ELFIQ-MODULE-FOVE-MIB

File: ELFIQ-MODULE-FOVE-MIB.mib (7440 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
SNMPv2-MIB ELFIQ-INC-MIB ELFIQ-MODULE-COMMON-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 IpAddress NOTIFICATION-TYPE
TEXTUAL-CONVENTION DisplayString MacAddress
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
snmpTraps common commonConformance
commonComponent commonNotification

Defined Types

FoveIndex  
A unique value, greater than zero, for each fove component
TEXTUAL-CONVENTION    
  Integer32 0..5  

FoveEntry  
SEQUENCE    
  foveIntIndex FoveIndex
  foveIntUsed DisplayString
  foveIntType INTEGER
  foveLocalState INTEGER
  foveRemoteId Unsigned32
  foveRemoteSeq Unsigned32
  foveRemoteState INTEGER
  foveRemoteMgmtIP IpAddress
  foveRemoteIfName DisplayString
  foveRemoteLastL2FoMSec Unsigned32
  foveRemoteMac MacAddress
  foveVIPStatus INTEGER
  foveVIP IpAddress

Defined Values

foveInfo 1.3.6.1.4.1.19713.1.1.1.2
This is the standard standard component of the common failover elfiq module
MODULE-IDENTITY    

foveIntNumber 1.3.6.1.4.1.19713.1.1.1.2.1
The number of failover interface used and configured on your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..16  

foveTable 1.3.6.1.4.1.19713.1.1.1.2.2
This is a list of fove interfaces entries. The number of fove interfaces used is given by the value of foveIntNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FoveEntry

foveEntry 1.3.6.1.4.1.19713.1.1.1.2.2.1
An entry containing fove sub-component.
Status: current Access: not-accessible
OBJECT-TYPE    
  FoveEntry  

foveIntIndex 1.3.6.1.4.1.19713.1.1.1.2.2.1.1
The fove interface index
Status: current Access: read-only
OBJECT-TYPE    
  FoveIndex  

foveIntUsed 1.3.6.1.4.1.19713.1.1.1.2.2.1.2
This variable corresponds to the interface of this entry used in failover mode
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

foveIntType 1.3.6.1.4.1.19713.1.1.1.2.2.1.3
This variable describes the interface type of this entry used in failover mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER management(1), critical(2)  

foveLocalState 1.3.6.1.4.1.19713.1.1.1.2.2.1.4
The is the current state in failover mode of your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER negociation(1), master(2), slave(3), failure(4), dead(5), paused(6), managementfailure(7)  

foveRemoteId 1.3.6.1.4.1.19713.1.1.1.2.2.1.5
The is the remote identification of the peer configured in failover mode with your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

foveRemoteSeq 1.3.6.1.4.1.19713.1.1.1.2.2.1.6
This is the remote sequence number of the peer configured in failover mode with your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

foveRemoteState 1.3.6.1.4.1.19713.1.1.1.2.2.1.7
This is the remote state of the peer configured in failover mode with your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER negociation(1), master(2), slave(3), failure(4), dead(5), paused(6), managementfailure(7)  

foveRemoteMgmtIP 1.3.6.1.4.1.19713.1.1.1.2.2.1.8
This is the remote management ip address of the peer configured in failover mode with your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

foveRemoteIfName 1.3.6.1.4.1.19713.1.1.1.2.2.1.9
This variable corresponds to the remote interface name of the peer configured in failover mode with your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

foveRemoteLastL2FoMSec 1.3.6.1.4.1.19713.1.1.1.2.2.1.10
This is the delay in ms when your product received the last sequence number sent by the peer configured in failover mode with your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

foveRemoteMac 1.3.6.1.4.1.19713.1.1.1.2.2.1.11
This is the mac address of the peer interface configured in failover mode with your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

foveVIPStatus 1.3.6.1.4.1.19713.1.1.1.2.2.1.12
This is the virtual ip status of your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

foveVIP 1.3.6.1.4.1.19713.1.1.1.2.2.1.13
This is the virtual ip address of your elfiq product
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

foveNotification 1.3.6.1.4.1.19713.1.1.2.2
OBJECT IDENTIFIER    

foveStatusChanged 1.3.6.1.4.1.19713.1.1.2.2.1
This notification is sent every time the fove's product state changes ( master , slave , ...)
Status: current Access: read-only
NOTIFICATION-TYPE    

foveGroups 1.3.6.1.4.1.19713.2.1.2
OBJECT IDENTIFIER    

systInfoGroup 1.3.6.1.4.1.19713.2.1.2.1
A collection of objects providing fove information
Status: current Access: read-only
OBJECT-GROUP    

foveNotificationGroup 1.3.6.1.4.1.19713.2.1.2.2
A collection of objects notification corresponding to your products changes
Status: current Access: read-only
NOTIFICATION-GROUP