DES3528DC-L2MGMT-MIB

File: DES3528DC-L2MGMT-MIB.mib (132559 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC DLINK-ID-REC-MIB
SW3528PRIMGMT-MIB

Imported symbols

IpAddress TimeTicks Integer32
Unsigned32 MODULE-IDENTITY OBJECT-TYPE
DisplayString RowStatus TruthValue
AgentNotifyLevel des3528dc

Defined Types

MacAddress  
OCTET STRING Size(6)    

VlanId  
INTEGER 1..4094    

PortList  
OCTET STRING Size(0..127)    

SwL2DevCtrlCFMPortEntry  
SEQUENCE    
  swL2DevCtrlCFMPortIndex INTEGER
  swL2DevCtrlCFMPortState INTEGER

SwL2VlanStaticEntry  
SEQUENCE    
  swL2VlanIndex VlanId
  swL2VLANAdvertisement INTEGER

SwL2VlanPortInfoEntry  
SEQUENCE    
  swL2VlanPortInfoPortIndex INTEGER
  swL2VlanPortInfoVid INTEGER
  swL2VlanPortInfoPortRole INTEGER

SwL2PortInfoEntry  
SEQUENCE    
  swL2PortInfoPortIndex INTEGER
  swL2PortInfoMediumType INTEGER
  swL2PortInfoUnitID INTEGER
  swL2PortInfoType INTEGER
  swL2PortInfoLinkStatus INTEGER
  swL2PortInfoNwayStatus INTEGER
  swL2PortInfoErrorDisabled INTEGER

SwL2PortCtrlEntry  
SEQUENCE    
  swL2PortCtrlPortIndex INTEGER
  swL2PortCtrlMediumType INTEGER
  swL2PortCtrlUnitIndex INTEGER
  swL2PortCtrlAdminState INTEGER
  swL2PortCtrlNwayState INTEGER
  swL2PortCtrlFlowCtrlState INTEGER
  swL2PortCtrlLearningState INTEGER
  swL2PortCtrlMACNotifyState INTEGER
  swL2PortCtrlMDIXState INTEGER

SwL2PortCableDiagnosisEntry  
SEQUENCE    
  swL2PortCableDiagnosisPortIndex INTEGER
  swL2PortCableDiagnosisPairIndex INTEGER
  swL2PortCableDiagnosisCableStatus INTEGER
  swL2PortCableDiagnosisPairStatus INTEGER
  swL2PortCableDiagnosisPairLength INTEGER
  swL2PortCableDiagnosisPairLengthInaccuracy INTEGER

SwL2PortCounterCtrlEntry  
SEQUENCE    
  swL2PortCounterCtrlPortIndex INTEGER
  swL2PortCounterClearCtrl INTEGER

SwL2PortErrEntry  
SEQUENCE    
  swL2PortErrPortIndex INTEGER
  swL2PortErrPortState INTEGER
  swL2PortErrPortConnStatus INTEGER
  swL2PortErrPortReason INTEGER

SwL2MulticastFilterProfileEntry  
SEQUENCE    
  swL2MulticastFilterProfileIndex INTEGER
  swL2MulticastFilterProfileName DisplayString
  swL2MulticastFilterStatus RowStatus

SwL2MulticastFilterProfileAddressEntry  
SEQUENCE    
  swL2MulticastFilterProfileIdIndex INTEGER
  swL2MulticastFilterFromIp IpAddress
  swL2MulticastFilterToIp IpAddress
  swL2MulticastFilterAddressState RowStatus

SwL2LimitedMulticastFilterPortEntry  
SEQUENCE    
  swL2LimitedMulticastFilterPortIndex INTEGER
  swL2LimitedMulticastFilterPortProfileID DisplayString
  swL2LimitedMulticastFilterPortAccess INTEGER
  swL2LimitedMulticastFilterPortProfileStatus INTEGER

SwL2MulticastFilterPortMaxGroupEntry  
SEQUENCE    
  swL2MulticastFilterPortMaxGroupPortIndex INTEGER
  swL2MulticastFilterPortMaxGroup INTEGER

SwL2QOSBandwidthControlEntry  
SEQUENCE    
  swL2QOSBandwidthPortIndex INTEGER
  swL2QOSBandwidthRxRate INTEGER
  swL2QOSBandwidthTxRate INTEGER
  swL2QOSBandwidthRadiusRxRate INTEGER
  swL2QOSBandwidthRadiusTxRate INTEGER

SwL2QOSSchedulingEntry  
SEQUENCE    
  swL2QOSSchedulingClassIndex INTEGER
  swL2QOSSchedulingMaxPkts INTEGER
  swL2QOSSchedulingMechanism INTEGER
  swL2QOSSchedulingMaxLatency INTEGER

SwL2QOS8021pUserPriorityEntry  
SEQUENCE    
  swL2QOS8021pUserPriorityIndex INTEGER
  swL2QOS8021pUserPriorityClass INTEGER

SwL2QOS8021pDefaultPriorityEntry  
SEQUENCE    
  swL2QOS8021pDefaultPriorityIndex INTEGER
  swL2QOS8021pDefaultPriority INTEGER
  swL2QOS8021pRadiusPriority INTEGER

SwL2PortSecurityControlEntry  
SEQUENCE    
  swL2PortSecurityPortIndex INTEGER
  swL2PortSecurityMaxLernAddr INTEGER
  swL2PortSecurityMode INTEGER
  swL2PortSecurityAdmState INTEGER
  swL2PortSecurityEntryClearCtrl INTEGER

SwL2DhcpRelayCtrlEntry  
SEQUENCE    
  swL2DhcpRelayCtrlInterfaceName DisplayString
  swL2DhcpRelayCtrlServer IpAddress
  swL2DhcpRelayCtrlState INTEGER

SwL2TrunkCtrlEntry  
SEQUENCE    
  swL2TrunkIndex INTEGER
  swL2TrunkMasterPort INTEGER
  swL2TrunkMember PortList
  swL2TrunkFloodingPort INTEGER
  swL2TrunkType INTEGER
  swL2TrunkState RowStatus

SwL2TrunkLACPPortEntry  
SEQUENCE    
  swL2TrunkLACPPortIndex INTEGER
  swL2TrunkLACPPortState INTEGER

SwL2TrunkVLANEntry  
SEQUENCE    
  swL2TrunkVLANPort INTEGER
  swL2TrunkVLANState INTEGER

SwL2IGMPCtrlEntry  
SEQUENCE    
  swL2IGMPCtrlVid INTEGER
  swL2IGMPQueryInterval INTEGER
  swL2IGMPMaxResponseTime INTEGER
  swL2IGMPRobustness INTEGER
  swL2IGMPLastMemberQueryInterval INTEGER
  swL2IGMPHostTimeout INTEGER
  swL2IGMPRouteTimeout INTEGER
  swL2IGMPLeaveTimer INTEGER
  swL2IGMPQueryState INTEGER
  swL2IGMPCurrentState INTEGER
  swL2IGMPCtrlState INTEGER
  swL2IGMPFastLeaveState INTEGER

SwL2IGMPQueryInfoEntry  
SEQUENCE    
  swL2IGMPInfoVid INTEGER
  swL2IGMPInfoQueryCount INTEGER
  swL2IGMPInfoTxQueryCount INTEGER

SwL2IGMPInfoEntry  
SEQUENCE    
  swL2IGMPVid INTEGER
  swL2IGMPGroupIpAddr IpAddress
  swL2IGMPMacAddr MacAddress
  swL2IGMPPortMap PortList
  swL2IGMPIpGroupReportCount INTEGER

SwL2IGMPRouterPortEntry  
SEQUENCE    
  swL2IGMPRouterPortVlanid INTEGER
  swL2IGMPRouterPortVlanName DisplayString
  swL2IGMPRouterPortStaticPortList PortList
  swL2IGMPRouterPortDynamicPortList PortList
  swL2IGMPRouterPortForbiddenPortList PortList

SwL2IGMPMulticastVlanEntry  
SEQUENCE    
  swL2IGMPMulticastVlanid INTEGER
  swL2IGMPMulticastVlanName DisplayString
  swL2IGMPMulticastVlanSourcePort PortList
  swL2IGMPMulticastVlanMemberPort PortList
  swL2IGMPMulticastVlanTagMemberPort PortList
  swL2IGMPMulticastVlanState INTEGER
  swL2IGMPMulticastVlanReplaceSourceIp IpAddress
  swL2IGMPMulticastVlanRowStatus RowStatus
  swL2IGMPMulticastVlanRemoveAllMcastAddrListAction INTEGER

SwL2IGMPMulticastVlanGroupEntry  
SEQUENCE    
  swL2IGMPMulticastVlanGroupVid INTEGER
  swL2IGMPMulticastVlanGroupFromIp IpAddress
  swL2IGMPMulticastVlanGroupToIp IpAddress
  swL2IGMPMulticastVlanGroupStatus RowStatus

SwL2TrafficSegEntry  
SEQUENCE    
  swL2TrafficSegPort INTEGER
  swL2TrafficSegForwardPorts PortList

SwL2MulticastFilterModeVlanEntry  
SEQUENCE    
  swL2MulticastFilterVid INTEGER
  swL2MulticastFilterVlanMode INTEGER

SwL2LoopDetectPortEntry  
SEQUENCE    
  swL2LoopDetectPortIndex INTEGER
  swL2LoopDetectPortState INTEGER
  swL2LoopDetectPortLoopVLAN DisplayString
  swL2LoopDetectPortLoopStatus INTEGER

SwL2DhcpLocalRelayVLANEntry  
SEQUENCE    
  swL2DhcpLocalRelayVLANID INTEGER
  swL2DhcpLocalRelayVLANState INTEGER

Defined Values

swL2MgmtMIB 1.3.6.1.4.1.171.11.105.5.2
The Structure of Layer 2 Network Management Information.
MODULE-IDENTITY    

swL2DevMgmt 1.3.6.1.4.1.171.11.105.5.2.1
OBJECT IDENTIFIER    

swL2VLANMgmt 1.3.6.1.4.1.171.11.105.5.2.2
OBJECT IDENTIFIER    

swL2PortMgmt 1.3.6.1.4.1.171.11.105.5.2.3
OBJECT IDENTIFIER    

swL2LimitedMulticastMgmt 1.3.6.1.4.1.171.11.105.5.2.5
OBJECT IDENTIFIER    

swL2QOSMgmt 1.3.6.1.4.1.171.11.105.5.2.6
OBJECT IDENTIFIER    

swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.105.5.2.7
OBJECT IDENTIFIER    

swL2DhcpRelayMgmt 1.3.6.1.4.1.171.11.105.5.2.8
OBJECT IDENTIFIER    

swL2TrunkMgmt 1.3.6.1.4.1.171.11.105.5.2.9
OBJECT IDENTIFIER    

swL2MirrorMgmt 1.3.6.1.4.1.171.11.105.5.2.10
OBJECT IDENTIFIER    

swL2IGMPMgmt 1.3.6.1.4.1.171.11.105.5.2.11
OBJECT IDENTIFIER    

swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.105.5.2.14
OBJECT IDENTIFIER    

swL2MulticastFilterMode 1.3.6.1.4.1.171.11.105.5.2.17
OBJECT IDENTIFIER    

swL2LoopDetectMgmt 1.3.6.1.4.1.171.11.105.5.2.18
OBJECT IDENTIFIER    

swL2DhcpLocalRelayMgmt 1.3.6.1.4.1.171.11.105.5.2.24
OBJECT IDENTIFIER    

swL2PPPoEMgmt 1.3.6.1.4.1.171.11.105.5.2.25
OBJECT IDENTIFIER    

swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.105.5.2.100
OBJECT IDENTIFIER    

swL2DevInfo 1.3.6.1.4.1.171.11.105.5.2.1.1
OBJECT IDENTIFIER    

swDevInfoTotalNumOfPort 1.3.6.1.4.1.171.11.105.5.2.1.1.1
The number of ports within this switch. This value is the sum of the ports within this switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swDevInfoNumOfPortInUse 1.3.6.1.4.1.171.11.105.5.2.1.1.2
The number of ports in this switch connected to the segment or the end stations.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swDevInfoFrontPanelLedStatus 1.3.6.1.4.1.171.11.105.5.2.1.1.4
This object is a set of system LED indications. The first five octets are defined as system LED. The first two octets are currently unused and must be set to zero. The third octet indicates the power LED. The fourth octet indicates the console LED. The fifth LED is RPS (Redundancy Power Supply) LED. The other octets are the logical port LED. Every two bytes are presented to a port. The first byte is presented as the Link/Activity LED. The second byte is presented as the Speed LED. System LED: 01 = fail/error/non existence. 02 = work normal Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second most significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

swL2DevCtrl 1.3.6.1.4.1.171.11.105.5.2.1.2
OBJECT IDENTIFIER    

swL2DevCtrlStpState 1.3.6.1.4.1.171.11.105.5.2.1.2.1
This object can enable or disable the spanning tree algorithm during the runtime of the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.105.5.2.1.2.2
This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlIGMPSnoopingMcstRTOnly 1.3.6.1.4.1.171.11.105.5.2.1.2.3
This object controls IGMP snooping forward multicast routing only state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlSnmpTrapState 1.3.6.1.4.1.171.11.105.5.2.1.2.5
This object controls the SNMP trap status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.105.5.2.1.2.6
When the object is set to active, all statistical counters will be cleared. If set to normal, no action.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), active(2)  

swL2DevCtrlVlanIdOfFDBTbl 1.3.6.1.4.1.171.11.105.5.2.1.2.7
Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is DEFAULT-VLAN-ID of the system.
Status: current Access: read-write
OBJECT-TYPE    
  VlanId  

swL2MACNotifyState 1.3.6.1.4.1.171.11.105.5.2.1.2.8
This object can enable or disable MAC Notification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.105.5.2.1.2.9
This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1 .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

swL2MACNotifyInterval 1.3.6.1.4.1.171.11.105.5.2.1.2.10
This object indicates the time interval, in seconds, which will trigger MAC notification messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

swL2DevCtrlAsymVlanState 1.3.6.1.4.1.171.11.105.5.2.1.2.13
This object enables or disables asymmetric VLANs during the runtime of the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.105.5.2.1.2.14
OBJECT IDENTIFIER    

swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.105.5.2.1.2.14.1
This object controls the Telnet status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlTelnetTcpPort 1.3.6.1.4.1.171.11.105.5.2.1.2.14.2
This object designates TCP ports. When Telnet is disabled, this object is not accessible.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

swL2DevCtrlManagementVlanId 1.3.6.1.4.1.171.11.105.5.2.1.2.16
This object controls which previously created VLANs are included in the System IP Interface.
Status: current Access: read-write
OBJECT-TYPE    
  VlanId  

swL2DevCtrlWeb 1.3.6.1.4.1.171.11.105.5.2.1.2.17
OBJECT IDENTIFIER    

swL2DevCtrlWebState 1.3.6.1.4.1.171.11.105.5.2.1.2.17.1
This object controls the Web status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlWebTcpPort 1.3.6.1.4.1.171.11.105.5.2.1.2.17.2
This object designates TCP ports. When Web is disabled, this object is not accessible.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

swL2DevCtrlLLDPState 1.3.6.1.4.1.171.11.105.5.2.1.2.18
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For the receiving of LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlLLDPForwardMessageState 1.3.6.1.4.1.171.11.105.5.2.1.2.19
When lldp is disabled and lldp forward-message is enabled, the received LLDP Data Unit packets will be forwarded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlIpAutoconfig 1.3.6.1.4.1.171.11.105.5.2.1.2.20
This object controls the IP auto configuration state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlCFM 1.3.6.1.4.1.171.11.105.5.2.1.2.21
OBJECT IDENTIFIER    

swL2DevCtrlCFMState 1.3.6.1.4.1.171.11.105.5.2.1.2.21.1
This object indicates the CFM global state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlCFMPortTable 1.3.6.1.4.1.171.11.105.5.2.1.2.21.2
A table containing CFM state of speicified ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2DevCtrlCFMPortEntry

swL2DevCtrlCFMPortEntry 1.3.6.1.4.1.171.11.105.5.2.1.2.21.2.1
The entry of CFM state on speicified ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2DevCtrlCFMPortEntry  

swL2DevCtrlCFMPortIndex 1.3.6.1.4.1.171.11.105.5.2.1.2.21.2.1.1
This object indicates the port-num.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

swL2DevCtrlCFMPortState 1.3.6.1.4.1.171.11.105.5.2.1.2.21.2.1.2
This object indicates the CFM state on per-port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlVLANTrunkState 1.3.6.1.4.1.171.11.105.5.2.1.2.22
This indicates the global state of the VLAN trunking feature of the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevAlarm 1.3.6.1.4.1.171.11.105.5.2.1.3
OBJECT IDENTIFIER    

swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.105.5.2.1.3.1
When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.105.5.2.1.3.2
This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device does not send the trap if this object value is disabled or other.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.105.5.2.1.3.3
This object determines whether or not to send a trap message when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device does not send the trap if this object value is disabled or other.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2VlanStaticTable 1.3.6.1.4.1.171.11.105.5.2.2.1
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2VlanStaticEntry

swL2VlanStaticEntry 1.3.6.1.4.1.171.11.105.5.2.2.1.1
Static information for a VLAN configured into the device by (local or network) management.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2VlanStaticEntry  

swL2VlanIndex 1.3.6.1.4.1.171.11.105.5.2.2.1.1.1
The VLAN-ID or other identifier referring to this VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

swL2VLANAdvertisement 1.3.6.1.4.1.171.11.105.5.2.2.1.1.2
This object indicates if the advertisement is active or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2PVIDAutoAssignmentState 1.3.6.1.4.1.171.11.105.5.2.2.2
This object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID can only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change the PVID. If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. Using the VLAN list command, PVID is updated as the last item of the VLAN list. When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned 'default VLAN'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2VlanPortInfoTable 1.3.6.1.4.1.171.11.105.5.2.2.3
A table containing vlan and port role information of each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2VlanPortInfoEntry

swL2VlanPortInfoEntry 1.3.6.1.4.1.171.11.105.5.2.2.3.1
The table entry of vlan port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2VlanPortInfoEntry  

swL2VlanPortInfoPortIndex 1.3.6.1.4.1.171.11.105.5.2.2.3.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2VlanPortInfoVid 1.3.6.1.4.1.171.11.105.5.2.2.3.1.2
The VLAN-ID assigned to a special port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2VlanPortInfoPortRole 1.3.6.1.4.1.171.11.105.5.2.2.3.1.3
The port role of a special port.when none,it means this port is not belong to the vlan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), untagged(2), tagged(3), dynamic(4), forbidden(5)  

swL2NniGvrpBpduAddress 1.3.6.1.4.1.171.11.105.5.2.2.6
Specifies the GVRP's BPDU MAC address of NNI port In Q-in-Q status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dot1d(1), dot1ad(2)  

swL2PortInfoTable 1.3.6.1.4.1.171.11.105.5.2.3.1
A table that contains information about every port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortInfoEntry

swL2PortInfoEntry 1.3.6.1.4.1.171.11.105.5.2.3.1.1
A list of information for each port of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortInfoEntry  

swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.105.5.2.3.1.1.1
This object indicates the module's port number.(1..Max port number in the module)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortInfoMediumType 1.3.6.1.4.1.171.11.105.5.2.3.1.1.2
Indicates medium type of the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER copper(1), fiber(2)  

swL2PortInfoUnitID 1.3.6.1.4.1.171.11.105.5.2.3.1.1.3
Indicates ID of the unit in the system
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortInfoType 1.3.6.1.4.1.171.11.105.5.2.3.1.1.4
This object indicates the connector type of this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER portType-none(0), portType-100Base-T(2), portType-100Base-X(3), portType-1000Base-T(4), portType-1000Base-X(5), portType-10GBase-R(6), portType-10GBase-CX4(7), portType-SIO(8), portType-module-empty(9), portType-user-last(10)  

swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.105.5.2.3.1.1.5
This object indicates the port link status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), link-pass(2), link-fail(3)  

swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.105.5.2.3.1.1.6
This object indicates the port speed and duplex mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER link-down(0), full-10Mbps-8023x(1), full-10Mbps-none(2), half-10Mbps-backp(3), half-10Mbps-none(4), full-100Mbps-8023x(5), full-100Mbps-none(6), half-100Mbps-backp(7), half-100Mbps-none(8), full-1Gigabps-8023x(9), full-1Gigabps-none(10), half-1Gigabps-backp(11), half-1Gigabps-none(12), full-10Gigabps-8023x(13), full-10Gigabps-none(14), half-10Gigabps-8023x(15), half-10Gigabps-none(16), empty(17), err-disabled(18)  

swL2PortInfoErrorDisabled 1.3.6.1.4.1.171.11.105.5.2.3.1.1.8
This object indicates the blocking type of this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), storm(1), unknow(3), ctp-lbd(4)  

swL2PortCtrlTable 1.3.6.1.4.1.171.11.105.5.2.3.2
A table that contains control information about every port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortCtrlEntry

swL2PortCtrlEntry 1.3.6.1.4.1.171.11.105.5.2.3.2.1
A list of control information for each port on the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortCtrlEntry  

swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.105.5.2.3.2.1.1
This object indicates the module's port number.(1..Max port number in the module)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortCtrlMediumType 1.3.6.1.4.1.171.11.105.5.2.3.2.1.2
Indicates the medium type of the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER copper(1), fiber(2)  

swL2PortCtrlUnitIndex 1.3.6.1.4.1.171.11.105.5.2.3.2.1.3
Indicates the ID of the unit in the device
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.105.5.2.3.2.1.4
This object decides if the port is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.105.5.2.3.2.1.5
Chose the port speed, duplex mode, and N-Way function mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8), nway-disabled-1Gigabps-Full-master(9), nway-disabled-1Gigabps-Full-slave(10)  

swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.105.5.2.3.2.1.6
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, the IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlLearningState 1.3.6.1.4.1.171.11.105.5.2.3.2.1.7
This object decides if the port is locked or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.105.5.2.3.2.1.8
This object sets each port's MAC notification state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlMDIXState 1.3.6.1.4.1.171.11.105.5.2.3.2.1.10
This object configures the MDIX setting of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), normal(2), cross(3)  

swL2PortCtrlJumboFrame 1.3.6.1.4.1.171.11.105.5.2.3.3
This object configures the switch's jumbo frame settings.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlJumboFrameMaxSize 1.3.6.1.4.1.171.11.105.5.2.3.4
This object describes how many bytes the max jumbo frame is.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2PortCableDiagnosisTable 1.3.6.1.4.1.171.11.105.5.2.3.5
A table that contains cable diagnostic information about every port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortCableDiagnosisEntry

swL2PortCableDiagnosisEntry 1.3.6.1.4.1.171.11.105.5.2.3.5.1
A list of cable diagnostic information for each port of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortCableDiagnosisEntry  

swL2PortCableDiagnosisPortIndex 1.3.6.1.4.1.171.11.105.5.2.3.5.1.1
This object indicates the module's port number.(1..Max port number in the module)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortCableDiagnosisPairIndex 1.3.6.1.4.1.171.11.105.5.2.3.5.1.2
Indicates pair index of the port. The pair 1 means the pin 3 and 6 of the connector. The pair 2 means the pin 1 and 2 of the connector. The pair 3 means the pin 7 and 8 of the connector. The pair 4 means the pin 4 and 5 of the connector.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

swL2PortCableDiagnosisCableStatus 1.3.6.1.4.1.171.11.105.5.2.3.5.1.3
This object indicates the cable status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(0), open(1), short(2), open-short(3), not-support(4), unknown(5)  

swL2PortCableDiagnosisPairStatus 1.3.6.1.4.1.171.11.105.5.2.3.5.1.4
This object indicates the status of the pair.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(0), open(1), short(2), fail(3), not-supported(4), unknown(5)  

swL2PortCableDiagnosisPairLength 1.3.6.1.4.1.171.11.105.5.2.3.5.1.5
This object indicates the approx. length or length to failure of the pair. The unit value is in meters.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2PortCableDiagnosisPairLengthInaccuracy 1.3.6.1.4.1.171.11.105.5.2.3.5.1.6
This object indicates the inaccuracy of a pair length. The unit value is in meters.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2PortCounterCtrlTable 1.3.6.1.4.1.171.11.105.5.2.3.6
A table that used to clear counter information about every port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortCounterCtrlEntry

swL2PortCounterCtrlEntry 1.3.6.1.4.1.171.11.105.5.2.3.6.1
A list of entry used to clear counter information for each port of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortCounterCtrlEntry  

swL2PortCounterCtrlPortIndex 1.3.6.1.4.1.171.11.105.5.2.3.6.1.1
This object indicates the module's port number.(1..Max port number in the module)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortCounterClearCtrl 1.3.6.1.4.1.171.11.105.5.2.3.6.1.2
This object indicates if to clear the counters for each port of the device or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), start(2)  

swL2PortErrTable 1.3.6.1.4.1.171.11.105.5.2.3.7
A table that contains error information for each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortErrEntry

swL2PortErrEntry 1.3.6.1.4.1.171.11.105.5.2.3.7.1
A list of information regarding port errors on the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortErrEntry  

swL2PortErrPortIndex 1.3.6.1.4.1.171.11.105.5.2.3.7.1.1
This object indicates the module's port number.(1..Max port number in the module).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortErrPortState 1.3.6.1.4.1.171.11.105.5.2.3.7.1.2
This object indicates the port state is enabled or disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2PortErrPortConnStatus 1.3.6.1.4.1.171.11.105.5.2.3.7.1.3
This object indicates whether the PortStatus is err-disabled or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), err-disabled(2)  

swL2PortErrPortReason 1.3.6.1.4.1.171.11.105.5.2.3.7.1.4
This object describes if the reason for the port error is STP LBD or Storm control.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER storm-control(2), ctp-lbd(3)  

swL2MulticastFilterProfileTable 1.3.6.1.4.1.171.11.105.5.2.5.1
A table that contains information about multicast filter address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2MulticastFilterProfileEntry

swL2MulticastFilterProfileEntry 1.3.6.1.4.1.171.11.105.5.2.5.1.1
A list of multicast filter address information for each profile ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2MulticastFilterProfileEntry  

swL2MulticastFilterProfileIndex 1.3.6.1.4.1.171.11.105.5.2.5.1.1.1
Indicates index for each profile.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

swL2MulticastFilterProfileName 1.3.6.1.4.1.171.11.105.5.2.5.1.1.2
Specifies a profile name for each multicast filter profile.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

swL2MulticastFilterStatus 1.3.6.1.4.1.171.11.105.5.2.5.1.1.3
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL2MulticastFilterProfileAddressTable 1.3.6.1.4.1.171.11.105.5.2.5.2
A table that contains information about multicast filter address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2MulticastFilterProfileAddressEntry

swL2MulticastFilterProfileAddressEntry 1.3.6.1.4.1.171.11.105.5.2.5.2.1
A list of multicast filter address information for each profile ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2MulticastFilterProfileAddressEntry  

swL2MulticastFilterProfileIdIndex 1.3.6.1.4.1.171.11.105.5.2.5.2.1.1
Indicates index for each profile.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

swL2MulticastFilterFromIp 1.3.6.1.4.1.171.11.105.5.2.5.2.1.2
Specifies the head IP address of a multicast address range which will be binded to a multicast filter profile.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2MulticastFilterToIp 1.3.6.1.4.1.171.11.105.5.2.5.2.1.3
Specifies the tail IP address of a multicast address range which will be binded to a multicast filter profile.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2MulticastFilterAddressState 1.3.6.1.4.1.171.11.105.5.2.5.2.1.4
This object indicates the status of this entry. Setting value to createAndGo(4) will add the multicast address list specified in swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile. Setting value to destroy(6) will remove the multicast address list specified in swL2MulticastFilterFromIp and swL2MulticastFilterToIp from multicast filter profile.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL2LimitedMulticastFilterPortTable 1.3.6.1.4.1.171.11.105.5.2.5.3
A table that used to bind port to profile id.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2LimitedMulticastFilterPortEntry

swL2LimitedMulticastFilterPortEntry 1.3.6.1.4.1.171.11.105.5.2.5.3.1
A list of information that used to bind port to profile id.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2LimitedMulticastFilterPortEntry  

swL2LimitedMulticastFilterPortIndex 1.3.6.1.4.1.171.11.105.5.2.5.3.1.1
Specifies port as an index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2LimitedMulticastFilterPortAccess 1.3.6.1.4.1.171.11.105.5.2.5.3.1.2
This object indicates the access status for each port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

swL2LimitedMulticastFilterPortProfileID 1.3.6.1.4.1.171.11.105.5.2.5.3.1.3
This object specifies a profile ID list for each port.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

swL2LimitedMulticastFilterPortProfileStatus 1.3.6.1.4.1.171.11.105.5.2.5.3.1.4
Controls the multicast filter profile list which bind to each port. When set add(2), multicast filter profile ID list which specifies in swL2LimitedMulticastFilterPortProfileID will be bound to the port. When set delete(3), multicast filter profile ID list which specifies in swL2LimitedMulticastFilterPortProfileID will be unbound from the port. The attribute value reverts to 'other' once the action has been done.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), add(2), delete(3)  

swL2MulticastFilterPortMaxGroupTable 1.3.6.1.4.1.171.11.105.5.2.5.4
A table that contains information about max group number based on port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2MulticastFilterPortMaxGroupEntry

swL2MulticastFilterPortMaxGroupEntry 1.3.6.1.4.1.171.11.105.5.2.5.4.1
A list of max group number information for each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2MulticastFilterPortMaxGroupEntry  

swL2MulticastFilterPortMaxGroupPortIndex 1.3.6.1.4.1.171.11.105.5.2.5.4.1.1
Specifies port number as table index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2MulticastFilterPortMaxGroup 1.3.6.1.4.1.171.11.105.5.2.5.4.1.2
Specifies maximum multicast filter group numbers for each port. Default value is 0,and 0 means infinite.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..256  

swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.105.5.2.6.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOSBandwidthControlEntry

swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.105.5.2.6.1.1
A list of information contained in the swL2QOSBandwidthControlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2QOSBandwidthControlEntry  

swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.105.5.2.6.1.1.1
Indicates the port .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..768  

swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.105.5.2.6.1.1.2
Indicates RX Rate of the specified port. Value 1024001 means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 64..1024001  

swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.105.5.2.6.1.1.3
Indicates TX Rate of the specified port. Value 1024001 means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 64..1024001  

swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.105.5.2.6.1.1.4
The RxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured RxRate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.105.5.2.6.1.1.5
The TxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured TxRate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.105.5.2.6.2
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOSSchedulingEntry

swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.105.5.2.6.2.1
A list of information contained in the swL2QOSSchedulingTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2QOSSchedulingEntry  

swL2QOSSchedulingClassIndex 1.3.6.1.4.1.171.11.105.5.2.6.2.1.1
Indicates the hardware queue number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOSSchedulingMaxPkts 1.3.6.1.4.1.171.11.105.5.2.6.2.1.2
Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 15 can be specified.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

swL2QOSSchedulingMechanism 1.3.6.1.4.1.171.11.105.5.2.6.2.1.3
Indicates the mechanism of QoS scheduling.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER strict(1), roundrobin(2), weightfair(3)  

swL2QOSSchedulingMaxLatency 1.3.6.1.4.1.171.11.105.5.2.6.2.1.4
Indicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin transmitting its packets. A value between 0 and 255 can be specified- with this value multiplied by 16 ms to arrive at the total allowed time for queue to transmit packets. For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting the last packet until it is finished when the max-latency timer expires.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.105.5.2.6.3
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOS8021pUserPriorityEntry

swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.105.5.2.6.3.1
A list of information contained in the swL2QOS8021pUserPriorityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2QOS8021pUserPriorityEntry  

swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.105.5.2.6.3.1.1
The 802.1p user priority .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.105.5.2.6.3.1.2
The number of the switch's hardware priority queue. The switch has seven hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..6  

swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.105.5.2.6.4
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOS8021pDefaultPriorityEntry

swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.105.5.2.6.4.1
A list of information contained in the swL2QOS8021pDefaultPriorityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2QOS8021pDefaultPriorityEntry  

swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.105.5.2.6.4.1.1
Indicates the port number .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..768  

swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.105.5.2.6.4.1.2
The priority value to assign to untagged packets received by the switch ports on the switch..
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.105.5.2.6.4.1.3
The value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2QOSSchedulingMechanismCtrl 1.3.6.1.4.1.171.11.105.5.2.6.5
This object controls QoS scheduling Mechanism.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER strict(1), roundrobin(2), weightfair(3)  

swL2QOSHolPreventionCtrl 1.3.6.1.4.1.171.11.105.5.2.6.6
Controls QoS HoL Prevention
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.105.5.2.7.1
A port security feature which controls the address leaning capability and traffic forwarding decisions. Each port can be enabled or disabled for this function. When it is enabled and a number is given said N, which allows N addresses to be learned on this port, the first N learned addresses are locked at this port as static entries. When the learned addresses number reaches N, any incoming packet without learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned on this port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortSecurityControlEntry

swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.105.5.2.7.1.1
A list of information contained in the swL2PortSecurityControlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortSecurityControlEntry  

swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.105.5.2.7.1.1.1
Indicates the secured port to lock address learning.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..768  

swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.105.5.2.7.1.1.2
Indicates allowable number of addresses to be learned on this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

swL2PortSecurityMode 1.3.6.1.4.1.171.11.105.5.2.7.1.1.3
Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address is aged out, the number of addresses that can be learned has to be increased by one. In deleteOnReset(4) mode - Locked addresses never age out unless the system restarts which will prevent port movement or intrusion.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), permanent(2), deleteOnTimeout(3), deleteOnReset(4)  

swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.105.5.2.7.1.1.4
Indicates administration state of locking address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

swL2PortSecurityEntryClearCtrl 1.3.6.1.4.1.171.11.105.5.2.7.1.1.5
Used to clear port security entries by port. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), start(2)  

swL2PortSecurityDelCtrl 1.3.6.1.4.1.171.11.105.5.2.7.2
OBJECT IDENTIFIER    

swL2PortSecurityDelVlanName 1.3.6.1.4.1.171.11.105.5.2.7.2.1
Indicates VLAN name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2PortSecurityDelPort 1.3.6.1.4.1.171.11.105.5.2.7.2.2
Indicates the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..768  

swL2PortSecurityDelMacAddress 1.3.6.1.4.1.171.11.105.5.2.7.2.3
Specifies a MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

swL2PortSecurityDelActivity 1.3.6.1.4.1.171.11.105.5.2.7.2.4
.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), start(2)  

swL2PortSecurityTrapLogState 1.3.6.1.4.1.171.11.105.5.2.7.3
When enabled(2),whenever there's a new MAC address that violates the pre-defined port security configuration, traps will be sent out and the relevant information will be logged into the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

swL2DhcpRelayState 1.3.6.1.4.1.171.11.105.5.2.8.1
This object indicates if the DHCP relay function is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DhcpRelayHopCount 1.3.6.1.4.1.171.11.105.5.2.8.2
This object indicates the maximum number of router hops that DHCP packets can cross.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

swL2DhcpRelayTimeThreshold 1.3.6.1.4.1.171.11.105.5.2.8.3
This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

swL2DhcpRelayOption82State 1.3.6.1.4.1.171.11.105.5.2.8.4
This object indicates if the DHCP relay agent information option 82 function is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DhcpRelayOption82Check 1.3.6.1.4.1.171.11.105.5.2.8.5
This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DhcpRelayOption82Policy 1.3.6.1.4.1.171.11.105.5.2.8.6
This object indicates the reforwarding policy of DHCP relay agent information option 82. replace(1) - replace the exiting option 82 field in messages. drop(2) - discard messages with existing option 82 field. keep(3) - retain the existing option 82 field messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)  

swL2DhcpRelayCtrlTable 1.3.6.1.4.1.171.11.105.5.2.8.7
This table specifies the IP address as a destination to forward (relay) DHCP packets to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2DhcpRelayCtrlEntry

swL2DhcpRelayCtrlEntry 1.3.6.1.4.1.171.11.105.5.2.8.7.1
A list of information that specifies the IP address as a destination to forward (relay) DHCP packets to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2DhcpRelayCtrlEntry  

swL2DhcpRelayCtrlInterfaceName 1.3.6.1.4.1.171.11.105.5.2.8.7.1.1
The name of the IP interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

swL2DhcpRelayCtrlServer 1.3.6.1.4.1.171.11.105.5.2.8.7.1.2
The DHCP server IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2DhcpRelayCtrlState 1.3.6.1.4.1.171.11.105.5.2.8.7.1.3
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry resides in the table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), valid(3)  

swL2TrunkMaxSupportedEntries 1.3.6.1.4.1.171.11.105.5.2.9.1
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkCurrentNumEntries 1.3.6.1.4.1.171.11.105.5.2.9.2
Current active number of entries in the trunk configuration table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkCtrlTable 1.3.6.1.4.1.171.11.105.5.2.9.3
This table specifies which ports group a set of ports(up to 8) into a single logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrunkCtrlEntry

swL2TrunkCtrlEntry 1.3.6.1.4.1.171.11.105.5.2.9.3.1
A list of information that specifies which ports group a set of ports(up to 8) into a single logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2TrunkCtrlEntry  

swL2TrunkIndex 1.3.6.1.4.1.171.11.105.5.2.9.3.1.1
The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkMasterPort 1.3.6.1.4.1.171.11.105.5.2.9.3.1.3
The object indicates the master port number of the port trunk entry. When using Port Trunk, you cannot configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

swL2TrunkMember 1.3.6.1.4.1.171.11.105.5.2.9.3.1.4
Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

swL2TrunkFloodingPort 1.3.6.1.4.1.171.11.105.5.2.9.3.1.5
The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

swL2TrunkType 1.3.6.1.4.1.171.11.105.5.2.9.3.1.6
This object indicates the type of trunk group. static : is static trunk group lacp : is LACP trunk group .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), static(2), lacp(3)  

swL2TrunkState 1.3.6.1.4.1.171.11.105.5.2.9.3.1.7
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.105.5.2.9.4
This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7)  

swL2TrunkLACPPortTable 1.3.6.1.4.1.171.11.105.5.2.9.5
This table specifies which ports group a set of ports(up to 8) into a single logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrunkLACPPortEntry

swL2TrunkLACPPortEntry 1.3.6.1.4.1.171.11.105.5.2.9.5.1
A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2TrunkLACPPortEntry  

swL2TrunkLACPPortIndex 1.3.6.1.4.1.171.11.105.5.2.9.5.1.1
The index of logical port LACP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkLACPPortState 1.3.6.1.4.1.171.11.105.5.2.9.5.1.2
The state of logical port LACP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

swL2TrunkVLANTable 1.3.6.1.4.1.171.11.105.5.2.9.6
This table is used to manage the VLAN trunking feature of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrunkVLANEntry

swL2TrunkVLANEntry 1.3.6.1.4.1.171.11.105.5.2.9.6.1
This object is used to configure the VLAN trunking settings for each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2TrunkVLANEntry  

swL2TrunkVLANPort 1.3.6.1.4.1.171.11.105.5.2.9.6.1.1
This object indicates the port being configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkVLANState 1.3.6.1.4.1.171.11.105.5.2.9.6.1.2
The state of the logical port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2MirrorLogicTargetPort 1.3.6.1.4.1.171.11.105.5.2.10.1
This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the sequential (logical) number which is also applied to the bridge MIB, etc.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

swL2MirrorPortSourceIngress 1.3.6.1.4.1.171.11.105.5.2.10.2
This represents the port where ingress packets will be sniffed.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2MirrorPortSourceEgress 1.3.6.1.4.1.171.11.105.5.2.10.3
This represents the port where egress packets will be sniffed.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2MirrorPortState 1.3.6.1.4.1.171.11.105.5.2.10.4
This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - After writing this value to the object, the corresponding entry will be removed from the table. enabled(3) - This entry resides in the table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.105.5.2.11.1
Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPMaxIpGroupNumPerVlan 1.3.6.1.4.1.171.11.105.5.2.11.2
Maximum number of multicast IP groups per VLAN in the layer 2 IGMP information table(swL2IGMPQueryInfoTable).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPSnoopingMulticastVlanState 1.3.6.1.4.1.171.11.105.5.2.11.3
It indicates the global state of igmp-snoop multicast-vlan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.105.5.2.11.4
The table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, there is only one entry in the table, with an index of 1. If the VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12, with an index range from 1 to 12.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPCtrlEntry

swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.105.5.2.11.4.1
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPCtrlEntry  

swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.105.5.2.11.4.1.1
This object indicates the IGMP control entry's VLAN ID. If the VLAN is disabled, the VID is always 0 and cannot be changed by management users. If the VLAN is in Port-Base mode, the VID is arranged from 1 to 12, in a fixed form. If the VLAN is in 802.1q mode, the VID setting can be changed from 1 to 4094 by the management user, and the VID in each entry must be unique within the IGMP Control Table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.105.5.2.11.4.1.2
The frequency at which IGMP Host-Query packets are transmitted on this switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.105.5.2.11.4.1.3
The maximum query response time on this switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..25  

swL2IGMPRobustness 1.3.6.1.4.1.171.11.105.5.2.11.4.1.4
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.105.5.2.11.4.1.5
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..25  

swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.105.5.2.11.4.1.6
The timer value for sending IGMP query packets when none were sent by the host on the LAN. The timer works on a per-VLAN basis. Our device will be activated to send the query messages if the timer expires. Please reference RFC2236-1997.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.105.5.2.11.4.1.7
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.105.5.2.11.4.1.8
When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPQueryState 1.3.6.1.4.1.171.11.105.5.2.11.4.1.9
This object decides if the IGMP query is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IGMPCurrentState 1.3.6.1.4.1.171.11.105.5.2.11.4.1.10
This object indicates the current IGMP query state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), querier(2), non-querier(3)  

swL2IGMPCtrlState 1.3.6.1.4.1.171.11.105.5.2.11.4.1.11
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP function is disabled for this entry. enable(3) - IGMP function is enabled for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

swL2IGMPFastLeaveState 1.3.6.1.4.1.171.11.105.5.2.11.4.1.12
This object indicates the fast-leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP fast-leave function is disabled for this entry. enable(3) - IGMP fast-leave function is enabled for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.105.5.2.11.5
The table contains the number current IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPQueryInfoEntry

swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.105.5.2.11.5.1
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entry are all enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPQueryInfoEntry  

swL2IGMPInfoVid 1.3.6.1.4.1.171.11.105.5.2.11.5.1.1
This object indicates the VID of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.105.5.2.11.5.1.2
This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.105.5.2.11.5.1.3
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoTable 1.3.6.1.4.1.171.11.105.5.2.11.6
The table containing current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of the associated VLAN entries are all enabled. Note that the priority of IGMP table entries is lower than the Filtering Table, i.e. if there is a table hash collision between entries in the IGMP Table and Filtering Table inside the switch's H/W address table, then Filtering Table entry overwrites the colliding entry of the IGMP Table. Also see the swL2FilterMgmt description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPInfoEntry

swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.105.5.2.11.6.1
Information about current IGMP information which was captured by this device, provided that the swL2DevCtrlIGMPSnooping and the swL2IGMPCtrlState of associated VLAN entries are all enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPInfoEntry  

swL2IGMPVid 1.3.6.1.4.1.171.11.105.5.2.11.6.1.1
This object indicates the VID of individual IGMP table entries. It shows the VID IGMP report information captured on the network.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.105.5.2.11.6.1.2
This object identifies group IP addresses which were captured from IGMP packets, on a per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2IGMPMacAddr 1.3.6.1.4.1.171.11.105.5.2.11.6.1.3
This object identifies MAC addresses which correspond to the swL2IGMPGroupIpAddr, on per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

swL2IGMPPortMap 1.3.6.1.4.1.171.11.105.5.2.11.6.1.4
This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string which is indicated by a port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bits corresponding to the port from which a frame is received is irrelevant). The 4 octets represent one unit port according to its logical port. If the unit is less than 32 ports, other ports are not affected and are replaced with zeroes.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.105.5.2.11.6.1.5
This object indicates how many report packets were receive by our device, that correspond with this entry when the IGMP function is enabled on per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPRouterPortTable 1.3.6.1.4.1.171.11.105.5.2.11.7
The information of the router port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPRouterPortEntry

swL2IGMPRouterPortEntry 1.3.6.1.4.1.171.11.105.5.2.11.7.1
The entry of swL2IGMPRouterPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPRouterPortEntry  

swL2IGMPRouterPortVlanid 1.3.6.1.4.1.171.11.105.5.2.11.7.1.1
This object indicates the VLAN ID of the router port entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

swL2IGMPRouterPortVlanName 1.3.6.1.4.1.171.11.105.5.2.11.7.1.2
This object indicates the VLAN name of the router port entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2IGMPRouterPortStaticPortList 1.3.6.1.4.1.171.11.105.5.2.11.7.1.3
This object indicates the static portlist of the router port entry.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPRouterPortDynamicPortList 1.3.6.1.4.1.171.11.105.5.2.11.7.1.4
This object indicates the dynamic portlist of the router port entry.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

swL2IGMPRouterPortForbiddenPortList 1.3.6.1.4.1.171.11.105.5.2.11.7.1.5
This object indicates the forbidden portlist of the router port entry.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanTable 1.3.6.1.4.1.171.11.105.5.2.11.8
The information of the IGMP snooping multicast VLAN table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPMulticastVlanEntry

swL2IGMPMulticastVlanEntry 1.3.6.1.4.1.171.11.105.5.2.11.8.1
The entry of swL2IGMPMulticastVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPMulticastVlanEntry  

swL2IGMPMulticastVlanid 1.3.6.1.4.1.171.11.105.5.2.11.8.1.1
This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..4094  

swL2IGMPMulticastVlanName 1.3.6.1.4.1.171.11.105.5.2.11.8.1.2
This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2IGMPMulticastVlanSourcePort 1.3.6.1.4.1.171.11.105.5.2.11.8.1.3
This object indicate the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanMemberPort 1.3.6.1.4.1.171.11.105.5.2.11.8.1.4
This object indicate the portlist of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanTagMemberPort 1.3.6.1.4.1.171.11.105.5.2.11.8.1.5
This object indicate the portlist of the tag member ports of IGMP snooping multicast VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanState 1.3.6.1.4.1.171.11.105.5.2.11.8.1.6
This object can be enabled or disabled IGMP-snooping multicast VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2IGMPMulticastVlanReplaceSourceIp 1.3.6.1.4.1.171.11.105.5.2.11.8.1.7
The replace source IP of this multicast vlan.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

swL2IGMPMulticastVlanRowStatus 1.3.6.1.4.1.171.11.105.5.2.11.8.1.8
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL2IGMPMulticastVlanRemoveAllMcastAddrListAction 1.3.6.1.4.1.171.11.105.5.2.11.8.1.9
This object indicates if remove all the multicast address list from the IGMP multicast VLAN or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), start(2)  

swL2IGMPMulticastVlanGroupTable 1.3.6.1.4.1.171.11.105.5.2.11.9
The table containing the IGMP snooping multicast VLAN group information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPMulticastVlanGroupEntry

swL2IGMPMulticastVlanGroupEntry 1.3.6.1.4.1.171.11.105.5.2.11.9.1
Information about current IGMP snooping multicast VLAN group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPMulticastVlanGroupEntry  

swL2IGMPMulticastVlanGroupVid 1.3.6.1.4.1.171.11.105.5.2.11.9.1.1
This object indicates the Vid of IGMP snooping multicast VLAN group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPMulticastVlanGroupFromIp 1.3.6.1.4.1.171.11.105.5.2.11.9.1.2
Specifies the multicast address list for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2IGMPMulticastVlanGroupToIp 1.3.6.1.4.1.171.11.105.5.2.11.9.1.3
Specifies the multicast address list for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2IGMPMulticastVlanGroupStatus 1.3.6.1.4.1.171.11.105.5.2.11.9.1.4
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL2TrafficSegTable 1.3.6.1.4.1.171.11.105.5.2.14.1
This table specifies that the port can just forward traffic to the specific port list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrafficSegEntry

swL2TrafficSegEntry 1.3.6.1.4.1.171.11.105.5.2.14.1.1
A list of information which specifies the port with its traffic forwarding list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2TrafficSegEntry  

swL2TrafficSegPort 1.3.6.1.4.1.171.11.105.5.2.14.1.1.1
The port number of the logical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.105.5.2.14.1.1.2
The port list to which the specific port can forward traffic.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2MulticastFilterModeVlanTable 1.3.6.1.4.1.171.11.105.5.2.17.1
A table that contains information about VLAN multicast filter mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2MulticastFilterModeVlanEntry

swL2MulticastFilterModeVlanEntry 1.3.6.1.4.1.171.11.105.5.2.17.1.1
A list of multicast filter mode information for each VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2MulticastFilterModeVlanEntry  

swL2MulticastFilterVid 1.3.6.1.4.1.171.11.105.5.2.17.1.1.1
Indicates VID for each VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

swL2MulticastFilterVlanMode 1.3.6.1.4.1.171.11.105.5.2.17.1.1.2
Specifies multicast filter mode for each VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3)  

swL2LoopDetectCtrl 1.3.6.1.4.1.171.11.105.5.2.18.1
OBJECT IDENTIFIER    

swL2LoopDetectAdminState 1.3.6.1.4.1.171.11.105.5.2.18.1.1
This object indicates the loopback detection status for the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2LoopDetectInterval 1.3.6.1.4.1.171.11.105.5.2.18.1.2
This object indicates the interval value, the range is from 1 to 32767 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..32767  

swL2LoopDetectRecoverTime 1.3.6.1.4.1.171.11.105.5.2.18.1.3
This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000000  

swL2LoopDetectMode 1.3.6.1.4.1.171.11.105.5.2.18.1.4
This object indicates the loopback detection mode for the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER vlan-based(1), port-based(2)  

swL2LoopDetectTrapMode 1.3.6.1.4.1.171.11.105.5.2.18.1.5
This object indicates the loopback detection trap mode for the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), loop-detected(2), loop-cleared(3), both(4)  

swL2LoopDetectPortMgmt 1.3.6.1.4.1.171.11.105.5.2.18.2
OBJECT IDENTIFIER    

swL2LoopDetectPortTable 1.3.6.1.4.1.171.11.105.5.2.18.2.1
The table specifies the loopback detection function specified by port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2LoopDetectPortEntry

swL2LoopDetectPortEntry 1.3.6.1.4.1.171.11.105.5.2.18.2.1.1
The table specifies the loopback detection function specified by port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2LoopDetectPortEntry  

swL2LoopDetectPortIndex 1.3.6.1.4.1.171.11.105.5.2.18.2.1.1.1
This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

swL2LoopDetectPortState 1.3.6.1.4.1.171.11.105.5.2.18.2.1.1.2
This object indicates the loopback detection function state on the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2LoopDetectPortLoopVLAN 1.3.6.1.4.1.171.11.105.5.2.18.2.1.1.3
This object indicates the VLAN list that has detected a loopback.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

swL2LoopDetectPortLoopStatus 1.3.6.1.4.1.171.11.105.5.2.18.2.1.1.4
This object indicates the port status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), loop(2), error(3), none(4)  

swL2Notify 1.3.6.1.4.1.171.11.105.5.2.100.1
OBJECT IDENTIFIER    

swL2NotifyMgmt 1.3.6.1.4.1.171.11.105.5.2.100.1.1
OBJECT IDENTIFIER    

swL2NotifyPrefix 1.3.6.1.4.1.171.11.105.5.2.100.1.2
OBJECT IDENTIFIER    

swL2NotifFirmware 1.3.6.1.4.1.171.11.105.5.2.100.1.2.0
OBJECT IDENTIFIER    

swL2macNotificationSeverity 1.3.6.1.4.1.171.11.105.5.2.100.1.1.1
Indicate the level of macNotification detection.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swL2PortSecurityViolationSeverity 1.3.6.1.4.1.171.11.105.5.2.100.1.1.2
Indicate the level of PortSecurityViolation detection.
Status: current Access: read-write
OBJECT-TYPE    
  AgentNotifyLevel  

swL2macNotification 1.3.6.1.4.1.171.11.105.5.2.100.1.2.0.1
This trap indicates the MAC addresses variation in address table .
Status: current Access: read-write
NOTIFICATION-TYPE    

swL2PortSecurityViolationTrap 1.3.6.1.4.1.171.11.105.5.2.100.1.2.0.2
When the port-security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out.
Status: current Access: read-write
NOTIFICATION-TYPE    

swL2PortLoopOccurred 1.3.6.1.4.1.171.11.105.5.2.100.1.2.0.3
The trap is sent when Port loop occurred.
Status: current Access: read-write
NOTIFICATION-TYPE    

swL2PortLoopRestart 1.3.6.1.4.1.171.11.105.5.2.100.1.2.0.4
The trap is sent when Port loop restart after interval time.
Status: current Access: read-write
NOTIFICATION-TYPE    

swL2VlanLoopOccurred 1.3.6.1.4.1.171.11.105.5.2.100.1.2.0.5
The trap is sent when Port with VID loop occurred.
Status: current Access: read-write
NOTIFICATION-TYPE    

swL2VlanLoopRestart 1.3.6.1.4.1.171.11.105.5.2.100.1.2.0.6
The trap is sent when Port with VID loop restart after interval time.
Status: current Access: read-write
NOTIFICATION-TYPE    

swl2NotificationBidings 1.3.6.1.4.1.171.11.105.5.2.100.1.2.1
OBJECT IDENTIFIER    

swL2macNotifyInfo 1.3.6.1.4.1.171.11.105.5.2.100.1.2.1.1
This object indicates the last time reboot information.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

swL2PortSecurityViolationMac 1.3.6.1.4.1.171.11.105.5.2.100.1.2.1.2
This object indicates the MAC address that violates the port security configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

swL2VlanLoopDetectVID 1.3.6.1.4.1.171.11.105.5.2.100.1.2.1.3
This object indicates the VID that has detected a loopback.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER  

swL2DhcpLocalRelayState 1.3.6.1.4.1.171.11.105.5.2.24.1
This object indicates the status of the DHCP local relay function of the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DhcpLocalRelayVLANTable 1.3.6.1.4.1.171.11.105.5.2.24.2
This table is used to manage the DHCP local relay status for each VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2DhcpLocalRelayVLANEntry

swL2DhcpLocalRelayVLANEntry 1.3.6.1.4.1.171.11.105.5.2.24.2.1
This object lists the current VLANs in the switch and their corresponding DHCP local relay status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2DhcpLocalRelayVLANEntry  

swL2DhcpLocalRelayVLANID 1.3.6.1.4.1.171.11.105.5.2.24.2.1.1
This object shows the VIDs of the current VLANS in the switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

swL2DhcpLocalRelayVLANState 1.3.6.1.4.1.171.11.105.5.2.24.2.1.2
This object indicates the status of the DHCP relay function of the VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PPPoECirIDinsertState 1.3.6.1.4.1.171.11.105.5.2.25.1
This object indicates the status of the PPPoE circuit ID insertion state of the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)