CXFLT-IPX-MIB
File:
CXFLT-IPX-MIB.mib (5191 bytes)
Imported modules
Imported symbols
Defined Types
CxFltIpxAddrEntry |
|
SEQUENCE |
|
|
|
|
cxFltIpxIndex |
INTEGER |
|
|
cxFltIpxSrcAddr |
NetNumber |
|
|
cxFltIpxDstAddr |
NetNumber |
|
|
cxFltIpxParameter |
INTEGER |
|
|
cxFltIpxRowStatus |
INTEGER |
|
Defined Values
cxFltIpxAddrTable |
1.3.6.1.4.1.495.2.1.6.22.1 |
Provides the filtering/forwarding information for each IPX address. Each
entry (row) in the table corresponds to a specific IPX address. Some of
the values in a row may be modified. If additional IPX addresses are
required they may be added. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CxFltIpxAddrEntry |
|
cxFltIpxAddrEntry |
1.3.6.1.4.1.495.2.1.6.22.1.1 |
Provides the filtering/forwarding information for a specific IPX
address. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CxFltIpxAddrEntry |
|
|
cxFltIpxIndex |
1.3.6.1.4.1.495.2.1.6.22.1.1.1 |
Identifies the number used to index entries on the IPX
filtering/forwarding table. The number provides access to all
filtering/forwarding information for a source IPX address, its associated
destination address, and filtering/forwarding parameter.
Range of Values: 1-32
Default Value: None
Configuration Changed: administrative |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
cxFltIpxSrcAddr |
1.3.6.1.4.1.495.2.1.6.22.1.1.2 |
Determines the source IPX address (network number) used for
filtering/forwarding. This address corresponds to a destination address in
cxFltIpxDstAddr of this table. The object cxFltIpxParameter determines
whether data is filtered or forwarded from the source address to the
destination address.
This number must be entered as 8 hexadecimal characters (four octets), for
example 0xAB12CD34. The 0x must be present in every number; it indicates
that the number is a hex number and is not counted as one of the octets.
The x must be lowercase; the other characters are not case sensitive.
Default Value: None
Range of Values: 4 octets, each character ranging from 00 to FF
Configuration Changed: administrative |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
NetNumber |
|
|
cxFltIpxDstAddr |
1.3.6.1.4.1.495.2.1.6.22.1.1.3 |
Determines the destination IPX address (network number). This address
corresponds to a source address in cxFltIpxSrcAddr on this table. The
object cxFltIpxParameter determines whether data is filtered or forwarded
from the source address to this destination address.
The address is an IPX network number. This number must be entered as 8
hexadecimal characters (four octets), for example 0xAB12CD34. The 0x must
be present in every number; it indicates that the number is a hex number
and is not counted as one of the octets. The x must be lowercase; the
other characters are not case sensitive.
Range of Values: 4 octets, each character ranging from 00 to FF
Default Value: None
Configuration Changed: administrative |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
NetNumber |
|
|
cxFltIpxParameter |
1.3.6.1.4.1.495.2.1.6.22.1.1.4 |
Determines the filtering/forwarding action and the priority processing
for data sent from a source IPX address (cxFltIpxSrcAddr) to a destination
IPX address (cxFltIpxDstAddr).
Options:
discard (1)
forward (2)
priority-low (3)
priority-high (4)
Default Value: discard (1)
Configuration Changed: administrative |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
discard(1), forward(2), priority-low(3), priority-high(4) |
|
cxFltIpxRowStatus |
1.3.6.1.4.1.495.2.1.6.22.1.1.5 |
Determines the status of the objects in a table row.
Options:
invalid (1): row is flagged, after the next reset, values are disabled and
the row is deleted from the table.
valid (2): values are enabled
Default Value: valid (2)
Configuration Changed: administrative |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2) |
|