DES3052-L2MGMT-MIB

File: DES3052-L2MGMT-MIB.mib (192540 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI RFC1155-SMI
SNMP-FRAMEWORK-MIB RFC1213-MIB SWPRIMGMT-DES30XXP-MIB

Imported symbols

TEXTUAL-CONVENTION MODULE-IDENTITY OBJECT-TYPE
Unsigned32 Integer32 TimeTicks
IpAddress RowStatus TruthValue
SnmpAdminString DisplayString des3052

Defined Types

VlanId  
INTEGER 1..4094    

PortList  
OCTET STRING Size(0..127)    

MacAddress  
OCTET STRING Size(6)    

SwL2PortInfoEntry  
SEQUENCE    
  swL2PortInfoPortIndex INTEGER
  swL2PortInfoMediumType INTEGER
  swL2PortInfoLinkStatus INTEGER
  swL2PortInfoNwayStatus INTEGER

SwL2PortCtrlEntry  
SEQUENCE    
  swL2PortCtrlPortIndex INTEGER
  swL2PortCtrlPortMediumType INTEGER
  swL2PortCtrlAdminState INTEGER
  swL2PortCtrlNwayState INTEGER
  swL2PortCtrlFlowCtrlState INTEGER
  swL2PortCtrlDescription DisplayString
  swL2PortCtrlAddressLearning INTEGER
  swL2PortCtrlMACNotifyState INTEGER
  swL2PortCtrlMulticastfilter INTEGER
  swL2PortCtrlMDIXState INTEGER

SwL2PortErrEntry  
SEQUENCE    
  swL2PortErrPortIndex INTEGER
  swL2PortErrPortState INTEGER
  swL2PortErrPortStatus INTEGER
  swL2PortErrPortReason INTEGER
  swL2PortErrDescription DisplayString

SwL2QOSBandwidthControlEntry  
SEQUENCE    
  swL2QOSBandwidthPortIndex INTEGER
  swL2QOSBandwidthRxRate INTEGER
  swL2QOSBandwidthTxRate INTEGER
  swL2QOSBandwidthRadiusRxRate INTEGER
  swL2QOSBandwidthRadiusTxRate INTEGER

SwL2QOSSchedulingEntry  
SEQUENCE    
  swL2QOSSchedulingClassIndex INTEGER
  swL2QOSSchedulingMaxWeight INTEGER
  swL2QOSSchedulingMechanism INTEGER

SwL2QOS8021pUserPriorityEntry  
SEQUENCE    
  swL2QOS8021pUserPriorityIndex INTEGER
  swL2QOS8021pUserPriorityClass INTEGER

SwL2QOS8021pDefaultPriorityEntry  
SEQUENCE    
  swL2QOS8021pDefaultPriorityIndex INTEGER
  swL2QOS8021pDefaultPriority INTEGER
  swL2QOS8021pRadiusPriority INTEGER

SwPortTrunkEntry  
SEQUENCE    
  swPortTrunkIndex Integer32
  swPortTrunkMasterPort Integer32
  swPortTrunkPortList PortList
  swPortTrunkType INTEGER
  swPortTrunkActivePort PortList
  swPortTrunkState RowStatus
  swPortTrunkFloodingPort Integer32

SwL2TrunkLACPPortEntry  
SEQUENCE    
  swL2TrunkLACPPortIndex INTEGER
  swL2TrunkLACPPortState INTEGER

SwL2TrunkVLANEntry  
SEQUENCE    
  swL2TrunkVLANPort INTEGER
  swL2TrunkVLANState INTEGER

SwL2IGMPCtrlEntry  
SEQUENCE    
  swL2IGMPCtrlVid INTEGER
  swL2IGMPQueryInterval INTEGER
  swL2IGMPMaxResponseTime INTEGER
  swL2IGMPRobustness INTEGER
  swL2IGMPLastMemberQueryInterval INTEGER
  swL2IGMPHostTimeout INTEGER
  swL2IGMPRouteTimeout INTEGER
  swL2IGMPLeaveTimer INTEGER
  swL2IGMPQueryState INTEGER
  swL2IGMPCurrentState INTEGER
  swL2IGMPCtrlState INTEGER
  swL2IGMPFastLeave INTEGER
  swL2IGMPDynIPMultVlanState INTEGER
  swL2IGMPDynIPMultVlanAge INTEGER

SwL2IGMPQueryInfoEntry  
SEQUENCE    
  swL2IGMPInfoVid INTEGER
  swL2IGMPInfoQueryCount INTEGER
  swL2IGMPInfoTxQueryCount INTEGER

SwL2IGMPInfoEntry  
SEQUENCE    
  swL2IGMPVid INTEGER
  swL2IGMPGroupIpAddr IpAddress
  swL2IGMPMacAddr MacAddress
  swL2IGMPPortMap PortList
  swL2IGMPIpGroupReportCount INTEGER

SwL2IGMPRouterPortEntry  
SEQUENCE    
  swL2IGMPRouterPortVlanid INTEGER
  swL2IGMPRouterPortVlanName SnmpAdminString
  swL2IGMPRouterPortStaticPortList PortList
  swL2IGMPRouterPortDynamicPortList PortList
  swL2IGMPRouterPortForbiddenPortList PortList

SwL2IGMPAccessAuthEntry  
SEQUENCE    
  swL2IGMPAccessAuthPort INTEGER
  swL2IGMPAccessAuthState INTEGER

SwL2IGMPMulticastVlanEntry  
SEQUENCE    
  swL2IGMPMulticastVlanid INTEGER
  swL2IGMPMulticastVlanName DisplayString
  swL2IGMPMulticastVlanSourcePort PortList
  swL2IGMPMulticastVlanMemberPort PortList
  swL2IGMPMulticastVlanTagMemberPort PortList
  swL2IGMPMulticastVlanState INTEGER
  swL2IGMPMulticastVlanReplaceSourceIp IpAddress
  swL2IGMPMulticastVlanRowStatus RowStatus
  swL2IGMPMulticastVlanRemoveAllMcastAddrListAction INTEGER
  swL2IGMPMulticastVlanUntagSourcePort PortList
  swL2IGMPMulticastVlanRemapPriority INTEGER
  swL2IGMPMulticastVlanReplacePriority INTEGER

SwL2IGMPMulticastVlanGroupEntry  
SEQUENCE    
  swL2IGMPMulticastVlanGroupVid INTEGER
  swL2IGMPMulticastVlanGroupFromIp IpAddress
  swL2IGMPMulticastVlanGroupToIp IpAddress
  swL2IGMPMulticastVlanGroupStatus RowStatus

SwL2IGMPv3Entry  
SEQUENCE    
  swL2IGMPv3SourceIPAddr IpAddress
  swL2IGMPv3Forwarding INTEGER
  swL2IGMPv3ExpireTimer INTEGER

SwIGMPSnoopingGroupEntry  
SEQUENCE    
  swIGMPSnoopingGroupVid INTEGER
  swIGMPSnoopingGroupGroupAddr IpAddress
  swIGMPSnoopingGroupSourceAddr IpAddress
  swIGMPSnoopingGroupIncludePortMap PortList
  swIGMPSnoopingGroupExcludePortMap PortList
  swIGMPSnoopingGroupReportCount INTEGER
  swIGMPSnoopingGroupUpTime TimeTicks
  swIGMPSnoopingGroupExpiryTime TimeTicks
  swIGMPSnoopingGroupRouterPorts PortList

SwL2TrafficSegEntry  
SEQUENCE    
  swL2TrafficSegPort INTEGER
  swL2TrafficSegForwardPorts PortList

SwL2PortSecurityControlEntry  
SEQUENCE    
  swL2PortSecurityPortIndex INTEGER
  swL2PortSecurityMaxLernAddr INTEGER
  swL2PortSecurityMode INTEGER
  swL2PortSecurityAdmState INTEGER

SwL2CosPriorityEntry  
SEQUENCE    
  swL2CosPriorityPort INTEGER
  swL2CosPriorityPortPRI INTEGER
  swL2CosPriorityEtherPRI INTEGER
  swL2CosPriorityIpPRI INTEGER
  swL2CosPriorityNone INTEGER

SwL2CosPortPRIEntry  
SEQUENCE    
  swL2CosPortPRIIndex INTEGER
  swL2CosPortPRIClass INTEGER

SwL2CosMacBasePRIEntry  
SEQUENCE    
  swL2CosMacBasePRIIndex MacAddress
  swL2CosMacBasePRIClass INTEGER

SwL2CosTosPRIEntry  
SEQUENCE    
  swL2CosTosPRIIndex INTEGER
  swL2CosTosPRIClass INTEGER

SwL2CosDscpPRIEntry  
SEQUENCE    
  swL2CosDscpPRIIndex INTEGER
  swL2CosDscpPRIClass INTEGER

SwL2DhcpRelayCtrlEntry  
SEQUENCE    
  swL2DhcpRelayCtrlInterfaceName DisplayString
  swL2DhcpRelayCtrlServer IpAddress
  swL2DhcpRelayCtrlState INTEGER

SwL2LoopDetectPortEntry  
SEQUENCE    
  swL2LoopDetectPortIndex INTEGER
  swL2LoopDetectPortState INTEGER
  swL2LoopDetectPortLoopStatus INTEGER

SwL2McastFilterEntry  
SEQUENCE    
  swL2McastFilterProfileIndex INTEGER
  swL2McastFilterProfileName DisplayString
  swL2McastFilterAddOrDelState INTEGER
  swL2McastFilterGroupList DisplayString
  swL2McastFilterStatus RowStatus

SwL2McastFilterPortEntry  
SEQUENCE    
  swL2McastFilterPortGroupPortIndex INTEGER
  swL2McastFilterPortProfileAddOrDelState INTEGER
  swL2McastFilterPortProfileID INTEGER

SwL2McastFilterPortMaxGroupEntry  
SEQUENCE    
  swL2McastFilterPortMaxGroupPortIndex INTEGER
  swL2McastFilterPortMaxGroup INTEGER

SwL2McastFilterPortInfoEntry  
SEQUENCE    
  swL2McastFilterPortInfoPortIndex INTEGER
  swL2McastFilterPortInfoProfileName DisplayString

SwL2VlanAdvertisementEntry  
SEQUENCE    
  swL2VlanIndex INTEGER
  swL2VlanName DisplayString
  swL2VlanAdvertiseState INTEGER

SwL2DhcpLocalRelayVLANEntry  
SEQUENCE    
  swL2DhcpLocalRelayVLANID INTEGER
  swL2DhcpLocalRelayVLANState INTEGER

SwL2FloodMACAutoFDBCtrlEntry  
SEQUENCE    
  swL2FloodMACAutoFDBIPAddress IpAddress
  swL2FloodMACAutoFDBRowStatus RowStatus

SwL2FloodMACFDBEntry  
SEQUENCE    
  swL2FloodMACFDBIndex INTEGER
  swL2FloodMACFDBVID INTEGER
  swL2FloodMACFDBMacAddress MacAddress
  swL2FloodMACFDBStatus INTEGER
  swL2FloodMACFDBTimestamp INTEGER

SwL2FloodMACAutoFDBEntry  
SEQUENCE    
  swL2FloodMACAutoFDBVID INTEGER
  swL2FloodMACAutoFDBMacAddress MacAddress
  swL2FloodMACAutoFDBPort INTEGER
  swL2FloodMACAutoFDBTimestamp INTEGER

Defined Values

swL2MgmtMIB 1.3.6.1.4.1.171.11.63.8.2
The Structure of Layer 2 Network Management Information for enterprise.
MODULE-IDENTITY    

swL2DevMgmt 1.3.6.1.4.1.171.11.63.8.2.1
OBJECT IDENTIFIER    

swL2PortMgmt 1.3.6.1.4.1.171.11.63.8.2.2
OBJECT IDENTIFIER    

swL2QOSMgmt 1.3.6.1.4.1.171.11.63.8.2.3
OBJECT IDENTIFIER    

swL2TrunkMgmt 1.3.6.1.4.1.171.11.63.8.2.4
OBJECT IDENTIFIER    

swPortMirrorPackage 1.3.6.1.4.1.171.11.63.8.2.6
OBJECT IDENTIFIER    

swIGMPPackage 1.3.6.1.4.1.171.11.63.8.2.7
OBJECT IDENTIFIER    

swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.63.8.2.12
OBJECT IDENTIFIER    

swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.63.8.2.15
OBJECT IDENTIFIER    

swL2CosMgmt 1.3.6.1.4.1.171.11.63.8.2.17
OBJECT IDENTIFIER    

swL2DhcpRelayMgmt 1.3.6.1.4.1.171.11.63.8.2.18
OBJECT IDENTIFIER    

swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.63.8.2.20
OBJECT IDENTIFIER    

swL2LoopDetectMgmt 1.3.6.1.4.1.171.11.63.8.2.21
OBJECT IDENTIFIER    

swL2MultiFilter 1.3.6.1.4.1.171.11.63.8.2.22
OBJECT IDENTIFIER    

swL2VlanMgmt 1.3.6.1.4.1.171.11.63.8.2.23
OBJECT IDENTIFIER    

swL2DhcpLocalRelayMgmt 1.3.6.1.4.1.171.11.63.8.2.24
OBJECT IDENTIFIER    

swL2FloodMAC 1.3.6.1.4.1.171.11.63.8.2.25
OBJECT IDENTIFIER    

swL2DevInfo 1.3.6.1.4.1.171.11.63.8.2.1.1
OBJECT IDENTIFIER    

swL2DevInfoFrontPanelLedStatus 1.3.6.1.4.1.171.11.63.8.2.1.1.5
This object is a set of system LED indications. When log in system DES3028/DES3052 which do not support POE, the first two octets is defined as system LED. The first LED is power LED. The second LED is console LED. When log in system DES3028p/DES3052p which support POE, the first four octets are defined as system LED. The first octet is 0x02 and the second octet is 0x01 when in normal mode. Contrarily, the first octet is 0x01 and the second octet is 0x02 when in poe mode. The third octet indicates the power LED. The fourth octet indicates the console LED. The other octets are defined as follow: start on the third or fifth octets separately correspond to system support poe or system which does not support poe indicate the logical port LED (following swL2BasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

swL2DevCtrl 1.3.6.1.4.1.171.11.63.8.2.1.2
OBJECT IDENTIFIER    

swL2DevCtrlSystemReboot 1.3.6.1.4.1.171.11.63.8.2.1.2.1
This object indicates the agent system reboot state. The agent always returns other(1) when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reboot(2), save-config-and-reboot(3), reboot-and-load-factory-default-config(4)  

swL2DevCtrlSystemIP 1.3.6.1.4.1.171.11.63.8.2.1.2.2
This object indicates system ip.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

swL2DevCtrlSubnetMask 1.3.6.1.4.1.171.11.63.8.2.1.2.3
This object indicates system subnet mask.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

swL2DevCtrlDefaultGateway 1.3.6.1.4.1.171.11.63.8.2.1.2.4
This object indicates system default gateway.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

swL2DevCtrlManagementVlanId 1.3.6.1.4.1.171.11.63.8.2.1.2.5
This object controls which Vlan includes system ip. And the Vlan should have been created.
Status: current Access: read-write
OBJECT-TYPE    
  VlanId  

swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.63.8.2.1.2.7
This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.63.8.2.1.2.12
As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), active(2)  

swL2DevCtrlSnmpEnableAuthenTraps 1.3.6.1.4.1.171.11.63.8.2.1.2.13
Indicates whether the SNMP entity is permitted to generate authenticationFailure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authenticationFailure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant across re-initializations of the network management system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlRmonState 1.3.6.1.4.1.171.11.63.8.2.1.2.16
This object can be enabled or disabled RMON.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlIpAutoConfig 1.3.6.1.4.1.171.11.63.8.2.1.2.17
Indicates the status of automatically getting configuration from TFTP server on device
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2MACNotifyState 1.3.6.1.4.1.171.11.63.8.2.1.2.19
This object can enabled or disabled MAC Notification.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.63.8.2.1.2.20
This object indicates the history size of variation MAC in address table. The default value is 1 .
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

swL2MACNotifyInterval 1.3.6.1.4.1.171.11.63.8.2.1.2.21
This object indicates the time interval in second for trigger the MAC notify message.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

swL2DevCtrlLLDPState 1.3.6.1.4.1.171.11.63.8.2.1.2.22
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For the receiving of LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlLLDPForwardMessageState 1.3.6.1.4.1.171.11.63.8.2.1.2.23
When lldp is disabled and lldp forward-message is enabled, the received LLDP Data Units packet will be forwarded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlAsymVlanState 1.3.6.1.4.1.171.11.63.8.2.1.2.24
This object enables or disables the asymmetric VLAN feature of the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IGMPSnoopingMulticastVlanState 1.3.6.1.4.1.171.11.63.8.2.1.2.25
This indicates the global state of the igmp-snoop multicast-vlan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlVLANTrunkState 1.3.6.1.4.1.171.11.63.8.2.1.2.26
This indicates the global state of the VLAN trunking feature of the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2DevCtrlWeb 1.3.6.1.4.1.171.11.63.8.2.1.2.27
OBJECT IDENTIFIER    

swL2DevCtrlWebState 1.3.6.1.4.1.171.11.63.8.2.1.2.27.1
This object controls Web status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.63.8.2.1.2.28
OBJECT IDENTIFIER    

swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.63.8.2.1.2.28.1
This object controls the Telnet status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevAlarm 1.3.6.1.4.1.171.11.63.8.2.1.3
OBJECT IDENTIFIER    

swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.63.8.2.1.3.1
When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.63.8.2.1.3.2
This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled (3), the Topology Change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device does not send the trap if this object value is disabled or in another state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.63.8.2.1.3.3
This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device does not send the trap if this object value is disabled or in another state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortInfoTable 1.3.6.1.4.1.171.11.63.8.2.2.1
A table that contains information about every port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortInfoEntry

swL2PortInfoEntry 1.3.6.1.4.1.171.11.63.8.2.2.1.1
A list of information for each port of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortInfoEntry  

swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.63.8.2.2.1.1.1
This object indicates the module's port number.(1..Max port number in the module)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

swL2PortInfoMediumType 1.3.6.1.4.1.171.11.63.8.2.2.1.1.2
This object indicates the port type: fiber or copper.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER copper(100), fiber(101)  

swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.63.8.2.2.1.1.4
This object indicates the port link status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), link-pass(2), link-fail(3)  

swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.63.8.2.2.1.1.5
This object indicates the port speed and duplex mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), half-10Mbps(2), full-10Mbps(3), half-100Mbps(4), full-100Mbps(5), half-1Gigabps(6), full-1Gigabps(7)  

swL2PortCtrlTable 1.3.6.1.4.1.171.11.63.8.2.2.2
A table that contains control information about every port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortCtrlEntry

swL2PortCtrlEntry 1.3.6.1.4.1.171.11.63.8.2.2.2.1
A list of control information for each port of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortCtrlEntry  

swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.63.8.2.2.2.1.1
This object indicates the module's port number.(1..Max port number in the module)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

swL2PortCtrlPortMediumType 1.3.6.1.4.1.171.11.63.8.2.2.2.1.2
This object indicates the port type: fiber or copper.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER copper(100), fiber(101)  

swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.63.8.2.2.2.1.3
This object decides whether the port is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.63.8.2.2.2.1.4
Choose the port speed, duplex mode, and N-Way function mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nway-auto(1), nway-disabled-10Mbps-Half(2), nway-disabled-10Mbps-Full(3), nway-disabled-100Mbps-Half(4), nway-disabled-100Mbps-Full(5), nway-disabled-1Gigabps-Full(7), nway-disabled-1Gigabps-Full-Master(8), nway-disabled-1Gigabps-Full-Slave(9)  

swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.63.8.2.2.2.1.5
Set the flow control function as enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlDescription 1.3.6.1.4.1.171.11.63.8.2.2.2.1.6
The object describes the ports in text.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2PortCtrlAddressLearning 1.3.6.1.4.1.171.11.63.8.2.2.2.1.7
This object decides whether the address learning is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.63.8.2.2.2.1.8
This object sets each port's MAC notification state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2PortCtrlMulticastfilter 1.3.6.1.4.1.171.11.63.8.2.2.2.1.9
This object decides the multicast packet filtering mode on this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forward-unregistered-groups(2), filter-unregistered-groups(3)  

swL2PortCtrlMDIXState 1.3.6.1.4.1.171.11.63.8.2.2.2.1.10
This object configures the MDIX setting of the port. The value 'other' is for those entries in which MDIX is not applicable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), normal(2), cross(3), other(4)  

swL2PortErrTable 1.3.6.1.4.1.171.11.63.8.2.2.3
A table that contains information about the Err port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortErrEntry

swL2PortErrEntry 1.3.6.1.4.1.171.11.63.8.2.2.3.1
A list of information for the err port of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortErrEntry  

swL2PortErrPortIndex 1.3.6.1.4.1.171.11.63.8.2.2.3.1.1
This object indicates the module's port number.(1..Max port number in the module)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

swL2PortErrPortState 1.3.6.1.4.1.171.11.63.8.2.2.3.1.2
This object decides whether the port state is enabled or disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

swL2PortErrPortStatus 1.3.6.1.4.1.171.11.63.8.2.2.3.1.3
This object decides whether the PortStatus is err-disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), err-disabled(2)  

swL2PortErrPortReason 1.3.6.1.4.1.171.11.63.8.2.2.3.1.4
This object indicates the module which disabled the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER stp-lbd(1), storm-control(2), ddm(3), duld(4)  

swL2PortErrDescription 1.3.6.1.4.1.171.11.63.8.2.2.3.1.5
The object describes the ports in text.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.63.8.2.3.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOSBandwidthControlEntry

swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.63.8.2.3.1.1
A list of information contained in swL2QOSBandwidthControlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2QOSBandwidthControlEntry  

swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.63.8.2.3.1.1.1
Indicates the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..650  

swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.63.8.2.3.1.1.2
Indicates the RX Rate(Mbit/sec) of the specifed port. A value of 1024000 means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 64..1024000  

swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.63.8.2.3.1.1.3
Indicates the TX Rate(Mbit/sec) of the specifed port. A value of 1024000 means no limit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 64..1024000  

swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.63.8.2.3.1.1.4
The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.63.8.2.3.1.1.5
The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.63.8.2.3.2
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOSSchedulingEntry

swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.63.8.2.3.2.1
A list of information contained in the swL2QOSSchedulingTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2QOSSchedulingEntry  

swL2QOSSchedulingClassIndex 1.3.6.1.4.1.171.11.63.8.2.3.2.1.1
Indicates the hardware queue number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

swL2QOSSchedulingMaxWeight 1.3.6.1.4.1.171.11.63.8.2.3.2.1.4
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..55  

swL2QOSSchedulingMechanism 1.3.6.1.4.1.171.11.63.8.2.3.2.1.5
Indicates the mechanism of QOS scheduling.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER strict(1), roundrobin(2), weightfair(3)  

swL2QOSSchedulingMechanismCtrl 1.3.6.1.4.1.171.11.63.8.2.3.5
This object can control QOS scheduling Mechanism.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER strict(1), weightfair(2), none(3)  

swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.63.8.2.3.3
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOS8021pUserPriorityEntry

swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.63.8.2.3.3.1
A list of information contained in the swL2QOS8021pUserPriorityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2QOS8021pUserPriorityEntry  

swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.63.8.2.3.3.1.1
The 802.1p user priority.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.63.8.2.3.3.1.2
The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.63.8.2.3.4
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2QOS8021pDefaultPriorityEntry

swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.63.8.2.3.4.1
A list of information contained in the swL2QOS8021pDefaultPriorityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2QOS8021pDefaultPriorityEntry  

swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.63.8.2.3.4.1.1
Indicates the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..650  

swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.63.8.2.3.4.1.2
The priority value to assign to untagged packets received by the switch ports on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.63.8.2.3.4.1.3
Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swPortTrunkMaxEntries 1.3.6.1.4.1.171.11.63.8.2.4.1
The max entries of the swPortTrunkTable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swPortTrunkMaxPortMembers 1.3.6.1.4.1.171.11.63.8.2.4.2
The max number of ports allowed in a trunk.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swPortTrunkTable 1.3.6.1.4.1.171.11.63.8.2.4.3
This table specifies the port membership for each logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwPortTrunkEntry

swPortTrunkEntry 1.3.6.1.4.1.171.11.63.8.2.4.3.1
A list of information that specifies which port group forms a single logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwPortTrunkEntry  

swPortTrunkIndex 1.3.6.1.4.1.171.11.63.8.2.4.3.1.1
The index of logical port trunk.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..3  

swPortTrunkMasterPort 1.3.6.1.4.1.171.11.63.8.2.4.3.1.2
The object indicates the master port number of the port trunk entry. The first port of the trunk is implicitly configured to be the master logical port. When using a Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

swPortTrunkPortList 1.3.6.1.4.1.171.11.63.8.2.4.3.1.3
Indicate member ports of a logical trunk.
Status: current Access: read-create
OBJECT-TYPE    
  PortList  

swPortTrunkType 1.3.6.1.4.1.171.11.63.8.2.4.3.1.4
This object indicates the type of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER static(1), lacp(2)  

swPortTrunkActivePort 1.3.6.1.4.1.171.11.63.8.2.4.3.1.5
This object indicates the active ports of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

swPortTrunkState 1.3.6.1.4.1.171.11.63.8.2.4.3.1.6
This object indicates the status of this entry. when the state is CreatAndGo (4),the type of trunk is static (1); when the state is CreatAndWait (5), the type of trunk is lacp(2).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swPortTrunkFloodingPort 1.3.6.1.4.1.171.11.63.8.2.4.3.1.7
The flooding port of every trunk.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.63.8.2.4.4
This object configures part of the packet to be examined by the switch when selecting the egress port for transmitting load-sharing data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), mac-source(2), mac-destination(3), mac-source-dest(4)  

swL2TrunkLACPPortTable 1.3.6.1.4.1.171.11.63.8.2.4.5
This table specifies which port group a set of ports (up to 8) is formed into a single logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrunkLACPPortEntry

swL2TrunkLACPPortEntry 1.3.6.1.4.1.171.11.63.8.2.4.5.1
A list of information specifies which port group a set of ports (up to 8) is formed into a single logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2TrunkLACPPortEntry  

swL2TrunkLACPPortIndex 1.3.6.1.4.1.171.11.63.8.2.4.5.1.1
The index of the logical port LACP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkLACPPortState 1.3.6.1.4.1.171.11.63.8.2.4.5.1.2
The state of the logical port LACP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

swL2TrunkVLANTable 1.3.6.1.4.1.171.11.63.8.2.4.6
This table is used to manage the VLAN trunking feature of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrunkVLANEntry

swL2TrunkVLANEntry 1.3.6.1.4.1.171.11.63.8.2.4.6.1
This object is used to configure the VLAN trunking settings for each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2TrunkVLANEntry  

swL2TrunkVLANPort 1.3.6.1.4.1.171.11.63.8.2.4.6.1.1
This object indicates the port being configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrunkVLANState 1.3.6.1.4.1.171.11.63.8.2.4.6.1.2
The state of the logical port LACP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swPortMirrorRxPortList 1.3.6.1.4.1.171.11.63.8.2.6.2
This object indicates the Rx port list of ports to be sniffed.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swPortMirrorTxPortList 1.3.6.1.4.1.171.11.63.8.2.6.3
This object indicates the Tx port list of ports to be sniffed.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swPortMirrorTargetPort 1.3.6.1.4.1.171.11.63.8.2.6.4
This object indicates the switch whose port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to the bridge MIB, etc.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

swPortMirrorState 1.3.6.1.4.1.171.11.63.8.2.6.5
This object indicates the status of this entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.63.8.2.7.1
The maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPMaxIpGroupNumPerVlan 1.3.6.1.4.1.171.11.63.8.2.7.2
The maximum number of multicast IP groups per VLAN in the layer 2 IGMP information table (swL2IGMPQueryInfoTable).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.63.8.2.7.3
The table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If the VLAN mode is disabled, there is only one entry in the table, with index 1. If VLAN is in Port-Based or 802.1q mode, the number of entries can be up to 12, with an index range from 1 to 12.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPCtrlEntry

swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.63.8.2.7.3.1
An entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP captures the switch (swL2DevCtrlIGMPSnooping) is enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPCtrlEntry  

swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.63.8.2.7.3.1.1
This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Based mode, the VID is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the VID setting can vary from 1 to 4094 by management user, and the VID in each entry must be unique in the IGMP Control Table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.63.8.2.7.3.1.2
The frequency at which IGMP Host-Query packets are transmitted on this switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.63.8.2.7.3.1.3
The maximum query response time on this switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..25  

swL2IGMPRobustness 1.3.6.1.4.1.171.11.63.8.2.7.3.1.4
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.63.8.2.7.3.1.5
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..25  

swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.63.8.2.7.3.1.6
The timer value for sending IGMP query packets when none was sent by the host in the LAN. The timer works on a per-VLAN basis. Our device will be activated to send the query message if the timer expires. Please reference RFC2236-1997.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.63.8.2.7.3.1.7
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.63.8.2.7.3.1.8
When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16711450  

swL2IGMPQueryState 1.3.6.1.4.1.171.11.63.8.2.7.3.1.9
This object decides if the IGMP query is enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2IGMPCurrentState 1.3.6.1.4.1.171.11.63.8.2.7.3.1.10
This object indicates the current IGMP query state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), querier(2), non-querier(3)  

swL2IGMPCtrlState 1.3.6.1.4.1.171.11.63.8.2.7.3.1.11
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable (2) - IGMP function is disabled for this entry. enable (3) - IGMP function is enabled for this entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

swL2IGMPFastLeave 1.3.6.1.4.1.171.11.63.8.2.7.3.1.12
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

swL2IGMPDynIPMultVlanState 1.3.6.1.4.1.171.11.63.8.2.7.3.1.13
This object is used to disable or enable the dynamic IP multicast feature in this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2IGMPDynIPMultVlanAge 1.3.6.1.4.1.171.11.63.8.2.7.3.1.14
This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.63.8.2.7.4
The table contains the number of current IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPQueryInfoEntry

swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.63.8.2.7.4.1
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPQueryInfoEntry  

swL2IGMPInfoVid 1.3.6.1.4.1.171.11.63.8.2.7.4.1.1
This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.63.8.2.7.4.1.2
This object indicates the number of query packets received since the IGMP function enabled, on a per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.63.8.2.7.4.1.3
This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiring, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPInfoTable 1.3.6.1.4.1.171.11.63.8.2.7.5
The table containing current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. Also see swL2FilterMgmt description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPInfoEntry

swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.63.8.2.7.5.1
Information about current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPInfoEntry  

swL2IGMPVid 1.3.6.1.4.1.171.11.63.8.2.7.5.1.1
This object indicates the VID of an individual IGMP table entry. It shows the VID of IGMP report information captured on the network.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.63.8.2.7.5.1.2
This object is the identify group IP address which is captured from IGMP packet, on a per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2IGMPMacAddr 1.3.6.1.4.1.171.11.63.8.2.7.5.1.3
This object identifies the MAC address which is corresponding to swL2IGMPGroupIpAddr, on a per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

swL2IGMPPortMap 1.3.6.1.4.1.171.11.63.8.2.7.5.1.4
This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string to indicate the port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0' (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets represent one unit port according to its logic port. If the unit is less than 32 ports, the other port will just fill this value with zeros.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.63.8.2.7.5.1.5
This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2IGMPRouterPortTable 1.3.6.1.4.1.171.11.63.8.2.7.6
The information of the router port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPRouterPortEntry

swL2IGMPRouterPortEntry 1.3.6.1.4.1.171.11.63.8.2.7.6.1
The entry of the swL2IGMPRouterPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPRouterPortEntry  

swL2IGMPRouterPortVlanid 1.3.6.1.4.1.171.11.63.8.2.7.6.1.1
This object indicates the VLAN ID of the router port entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

swL2IGMPRouterPortVlanName 1.3.6.1.4.1.171.11.63.8.2.7.6.1.2
This object indicates the VLAN name of the router port entry.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

swL2IGMPRouterPortStaticPortList 1.3.6.1.4.1.171.11.63.8.2.7.6.1.3
This object indicates the static portlist of the router port entry.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPRouterPortDynamicPortList 1.3.6.1.4.1.171.11.63.8.2.7.6.1.4
This object indicates the dynamic portlist of the router port entry.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

swL2IGMPRouterPortForbiddenPortList 1.3.6.1.4.1.171.11.63.8.2.7.6.1.5
This object indicates the forbidden portlist of the router port entry.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPAccessAuthTable 1.3.6.1.4.1.171.11.63.8.2.7.7
This table is used to manage the IGMP Access Authentication configurations of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPAccessAuthEntry

swL2IGMPAccessAuthEntry 1.3.6.1.4.1.171.11.63.8.2.7.7.1
A list of manageable entities for IGMP Access Authentication. The configuration is done per port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPAccessAuthEntry  

swL2IGMPAccessAuthPort 1.3.6.1.4.1.171.11.63.8.2.7.7.1.1
The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2IGMPAccessAuthState 1.3.6.1.4.1.171.11.63.8.2.7.7.1.2
This object denotes the status of IGMP Access Authentication of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

swL2IGMPMulticastVlanTable 1.3.6.1.4.1.171.11.63.8.2.7.8
Information about the IGMP snooping multicast VLAN table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPMulticastVlanEntry

swL2IGMPMulticastVlanEntry 1.3.6.1.4.1.171.11.63.8.2.7.8.1
The entry of swL2IGMPMulticastVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPMulticastVlanEntry  

swL2IGMPMulticastVlanid 1.3.6.1.4.1.171.11.63.8.2.7.8.1.1
This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..4094  

swL2IGMPMulticastVlanName 1.3.6.1.4.1.171.11.63.8.2.7.8.1.2
This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2IGMPMulticastVlanSourcePort 1.3.6.1.4.1.171.11.63.8.2.7.8.1.3
This object indicates the port list of the source ports of the IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports will be forwarded to the source ports.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanMemberPort 1.3.6.1.4.1.171.11.63.8.2.7.8.1.4
This object indicates the port list of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry and the IGMP control messages received from the member ports will be forwarded to the source ports.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanTagMemberPort 1.3.6.1.4.1.171.11.63.8.2.7.8.1.5
This object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanState 1.3.6.1.4.1.171.11.63.8.2.7.8.1.6
This object can be used to enable or disable the IGMP snooping multicast VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2IGMPMulticastVlanReplaceSourceIp 1.3.6.1.4.1.171.11.63.8.2.7.8.1.7
The replacement source IP of this multicast VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

swL2IGMPMulticastVlanRowStatus 1.3.6.1.4.1.171.11.63.8.2.7.8.1.8
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL2IGMPMulticastVlanRemoveAllMcastAddrListAction 1.3.6.1.4.1.171.11.63.8.2.7.8.1.9
This object indicates whether to remove all the multicast address lists from the IGMP multicast VLAN or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), start(2)  

swL2IGMPMulticastVlanUntagSourcePort 1.3.6.1.4.1.171.11.63.8.2.7.8.1.10
This object indicates the untagged member ports to add to the multicast VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2IGMPMulticastVlanRemapPriority 1.3.6.1.4.1.171.11.63.8.2.7.8.1.11
The priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to 8, the packet's original priority will be used.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..8  

swL2IGMPMulticastVlanReplacePriority 1.3.6.1.4.1.171.11.63.8.2.7.8.1.12
Specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER true(1), false(2)  

swL2IGMPMulticastVlanGroupTable 1.3.6.1.4.1.171.11.63.8.2.7.9
The table containing the IGMP snooping multicast VLAN group information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPMulticastVlanGroupEntry

swL2IGMPMulticastVlanGroupEntry 1.3.6.1.4.1.171.11.63.8.2.7.9.1
Information about the current IGMP snooping multicast VLAN group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPMulticastVlanGroupEntry  

swL2IGMPMulticastVlanGroupVid 1.3.6.1.4.1.171.11.63.8.2.7.9.1.1
This object indicates the VID of the IGMP snooping multicast VLAN group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

swL2IGMPMulticastVlanGroupFromIp 1.3.6.1.4.1.171.11.63.8.2.7.9.1.2
Specifies the multicast address list for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2IGMPMulticastVlanGroupToIp 1.3.6.1.4.1.171.11.63.8.2.7.9.1.3
Specifies the multicast address list for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2IGMPMulticastVlanGroupStatus 1.3.6.1.4.1.171.11.63.8.2.7.9.1.4
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL2IGMPv3Table 1.3.6.1.4.1.171.11.63.8.2.7.10
This table contains the IGMP snooping V3 information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2IGMPv3Entry

swL2IGMPv3Entry 1.3.6.1.4.1.171.11.63.8.2.7.10.1
Information about the current IGMP snooping V3.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2IGMPv3Entry  

swL2IGMPv3SourceIPAddr 1.3.6.1.4.1.171.11.63.8.2.7.10.1.1
This object identifies the source IP addresses from the group where they were captured from. IGMP packets, on a per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2IGMPv3Forwarding 1.3.6.1.4.1.171.11.63.8.2.7.10.1.2
This object identifies if the packets from the source IP addresses are forwarding or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2IGMPv3ExpireTimer 1.3.6.1.4.1.171.11.63.8.2.7.10.1.3
This object identifies the leaving times of the source time.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swIGMPSnoopingGroupTable 1.3.6.1.4.1.171.11.63.8.2.7.11
The table contains the current IGMP snooping group information captured by the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwIGMPSnoopingGroupEntry

swIGMPSnoopingGroupEntry 1.3.6.1.4.1.171.11.63.8.2.7.11.1
Information about the current IGMP snooping group information which has been captured by the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwIGMPSnoopingGroupEntry  

swIGMPSnoopingGroupVid 1.3.6.1.4.1.171.11.63.8.2.7.11.1.1
This object indicates the VID of the individual IGMP snooping group table entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

swIGMPSnoopingGroupGroupAddr 1.3.6.1.4.1.171.11.63.8.2.7.11.1.2
This object identifies the group IP address which has been captured from the IGMP packet, on a per-VLAN basis.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swIGMPSnoopingGroupSourceAddr 1.3.6.1.4.1.171.11.63.8.2.7.11.1.3
This object identifies the source addresses.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swIGMPSnoopingGroupIncludePortMap 1.3.6.1.4.1.171.11.63.8.2.7.11.1.4
This object indicates the port list under INCLUDE mode.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

swIGMPSnoopingGroupExcludePortMap 1.3.6.1.4.1.171.11.63.8.2.7.11.1.5
This object indicates the port list under EXCLUDE mode.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

swIGMPSnoopingGroupReportCount 1.3.6.1.4.1.171.11.63.8.2.7.11.1.6
This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-group basis.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swIGMPSnoopingGroupUpTime 1.3.6.1.4.1.171.11.63.8.2.7.11.1.7
This object indicates how long since the group was detected.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

swIGMPSnoopingGroupExpiryTime 1.3.6.1.4.1.171.11.63.8.2.7.11.1.8
This object indicates the time left before this group will be aged out.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

swIGMPSnoopingGroupRouterPorts 1.3.6.1.4.1.171.11.63.8.2.7.11.1.9
This object indicates the port number of the router ports.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

swL2IGMPDynIpMultMgmt 1.3.6.1.4.1.171.11.63.8.2.7.12
OBJECT IDENTIFIER    

swL2IGMPDynIPMultMaxEntry 1.3.6.1.4.1.171.11.63.8.2.7.12.1
This object specifies the maximum number of entries which can be learned by dynamic IP multicast.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

swL2IGMPSnoopingClearDynIpMult 1.3.6.1.4.1.171.11.63.8.2.7.12.2
OBJECT IDENTIFIER    

swL2IGMPSnoopingClearDynIpMultVID 1.3.6.1.4.1.171.11.63.8.2.7.12.2.1
This object indicates the VLAN identifier where the data driven entries will be removed from.
Status: current Access: read-write
OBJECT-TYPE    
  VlanId  

swL2IGMPSnoopingClearDynIpMultIP 1.3.6.1.4.1.171.11.63.8.2.7.12.2.2
This object indicates the IP address of the IGMP snooping group from which the data driven entries will be removed.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

swL2IGMPSnoopingClearDynIpMultAction 1.3.6.1.4.1.171.11.63.8.2.7.12.2.3
Setting this object will clear the data driven entries. all - Remove all learned data driven groups. VLAN - Clear all data driven entries in the VLAN specified in swIGMPSnoopingClearDynIpMultVID. group - Clear the group with the address specified in swL2IGMPSnoopingClearDynIpMultIP in the VLAN specified in swIGMPSnoopingClearDynIpMultVID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), vlan(2), group(3), other(4)  

swL2TrafficSegTable 1.3.6.1.4.1.171.11.63.8.2.12.1
This table specifies the port just can forward traffic to the specific port list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2TrafficSegEntry

swL2TrafficSegEntry 1.3.6.1.4.1.171.11.63.8.2.12.1.1
A list of information specifies the port with its traffic forward list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2TrafficSegEntry  

swL2TrafficSegPort 1.3.6.1.4.1.171.11.63.8.2.12.1.1.1
The port number of the logical port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.63.8.2.12.1.1.2
The port list that the specific port can forward traffic.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.63.8.2.15.1
The port security feature controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as a static entry. When the learned address number reaches N, any incoming packet without learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned at this port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2PortSecurityControlEntry

swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.63.8.2.15.1.1
A list of information contained in the swL2PortSecurityControlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2PortSecurityControlEntry  

swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.63.8.2.15.1.1.1
Indicates a secured port to lock address learning.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.63.8.2.15.1.1.2
Indicates the allowable number of addresses to be learned at this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

swL2PortSecurityMode 1.3.6.1.4.1.171.11.63.8.2.15.1.1.3
Indicates the mode of locking address. In deleteOnTimeout (3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address is aged out, the number of addresses that can be learned has to be increased by one. In deleteOnReset (4) mode - never age out the locked addresses unless restarting the system to prevent port movement or intrusion.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), permanent(2), deleteOnTimeout(3), deleteOnReset(4)  

swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.63.8.2.15.1.1.4
Indicates an administration state of locking address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

swL2PortSecurityTrapLogState 1.3.6.1.4.1.171.11.63.8.2.15.2
When enabled (2), whenever there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out and the relevant information will be logged in the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

swL2PortSecurityDelCtrl 1.3.6.1.4.1.171.11.63.8.2.15.3
OBJECT IDENTIFIER    

swL2PortSecurityDelVlanName 1.3.6.1.4.1.171.11.63.8.2.15.3.1
Indicates the VLAN name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2PortSecurityDelPort 1.3.6.1.4.1.171.11.63.8.2.15.3.2
Indicates the port. 0 means the function dose not work now.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..768  

swL2PortSecurityDelMacAddress 1.3.6.1.4.1.171.11.63.8.2.15.3.3
Specifies the MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

swL2PortSecurityDelActivity 1.3.6.1.4.1.171.11.63.8.2.15.3.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), start(2)  

swL2CosPriorityCtrl 1.3.6.1.4.1.171.11.63.8.2.17.3
OBJECT IDENTIFIER    

swL2CosPriorityTable 1.3.6.1.4.1.171.11.63.8.2.17.3.1
Used to show and configure per port priority-based QoS features on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2CosPriorityEntry

swL2CosPriorityEntry 1.3.6.1.4.1.171.11.63.8.2.17.3.1.1
A list of information contained in the swL2CosPriorityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2CosPriorityEntry  

swL2CosPriorityPort 1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.1
The port number of CoS Priority.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

swL2CosPriorityPortPRI 1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.2
Indicates the port-priority state for CoS.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

swL2CosPriorityEtherPRI 1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.3
Enable Ethernet frame based priority. When set ether8021p (2), enable 802.1p QoS; When set macBase (3), enable MAC-based QoS; When set disable (1), disable Ethernet frame based priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), ether8021p(2), macBase(3)  

swL2CosPriorityIpPRI 1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.4
Enable IP priority QoS. When set tos (2), enable TOS based QoS; When set dscp (3), enable DSCP based QoS; When set disable (1), disable IP priority QoS.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), tos(2), dscp(3)  

swL2CosPriorityNone 1.3.6.1.4.1.171.11.63.8.2.17.3.1.1.5
When read, it always returns invalid (2); when write valid (1), it disables all priority in this table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

swL2CosPortPRITable 1.3.6.1.4.1.171.11.63.8.2.17.3.2
Used to show port-to-class mappings and map specific port to one of the hardware queues available on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2CosPortPRIEntry

swL2CosPortPRIEntry 1.3.6.1.4.1.171.11.63.8.2.17.3.2.1
A list of information contained in the swL2CosPortPRITable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2CosPortPRIEntry  

swL2CosPortPRIIndex 1.3.6.1.4.1.171.11.63.8.2.17.3.2.1.1
Indicates the CoS Priority PortPRI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

swL2CosPortPRIClass 1.3.6.1.4.1.171.11.63.8.2.17.3.2.1.2
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set one, you must have administrator privileges. And you can set a value of 0 or 3 only, you can't set a value 1 or 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

swL2CosMacBasePRITable 1.3.6.1.4.1.171.11.63.8.2.17.3.3
Used to show MAC priority map to traffic class and map the destination MAC address in incoming packet to one of the hardware queues available on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2CosMacBasePRIEntry

swL2CosMacBasePRIEntry 1.3.6.1.4.1.171.11.63.8.2.17.3.3.1
A list of information contained in the swL2CosMacBasePRITable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2CosMacBasePRIEntry  

swL2CosMacBasePRIIndex 1.3.6.1.4.1.171.11.63.8.2.17.3.3.1.1
Indicates the CoS Priority MacBasePRI.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

swL2CosMacBasePRIClass 1.3.6.1.4.1.171.11.63.8.2.17.3.3.1.2
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set one, you must have administrator privileges.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

swL2CosTosPRITable 1.3.6.1.4.1.171.11.63.8.2.17.3.4
Used to show TOS value to traffic class mapping and map the TOS value in the IP header of incoming packet to one of the four hardware queues available on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2CosTosPRIEntry

swL2CosTosPRIEntry 1.3.6.1.4.1.171.11.63.8.2.17.3.4.1
A list of information contained in the swL2CosTosPRITable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2CosTosPRIEntry  

swL2CosTosPRIIndex 1.3.6.1.4.1.171.11.63.8.2.17.3.4.1.1
Indicates the CoS Priority TosPRI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

swL2CosTosPRIClass 1.3.6.1.4.1.171.11.63.8.2.17.3.4.1.2
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set one, you must have administrator privileges.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

swL2CosDscpPRITable 1.3.6.1.4.1.171.11.63.8.2.17.3.5
Used to show DSCP value to traffic class mapping and map the DSCP value in the IP header of incoming packet to one of the hardware queues available on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2CosDscpPRIEntry

swL2CosDscpPRIEntry 1.3.6.1.4.1.171.11.63.8.2.17.3.5.1
A list of information contained in the swL2CosDscpPRITable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2CosDscpPRIEntry  

swL2CosDscpPRIIndex 1.3.6.1.4.1.171.11.63.8.2.17.3.5.1.1
Indicates the CoS Priority DscpPRI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

swL2CosDscpPRIClass 1.3.6.1.4.1.171.11.63.8.2.17.3.5.1.2
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set one, you must have administrator privileges.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

swL2DhcpRelayState 1.3.6.1.4.1.171.11.63.8.2.18.1
This object indicates whether the DHCP relay function is enabled or disabled.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DhcpRelayHopCount 1.3.6.1.4.1.171.11.63.8.2.18.2
This object indicates the maximum number of router hops that the DHCP packets can cross.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

swL2DhcpRelayTimeThreshold 1.3.6.1.4.1.171.11.63.8.2.18.3
This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

swL2DhcpRelayOption82State 1.3.6.1.4.1.171.11.63.8.2.18.4
This object indicates DHCP relay agent information option 82 function is enabled or disabled.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DhcpRelayOption82Check 1.3.6.1.4.1.171.11.63.8.2.18.5
This object indicates the checking mechanism of DHCP relay agent information option 82 is enabled or disabled.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DhcpRelayOption82Policy 1.3.6.1.4.1.171.11.63.8.2.18.6
This object indicates the reforwarding policy of DHCP relay agent information option 82. replace (1) - Replace the exiting option 82 field in messages. drop (2) - Discard messages with existing option 82 field. keep (3) - Retain the existing option 82 field in messages.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)  

swL2DhcpRelayCtrlTable 1.3.6.1.4.1.171.11.63.8.2.18.7
This table specifies the IP address as a destination to forward (relay) DHCP packets to.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2DhcpRelayCtrlEntry

swL2DhcpRelayCtrlEntry 1.3.6.1.4.1.171.11.63.8.2.18.7.1
A list of information specifies the IP address as a destination to forward (relay) DHCP packets to.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SwL2DhcpRelayCtrlEntry  

swL2DhcpRelayCtrlInterfaceName 1.3.6.1.4.1.171.11.63.8.2.18.7.1.1
The name of the IP interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..12)  

swL2DhcpRelayCtrlServer 1.3.6.1.4.1.171.11.63.8.2.18.7.1.2
The DHCP server IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

swL2DhcpRelayCtrlState 1.3.6.1.4.1.171.11.63.8.2.18.7.1.3
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) - Writing this value to the object, and then the corresponding entry will be removed from the table. valid (3) - This entry resides in the table.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), valid(3)  

swL2MgmtMIBTrapPrefix 1.3.6.1.4.1.171.11.63.8.2.20.0
OBJECT IDENTIFIER    

swL2PortSecurityViolationTrap 1.3.6.1.4.1.171.11.63.8.2.20.0.1
When the port-security trap is enabled, if there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out.
Status: current Access: read-write
NOTIFICATION-TYPE    

swL2macNotification 1.3.6.1.4.1.171.11.63.8.2.20.0.2
This trap indicates the MAC address variations in the address table.
Status: current Access: read-write
NOTIFICATION-TYPE    

swL2FloodMacDetectedTrap 1.3.6.1.4.1.171.11.63.8.2.20.0.3
If theres a new flooding MAC is detected, a trap will be sent out.
Status: current Access: read-write
NOTIFICATION-TYPE    

swL2PortLoopOccurred 1.3.6.1.4.1.171.11.63.8.2.20.0.4
The trap is sent when a Port loop occurs.
Status: current Access: read-write
NOTIFICATION-TYPE    

swL2PortLoopRestart 1.3.6.1.4.1.171.11.63.8.2.20.0.5
The trap is sent when a Port loop restarts after the interval time.
Status: current Access: read-write
NOTIFICATION-TYPE    

swl2PortSecurityBindings 1.3.6.1.4.1.171.11.63.8.2.20.1
OBJECT IDENTIFIER    

swL2PortSecurityViolationMac 1.3.6.1.4.1.171.11.63.8.2.20.1.1
This object indicates the MAC address that violates the port security configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

swl2NotificationBindings 1.3.6.1.4.1.171.11.63.8.2.20.2
OBJECT IDENTIFIER    

swL2macNotifyInfo 1.3.6.1.4.1.171.11.63.8.2.20.2.1
This object indicates the last time reboot information.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

swL2FloodMacDetectedMacVid 1.3.6.1.4.1.171.11.63.8.2.20.2.2
This object indicates the VID of the flooding MAC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

swL2FloodMacDetectedMacAddress 1.3.6.1.4.1.171.11.63.8.2.20.2.3
This object indicates the MAC address of the flooding MAC
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

swL2LoopDetectCtrl 1.3.6.1.4.1.171.11.63.8.2.21.1
OBJECT IDENTIFIER    

swL2LoopDetectAdminState 1.3.6.1.4.1.171.11.63.8.2.21.1.1
This object indicates the loopback detection status for the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2LoopDetectInterval 1.3.6.1.4.1.171.11.63.8.2.21.1.2
This object indicates the interval value, the range is from 1 to 32767 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..32767  

swL2LoopDetectRecoverTime 1.3.6.1.4.1.171.11.63.8.2.21.1.3
This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000000  

swL2LoopDetectTrapMode 1.3.6.1.4.1.171.11.63.8.2.21.1.5
This object indicates the loopback detection trap mode for the system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), loop-detected(2), loop-cleared(3), both(4)  

swL2LoopDetectPortMgmt 1.3.6.1.4.1.171.11.63.8.2.21.2
OBJECT IDENTIFIER    

swL2LoopDetectPortTable 1.3.6.1.4.1.171.11.63.8.2.21.2.1
The table specifies the loopback detection function specified by port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2LoopDetectPortEntry

swL2LoopDetectPortEntry 1.3.6.1.4.1.171.11.63.8.2.21.2.1.1
The table specifies the loopback detection function specified by port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2LoopDetectPortEntry  

swL2LoopDetectPortIndex 1.3.6.1.4.1.171.11.63.8.2.21.2.1.1.1
This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

swL2LoopDetectPortState 1.3.6.1.4.1.171.11.63.8.2.21.2.1.1.2
This object indicates the loopback detection function state on the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2LoopDetectPortLoopStatus 1.3.6.1.4.1.171.11.63.8.2.21.2.1.1.4
This object indicates the port status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), loop(2), error(3)  

swL2McastFilterTable 1.3.6.1.4.1.171.11.63.8.2.22.2
A table that contains information about the multicast filter address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2McastFilterEntry

swL2McastFilterEntry 1.3.6.1.4.1.171.11.63.8.2.22.2.1
A list of multicast filter mode information for each profile ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2McastFilterEntry  

swL2McastFilterProfileIndex 1.3.6.1.4.1.171.11.63.8.2.22.2.1.1
index for each profile
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

swL2McastFilterProfileName 1.3.6.1.4.1.171.11.63.8.2.22.2.1.2
The multicast filter description.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

swL2McastFilterAddOrDelState 1.3.6.1.4.1.171.11.63.8.2.22.2.1.3
The control multicast filter address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), delete(3)  

swL2McastFilterGroupList 1.3.6.1.4.1.171.11.63.8.2.22.2.1.4
The multicast filter address group list.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

swL2McastFilterStatus 1.3.6.1.4.1.171.11.63.8.2.22.2.1.5
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL2McastFilterPortTable 1.3.6.1.4.1.171.11.63.8.2.22.3
A table that is used to bind port to profile ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2McastFilterPortEntry

swL2McastFilterPortEntry 1.3.6.1.4.1.171.11.63.8.2.22.3.1
A list of information that is used to bind port to profile ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2McastFilterPortEntry  

swL2McastFilterPortGroupPortIndex 1.3.6.1.4.1.171.11.63.8.2.22.3.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2McastFilterPortProfileAddOrDelState 1.3.6.1.4.1.171.11.63.8.2.22.3.1.2
The control multicast filter profile.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), delete(3)  

swL2McastFilterPortProfileID 1.3.6.1.4.1.171.11.63.8.2.22.3.1.3
This object indicates the profile ID of this entry. When read, it is always 0. When set, 0 can not be set.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..24  

swL2McastFilterPortMaxGroupTable 1.3.6.1.4.1.171.11.63.8.2.22.4
A table that contains information about the max group number based on port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2McastFilterPortMaxGroupEntry

swL2McastFilterPortMaxGroupEntry 1.3.6.1.4.1.171.11.63.8.2.22.4.1
A list of max group number information for each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2McastFilterPortMaxGroupEntry  

swL2McastFilterPortMaxGroupPortIndex 1.3.6.1.4.1.171.11.63.8.2.22.4.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2McastFilterPortMaxGroup 1.3.6.1.4.1.171.11.63.8.2.22.4.1.2
The max group numbers. The default is 256.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

swL2McastFilterPortInfoTable 1.3.6.1.4.1.171.11.63.8.2.22.5
A table that contains information about all of the multicast groups for the ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2McastFilterPortInfoEntry

swL2McastFilterPortInfoEntry 1.3.6.1.4.1.171.11.63.8.2.22.5.1
A list of information about all of the multicast groups for each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2McastFilterPortInfoEntry  

swL2McastFilterPortInfoPortIndex 1.3.6.1.4.1.171.11.63.8.2.22.5.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2McastFilterPortInfoProfileName 1.3.6.1.4.1.171.11.63.8.2.22.5.1.2
The multicast filter address profile Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

swL2VlanAdvertisementTable 1.3.6.1.4.1.171.11.63.8.2.23.1
A table containing the advertisement state for each VLAN configured into the device by (local or network) management.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2VlanAdvertisementEntry

swL2VlanAdvertisementEntry 1.3.6.1.4.1.171.11.63.8.2.23.1.1
The advertisement state for each VLAN configured into the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2VlanAdvertisementEntry  

swL2VlanIndex 1.3.6.1.4.1.171.11.63.8.2.23.1.1.1
The VLAN-ID or other identifier referring to this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

swL2VlanName 1.3.6.1.4.1.171.11.63.8.2.23.1.1.2
An administratively assigned string, which may be used to identify the VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

swL2VlanAdvertiseState 1.3.6.1.4.1.171.11.63.8.2.23.1.1.3
This object indicates the advertise status of this VLAN entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2VlanMultiplyMgmt 1.3.6.1.4.1.171.11.63.8.2.23.2
OBJECT IDENTIFIER    

swL2VlanMultiplyVlanList 1.3.6.1.4.1.171.11.63.8.2.23.2.1
This object specifies the VLAN ID List.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

swL2VlanMultiplyAdvertisement 1.3.6.1.4.1.171.11.63.8.2.23.2.2
This object specifies the advertisement state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), enabled(2), disabled(3)  

swL2VlanMultiplyPortList 1.3.6.1.4.1.171.11.63.8.2.23.2.3
Specifies the port list.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

swL2VlanMultiplyPortListAction 1.3.6.1.4.1.171.11.63.8.2.23.2.4
Specifies the action for the port list which specified by swL2VlanMultiplyPortList.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), add-tagged(2), add-untagged(3), add-forbidden(4), delete(5)  

swL2VlanMultiplyAction 1.3.6.1.4.1.171.11.63.8.2.23.2.5
Specifies the action for VLANs. other: no action. create: the VLANs specified by swL2VlanMultiplyVlanList would be created at a time. configure: the VLANs specified by swL2VlanMultiplyVlanList would be configured at a time. delete: the VLANs specified by swL2VlanMultiplyVlanList would be deleted at a time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), create(2), configure(3), delete(4)  

swL2DhcpLocalRelayState 1.3.6.1.4.1.171.11.63.8.2.24.1
This object indicates the status of the DHCP local relay function of the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2DhcpLocalRelayVLANTable 1.3.6.1.4.1.171.11.63.8.2.24.2
This table is used to manage the DHCP local relay status for each VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2DhcpLocalRelayVLANEntry

swL2DhcpLocalRelayVLANEntry 1.3.6.1.4.1.171.11.63.8.2.24.2.1
This object lists the current VLANs in the switch and their corresponding DHCP local relay status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2DhcpLocalRelayVLANEntry  

swL2DhcpLocalRelayVLANID 1.3.6.1.4.1.171.11.63.8.2.24.2.1.1
This object shows the VIDs of the current VLANS in the switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

swL2DhcpLocalRelayVLANState 1.3.6.1.4.1.171.11.63.8.2.24.2.1.2
This object indicates the status of the DHCP relay function of the VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

swL2FloodMACMgmt 1.3.6.1.4.1.171.11.63.8.2.25.1
OBJECT IDENTIFIER    

swL2FloodMACGlobalSettings 1.3.6.1.4.1.171.11.63.8.2.25.1.1
OBJECT IDENTIFIER    

swL2FloodMACState 1.3.6.1.4.1.171.11.63.8.2.25.1.1.1
This object indicates the status of Flooding MAC function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2FloodMACLogState 1.3.6.1.4.1.171.11.63.8.2.25.1.1.2
This object indicates whether logs are generated when a flooding MAC is detected.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2FloodMACTrapState 1.3.6.1.4.1.171.11.63.8.2.25.1.1.3
This object indicates whether traps are generated when a flooding MAC is detected.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swL2FloodMACClearFDB 1.3.6.1.4.1.171.11.63.8.2.25.1.1.4
When set to start(2), this object will clear the entries of swL2FloodMACFDBTable. After the device finishes clearing the entries, it will return to its default value, no-action(1). Setting this object to no-action(1) will not have any effect.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-action(1), start(2)  

swL2FloodMACAutoFDBCtrlTable 1.3.6.1.4.1.171.11.63.8.2.25.1.2
A table containing a list of configured IP addresses to which the Auto FDB function will discover the corresponding VLAN, MAC address and port and have a corresponding static FDB entry created automatically.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2FloodMACAutoFDBCtrlEntry

swL2FloodMACAutoFDBCtrlEntry 1.3.6.1.4.1.171.11.63.8.2.25.1.2.1
Information containing the configured Auto FDB IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2FloodMACAutoFDBCtrlEntry  

swL2FloodMACAutoFDBIPAddress 1.3.6.1.4.1.171.11.63.8.2.25.1.2.1.1
The Auto FDB IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

swL2FloodMACAutoFDBRowStatus 1.3.6.1.4.1.171.11.63.8.2.25.1.2.1.2
This object indicates the status of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

swL2FloodMACInfo 1.3.6.1.4.1.171.11.63.8.2.25.2
OBJECT IDENTIFIER    

swL2FloodMACFDBTable 1.3.6.1.4.1.171.11.63.8.2.25.2.1
A table containing a list of current and historical flooding MAC entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2FloodMACFDBEntry

swL2FloodMACFDBEntry 1.3.6.1.4.1.171.11.63.8.2.25.2.1.1
Information containing the flooding MAC address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2FloodMACFDBEntry  

swL2FloodMACFDBIndex 1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.1
The hardware address table index of the flooding MAC entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

swL2FloodMACFDBVID 1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.2
The VLAN identifier of the flooding MAC entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4094  

swL2FloodMACFDBMacAddress 1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.3
The MAC address of the flooding MAC entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

swL2FloodMACFDBStatus 1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.4
The status of the flooding MAC entry. When the value is 'active', this means the entry is currently present in the hardware address table, otherwise, the value is 'inactive'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

swL2FloodMACFDBTimestamp 1.3.6.1.4.1.171.11.63.8.2.25.2.1.1.5
A number that correlates to a relative time the entry was detected by the Flooding MAC function.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2FloodMACAutoFDBTable 1.3.6.1.4.1.171.11.63.8.2.25.2.2
A table containing the discovered VLAN, MAC address and port of the host with an IP address created in swL2FloodMACAutoFDBCtrlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwL2FloodMACAutoFDBEntry

swL2FloodMACAutoFDBEntry 1.3.6.1.4.1.171.11.63.8.2.25.2.2.1
Information containing the discovered VLAN, MAC address and port of an Auto FDB entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwL2FloodMACAutoFDBEntry  

swL2FloodMACAutoFDBVID 1.3.6.1.4.1.171.11.63.8.2.25.2.2.1.1
The VLAN identifier of Auto FDB entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

swL2FloodMACAutoFDBMacAddress 1.3.6.1.4.1.171.11.63.8.2.25.2.2.1.2
The MAC address of the Auto FDB entry.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

swL2FloodMACAutoFDBPort 1.3.6.1.4.1.171.11.63.8.2.25.2.2.1.3
The port number of the Auto FDB entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

swL2FloodMACAutoFDBTimestamp 1.3.6.1.4.1.171.11.63.8.2.25.2.2.1.4
A number that represents the relative time when the Auto FDB learned this entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER