets transmited on the radio interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2-RxPackets |
1.3.6.1.4.1.14125.3.4.7 |
The number of packets received on the radio interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2-RxBytes |
1.3.6.1.4.1.14125.3.4.8 |
The number of bytes received on the radio interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2-RxErrors |
1.3.6.1.4.1.14125.3.4.9 |
The number of errors packets received on the radio interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2-TxPackets |
1.3.6.1.4.1.14125.3.4.10 |
The number of packets transmited on the radio interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2-TxBytes |
1.3.6.1.4.1.14125.3.4.11 |
The number of bytes transmited on the radio interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2-TxErrors |
1.3.6.1.4.1.14125.3.4.12 |
The number of error packets transmited on the radio interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3-RxPackets |
1.3.6.1.4.1.14125.3.4.13 |
The number of packets received on the radio interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3-RxBytes |
1.3.6.1.4.1.14125.3.4.14 |
The number of bytes received on the radio interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3-RxErrors |
1.3.6.1.4.1.14125.3.4.15 |
The number of errors packets received on the radio interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3-TxPackets |
1.3.6.1.4.1.14125.3.4.16 |
The number of packets transmited on the radio interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3-TxBytes |
1.3.6.1.4.1.14125.3.4.17 |
The number of bytes transmited on the radio interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3-TxErrors |
1.3.6.1.4.1.14125.3.4.18 |
The number of error packets transmited on the radio interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4-RxPackets |
1.3.6.1.4.1.14125.3.4.19 |
The number of packets received on the radio interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4-RxBytes |
1.3.6.1.4.1.14125.3.4.20 |
The number of bytes received on the radio interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4-RxErrors |
1.3.6.1.4.1.14125.3.4.21 |
The number of errors packets received on the radio interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4-TxPackets |
1.3.6.1.4.1.14125.3.4.22 |
The number of packets transmited on the radio interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4-TxBytes |
1.3.6.1.4.1.14125.3.4.23 |
The number of bytes transmited on the radio interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4-TxErrors |
1.3.6.1.4.1.14125.3.4.24 |
The number of error packets transmited on the radio interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1V-RxPackets |
1.3.6.1.4.1.14125.3.4.25 |
The number of packets received on the radio vlan interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1V-RxBytes |
1.3.6.1.4.1.14125.3.4.26 |
The number of bytes received on the radio vlan interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1V-RxErrors |
1.3.6.1.4.1.14125.3.4.27 |
The number of errors packets received on the radio vlan interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1V-TxPackets |
1.3.6.1.4.1.14125.3.4.28 |
The number of packets transmited on the radio vlan interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1V-TxBytes |
1.3.6.1.4.1.14125.3.4.29 |
The number of bytes transmited on the radio vlan interface ath1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth1V-TxErrors |
1.3.6.1.4.1.14125.3.4.30 |
The number of error packets transmited on the radio vlan interface ath1 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2V-RxPackets |
1.3.6.1.4.1.14125.3.4.31 |
The number of packets received on the radio vlan interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2V-RxBytes |
1.3.6.1.4.1.14125.3.4.32 |
The number of bytes received on the radio vlan interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2V-RxErrors |
1.3.6.1.4.1.14125.3.4.33 |
The number of errors packets received on the radio vlan interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2V-TxPackets |
1.3.6.1.4.1.14125.3.4.34 |
The number of packets transmited on the radio vlan interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2V-TxBytes |
1.3.6.1.4.1.14125.3.4.35 |
The number of bytes transmited on the radio vlan interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth2V-TxErrors |
1.3.6.1.4.1.14125.3.4.36 |
The number of error packets transmited on the radio vlan interface ath2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3V-RxPackets |
1.3.6.1.4.1.14125.3.4.37 |
The number of packets received on the radio vlan interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3V-RxBytes |
1.3.6.1.4.1.14125.3.4.38 |
The number of bytes received on the radio vlan interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3V-RxErrors |
1.3.6.1.4.1.14125.3.4.39 |
The number of errors packets received on the radio vlan interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3V-TxPackets |
1.3.6.1.4.1.14125.3.4.40 |
The number of packets transmited on the radio vlan interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3V-TxBytes |
1.3.6.1.4.1.14125.3.4.41 |
The number of bytes transmited on the radio vlan interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth3V-TxErrors |
1.3.6.1.4.1.14125.3.4.42 |
The number of error packets transmited on the radio vlan interface ath3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4V-RxPackets |
1.3.6.1.4.1.14125.3.4.43 |
The number of packets received on the radio vlan interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4V-RxBytes |
1.3.6.1.4.1.14125.3.4.44 |
The number of bytes received on the radio vlan interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4V-RxErrors |
1.3.6.1.4.1.14125.3.4.45 |
The number of errors packets received on the radio vlan interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4V-TxPackets |
1.3.6.1.4.1.14125.3.4.46 |
The number of packets transmited on the radio vlan interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4V-TxBytes |
1.3.6.1.4.1.14125.3.4.47 |
The number of bytes transmited on the radio vlan interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apAth4V-TxErrors |
1.3.6.1.4.1.14125.3.4.48 |
The number of error packets transmited on the radio vlan interface ath4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr0-RxPackets |
1.3.6.1.4.1.14125.3.4.49 |
The number of packets received on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr0-RxBytes |
1.3.6.1.4.1.14125.3.4.50 |
The number of bytes received on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr0-RxErrors |
1.3.6.1.4.1.14125.3.4.51 |
The number of errors packets received on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr0-TxPackets |
1.3.6.1.4.1.14125.3.4.52 |
The number of packets transmited on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr0-TxBytes |
1.3.6.1.4.1.14125.3.4.53 |
The number of bytes transmited on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr0-TxErrors |
1.3.6.1.4.1.14125.3.4.54 |
The number of error packets transmited on the Bridge interface br0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr1-RxPackets |
1.3.6.1.4.1.14125.3.4.55 |
The number of packets received on the Bridge interface br1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr1-RxBytes |
1.3.6.1.4.1.14125.3.4.56 |
The number of bytes received on the Bridge interface br1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr1-RxErrors |
1.3.6.1.4.1.14125.3.4.57 |
The number of errors packets received on the Bridge interface br1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr1-TxPackets |
1.3.6.1.4.1.14125.3.4.58 |
The number of packets transmited on the Bridge interface br1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr1-TxBytes |
1.3.6.1.4.1.14125.3.4.59 |
The number of bytes transmited on the Bridge interface br1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr1-TxErrors |
1.3.6.1.4.1.14125.3.4.60 |
The number of error packets transmited on the Bridge interface br1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr2-RxPackets |
1.3.6.1.4.1.14125.3.4.61 |
The number of packets received on the Bridge interface br2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr2-RxBytes |
1.3.6.1.4.1.14125.3.4.62 |
The number of bytes received on the Bridge interface br2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr2-RxErrors |
1.3.6.1.4.1.14125.3.4.63 |
The number of errors packets received on the Bridge interface br2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr2-TxPackets |
1.3.6.1.4.1.14125.3.4.64 |
The number of packets transmited on the Bridge interface br2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr2-TxBytes |
1.3.6.1.4.1.14125.3.4.65 |
The number of bytes transmited on the Bridge interface br2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr2-TxErrors |
1.3.6.1.4.1.14125.3.4.66 |
The number of error packets transmited on the Bridge interface br2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr3-RxPackets |
1.3.6.1.4.1.14125.3.4.67 |
The number of packets received on the Bridge interface br3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr3-RxBytes |
1.3.6.1.4.1.14125.3.4.68 |
The number of bytes received on the Bridge interface br3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr3-RxErrors |
1.3.6.1.4.1.14125.3.4.69 |
The number of errors packets received on the Bridge interface br3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr3-TxPackets |
1.3.6.1.4.1.14125.3.4.70 |
The number of packets transmited on the Bridge interface br3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr3-TxBytes |
1.3.6.1.4.1.14125.3.4.71 |
The number of bytes transmited on the Bridge interface br3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr3-TxErrors |
1.3.6.1.4.1.14125.3.4.72 |
The number of error packets transmited on the Bridge interface br3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr4-RxPackets |
1.3.6.1.4.1.14125.3.4.73 |
The number of packets received on the Bridge interface br4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr4-RxBytes |
1.3.6.1.4.1.14125.3.4.74 |
The number of bytes received on the Bridge interface br4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr4-RxErrors |
1.3.6.1.4.1.14125.3.4.75 |
The number of errors packets received on the Bridge interface br4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr4-TxPackets |
1.3.6.1.4.1.14125.3.4.76 |
The number of packets transmited on the Bridge interface br4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr4-TxBytes |
1.3.6.1.4.1.14125.3.4.77 |
The number of bytes transmited on the Bridge interface br4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apBr4-TxErrors |
1.3.6.1.4.1.14125.3.4.78 |
The number of error packets transmited on the Bridge interface br4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0-RxPackets |
1.3.6.1.4.1.14125.3.4.79 |
The number of packets received on the Ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0-RxBytes |
1.3.6.1.4.1.14125.3.4.80 |
The number of bytes received on the Ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0-RxErrors |
1.3.6.1.4.1.14125.3.4.81 |
The number of errors packets received on the Ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0-TxPackets |
1.3.6.1.4.1.14125.3.4.82 |
The number of packets transmited on the Ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0-TxBytes |
1.3.6.1.4.1.14125.3.4.83 |
The number of bytes transmited on the Ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0-TxErrors |
1.3.6.1.4.1.14125.3.4.84 |
The number of error packets transmited on the Ethernet interface eth0. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V1-RxPackets |
1.3.6.1.4.1.14125.3.4.85 |
The number of packets received on the Ethernet vlan interface eth0 at profile 1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V1-RxBytes |
1.3.6.1.4.1.14125.3.4.86 |
The number of bytes received on the Ethernet vlan interface eth0 at profile 1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V1-RxErrors |
1.3.6.1.4.1.14125.3.4.87 |
The number of errors packets received on the Ethernet vlan interface eth0 at profile 1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V1-TxPackets |
1.3.6.1.4.1.14125.3.4.88 |
The number of packets transmited on the Ethernet vlan interface eth0 at profile 1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V1-TxBytes |
1.3.6.1.4.1.14125.3.4.89 |
The number of bytes transmited on the Ethernet vlan interface eth0 at profile 1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V1-TxErrors |
1.3.6.1.4.1.14125.3.4.90 |
The number of error packets transmited on the Ethernet vlan interface eth0 at profile 1. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V2-RxPackets |
1.3.6.1.4.1.14125.3.4.91 |
The number of packets received on the Ethernet vlan interface eth0 at profile 2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V2-RxBytes |
1.3.6.1.4.1.14125.3.4.92 |
The number of bytes received on the Ethernet vlan interface eth0 at profile 2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V2-RxErrors |
1.3.6.1.4.1.14125.3.4.93 |
The number of errors packets received on the Ethernet vlan interface eth0 at profile 2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V2-TxPackets |
1.3.6.1.4.1.14125.3.4.94 |
The number of packets transmited on the Ethernet vlan interface eth0 at profile 2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V2-TxBytes |
1.3.6.1.4.1.14125.3.4.95 |
The number of bytes transmited on the Ethernet vlan interface eth0 at profile 2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V2-TxErrors |
1.3.6.1.4.1.14125.3.4.96 |
The number of error packets transmited on the Ethernet vlan interface eth0 at profile 2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V3-RxPackets |
1.3.6.1.4.1.14125.3.4.97 |
The number of packets received on the Ethernet vlan interface eth0 at profile 3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V3-RxBytes |
1.3.6.1.4.1.14125.3.4.98 |
The number of bytes received on the Ethernet vlan interface eth0 at profile 3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V3-RxErrors |
1.3.6.1.4.1.14125.3.4.99 |
The number of errors packets received on the Ethernet vlan interface eth0 at profile 3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V3-TxPackets |
1.3.6.1.4.1.14125.3.4.100 |
The number of packets transmited on the Ethernet vlan interface eth0 at profile 3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V3-TxBytes |
1.3.6.1.4.1.14125.3.4.101 |
The number of bytes transmited on the Ethernet vlan interface eth0 at profile 3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V3-TxErrors |
1.3.6.1.4.1.14125.3.4.102 |
The number of error packets transmited on the Ethernet vlan interface eth0 at profile 3. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V4-RxPackets |
1.3.6.1.4.1.14125.3.4.103 |
The number of packets received on the Ethernet vlan interface eth0 at profile 4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V4-RxBytes |
1.3.6.1.4.1.14125.3.4.104 |
The number of bytes received on the Ethernet vlan interface eth0 at profile 4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V4-RxErrors |
1.3.6.1.4.1.14125.3.4.105 |
The number of errors packets received on the Ethernet vlan interface eth0 at profile 4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V4-TxPackets |
1.3.6.1.4.1.14125.3.4.106 |
The number of packets transmited on the Ethernet vlan interface eth0 at profile 4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V4-TxBytes |
1.3.6.1.4.1.14125.3.4.107 |
The number of bytes transmited on the Ethernet vlan interface eth0 at profile 4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
apEth0V4-TxErrors |
1.3.6.1.4.1.14125.3.4.108 |
The number of error packets transmited on the Ethernet vlan interface eth0 at profile 4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|