CTRON-AppleTalk-ROUTER-MIB

File: CTRON-AppleTalk-ROUTER-MIB.mib (123836 bytes)

Imported modules

RFC-1212 RFC1213-MIB ROUTER-OIDS
RFC1155-SMI

Imported symbols

OBJECT-TYPE DisplayString PhysAddress
nwRouter nwRtrProtoSuites Counter
TimeTicks Gauge

Defined Types

AtNetworkNumber  
OCTET STRING Size(2)    

AtDdpNodeAddress  
OCTET STRING Size(3)    

AtName  
OCTET STRING Size(0..32)    

NwAtFwdIfEntry  
SEQUENCE    
  nwAtFwdIfIndex INTEGER
  nwAtFwdIfAdminSTATUS INTEGER
  nwAtFwdIfOperSTATUS INTEGER
  nwAtFwdIfOperationalTime TimeTicks
  nwAtFwdIfControl INTEGER
  nwAtFwdIfMtu INTEGER
  nwAtFwdIfForwarding INTEGER
  nwAtFwdIfFrameType INTEGER
  nwAtFwdIfAclIdentifier INTEGER
  nwAtFwdIfAclSTATUS INTEGER
  nwAtFwdIfCacheControl INTEGER
  nwAtFwdIfCacheEntries Counter
  nwAtFwdIfCacheHits Counter
  nwAtFwdIfCacheMisses Counter

NwAtportEntry  
SEQUENCE    
  nwAtportIndex INTEGER
  nwAtportDescr DisplayString
  nwAtportType INTEGER
  nwAtportNetStart AtNetworkNumber
  nwAtportNetEnd AtNetworkNumber
  nwAtportNetAddress AtDdpNodeAddress
  nwAtportSTATUS INTEGER
  nwAtportNetConfig INTEGER
  nwAtportZoneConfig INTEGER
  nwAtportZoneDefault AtName
  nwAtportIfIndex INTEGER
  nwAtportNetFrom AtDdpNodeAddress
  nwAtportZoneFrom AtDdpNodeAddress
  nwAtportInPkts Counter
  nwAtportOutPkts Counter
  nwAtportHome INTEGER
  nwAtportCurrentZone AtName
  nwAtportConflictPhysAddr OCTET STRING

NwAtFwdIfCtrEntry  
SEQUENCE    
  nwAtFwdIfCtrIfIndex INTEGER
  nwAtFwdIfCtrAdminSTATUS INTEGER
  nwAtFwdIfCtrReset INTEGER
  nwAtFwdIfCtrOperationalTime TimeTicks
  nwAtFwdIfCtrInPkts Counter
  nwAtFwdIfCtrOutPkts Counter
  nwAtFwdIfCtrFwdPkts Counter
  nwAtFwdIfCtrFilteredPkts Counter
  nwAtFwdIfCtrDiscardPkts Counter
  nwAtFwdIfCtrAddrErrPkts Counter
  nwAtFwdIfCtrLenErrPkts Counter
  nwAtFwdIfCtrHdrErrPkts Counter
  nwAtFwdIfCtrInBytes Counter
  nwAtFwdIfCtrOutBytes Counter
  nwAtFwdIfCtrFwdBytes Counter
  nwAtFwdIfCtrFilteredBytes Counter
  nwAtFwdIfCtrDiscardBytes Counter
  nwAtFwdIfCtrHostInPkts Counter
  nwAtFwdIfCtrHostOutPkts Counter
  nwAtFwdIfCtrHostDiscardPkts Counter
  nwAtFwdIfCtrHostInBytes Counter
  nwAtFwdIfCtrHostOutBytes Counter
  nwAtFwdIfCtrHostDiscardBytes Counter

NwAtProtoIfEntry  
SEQUENCE    
  nwAtProtoIfIndex INTEGER
  nwAtProtoIfAdminSTATUS INTEGER
  nwAtProtoIfOperSTATUS INTEGER
  nwAtProtoIfOperationalTime TimeTicks
  nwAtProtoIfVersion INTEGER
  nwAtProtoIfAdvertisement INTEGER
  nwAtProtoIfFloodDelay INTEGER
  nwAtProtoIfRequestDelay INTEGER
  nwAtProtoIfPriority INTEGER
  nwAtProtoIfHelloTimer INTEGER
  nwAtProtoIfSplitHorizon INTEGER
  nwAtProtoIfPoisonReverse INTEGER
  nwAtProtoIfSnooping INTEGER
  nwAtProtoIfType INTEGER
  nwAtProtoIfXmitCost INTEGER
  nwAtProtoIfAclIdentifier INTEGER
  nwAtProtoIfAclSTATUS INTEGER

NwAtProtoIfCtrEntry  
SEQUENCE    
  nwAtProtoIfCtrIfIndex INTEGER
  nwAtProtoIfCtrAdminSTATUS INTEGER
  nwAtProtoIfCtrReset INTEGER
  nwAtProtoIfCtrOperationalTime TimeTicks
  nwAtProtoIfCtrInPkts Counter
  nwAtProtoIfCtrOutPkts Counter
  nwAtProtoIfCtrFilteredPkts Counter
  nwAtProtoIfCtrDiscardPkts Counter
  nwAtProtoIfCtrInBytes Counter
  nwAtProtoIfCtrOutBytes Counter
  nwAtProtoIfCtrFilteredBytes Counter
  nwAtProtoIfCtrDiscardBytes Counter

NwAtFibEntry  
SEQUENCE    
  nwAtFibStartNet AtNetworkNumber
  nwAtFibEndNet AtNetworkNumber
  nwAtFibNextHop AtDdpNodeAddress
  nwAtFibNextHopIf INTEGER
  nwAtFibHops INTEGER
  nwAtFibRouteType INTEGER

NwAtHostCtlEntry  
SEQUENCE    
  nwAtHostCtlIfIndex INTEGER
  nwAtHostCtlAdminSTATUS INTEGER
  nwAtHostCtlOperSTATUS INTEGER
  nwAtHostCtlOperationalTime TimeTicks
  nwAtHostCtlProtocol INTEGER
  nwAtHostCtlSnooping INTEGER
  nwAtHostCtlProxy INTEGER
  nwAtHostCtlCacheMax INTEGER
  nwAtHostCtlCacheSize INTEGER
  nwAtHostCtlNumStatics Counter
  nwAtHostCtlNumDynamics Counter
  nwAtHostCtlCacheHits Counter
  nwAtHostCtlCacheMisses Counter

NwAtAclEntry  
SEQUENCE    
  nwAtAclIdentifier INTEGER
  nwAtAclSequence INTEGER
  nwAtAclPermission INTEGER
  nwAtAclMatches Counter
  nwAtAclDestZone AtName
  nwAtAclSrcZone AtName

NwAtEventFilterEntry  
SEQUENCE    
  nwAtEventFltrProtocol INTEGER
  nwAtEventFltrIfNum INTEGER
  nwAtEventFltrControl INTEGER
  nwAtEventFltrType INTEGER
  nwAtEventFltrSeverity INTEGER
  nwAtEventFltrAction INTEGER

NwAtEventEntry  
SEQUENCE    
  nwAtEventNumber INTEGER
  nwAtEventTime TimeTicks
  nwAtEventType INTEGER
  nwAtEventSeverity INTEGER
  nwAtEventProtocol INTEGER
  nwAtEventIfNum INTEGER
  nwAtEventTextString OCTET STRING

NwAtportZoneEntry  
SEQUENCE    
  nwAtportZonePort INTEGER
  nwAtportZoneName AtName
  nwAtportZoneStatus INTEGER

NwAtHostMapEntry  
SEQUENCE    
  nwAtHostMapIfIndex INTEGER
  nwAtHostMapAtAddr AtDdpNodeAddress
  nwAtHostMapPhysAddr PhysAddress
  nwAtHostMapType INTEGER
  nwAtHostMapCircuitID INTEGER
  nwAtHostMapFraming INTEGER
  nwAtHostMapPortNumber INTEGER

Defined Values

nwRtrExperimental 1.3.6.1.4.1.52.4.2.2.2.4
OBJECT IDENTIFIER    

nwAtRouter 1.3.6.1.4.1.52.4.2.2.2.3.4
OBJECT IDENTIFIER    

nwAtMibs 1.3.6.1.4.1.52.4.2.2.2.3.4.1
OBJECT IDENTIFIER    

nwAtComponents 1.3.6.1.4.1.52.4.2.2.2.3.4.2
OBJECT IDENTIFIER    

nwAtSystem 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1
OBJECT IDENTIFIER    

nwAtForwarding 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2
OBJECT IDENTIFIER    

nwAtTopology 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4
OBJECT IDENTIFIER    

nwAtFib 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5
OBJECT IDENTIFIER    

nwAtEndSystems 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6
OBJECT IDENTIFIER    

nwAtAccessControl 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7
OBJECT IDENTIFIER    

nwAtFilters 1.3.6.1.4.1.52.4.2.2.2.3.4.2.8
OBJECT IDENTIFIER    

nwAtRedirector 1.3.6.1.4.1.52.4.2.2.2.3.4.2.9
OBJECT IDENTIFIER    

nwAtEvent 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10
OBJECT IDENTIFIER    

nwAtWorkGroup 1.3.6.1.4.1.52.4.2.2.2.3.4.2.11
OBJECT IDENTIFIER    

nwAtNetDiag 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12
OBJECT IDENTIFIER    

nwAtSysConfig 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.1
OBJECT IDENTIFIER    

nwAtSysAdministration 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2
OBJECT IDENTIFIER    

nwAtFwdSystem 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1
OBJECT IDENTIFIER    

nwAtFwdInterfaces 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2
OBJECT IDENTIFIER    

nwAtFwdCounters 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1
OBJECT IDENTIFIER    

nwAtFwdIfConfig 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1
OBJECT IDENTIFIER    

nwAtFwdIfCounters 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2
OBJECT IDENTIFIER    

nwAtDistanceVector 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1
OBJECT IDENTIFIER    

nwAtLinkState 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.2
OBJECT IDENTIFIER    

nwAtProto 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1
OBJECT IDENTIFIER    

nwAtProtoSystem 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1
OBJECT IDENTIFIER    

nwAtProtoInterface 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2
OBJECT IDENTIFIER    

nwAtProtoConfig 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1
OBJECT IDENTIFIER    

nwAtProtoCounters 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2
OBJECT IDENTIFIER    

nwAtProtoIfConfig 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1
OBJECT IDENTIFIER    

nwAtProtoIfCounters 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2
OBJECT IDENTIFIER    

nwAtHostsSystem 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1
OBJECT IDENTIFIER    

nwAtHostsInterfaces 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2
OBJECT IDENTIFIER    

nwAtHostsToMedia 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3
OBJECT IDENTIFIER    

nwAtEventLogConfig 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1
OBJECT IDENTIFIER    

nwAtEventLogFilterTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2
OBJECT IDENTIFIER    

nwAtEventLogTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3
OBJECT IDENTIFIER    

nwAtNetDiagPing 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.1
OBJECT IDENTIFIER    

nwAtNetDiagTelnet 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.2
OBJECT IDENTIFIER    

nwAtNetDiagOutbound 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3
OBJECT IDENTIFIER    

nwAtMibRevText 1.3.6.1.4.1.52.4.2.2.2.3.4.1.1
Indicates the current revision level of the Cabletron at Routing Services MIB in textual format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nwAtSysRouterId 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.1.1
The AppleTalk node address used to uniquely identify the host (device) running the AppleTalk Routing Services. The value of nwAtSysRouterId is equal to the highest AppleTalk node address assigned to any router port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtNetworkNumber  

nwAtSysAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.1
Sets the administrative state of AppleTalk Routing Services system wide. Enabled (3) causes AppleTalk Routing Services to become active on all router ports configured and enabled for AppleTalk Routing Services. Disabled (2) causes AppleTalk Routing Services to become inactive system-wide.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtSysOperSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.2
Indicates the operating condition of AppleTalk Routing Services system- wide. The value of nwAtSysOperStatus indicates any problem with your AppleTalk Routing Services configuration. A value of 6 indicates that regardless of the value of nwAtSysAdminStatus, AppleTalk Routing Services is not operating because of an invalid configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6)  

nwAtSysAdminReset 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.3
Resets AppleTalk Routing Services system-wide. Reset (2) forces a restart of AppleTalk Routing Services without a graceful shutdown on any active router ports and without affecting any other routing services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

nwAtSysOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.4
Indicates the elapsed time, in hundredths of a second, that nwAtSysOperStatus has been in its current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtSysVersion 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.5
Indicates the current revision level of the AppleTalk Routing Services firmware, in textual format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nwAtFwdCtrAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.1
Sets the administrative state of the aggregate (system-wide) AppleTalk packet and byte counters. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtFwdCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.2
Reset(2) resets the aggregate (system-wide) AppleTalk packet and byte counters. Reset (2) resets the AppleTalk aggregate counters to 0.nwAtFwdCtrOperationalTime is also reset to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

nwAtFwdCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.3
Indicates the elapsed time, in hundredths of a second, that nwAtFwdCtrAdminStatus has been in the current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtFwdCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.4
Indicates the total number of AppleTalk packets that have been received, system-wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.5
Indicates the total number of AppleTalk packets that have been transmitted, system-wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrFwdPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.6
Indicates the total number of AppleTalk packets that have been forwarded, system-wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.7
Indicates the total number of AppleTalk packets that have been administratively filtered, system-wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.8
Indicates the total number of AppleTalk packets that have been discarded, system-wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrAddrErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.9
Indicates the total number of AppleTalk packets that have been discarded, system-wide, during nwAtFwdCtrOperationalTime because of addressing errors in the AppleTalk header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrLenErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.10
Indicates the total number of AppleTalk packets that have been discarded, system-wide, during nwAtFwdCtrOperationalTime, because an invalid packet length is contained in the AppleTalk header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrHdrErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.11
Indicates the total number of at packets that have been discarded, device-wide, during nwAtFwdCtrOperationalTime, because of an invalid at header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.12
Indicates the total number of bytes in the AppleTalk packets that have been received, system-wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.13
Indicates the total number of bytes in the AppleTalk packets that have been transmitted, system-wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrFwdBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.14
Indicates the total number of bytes in the AppleTalk packets that have been forwarded, system-wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.15
Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, system-wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.16
Indicates the total number of bytes in the AppleTalk packets that have been discarded, system wide, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrHostInPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.17
Indicates the total number of AppleTalk packets that have been successfully delivered to the local host, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrHostOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.18
Indicates the total number of AppleTalk packets that have been transmitted by the local host, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrHostDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.19
Indicates the total number of AppleTalk packets that have been discarded by the local host, during nwAtFwdCtrOperationalTiime, due to a lack of host resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrHostInBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.20
Indicates the total number of bytes in the AppleTalk packets that have been received by the local host, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrHostOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.21
Indicates the total number of bytes in the AppleTalk packets that have been transmitted by the local host, during nwAtFwdCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdCtrHostDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.22
Indicates the total number of bytes in the AppleTalk packets that have been discarded by the local host, during nwAtFwdCtrOperationalTime, due to a lack of host resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1
This table contains an entry for each router port. This table is indexed by nwAtFwdIfIndex, which indicates the value of MIB 2 ifindex, which identifies the router port for which each entry exists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtFwdIfEntry

nwAtFwdIfEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1
Each entry specifies the AppeTalk Routing Services configuration for the router port for which the entry exists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtFwdIfEntry  

nwAtFwdIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.1
Indicates the value of the MIB 2 ifIndex, which identifies the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtFwdIfAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.2
Sets the administrative state of AppleTalk Routing Services on the router port for which the entry exists. Enabled (3) causes AppleTalk Routing Services to become active. Disabled (2) causes it to become inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtFwdIfOperSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.3
Indicates the current operating condition of AppleTalk Routing Services on the AppleTalk router port for which the entry exists. The value of nwAtFwdIfOperStatus indicates any problem with the configuration of AppleTalk Routing Services on the router port. A value of 6 indicates that regardless of the state of nwAtFwdIfAdminStatus AppleTalk Routing Services is not operating because of an invalid port-level configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5), invalid-config(6)  

nwAtFwdIfOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.4
Indicates the elapsed time, in hundredths of a second, that nwAtFwdIfOper Status has been in its current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtFwdIfControl 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.5
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), add(2), delete(3)  

nwAtFwdIfMtu 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.6
Specifies the Maximum Transmissions Unit (MTU) for AppleTalk packets on the router port for which the entry exists. This includes the AppleTalk header and data, but does not include framing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtFwdIfForwarding 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.7
Controls forwarding of AppleTalk packets on the AppleTalk router port for which the entry exists. Enabled (3) causes AppleTalk packets to be forwarded. Disabled (2) prevents AppleTalk packets from being forwarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtFwdIfFrameType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.8
Specifies the framing type for AppleTalk packets forwarded on the router port for which the entry exists. Some frame types are only valid for specific media types. The comments reflect those valid media types.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), ethernet(2), snap(3), nativewan(8), encapenet(9), encapenetsnap(11), encapfddisnap(16), canonical(17)  

nwAtFwdIfAclIdentifier 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.9
Specifies the Access Control ID of the access control list in effect for AppleTalk packets being routed on the router port for which the entry exists. A value of 0 indicates that no access control list is in effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtFwdIfAclSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.10
Controls the operation of any access control list configured for AppleTalk traffic on the router port for which the entry exists. Enabled (3) applies the access control list indicated by the value of nwAtFwdIfAclIdentifier to all AppleTalk traffic being routed on the port. Disabled (2) prevents the access control list from being applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtFwdIfCacheControl 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.11
Controls AppleTalk Address caching on the router port for which the entry exists. When AppleTalk Address caching is enabled, AppleTalk Addresses used for address validation, filtering, and forwarding are stored in the cache. This cache is checked first before doing a full route table lockup, which speeds up the switching process. Enabled (3) turns on AppleTalk Address caching. Disabled (2) turns it off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

nwAtFwdIfCacheEntries 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.12
Indicates the number of entries in the AppleTalk Address cache on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCacheHits 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.13
Indicates the number of times entries in the AppleTalk Address cache have been used to provide the AppleTalk address required to validate, filter, or forward an AppleTalk packet on the router port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCacheMisses 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.14
Indicates the number of times the AppleTalk Address required to validate, filter, or forward an AppleTalk packet on the router port was not found in the AppleTalk Address cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtportTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2
This table contains an entry for each router port configured for AppleTalk Routing Services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtportEntry

nwAtportEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1
Each entry specifies the AppleTalk address information for the router port for which the entry exists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtportEntry  

nwAtportIndex 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.1
Indicates a unique value for each router port. The value of nwAtportIndex is an integer between 1 and the total number of ports configured for AppleTalk Routing Services.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtportDescr 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.2
This text string provides a description of the port to the end-user; it must not contain anything but printable ASCII characters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

nwAtportType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.3
The value of nwArPortType indicates which link-layer protocol is running immediately below DDP in the protocol stack on the router port for which the entry exists. The value of nwAtPortType determines the format of address octet stings throughout the entire AppleTalk MIB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), localtalk(2), ethertalk1(3), ethertalk2(4), tokentalk(5), iptalk(6), serialPPP(7), serialNonstandard(8), virtual(9), fdditalk(10), arctalk(11), smdstalk(12), aurp(13), frameRelay(14), x25(15), ip(16), osi(17), decnetIV(18), arap(19), isdnInThePacketMode(20), nonAppleTalk3Com(21), ipx(22), arns(23), hdlc(24)  

nwAtportNetStart 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.4
The first AppleTalk network address in the network range configured for the port. If the port is not a native AppleTalk port, this object will have the value of two octets of zero. Set this value to the first network address in the network range configured for the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtNetworkNumber  

nwAtportNetEnd 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.5
The last AppleTalk network address in the network range configured for the port. If the network to which this AppleTalk port is connected is a non-extended network, or if it is not a native AppleTalk port, the value for nwAtportNetEnd will be two octets of zero. Set this value to the last network address in the network range configured for the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtNetworkNumber  

nwAtportNetAddress 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.6
The AppleTalk node number configured for the port. This value may be used as a hint for an initial node number used during node-finding. If the port is not a native AppleTalk port, this object shall have the value of three octets of zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtDdpNodeAddress  

nwAtportSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.7
Indicates the current state of the router port's AppleTalk configuration. If either nwAtportNetConfig or nwApportZoneConfig are set to (5), conflictAverseSeed, and either the configured network number range or zone name seeded by the port conflict with the settings of a neighbor router, nwApPortStatus will have a value of (6), offDueToConflict.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER routing(1), unconfigured(2), off(3), invalid(4), endNode(5), offDueToConflict(6), other(7)  

nwAtportNetConfig 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.8
Specifies the network configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER conflictOrientedSeed(1), garnered(2), guessed(3), unconfigured(4), conflictAverseSeed(5), softSeed(6)  

nwAtportZoneConfig 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.9
Specifies the zone information configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER conflictOrientedSeed(1), garnered(2), guessed(3), unconfigured(4), conflictAverseSeed(5), softSeed(6)  

nwAtportZoneDefault 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.10
Specifies the name of the default zone for the port. If the port only has one zone, that zone is represented here. If the port is not a native AppleTalk port, this object will contain an octet string of zero length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtportIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.11
Indicates the value of MIB 2 ifIndex, which identifies the router port for which the entry exists.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtportNetFrom 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.12
When nwAtportNetConfig is set to garnered (2), this variable contains the DDP address of the entity from which the AppleTalk network number was garnered. When nwAtportNetConfig is set to conflictOrientedSeed (1), conflictAverseSeed (5), or softSeed (6), this variable contains the DDP address of an entity which supplied or confirmed the AppleTalk network number. If nwAtportNetConfig is set to guessed (3) or unconfigured (4), or if the AppleTalk Routing Services-enabled device has not received any network number confirmation, this object will be set to three octets of zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtDdpNodeAddress  

nwAtportZoneFrom 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.13
When nwAtportZoneConfig is set to garnered (2), this variable contains the DDP address of the entity from which the AppleTalk Zone List was garnered. When nwAtportZoneConfig is set to conflictOrientedSeed (1), conflictAverseSeed (5), or softSeed (6), this variable contains the DDP address of an entity which supplied or confirmed the AppleTalk zone information. If nwAtportZoneConfig is set to guessed (3) or unconfigured (4), or if the AppleTalk Routing Services-enabled device has not received any zone confirmation, this object will be set to three octets of zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtDdpNodeAddress  

nwAtportInPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.14
The total number of AppleTalk packets received on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtportOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.15
The total number of AppleTalk packets transmitted on the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtportHome 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.16
The value of nwAtportHome indicates whether or not the AppleTalk Routing Services-enabled device, the routing entity, is `homed' on the port for which the entry exists. If the entity is homed on the port, then it could perform NBP (Name Binding Protocol) registrations for services that it chooses to advertise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER home(1), notHome(2)  

nwAtportCurrentZone 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.17
Specifies the current zone name for the port. In general, this is the zone name in which services on the port will be registered. If the port is not a native AppleTalk port, this object will contain an octet string of zero length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtportConflictPhysAddr 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.18
Indicates the link-layer address of the device which caused nwAtportStatus to be set to off (3). If this address is not available, or if nwAtportStatus is not set to off, this object will be a zero length octet string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

nwAtFwdIfCtrTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1
This table contains an entry for each router port configured and enabled for AppleTalk Routing Services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtFwdIfCtrEntry

nwAtFwdIfCtrEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1
Each entry indicates the current packet and byte count of AppleTalk packets on the router port for which the entry exists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtFwdIfCtrEntry  

nwAtFwdIfCtrIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.1
Indicates the value MIB 2 ifindex, which identifies the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtFwdIfCtrAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.2
Sets the administrative state of the per-port AppleTalk packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtFwdIfCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.3
Resets the per-port AppleTalk packet and byte counters on the router port for which the entry exists. Reset (2) resets the counters to 0. nwAtFwdIfCtrOperationalTime is also reset to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

nwAtFwdIfCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.4
Indicates the amount of time, in hundredths of a second, that nwAtFwdIfCtrAdminStatus has been in the current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtFwdIfCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.5
Indicates the total number of AppleTalk packets that have been received, during nwAtFwdIfCtrOperationaltime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.6
Indicates the total number of AppleTalk packets that have been transmitted, during nwAtFwdIfCtrOperationaltime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrFwdPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.7
Indicates the total number of AppleTalk packets that have been forwarded, during nwAtFwdIfCtrOperationaltime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.8
Indicates the total number of AppleTalk packets that have been administratively filtered, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.9
Indicates the total number of AppleTalk packets that have been discarded (dropped), during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrAddrErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.10
Indicates the total number of AppleTalk packets that have been discarded, because of addressing errors in the AppleTalk header, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrLenErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.11
Indicates the total number of AppleTalk packets that have been discarded, because an invalid packet length was contained in the AppleTalk header, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrHdrErrPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.12
Indicates the total number of AppleTalk packets that have been discarded, because of an invalid AppleTalk header, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.13
Indicates the total number of bytes in the AppleTalk packets that have been received, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.14
Indicates the total number of bytes in the AppleTalk packets that have been transmitted, durin nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrFwdBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.15
Indicates the total number of bytes in the AppleTalk packets that have been forwarded, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.16
Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.17
Indicates the total number of bytes in the AppleTalk packets that have been discarded, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrHostInPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.18
Indicates the total number of AppleTalk packets that have been successfully delivered to the local host during nwAtFwdIfCtrOperationalTime, that were received on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrHostOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.19
Indicates the total number of AppleTalk packets that have been transmitted by the local host, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrHostDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.20
Indicates the total number of AppleTalk packets that have been discarded by the local host due to a lack of host resources during nwAtFwdIfCtrOperationalTime, that were received on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrHostInBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.21
Indicates the total number of bytes in the AppleTalk packets that have been successfully delivered to the local host, during nwAtFwdIfCtrOperationalTime, that were received on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrHostOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.22
Indicates the total number of bytes in the AppleTalk packets that have been transmitted by the local host, during nwAtFwdIfCtrOperationalTime, on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFwdIfCtrHostDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.23
Indicates the total number of bytes in the AppleTalk packets that have been discarded by the local host, due to a lack of host resources during nwAtFwdIfCtrOperationalTime, that were received on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.1
Sets the administrative state of the AppleTalk distance-vector based routing protocol system-wide. Enabled (3) causes the routing protocol to become active on all router ports configured and enabled for AppleTalk Routing Services. Disabled (2) causes the routing protocol to become inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtProtoOperSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.2
Indicates the current operating condition of the AppleTalk Routing Services distance-vector-based routing protocol, system-wide. The value of nwAtProtoOperStatus indicates any problem with the routing protocol configuration. A value of 6 indicates that regardless of the value of nwAtProtoAdminStatus, the routing protocol is not operating because of an invalid configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)  

nwAtProtoAdminReset 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.3
Resets the routing protocol. Reset (2) forces a system-wide restart of the protocol without a graceful shutdown on any active router ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

nwAtProtoOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.4
Indicates the elapsed time, in hundredths of a second, that nwAtProtoOperStatus has been in the current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtProtoVersion 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.5
Indicates the current revision level of the AppleTalk routing protocol firmware, in textual format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nwAtProtoStackSize 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.6
Specifies the stack size of the AppleTalk routing protocol thread. In order for a change of this value to take effect, the protocol (nwAtProtoAdminReset), AppleTalk Routing Services (nwAtProtoAdminReset), or the device running Routing Services must be reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoThreadPriority 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.7
Specifies the run-time execution priority of the AppleTalk routing protocol thread. In order for a change of this value to take effect, the AppleTalk protocol (nwAtProtoAdminReset), AppleTalk Routing Services (nwAtProtoAdminReset), or the device running Routing Services must be reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoDatabaseThreshold 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.8
Specifies the run-time maximum number of entries that can be held in the AppleTalk routing protocol route table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoAgeOut 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.9
Specifies the amount of time (in seconds) an inactive entry will be allowed to remain in the AppleTalk routing protocol routing table, before it is deleted, or aged-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoHoldDown 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.10
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoCtrAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.1
Sets the administrative state of the aggregate (system-wide) AppleTalk routing protocol packet and byte counters. Enabled (3)causes these counters to become active. Disabled (2) causes these counters to be come inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtProtoCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.2
Resets the aggregate (system-wide) AppleTalk distance-vector based routing protocol packet and byte counters. Reset (2) resets the AppleTalk aggregate counters to 0. nwAtProtoCtrOperationalTime is also reset to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

nwAtProtoCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.3
Indicates the elapsed time, in hundreds of seconds, that nwAtProtoCtrAdminStatus, has been in the current administrative state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtProtoCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.4
Indicates the total number of AppleTalk routing protocol packets that have been received, system-wide, during nwAtProtoCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.5
Indicates the total number of AppleTalk routing protocol packets that have been transmitted, system-wide, during nwAtProtoCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.6
Indicates the total number of AppleTalk routing protocol packets that have been administratively filtered, system-wide, during nwAtProtoCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.7
Indicates the total number of AppleTalk routing protocol packets that have been discarded, system-wide, during nwAtProtoCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.8
Indicates the total number of bytes in the AppleTalk routing protocol packets that have been received, system-wide, during nwAtProtoCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.9
Indicates the total number of bytes in the AppleTalk routing protocol packets that have been transmitted, system-wide, during nwAtProtoCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.10
Indicates the total number of bytes in the AppleTalk routing protocol packets that have been administratively filtered, system-wide, during nwAtProtoCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.11
Indicates the total number of bytes in the AppleTalk routing protocol packets that have been discarded, system-wide during nwAtProtoCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoIfTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1
This table contains an entry for each router port. Each entry can contain different values, allowing the routing protocol configuration to vary from router port to router port. This table is indexed by nwAtProtoIfIndex, which indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtProtoIfEntry

nwAtProtoIfEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1
Each entry contains the AppleTalk routing protocol configuration for the router port for which the entry exists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtProtoIfEntry  

nwAtProtoIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.1
Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.2
Sets the administrative state of the AppleTalk routing protocol on the router port for which the entry exists. Enabled (3) causes the routing protocol to become active on the router port. Disabled (2) causes it to become inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtProtoIfOperSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.3
Indicates the current operating condition of the AppleTalk routing protocol on the router port for which the entry exists. The value of nwAtProtoIfOperStatus indicates any problem with your AppleTalk routing protocol configuration on the router port. A value of 6 indicates that regardless of the value of nwAtProtoIfAdminStatus, the routing protocol is not operating on the router port because of an invalid configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)  

nwAtProtoIfOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.4
Indicates the elapsed time, in hundreds of seconds, that nwAtProtoIfOperStatus has been in the current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtProtoIfVersion 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.5
Indicates the revision level of AppleTalk routing protocol firmware on the router port for which the entry exists, in textual format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfAdvertisement 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.6
This specifies the periodic interval (in seconds) that the AppleTalk routing protocol agent will advertise routes on this DECnet routing port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfFloodDelay 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.7
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol specific MIBs. Setting this object has no effect
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfRequestDelay 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.8
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol specific MIBs. Setting this object has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfPriority 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.9
Sets the priority of the AppleTalk routing protocol on the router port for which the entry exists.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfHelloTimer 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.10
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol specific MIBs. Setting this object has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfSplitHorizon 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.11
Sets the operating condition of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, the AppleTalk routing protocol keeps track of which router port route information is received on, and prevents information about a route form being sent back out the same router port it was received on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtProtoIfPoisonReverse 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.12
Sets the operating condition of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, the AppleTalk routing protocol advertises any downed routes as unreachable during the period of time that it must wait before removing the route from the route table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtProtoIfSnooping 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.13
Controls the operation of AppleTalk routing protocol Snooping on the router port. When AppleTalk routing protocol Snooping is enabled, the routing protocol operates in passive mode, so that it receives route information, builds and maintains a route table, but does not advertise or send updates on the router port for which the entry exists.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtProtoIfType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.14
Indicates whether the directly connected network segment does or does not support broadcast media access. If broadcast media access is supported, AppleTalk routing protocol advertisements are sent out one broadcast packet per port. If broadcast media is not supported, AppleTalk routing protocol advertisements are sent to each neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), bma(2), nbma(3)  

nwAtProtoIfXmitCost 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.15
Sets the cost of transmitting a packet on the network segment connected to router port for which the entry exists.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfAclIdentifier 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.16
Specifies the Access Control List ID of the access control list in effect for AppleTalk routing protocol packets on the router port for which the entry exists. A value of 0 indicates that there is no access control list in effect for AppleTalk routing protocol packets on the router port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfAclSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.17
Controls the operation of the access control list identified by nwAtProtoIfAclIdentifier. Enabled (3) causes the access control list to be applied to all AppleTalk routing protocol packet traffic on the router port for which the entry exists. Disabled (2) prevents the access control list from being applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtProtoIfCtrTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1
This table contains the AppleTalk packet and byte counters for each router port on this device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtProtoIfCtrEntry

nwAtProtoIfCtrEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1
Each entry specifies the DECnet Phase IV packet and byte counters on a per router port basis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtProtoIfCtrEntry  

nwAtProtoIfCtrIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.1
This is the primary index into the AppleTalk interface counter table. This number corresponds to the index into the mib2 InterfaceTable which describes the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtProtoIfCtrAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.2
Sets the administrative state of the AppleTalk packet and byte counters on the router port for which the entry exists. enabled(3) causes these counters to become active on the configured AppleTalk router port. disabled(2) causes these counters to become inactive on the configured AppleTalk router port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtProtoIfCtrReset 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.3
Resets the AppleTalk packet and byte counters on the router port for which the entry exists. reset (2) resets the interface-specific counters to 0. nwAtProtoIfCtrOperationalTime is also reset to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

nwAtProtoIfCtrOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.4
Indicates the amount of time (No. of time ticks) that the interface-specific AppleTalk packet and byte counters have been active on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtProtoIfCtrInPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.5
Indicates the total number of AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoIfCtrOutPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.6
Indicates the total number of AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoIfCtrFilteredPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.7
Indicates the total number of AppleTalk packets that have been administratively filtered, on the router port for which this entry exists, during nwAtProtoIfCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoIfCtrDiscardPkts 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.8
Indicates the total number of AppleTalk packets that have been discarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoIfCtrInBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.9
Indicates the total number of bytes in the AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoIfCtrOutBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.10
Indicates the total number of bytes in the AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoIfCtrFilteredBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.11
Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, that were received on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtProtoIfCtrDiscardBytes 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.12
Indicates the total number of bytes in the AppleTalk packets that have been discarded, that were received on the router port for which the entry exists, during nwAtIfCtrOperationalTime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtFibTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1
This table contains an entry for each route being used to forward AppleTalk data packets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtFibEntry

nwAtFibEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1
Each entry in the table describes an AppleTalk route to a particular destination.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtFibEntry  

nwAtFibStartNet 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.1
Indicates the start of the network range for the route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtNetworkNumber  

nwAtFibEndNet 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.2
Indicates the end of the network range for the route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtNetworkNumber  

nwAtFibNextHop 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.3
Indicates the full AppleTalk network address of the next hop router for the route. An address of all zeros indicates a directly connected net.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtDdpNodeAddress  

nwAtFibNextHopIf 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.4
Indicates the value of MIB 2 ifindex, which identifies the router port through which the next hop node exists. Packets destined for the network specified by the entry will be forwarded on this router port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtFibHops 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.5
Indicates the number of hops required to reach the destination for which the entry exists. It is considered as metric 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtFibRouteType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.6
Indicates the type of route (Allows for PPP entries later).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), appleTalk(2)  

nwAtHostsTimeToLive 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1.1
Indicates the amount of time (in minutes) that an entry can remain in the AARP cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtHostsRetryCount 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1.2
Indicates the maximum number of times AppleTalk Routing Services will retry each attempt to resolve a host address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtHostCtlTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1
This table contains the control information for maintaining an AARP cache on each router port. Note that the cache entries are maintained by theAppleTalk Address Resolution Protocol Table of the AppleTalk MIB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtHostCtlEntry

nwAtHostCtlEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1
Each entry contains the control information for the ARP cache on the router port indicated by the value nwAtHostCtlIfIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtHostCtlEntry  

nwAtHostCtlIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.1
Indicates the value of MIB2 ifindex, which identifies the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtHostCtlAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.2
Sets the administrative state of the AARP cache on the router port for which the entry exists. Enabled (3) causes AARP caching to become active. Disabled (2) causes AARP caching to perform a graceful shutdown.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

nwAtHostCtlOperSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.3
Indicates the current operating condition of the AARP Table on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5)  

nwAtHostCtlOperationalTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.4
Indicates the amount of time, in hundredths of a second, that nwAtHostCtlOperStatus has been in the current state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtHostCtlProtocol 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.5
Controls the operation of the AARP protocol on the router port for which the entry exists.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

nwAtHostCtlSnooping 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.6
Controls AARP Snooping on the router port for which the entry exists. Given the AARP protocol is enabled, setting nwAtHostCtlIfSnooping to enabled (3) turns on AARP Snooping. When AARP Snooping is enabled the source AppleTalk and physical addresses of all AARP packets received on the router port are added to the AARP Table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

nwAtHostCtlProxy 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.7
This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

nwAtHostCtlCacheMax 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.8
Indicates the maximum number of entry slots the AARP cache can consist of. nwAtHostCtlCacheMax cannot be set to less than 16. Setting this value does not allocate any memory for the cache.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtHostCtlCacheSize 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.9
Indicates the current number of entry slots in the AARP cache on the router port for which the entry exists. The cache automatically resizes to accommodate all entries up to the maximum number of entries set by nwAtHostCtlCacheMax.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtHostCtlNumStatics 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.10
Indicates the total number of static entries in the AARP cache on the router port for which the entry exists. Static entries remain in the cache until they are administratively removed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtHostCtlNumDynamics 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.11
Indicates the number of dynamic entries in the AARP cache on the router port for which the entry exists. Dynamic entries area added and aged out by the AARP protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtHostCtlCacheHits 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.12
Indicates the number of times an entry in the AARP cache has been used to successfully provide the physical address required to forward an AppleTalk packet on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtHostCtlCacheMisses 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.13
Indicates the number of times the physical address required to forward an AppleTalk packet has not been found in the AARP cache on the router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtAclValidEntries 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.1
Indicates the number of valid entries that exist in the Access Control List Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nwAtAclTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2
This table contains the Access Control List information for theAppleTalk protocol. This table contains entries, each of which allows packet forwarding between source/destination pairs to be permitted or denied. The particular list is identified by the access control list ID. Each list may contain multiple entries ordered by sequence number. When a particular access control list is searched, it is searched in sequence number order and the first match found ends the search. If no match is found, access defaults to permitted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtAclEntry

nwAtAclEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1
Each entry contains AppleTalk source/destination access information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtAclEntry  

nwAtAclIdentifier 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.1
This is the primary (major) index into the AppleTalk access control list table. Essentially, this identifies the access control list by a unique identifier (at least 1) and is arbitrarily assigned by the user. All entries that have the same ID belong to the same access control list.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtAclSequence 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.2
This is the secondary (minor) index into the AppleTalk access control list table. This number corresponds to a sequence number used to order multiple entries within the same access control list.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtAclPermission 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.3
Specifies whether access is allowed or denied between the source and destination address pairs. Note that source and destination are interchangeable when bi-directional control is selected. To remove an existing entry set invalid (2), and it will disappear after reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), permit(3), deny(4), permit-bidirectional(5), deny-bidirectional(6)  

nwAtAclMatches 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.4
Indicates the number of matches on this entry that have resulted in the access restriction permit/deny being applied as part of the forwarding process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwAtAclDestZone 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.5
Specifies the destination zone name used to compare for matches on the access control list.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtAclSrcZone 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.6
Specifies the source zone to be used to compare for matches on the access control list.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtEventAdminSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.1
Sets the administrative state of AppleTalk event logging. Enabled (3) causes the event log to become active. Disabled (2) causes the event log to become inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtEventMaxEntries 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.2
Sets the maximum number of entries allowed in the event log table. When the number of entries reaches the value of nwAtEventMaxEntries the first (oldest) entry is deleted to allow a new entry to be added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtEventTraceAll 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.3
Enabled (3) allows logging of all event types on all router ports from all protocols and components. Disabled (2) causes the event log filter table to specify which events to log.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

nwAtEventFilterTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1
This table contains an entry for each event filter configured for AppleTalk Routing Service's events.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtEventFilterEntry

nwAtEventFilterEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1
Each entry describes an event filter which defines a particular type of event to be logged to the event log. The value of nwIpEventProtocol indicates the value used in either the nwRtgProtocolTable or the nwComponentTable Cabletron Routing Services MIB, which indentifies the protocol to which the entry exists.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtEventFilterEntry  

nwAtEventFltrProtocol 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.1
Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentRtgInstance, which identifies the protocol involved in the event for which the event filter exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtEventFltrIfNum 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.2
Specifies the router port involved in the event for which the event filter exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtEventFltrControl 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.3
Set this value to 3 to add the entry to the event log table. Set this value to 2 to remove the entry from the event filter table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2), add(3)  

nwAtEventFltrType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.4
This 6 bit mask specifies the types of events to be logged. By default all 6 bits are set to 1, indicating that all types of events are to be logged. Setting any bit to 0 removes an event type from this field and prevents that type of event from being logged. Setting any bit to 1 adds an event type to this field and enables that type of event to be logged.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER misc(1), timer(2), rcv(4), xmit(8), event(16), error(32)  

nwAtEventFltrSeverity 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.5
Specifies the level of severity an event must meet in order to be logged. Controls the amount of event logging by ignoring events of a lower priority than specified by this filter value. `Highmed' ignores only events of the lowest severity. `Highlow' logs all events highest priority through lowest. `Highest' severity causes all events except those of the highest severity to be ignored. `Highmed' severity is the default setting which causes only events of the lowest severity to be ignored. `Highlow' severity logs all events, regardless of severity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER highest(1), highmed(2), highlow(3)  

nwAtEventFltrAction 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.6
Specifies how the events are to be logged. Logging to the `log' stores the events in the event log table (nwIpEventFltrAction). Logging to `trap' sends events out through the trap mechanism.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER log(1), trap(2), log-trap(3)  

nwAtEventTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1
This table contains an entry for each event that has been logged.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtEventEntry

nwAtEventEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1
Each entry contains the information about an event that has been logged to the event table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtEventEntry  

nwAtEventNumber 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.1
An ordinal value assigned to the event for which the log entry exists. nwAtEvnetNumber is assigned so that each event in the event log can be uniquely identified by the value of nwAtEventNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtEventTime 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.2
Indicates the time at which the event was logged to the event log
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

nwAtEventType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.3
Indicates the type of event that was logged.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER misc(1), timer(2), rcv(4), xmit(8), event(16), error(32)  

nwAtEventSeverity 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.4
Indicates the severity that was assigned to this event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER highest(1), highmed(2), highlow(3)  

nwAtEventProtocol 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.5
Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentInstance which identifies the protocol or component that was involved in the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtEventIfNum 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.6
Indicates the router port that was involved in the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtEventTextString 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.7
Contains the actual text string that was logged.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

nwAtNetDiagOutboundNetAddress 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.1
The AppleTalk Network Address of a node with which the diagnostic test will directly correspond.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtDdpNodeAddress  

nwAtNetDiagOutboundPort 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.2
An integer representing the port through which the diagnostic test will broadcast or multicast packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtNetDiagOutboundTimeout 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.3
An integer representing the number of seconds before a diagnostic request will time out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtNetDiagOutboundRetries 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.4
An integer representing the number of times a request will be repeated before failure.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtNetDiagOutboundATEchoType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.5
The type of echo diagnostic function to initiate. Upon setting this to send EchoRequest (2), an echo request will be initiated and the value will be set to noAction (1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), sendEchoRequest(2), other(3)  

nwAtNetDiagOutboundATEchoStatus 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.6
The current status of the echo diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), inProgress(2), timeout(3), success(4)  

nwAtNetDiagOutboundNBPEntityObject 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.7
The entity object or wildcard object used in the NBP lookup diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtNetDiagOutboundNBPEntityType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.8
The entity type or wildcard type used in the NBP lookup diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtNetDiagOutboundNBPEntityZone 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.9
The entity zone used in the NBP lookup diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtNetDiagOutboundNBPType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.10
Specifies the type of outbound NBP diagnostic function to initiate. Upon setting this value to any value other than noAction (1) or other (10), the corresponding request will be made and the value will be set to noAction (1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), localRequest(2), lookupMcast(3), lookupBcast(4), lookupDirect(5), bcastRequestBcast(6), bcastRequestDirect(7), forwardRequestBcast(8), forwardRequestDirect(9), other(10)  

nwAtNetDiagOutboundNBPStatus 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.11
Indicates the current status of the outbound NBP diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), inProgress(2), done(3)  

nwAtNetDiagOutboundRTMPType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.12
The type of outbound RTMP diagnostic function to initiate. Upon setting this value to a value other than noAction(1) or other(8), the corresponding request will be initiated and the value will be set to noAction(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), sendRequest(2), bcastRequest(3), sendRDRequestSplitHorizon(4), bcastRDRequestSplitHorizon(5), sendRDRequestFullTable(6), bcastRDRequestFullTable(7), other(8)  

nwAtNetDiagOutboundRTMPStatus 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.13
The current status of the outbound RTMP diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), inProgress(2), done(3)  

nwAtNetDiagOutboundRTMPNetStart 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.14
The start of the network range from the last successful outbound RTMP request or route data request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtNetworkNumber  

nwAtNetDiagOutboundRTMPNetEnd 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.15
The end of the network range from the last successful outbound RTMP request or route data request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtNetworkNumber  

nwAtNetDiagOutboundZIPType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.16
The type of outbound ZIP diagnostic function to initiate. Upon setting this value to a value other than noAction(1) or other(8), the corresponding request will be initiated and the value will be set to noAction(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), sendQuery(2), bcastQuery(3), sendGetZonesList(4), sendGetLocalZones(5), sendGetMyZone(6), sendGetNetInfo(7), bcastGetNetInfo(8), other(9)  

nwAtNetDiagOutboundZIPStatus 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.17
The current status of the outbound ZIP diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), queryInProgress(2), atpInProgress(3), gniInProgress(4), done(5)  

nwAtNetDiagOutboundZIPQueryNet 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.18
The start of the network range to send ZIP query for.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtNetworkNumber  

nwAtNetDiagOutboundZIPQueryZone 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.19
The first zone from the last successful ZIP query.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtNetDiagOutboundZIPGetNetInfoZone 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.20
The zone name to be used in a ZIP get-net-info request diagnostic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtNetDiagOutboundZIPGetNetInfoNetStart 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.21
The start of the network range from the last successful ZIP get-net-info request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtNetworkNumber  

nwAtNetDiagOutboundZIPGetNetInfoNetEnd 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.22
The end of the network range from the last successful ZIP get-net-info request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtNetworkNumber  

nwAtNetDiagOutboundZIPGetNetInfoMulticast 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.23
The data-link multicast address from the last successful ZIP get-net-info request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

nwAtNetDiagOutboundZIPGetNetInfoDefaultZone 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.24
The default zone name from the last successful ZIP get-net-info request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtName  

nwAtportZoneTable 1.3.6.1.4.1.52.4.2.2.2.4.1
The table of zone information for non-default zones on ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtportZoneEntry

nwAtportZoneEntry 1.3.6.1.4.1.52.4.2.2.2.4.1.1
An entry of zone information for a port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtportZoneEntry  

nwAtportZonePort 1.3.6.1.4.1.52.4.2.2.2.4.1.1.1
An integer representing the port to which this zone belongs. The port identified by a particular value of this object is the same port as identified by the same value of nwAtportIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtportZoneName 1.3.6.1.4.1.52.4.2.2.2.4.1.1.2
A zone name configured for the AppleTalk port referred to in the corresponding entry of nwAtportZonePort. When this value is changed in a router, the router must send a zipNotify packet on the associated network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtName  

nwAtportZoneStatus 1.3.6.1.4.1.52.4.2.2.2.4.1.1.3
The status of this zone entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwAtportZoneTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nwAtportZoneStatus object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

nwAtHostMapTable 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1
The Ip Address translation table used for mapping an IP address to physical address, framing, port and circuit identifier, if applicable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NwAtHostMapEntry

nwAtHostMapEntry 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1
Each entry contains one AtNetworkNumber to 'physical' address equivalence, including a circuit identifier if applicable. Also provided is the framing and port number required to converse with this host.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NwAtHostMapEntry  

nwAtHostMapIfIndex 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.1
This is the primary (major) index into the HostMap table. This number corresponds to the index into the MIB-2 Interfaces Group which describes the IP router port for which the entry exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nwAtHostMapAtAddr 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.2
The AtDdpNodeAddress corresponding to the media-dependent 'physical' address and circuit identifier (if applic).
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtDdpNodeAddress  

nwAtHostMapPhysAddr 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.3
The media-dependent 'physical' address. The value of this object is 0 for entries indicating native-wan(8) framing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PhysAddress  

nwAtHostMapType 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.4
Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwAtHostMapTable. That is, it effectively dissasociates the circuit identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nwAtHostMapType object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), dynamic(3), static(4), inactive(5)  

nwAtHostMapCircuitID 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.5
The identifier for the virtual circuit present on the interface. On an interface configured for Frame Relay, this number is the DLCI for the IP Address at the end of the circuit. For non-WAN interfaces, the value of this object is zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwAtHostMapFraming 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.6
Specifies the framing type required to converse with the host for which this entry exists.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), ethernet(2), snap(3), nativewan(8), encapenet(9), encapenetsnap(11), encapfddisnap(16), canonical(17)  

nwAtHostMapPortNumber 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.7
The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of interfaces in the system and the number of circuits present on interfaces which are of WAN type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor