DPS-TEXT-RTU-MIB

File: DPS-TEXT-RTU-MIB.mib (5374 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI DPS-MIB-V38

Imported symbols

DisplayString OBJECT-TYPE NOTIFICATION-TYPE
Integer32 dpsAlarmControl

Defined Types

AnalogThresholds  
Highest threshold level crossed, if MJ, MN is assumed. Will be blank if alarm is not from an analog sources
TEXTUAL-CONVENTION    
  INTEGER noAlarms(0), minorUnder(1), minorOver(2), majorUnder(3), majorOver(4), notDetected(5)  

RTUCAction  
Requested action. Latch, release, and momentary will affect relays. Sync(s) will resend traps for currently active alarms(TEXT RTU will ignore if invalid).
TEXTUAL-CONVENTION    
  INTEGER latch(1), release(2), momentary(3), syncStanding(4), syncAnalogs(5)  

Defined Values

dpsTEXTRTUv2 1.3.6.1.4.1.2682.1.5
OBJECT IDENTIFIER    

dpsTEXTRTUv2Ident 1.3.6.1.4.1.2682.1.5.1
OBJECT IDENTIFIER    

dpsTEXTRTUv2DateTime 1.3.6.1.4.1.2682.1.5.1.1
The RTU system date and time.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

dpsTEXTRTUv2DeviceType 1.3.6.1.4.1.2682.1.5.1.2
Device type of far end SMS device as received in SMS messages to SMS receiver. ie NG216_G3
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsTEXTRTUv2Phone 1.3.6.1.4.1.2682.1.5.1.3
The phone number of the far end or originating SMS RTU, only SMS RTUs will have/respond to this variable
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsTEXTRTUv2AlarmGrid 1.3.6.1.4.1.2682.1.5.2
OBJECT IDENTIFIER    

dpsTEXTRTUv2ADisplay 1.3.6.1.4.1.2682.1.5.2.1
TEXT RTU display number. See the usermanual for display mapping information
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dpsTEXTRTUv2APoint 1.3.6.1.4.1.2682.1.5.2.2
TEXT RTU point number. See the usermanual for point mapping information
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dpsTEXTRTUv2APntDesc 1.3.6.1.4.1.2682.1.5.2.3
A description of this point.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsTEXTRTUv2AState 1.3.6.1.4.1.2682.1.5.2.4
The current state of this point.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsTEXTRTUAnalogvalue 1.3.6.1.4.1.2682.1.5.2.5
The current value of the channel. Will be blank if alarm is not from an analog source
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dpsTEXTRTUAnalogthresholds 1.3.6.1.4.1.2682.1.5.2.6
Highest threshold level crossed, if MJ, MN is assumed. Will be blank if alarm is not from an analog sources
Status: current Access: read-only
OBJECT-TYPE    
  AnalogThresholds  

dpsTEXTRTUv2ControlGrid 1.3.6.1.4.1.2682.1.5.3
OBJECT IDENTIFIER    

dpsTEXTRTUv2CDisplay 1.3.6.1.4.1.2682.1.5.3.1
RTU_port_address display number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dpsTEXTRTUv2CPoint 1.3.6.1.4.1.2682.1.5.3.2
RTU_port_display point number (1-64).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..64  

dpsTEXTRTUv2CMOMTime 1.3.6.1.4.1.2682.1.5.3.3
Momentary latch time (in milliseconds). If value is blank, the default of 600ms will be used
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dpsTEXTRTUv2CAction 1.3.6.1.4.1.2682.1.5.3.4
Requested action. Latch, release, and momentary will affect relays. Sync(s) will resend traps for currently active alarms(TEXT RTU will ignore if invalid).
Status: current Access: read-write
OBJECT-TYPE    
  RTUCAction  

dpsTEXTRTUv2AlarmSet 1.3.6.1.4.1.2682.1.5.100
Generated when alarm is received from far end SMS device to SMS receiver.
Status: current Access: read-write
NOTIFICATION-TYPE    

dpsTEXTRTUv2AlarmClear 1.3.6.1.4.1.2682.1.5.200
Generated when clear is received from far end SMS device to SMS receiver.
Status: current Access: read-write
NOTIFICATION-TYPE