CTRON-ETWMIM-MIB

File: CTRON-ETWMIM-MIB.mib (7589 bytes)

Imported modules

RFC-1212 CTRON-MIB-NAMES

Imported symbols

OBJECT-TYPE ctPModuleETWMIM

Defined Values

etwDbExist 1.3.6.1.4.1.52.4.1.1.4.1.1
Denotes whether a T1 daughter board is attached to the Etwmim card being managed
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER exists(1), no-exists(2)  

etwDbEnabled 1.3.6.1.4.1.52.4.1.1.4.1.2
This object exists if etwDbExist is 1. Setting this object to 1 will cause the WAN port to use the daughterboard T1 port. Setting this object to 2 will cause the WAN port to use the synchronous port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

etwDbFracToggle 1.3.6.1.4.1.52.4.1.1.4.1.3
This object exists if etwDbExist is 1. Setting this object to 1 will cause the T1 fractional table to be updated with the new values, as entered. Setting this object to 2, will cause the T1 fractional table to be the table as it is being entered. Setting this object to 3, will cause the T1 fractional table to be the table that is currently in use, regardless of any changes being entered. Setting this object to 4, will cause any changes that have been made to the fractional table since the last update-table to be deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER update-table(1), display-new(2), display-old(3), restore-old(4)  

etwFWRev 1.3.6.1.4.1.52.4.1.1.4.1.4
Denotes the revision of firmware in the module. The format of the string is xx.xx.xx, where the first pair indicates version, and the second pair indicates revision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

etwHWRev 1.3.6.1.4.1.52.4.1.1.4.1.5
Denotes the revision of hardware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

etwEpimEnabled 1.3.6.1.4.1.52.4.1.1.4.1.6
This object gives the status of the EPIM port on the etwmim. A value of 1 indicates that the hardware has been set to use the Epim port for the ethernet connection. A value of 2 indicates that the hardware has been set to use the A channel for the ethernet connection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

etwEpimType 1.3.6.1.4.1.52.4.1.1.4.1.7
Identifies the type of EPIM that is present in the EPIM slot. The value is allocated in the Ctron naming tree.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  


etwClearNvramOnBoot 1.3.6.1.4.1.52.4.1.1.4.1.9
When set to a 1, the system will clear all persistant objects, except for the download objects, from nvram on the next system boot
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER