CXUDRV-MIB
File:
CXUDRV-MIB.mib (4161 bytes)
Imported modules
Imported symbols
Defined Types
| UdrvEntry |
|
| SEQUENCE |
|
|
|
| |
udrvSlotNumberIndex |
INTEGER |
|
| |
udrvClearStat |
INTEGER |
|
| |
udrvPortUp |
INTEGER |
|
| |
udrvPortReset |
INTEGER |
|
| |
udrvPortStatus |
INTEGER |
|
| |
udrvFebe |
Counter |
|
| |
udrvNebe |
Counter |
|
| |
udrvActivation |
Counter |
|
| |
udrvDeactivation |
Counter |
|
| |
udrvTransition |
Counter |
|
Defined Values
| udrvTable |
1.3.6.1.4.1.495.2.1.6.41.10 |
| A table containing statistics of the U interface transceiver driver. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
UdrvEntry |
|
| udrvEntry |
1.3.6.1.4.1.495.2.1.6.41.10.1 |
| The parameters for a specific ISDN U-Interface daughter card. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UdrvEntry |
|
|
| udrvSlotNumberIndex |
1.3.6.1.4.1.495.2.1.6.41.10.1.1 |
| Indicates the row containing objects for controlling (or monitoring) an
I/O card in the CX900.
Range of Values: 1-6
Default Value: none |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..6 |
|
| udrvClearStat |
1.3.6.1.4.1.495.2.1.6.41.10.1.20 |
| Clears the statistics counter for this I/O card.
Options:
clearStats : clears statistics
Default value: none |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| udrvPortUp |
1.3.6.1.4.1.495.2.1.6.41.10.1.21 |
| Brings up the port on this I/O card.
Options:
portUp: forces port into 'up' state
Default Value: none |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| udrvPortReset |
1.3.6.1.4.1.495.2.1.6.41.10.1.23 |
| Resets the port on this I/O card.
Options:
portReset: forces port to reset
Default Value: none |
| Status: mandatory |
Access: write-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| udrvPortStatus |
1.3.6.1.4.1.495.2.1.6.41.10.1.30 |
| Indicates the status of the port on this I/O card.
Options:
portDown (1): port is down
portUp (2): port is up
Default Value: none |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
portDown(1), portUp(2) |
|
| udrvFebe |
1.3.6.1.4.1.495.2.1.6.41.10.1.40 |
| Indicates the number of far-end block errors received by this I/O card.
Range of Values: 0-65, 535
Default Value: none |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| udrvNebe |
1.3.6.1.4.1.495.2.1.6.41.10.1.41 |
| Indicates the number of near-end block errors received by this I/O card.
Range of Values: 0-65, 535
Default Value: none |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| udrvActivation |
1.3.6.1.4.1.495.2.1.6.41.10.1.42 |
| Indicates the number of activation requests received by this I/O card.
Range of Values: 0-4, 294, 967, 295
Default Value: none |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| udrvDeactivation |
1.3.6.1.4.1.495.2.1.6.41.10.1.43 |
| Indicates the number of deactivation requests received by this I/O card.
Range of Values: 0-4, 294, 967, 295
Default Value: none |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|
| udrvTransition |
1.3.6.1.4.1.495.2.1.6.41.10.1.44 |
| Indicates the number of down-to-up or up-to-down transitions that have
occurred on this I/O card's port.
Range of Values: 0-4, 294, 967, 295
Default Value: none |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter |
|
|