DIAMETER-BASE-PROTOCOL-MIB

File: DIAMETER-BASE-PROTOCOL-MIB.mib (88140 bytes)

Imported modules

INET-ADDRESS-MIB	SNMPv2-SMI	SNMP-FRAMEWORK-MIB
SNMPv2-CONF	SNMPv2-TC

Imported symbols

InetAddressType	InetAddress	MODULE-IDENTITY
OBJECT-TYPE	NOTIFICATION-TYPE	Counter32
Unsigned32	Gauge32	TimeTicks
mib-2	SnmpAdminString	NOTIFICATION-GROUP
MODULE-COMPLIANCE	OBJECT-GROUP	RowStatus
TruthValue	StorageType

Defined Types

DbpLocalIpAddrEntry
SEQUENCE
	dbpLocalIpAddrIndex	Unsigned32
	dbpLocalIpAddrType	InetAddressType
	dbpLocalIpAddress	InetAddress

DbpLocalApplicationsEntry
SEQUENCE
	dbpLocalApplicationsIndex	Unsigned32
	dbpLocalApplStorageType	StorageType
	dbpLocalApplicationsStatus	RowStatus

DbpPeerEntry
SEQUENCE
	dbpPeerIndex	Unsigned32
	dbpPeerId	SnmpAdminString
	dbpPeerPortConnect	Unsigned32
	dbpPeerPortListen	Unsigned32
	dbpPeerProtocol	INTEGER
	dbpPeerSecurity	INTEGER
	dbpPeerFirmwareRevision	Unsigned32
	dbpPeerStorageType	StorageType
	dbpPeerStatus	RowStatus

DbpPeerIpAddrEntry
SEQUENCE
	dbpPeerIpAddressIndex	Unsigned32
	dbpPeerIpAddressType	InetAddressType
	dbpPeerIpAddress	InetAddress

DbpAppAdvToPeerEntry
SEQUENCE
	dbpAppAdvToPeerVendorId	Unsigned32
	dbpAppAdvToPeerIndex	Unsigned32
	dbpAppAdvToPeerServices	INTEGER
	dbpAppAppAdvToPeerStorageType	StorageType
	dbpAppAdvToPeerStatus	RowStatus

DbpAppAdvFromPeerEntry
SEQUENCE
	dbpAppAdvFromPeerVendorId	Unsigned32
	dbpAppAdvFromPeerIndex	Unsigned32
	dbpAppAdvFromPeerType	INTEGER

DbpPeerVendorEntry
SEQUENCE
	dbpPeerVendorIndex	Unsigned32
	dbpPeerVendorId	INTEGER
	dbpPeerVendorStorageType	StorageType
	dbpPeerVendorRowStatus	RowStatus

DbpPerPeerStatsEntry
SEQUENCE
	dbpPerPeerStatsState	INTEGER
	dbpPerPeerStatsStateDuration	TimeTicks
	dbpPerPeerStatsLastDiscCause	INTEGER
	dbpPerPeerStatsWhoInitDisconnect	INTEGER
	dbpPerPeerStatsDWCurrentStatus	INTEGER
	dbpPerPeerStatsTimeoutConnAtmpts	Counter32
	dbpPerPeerStatsASRsIn	Counter32
	dbpPerPeerStatsASRsOut	Counter32
	dbpPerPeerStatsASAsIn	Counter32
	dbpPerPeerStatsASAsOut	Counter32
	dbpPerPeerStatsACRsIn	Counter32
	dbpPerPeerStatsACRsOut	Counter32
	dbpPerPeerStatsACAsIn	Counter32
	dbpPerPeerStatsACAsOut	Counter32
	dbpPerPeerStatsCERsIn	Counter32
	dbpPerPeerStatsCERsOut	Counter32
	dbpPerPeerStatsCEAsIn	Counter32
	dbpPerPeerStatsCEAsOut	Counter32
	dbpPerPeerStatsDWRsIn	Counter32
	dbpPerPeerStatsDWRsOut	Counter32
	dbpPerPeerStatsDWAsIn	Counter32
	dbpPerPeerStatsDWAsOut	Counter32
	dbpPerPeerStatsDPRsIn	Counter32
	dbpPerPeerStatsDPRsOut	Counter32
	dbpPerPeerStatsDPAsIn	Counter32
	dbpPerPeerStatsDPAsOut	Counter32
	dbpPerPeerStatsRARsIn	Counter32
	dbpPerPeerStatsRARsOut	Counter32
	dbpPerPeerStatsRAAsIn	Counter32
	dbpPerPeerStatsRAAsOut	Counter32
	dbpPerPeerStatsSTRsIn	Counter32
	dbpPerPeerStatsSTRsOut	Counter32
	dbpPerPeerStatsSTAsIn	Counter32
	dbpPerPeerStatsSTAsOut	Counter32
	dbpPerPeerStatsDWReqTimer	TimeTicks
	dbpPerPeerStatsRedirectEvents	Counter32
	dbpPerPeerStatsAccDupRequests	Counter32
	dbpPerPeerStatsMalformedReqsts	Counter32
	dbpPerPeerStatsAccsNotRecorded	Counter32
	dbpPerPeerStatsAccRetrans	Counter32
	dbpPerPeerStatsTotalRetrans	Counter32
	dbpPerPeerStatsAccPendReqstsOut	Gauge32
	dbpPerPeerStatsAccReqstsDropped	Counter32
	dbpPerPeerStatsHByHDropMessages	Counter32
	dbpPerPeerStatsEToEDupMessages	Counter32
	dbpPerPeerStatsUnknownTypes	Counter32
	dbpPerPeerStatsProtocolErrors	Counter32
	dbpPerPeerStatsTransientFailures	Counter32
	dbpPerPeerStatsPermanentFailures	Counter32
	dbpPerPeerStatsTransportDown	Counter32

DbpRealmMessageRouteEntry
SEQUENCE
	dbpRealmMessageRouteIndex	Unsigned32
	dbpRealmMessageRouteRealm	SnmpAdminString
	dbpRealmMessageRouteApp	Unsigned32
	dbpRealmMessageRouteType	INTEGER
	dbpRealmMessageRouteAction	INTEGER
	dbpRealmMessageRouteACRsIn	Counter32
	dbpRealmMessageRouteACRsOut	Counter32
	dbpRealmMessageRouteACAsIn	Counter32
	dbpRealmMessageRouteACAsOut	Counter32
	dbpRealmMessageRouteRARsIn	Counter32
	dbpRealmMessageRouteRARsOut	Counter32
	dbpRealmMessageRouteRAAsIn	Counter32
	dbpRealmMessageRouteRAAsOut	Counter32
	dbpRealmMessageRouteSTRsIn	Counter32
	dbpRealmMessageRouteSTRsOut	Counter32
	dbpRealmMessageRouteSTAsIn	Counter32
	dbpRealmMessageRouteSTAsOut	Counter32
	dbpRealmMessageRouteASRsIn	Counter32
	dbpRealmMessageRouteASRsOut	Counter32
	dbpRealmMessageRouteASAsIn	Counter32
	dbpRealmMessageRouteASAsOut	Counter32
	dbpRealmMessageRouteAccRetrans	Counter32
	dbpRealmMessageRouteAccDupReqsts	Counter32
	dbpRealmMessageRoutePendReqstsOut	Gauge32
	dbpRealmMessageRouteReqstsDrop	Counter32

DbpRealmKnownPeersEntry
SEQUENCE
	dbpRealmKnownPeersIndex	Unsigned32
	dbpRealmKnownPeers	Unsigned32
	dbpRealmKnownPeersChosen	INTEGER

Defined Values

diameterBasePMIB		1.3.6.1.2.1.119
The MIB module for entities implementing the Diameter Base Protocol. Copyright (C) The Internet Society (2007). This initial version of this MIB module was published in RFC yyyy; for full legal notices see the RFC itself. Supplementary information may be available on http://www.ietf.org/copyrights/ianamib.html.
MODULE-IDENTITY

diameterBaseProtocolMIB		1.3.6.1.2.1.119.1
OBJECT IDENTIFIER

diameterBaseNotifications		1.3.6.1.2.1.119.1.0
OBJECT IDENTIFIER

diameterBaseObjects		1.3.6.1.2.1.119.1.1
OBJECT IDENTIFIER

diameterBaseConform		1.3.6.1.2.1.119.1.2
OBJECT IDENTIFIER

dbpLocalCfgs		1.3.6.1.2.1.119.1.1.1
OBJECT IDENTIFIER

dbpLocalStats		1.3.6.1.2.1.119.1.1.2
OBJECT IDENTIFIER

dbpPeerCfgs		1.3.6.1.2.1.119.1.1.3
OBJECT IDENTIFIER

dbpPeerStats		1.3.6.1.2.1.119.1.1.4
OBJECT IDENTIFIER

dbpRealmCfgs		1.3.6.1.2.1.119.1.1.5
OBJECT IDENTIFIER

dbpRealmStats		1.3.6.1.2.1.119.1.1.6
OBJECT IDENTIFIER

dbpNotifCfgs		1.3.6.1.2.1.119.1.1.7
OBJECT IDENTIFIER

dbpProtocolErrorNotifEnabled		1.3.6.1.2.1.119.1.1.7.1
Setting the value of this object to True(1) enables the dbpProtocolErrorNotif notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dbpProtocolErrorNotif		1.3.6.1.2.1.119.1.0.1
An dbpProtocolError Notification is sent when both the following conditions are true: 1) the value of dbpProtocolErrorNotifEnabled is True(1) 2) the value of dbpPerPeerStatsProtocolErrors changes It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpProtocolError 'notification event' in a five second period, where a 'notification event' is the transmission of a single Notification PDU to a list of Notification destinations. If additional premanent failures occur within the five second 'throttling' period, then these notification events should be suppressed by the agent. An NMS should periodically check the value of dbpPerPeerStatsProtocolErrors to detect any missed dbpProtocolError notification events, e.g. due to throttling or transmission loss.
Status: current	Access: read-write
NOTIFICATION-TYPE

dbpTransientFailureNotifEnabled		1.3.6.1.2.1.119.1.1.7.2
Setting the value of this object to True(1) enables the dbpTransientFailure Notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dbpTransientFailureNotif		1.3.6.1.2.1.119.1.0.2
An dbpTransientFailure Notification is sent when both the following conditions are true: 1) the value of dbpTransientFailureNotifEnabled is True(1) 2) the value of dbpPerPeerStatsTransientFailures changes It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpTransientFailure 'notification event' in a five second period, where a 'notification event' is the transmission of a single notification PDU to a list of notification destinations. If additional transient failures occur within the five second 'throttling' period, then these notification events should be suppressed by the agent. An NMS should periodically check the value of dbpPerPeerStatsTransientFailures to detect any missed dbpTransientFailure notification events, e.g. due to throttling or transmission loss.
Status: current	Access: read-write
NOTIFICATION-TYPE

dbpPermanentFailureNotifEnabled		1.3.6.1.2.1.119.1.1.7.3
Setting the value of this object to True(1) enables the dbpPermanentFailure notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dbpPermanentFailureNotif		1.3.6.1.2.1.119.1.0.3
An dbpPermanentFailure notification is sent when both the following conditions are true: 1) the value of dbpPermanentFailureNotifEnabled is True(1) 2) the value of dbpPerPeerStatsPermanentFailures changes It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpPermanentFailure 'notification event' in a five second period, where a 'notification event' is the transmission of a single notification PDU to a list of notification destinations. If additional premanent failures occur within the five second 'throttling' period, then these trap-events should be suppressed by the agent. An NMS should periodically check the value of dbpPerPeerStatsPermanentFailures to detect any missed dbpPermanentFailure trap-events, e.g. due to throttling or transmission loss.
Status: current	Access: read-write
NOTIFICATION-TYPE

dbpPeerConnectionDownNotifEnabled		1.3.6.1.2.1.119.1.1.7.4
Setting the value of this object to True(1) enables the dbpPeerConnectionDown notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dbpPeerConnectionDownNotif		1.3.6.1.2.1.119.1.0.4
An dbpPeerConnectionDown notification is sent when both the following conditions are true: 1) the value of dbpPeerConnectionDownNotifEnabled is True(1) 2) dbpPerPeerStatsState changes to closed(1) It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpPeerConnectionDown 'notification event' in a five second period, where a 'notification event' is the transmission of a single notification PDU to a list of notification destinations. If additional 'transport down' events occur within the five second 'throttling' period, then these trap-events should be suppressed by the agent.
Status: current	Access: read-write
NOTIFICATION-TYPE

dbpPeerConnectionUpNotifEnabled		1.3.6.1.2.1.119.1.1.7.5
Setting the value of this object to True(1) enables the dbpPeerConnectionUp notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dbpPeerConnectionUpNotif		1.3.6.1.2.1.119.1.0.5
An dbpPeerConnectionUp notification is sent when both thefollowing conditions are true: 1) the value of dbpPeerConnectionUpNotifEnabled is True(1) 2) the value of dbpPerPeerStatsState changes to either rOpen(6)or iOpen(7) It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpPeerConnectionDown 'notification event' in a five second period, where a 'notification event' is the transmission of a single notification PDU to a list of notification destinations. If additional 'transport down' events occur within the five second 'throttling' period, then these trap-events should be suppressed by the agent.
Status: current	Access: read-write
NOTIFICATION-TYPE

dbpLocalId		1.3.6.1.2.1.119.1.1.1.1
The implementation-specific identification string for the Diameter software in use on the system; for example: 'diameterd'
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

dbpLocalIpAddrTable		1.3.6.1.2.1.119.1.1.1.2
The table listing the Diameter local host's IP Addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpLocalIpAddrEntry

dbpLocalIpAddrEntry		1.3.6.1.2.1.119.1.1.1.2.1
A row entry representing a Diameter local host IP Address.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpLocalIpAddrEntry

dbpLocalIpAddrIndex		1.3.6.1.2.1.119.1.1.1.2.1.1
A number uniquely identifying the number of IP Addresses supported by this Diameter host.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpLocalIpAddrType		1.3.6.1.2.1.119.1.1.1.2.1.2
The type of internet address stored in dbpLocalIpAddress.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

dbpLocalIpAddress		1.3.6.1.2.1.119.1.1.1.2.1.3
The IP-Address of the host, which is of the type specified in dbpLocalIpAddrType.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

dbpLocalTcpListenPort		1.3.6.1.2.1.119.1.1.1.3
Diameter TCP 'listen' port.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

dbpLocalSctpListenPort		1.3.6.1.2.1.119.1.1.1.4
Diameter SCTP 'listen' port.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

dbpLocalOriginHost		1.3.6.1.2.1.119.1.1.1.5
This object represents the Local Origin Host.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString

dbpLocalRealm		1.3.6.1.2.1.119.1.1.1.6
This object represents the Local Realm Name.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

dbpLocalStatsTotalMessagesIn		1.3.6.1.2.1.119.1.1.2.1
The total number of Diameter Base Protocol messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpLocalStatsTotalMessagesOut		1.3.6.1.2.1.119.1.1.2.2
The total number of Diameter Base Protocol messages transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpLocalStatsTotalUpTime		1.3.6.1.2.1.119.1.1.2.3
This object represents the total time this Diameter server has been up until now.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

dbpLocalResetTime		1.3.6.1.2.1.119.1.1.2.4
If the server keeps persistent state (e.g., a process) and supports a 'reset' operation (e.g., can be told to re-read configuration files), this value will be the time elapsed (in hundredths of a second) since the server was 'reset'. For software that does not have persistence or does not support a 'reset' operation, this value will be zero.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

dbpLocalConfigReset		1.3.6.1.2.1.119.1.1.2.5
Status/action object to reinitialize any persistent server state. When set to reset(2), any persistent server state (such as a process) is reinitialized as if the server had just been started. This value will never be returned by a read operation. When read, one of the following values will be returned: other(1) - server in some unknown state; reset(2) - command to reinitialize server state; initializing(3) - server (re)initializing; running(4) - server currently running.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), reset(2), initializing(3), running(4)

dbpLocalApplicationsTable		1.3.6.1.2.1.119.1.1.1.7
The table listing the Diameter applications supported by this server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpLocalApplicationsEntry

dbpLocalApplicationsEntry		1.3.6.1.2.1.119.1.1.1.7.1
A row entry representing a Diameter application on this server.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpLocalApplicationsEntry

dbpLocalApplicationsIndex		1.3.6.1.2.1.119.1.1.1.7.1.1
A number uniquely identifying a supported Diameter application. Upon reload, dbpLocalApplIndex values may be changed.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpLocalApplStorageType		1.3.6.1.2.1.119.1.1.1.7.1.2
The storage type for this conceptual row. None of the columnar objects is writable when the conceptual row is permanent.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

dbpLocalApplicationsStatus		1.3.6.1.2.1.119.1.1.1.7.1.3
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdsgStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding dbpLocalApplIndex has been set. dbpLocalApplIndex may not be modified while the value of this object is active(1): An attempt to set these objects while the value of dbpLocalApplStatus is active(1) will result in an inconsistentValue error. Entries in this table with dbpLocalApplStatus equal to active(1) remain in the table until destroyed. Entries in this table with dbpLocalApplStatus equal to values other than active(1) will be destroyed after timeout (5 minutes).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

dbpPeerTable		1.3.6.1.2.1.119.1.1.3.1
The table listing information regarding the discovered or configured Diameter peer servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpPeerEntry

dbpPeerEntry		1.3.6.1.2.1.119.1.1.3.1.1
A row entry representing a discovered or configured Diameter peer server.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpPeerEntry

dbpPeerIndex		1.3.6.1.2.1.119.1.1.3.1.1.1
A number uniquely identifying each Diameter peer with which the host server communicates. Upon reload, dbpPeerIndex values may be changed.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpPeerId		1.3.6.1.2.1.119.1.1.3.1.1.2
The server identifier for the Diameter peer. It must be unique and non-empty.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString

dbpPeerPortConnect		1.3.6.1.2.1.119.1.1.3.1.1.3
The connection port this server used to connect to the Diameter peer. If there is no active connection, this value will be zero(0).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

dbpPeerPortListen		1.3.6.1.2.1.119.1.1.3.1.1.4
The port the server is listening on.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

dbpPeerProtocol		1.3.6.1.2.1.119.1.1.3.1.1.5
The transport protocol (tcp/sctp) the Diameter peer is using.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tcp(1), sctp(2)

dbpPeerSecurity		1.3.6.1.2.1.119.1.1.3.1.1.6
The security the Diameter peer is using. other(1) - Unknown Security Protocol tls(2) - Transport Layer Security Protocol ipsec(3) - Internet Protocol Security
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), tls(2), ipsec(3)

dbpPeerFirmwareRevision		1.3.6.1.2.1.119.1.1.3.1.1.7
Firmware revision of peer. If no firmware revision, the revision of the Diameter software module may be reported instead.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpPeerStorageType		1.3.6.1.2.1.119.1.1.3.1.1.8
The storage type for this conceptual row. Only the dbpPeerPortListen object is writable when the conceptual row is permanent.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

dbpPeerStatus		1.3.6.1.2.1.119.1.1.3.1.1.9
Status of the peer entry: creating the entry enables the peer, destroying the entry disables the peer.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

dbpPeerIpAddrTable		1.3.6.1.2.1.119.1.1.3.2
The table listing the Diameter peer IP addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpPeerIpAddrEntry

dbpPeerIpAddrEntry		1.3.6.1.2.1.119.1.1.3.2.1
A row entry representing a peer Diameter server.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpPeerIpAddrEntry

dbpPerrIpAddressIndex		1.3.6.1.2.1.119.1.1.3.2.1.1
A number uniquely identifying the number of IP Addresses supported by all Diameter peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpPeerIpAddressType		1.3.6.1.2.1.119.1.1.3.2.1.2
The type of address stored in diameterPeerIpAddress.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

dbpPeerIpAddress		1.3.6.1.2.1.119.1.1.3.2.1.3
The active IP Address(es) used for connections.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

dbpAppAdvToPeerTable		1.3.6.1.2.1.119.1.1.1.8
The table listing the applications advertised by this host to each peer and the types of service supported: accounting, authentication or both.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpAppAdvToPeerEntry

dbpAppAdvToPeerEntry		1.3.6.1.2.1.119.1.1.1.8.1
A row entry representing a discovered or configured Diameter peer server.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpAppAdvToPeerEntry

dbpAppAdvToPeerVendorId		1.3.6.1.2.1.119.1.1.1.8.1.1
The IANA Enterprise Code value assigned to the vendor of the Diameter device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpAppAdvToPeerIndex		1.3.6.1.2.1.119.1.1.1.8.1.2
A number uniquely identifying a Diameter application advertised as supported by this host to each peer. Upon reload, dbpAppAdvToPeerIndex values may be changed
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpAppAdvToPeerServices		1.3.6.1.2.1.119.1.1.1.8.1.3
The type of services supported for each application, accounting, authentication or both.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	acct(1), auth(2), both(3)

dbpAppAdvToPeerStorageType		1.3.6.1.2.1.119.1.1.1.8.1.4
The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

dbpAppAdvToPeerStatus		1.3.6.1.2.1.119.1.1.1.8.1.5
Status of the entry: creating the entry causes the application to be advertised, destroying the entry ceases advertisement.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

dbpAppAdvFromPeerTable		1.3.6.1.2.1.119.1.1.3.3
The table listing the applications advertised by each peer to this host and the types of service supported: accounting, authentication or both.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpAppAdvFromPeerEntry

dbpAppAdvFromPeerEntry		1.3.6.1.2.1.119.1.1.3.3.1
A row entry representing a discovered or configured Diameter peer server.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpAppAdvFromPeerEntry

dbpAppAdvFromPeerVendorId		1.3.6.1.2.1.119.1.1.3.3.1.1
The IANA Enterprise Code value assigned to the vendor of the Diameter application.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpAppAdvFromPeerIndex		1.3.6.1.2.1.119.1.1.3.3.1.2
A number uniquely identifying the applications advertised as supported from each Diameter peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpAppAdvFromPeerType		1.3.6.1.2.1.119.1.1.3.3.1.3
The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	acct(1), auth(2), both(3)

dbpPeerVendorTable		1.3.6.1.2.1.119.1.1.3.4
The table listing the Vendor IDs supported by the peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpPeerVendorEntry

dbpPeerVendorEntry		1.3.6.1.2.1.119.1.1.3.4.1
A row entry representing a Vendor ID supported by the peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpPeerVendorEntry

dbpPeerVendorIndex		1.3.6.1.2.1.119.1.1.3.4.1.1
A number uniquely identifying the Vendor ID supported by the peer. Upon reload, dbpPeerVendorIndex values may be changed.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpPeerVendorId		1.3.6.1.2.1.119.1.1.3.4.1.2
The active vendor ID used for peer connections. diameterVendorIetf(0) -- IETF diameterVendor3gpp(10415) - 3GPP
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	diameterVendorIetf(0), diameterVendorCisco(9), diameterVendor3gpp(10415), diameterVendorVodafone(12645)

dbpPeerVendorStorageType		1.3.6.1.2.1.119.1.1.3.4.1.3
The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

dbpPeerVendorRowStatus		1.3.6.1.2.1.119.1.1.3.4.1.4
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the dbpPeerVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding dbpPeerVendorId has been set. Also, a newly created row cannot be made active until the corresponding 'dbpPeerIndex' has been set. dbpPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of dbpPeerVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with dbpPeerVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with dbpPeerVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

dbpPerPeerStatsTable		1.3.6.1.2.1.119.1.1.4.1
The table listing the Diameter peer statistics.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpPerPeerStatsEntry

dbpPerPeerStatsEntry		1.3.6.1.2.1.119.1.1.4.1.1
A row entry representing a Diameter peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpPerPeerStatsEntry

dbpPerPeerStatsState		1.3.6.1.2.1.119.1.1.4.1.1.1
Connection state in the Peer State Machine of the peer with which this Diameter server is communicating. closed - Connection closed with this peer. waitConnAck - Waiting for an acknowledgment from this peer. waitICea - Waiting for a Capabilities-Exchange- Answer from this peer. elect - When the peer and the server are both trying to bring up a connection with each other at the same time. An election process begins which determines which socket remains open. waitReturns - Waiting for election returns. r-open - Responder transport connection is used for communication. i-open - Initiator transport connection is used for communication. closing - Actively closing and doing cleanup.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	closed(1), waitConnAck(2), waitICea(3), elect(4), waitReturns(5), rOpen(6), iOpen(7), closing(8)

dbpPerPeerStatsStateDuration		1.3.6.1.2.1.119.1.1.4.1.1.2
Peer state duration.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

dbpPerPeerStatsLastDiscCause		1.3.6.1.2.1.119.1.1.4.1.1.3
The last cause for a peers disconnection. rebooting - A scheduled reboot is imminent. busy - The peer's internal resources are constrained, and it has determined that the transport connection needs to be shutdown. doNotWantToTalk - The peer has determined that it does not see a need for the transport connection to exist, since it does not expect any messages to be exchanged in the foreseeable future. electionLost - The peer has determined that it has lost the election process and has therefore disconnected the transport connection.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	rebooting(1), busy(2), doNotWantToTalk(3), election(4)

dbpPerPeerStatsWhoInitDisconnect		1.3.6.1.2.1.119.1.1.4.1.1.4
Did the host or peer initiate the disconnect? host - If this server initiated the disconnect. peer - If the peer with which this server was connected initiated the disconnect.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	host(1), peer(2)

dbpPerPeerStatsDWCurrentStatus		1.3.6.1.2.1.119.1.1.4.1.1.5
okay - Indicates the connection is presumed working. suspect - Indicates the connection is possibly congested or down. down - The peer is no longer reachable, causing the transport connection to be shutdown. reopen - Three watchdog messages are exchanged with accepted round trip times, and the connection to the peer is considered stabilized.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	okay(1), suspect(2), down(3), reopen(4)

dbpPerPeerStatsTimeoutConnAtmpts		1.3.6.1.2.1.119.1.1.4.1.1.6
If there is no transport connection with a peer, this is the number of times the server attempts to connect to that peer. This is reset on disconnection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsASRsIn		1.3.6.1.2.1.119.1.1.4.1.1.7
Abort-Session-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsASRsOut		1.3.6.1.2.1.119.1.1.4.1.1.8
Abort-Session-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsASAsIn		1.3.6.1.2.1.119.1.1.4.1.1.9
Number of Abort-Session-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsASAsOut		1.3.6.1.2.1.119.1.1.4.1.1.10
Number of Abort-Session-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsACRsIn		1.3.6.1.2.1.119.1.1.4.1.1.11
Number of Accounting-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsACRsOut		1.3.6.1.2.1.119.1.1.4.1.1.12
Number of Accounting-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsACAsIn		1.3.6.1.2.1.119.1.1.4.1.1.13
Number of Accounting-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsACAsOut		1.3.6.1.2.1.119.1.1.4.1.1.14
Number of Accounting-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsCERsIn		1.3.6.1.2.1.119.1.1.4.1.1.15
Number of Capabilities-Exchange-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsCERsOut		1.3.6.1.2.1.119.1.1.4.1.1.16
Number of Capabilities-Exchange-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsCEAsIn		1.3.6.1.2.1.119.1.1.4.1.1.17
Number of Capabilities-Exchange-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsCEAsOut		1.3.6.1.2.1.119.1.1.4.1.1.18
Number of Capabilities-Exchange-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsDWRsIn		1.3.6.1.2.1.119.1.1.4.1.1.19
Number of Device-Watchdog-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsDWRsOut		1.3.6.1.2.1.119.1.1.4.1.1.20
Number of Device-Watchdog-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsDWAsIn		1.3.6.1.2.1.119.1.1.4.1.1.21
Number of Device-Watchdog-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsDWAsOut		1.3.6.1.2.1.119.1.1.4.1.1.22
Number of Device-Watchdog-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsDPRsIn		1.3.6.1.2.1.119.1.1.4.1.1.23
Number of Disconnect-Peer-Request messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsDPRsOut		1.3.6.1.2.1.119.1.1.4.1.1.24
Number of Disconnect-Peer-Request messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsDPAsIn		1.3.6.1.2.1.119.1.1.4.1.1.25
Number of Disconnect-Peer-Answer messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsDPAsOut		1.3.6.1.2.1.119.1.1.4.1.1.26
Number of Disconnect-Peer-Answer messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsRARsIn		1.3.6.1.2.1.119.1.1.4.1.1.27
Number of Re-Auth-Request messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsRARsOut		1.3.6.1.2.1.119.1.1.4.1.1.28
Number of Re-Auth-Request messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsRAAsIn		1.3.6.1.2.1.119.1.1.4.1.1.29
Number of Re-Auth-Answer messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsRAAsOut		1.3.6.1.2.1.119.1.1.4.1.1.30
Number of Re-Auth-Answer messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsSTRsIn		1.3.6.1.2.1.119.1.1.4.1.1.31
Number of Session-Termination-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsSTRsOut		1.3.6.1.2.1.119.1.1.4.1.1.32
Number of Session-Termination-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsSTAsIn		1.3.6.1.2.1.119.1.1.4.1.1.33
Number of Session-Termination-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsSTAsOut		1.3.6.1.2.1.119.1.1.4.1.1.34
Number of Session-Termination-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsDWReqTimer		1.3.6.1.2.1.119.1.1.4.1.1.35
Device-Watchdog Request Timer, which is the interval between packets sent to peers.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

dbpPerPeerStatsRedirectEvents		1.3.6.1.2.1.119.1.1.4.1.1.36
Redirect Event count, which is the number of redirects sent from a peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsAccDupRequests		1.3.6.1.2.1.119.1.1.4.1.1.37
The number of duplicate Diameter Accounting-Request packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsMalformedReqsts		1.3.6.1.2.1.119.1.1.4.1.1.38
The number of malformed Diameter packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsAccsNotRecorded		1.3.6.1.2.1.119.1.1.4.1.1.39
The number of Diameter Accounting-Request packets which were received and responded to but not recorded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsAccRetrans		1.3.6.1.2.1.119.1.1.4.1.1.40
The number of Diameter Accounting-Request packets retransmitted to this Diameter server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsTotalRetrans		1.3.6.1.2.1.119.1.1.4.1.1.41
The number of Diameter packets retransmitted to this Diameter server, not to include Diameter Accounting-Request packets retransmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsAccPendReqstsOut		1.3.6.1.2.1.119.1.1.4.1.1.42
The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response, a timeout or a retransmission.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

dbpPerPeerStatsAccReqstsDropped		1.3.6.1.2.1.119.1.1.4.1.1.43
The number of Accounting-Requests to this server that have been dropped.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsHByHDropMessages		1.3.6.1.2.1.119.1.1.4.1.1.44
An answer message that is received with an unknown Hop-by-Hop Identifier. Does not include Accounting Requests dropped.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsEToEDupMessages		1.3.6.1.2.1.119.1.1.4.1.1.45
Duplicate answer messages that are to be locally consumed. Does not include duplicate Accounting Requests received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsUnknownTypes		1.3.6.1.2.1.119.1.1.4.1.1.46
The number of Diameter packets of unknown type which were received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsProtocolErrors		1.3.6.1.2.1.119.1.1.4.1.1.47
Number of protocol errors returned to peer, but not including redirects.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsTransientFailures		1.3.6.1.2.1.119.1.1.4.1.1.48
Transient Failure count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsPermanentFailures		1.3.6.1.2.1.119.1.1.4.1.1.49
Number of permanent failures returned to peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpPerPeerStatsTransportDown		1.3.6.1.2.1.119.1.1.4.1.1.50
Number of unexpected transport failures.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteTable		1.3.6.1.2.1.119.1.1.6.1
The table listing the Diameter Realm-based Message Route information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpRealmMessageRouteEntry

dbpRealmMessageRouteEntry		1.3.6.1.2.1.119.1.1.6.1.1
A row entry representing a Diameter Realm Based Message Route server.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpRealmMessageRouteEntry

dbpRealmMessageRouteIndex		1.3.6.1.2.1.119.1.1.6.1.1.1
A number uniquely identifying each Realm.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpRealmMessageRouteRealm		1.3.6.1.2.1.119.1.1.6.1.1.2
Realm name
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

dbpRealmMessageRouteApp		1.3.6.1.2.1.119.1.1.6.1.1.3
Application id used to route packets to this realm.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpRealmMessageRouteType		1.3.6.1.2.1.119.1.1.6.1.1.4
The types of service supported for each realm application: accounting, authentication or both.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	acct(1), auth(2), both(3)

dbpRealmMessageRouteAction		1.3.6.1.2.1.119.1.1.6.1.1.5
The action is used to identify how a message should be treated based on the realm, application and type. local - Diameter messages that resolve to a route entry with the Local Action set to Local can be satisfied locally, and do not need to be routed to another server. relay - All Diameter messages that fall within this category MUST be routed to a next-hop server, without modifying any non-routing AVPs. proxy - All Diameter messages that fall within this category MUST be routed to a next-hop server. redirect - Diameter messages that fall within this category MUST have the identity of the home Diameter server(s) appended, and returned to the sender of the message.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	local(1), relay(2), proxy(3), redirect(4)

dbpRealmMessageRouteACRsIn		1.3.6.1.2.1.119.1.1.6.1.1.6
Number of Accounting-Request messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteACRsOut		1.3.6.1.2.1.119.1.1.6.1.1.7
Number of Accounting-Request messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteACAsIn		1.3.6.1.2.1.119.1.1.6.1.1.8
Number of Accounting-Answer messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteACAsOut		1.3.6.1.2.1.119.1.1.6.1.1.9
Number of Accounting-Answer messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteRARsIn		1.3.6.1.2.1.119.1.1.6.1.1.10
Number of Re-Auth-Request messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteRARsOut		1.3.6.1.2.1.119.1.1.6.1.1.11
Number of Re-Auth-Request messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteRAAsIn		1.3.6.1.2.1.119.1.1.6.1.1.12
Number of Re-Auth-Answer messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteRAAsOut		1.3.6.1.2.1.119.1.1.6.1.1.13
Number of Re-Auth-Answer messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteSTRsIn		1.3.6.1.2.1.119.1.1.6.1.1.14
Number of Session-Termination-Request messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteSTRsOut		1.3.6.1.2.1.119.1.1.6.1.1.15
Number of Session-Termination-Request messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteSTAsIn		1.3.6.1.2.1.119.1.1.6.1.1.16
Number of Session-Termination-Answer messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteSTAsOut		1.3.6.1.2.1.119.1.1.6.1.1.17
Number of Session-Termination-Answer messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteASRsIn		1.3.6.1.2.1.119.1.1.6.1.1.18
Number of Abort-Session-Request messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteASRsOut		1.3.6.1.2.1.119.1.1.6.1.1.19
Number of Abort-Session-Request messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteASAsIn		1.3.6.1.2.1.119.1.1.6.1.1.20
Number of Abort-Session-Answer messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteASAsOut		1.3.6.1.2.1.119.1.1.6.1.1.21
Number of Abort-Session-Answer messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteAccRetrans		1.3.6.1.2.1.119.1.1.6.1.1.22
The number of Diameter accounting packets retransmitted to this realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRouteAccDupReqsts		1.3.6.1.2.1.119.1.1.6.1.1.23
The number of duplicate Diameter accounting packets sent to this realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmMessageRoutePendReqstsOut		1.3.6.1.2.1.119.1.1.6.1.1.24
The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response, a timeout or a retransmission.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

dbpRealmMessageRouteReqstsDrop		1.3.6.1.2.1.119.1.1.6.1.1.25
The number of requsts dropped by this realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

dbpRealmKnownPeersTable		1.3.6.1.2.1.119.1.1.5.1
The table listing the Diameter Realms and known peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DbpRealmKnownPeersEntry

dbpRealmKnownPeersEntry		1.3.6.1.2.1.119.1.1.5.1.1
A row entry representing a Diameter Realm and known peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	DbpRealmKnownPeersEntry

dbpRealmKnownPeersIndex		1.3.6.1.2.1.119.1.1.5.1.1.1
A sequential identifier number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpRealmKnownPeers		1.3.6.1.2.1.119.1.1.5.1.1.2
The index of the peer this realm knows about. This is an ordered list, where the ordering signifies the order in which the peers are tried. Same as the dbpPeerIndex
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

dbpRealmKnownPeersChosen		1.3.6.1.2.1.119.1.1.5.1.1.3
How the realm chooses which peer to send packets to. roundRobin - The peer used for each transaction is selected based on the order in which peers are configured. loadBalance - The peer used for each transaction is based on the load metric (maybe implementation dependent) of all peers defined for the realm, with the least loaded server selected first. firstPreferred - The first defined server is always used for transactions unless failover occurs. mostRecentFirst - The most recently used server is used first for each transaction.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	roundRobin(1), loadBalance(2), firstPreferred(3), mostRecentFirst(4), other(5)

diameterBaseProtocolMIBCompliances		1.3.6.1.2.1.119.1.2.1
OBJECT IDENTIFIER

diameterBaseProtocolMIBGroups		1.3.6.1.2.1.119.1.2.2
OBJECT IDENTIFIER

diameterBaseProtocolCompliance		1.3.6.1.2.1.119.1.2.1.1
The compliance statement for Diameter Base Protocol entities.
Status: current	Access: read-only
MODULE-COMPLIANCE

dbpLocalCfgGroup		1.3.6.1.2.1.119.1.2.2.1
A collection of objects providing configuration common to the server.
Status: current	Access: read-only
OBJECT-GROUP

dbpPeerCfgGroup		1.3.6.1.2.1.119.1.2.2.2
A collection of objects providing configuration of the Diameter peers.
Status: current	Access: read-only
OBJECT-GROUP

dbpPeerStatsGroup		1.3.6.1.2.1.119.1.2.2.3
A collection of objects providing statistics of the Diameter peers.
Status: current	Access: read-only
OBJECT-GROUP

dbpNotificationsGroup		1.3.6.1.2.1.119.1.2.2.4
The set of notifications which an agent is required to implement.
Status: current	Access: read-only
NOTIFICATION-GROUP

dbpNotifCfgGroup		1.3.6.1.2.1.119.1.2.2.5
A collection of objects providing configuration for base protocol notifications.
Status: current	Access: read-only
OBJECT-GROUP

dbpLocalCfgSkippedGroup		1.3.6.1.2.1.119.1.2.2.6
A collection of objects providing configuration common to the server.
Status: current	Access: read-only
OBJECT-GROUP

dbpLocalStatsSkippedGroup		1.3.6.1.2.1.119.1.2.2.7
A collection of objects providing statistics common to the server.
Status: current	Access: read-only
OBJECT-GROUP

dbpPeerCfgSkippedGroup		1.3.6.1.2.1.119.1.2.2.8
A collection of objects providing configuration for Diameter peers.
Status: current	Access: read-only
OBJECT-GROUP

dbpPeerStatsSkippedGroup		1.3.6.1.2.1.119.1.2.2.9
A collection of objects providing statistics of Diameter peers.
Status: current	Access: read-only
OBJECT-GROUP

dbpRealmCfgSkippedGroup		1.3.6.1.2.1.119.1.2.2.10
A collection of objects providing configuration for realm message routing.
Status: current	Access: read-only
OBJECT-GROUP

dbpRealmStatsSkippedGroup		1.3.6.1.2.1.119.1.2.2.11
A collection of objects providing statistics of realm message routing.
Status: current	Access: read-only
OBJECT-GROUP