CTRON-LFAP-MIB

File: CTRON-LFAP-MIB.mib (24707 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
CTRON-MIB-NAMES

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Counter32
Integer32 Gauge32 MODULE-COMPLIANCE
OBJECT-GROUP PhysAddress ctSystem

Defined Types

FlowPolicyServerAddrEntry  
SEQUENCE    
  flowPolicyServerAddrIndex INTEGER
  flowPolicyServerAddr PhysAddress

Defined Values

ctLFAP 1.3.6.1.4.1.52.4.1.5.11
This mib module defines an SNMP enterprise MIB under Cabletron Enterprise. RFC 2124. Light-weight Flow Admission Protocol.
MODULE-IDENTITY    

flowPolicy 1.3.6.1.4.1.52.4.1.5.11.1
OBJECT IDENTIFIER    

flowPolicyConfig 1.3.6.1.4.1.52.4.1.5.11.1.6
OBJECT IDENTIFIER    

monLfap 1.3.6.1.4.1.52.4.1.5.11.2
OBJECT IDENTIFIER    

monLfapCounts 1.3.6.1.4.1.52.4.1.5.11.2.1
OBJECT IDENTIFIER    

monCxnCounts 1.3.6.1.4.1.52.4.1.5.11.2.2
OBJECT IDENTIFIER    

flowPolicyPolling 1.3.6.1.4.1.52.4.1.5.11.3
OBJECT IDENTIFIER    

flowPolicyControl 1.3.6.1.4.1.52.4.1.5.11.1.1
This object allows flow policy to be enabled or disabled on each switch. Setting this object to disable(1) disables flow policy functionality on the switch. Setting this object to enable(2) enables the flow policy function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

flowPolicyStatus 1.3.6.1.4.1.52.4.1.5.11.1.2
This object gives the status of flow policy processing on each switch. The value of disabled(1) indicates that the flow policy function has been totally disabled. The value of enabled(2) indicates that the flow policy functions have been enabled and is searching for a policy server. The value of active(3) indicates that the flow policy function is fully operational. The value of error(4) indicates that the flow policy function has experienced some fatal error and has disabled itself.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), active(3), error(4)  

flowPolicyActiveServer 1.3.6.1.4.1.52.4.1.5.11.1.3
This object reflects the IP address of the remote policy server currently being used.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

flowPolicyServerAddrTable 1.3.6.1.4.1.52.4.1.5.11.1.4
An ordered list of flow policy server addresses with which flow policy processing will attempt to establish contact.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FlowPolicyServerAddrEntry

flowPolicyServerAddrEntry 1.3.6.1.4.1.52.4.1.5.11.1.4.1
A component entry containing objects for a particular server.
Status: current Access: not-accessible
OBJECT-TYPE    
  FlowPolicyServerAddrEntry  

flowPolicyServerAddrIndex 1.3.6.1.4.1.52.4.1.5.11.1.4.1.1
A unique value for each flow policy server address that indexes the table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

flowPolicyServerAddr 1.3.6.1.4.1.52.4.1.5.11.1.4.1.2
This object contains the address of a flow policy server.
Status: current Access: read-write
OBJECT-TYPE    
  PhysAddress  

flowPolicyConfigPolicy 1.3.6.1.4.1.52.4.1.5.11.1.6.1
This object indicates whether or not the CCE supports connection policy. A value of available(1) indicates that connection policy support is available from this CCE. A value of unavailable(2) indicates that this CCE is incapable of supporting connection policy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER available(1), unavailable(2)  

flowPolicyConfigStatistics 1.3.6.1.4.1.52.4.1.5.11.1.6.2
This object indicates whether or not the CCE supports connection statistics. A value of available(1) indicates that connection statistics are supported from this CCE. A value of unavailable(2) indicates that this CCE is incapable of supporting connection statistics.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER available(1), unavailable(2)  

monLfapFARsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.1
This object contains the number of LFAP FARs sent from the flow control entity (CCE)
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFARsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.2
This object contains the number of LFAP FARs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFAAsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.3
This object contains the number of LFAP FAAs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFAAsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.4
This object contains the number of LFAP FAAs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFAUsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.5
This object contains the number of LFAP FAUs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFAUsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.6
This object contains the number of LFAP FAUs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFUNsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.7
This object contains the number of LFAP FUNs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFUNsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.8
This object contains the number of LFAP FUNs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFUAsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.9
This object contains the number of LFAP FUAs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFUAsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.10
This object contains the number of LFAP FUAs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFCRsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.11
This object contains the number of LFAP FCRs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFCRsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.12
This object contains the number of LFAP FCRs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFCAsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.13
This object contains the number of LFAP FCAs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFCAsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.14
This object contains the number of LFAP FCAs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapARsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.15
This object contains the number of LFAP ARs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapARsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.16
This object contains the number of LFAP ARs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapARAsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.17
This object contains the number of LFAP ARAs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapARAsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.18
This object contains the number of LFAP ARAs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFSNsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.19
This object contains the number of LFAP FSNs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFSNsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.20
This object contains the number of LFAP FSNs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFSAsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.21
This object contains the number of LFAP FSAs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFSAsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.22
This object contains the number of LFAP FSAs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapDroppedMessages 1.3.6.1.4.1.52.4.1.5.11.2.1.23
This object contains the number of Lfap messages which were dropped by the CCE and not sent to the FAS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapVRsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.24
This object contains the number of LFAP VRs sent from the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapVRAsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.25
This object contains the number of LFAP VRAs received by the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapConnSuccess 1.3.6.1.4.1.52.4.1.5.11.2.1.26
This object contains the number of successful connections made from the CCE to server(s).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapConnFailure 1.3.6.1.4.1.52.4.1.5.11.2.1.27
This object contains the number of unsuccessful attempts to connect from the CCE to the server(s).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapBytesSent 1.3.6.1.4.1.52.4.1.5.11.2.1.28
This object contains the total number of bytes sent in messages from the CCE to the server(s).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapBytesReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.29
This object contains the total number of bytes received in messages from the server(s) to the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapMsgsSent 1.3.6.1.4.1.52.4.1.5.11.2.1.30
This object contains the total number of messages sent from the CCE to the server(s).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapMsgsReceived 1.3.6.1.4.1.52.4.1.5.11.2.1.31
This object contains the total number of messages received from the server(s) to the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapMsgsReceivedError 1.3.6.1.4.1.52.4.1.5.11.2.1.32
This object contains the total number of messages received in error from the server(s) to the CCE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapMsgsSendQueue 1.3.6.1.4.1.52.4.1.5.11.2.1.33
This object contains the number of messages currently in the send queue.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

monLfapMsgsSendQueuePeak 1.3.6.1.4.1.52.4.1.5.11.2.1.34
This object contains the peak number of messages in the send queue.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

monLfapMsgsReceiveQueue 1.3.6.1.4.1.52.4.1.5.11.2.1.35
This object contains the number of messages currently in the receive queue.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

monLfapDroppedMessagesConnected 1.3.6.1.4.1.52.4.1.5.11.2.1.36
This object contains the number of LFAP messages which were dropped by the CCE and not sent to the server while the CCE was connected to the server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapDroppedFARs 1.3.6.1.4.1.52.4.1.5.11.2.1.37
This object contains the number of LFAP FARs which were dropped by the CCE and not sent to the server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapDroppedFUNIs 1.3.6.1.4.1.52.4.1.5.11.2.1.38
This object contains the number of LFAP FUN-Inactives which were dropped by the CCE and not sent to the server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapDroppedFUNs 1.3.6.1.4.1.52.4.1.5.11.2.1.39
This object contains the number of LFAP FUN-Updates which were dropped by the CCE and not sent to the server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapDroppedARs 1.3.6.1.4.1.52.4.1.5.11.2.1.40
This object contains the number of LFAP ARs which were dropped by the CCE and not sent to the server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapDroppedARAs 1.3.6.1.4.1.52.4.1.5.11.2.1.41
This object contains the number of LFAP ARAs which were dropped by the CCE and not sent to the server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapDroppedVRs 1.3.6.1.4.1.52.4.1.5.11.2.1.42
This object contains the number of LFAP VRs which were dropped by the CCE and not sent to the server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapYesRespCnt 1.3.6.1.4.1.52.4.1.5.11.2.2.1
This object contains the number of positive LFAP responses received from the FAS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapNoRespCnt 1.3.6.1.4.1.52.4.1.5.11.2.2.2
This object contains the number of negative LFAP responses received from the FAS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFlowSetups 1.3.6.1.4.1.52.4.1.5.11.2.2.3
This object contains the number of flow setups.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFlowTeardowns 1.3.6.1.4.1.52.4.1.5.11.2.2.4
This object contains the number of flow teardowns.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

monLfapFlowActivePeak 1.3.6.1.4.1.52.4.1.5.11.2.2.5
This object contains the peak number of active flows.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

monActiveCxnCnt 1.3.6.1.4.1.52.4.1.5.11.2.2.8
This object contains the number of connections on which statistics are being reported.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

flowPolicyPollingTimerInterval 1.3.6.1.4.1.52.4.1.5.11.3.1
This object contains the number of minutes between statistics polling periods.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1440  

flowPolicyPollingBatchSize 1.3.6.1.4.1.52.4.1.5.11.3.2
This object specifies the number of connections that comprise a batch for polling purposes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2000  

flowPolicyPollingBatchInterval 1.3.6.1.4.1.52.4.1.5.11.3.3
This object contains the current number of milliseconds between statistics polling batches. A polling period is divided into polling batches, the duration between which is calculated by dividing the value of flowPolicyPollingTimerInterval times 60,000 by the number of batches. The number of polling batches is calculated by dividing the actual number of connections by the value of flowPolicyPollingBatchSize. Between batches, the statistics polling mechanism pauses this number of milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

flowPolicyPollingBatchUpdateInterval 1.3.6.1.4.1.52.4.1.5.11.3.4
This object specifies the time in seconds to send flow create and delete information to the server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2000  

flowPolicyPollingLostContactInterval 1.3.6.1.4.1.52.4.1.5.11.3.5
This object specifies the time to wait in seconds until the CCE realizes it has lost contact with a server.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..2000  

flowPolicyPollingServerRetryInterval 1.3.6.1.4.1.52.4.1.5.11.3.6
This object specifies the time in seconds to wait before trying to connect to the server(s) in the list after being unable to connect to any of the server(s).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2000  

flowPolicyPollingSendQueueMaxSize 1.3.6.1.4.1.52.4.1.5.11.3.7
This object specifies the maximum number of messages the send queue can hold before messages are dropped.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 100..2000000  

flowPolicyPollingTaskPriority 1.3.6.1.4.1.52.4.1.5.11.3.8
This object specifies the task priority of LFAP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 50..250  

lfapConformance 1.3.6.1.4.1.52.4.1.5.11.4
OBJECT IDENTIFIER    

lfapCompliances 1.3.6.1.4.1.52.4.1.5.11.4.1
OBJECT IDENTIFIER    

lfapGroups 1.3.6.1.4.1.52.4.1.5.11.4.2
OBJECT IDENTIFIER    

lfapComplianceV10 1.3.6.1.4.1.52.4.1.5.11.4.2.3.1
The compliance statement for the CTRON-LFAP-MIB.
Status: deprecated Access: read-write
MODULE-COMPLIANCE    

lfapComplianceV40 1.3.6.1.4.1.52.4.1.5.11.4.2.4.1
The compliance statement for the CTRON-LFAP-MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

lfapConfGroupV10 1.3.6.1.4.1.52.4.1.5.11.4.2.3
A set of managed objects that make up version 1.0 of the CTRON LFAP MIB.
Status: deprecated Access: read-write
OBJECT-GROUP    

lfapConfGroupV40 1.3.6.1.4.1.52.4.1.5.11.4.2.4
A set of managed objects that make up version 4.0 of the CTRON LFAP MIB.
Status: current Access: read-write
OBJECT-GROUP