ED-5000-MIB
File:
ED-5000-MIB.mib (22111 bytes)
Imported modules
Imported symbols
Defined Types
Ed5000SysOperStatus |
|
INTEGER |
operational(1), redundant-failure(2), minor-failure(3), major-failure(4), not-operational(5) |
|
|
Ed5000SysState |
|
INTEGER |
online(1), coming-online(2), offline(3), going-offline(4) |
|
|
Ed5000FruCode |
|
INTEGER |
fru-bkplane(1), fru-ctp(2), fru-mpc(3), fru-cmm(4), fru-fan(5), fru-power(6), fru-panel(7), fru-gsm(8), fru-gls(9), fru-glx(10), fru-lsm(11), fru-gxx(12) |
|
|
Ed5000PortPhyState |
|
INTEGER |
psNotInstalled(1), psAvailable(2), psBlocked(3), psUnavailable(4), psLinkFailure(5), psLinkFailLOL(6), psIntDiags(7), psExtLoop(8), psPortFail(9), psSR(10), psLR(11) |
|
|
Ed5000FruEntry |
|
SEQUENCE |
|
|
|
|
ed5000FruCode |
Ed5000FruCode |
|
|
ed5000FruPosition |
Ed5000FruPosition |
|
|
ed5000FruStatus |
Ed5000FruStatus |
|
|
ed5000FruPartNumber |
DisplayString |
Size(64) |
|
ed5000FruSerialNumber |
DisplayString |
Size(64) |
|
ed5000FruPowerOnHours |
Counter |
|
|
ed5000FruTestDate |
DisplayString |
Size(64) |
Ed5000PortEntry |
|
SEQUENCE |
|
|
|
|
ed5000PortIndex |
Ed5000PortIndex |
|
|
ed5000PortPhyState |
Ed5000PortPhyState |
|
|
ed5000PortOpStatus |
Ed5000PortStatus |
|
|
ed5000PortAdmStatus |
Ed5000PortAdmStatus |
|
|
ed5000PortTxWords |
Counter |
|
|
ed5000PortRxWords |
Counter |
|
|
ed5000PortTxFrames |
Counter |
|
|
ed5000PortRxFrames |
Counter |
|
|
ed5000PortRxC2Frames |
Counter |
|
|
ed5000PortRxC3Frames |
Counter |
|
|
ed5000PortRxLCs |
Counter |
|
|
ed5000PortRxMcasts |
Counter |
|
|
ed5000PortTooManyRdys |
Counter |
|
|
ed5000PortNoTxCredits |
Counter |
|
|
ed5000PortRxEncFrs |
Counter |
|
|
ed5000PortRxCrcs |
Counter |
|
|
ed5000PortRxTruncs |
Counter |
|
|
ed5000PortRxTooLongs |
Counter |
|
|
ed5000PortRxBadEofs |
Counter |
|
|
ed5000PortRxBadOs |
Counter |
|
|
ed5000PortC3Discards |
Counter |
|
|
ed5000PortMcastTimedOuts |
Counter |
|
|
ed5000PortTxMcasts |
Counter |
|
|
ed5000PortTxThroughput |
Counter |
|
|
ed5000PortRxThroughput |
Counter |
|
Defined Values
mcData |
1.3.6.1.4.1.289 |
OBJECT IDENTIFIER |
|
|
|
commDev |
1.3.6.1.4.1.289.2 |
OBJECT IDENTIFIER |
|
|
|
fcSwitch |
1.3.6.1.4.1.289.2.1.1 |
OBJECT IDENTIFIER |
|
|
|
ed-5000 |
1.3.6.1.4.1.289.2.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
ed5000Sys |
1.3.6.1.4.1.289.2.1.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
ed5000Fru |
1.3.6.1.4.1.289.2.1.1.1.2 |
OBJECT IDENTIFIER |
|
|
|
ed5000Port |
1.3.6.1.4.1.289.2.1.1.1.3 |
OBJECT IDENTIFIER |
|
|
|
ed5000SysBootDate |
1.3.6.1.4.1.289.2.1.1.1.1.2 |
The date and time of the last IPL |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000SysTypeNum |
1.3.6.1.4.1.289.2.1.1.1.1.4 |
This object identifies ASCII type
number for the unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000SysModelNum |
1.3.6.1.4.1.289.2.1.1.1.1.5 |
This object identifies ASCII
model number for the unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000SysMfg |
1.3.6.1.4.1.289.2.1.1.1.1.6 |
This object identifies ASCII
manufacturer for the unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000SysPlantOfMfg |
1.3.6.1.4.1.289.2.1.1.1.1.7 |
This object identifies ASCII plant
of manufacturer for the unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000SysSeqNum |
1.3.6.1.4.1.289.2.1.1.1.1.8 |
This object identifies ASCII
sequence number for the unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000SysEcLevel |
1.3.6.1.4.1.289.2.1.1.1.1.9 |
This object identifies ASCII EC level
ID for the unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000SysOemSerialNum |
1.3.6.1.4.1.289.2.1.1.1.1.10 |
This object identifies ASCII OEM
serial number for the unit |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000SysOperStatus |
1.3.6.1.4.1.289.2.1.1.1.1.11 |
The current operational status
of the switch. The values are defined as follow:
operational (1), redundant-failure (2), minor-failure (3),
major-failure (4), not-operational (5). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ed5000SysOperStatus |
|
|
ed5000SysState |
1.3.6.1.4.1.289.2.1.1.1.1.12 |
If the edOperStatus of the switch is
operational, the switch will be in one of the four states:
online(1), coming-online(2), offline(3), and going-offline(4). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ed5000SysState |
|
|
ed5000SysAdmStatus |
1.3.6.1.4.1.289.2.1.1.1.1.13 |
The desired administrative status
of the switch. A management station may place the switch
in a desired state by setting this object accordingly.
The desired administrative status are online(1) and offline(2).
The online means setting the switch to be accessible by
an external Fibre Channel port, and offline means setting
the switch to be inaccessible. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
online(1), offline(2) |
|
ed5000FruTable |
1.3.6.1.4.1.289.2.1.1.1.2.1 |
A table that contains one entry for each module. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Ed5000FruEntry |
|
ed5000FruEntry |
1.3.6.1.4.1.289.2.1.1.1.2.1.1 |
An entry containing the service parameters of the module. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ed5000FruEntry |
|
|
ed5000FruCode |
1.3.6.1.4.1.289.2.1.1.1.2.1.1.1 |
Field Replaceable Unit.
A hardware component of the product that is replaceable
as an entire unit. Each module defined in this MIB has
a fixed FRU code. The values are defined as follow:
fru-none (0) , fru-bkplane (1), fru-ctp (2), fru-mpc (3),
fru-cmm (4), fru-fan (5), fru-power (6), fru-panel (7),
fru-gsm (8), fru-gls (9), fru-glx (10), fru-lsm (11), fru-gxx (12). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ed5000FruCode |
|
|
ed5000FruPosition |
1.3.6.1.4.1.289.2.1.1.1.2.1.1.2 |
This object identifies the position
of the module. Port cards start from 1 to 8.
All other cards start from 1 to 1 or 2. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ed5000FruPosition |
|
|
ed5000FruStatus |
1.3.6.1.4.1.289.2.1.1.1.2.1.1.3 |
This object identifies the operational
status of the module. The active(1)
state indicates that the current module is active.
The backup(2) state indicates that the back up module is used.
update-busy (3) state indicates that the module is
in the updating process. The failed(4) state indicates
that the current module is failed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ed5000FruStatus |
|
|
ed5000FruPartNumber |
1.3.6.1.4.1.289.2.1.1.1.2.1.1.4 |
This object identifies the part number of the module. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000FruSerialNumber |
1.3.6.1.4.1.289.2.1.1.1.2.1.1.5 |
This object identifies the serial number of the module. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000FruPowerOnHours |
1.3.6.1.4.1.289.2.1.1.1.2.1.1.6 |
This object indicates the number of the hours that the
FRU has been in operation. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000FruTestDate |
1.3.6.1.4.1.289.2.1.1.1.2.1.1.7 |
This object indicates final test date of the module. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(64) |
|
ed5000PortTable |
1.3.6.1.4.1.289.2.1.1.1.3.1 |
A table that contains one entry
for each switch port (stitch only). |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Ed5000PortEntry |
|
ed5000PortEntry |
1.3.6.1.4.1.289.2.1.1.1.3.1.1 |
An entry containing the information of the switch port. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ed5000PortEntry |
|
|
ed5000PortIndex |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.1 |
This object identifies the switch port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ed5000PortIndex |
|
|
ed5000PortOpStatus |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.3 |
This object identifies the operational
status of the port. The online state indicates that user frames
can be passed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Ed5000PortStatus |
|
|
ed5000PortAdmStatus |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.4 |
The desired state of the port.
A management station may place the port in a desired
state by setting this object accordingly. The testing(3)
state indicates that no user frames can be passed.
As the result of either explicit management action
or per configuration information accessible by the switch,
ed5000PortAdmStatus is then changed to either the online(1)
or testing(3) states, or remains in the offline state. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Ed5000PortAdmStatus |
|
|
ed5000PortTxWords |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.11 |
This object counts the number of
Fibre Channel words that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxWords |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.12 |
This object counts the number of
Fibre Channel words that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortTxFrames |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.13 |
This object counts the number of
(Fibre Channel) frames that the port has transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxFrames |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.14 |
This object counts the number of
(Fibre Channel) frames that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxC2Frames |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.15 |
This object counts the number of
Class 2 frames that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxC3Frames |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.16 |
This object counts the number of
Class 3 frames that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxLCs |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.17 |
This object counts the number of
Link Control frames that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxMcasts |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.18 |
This object counts the number of
Multicast frames that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortTooManyRdys |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.19 |
This object counts the number of
2.26 micro second intervals where the transmission of RDYs has
priority over the transmission of frame traffic.
(In 2.x releases and below, this counter gets incremented continuously
and therefore has no meaning. In release 3.0 and above, it is always 0.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortNoTxCredits |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.20 |
This object counts the amount of time
that frame transmission is blocked by a transmit credit of zero.
This is sampled once every 120 53.125 MHZ clocks,
and the counter is incremented by 1 if the condition is true. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxEncFrs |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.21 |
This object counts the number of
encoding error or disparity error inside or outside
frames received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxCrcs |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.22 |
This object counts the number of
CRC errors detected for frames received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxTruncs |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.23 |
This object counts the number of
truncated frames that the port has received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxBadEofs |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.25 |
This object counts the number of
received frames that have bad EOF delimiter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxBadOs |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.26 |
This object counts the number of
invalid Ordered Sets received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortC3Discards |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.27 |
This object counts the number of
Class 3 frames that the port has discarded. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortMcastTimedOuts |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.28 |
This object counts the number of
Multicast frames that has been timed out. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortTxMcasts |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.29 |
This object counts the number of
Multicast frames that has been transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortTxThroughput |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.30 |
This object presents the Bps transmission rate. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortRxThroughput |
1.3.6.1.4.1.289.2.1.1.1.3.1.1.31 |
This object presents the Bps reception rate. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ed5000PortScn |
1 |
An ed5000PortScn(1) is generated
whenever a Fc_Port changes its operational state.
For instance, the Fc_Port goes from on-line to offline. |
TRAP-TYPE |
|
|
|
ed5000FruScn |
2 |
An ed5000FruScn(2) is generated
whenever a FRU status changes its operational state. |
TRAP-TYPE |
|
|
|