EATON-EPDU-PU-SW-MIB
File:
EATON-EPDU-PU-SW-MIB.mib (116287 bytes)
Imported modules
Imported symbols
Defined Values
pulizzi |
1.3.6.1.4.1.20677 |
The MIB module for Eaton Switched ePDUs (Enclosed Power Distribution Units.) |
MODULE-IDENTITY |
|
|
|
ipv3600 |
1.3.6.1.4.1.20677.2 |
OBJECT IDENTIFIER |
|
|
|
unitConfig |
1.3.6.1.4.1.20677.2.1 |
OBJECT IDENTIFIER |
|
|
|
outletMngt |
1.3.6.1.4.1.20677.2.6 |
OBJECT IDENTIFIER |
|
|
|
outlet1 |
1.3.6.1.4.1.20677.2.6.1.1 |
OBJECT IDENTIFIER |
|
|
|
outlet2 |
1.3.6.1.4.1.20677.2.6.1.2 |
OBJECT IDENTIFIER |
|
|
|
outlet3 |
1.3.6.1.4.1.20677.2.6.1.3 |
OBJECT IDENTIFIER |
|
|
|
outlet4 |
1.3.6.1.4.1.20677.2.6.1.4 |
OBJECT IDENTIFIER |
|
|
|
outlet5 |
1.3.6.1.4.1.20677.2.6.1.5 |
OBJECT IDENTIFIER |
|
|
|
outlet6 |
1.3.6.1.4.1.20677.2.6.1.6 |
OBJECT IDENTIFIER |
|
|
|
outlet7 |
1.3.6.1.4.1.20677.2.6.1.7 |
OBJECT IDENTIFIER |
|
|
|
outlet8 |
1.3.6.1.4.1.20677.2.6.1.8 |
OBJECT IDENTIFIER |
|
|
|
outlet9 |
1.3.6.1.4.1.20677.2.6.1.9 |
OBJECT IDENTIFIER |
|
|
|
outlet10 |
1.3.6.1.4.1.20677.2.6.1.10 |
OBJECT IDENTIFIER |
|
|
|
outlet11 |
1.3.6.1.4.1.20677.2.6.1.11 |
OBJECT IDENTIFIER |
|
|
|
outlet12 |
1.3.6.1.4.1.20677.2.6.1.12 |
OBJECT IDENTIFIER |
|
|
|
outlet13 |
1.3.6.1.4.1.20677.2.6.1.13 |
OBJECT IDENTIFIER |
|
|
|
outlet14 |
1.3.6.1.4.1.20677.2.6.1.14 |
OBJECT IDENTIFIER |
|
|
|
outlet15 |
1.3.6.1.4.1.20677.2.6.1.15 |
OBJECT IDENTIFIER |
|
|
|
outlet16 |
1.3.6.1.4.1.20677.2.6.1.16 |
OBJECT IDENTIFIER |
|
|
|
outlet17 |
1.3.6.1.4.1.20677.2.6.1.17 |
OBJECT IDENTIFIER |
|
|
|
outlet18 |
1.3.6.1.4.1.20677.2.6.1.18 |
OBJECT IDENTIFIER |
|
|
|
outlet19 |
1.3.6.1.4.1.20677.2.6.1.19 |
OBJECT IDENTIFIER |
|
|
|
outlet20 |
1.3.6.1.4.1.20677.2.6.1.20 |
OBJECT IDENTIFIER |
|
|
|
outlet21 |
1.3.6.1.4.1.20677.2.6.1.21 |
OBJECT IDENTIFIER |
|
|
|
outlet22 |
1.3.6.1.4.1.20677.2.6.1.22 |
OBJECT IDENTIFIER |
|
|
|
outlet23 |
1.3.6.1.4.1.20677.2.6.1.23 |
OBJECT IDENTIFIER |
|
|
|
outlet24 |
1.3.6.1.4.1.20677.2.6.1.24 |
OBJECT IDENTIFIER |
|
|
|
outlet25 |
1.3.6.1.4.1.20677.2.6.1.25 |
OBJECT IDENTIFIER |
|
|
|
outlet26 |
1.3.6.1.4.1.20677.2.6.1.26 |
OBJECT IDENTIFIER |
|
|
|
outlet27 |
1.3.6.1.4.1.20677.2.6.1.27 |
OBJECT IDENTIFIER |
|
|
|
outlet28 |
1.3.6.1.4.1.20677.2.6.1.28 |
OBJECT IDENTIFIER |
|
|
|
outlet29 |
1.3.6.1.4.1.20677.2.6.1.29 |
OBJECT IDENTIFIER |
|
|
|
outlet30 |
1.3.6.1.4.1.20677.2.6.1.30 |
OBJECT IDENTIFIER |
|
|
|
outlet31 |
1.3.6.1.4.1.20677.2.6.1.31 |
OBJECT IDENTIFIER |
|
|
|
outlet32 |
1.3.6.1.4.1.20677.2.6.1.32 |
OBJECT IDENTIFIER |
|
|
|
outlet33 |
1.3.6.1.4.1.20677.2.6.1.33 |
OBJECT IDENTIFIER |
|
|
|
outlet34 |
1.3.6.1.4.1.20677.2.6.1.34 |
OBJECT IDENTIFIER |
|
|
|
outlet35 |
1.3.6.1.4.1.20677.2.6.1.35 |
OBJECT IDENTIFIER |
|
|
|
outlet36 |
1.3.6.1.4.1.20677.2.6.1.36 |
OBJECT IDENTIFIER |
|
|
|
snmpTraps |
1.3.6.1.4.1.20677.2.7.8 |
OBJECT IDENTIFIER |
|
|
|
tempSensor1 |
1.3.6.1.4.1.20677.2.8.1.1 |
OBJECT IDENTIFIER |
|
|
|
tempSensor2 |
1.3.6.1.4.1.20677.2.8.1.2 |
OBJECT IDENTIFIER |
|
|
|
humSensor1 |
1.3.6.1.4.1.20677.2.8.2.1 |
OBJECT IDENTIFIER |
|
|
|
total |
1.3.6.1.4.1.20677.2.8.6.4 |
OBJECT IDENTIFIER |
|
|
|
events |
1.3.6.1.4.1.20677.2.9 |
OBJECT IDENTIFIER |
|
|
|
eventInfo |
1.3.6.1.4.1.20677.2.10 |
OBJECT IDENTIFIER |
|
|
|
groups |
1.3.6.1.4.1.20677.2.25.5 |
OBJECT IDENTIFIER |
|
|
|
unitName |
1.3.6.1.4.1.20677.2.1.1 |
Descriptive name of unit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
strappingId |
1.3.6.1.4.1.20677.2.1.2 |
ID of unit when connected in a strapping configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..23 |
|
unitTime |
1.3.6.1.4.1.20677.2.1.3 |
Time hh:mm |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..5) |
|
unitDate |
1.3.6.1.4.1.20677.2.1.4 |
Today's date mm/dd/yyyy |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..10) |
|
unitDayOfWeek |
1.3.6.1.4.1.20677.2.1.5 |
Today's day of week. This is important when scheduling logs to be sent on a particular week day. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sunday(1), monday(2), tuesday(3), wednesday(4), thursday(5), friday(6), saturday(7) |
|
vaLoggingInterval |
1.3.6.1.4.1.20677.2.1.6 |
Interval for updating the VA log. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), fiveminutes(1), fifteenminutes(2), hourly(3) |
|
loginTimeout |
1.3.6.1.4.1.20677.2.1.7 |
Timeout (in seconds) for serial, telnet, and web interfaces. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
invertDisplay |
1.3.6.1.4.1.20677.2.1.8 |
Select the orientation of the local 7-segment display. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(0), inverted(1) |
|
fahrenheitOrCelsius |
1.3.6.1.4.1.20677.2.1.9 |
Units for temperature readings. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
fahrenheit(0), celsius(1) |
|
unitIPAddress |
1.3.6.1.4.1.20677.2.2.1 |
Network IP address |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
subnetMask |
1.3.6.1.4.1.20677.2.2.2 |
Network subnet mask |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
defaultGateway |
1.3.6.1.4.1.20677.2.2.3 |
Network default gateway |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
webPort |
1.3.6.1.4.1.20677.2.2.4 |
Port number for non-secure (http) web interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webEnabled |
1.3.6.1.4.1.20677.2.2.5 |
Enables or disables the web interface (both secure and non-secure). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
macAddress |
1.3.6.1.4.1.20677.2.2.6 |
Hardware network address |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..17) |
|
enablePing |
1.3.6.1.4.1.20677.2.2.7 |
Enables ping watchdog feature. If enabled, the IP address for each outlet (if non-zero) will be pinged
periodically; the outlet will be rebooted if there is no ping response. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
pingInterval |
1.3.6.1.4.1.20677.2.2.8 |
Interval (in minutes) beween attempts to ping the IP address corresponding to an outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..999 |
|
mailServerIPAddress |
1.3.6.1.4.1.20677.2.3.1 |
IP address of mail server for sending logs and alerts. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
sendLogFrom |
1.3.6.1.4.1.20677.2.3.2 |
Email address (x@y.z format) to be used as the from address for logs and alerts. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
sendLogToUser1Address |
1.3.6.1.4.1.20677.2.3.3 |
Email address to which to send unit logs. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
sendLogToUser2Address |
1.3.6.1.4.1.20677.2.3.4 |
Second email address to which to send unit logs. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
sendAlertsToUser1Address |
1.3.6.1.4.1.20677.2.3.5 |
Email address to which to send unit alerts. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
sendAlertsToUser2Address |
1.3.6.1.4.1.20677.2.3.6 |
Second email address to which to send unit alerts. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
sendLogFrequency |
1.3.6.1.4.1.20677.2.3.7 |
Frequency with which to send logs via email. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
weeklyOnSunday(1), weeklyOnMonday(2), weeklyOnTuesday(3), weeklyOnWednesday(4), weeklyOnThursday(5), weeklyOnFriday(6), weeklyOnSaturday(7), daily(8), whenFull(9), never(10) |
|
sendLogTime |
1.3.6.1.4.1.20677.2.3.8 |
Time of day to send logs via email. Not applicable if sendLogFrequency is set to whenFull or never. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
userLogInLogOut |
1.3.6.1.4.1.20677.2.3.9 |
Enabled setting to log or send an alert when a user logs in or logs out of the serial, telnet, or web interfaces. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), sendToLog(2), sendAlert(3), sendtoLogAndAlert(4) |
|
userLogInLogOutFailed |
1.3.6.1.4.1.20677.2.3.10 |
Enabled setting to log or send an alert when a user attempts to log in but fails because of a username or password mismatch. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), sendToLog(2), sendAlert(3), sendtoLogAndAlert(4) |
|
outletActivity |
1.3.6.1.4.1.20677.2.3.11 |
Enabled setting to log or send an alert each time an outlet changes state. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), sendToLog(2), sendAlert(3), sendtoLogAndAlert(4) |
|
systemOnOff |
1.3.6.1.4.1.20677.2.3.12 |
Enabled setting to log or send an alert each time the unit powers up. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), sendToLog(2), sendAlert(3), sendtoLogAndAlert(4) |
|
outletSection1Alert |
1.3.6.1.4.1.20677.2.3.13 |
Enabled setting to send an email alert when section 1 thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), sendAlert(1) |
|
outletSection2Alert |
1.3.6.1.4.1.20677.2.3.14 |
Enabled setting to send an email alert when section 2 thresholds are brached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), sendAlert(1) |
|
outletSection3Alert |
1.3.6.1.4.1.20677.2.3.15 |
Enabled setting to send an email alert when section 3 thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), sendAlert(1) |
|
tempSensor1Alert |
1.3.6.1.4.1.20677.2.3.16 |
Enabled setting to send an email alert when temperature sensor 1 thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), sendAlert(1) |
|
tempSensor2Alert |
1.3.6.1.4.1.20677.2.3.17 |
Enabled setting to send an email alert when temperature sensor 2 thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), sendAlert(1) |
|
humSensor1Alert |
1.3.6.1.4.1.20677.2.3.18 |
Enabled setting to send an email alert when humidity sensor thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), sendAlert(1) |
|
baudRate |
1.3.6.1.4.1.20677.2.4.1 |
Serial baud rate, does not take effect unless unit is soft-rebooted. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
baud9600(0), baud19200(1), baud38400(2) |
|
telnetPort |
1.3.6.1.4.1.20677.2.5.1 |
Telnet interface port, default is 23. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
telnetEnabled |
1.3.6.1.4.1.20677.2.5.2 |
Enabled setting for the telnet interface. This can be disabled for security. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
outlet1Name |
1.3.6.1.4.1.20677.2.6.1.1.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet1Link |
1.3.6.1.4.1.20677.2.6.1.1.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet1SequenceTime |
1.3.6.1.4.1.20677.2.6.1.1.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet1RebootTime |
1.3.6.1.4.1.20677.2.6.1.1.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet2Name |
1.3.6.1.4.1.20677.2.6.1.2.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet2Link |
1.3.6.1.4.1.20677.2.6.1.2.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet2SequenceTime |
1.3.6.1.4.1.20677.2.6.1.2.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet2RebootTime |
1.3.6.1.4.1.20677.2.6.1.2.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet3Name |
1.3.6.1.4.1.20677.2.6.1.3.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet3Link |
1.3.6.1.4.1.20677.2.6.1.3.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet3SequenceTime |
1.3.6.1.4.1.20677.2.6.1.3.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet3RebootTime |
1.3.6.1.4.1.20677.2.6.1.3.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet4Name |
1.3.6.1.4.1.20677.2.6.1.4.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet4Link |
1.3.6.1.4.1.20677.2.6.1.4.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet4SequenceTime |
1.3.6.1.4.1.20677.2.6.1.4.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet4RebootTime |
1.3.6.1.4.1.20677.2.6.1.4.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet5Name |
1.3.6.1.4.1.20677.2.6.1.5.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet5Link |
1.3.6.1.4.1.20677.2.6.1.5.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet5SequenceTime |
1.3.6.1.4.1.20677.2.6.1.5.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet5RebootTime |
1.3.6.1.4.1.20677.2.6.1.5.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet6Name |
1.3.6.1.4.1.20677.2.6.1.6.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet6Link |
1.3.6.1.4.1.20677.2.6.1.6.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet6SequenceTime |
1.3.6.1.4.1.20677.2.6.1.6.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet6RebootTime |
1.3.6.1.4.1.20677.2.6.1.6.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet7Name |
1.3.6.1.4.1.20677.2.6.1.7.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet7Link |
1.3.6.1.4.1.20677.2.6.1.7.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet7SequenceTime |
1.3.6.1.4.1.20677.2.6.1.7.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet7RebootTime |
1.3.6.1.4.1.20677.2.6.1.7.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet8Name |
1.3.6.1.4.1.20677.2.6.1.8.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet8Link |
1.3.6.1.4.1.20677.2.6.1.8.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet8SequenceTime |
1.3.6.1.4.1.20677.2.6.1.8.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet8RebootTime |
1.3.6.1.4.1.20677.2.6.1.8.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet9Name |
1.3.6.1.4.1.20677.2.6.1.9.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet9Link |
1.3.6.1.4.1.20677.2.6.1.9.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet9SequenceTime |
1.3.6.1.4.1.20677.2.6.1.9.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet9RebootTime |
1.3.6.1.4.1.20677.2.6.1.9.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet10Name |
1.3.6.1.4.1.20677.2.6.1.10.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet10Link |
1.3.6.1.4.1.20677.2.6.1.10.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet10SequenceTime |
1.3.6.1.4.1.20677.2.6.1.10.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet10RebootTime |
1.3.6.1.4.1.20677.2.6.1.10.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet11Name |
1.3.6.1.4.1.20677.2.6.1.11.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet11Link |
1.3.6.1.4.1.20677.2.6.1.11.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet11SequenceTime |
1.3.6.1.4.1.20677.2.6.1.11.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet11RebootTime |
1.3.6.1.4.1.20677.2.6.1.11.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet12Name |
1.3.6.1.4.1.20677.2.6.1.12.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet12Link |
1.3.6.1.4.1.20677.2.6.1.12.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet12SequenceTime |
1.3.6.1.4.1.20677.2.6.1.12.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet12RebootTime |
1.3.6.1.4.1.20677.2.6.1.12.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet13Name |
1.3.6.1.4.1.20677.2.6.1.13.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet13Link |
1.3.6.1.4.1.20677.2.6.1.13.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet13SequenceTime |
1.3.6.1.4.1.20677.2.6.1.13.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet13RebootTime |
1.3.6.1.4.1.20677.2.6.1.13.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet14Name |
1.3.6.1.4.1.20677.2.6.1.14.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet14Link |
1.3.6.1.4.1.20677.2.6.1.14.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet14SequenceTime |
1.3.6.1.4.1.20677.2.6.1.14.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet14RebootTime |
1.3.6.1.4.1.20677.2.6.1.14.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet15Name |
1.3.6.1.4.1.20677.2.6.1.15.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet15Link |
1.3.6.1.4.1.20677.2.6.1.15.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet15SequenceTime |
1.3.6.1.4.1.20677.2.6.1.15.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet15RebootTime |
1.3.6.1.4.1.20677.2.6.1.15.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet16Name |
1.3.6.1.4.1.20677.2.6.1.16.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet16Link |
1.3.6.1.4.1.20677.2.6.1.16.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet16SequenceTime |
1.3.6.1.4.1.20677.2.6.1.16.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet16RebootTime |
1.3.6.1.4.1.20677.2.6.1.16.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet17Name |
1.3.6.1.4.1.20677.2.6.1.17.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet17Link |
1.3.6.1.4.1.20677.2.6.1.17.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet17SequenceTime |
1.3.6.1.4.1.20677.2.6.1.17.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet17RebootTime |
1.3.6.1.4.1.20677.2.6.1.17.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet18Name |
1.3.6.1.4.1.20677.2.6.1.18.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet18Link |
1.3.6.1.4.1.20677.2.6.1.18.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet18SequenceTime |
1.3.6.1.4.1.20677.2.6.1.18.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet18RebootTime |
1.3.6.1.4.1.20677.2.6.1.18.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet19Name |
1.3.6.1.4.1.20677.2.6.1.19.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet19Link |
1.3.6.1.4.1.20677.2.6.1.19.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet19SequenceTime |
1.3.6.1.4.1.20677.2.6.1.19.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet19RebootTime |
1.3.6.1.4.1.20677.2.6.1.19.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet20Name |
1.3.6.1.4.1.20677.2.6.1.20.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet20Link |
1.3.6.1.4.1.20677.2.6.1.20.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet20SequenceTime |
1.3.6.1.4.1.20677.2.6.1.20.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet20RebootTime |
1.3.6.1.4.1.20677.2.6.1.20.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet21Name |
1.3.6.1.4.1.20677.2.6.1.21.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet21Link |
1.3.6.1.4.1.20677.2.6.1.21.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet21SequenceTime |
1.3.6.1.4.1.20677.2.6.1.21.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet21RebootTime |
1.3.6.1.4.1.20677.2.6.1.21.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet22Name |
1.3.6.1.4.1.20677.2.6.1.22.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet22Link |
1.3.6.1.4.1.20677.2.6.1.22.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet22SequenceTime |
1.3.6.1.4.1.20677.2.6.1.22.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet22RebootTime |
1.3.6.1.4.1.20677.2.6.1.22.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet23Name |
1.3.6.1.4.1.20677.2.6.1.23.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet23Link |
1.3.6.1.4.1.20677.2.6.1.23.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet23SequenceTime |
1.3.6.1.4.1.20677.2.6.1.23.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet23RebootTime |
1.3.6.1.4.1.20677.2.6.1.23.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet24Name |
1.3.6.1.4.1.20677.2.6.1.24.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet24Link |
1.3.6.1.4.1.20677.2.6.1.24.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet24SequenceTime |
1.3.6.1.4.1.20677.2.6.1.24.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet24RebootTime |
1.3.6.1.4.1.20677.2.6.1.24.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet25Name |
1.3.6.1.4.1.20677.2.6.1.25.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet25Link |
1.3.6.1.4.1.20677.2.6.1.25.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet25SequenceTime |
1.3.6.1.4.1.20677.2.6.1.25.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet25RebootTime |
1.3.6.1.4.1.20677.2.6.1.25.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet26Name |
1.3.6.1.4.1.20677.2.6.1.26.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet26Link |
1.3.6.1.4.1.20677.2.6.1.26.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet26SequenceTime |
1.3.6.1.4.1.20677.2.6.1.26.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet26RebootTime |
1.3.6.1.4.1.20677.2.6.1.26.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet27Name |
1.3.6.1.4.1.20677.2.6.1.27.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet27Link |
1.3.6.1.4.1.20677.2.6.1.27.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet27SequenceTime |
1.3.6.1.4.1.20677.2.6.1.27.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet27RebootTime |
1.3.6.1.4.1.20677.2.6.1.27.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet28Name |
1.3.6.1.4.1.20677.2.6.1.28.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet28Link |
1.3.6.1.4.1.20677.2.6.1.28.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet28SequenceTime |
1.3.6.1.4.1.20677.2.6.1.28.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet28RebootTime |
1.3.6.1.4.1.20677.2.6.1.28.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet29Name |
1.3.6.1.4.1.20677.2.6.1.29.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet29Link |
1.3.6.1.4.1.20677.2.6.1.29.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet29SequenceTime |
1.3.6.1.4.1.20677.2.6.1.29.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet29RebootTime |
1.3.6.1.4.1.20677.2.6.1.29.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet30Name |
1.3.6.1.4.1.20677.2.6.1.30.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet30Link |
1.3.6.1.4.1.20677.2.6.1.30.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet30SequenceTime |
1.3.6.1.4.1.20677.2.6.1.30.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet30RebootTime |
1.3.6.1.4.1.20677.2.6.1.30.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet31Name |
1.3.6.1.4.1.20677.2.6.1.31.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet31Link |
1.3.6.1.4.1.20677.2.6.1.31.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet31SequenceTime |
1.3.6.1.4.1.20677.2.6.1.31.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet31RebootTime |
1.3.6.1.4.1.20677.2.6.1.31.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet32Name |
1.3.6.1.4.1.20677.2.6.1.32.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet32Link |
1.3.6.1.4.1.20677.2.6.1.32.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet32SequenceTime |
1.3.6.1.4.1.20677.2.6.1.32.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet32RebootTime |
1.3.6.1.4.1.20677.2.6.1.32.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet33Name |
1.3.6.1.4.1.20677.2.6.1.33.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet33Link |
1.3.6.1.4.1.20677.2.6.1.33.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet33SequenceTime |
1.3.6.1.4.1.20677.2.6.1.33.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet33RebootTime |
1.3.6.1.4.1.20677.2.6.1.33.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet34Name |
1.3.6.1.4.1.20677.2.6.1.34.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet34Link |
1.3.6.1.4.1.20677.2.6.1.34.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet34SequenceTime |
1.3.6.1.4.1.20677.2.6.1.34.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet34RebootTime |
1.3.6.1.4.1.20677.2.6.1.34.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet35Name |
1.3.6.1.4.1.20677.2.6.1.35.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet35Link |
1.3.6.1.4.1.20677.2.6.1.35.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet35SequenceTime |
1.3.6.1.4.1.20677.2.6.1.35.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet35RebootTime |
1.3.6.1.4.1.20677.2.6.1.35.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet36Name |
1.3.6.1.4.1.20677.2.6.1.36.1 |
Descriptive outlet name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outlet36Link |
1.3.6.1.4.1.20677.2.6.1.36.3 |
URL of web configuration interface for the device connected to this outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
outlet36SequenceTime |
1.3.6.1.4.1.20677.2.6.1.36.4 |
Time in seconds for the outlet to delay turning on after a Sequence On command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outlet36RebootTime |
1.3.6.1.4.1.20677.2.6.1.36.5 |
Time in seconds for the outlet to remain off when a Reboot command is issued. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
globalCommand |
1.3.6.1.4.1.20677.2.6.2.1 |
Issue a command to all outlets on this unit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
nochange(0), globalOn(1), globalOff(2), sequenceOn(3), sequenceOff(4) |
|
outlet1Command |
1.3.6.1.4.1.20677.2.6.2.2 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet2Command |
1.3.6.1.4.1.20677.2.6.2.3 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet3Command |
1.3.6.1.4.1.20677.2.6.2.4 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet4Command |
1.3.6.1.4.1.20677.2.6.2.5 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet5Command |
1.3.6.1.4.1.20677.2.6.2.6 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet6Command |
1.3.6.1.4.1.20677.2.6.2.7 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet7Command |
1.3.6.1.4.1.20677.2.6.2.8 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet8Command |
1.3.6.1.4.1.20677.2.6.2.9 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet9Command |
1.3.6.1.4.1.20677.2.6.2.10 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet10Command |
1.3.6.1.4.1.20677.2.6.2.11 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet11Command |
1.3.6.1.4.1.20677.2.6.2.12 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet12Command |
1.3.6.1.4.1.20677.2.6.2.13 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), noChange(4) |
|
outlet13Command |
1.3.6.1.4.1.20677.2.6.2.14 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet14Command |
1.3.6.1.4.1.20677.2.6.2.15 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet15Command |
1.3.6.1.4.1.20677.2.6.2.16 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet16Command |
1.3.6.1.4.1.20677.2.6.2.17 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet17Command |
1.3.6.1.4.1.20677.2.6.2.18 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet18Command |
1.3.6.1.4.1.20677.2.6.2.19 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet19Command |
1.3.6.1.4.1.20677.2.6.2.20 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet20Command |
1.3.6.1.4.1.20677.2.6.2.21 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet21Command |
1.3.6.1.4.1.20677.2.6.2.22 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet22Command |
1.3.6.1.4.1.20677.2.6.2.23 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet23Command |
1.3.6.1.4.1.20677.2.6.2.24 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet24Command |
1.3.6.1.4.1.20677.2.6.2.25 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet25Command |
1.3.6.1.4.1.20677.2.6.2.26 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet26Command |
1.3.6.1.4.1.20677.2.6.2.27 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet27Command |
1.3.6.1.4.1.20677.2.6.2.28 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet28Command |
1.3.6.1.4.1.20677.2.6.2.29 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet29Command |
1.3.6.1.4.1.20677.2.6.2.30 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet30Command |
1.3.6.1.4.1.20677.2.6.2.31 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet31Command |
1.3.6.1.4.1.20677.2.6.2.32 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet32Command |
1.3.6.1.4.1.20677.2.6.2.33 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet33Command |
1.3.6.1.4.1.20677.2.6.2.34 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet34Command |
1.3.6.1.4.1.20677.2.6.2.35 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet35Command |
1.3.6.1.4.1.20677.2.6.2.36 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet36Command |
1.3.6.1.4.1.20677.2.6.2.37 |
Issue an outlet command |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
immediateOn(1), immediateOff(2), reboot(3), nochange(4) |
|
outlet1Status |
1.3.6.1.4.1.20677.2.6.3.1 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet2Status |
1.3.6.1.4.1.20677.2.6.3.2 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet3Status |
1.3.6.1.4.1.20677.2.6.3.3 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet4Status |
1.3.6.1.4.1.20677.2.6.3.4 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet5Status |
1.3.6.1.4.1.20677.2.6.3.5 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet6Status |
1.3.6.1.4.1.20677.2.6.3.6 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet7Status |
1.3.6.1.4.1.20677.2.6.3.7 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet8Status |
1.3.6.1.4.1.20677.2.6.3.8 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet9Status |
1.3.6.1.4.1.20677.2.6.3.9 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet10Status |
1.3.6.1.4.1.20677.2.6.3.10 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet11Status |
1.3.6.1.4.1.20677.2.6.3.11 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet12Status |
1.3.6.1.4.1.20677.2.6.3.12 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet13Status |
1.3.6.1.4.1.20677.2.6.3.13 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet14Status |
1.3.6.1.4.1.20677.2.6.3.14 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet15Status |
1.3.6.1.4.1.20677.2.6.3.15 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet16Status |
1.3.6.1.4.1.20677.2.6.3.16 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet17Status |
1.3.6.1.4.1.20677.2.6.3.17 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet18Status |
1.3.6.1.4.1.20677.2.6.3.18 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet19Status |
1.3.6.1.4.1.20677.2.6.3.19 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet20Status |
1.3.6.1.4.1.20677.2.6.3.20 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet21Status |
1.3.6.1.4.1.20677.2.6.3.21 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet22Status |
1.3.6.1.4.1.20677.2.6.3.22 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet23Status |
1.3.6.1.4.1.20677.2.6.3.23 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet24Status |
1.3.6.1.4.1.20677.2.6.3.24 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet25Status |
1.3.6.1.4.1.20677.2.6.3.25 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet26Status |
1.3.6.1.4.1.20677.2.6.3.26 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet27Status |
1.3.6.1.4.1.20677.2.6.3.27 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet28Status |
1.3.6.1.4.1.20677.2.6.3.28 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet29Status |
1.3.6.1.4.1.20677.2.6.3.29 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet30Status |
1.3.6.1.4.1.20677.2.6.3.30 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet31Status |
1.3.6.1.4.1.20677.2.6.3.31 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet32Status |
1.3.6.1.4.1.20677.2.6.3.32 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet33Status |
1.3.6.1.4.1.20677.2.6.3.33 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet34Status |
1.3.6.1.4.1.20677.2.6.3.34 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet35Status |
1.3.6.1.4.1.20677.2.6.3.35 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
outlet36Status |
1.3.6.1.4.1.20677.2.6.3.36 |
Get the outlet status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
trapIpAddress |
1.3.6.1.4.1.20677.2.7.6 |
Enter the IP address to which to send SNMP traps. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
snmpEnabled |
1.3.6.1.4.1.20677.2.7.7 |
Enabled setting for SNMP interface |
Status: obsolete |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapUserLoginLogout |
1.3.6.1.4.1.20677.2.7.8.1 |
Enabled setting to send an SNMP trap when a user logs in/out of the serial, telnet, or web interfaces. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapFailedLogin |
1.3.6.1.4.1.20677.2.7.8.2 |
Enabled setting to send an SNMP trap when a user fails to log into the serial, telnet, or web interfaces because of a username or password mismatch. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapOutletActivity |
1.3.6.1.4.1.20677.2.7.8.3 |
Enabled setting to send an SNMP trap whenever an outlet changes state. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapSystemOnOff |
1.3.6.1.4.1.20677.2.7.8.4 |
Enabled setting to send an SNMP trap when the PDU powers up. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapOutletSection1Threshold |
1.3.6.1.4.1.20677.2.7.8.5 |
Enabled setting to send an SNMP trap when the section 1 thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapOutletSection2Threshold |
1.3.6.1.4.1.20677.2.7.8.6 |
Enabled setting to send an SNMP trap when the section 2 thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapOutletSection3Threshold |
1.3.6.1.4.1.20677.2.7.8.7 |
Enabled setting to send an SNMP trap when the section 3 thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapTemperatureSensor1Threshold |
1.3.6.1.4.1.20677.2.7.8.8 |
Enabled setting to send an SNMP trap when the temperature 1 sensor thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapTemperatureSensor2Threshold |
1.3.6.1.4.1.20677.2.7.8.9 |
Enabled setting to send an SNMP trap when the temperature 2 sensor thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
trapHumiditySensorThreshold |
1.3.6.1.4.1.20677.2.7.8.10 |
Enabled setting to send an SNMP trap when the humidity sensor thresholds are breached. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
tempSensor1Name |
1.3.6.1.4.1.20677.2.8.1.1.1 |
Descriptive sensor name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
tempSensor1Enable |
1.3.6.1.4.1.20677.2.8.1.1.2 |
When disabled, the sensor measurement is not displayed and the thresholds are ignored. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
tempSensor1ControlOutlet |
1.3.6.1.4.1.20677.2.8.1.1.5 |
Enabled setting to control an outlet or group based on the sensor thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
tempSensor1OutletName |
1.3.6.1.4.1.20677.2.8.1.1.6 |
Outlet or group name to control based on the sensor measurement. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
tempSensor1OutletState |
1.3.6.1.4.1.20677.2.8.1.1.7 |
turnOutletOn setting will turn the outlet/group on when the thresholds are breached and off when between the thresholds.
turnOutletOff setting will turn the outlet/group off when the thresholds are breached and on when between the thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
turnOutletOn(0), turnOutletOff(1) |
|
tempSensor2Name |
1.3.6.1.4.1.20677.2.8.1.2.1 |
Descriptive sensor name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
tempSensor2Enable |
1.3.6.1.4.1.20677.2.8.1.2.2 |
When disabled, the sensor measurement is not displayed and the thresholds are ignored. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
tempSensor2ControlOutlet |
1.3.6.1.4.1.20677.2.8.1.2.5 |
Enabled setting to control an outlet or group based on the sensor thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
tempSensor2OutletName |
1.3.6.1.4.1.20677.2.8.1.2.6 |
Outlet or group name to control based on the sensor measurement. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
tempSensor2OutletState |
1.3.6.1.4.1.20677.2.8.1.2.7 |
turnOutletOn setting will turn the outlet/group on when the thresholds are breached and off when between the thresholds.
turnOutletOff setting will turn the outlet/group off when the thresholds are breached and on when between the thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
turnOutletOn(0), turnOutletOff(1) |
|
humSensor1Name |
1.3.6.1.4.1.20677.2.8.2.1.1 |
Descriptive sensor name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
humSensor1Enable |
1.3.6.1.4.1.20677.2.8.2.1.2 |
When disabled, the sensor measurement is not displayed and the thresholds are ignored. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
humSensor1ControlOutlet |
1.3.6.1.4.1.20677.2.8.2.1.5 |
Enabled setting to control an outlet or group based on the sensor thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
humSensor1OutletName |
1.3.6.1.4.1.20677.2.8.2.1.6 |
Outlet or group name to control based on the sensor measurement. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
humSensor1OutletState |
1.3.6.1.4.1.20677.2.8.2.1.7 |
turnOutletOn setting will turn the outlet/group on when the thresholds are breached and off when between the thresholds.
turnOutletOff setting will turn the outlet/group off when the thresholds are breached and on when between the thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
turnOutletOn(0), turnOutletOff(1) |
|
outletSection1ControlOutlet |
1.3.6.1.4.1.20677.2.8.4.1.5 |
Enabled setting to control an outlet or group based on the section voltage and current thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
outletSection1OutletName |
1.3.6.1.4.1.20677.2.8.4.1.6 |
Outlet or group name to control based on the section voltage and current measurement. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outletSection2ControlOutlet |
1.3.6.1.4.1.20677.2.8.4.2.5 |
Enabled setting to control an outlet or group based on the section voltage and current thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
outletSection2OutletName |
1.3.6.1.4.1.20677.2.8.4.2.6 |
Outlet or group name to control based on the section voltage and current measurement. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outletSection3ControlOutlet |
1.3.6.1.4.1.20677.2.8.4.3.5 |
Enabled setting to control an outlet or group based on the section voltage and current thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
outletSection3OutletName |
1.3.6.1.4.1.20677.2.8.4.3.6 |
Outlet or group name to control based on the section voltage and current measurement. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outletSection4ControlOutlet |
1.3.6.1.4.1.20677.2.8.4.4.5 |
Enabled setting to control an outlet or group based on the section voltage and current thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
outletSection4OutletName |
1.3.6.1.4.1.20677.2.8.4.4.6 |
Outlet or group name to control based on the section voltage and current measurement. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outletSection5ControlOutlet |
1.3.6.1.4.1.20677.2.8.4.5.5 |
Enabled setting to control an outlet or group based on the section voltage and current thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
outletSection5OutletName |
1.3.6.1.4.1.20677.2.8.4.5.6 |
Outlet or group name to control based on the section voltage and current measurement. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
outletSection6ControlOutlet |
1.3.6.1.4.1.20677.2.8.4.6.5 |
Enabled setting to control an outlet or group based on the section voltage and current thresholds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
outletSection6OutletName |
1.3.6.1.4.1.20677.2.8.4.6.6 |
Outlet or group name to control based on the section voltage and current measurement. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..20) |
|
tempSensor1Temp |
1.3.6.1.4.1.20677.2.8.5.1 |
Temperature sensor measurement (units are indicated by the fahrenheitOrCelsius leaf under the unitConfig branch) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-100..300 |
|
tempSensor2Temp |
1.3.6.1.4.1.20677.2.8.5.2 |
Temperature sensor measurement (units are indicated by the fahrenheitOrCelsius leaf under the unitConfig branch) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-100..300 |
|
humSensor1Humidity |
1.3.6.1.4.1.20677.2.8.5.3 |
Humidity sensor measurement (percent relative humidity) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
outletSection1Voltage |
1.3.6.1.4.1.20677.2.8.6.1.1 |
Voltage measurement 1. This is either the section 1 voltage, the Line X-Y voltage, or the Phase X-N voltage, depending on the PDU hardware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection1Current |
1.3.6.1.4.1.20677.2.8.6.1.2 |
Current measurement 1. This is either the section 1 current or the Phase X current, depending on the PDU hardware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection1Va |
1.3.6.1.4.1.20677.2.8.6.1.3 |
Section 1 VA (or phase X VA, depending on the PDU hardware). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection2Voltage |
1.3.6.1.4.1.20677.2.8.6.2.1 |
Voltage measurement 2. This is either the section 2 voltage, the Line Y-Z voltage, or the Phase Y-N voltage, depending on the PDU hardware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection2Current |
1.3.6.1.4.1.20677.2.8.6.2.2 |
Current measurement 2. This is either the section 2 current or the Phase Y current, depending on the PDU hardware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection2Va |
1.3.6.1.4.1.20677.2.8.6.2.3 |
Section 2 VA (or phase Y VA, depending on the PDU hardware). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection3Voltage |
1.3.6.1.4.1.20677.2.8.6.3.1 |
Voltage measurement 3. This is either the section 3 voltage, the Line Z-X voltage, or the Phase Z-N voltage, depending on the PDU hardware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection3Current |
1.3.6.1.4.1.20677.2.8.6.3.2 |
Current measurement 3. This is either the section 3 current or the Phase Z current, depending on the PDU hardware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection3Va |
1.3.6.1.4.1.20677.2.8.6.3.3 |
Section 3 VA (or phase Z VA, depending on the PDU hardware). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
totalCurrent |
1.3.6.1.4.1.20677.2.8.6.4.2 |
Sum of current for all outlet sections (or phases) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
totalVa |
1.3.6.1.4.1.20677.2.8.6.4.3 |
Total PDU VA |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection4Voltage |
1.3.6.1.4.1.20677.2.8.6.5.1 |
Voltage measurement 4 (section 4 voltage). This object will not be present if the PDU hardware measures Line-to-Line voltage or Phase voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection4Current |
1.3.6.1.4.1.20677.2.8.6.5.2 |
Current measurement 4. This is the section 4 current. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection5Voltage |
1.3.6.1.4.1.20677.2.8.6.6.1 |
Voltage measurement 5 (section 5 voltage). This object will not be present if the PDU hardware measures Line-to-Line voltage or Phase voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection5Current |
1.3.6.1.4.1.20677.2.8.6.6.2 |
Current measurement 5. This is the section 5 current. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection6Voltage |
1.3.6.1.4.1.20677.2.8.6.7.1 |
Voltage measurement 6 (section 6 voltage). This object will not be present if the PDU hardware measures Line-to-Line voltage or Phase voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
outletSection6Current |
1.3.6.1.4.1.20677.2.8.6.7.2 |
Current measurement 6. This is the section 6 current. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
notifyOutletState |
1.3.6.1.4.1.20677.2.9.1 |
Outlet state has changed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
notifyCurrentThreshold |
1.3.6.1.4.1.20677.2.9.2 |
Current measurement has exceeded a threshold or returned from crossing a threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
notifyVoltageThreshold |
1.3.6.1.4.1.20677.2.9.3 |
Voltage measurement has exceeded a threshold or returned from crossing a threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
notifyTempSensorThreshold |
1.3.6.1.4.1.20677.2.9.4 |
Temperature measurement has exceeded a threshold or returned from crossing a threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
notifyHumidSensorThreshold |
1.3.6.1.4.1.20677.2.9.5 |
Humidity measurement has exceeded a threshold or returned from crossing a threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
notifyUserLogin |
1.3.6.1.4.1.20677.2.9.7 |
A user has logged in. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
notifyUserLogout |
1.3.6.1.4.1.20677.2.9.8 |
A user has logged out. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
notifyFailedLogin |
1.3.6.1.4.1.20677.2.9.9 |
A login failure occurred. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
notifyOutletWatchdogFailed |
1.3.6.1.4.1.20677.2.9.10 |
An outlet watchdog has failed and the corresponding outlet is being rebooted. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
infoItemIdx |
1.3.6.1.4.1.20677.2.10.1 |
Numerical index of the item that caused the notification. For example, if the notification
was related to the state of outlet 5, this value will be 5 no matter what the customized
outlet name is. Similarly, if the notification was related to a voltage threshold being
exceeded for voltage measurement 2, this value will be 2. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
infoItemName |
1.3.6.1.4.1.20677.2.10.2 |
Textual name of the item that caused the notification. For example, if an outlet
state change caused the notification, this will be the customized name of the outlet.
If a voltage threshold caused the notification, this will be the fixed name of the voltage
measurement (e.g., Line X-Y). |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
infoOutletState |
1.3.6.1.4.1.20677.2.10.3 |
The new state of an outlet. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
infoThresholdState |
1.3.6.1.4.1.20677.2.10.4 |
The new state of a measurement that has upper and lower thresholds. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
good(0), lowWarning(1), highWarning(3) |
|
infoThresholdValue |
1.3.6.1.4.1.20677.2.10.5 |
The threshold which has been crossed. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-100..300 |
|
infoMeasuredValue |
1.3.6.1.4.1.20677.2.10.6 |
The actual measured value. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-100..300 |
|
infoUserName |
1.3.6.1.4.1.20677.2.10.8 |
Login name of a user. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
compliances |
1.3.6.1.4.1.20677.2.25.1 |
The requirements for conforming to the Switched ePDU MIB. |
Status: current |
Access: accessible-for-notify |
MODULE-COMPLIANCE |
|
|
|
oldCompliances |
1.3.6.1.4.1.20677.2.25.2 |
Deprecated requirements for conforming to the Switched ePDU MIB. |
Status: deprecated |
Access: accessible-for-notify |
MODULE-COMPLIANCE |
|
|
|
obsoleteCompliances |
1.3.6.1.4.1.20677.2.25.3 |
Obsoleted requirements for conforming to the Switched ePDU MIB. |
Status: obsolete |
Access: accessible-for-notify |
MODULE-COMPLIANCE |
|
|
|
allObjects |
1.3.6.1.4.1.20677.2.25.5.1 |
The object group. |
Status: current |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
oldObjects |
1.3.6.1.4.1.20677.2.25.5.2 |
The deprecated objects group. |
Status: deprecated |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
obsoleteObjects |
1.3.6.1.4.1.20677.2.25.5.3 |
The obsoleted objects group. |
Status: obsolete |
Access: accessible-for-notify |
OBJECT-GROUP |
|
|
|
allNotifications |
1.3.6.1.4.1.20677.2.25.5.4 |
The notifications group. |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-GROUP |
|
|
|