EBN-MIB

File: EBN-MIB.mib (26959 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
APPN-MIB SNA-NAU-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
MODULE-COMPLIANCE OBJECT-GROUP DisplayString
TEXTUAL-CONVENTION SnaControlPointName snanauMIB

Defined Types

SnaNAUWildcardName  
Fully-qualified network NAU name. Entries take one of three forms: - Explicit entries do not contain the character '*'. - Partial Wildcard entries have the form 'ccc*', where 'ccc' represents one to sixteen characters in a legal SNA NAU Name. - A full wildcard consists of a single character '*'. Because the characters allowed in an SNA NAU name come from a restricted character set, these names are not subject to internationalization.
TEXTUAL-CONVENTION    
  DisplayString Size(1..17)  

EbnDirEntry  
SEQUENCE    
  ebnDirLuName SnaNAUWildcardName
  ebnDirSubnetAffiliation INTEGER

EbnIsRscvEntry  
SEQUENCE    
  ebnIsRscvCpName SnaControlPointName
  ebnIsRscvPcid OCTET STRING
  ebnIsRscvDestinationRoute OCTET STRING
  ebnIsRscvDestinationCos DisplayString

EbnCosMapEntry  
SEQUENCE    
  ebnCosMapCpName SnaNAUWildcardName
  ebnCosMapNonNativeCos DisplayString
  ebnCosMapNativeCos DisplayString

EbnSubnetSearchEntry  
SEQUENCE    
  ebnSubnetSearchLuName SnaNAUWildcardName
  ebnSubnetSearchDynamics INTEGER
  ebnSubnetSearchOrdering INTEGER

EbnSearchEntry  
SEQUENCE    
  ebnSearchLuName SnaNAUWildcardName
  ebnSearchIndex Unsigned32
  ebnSearchCpName DisplayString
  ebnSearchSNVC Unsigned32

HbnIsInEntry  
SEQUENCE    
  hbnIsInFqCpName SnaControlPointName
  hbnIsInPcid OCTET STRING
  hbnIsInRtpNceId OCTET STRING
  hbnIsInRtpTcid OCTET STRING

Defined Values

ebnMIB 1.3.6.1.2.1.34.7
The MIB Module for Extended Border Node
MODULE-IDENTITY    

ebnObjects 1.3.6.1.2.1.34.7.1
OBJECT IDENTIFIER    

ebnDir 1.3.6.1.2.1.34.7.1.1
OBJECT IDENTIFIER    

ebnDirTable 1.3.6.1.2.1.34.7.1.1.1
The EBN Directory Table. This table is an extension to the APPN MIB's appnDirTable. Entries in this table are in one-to-one correspondence with entries in the appnDirTable, with corresponding entries having identical values for their respective indexes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EbnDirEntry

ebnDirEntry 1.3.6.1.2.1.34.7.1.1.1.1
Entry in the EBN Directory Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EbnDirEntry  

ebnDirLuName 1.3.6.1.2.1.34.7.1.1.1.1.1
Fully qualified network LU name in the domain of a serving network node. If this object has the same value as the appnDirLuName object in the APPN MIB, then the two objects are referring to the same LU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnaNAUWildcardName  

ebnDirSubnetAffiliation 1.3.6.1.2.1.34.7.1.1.1.1.2
Specifies the subnetwork affiliation of the LU: - native(1) : The LU is in the native APPN subnetwork. - nonNative(2) : The LU is in a non-native APPN subnetwork. - subarea(3) : The LU is in a subarea network.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER native(1), nonNative(2), subarea(3)  

ebnIsRscv 1.3.6.1.2.1.34.7.1.2
OBJECT IDENTIFIER    

ebnIsRscvTable 1.3.6.1.2.1.34.7.1.2.1
The EBN Intermediate Session RSCV table. This table is an extension to the appnIsInTable. It contains the RSCV and COS used in the direction of the BIND destination. There is an entry in this table for each session that traverses an ISTG when it enters or leaves this EBN, with corresponding entries having identical values for their respective indexes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EbnIsRscvEntry

ebnIsRscvEntry 1.3.6.1.2.1.34.7.1.2.1.1
Entry in ebnIsRscvTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EbnIsRscvEntry  

ebnIsRscvCpName 1.3.6.1.2.1.34.7.1.2.1.1.1
The network-qualified control point name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the LEN node at which the origin LU is located. For DLUR resources it is the name of the owning SSCP. If this object has the same value as the appnIsInFqCpName object in the APPN MIB, then the two objects are referring to the same APPN control point.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnaControlPointName  

ebnIsRscvPcid 1.3.6.1.2.1.34.7.1.2.1.1.2
The procedure correlation identifier (PCID) of a session. It is an 8-octet value. If this object has the same value as the appnIsInPcid object in the APPN MIB, and if the corresponding ebnIsRscvCpName object has the same value as the corresponding appnIsInFqCpName object, then the entries indexed by these objects are referring to the same session.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(8)  

ebnIsRscvDestinationRoute 1.3.6.1.2.1.34.7.1.2.1.1.3
The route selection control vector (RSCV x'2B') used in the direction towards the SLU.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

ebnIsRscvDestinationCos 1.3.6.1.2.1.34.7.1.2.1.1.4
The Class of Service (COS) name used in the direction towards the SLU. Because the characters allowed in an SNA COS name come from a restricted character set, these names are not subject to internationalization.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

ebnDirConfig 1.3.6.1.2.1.34.7.1.3
OBJECT IDENTIFIER    

ebnSearchCacheTime 1.3.6.1.2.1.34.7.1.3.1
The amount of time in minutes an extended border node will retain information about a multi-subnetwork search, once that that search terminates. A value 0 indicates that the EBN has no defined limit, and the number of entries is bounded only by memory.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ebnMaxSearchCache 1.3.6.1.2.1.34.7.1.3.2
The maximum number of multi-subnet entries to be cached. The value 0 indicates that the local node has no defined limit, and the number of entries is bounded only by memory.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ebnDefaultSubnetVisitCount 1.3.6.1.2.1.34.7.1.3.3
The default maximum number of subnetworks a LOCATE search procedure may traverse.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ebnCOS 1.3.6.1.2.1.34.7.1.4
OBJECT IDENTIFIER    

ebnCosMapTable 1.3.6.1.2.1.34.7.1.4.1
The EBN COS Mapping Table. This table specifies how non- native COS values are mapped to COS values defined in the native subnetwork. Note: The COS mappings that an EBN performs are determined by multiple factors, one of which is a set of user-defined initial mappings. This table returns the COS mappings that the EBN is actually performing at the time it is queried, rather than the user-defined initial ones.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EbnCosMapEntry

ebnCosMapEntry 1.3.6.1.2.1.34.7.1.4.1.1
An entry in the EBN COS Mapping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EbnCosMapEntry  

ebnCosMapCpName 1.3.6.1.2.1.34.7.1.4.1.1.1
Fully qualified network CP name for which the COS mapping applies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnaNAUWildcardName  

ebnCosMapNonNativeCos 1.3.6.1.2.1.34.7.1.4.1.1.2
This object contains one of the following values: - An 8-character COS name used in a non-native subnetwork. - The single character '*', identifying the entry with the default native COS for a non-native CP name. This entry is used when there is no entry in the table for a non-native CP name / non-native COS pair. Because the characters allowed in an SNA COS name come from a restricted character set, these names are not subject to internationalization.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..8)  

ebnCosMapNativeCos 1.3.6.1.2.1.34.7.1.4.1.1.3
An 8-byte name for the class-of-service, as known in the native subnetwork. Because the characters allowed in an SNA COS name come from a restricted character set, these names are not subject to internationalization.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..8)  

ebnSubnetRoutingList 1.3.6.1.2.1.34.7.1.5
OBJECT IDENTIFIER    

ebnSubnetSearchTable 1.3.6.1.2.1.34.7.1.5.1
This table contains one entry for each fully qualified LU name for which an associated subnet routing list has been defined. An entry in this table contains general characteristics of the subnet search routing list for an LU name. The routing list itself is represented by a set of contiguous entries in the ebnSearchTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EbnSubnetSearchEntry

ebnSubnetSearchEntry 1.3.6.1.2.1.34.7.1.5.1.1
An entry for the ebnSubnetSearchTable. The entry represents the configured parameters the EBN uses when it is determining how to search for the LU identified by the ebnSubnetSearchLuName object.
Status: current Access: not-accessible
OBJECT-TYPE    
  EbnSubnetSearchEntry  

ebnSubnetSearchLuName 1.3.6.1.2.1.34.7.1.5.1.1.1
Fully qualified network LU name.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnaNAUWildcardName  

ebnSubnetSearchDynamics 1.3.6.1.2.1.34.7.1.5.1.1.2
Indicates whether an EBN may add dynamic entries to a subnetwork routing list. none(1) means no entries may be added to the subnetwork routing list. limited(2) means only likely entries may be added to the subnetwork routing list. full(3) means all native extended border nodes and adjacent, non-native EBNs and NNs will be added to the subnetwork routing list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), limited(2), full(3)  

ebnSubnetSearchOrdering 1.3.6.1.2.1.34.7.1.5.1.1.3
Indicates whether an EBN may reorder a subnetwork routing list so that entries which are more likely to be successful move to the top of the subnetwork routing list and entries which are more likely to be unsuccessful move to the bottom of the list. The following values are defined: - priority(1): Entries may be reordered. - defined(2): Entries must not be reordered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER priority(1), defined(2)  

ebnSearchTable 1.3.6.1.2.1.34.7.1.5.2
This table indicates the CONFIGURED list of control points to which the EBN sends Locate searches for a given fully qualified LU name. Each entry in the table indicates one control point that should be included in a multi-subnet search for a particular LU name.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EbnSearchEntry

ebnSearchEntry 1.3.6.1.2.1.34.7.1.5.2.1
An entry in the ebnSearchTable. An entry can exist in this table only if an entry exists in the ebnSubnetSearchTable with an ebnSubnetSearchLuName value matching this entry's ebnSearchLuName. For a given ebnSearchLuName value, the ordering of entries provides by the ebnSearchIndex values corresponds to the order in which the control points to be searched appear in the CONFIGURED search list for the ebnSearchLuName.
Status: current Access: not-accessible
OBJECT-TYPE    
  EbnSearchEntry  

ebnSearchLuName 1.3.6.1.2.1.34.7.1.5.2.1.1
Fully qualified network LU name. If this object has the same value as the ebnSubnetSearchLuName object, then the two objects are referring to the same LU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnaNAUWildcardName  

ebnSearchIndex 1.3.6.1.2.1.34.7.1.5.2.1.2
Secondary index enumerating the CONFIGURED order in which a search is forwarded to CPs for a particular LU name. The order for an actual search is determined dynamically by the EBN, based on this configured information and on other factors, including whether search dynamics and search ordering are enabled. Information on these last two settings is available in, respectively, the ebnSubnetSearchDynamics and ebnSubnetSearch ordering objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

ebnSearchCpName 1.3.6.1.2.1.34.7.1.5.2.1.3
This object specifies the CP(s) to which a search should be forwarded. It either follows the SnaNAUWildcardName textual convention or takes one of the following special formats: '*' indicates that all native EBNs and all adjacent non- native EBNs and NNs may be added to the routing list dynamically, '*SELF' indicates that the EBN should search itself and its native subnetwork at this time during the cross-subnet search, '*EBNS' indicates all native EBNs. Because the characters allowed in a CP name come from a restricted character set, and because the three formats listed here use no special characters, this object is not subject to internationalization.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..17)  

ebnSearchSNVC 1.3.6.1.2.1.34.7.1.5.2.1.4
The maximum number of subnets a Locate search procedure may traverse.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hbn 1.3.6.1.2.1.34.7.1.6
OBJECT IDENTIFIER    

hbnIsInTable 1.3.6.1.2.1.34.7.1.6.1
The HBN Intermediate Session table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HbnIsInEntry

hbnIsInEntry 1.3.6.1.2.1.34.7.1.6.1.1
Entry of the HBN Intermediate Session Table. An entry exists in this table for every intermediate session being routed between back-to-back RTP connections in the HBN. When an entry for a session exists in this table, the NceIds and Tcids for the back-to-back RTP connections are made available in the following four objects: RTP connection in the direction of the PLU: - NceId: appnIsInRtpNceId (in the APPN MIB) - Tcid: appnIsinRtpTcid (in the APPN MIB). RTP connection in the direction of the SLU: - NceId: hbnIsInRtpNceId (in this table) - Tcid: hbnIsInRtpTcid (in this table).
Status: current Access: not-accessible
OBJECT-TYPE    
  HbnIsInEntry  

hbnIsInFqCpName 1.3.6.1.2.1.34.7.1.6.1.1.1
The network-qualified control point name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either the CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the LEN node at which the origin LU is located. If this object has the same value as the appnIsInFqCpName object in the APPN MIB, then the two objects are referring to the same APPN control point.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnaControlPointName  

hbnIsInPcid 1.3.6.1.2.1.34.7.1.6.1.1.2
The procedure correlation identifier (PCID) of a session. It is an 8-octet value. If this object has the same value as the appnIsInPcid object in the APPN MIB, and if the corresponding hbnIsInFqCpName object has the same value as the corresponding appnIsInFqCpName object, then the entries indexed by these objects are referring to the same session.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(8)  

hbnIsInRtpNceId 1.3.6.1.2.1.34.7.1.6.1.1.3
The HPR local Network Connection Endpoint of the session in the direction of the SLU.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

hbnIsInRtpTcid 1.3.6.1.2.1.34.7.1.6.1.1.4
The RTP connection local TCID of the session in the direction of the SLU.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

ebnConformance 1.3.6.1.2.1.34.7.2
OBJECT IDENTIFIER    

ebnCompliances 1.3.6.1.2.1.34.7.2.1
OBJECT IDENTIFIER    

ebnGroups 1.3.6.1.2.1.34.7.2.2
OBJECT IDENTIFIER    

ebnCompliance 1.3.6.1.2.1.34.7.2.1.1
The compliance statement for the SNMPv2 entities which implement the ebnMIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

ebnDirectoryGroup 1.3.6.1.2.1.34.7.2.2.1
The EBN-related directory objects.
Status: current Access: read-only
OBJECT-GROUP    

ebnIsRscvGroup 1.3.6.1.2.1.34.7.2.2.2
Two objects representing RSCV and class of service information saved by an EBN.
Status: current Access: read-only
OBJECT-GROUP    

ebnDirectoryConfigGroup 1.3.6.1.2.1.34.7.2.2.3
The EBN Directory Configuration Group.
Status: current Access: read-only
OBJECT-GROUP    

ebnCosMappingGroup 1.3.6.1.2.1.34.7.2.2.4
The EBN COS Mapping Group.
Status: current Access: read-only
OBJECT-GROUP    

ebnSubnetRoutingListGroup 1.3.6.1.2.1.34.7.2.2.5
The Subnet Routing List Group.
Status: current Access: read-only
OBJECT-GROUP    

hbnIsInGroup 1.3.6.1.2.1.34.7.2.2.6
The HBN-related Intermediate Session Objects.
Status: current Access: read-only
OBJECT-GROUP