CXCFG-BR-MIB
File:
CXCFG-BR-MIB.mib (11674 bytes)
Imported modules
Imported symbols
Defined Types
| CxCfgDot1dBasePortEntry |
|
| SEQUENCE |
|
|
|
| |
cxCfgDot1dBasePort |
INTEGER |
|
| |
cxCfgDot1dBasePortIfIndex |
INTEGER |
|
| |
cxCfgDot1dBasePortSubnetworkSapAlias |
Alias |
|
| |
cxCfgDot1dBasePortRowStatus |
INTEGER |
|
| |
cxCfgDot1dBasePortState |
INTEGER |
|
| |
cxCfgDot1dBasePortPriority |
INTEGER |
|
| CxCfgSrBasePortEntry |
|
| SEQUENCE |
|
|
|
| |
cxCfgSrBasePort |
INTEGER |
|
| |
cxCfgSrBasePortIfIndex |
INTEGER |
|
| |
cxCfgSrBasePortSubnetworkSapAlias |
Alias |
|
| |
cxCfgSrBasePortRowStatus |
INTEGER |
|
| |
cxCfgSrBasePortState |
INTEGER |
|
| |
cxCfgSrBasePortPriority |
INTEGER |
|
Defined Values
| cxCfgDot1dBaseNumOfDBFilterEntries |
1.3.6.1.4.1.495.2.1.6.14.1 |
| Determines the number of entries in the filtering database. Available RAM
is the parameter.
Range of Values: None
Default Value: None
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| cxCfgDot1dBaseNumOfStaticDBFilterEntries |
1.3.6.1.4.1.495.2.1.6.14.2 |
| Determines the number of static entries in the filtering database.
Available RAM is the parameter.
Range of Values: None
Default Value: None
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| cxCfgDot1dBasePortTable |
1.3.6.1.4.1.495.2.1.6.14.3 |
| A table that contains basic information about every port that is associated
with this bridge. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CxCfgDot1dBasePortEntry |
|
| cxCfgDot1dBasePortEntry |
1.3.6.1.4.1.495.2.1.6.14.3.1 |
| Contains configuration information for each port of the bridge. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CxCfgDot1dBasePortEntry |
|
|
| cxCfgDot1dBasePort |
1.3.6.1.4.1.495.2.1.6.14.3.1.1 |
| Displays the port number.
Options:
The acceptable values depend on the type of device that you are configuring.
In the CX900 architecture:
11, 21, 31, 41, 51, 61 or 71. The first digit identifies the slot number
the I/O board resides in, the second digit identifies the number of the port
on the I/O board.
In the CX1000 architecture:
Accepts only the value '1'. The LAN module only supports 1 port per I/O
board. You distinguish between multiple I/O boards by specifying the slot
number of the I/O board using another object.
Default Value: 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| cxCfgDot1dBasePortIfIndex |
1.3.6.1.4.1.495.2.1.6.14.3.1.2 |
| Displays the table row that contains configuration or monitoring objects
for a specific type of physical interface.
Range of Values: From 1 to the total number of entries in the
Interface Table.
Default Value: '0' indicates there is no corresponding entry in the
Interface Table for this port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| cxCfgDot1dBasePortSubnetworkSapAlias |
1.3.6.1.4.1.495.2.1.6.14.3.1.3 |
| Specifies a name (alias) for the physical or convergence port to which this
port binds in order to establish a circuit for transmission. This value must
match a physical or convergence port's alias, as defined by the
cxLanIoPortAlias object in the cxLanIoPortTable or by the object
cxConvPortAlias in the cxConvTable.
Range of Values: From 1 to 32 alphanumeric characters. You can use any
combination of letters and numbers however, you cannot use blank spaces.
Use a dash or underscore as a delimiter.
Default Value: LAN-PORT1
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Alias |
|
|
| cxCfgDot1dBasePortRowStatus |
1.3.6.1.4.1.495.2.1.6.14.3.1.4 |
| Determines the status of the objects in a table row.
Options:
invalid (1): Row is flagged; after the next reset the values will be
disabled and the row will be deleted from the table).
valid (2): Values are enabled.
Default value: valid (2)
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
invalid(1), valid(2) |
|
| cxCfgDot1dBasePortState |
1.3.6.1.4.1.495.2.1.6.14.3.1.5 |
| Determines the state of the STP port.
Options:
On (1): The STP port is set to on.
Off (2): The STP port is set to off.
OnEther (3): The Ethernet STP port will bind to IP.
OnToken (4): The Token Ring STP port will bind to IP.
Default value: On (1)
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(1), off(2), onether(3), ontoken(4) |
|
| cxCfgDot1dBasePortPriority |
1.3.6.1.4.1.495.2.1.6.14.3.1.6 |
| Determines the filtering/forwarding action and the forwarding priority
for data sent from the STP bridge.
Options:
discard (1): Do not forward the data.
forward (2): Forward the data.
priority-low (3): Forward with a low priority (Frame Relay only).
priority-high (4): Forward with a high priority (Frame Relay only).
Default Value: forward (2)
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
discard(1), forward(2), priority-low(3), priority-high(4) |
|
| cxCfgSrBasePortTable |
1.3.6.1.4.1.495.2.1.6.17.1 |
| A table that contains basic information about every port that is associated
with this SR bridge. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CxCfgSrBasePortEntry |
|
| cxCfgSrBasePortEntry |
1.3.6.1.4.1.495.2.1.6.17.1.1 |
| Configuration information for each port of the SR bridge. |
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CxCfgSrBasePortEntry |
|
|
| cxCfgSrBasePort |
1.3.6.1.4.1.495.2.1.6.17.1.1.1 |
| Displays the port number.
Options:
The acceptable values depend on the type of device that you are configuring.
In the CX 900 architecture:
11, 21, 31, 41, 51, 61 or 71. The first digit identifies the slot number
the I/O board resides in, the second digit identifies the number of the port
on the I/O board.
In the CX 1000 architecture:
Accepts only the value '1'. The LAN module only supports 1 port per I/O
board. You distinguish between multiple I/O boards by specifying the slot
number of the I/O board using another object.
Default Value: 1 |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..65535 |
|
| cxCfgSrBasePortIfIndex |
1.3.6.1.4.1.495.2.1.6.17.1.1.2 |
| Displays the table row that contains configuration or monitoring objects
for a specific type of physical interface.
Range of Values: From 1 to the total number of entries in the
Interface Table.
Default Value: '0' indicates there is no corresponding entry in the
Interface Table for this port. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| cxCfgSrBasePortSubnetworkSapAlias |
1.3.6.1.4.1.495.2.1.6.17.1.1.3 |
| Specifies a name (alias) for the physical or convergence port to which this
SR port binds in order to establish a circuit for transmission. This value
must match a physical or convergence port's alias as defined by the object
cxLanIoPortAlias of the cxLanIoPortTable or by the object cxConvPortAlias of
the cxConvTable.
Range of Values: From 1 to 32 alphanumeric characters. You can use any
combination of letters and numbers however, you cannot use blank spaces.
Use a dash or underscore as a delimiter.
Default Value: LAN-PORT1
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Alias |
|
|
| cxCfgSrBasePortRowStatus |
1.3.6.1.4.1.495.2.1.6.17.1.1.4 |
| Determines the status of the objects in a table row.
Options:
invalid (1): Row is flagged. After the next reset the values will be
disabled and the row will be deleted from the table.
valid (2): Values are enabled.
Default Value: (2)
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
invalid(1), valid(2) |
|
| cxCfgSrBasePortState |
1.3.6.1.4.1.495.2.1.6.17.1.1.5 |
| Determines the state of the SR port. You can control activity at the port
by changing this value.
Options:
on (1): The SR port is set to on.
off (2): The SR port is set to off.
OnToken (4): The Token Ring SR port will bind to IP.
Default Value: (1)
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
on(1), off(2), ontoken(3) |
|
| cxCfgSrBasePortPriority |
1.3.6.1.4.1.495.2.1.6.17.1.1.6 |
| Determines the filtering/forwarding action and the forwarding priority
for data sent from the SR bridge.
Options:
discard (1): Do not forward the data.
forward (2): Forward the data.
priority-low (3): Forward with a low priority (Frame Relay only).
priority-high (4): Forward with a high priority (Frame Relay only).
Default value: (2)
Configuration Changed: Administrative |
| Status: mandatory |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
discard(1), forward(2), priority-low(3), priority-high(4) |
|
| cxCfgDot1dBaseMibLevel |
1.3.6.1.4.1.495.2.1.6.14.4 |
| Used to determine current MIB module release supported
by the agent. Object is in decimal. |
| Status: mandatory |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|